Starter generator-sg500 from ePropelled
•
0 likes•34 views
ePropelled SG500 series are the most versatile starter generators in their category. The slim line design boasts a patent pending active air-cooling system that allows it to operate in temperatures in excess of 180°C in certain applications.
Report
Share
Report
Share
Download to read offline
Recommended
Starter generator - from ePropelled
The permanent magnet brushless starter generator SG3000 is a critical component for ensuring the electrical system can meet the design objectives of the UAV
Starter generator SG12000
The SG12000 starter generator from ePropelled is designed for UAV applications. It has the lowest weight in its class with high power density. It uses a brushless permanent magnet outer rotor design and has an optional bearingless mounting and active air-cooling system that allows it to operate up to 180°C. The specifications document provides details on its mechanical dimensions, electrical ratings, and environmental operating limits.
Starter Generator - from ePropelled
The ePropelled SG6000 starter generator is designed for UAV applications. It has a slim, lightweight design with active air cooling that allows it to operate up to 180°C. It uses a patent-pending bearingless mounting system and has high power density. Specifications include a diameter of 7.32 inches, weight of 5.4 pounds, and peak power output of 8% below its rated maximum continuous power for 5 minutes. It requires consistent airflow of at least 2m/s to maintain performance levels.
Qnergy Powergen Remote Power Series
Designed for rugged and remote operation, the PowerGen remote power generator provides reliable electrical power supply to the most demanding and mission-critical loads. Based on Qnergy’s no-maintenance and highly reliable PCK series Stirling engines, the generator package can work seamlessly with a variety of fuel supplies, including: natural gas, propane, ethane, biogas, and multiple associated gas streams. By means of its flexible and modular design, this generator package can be tailored to provide a broad range of power output architectures to meet the electrical requirements of each specific site load.
Proudly launching our energy saving precision chiller
This document describes a line of high efficiency and reliable precision cooling chillers from GKL with ±0.1°C accuracy. The GKE line uses inverter drive compressors and electronic expansion valves for improved efficiency and capacity control compared to the GKL model. Capacities range from 12KW to 90KW at specified conditions. Power consumption can be up to 50% lower at half rated capacity. Inverter controlled pumps are optionally available for improved efficiency compared to standard fixed speed pumps. Pictures show several customer installations with descriptions including model, customer, delivery date, and key features.
Blue 'e' leaflet
Enclosure Cooling units used for heat dissipation and maintain the ambient temperature within the enclosure.
Wind turbine blade design
This document discusses various design considerations for wind turbine blades. It begins by explaining how wind power is calculated based on swept area, wind speed, and air density. It then discusses different blade designs including the number of blades (one, two, or three blades are common), blade composition (wood, metal, fiberglass are options), construction techniques, airfoil shape to maximize lift and minimize drag, and twist and taper along the blade's length. Additional topics covered include tip-speed ratio, performance curves, the Betz limit on maximum energy capture, rotor solidity, pitch control mechanisms, and blade manufacturing processes. The document concludes by discussing classroom wind turbine blade challenge activities.
Turboexpander - Gear - Generator
This document discusses using a turboexpander, gearbox, and generator system to generate electric power from a gas pressure reduction station. It explains that a turboexpander's performance depends on inlet flow, pressure, and temperature. Using a gearbox between the turboexpander and generator allows the turboexpander to operate at a higher, more efficient speed than the generator, increasing power output. A case study shows that using a gearbox can increase power generation by 96% compared to direct coupling without a gearbox. The document concludes that while a gearbox increases capital costs, it can improve the revenue from additional power generation.
Recommended
Starter generator - from ePropelled
The permanent magnet brushless starter generator SG3000 is a critical component for ensuring the electrical system can meet the design objectives of the UAV
Starter generator SG12000
The SG12000 starter generator from ePropelled is designed for UAV applications. It has the lowest weight in its class with high power density. It uses a brushless permanent magnet outer rotor design and has an optional bearingless mounting and active air-cooling system that allows it to operate up to 180°C. The specifications document provides details on its mechanical dimensions, electrical ratings, and environmental operating limits.
