BioData-Sh Jaideep Gupta-CELE
•
2 likes•844 views
This document is a curriculum vitae for Dr. Jaideep Gupta, who works as the Chief Electrical Engineer (Loco) for the Indian Railway Service of Electrical Engineers. He has over 28 years of experience working in various management roles across several divisions of Indian Railways. He has received commendations for his work on locomotive maintenance and for promoting the use of Rajbhasha. The CV lists his educational qualifications, publications, training programs attended, conferences participated in, and personal details.
Report
Share
Report
Share
Download to read offline
Recommended
oxygen sensor
The document discusses oxygen sensors, which measure the proportion of oxygen in exhaust gases. It describes how oxygen sensors were developed in the 1960s and have since been important for pollution control in automobiles. The document outlines different types of oxygen sensors, including those used in automobile exhaust systems to optimize air-fuel ratios and reduce emissions. It explains how oxygen sensors work and the factors that determine their performance.
ERTMS Presentation
ERTMS is a new railway signalling and train control system being implemented across Europe to replace existing national systems and enable cross-border travel. It uses in-cab displays and train-to-ground communication via trackside balises (Level 1), or GSM-R radio (Level 2), or without trackside equipment (Level 3). The UK is currently implementing ERTMS on the Thameslink route, upgrading from 16 to 24 trains per hour, with the national implementation plan delayed until Thameslink is complete. ERTMS aims to increase capacity, interoperability and safety across Europe's rail networks.
Vocational training presentation on Railway Communication System
The document provides information on the Indian Railway communication system. It discusses key parts of the railway communication network including Railnet, the passenger reservation system (PRS), and the freight operation information system (FOIS). It describes the methods of communication used in railways such as optical fiber, microwave transmission, radio, and telephone. It also outlines the network components that enable communication, including routers, switches, firewalls, and network interface cards.
Railway Industrial Training Report
This document provides a summary of the author's summer training internship at the Divisional Railway Manager Office in Ajmer. It discusses the railway communication systems used including the automatic electronic exchange, C-DOT electronic exchange, important exchange cards, call processing, and interactive voice response, passenger reservation, and optical fiber communication systems. The training covered various technical aspects of the railway working systems including RAILNET, microwave communication, and signaling departments.
signals and GSM-R in railway ppt
This presentation discusses signaling and telecommunication systems used in Indian Railways. It describes the different types of organizations within Indian Railways and focuses on Type III and V organizations like RITES, IRCON and CONCOR that provide consultancy services. The presentation provides an overview of the signaling systems used in railways including semaphore signals, color light signals, and different types of reception and dispatch signals. It also discusses electrical point machines, data loggers and communication systems used in train control rooms. Limitations of current separate railway communication systems are highlighted.
Structure of sed revised
The document outlines the structure and functions of the School Education Department of Punjab, Pakistan. It describes how the department is responsible for primary, elementary, and secondary education. It oversees curriculum development, textbook production, teacher training, student assessments, and ensuring quality education. The department aims to achieve goals like 100% enrollment, retention, and improving literacy and numeracy rates through various initiatives.
Railway Industrial Training
The document summarizes an industrial training presentation at the Government Engineering College in Ajmer about communications systems used in Indian railways. It discusses the key communication mediums like overhead lines and optical fiber cables. It then explains various digital systems used for tasks like freight tracking (FOIS), reservations (PRS), ticketing (UTS), signaling, and more. The document provides an overview of the different railway zones and their divisions across India and concludes with references used in the presentation.
Challenges in higher education with special reference to physical education
This presentation attempts to list down the challenges in higher education in India with special reference to Physical Education
Recommended
oxygen sensor
The document discusses oxygen sensors, which measure the proportion of oxygen in exhaust gases. It describes how oxygen sensors were developed in the 1960s and have since been important for pollution control in automobiles. The document outlines different types of oxygen sensors, including those used in automobile exhaust systems to optimize air-fuel ratios and reduce emissions. It explains how oxygen sensors work and the factors that determine their performance.
ERTMS Presentation
ERTMS is a new railway signalling and train control system being implemented across Europe to replace existing national systems and enable cross-border travel. It uses in-cab displays and train-to-ground communication via trackside balises (Level 1), or GSM-R radio (Level 2), or without trackside equipment (Level 3). The UK is currently implementing ERTMS on the Thameslink route, upgrading from 16 to 24 trains per hour, with the national implementation plan delayed until Thameslink is complete. ERTMS aims to increase capacity, interoperability and safety across Europe's rail networks.