Starter Generator - from ePropelled
The ePropelled SG6000 starter generator is designed for UAV applications. It has a slim, lightweight design with active air cooling that allows it to operate up to 180°C. It uses a patent-pending bearingless mounting system and has high power density. Specifications include a diameter of 7.32 inches, weight of 5.4 pounds, and peak power output of 8% below its rated maximum continuous power for 5 minutes. It requires consistent airflow of at least 2m/s to maintain performance levels.
Qnergy Powergen Remote Power Series
Designed for rugged and remote operation, the PowerGen remote power generator provides reliable electrical power supply to the most demanding and mission-critical loads. Based on Qnergy’s no-maintenance and highly reliable PCK series Stirling engines, the generator package can work seamlessly with a variety of fuel supplies, including: natural gas, propane, ethane, biogas, and multiple associated gas streams. By means of its flexible and modular design, this generator package can be tailored to provide a broad range of power output architectures to meet the electrical requirements of each specific site load.
Proudly launching our energy saving precision chiller
This document describes a line of high efficiency and reliable precision cooling chillers from GKL with ±0.1°C accuracy. The GKE line uses inverter drive compressors and electronic expansion valves for improved efficiency and capacity control compared to the GKL model. Capacities range from 12KW to 90KW at specified conditions. Power consumption can be up to 50% lower at half rated capacity. Inverter controlled pumps are optionally available for improved efficiency compared to standard fixed speed pumps. Pictures show several customer installations with descriptions including model, customer, delivery date, and key features.
Blue 'e' leaflet
Enclosure Cooling units used for heat dissipation and maintain the ambient temperature within the enclosure.
Wind turbine blade design
This document discusses various design considerations for wind turbine blades. It begins by explaining how wind power is calculated based on swept area, wind speed, and air density. It then discusses different blade designs including the number of blades (one, two, or three blades are common), blade composition (wood, metal, fiberglass are options), construction techniques, airfoil shape to maximize lift and minimize drag, and twist and taper along the blade's length. Additional topics covered include tip-speed ratio, performance curves, the Betz limit on maximum energy capture, rotor solidity, pitch control mechanisms, and blade manufacturing processes. The document concludes by discussing classroom wind turbine blade challenge activities.
Turboexpander - Gear - Generator
This document discusses using a turboexpander, gearbox, and generator system to generate electric power from a gas pressure reduction station. It explains that a turboexpander's performance depends on inlet flow, pressure, and temperature. Using a gearbox between the turboexpander and generator allows the turboexpander to operate at a higher, more efficient speed than the generator, increasing power output. A case study shows that using a gearbox can increase power generation by 96% compared to direct coupling without a gearbox. The document concludes that while a gearbox increases capital costs, it can improve the revenue from additional power generation.
Renewable Energy Applications & Innovations
The companies of Altra Industrial Motion offer many critical drivetrain products utilized in renewable energy applications including brakes, power packs, geared motors, couplings, shaft locking devices and linear actuators.
Turbine blade faliure
The document discusses a compressor blade failure analysis. It notes that the blade failed due to fatigue originating from machining marks at the blade hub-stem junction on the leading edge side. Nickel-based blades are now commonly used instead of earlier cobalt-based blades, as nickel-based blades can withstand higher temperatures and have a longer lifespan, though cobalt blades previously had an even longer lifespan. The analysis procedure described examines blade microstructure and composition at different sections to determine the failure cause.
vertical axis wind turbine
This presentation summarizes the generation of direct current (DC) using a vertical axis wind turbine (VAWT). It includes a block diagram of the VAWT system, measurements of wind speed and velocity, descriptions of the project components including the permanent magnet generator, blades, and a graph of the results. The team designed and tested a VAWT that converts kinetic wind energy to mechanical power using a generator, then to DC power which is stored or used to power loads.
AW3000
ACCIONA Windpower has seen explosive growth of orders for its AW3000 platform. This success is due to a track record of reliability and product innovation coming from one of the most experienced wind energy companies in the world. The latest evolution is the AW132/3000 for low-wind sites, which delivers the lowest cost of energy in this segment. Partner with ACCIONA Windpower to make your projects rise above the competition.
Is Your Industrial Combustion Equipment Reliable?
Crane Composites realized their air heaters for 5 ovens were out of standards and unreliable. They hired Stelter & Brinck to upgrade the heaters. Stelter & Brinck custom designed upgrades for each oven zone. The upgrades decreased shutdowns and downtime by over 70% for Crane Composites, reduced maintenance expenses, and helped meet EPA standards.
Blauboxeen
Ventilation units for efficient supply ventilation in various premises.
Controllable air supply, heating and filtration.
Compatible with Ø100 up to 315 mm round air ducts.
Tooling Technology - Quick Change Locks
With Tooling Technology’s Quick Change systems, we have made the lean principle of “Quick Changeover” fast and simple. Designed to locate and lock with a high level of accuracy and repeatability. Perfect for Robotics, Automation, Manufacturing, Defense, and more.
Power generation using neodymium magnets in Vertical Axis Wind Turbine
The objectives of our Experimental Setup are as follows:
Design calculations of rotor axle, bearings and stator coil
CAD design of various components of VAWT, like Hub, Axle, Blade Supports and Spoke Flange
Analysis of Hub in NX-NASTRAN 9.0
Fabrication of individual components of the setup
Assembly of VAWT
Testing of Experimental Setup
Results
guaglobal.com
The document describes the features of the VertiGO vertical axis wind turbine system. Some key features include a low start up wind speed of 0.5m/s, resistance to high storm winds up to 160km/h, compatibility with both on-grid and off-grid installations, ability to generate power in low wind speeds, and international patent protection. It provides detailed technical specifications and performance comparisons for various VertiGO turbine models ranging from 5KW to 50KW.
Acclerometer Part 14
An accelerometer is a device that measures proper acceleration ("g-force"). Proper acceleration is not the same as coordinate acceleration (rate of change of velocity). For example, an accelerometer at rest on the surface of the Earth will measure an acceleration g= 9.81 m/s2 straight upwards. By contrast, accelerometers in free fall orbiting and accelerating due to the gravity of Earth will measure zero.
Accelerometers have multiple applications in industry and science. Highly sensitive accelerometers are components of inertial navigation systems for aircraft and missiles.
DESIGN OPTIMIZATION OF WIND TURBINE BLADE
The objective of this project is to design a wind turbine that is optimized for the constraints that come with residential use. The main tasks of this project are:
> To study the design process and methodology of wind turbine
> Derive the Blade Element Momentum (BEM) theory then use it to conduct a parametric study that will determine if the optimized values of blade pitch and chord length create the most efficient blade geometry
> Analyse different air-foils to determine which one creates the most efficient wind turbine blade.
Computational flow optimization of Wind turbine blades
This project aims to analyze the aerodynamics of a horizontal axis wind turbine using computational fluid dynamics (CFD) software. The analysis compares the performance of blades with different airfoil profiles including NACA-9417, MH-102, and SC 02-0714 at various angles of attack. Additional analyses are conducted with a blade featuring a winglet add-on and with a three-blade rotor assembly. Results show improvements in lift, drag, and lift-to-drag ratio from the winglet. Visualizations of pressure, velocity, and turbulence are also presented.
CARNOT ENGINE Priyanka kushwah
The document discusses Sadi Carnot's ideal Carnot engine from 1824. The Carnot engine is a theoretical, reversible engine that operates between a hot reservoir at temperature T1 and a cold reservoir at temperature T2. It provides the maximum possible efficiency for converting heat into work, with its efficiency depending only on the temperatures of the reservoirs. The main components of the Carnot engine are an infinite heat source, an infinite heat sink, a perfect insulating plate, and a frictionless piston-cylinder assembly containing the working gas.