Vocational training presentation on Railway Communication System
The document provides information on the Indian Railway communication system. It discusses key parts of the railway communication network including Railnet, the passenger reservation system (PRS), and the freight operation information system (FOIS). It describes the methods of communication used in railways such as optical fiber, microwave transmission, radio, and telephone. It also outlines the network components that enable communication, including routers, switches, firewalls, and network interface cards.
Railway Industrial Training Report
This document provides a summary of the author's summer training internship at the Divisional Railway Manager Office in Ajmer. It discusses the railway communication systems used including the automatic electronic exchange, C-DOT electronic exchange, important exchange cards, call processing, and interactive voice response, passenger reservation, and optical fiber communication systems. The training covered various technical aspects of the railway working systems including RAILNET, microwave communication, and signaling departments.
signals and GSM-R in railway ppt
This presentation discusses signaling and telecommunication systems used in Indian Railways. It describes the different types of organizations within Indian Railways and focuses on Type III and V organizations like RITES, IRCON and CONCOR that provide consultancy services. The presentation provides an overview of the signaling systems used in railways including semaphore signals, color light signals, and different types of reception and dispatch signals. It also discusses electrical point machines, data loggers and communication systems used in train control rooms. Limitations of current separate railway communication systems are highlighted.
Structure of sed revised
The document outlines the structure and functions of the School Education Department of Punjab, Pakistan. It describes how the department is responsible for primary, elementary, and secondary education. It oversees curriculum development, textbook production, teacher training, student assessments, and ensuring quality education. The department aims to achieve goals like 100% enrollment, retention, and improving literacy and numeracy rates through various initiatives.
Railway Industrial Training
The document summarizes an industrial training presentation at the Government Engineering College in Ajmer about communications systems used in Indian railways. It discusses the key communication mediums like overhead lines and optical fiber cables. It then explains various digital systems used for tasks like freight tracking (FOIS), reservations (PRS), ticketing (UTS), signaling, and more. The document provides an overview of the different railway zones and their divisions across India and concludes with references used in the presentation.
Challenges in higher education with special reference to physical education
This presentation attempts to list down the challenges in higher education in India with special reference to Physical Education
communication system in railways
The document discusses the railway communication system in India, including Railnet which allows passengers to access information online, as well as FOIS which manages various railway operations. It describes the methods of communication used in railways like optical fiber, microwave, radio, and telephone, as well as the transmission methods of PDH, SDH, and WDM. The network components that support railway communication are also outlined, including routers, switches, firewalls, and network interface cards.
Monorail Presentation
These slides are made only for college presentation.
It include details about the Monorail project of Mumbai and other future projects..
Automatic railway gate control
The document describes an automatic railway gate control system using a microcontroller. It detects when a train is approaching using sensors 5km from the gate. It then warns road users with lights and a buzzer and checks for vehicles near the gate. If no vehicles are detected, the gate closes. When the train passes 1km beyond the gate, sensors detect this and the gate reopens. The system provides safety benefits over manual operation by reducing wait times and preventing accidents.
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...WRI Ross Center for Sustainable Cities
This document discusses transportation issues in Bangalore and initiatives underway to address them. It notes that while public transportation improvements and non-motorized transport infrastructure are receiving attention, road infrastructure expansion, especially elevated corridors in the city center, continues to be emphasized. To ensure a sustainable transportation future for Bangalore, the document argues that greater priority needs to be given to rapidly increasing mass transit supply through metro expansion, improving multimodal integration, pedestrian environments, promotion of non-motorized transport, and correct pricing of private vehicle use instead of their promotion. City planning must also promote sustainable transportation options.indian railway signal system ppt
This document discusses railway signaling and communication systems in India. It provides background on Indian Railways, the largest commercial employer in the world. It then describes different types of railway signaling such as block signaling and color light signaling used to safely direct train traffic. Interlocking systems using mechanical and electrical devices are also discussed to prevent conflicting train movements. The document concludes by covering various wired and wireless communication systems used by Indian Railways including microwave transmission, overhead lines, and optical fiber networks.
DIAGNOSTIC DEVICES.pptx
Diagnostic medical equipment is used in hospitals and clinics to diagnose patients' conditions. This includes laboratory equipment like cell blood counters, arterial blood gas analyzers, spectrophotometers, and microscopes. It also includes devices like electrocardiographs, electroencephalographs, electromyographs, patient monitors, pulse oximeters, pH meters, and thermometers. These devices help evaluate patients internally, detect any abnormalities, and allow doctors to precisely analyze organ function.