Which generator is best for use in the home
Utility power supply in India is erratic and unpredictable. Power failures range from 2 to 4 hours in cities and 8 hours or more in small towns and villages.
Wind Farms
The document discusses various conventional and non-conventional energy sources. It describes coal, oil, natural gas, oil shale, tar sands and nuclear power as conventional sources. It then discusses wind turbines and wind farms as non-conventional sources, explaining their components and how they work to convert wind energy to electrical power.
Final Presentation
This presentation summarizes the results of a CFD simulation of a vertical axis wind turbine. It describes the turbine geometry, computational domain and mesh used. The simulation used a 2D section of a 3-bladed VAWT with a rotating region and stationary region separated by a sliding interface. Grid independence was assessed using four meshes. Results showed turbine torque changing with mesh refinement but similar values for the finer meshes. Turbine torque also did not change with time step refinement. Validation showed the CFD captured torque variation with less than 9% error. Tangential force results indicated different forces in upwind and downwind portions. Mean torque was greatly reduced from peak torque values. Velocity and vorticity contours showed the turbine wake
Wind turbine project presentation
This document summarizes the design and analysis of a vertical axis wind turbine for use on highways in India. It includes the following key points:
1) The motivation was to design a wind turbine that could harness wind energy from passing vehicles to power streetlights along highways, improving nighttime visibility and safety.
2) An initial design was created based on Lenz's vertical axis wind turbine design. It was then modeled, simulated using ANSYS, and a prototype was built for testing.
3) Testing of the prototype found it was able to produce up to 4.5W of power from wind, achieving an efficiency of 25%. Analysis showed with optimized production, efficiencies over 28% could be achieved to
Vertical axis wind mill turbine
This presentation discusses vertical axis wind turbines (VAWT). It begins with an introduction to wind power and defines VAWTs. Key points made include that VAWTs can accept wind from any direction, have generators mounted at ground level for easy maintenance, and are well suited to urban environments. The presentation covers the basic design and operation of VAWTs, including their advantages of lower wind speeds needed and omnidirectional wind capture, compared to horizontal axis turbines. Applications and future developments are also discussed, such as creating self-starting VAWTs and reducing power fluctuations.
Design and Fabrication of Darrieus wind turbine
The document describes the design and fabrication of a Darrieus wind turbine. It discusses the turbine's components like blades, rotor, and support structure. The blades are designed based on NACA airfoil profiles for lift generation. A CAD model and diagrams of the turbine setup are presented. The working principle involves rotation of the wind mill blades by wind, which turns the dynamo to generate electricity and charge a battery. Static structural analysis was performed on the rotor using SolidWorks. The fabrication process involves cutting, bending, welding operations to make the blades, rotor and support from steel sheets and plates. Advantages include using renewable energy while disadvantages include intermittent power supply based on wind availability.
AES CAPABILITIES Brochure
American Event Services provides rental and sales of customized temperature control equipment for temporary and permanent use. They have a wide range of air conditioners, chillers, air handlers, cooling towers, and heaters available from 1 to 500 tons. They also offer power distribution panels, automatic transfer switches, and transformers to provide electrical power. Their equipment is designed to be rugged and durable while also easy to use for the rental industry with features like quick connections and stackable frames.
2000REOZM_8_12b (1)
This document provides specifications for a 2000REOZM generator set model. It includes details on:
- Standard features like one-source responsibility, prototype testing, EPA emissions compliance, and warranty options
- Electrical specifications of the alternator and generator
- Engine details including the model, fuel system, cooling system, and emissions compliance
- Operation requirements around air flow, fuel consumption, and environmental conditions
- Controller features and available accessories
1600REOZM_8_12b
This document provides specifications for a 1600REOZM generator set including:
- Ratings for standby and prime power output between 1380-1630 kW
- It is a 4-cycle, turbocharged diesel generator set with a 60Hz or 50Hz output
- Standard features include a one-year warranty, EPA emissions compliance, and digital voltage regulation
More Related Content
What's hot
Renewable Energy Applications & Innovations
The companies of Altra Industrial Motion offer many critical drivetrain products utilized in renewable energy applications including brakes, power packs, geared motors, couplings, shaft locking devices and linear actuators.