Railway training ppt
The document provides an overview of various topics related to railway signaling and communication systems used in the Kota division of Indian Railways. It discusses the role of the Divisional Railway Manager and describes four branches under DRM Kota. It then summarizes signaling systems including semaphore and color light signals. Other topics covered in brief include track circuits, points, data loggers, microwave communication, optical fiber communication, and their applications in railways.
Introduction to Railway Signalling
Signalling in railways involves conveying information to loco drivers through visual or audible signals to control train movement. There are two main signalling systems - time interval and space interval. Space interval method divides tracks into blocks and uses fixed signals like semaphore or colour light signals to indicate if a block is occupied or clear. Solid state interlocking (SSI) systems have replaced older relay-based interlocking to reduce costs and improve maintainability through use of electronic components instead of relays.
Summer training from Indian Railway ppt (2)
The document discusses technologies used in Indian Railways. It describes the Integrated Passenger Information System (IPIS) which provides audio and visual arrival/departure information to passengers. It also discusses Railnet, the internal communication network for Indian Railways, and various communication systems used like microwave and optical fiber. The document also summarizes the passenger reservation system, signaling systems and some interesting facts about Indian Railways.
1 pro ppt
This document provides an overview of training for election officials in Thiruvananthapuram district for the 2021 Kerala state legislative assembly elections. It discusses the roles and responsibilities of presiding officers and outlines the procedures they must follow before, during, and after polling day, including setting up the polling station, conducting mock polls, sealing EVMs and voting machines, and documenting the process. The training aims to ensure free, fair, and transparent elections in accordance with Election Commission of India guidelines.
Automatic Train Control System using Wireless Sensor Networks
This document outlines an automatic train control system for railways using a wireless sensor network. It begins with an introduction and motivation for the project, describing the current railway signalling architecture and opportunities for improvement. The document then presents the author's field study and interactions with railway officials. It proposes a new WSN-based architecture and algorithms for train detection, clearance seeking, data aggregation and topology maintenance. It concludes with an overview of the simulation implementation in TinyOS and TOSSIM to test the proposed system and algorithms.
Syamnaresh_Garlapati_CV
Dr. Syamnaresh Garlapati is seeking a full-time position in an academic or research environment in electrical engineering. He holds a Ph.D. from the University of Padua in Italy and has published several papers in international conferences. His research focuses on fault tolerant power electronics systems. He has work experience as an assistant professor and his areas of interest include power electronics, digital electronics, and control systems.
Annual report 2019
This document provides a summary of the qualifications and experience of Dr. Sri Niwas Singh, the Vice Chancellor of Madan Mohan Malaviya University of Technology Gorakhpur. It lists his educational background which includes a Ph.D. from IIT Kanpur, areas of research interest in power systems, over 450 publications, experience in various academic and administrative roles, and numerous awards and honors for his contributions to engineering education and research.
Cv abhisek pal
Abhisek Pal received the B.Tech degree in Electrical Engineering from BIET, WB, India in 2010, and the M.Tech degree in Electrical Engineering (sp. Power Electronics & Drives) from Jalpaiguri Govt. Engg. College,WB, India in 2012. He was an Assistant Professor for two years at BCETW, Durgapur, WB and currently pursuing the Ph.D. degree at Indian School of Mines, Dhanbad, India.
His current research interests include Electrical Machines, Drives & Power Electronics, Electric Vehicles, Sensorless speed control, Hybrid FOC-DTC technique, Artificial Intelligence and Energy Efficiency Improvements in Electric Drives.
Cv abhisek pal
The document is a two-page curriculum vitae for Abhisek Pal that outlines his educational and professional background. It details his current position as a Junior Research Fellow at the Indian School of Mines, along with his previous role as an Assistant Professor. His research focuses on developing an improved energy efficient speed sensorless control scheme for induction motor drives in electric vehicles. The CV also lists his educational qualifications, technical skills, publications, conferences attended, training experience, projects, and personal details.
Cv abhisek pal
Abhisek Pal received the B.Tech degree in Electrical Engineering from BIET, WB, India in 2010, and the M.Tech degree in Electrical Engineering (sp. Power Electronics & Drives) from Jalpaiguri Govt. Engg. College,WB, India in 2012. He was an Assistant Professor for two years at BCETW, Durgapur, WB and currently pursuing the Ph.D. degree at Indian School of Mines, Dhanbad, India.
His current research interests include Electrical Machines, Drives & Power Electronics, Electric Vehicles, Sensorless speed control, Hybrid FOC-DTC technique, Artificial Intelligence and Energy Efficiency Improvements in Electric Drives.
Jaswant singh cv- 14-may_2018 (1)
1. This curriculum vitae is for Jaswant Singh, who has over 7 years of experience working as an Assistant Professor of Electrical Engineering.
2. He has an M.Tech in Power Electronics and Drive from Kamla Nehru Institute of Technology and a B.Tech in Electrical Engineering.
3. His work experience includes positions as Assistant Professor at various colleges and universities since 2011, where he taught courses in power electronics, electrical machines, and more. He has also held administrative roles like Head of Department.
Jaswant singh cv- 14-may_2018 (1)
This curriculum vitae summarizes the qualifications and experience of Jaswant Singh. He has over 7 years of experience working as an Assistant Professor. He holds an M.Tech in Power Electronics and Drive and has taught courses in power electronics, electrical machines, and electric drives at the undergraduate and postgraduate levels. He has published over 10 papers in international journals and conferences on topics related to power electronics, electric drives, and renewable energy.
M.Venkateshkumar Profile
This document provides a summary of M. Venkateshkumar's career and qualifications. It lists his educational background which includes a Ph.D in Renewable Energy, M.E. in Power Systems, and B.E. in Electrical and Electronics Engineering. It details his work experience as an Assistant Professor at various institutions over 8 years. It also lists his technical skills, publications, awards, funded projects, IEEE responsibilities, and objective of joining as an Assistant Professor.
Suresh
M.Suresh is pursuing a PhD in electrical engineering at Anna University under the guidance of Dr. R. Meenakumari. He has a Master's degree in power electronics and drives from Anna University and is currently an assistant professor teaching various electrical engineering courses. His research focuses on renewable energy systems including optimization of integrated renewable energy systems and torque ripple reduction in induction machines. He has published several papers in journals and conferences and has experience organizing workshops.
Resume ( Pankaj Negi)
Pankaj Negi is seeking a challenging position utilizing his skills and 8 years of teaching experience. He has a Ph.D in progress, M.Tech in Electronics, B.Tech in Instrumentation & Control, and PGDCA. His areas of expertise include renewable energy, analog and digital electronics, and control systems. He has published papers in national and international conferences and journals on topics like full adders and hydro power plant control. He is currently an Assistant Professor researching grid-connected PV systems stability.
CV-K.S.K.Achary
K Sujita Kumar Achary is a temporary faculty member in the Department of Electrical and Electronics Engineering at the National Institute of Technology Tiruchirappalli. He received his M.Tech. from NIT Tiruchirappalli in 2016 with a CGPA of 9.89 and his B.Tech from Veer Surendra Sai University of Technology Burla in 2012 with a CGPA of 8.39. His areas of interest include power system protection, transmission and distribution, and electrical machines. He has published conference papers on modeling the impact of SVC and series compensation on distance protection and has developed an adaptive design for distance relays for series compensated transmission lines.
More Related Content
What's hot
communication system in railways
The document discusses the railway communication system in India, including Railnet which allows passengers to access information online, as well as FOIS which manages various railway operations. It describes the methods of communication used in railways like optical fiber, microwave, radio, and telephone, as well as the transmission methods of PDH, SDH, and WDM. The network components that support railway communication are also outlined, including routers, switches, firewalls, and network interface cards.
Monorail Presentation
These slides are made only for college presentation.
It include details about the Monorail project of Mumbai and other future projects..
Automatic railway gate control
The document describes an automatic railway gate control system using a microcontroller. It detects when a train is approaching using sensors 5km from the gate. It then warns road users with lights and a buzzer and checks for vehicles near the gate. If no vehicles are detected, the gate closes. When the train passes 1km beyond the gate, sensors detect this and the gate reopens. The system provides safety benefits over manual operation by reducing wait times and preventing accidents.
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...WRI Ross Center for Sustainable Cities
This document discusses transportation issues in Bangalore and initiatives underway to address them. It notes that while public transportation improvements and non-motorized transport infrastructure are receiving attention, road infrastructure expansion, especially elevated corridors in the city center, continues to be emphasized. To ensure a sustainable transportation future for Bangalore, the document argues that greater priority needs to be given to rapidly increasing mass transit supply through metro expansion, improving multimodal integration, pedestrian environments, promotion of non-motorized transport, and correct pricing of private vehicle use instead of their promotion. City planning must also promote sustainable transportation options.indian railway signal system ppt
This document discusses railway signaling and communication systems in India. It provides background on Indian Railways, the largest commercial employer in the world. It then describes different types of railway signaling such as block signaling and color light signaling used to safely direct train traffic. Interlocking systems using mechanical and electrical devices are also discussed to prevent conflicting train movements. The document concludes by covering various wired and wireless communication systems used by Indian Railways including microwave transmission, overhead lines, and optical fiber networks.