Turbine blade faliure
The document discusses a compressor blade failure analysis. It notes that the blade failed due to fatigue originating from machining marks at the blade hub-stem junction on the leading edge side. Nickel-based blades are now commonly used instead of earlier cobalt-based blades, as nickel-based blades can withstand higher temperatures and have a longer lifespan, though cobalt blades previously had an even longer lifespan. The analysis procedure described examines blade microstructure and composition at different sections to determine the failure cause.
vertical axis wind turbine
This presentation summarizes the generation of direct current (DC) using a vertical axis wind turbine (VAWT). It includes a block diagram of the VAWT system, measurements of wind speed and velocity, descriptions of the project components including the permanent magnet generator, blades, and a graph of the results. The team designed and tested a VAWT that converts kinetic wind energy to mechanical power using a generator, then to DC power which is stored or used to power loads.
AW3000
ACCIONA Windpower has seen explosive growth of orders for its AW3000 platform. This success is due to a track record of reliability and product innovation coming from one of the most experienced wind energy companies in the world. The latest evolution is the AW132/3000 for low-wind sites, which delivers the lowest cost of energy in this segment. Partner with ACCIONA Windpower to make your projects rise above the competition.
Is Your Industrial Combustion Equipment Reliable?
Crane Composites realized their air heaters for 5 ovens were out of standards and unreliable. They hired Stelter & Brinck to upgrade the heaters. Stelter & Brinck custom designed upgrades for each oven zone. The upgrades decreased shutdowns and downtime by over 70% for Crane Composites, reduced maintenance expenses, and helped meet EPA standards.
Blauboxeen
Ventilation units for efficient supply ventilation in various premises.
Controllable air supply, heating and filtration.
Compatible with Ø100 up to 315 mm round air ducts.
Tooling Technology - Quick Change Locks
With Tooling Technology’s Quick Change systems, we have made the lean principle of “Quick Changeover” fast and simple. Designed to locate and lock with a high level of accuracy and repeatability. Perfect for Robotics, Automation, Manufacturing, Defense, and more.
Power generation using neodymium magnets in Vertical Axis Wind Turbine
The objectives of our Experimental Setup are as follows:
Design calculations of rotor axle, bearings and stator coil
CAD design of various components of VAWT, like Hub, Axle, Blade Supports and Spoke Flange
Analysis of Hub in NX-NASTRAN 9.0
Fabrication of individual components of the setup
Assembly of VAWT
Testing of Experimental Setup
Results
guaglobal.com
The document describes the features of the VertiGO vertical axis wind turbine system. Some key features include a low start up wind speed of 0.5m/s, resistance to high storm winds up to 160km/h, compatibility with both on-grid and off-grid installations, ability to generate power in low wind speeds, and international patent protection. It provides detailed technical specifications and performance comparisons for various VertiGO turbine models ranging from 5KW to 50KW.
Acclerometer Part 14
An accelerometer is a device that measures proper acceleration ("g-force"). Proper acceleration is not the same as coordinate acceleration (rate of change of velocity). For example, an accelerometer at rest on the surface of the Earth will measure an acceleration g= 9.81 m/s2 straight upwards. By contrast, accelerometers in free fall orbiting and accelerating due to the gravity of Earth will measure zero.
Accelerometers have multiple applications in industry and science. Highly sensitive accelerometers are components of inertial navigation systems for aircraft and missiles.
DESIGN OPTIMIZATION OF WIND TURBINE BLADE
The objective of this project is to design a wind turbine that is optimized for the constraints that come with residential use. The main tasks of this project are:
> To study the design process and methodology of wind turbine
> Derive the Blade Element Momentum (BEM) theory then use it to conduct a parametric study that will determine if the optimized values of blade pitch and chord length create the most efficient blade geometry
> Analyse different air-foils to determine which one creates the most efficient wind turbine blade.