DIAGNOSTIC DEVICES.pptx
Diagnostic medical equipment is used in hospitals and clinics to diagnose patients' conditions. This includes laboratory equipment like cell blood counters, arterial blood gas analyzers, spectrophotometers, and microscopes. It also includes devices like electrocardiographs, electroencephalographs, electromyographs, patient monitors, pulse oximeters, pH meters, and thermometers. These devices help evaluate patients internally, detect any abnormalities, and allow doctors to precisely analyze organ function.
Railway training ppt
The document provides an overview of various topics related to railway signaling and communication systems used in the Kota division of Indian Railways. It discusses the role of the Divisional Railway Manager and describes four branches under DRM Kota. It then summarizes signaling systems including semaphore and color light signals. Other topics covered in brief include track circuits, points, data loggers, microwave communication, optical fiber communication, and their applications in railways.
Introduction to Railway Signalling
Signalling in railways involves conveying information to loco drivers through visual or audible signals to control train movement. There are two main signalling systems - time interval and space interval. Space interval method divides tracks into blocks and uses fixed signals like semaphore or colour light signals to indicate if a block is occupied or clear. Solid state interlocking (SSI) systems have replaced older relay-based interlocking to reduce costs and improve maintainability through use of electronic components instead of relays.
Summer training from Indian Railway ppt (2)
The document discusses technologies used in Indian Railways. It describes the Integrated Passenger Information System (IPIS) which provides audio and visual arrival/departure information to passengers. It also discusses Railnet, the internal communication network for Indian Railways, and various communication systems used like microwave and optical fiber. The document also summarizes the passenger reservation system, signaling systems and some interesting facts about Indian Railways.
1 pro ppt
This document provides an overview of training for election officials in Thiruvananthapuram district for the 2021 Kerala state legislative assembly elections. It discusses the roles and responsibilities of presiding officers and outlines the procedures they must follow before, during, and after polling day, including setting up the polling station, conducting mock polls, sealing EVMs and voting machines, and documenting the process. The training aims to ensure free, fair, and transparent elections in accordance with Election Commission of India guidelines.
Automatic Train Control System using Wireless Sensor Networks
This document outlines an automatic train control system for railways using a wireless sensor network. It begins with an introduction and motivation for the project, describing the current railway signalling architecture and opportunities for improvement. The document then presents the author's field study and interactions with railway officials. It proposes a new WSN-based architecture and algorithms for train detection, clearance seeking, data aggregation and topology maintenance. It concludes with an overview of the simulation implementation in TinyOS and TOSSIM to test the proposed system and algorithms.
What's hot (11)
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...
An Integrated Transport Systems Approach to Solving Bangalore's Mobility Prob...
Automatic Train Control System using Wireless Sensor Networks
Automatic Train Control System using Wireless Sensor Networks
Similar to BioData-Sh Jaideep Gupta-CELE
Syamnaresh_Garlapati_CV
Dr. Syamnaresh Garlapati is seeking a full-time position in an academic or research environment in electrical engineering. He holds a Ph.D. from the University of Padua in Italy and has published several papers in international conferences. His research focuses on fault tolerant power electronics systems. He has work experience as an assistant professor and his areas of interest include power electronics, digital electronics, and control systems.
Annual report 2019
This document provides a summary of the qualifications and experience of Dr. Sri Niwas Singh, the Vice Chancellor of Madan Mohan Malaviya University of Technology Gorakhpur. It lists his educational background which includes a Ph.D. from IIT Kanpur, areas of research interest in power systems, over 450 publications, experience in various academic and administrative roles, and numerous awards and honors for his contributions to engineering education and research.
Cv abhisek pal
Abhisek Pal received the B.Tech degree in Electrical Engineering from BIET, WB, India in 2010, and the M.Tech degree in Electrical Engineering (sp. Power Electronics & Drives) from Jalpaiguri Govt. Engg. College,WB, India in 2012. He was an Assistant Professor for two years at BCETW, Durgapur, WB and currently pursuing the Ph.D. degree at Indian School of Mines, Dhanbad, India.
His current research interests include Electrical Machines, Drives & Power Electronics, Electric Vehicles, Sensorless speed control, Hybrid FOC-DTC technique, Artificial Intelligence and Energy Efficiency Improvements in Electric Drives.
Cv abhisek pal
The document is a two-page curriculum vitae for Abhisek Pal that outlines his educational and professional background. It details his current position as a Junior Research Fellow at the Indian School of Mines, along with his previous role as an Assistant Professor. His research focuses on developing an improved energy efficient speed sensorless control scheme for induction motor drives in electric vehicles. The CV also lists his educational qualifications, technical skills, publications, conferences attended, training experience, projects, and personal details.
Cv abhisek pal
Abhisek Pal received the B.Tech degree in Electrical Engineering from BIET, WB, India in 2010, and the M.Tech degree in Electrical Engineering (sp. Power Electronics & Drives) from Jalpaiguri Govt. Engg. College,WB, India in 2012. He was an Assistant Professor for two years at BCETW, Durgapur, WB and currently pursuing the Ph.D. degree at Indian School of Mines, Dhanbad, India.
His current research interests include Electrical Machines, Drives & Power Electronics, Electric Vehicles, Sensorless speed control, Hybrid FOC-DTC technique, Artificial Intelligence and Energy Efficiency Improvements in Electric Drives.
Jaswant singh cv- 14-may_2018 (1)
1. This curriculum vitae is for Jaswant Singh, who has over 7 years of experience working as an Assistant Professor of Electrical Engineering.
2. He has an M.Tech in Power Electronics and Drive from Kamla Nehru Institute of Technology and a B.Tech in Electrical Engineering.
3. His work experience includes positions as Assistant Professor at various colleges and universities since 2011, where he taught courses in power electronics, electrical machines, and more. He has also held administrative roles like Head of Department.
Jaswant singh cv- 14-may_2018 (1)
This curriculum vitae summarizes the qualifications and experience of Jaswant Singh. He has over 7 years of experience working as an Assistant Professor. He holds an M.Tech in Power Electronics and Drive and has taught courses in power electronics, electrical machines, and electric drives at the undergraduate and postgraduate levels. He has published over 10 papers in international journals and conferences on topics related to power electronics, electric drives, and renewable energy.
M.Venkateshkumar Profile
This document provides a summary of M. Venkateshkumar's career and qualifications. It lists his educational background which includes a Ph.D in Renewable Energy, M.E. in Power Systems, and B.E. in Electrical and Electronics Engineering. It details his work experience as an Assistant Professor at various institutions over 8 years. It also lists his technical skills, publications, awards, funded projects, IEEE responsibilities, and objective of joining as an Assistant Professor.
Suresh
M.Suresh is pursuing a PhD in electrical engineering at Anna University under the guidance of Dr. R. Meenakumari. He has a Master's degree in power electronics and drives from Anna University and is currently an assistant professor teaching various electrical engineering courses. His research focuses on renewable energy systems including optimization of integrated renewable energy systems and torque ripple reduction in induction machines. He has published several papers in journals and conferences and has experience organizing workshops.
Resume ( Pankaj Negi)
Pankaj Negi is seeking a challenging position utilizing his skills and 8 years of teaching experience. He has a Ph.D in progress, M.Tech in Electronics, B.Tech in Instrumentation & Control, and PGDCA. His areas of expertise include renewable energy, analog and digital electronics, and control systems. He has published papers in national and international conferences and journals on topics like full adders and hydro power plant control. He is currently an Assistant Professor researching grid-connected PV systems stability.
CV-K.S.K.Achary
K Sujita Kumar Achary is a temporary faculty member in the Department of Electrical and Electronics Engineering at the National Institute of Technology Tiruchirappalli. He received his M.Tech. from NIT Tiruchirappalli in 2016 with a CGPA of 9.89 and his B.Tech from Veer Surendra Sai University of Technology Burla in 2012 with a CGPA of 8.39. His areas of interest include power system protection, transmission and distribution, and electrical machines. He has published conference papers on modeling the impact of SVC and series compensation on distance protection and has developed an adaptive design for distance relays for series compensated transmission lines.
sss_CV_2014
Dr. Shashikant Sadistap is a Senior Principal Scientist at the Central Electronics Engineering Research Institute in Pilani, India. He has 27 years of experience developing embedded systems and real-time instrumentation for applications in water, aquaculture, power electronics, and agriculture. Some of his areas of expertise include intelligent instrumentation, embedded systems design, and soft computing for smart sensors and systems. He has successfully completed 16 major projects and transferred technologies to industries and government organizations.
world.docx
This document provides information about a seminar presentation given by a student. It includes details such as the student's name, USN number, seminar title on stepper motor drives for robotic applications, and a brief description of stepper motors and their suitability for robotics. It also lists two reference papers on stepper motor motion/control and stepper motor drives for robotic applications that were cited for the seminar topic.
world.docx
This document provides information about a seminar presentation given by a student. It includes details such as the student's name, USN number, seminar title on stepper motor drives for robotic applications, and a brief description of stepper motors and their suitability for robotics. It also lists two reference papers on stepper motor motion/control and stepper motor drives for robotic applications that were cited for the seminar topic.
world.docx
This document provides information about a seminar presentation given by a student. It includes details such as the student's name, USN number, seminar title on stepper motor drives for robotic applications, and a brief description of stepper motors and their suitability for robotics. It also lists two reference papers on stepper motor motion/control and stepper motor drives for robotic applications that were cited for the seminar topic.