Computational flow optimization of Wind turbine blades
This project aims to analyze the aerodynamics of a horizontal axis wind turbine using computational fluid dynamics (CFD) software. The analysis compares the performance of blades with different airfoil profiles including NACA-9417, MH-102, and SC 02-0714 at various angles of attack. Additional analyses are conducted with a blade featuring a winglet add-on and with a three-blade rotor assembly. Results show improvements in lift, drag, and lift-to-drag ratio from the winglet. Visualizations of pressure, velocity, and turbulence are also presented.
CARNOT ENGINE Priyanka kushwah
The document discusses Sadi Carnot's ideal Carnot engine from 1824. The Carnot engine is a theoretical, reversible engine that operates between a hot reservoir at temperature T1 and a cold reservoir at temperature T2. It provides the maximum possible efficiency for converting heat into work, with its efficiency depending only on the temperatures of the reservoirs. The main components of the Carnot engine are an infinite heat source, an infinite heat sink, a perfect insulating plate, and a frictionless piston-cylinder assembly containing the working gas.
Which generator is best for use in the home
Utility power supply in India is erratic and unpredictable. Power failures range from 2 to 4 hours in cities and 8 hours or more in small towns and villages.
Wind Farms
The document discusses various conventional and non-conventional energy sources. It describes coal, oil, natural gas, oil shale, tar sands and nuclear power as conventional sources. It then discusses wind turbines and wind farms as non-conventional sources, explaining their components and how they work to convert wind energy to electrical power.
Final Presentation
This presentation summarizes the results of a CFD simulation of a vertical axis wind turbine. It describes the turbine geometry, computational domain and mesh used. The simulation used a 2D section of a 3-bladed VAWT with a rotating region and stationary region separated by a sliding interface. Grid independence was assessed using four meshes. Results showed turbine torque changing with mesh refinement but similar values for the finer meshes. Turbine torque also did not change with time step refinement. Validation showed the CFD captured torque variation with less than 9% error. Tangential force results indicated different forces in upwind and downwind portions. Mean torque was greatly reduced from peak torque values. Velocity and vorticity contours showed the turbine wake
Wind turbine project presentation
This document summarizes the design and analysis of a vertical axis wind turbine for use on highways in India. It includes the following key points:
1) The motivation was to design a wind turbine that could harness wind energy from passing vehicles to power streetlights along highways, improving nighttime visibility and safety.
2) An initial design was created based on Lenz's vertical axis wind turbine design. It was then modeled, simulated using ANSYS, and a prototype was built for testing.
3) Testing of the prototype found it was able to produce up to 4.5W of power from wind, achieving an efficiency of 25%. Analysis showed with optimized production, efficiencies over 28% could be achieved to
Vertical axis wind mill turbine
This presentation discusses vertical axis wind turbines (VAWT). It begins with an introduction to wind power and defines VAWTs. Key points made include that VAWTs can accept wind from any direction, have generators mounted at ground level for easy maintenance, and are well suited to urban environments. The presentation covers the basic design and operation of VAWTs, including their advantages of lower wind speeds needed and omnidirectional wind capture, compared to horizontal axis turbines. Applications and future developments are also discussed, such as creating self-starting VAWTs and reducing power fluctuations.
Design and Fabrication of Darrieus wind turbine
The document describes the design and fabrication of a Darrieus wind turbine. It discusses the turbine's components like blades, rotor, and support structure. The blades are designed based on NACA airfoil profiles for lift generation. A CAD model and diagrams of the turbine setup are presented. The working principle involves rotation of the wind mill blades by wind, which turns the dynamo to generate electricity and charge a battery. Static structural analysis was performed on the rotor using SolidWorks. The fabrication process involves cutting, bending, welding operations to make the blades, rotor and support from steel sheets and plates. Advantages include using renewable energy while disadvantages include intermittent power supply based on wind availability.