JMS CV new
Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying semiconductor devices. He received his M.Tech from NIT Silchar in microelectronics and VLSI design with a CPI of 9.35/10 and B.Tech from NIT Agartala in electronics and communication engineering with a CPI of 8.17/10. His Ph.D project involves modeling attributes of silicon nanowire FETs using TCAD tools. He has worked on GaN HEMTs and published papers on their characteristics. His objective is to pursue a career in teaching and research in electronics and communication engineering.
Joydip jana resume
Joydip Jana is a Renewable Energy Researcher & presently working in the field of Grid Integration of Renewable Energy, Smart Microgrid, Storage Systems including Super Capacitor and Vanadium Redox Battery etc. with Indian Institute of Engineering Science & Technology (IIEST), Shibpur. Currently he is involved in a project “Advanced Research on Thin Film Silicon Solar Cell & PV Systems” funded by Ministry of New and Renewable Energy (MNRE) of Govt. of India and implemented by IIEST, Shibpur. The project includes design, development and field testing of MPPT based high efficiency inverters and grid synchronizing system components used in grid interactive roof top PV systems and design, field-testing and performance evaluation of BIPV system in Indian Institute of Engineering Science & Technology (IIEST), Shibpur, West Bengal, India. He has worked with RRCAT, a centre of Bhaba Atomic Research Centre (BARC), Govt. of India for setting up a Digital Fast Feedback Control System using FPGA for RF Signals in the particle accelerator installed in RRCAT, Indore. He published several papers in different national & international conferences and journal and wrote a book chapter on “Solar PV Power Generation” in “Advances in Solar Energy Science & Engineering, Vol.1” published by National Institute of Solar Energy (NISE), Govt. of India. He was involved in a project for set up 100kW Grid-Tied solar power plant at State Bank of India, Sammridhhi Bhavan, Local Head Office, Kolkata for providing consultancy services for preparation of synopsis of tenders (Technical & Commercial), pre-bid design, drawing & BOQ preparation, vendor selection, site visit, site layout, Engineering drawing preparation, system design with PVSyst software, making mechanical, electrical and structural drawing using AutoCAD software, design, selection of SPV modules and BOS, site supervision and commissioning of the project. He successfully designed, developed & installed solar system in Electric Vehicle application in the year 2015.
JMS CV new
1) Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying microelectronics and VLSI. He received his M.Tech from NIT Silchar and B.Tech from NIT Agartala.
2) His PhD project involves modeling attributes of Silicon nanowire FET devices. His past projects include studying DC and microwave characteristics of InAlN/GaN HEMTs and implementing Booth's multiplier algorithm using Verilog.
3) He has published papers in international journals and conferences and attended several workshops and seminars. His areas of interest include semiconductor device modeling and physics.
JMS CV new
Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying microelectronics and VLSI. He received his M.Tech from NIT Silchar in microelectronics and VLSI design with a CPI of 9.35/10 and B.Tech from NIT Agartala in electronics and communication engineering with a CPI of 8.17/10. His objective is to pursue graduate studies in electronics and communication engineering leading to a career in teaching and research. His major projects include characterizing and modeling silicon nanowire FETs and studying DC and microwave characteristics of InAlN/GaN HEMTs. He has published papers in international conferences and journals
D.C. Pathiray Resume
An energetic mechanical engineer with experience designing medical gas piping systems seeks new challenges. The engineer currently works as a project engineer overseeing installations and maintenance for over 70 medical gas systems. Previous experience includes teaching engineering courses and training in fabrication, welding, and maintenance. Skilled in CAD, building services, and thermal applications, the engineer is eager to take on new problems.
Similar to BioData-Sh Jaideep Gupta-CELE (20)
BioData-Sh Jaideep Gupta-CELE
- 1. CURRICULUM VITAE Dr. Jaideep Gupta, FIE Indian Railway Service of Electrical Engineers (IRSEE : 1986 Exam Batch) Chief Electrical Engineer (Loco) Special Assignments. Worked as Additional Divisional Railway Manager and was responsible for the entire operation and Human Resource work of around 17,000 employee of Nagpur division. Worked as Officer on Special Duty (OSD) with Bharat Heavy Electrical Limited (A Maharatna Company) for 3 years and assisted the Maharatna Company to complete the prestigious order of 200 AC Locomotives in stipulated time frame. Worked as Director, Centre for Advanced Maintenance Technology, Gwalior, for 3 years and was responsible for formulating, documenting and standardising the maintenance practices and procedures of Railway locomotives for reliable and efficient operation. Previous Assignments. Over 28 years intensive/extensive experience of working at various levels of management of rail network from field level to management level in Western Railway, SER, NCR, Central Railways and BHEL (Maharatna PSU). Formulation, implementation and monitoring of railway operations in different important divisions of Indian Railways. Formulation, implementation and monitoring of railway safety management systems. Awards. Commendation from General Manager for excellence in Maintenance and Reliability of electric locomotives in Bodamunda Loco Shed SE Rly. Railway Minister Rajbhasha Award for the use of Rajbhasha in technical activities of Railways. Training. International: Attended the management programme at INSEAD Singapore. Attended management programme, ICLIF at Kaula Lumpur, Malaysia. National: Attended number of technical and management programme in NAIR/Vadodara and IREEN/Nasik.
- 2. Seminars / Conferences. Attended IEEE sponsored International conference on “Recent Application of Sort Computing in Engineering and Technology”. Attended national seminar on “Application of Mathematics in Engineering & Technology”. Attended national Level Conference on “Recent Trends in Information and Communication Technology (RTICT 2009)”. Attended and presented technical papers in number of seminars organised by different technical institutes. Publications. Attached in Annexure “A”. Personnel Details. Date of Birth : 30.08.1965 Qualification : BE(Electrical) in 1986 (Gold Medalist) M. Tech - Electrical Engineering (Machines and Drives) from IT, BHU Ph.D.- From Rajiv Gandhi Proudyogiki Vishwavidyalaya (Madhya Pradesh Technical University), Bhopal in Electrical Engineering. Title of the thesis- Intelligent Diagnostic and Monitoring of Electrical Drives – A Predictive maintenance Strategy for Locomotive Auxiliary Machines. Present Address- Office : Chief Electrical Engineer (Loco), West Central Railway, General Manager’s Office, In front of Indira Market, Annex Building-1, 3rd Floor, Jabalpur – 482 001. Residence : Bungalow no. C-50, Dharampeth Rail Enclave, Civil Lines, Nagpur – 440 001. Mob. : 97663 42001, 9752415304 E_mail : guptajaideep@yahoo.com Hobbies. Writing Poems. Collection of Hindi Poems “ 'kCnksa ds ijs ” – Under Publication. Performed in different poetry recital programmes in All India Radio local centres. Singing and Music. Sports – Badminton, Cricket, Aquatics – Was manager of BNR aquatics team.
- 3. Annexure “A” LIST OF PAPERS PUBLISHED Gupta Jaideep, Wadhwani A.K. Wadhwani S., “Statistical Analysis of Vibration Signals – a Predictive Maintenance Strategy for Locomotive Auxiliary Drives” ICFAI Journal of Electrical & Electronics Engineering, October, 2009, II(4): pp.77-85. “Improved Performance through Intelligent Condition Based Maintenance of Rail Locomotives” Journal of The Institution of Engineers (India), (communicated). “Condition Based Predictive Maintenance Strategy for Electrical Machines – a User’s perspective” The IUP Journal for Electrical & Electronics Engineering, (Accepted for publication). “Vibration Monitoring and Analysis, a Tool to Predictive Maintenance of Rotating Machines” IEEE sponsored International conference on “Recent Application of Soft Computing in Engineering and Technology” in Dec.2007. pp. 563-569. “Wavelet Transform: an Effective Tool for Vibration Based Monitoring of Induction Motors” National seminar on “Application of Mathematics in Engineering & Technology” in Feb 2008. pp. 68-70. “Application of Vibration Diagnostics in Transport Industry and its Peculiarities” National Level Conference on “Recent Trends in Information and Communication Technology (RTICT 2009)” Bannari Amman Institute of Technology Sathyamangalam Tamil Nadu. “Neutral Network Based Online Condition Monitoring of Railway Locomotive Equipment using Wavelet Transform” International Conference on Arts, Science, Management and Engineering organized by Cogent International and KLS Gogte Institute of Technology, Belgaum, Karnataka, INDIA.