AES CAPABILITIES Brochure
American Event Services provides rental and sales of customized temperature control equipment for temporary and permanent use. They have a wide range of air conditioners, chillers, air handlers, cooling towers, and heaters available from 1 to 500 tons. They also offer power distribution panels, automatic transfer switches, and transformers to provide electrical power. Their equipment is designed to be rugged and durable while also easy to use for the rental industry with features like quick connections and stackable frames.
What's hot (20)
Power generation using neodymium magnets in Vertical Axis Wind Turbine
Power generation using neodymium magnets in Vertical Axis Wind Turbine
Computational flow optimization of Wind turbine blades
Computational flow optimization of Wind turbine blades
Similar to Starter generator-sg500 from ePropelled
2000REOZM_8_12b (1)
This document provides specifications for a 2000REOZM generator set model. It includes details on:
- Standard features like one-source responsibility, prototype testing, EPA emissions compliance, and warranty options
- Electrical specifications of the alternator and generator
- Engine details including the model, fuel system, cooling system, and emissions compliance
- Operation requirements around air flow, fuel consumption, and environmental conditions
- Controller features and available accessories
1600REOZM_8_12b
This document provides specifications for a 1600REOZM generator set including:
- Ratings for standby and prime power output between 1380-1630 kW
- It is a 4-cycle, turbocharged diesel generator set with a 60Hz or 50Hz output
- Standard features include a one-year warranty, EPA emissions compliance, and digital voltage regulation
1800REOZM_8_12b
This document provides specifications for a 1800REOZM diesel generator set. It includes:
- Ratings for the standby and prime power outputs between 1580-1596kW and 1440-1452kW respectively
- Standard features like a one-year warranty, brushless generator, and electronic governor
- Technical details on the generator, engine, cooling system, fuel system, lubrication system, electrical system, and dimensions
- Optional accessories available for the generator set like exhaust silencers, battery chargers, and paralleling systems
Qnergy Remote Power Generators
Qnergy offers an effective, economical solution uniquely designed to meet the challenges of rural or remote electrification. The thermal powered generators are capable of generating electricity utilizing virtually any combustible fuel such as natural gas, propane, and biogas. All Qnergy generators feature the patented QB Series Stirling Engine, which delivers robust, high-efficiency performance with very low noise and zero maintenance. Being fuel agnostic and insensitive to gas content, the Qnergy Remote Power System can run on gas with variable caloric content.
1250REOZM_8_12b
This document provides specifications for a 1250REOZM model diesel generator set. Key details include:
- The set has a 1250-1280 kW standby and 1155-1165 kW prime rating at 60 Hz.
- It is powered by a 12 cylinder S12R-Y1PTA-2 diesel engine.
- Standard features include an isochronous governor for precise frequency regulation and a PMG for excellent load response.
- The document lists detailed technical specifications and dimensions for the generator, engine, cooling and fuel systems.
- Optional accessories that can be added are also outlined.
Catalogo Air Cooled Scroll Chiller LG.pdf
This document provides information on LG's air cooled inverter scroll chiller solution, including specifications, features, selection guidelines, and installation instructions. Key features highlighted include high performance compressors, advanced control algorithms, integrated safety protections, and linkage controls for peripheral equipment. Selection of the product involves checking usage conditions, selecting a candidate model based on required capacity, and adjusting performance estimates based on factors like altitude and antifreeze usage. The chillers are designed for high efficiency and reliability with corrosion resistant heat exchangers, low noise compressors, and factory performance testing.
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
The document summarizes the key features and specifications of the MT250 Series Microturbine from Ingersoll Rand. It is a 250 kW continuous onsite electrical power generation system with integrated heat recovery. Some of its main components include a patented recuperator and combustor, as well as a synchronous generator. It can operate in grid-parallel or grid-isolated modes and meets stringent emissions regulations.
1500REOZM_8_12b
This document provides specifications for a 1500REOZM diesel generator set. It includes details on:
- Ratings for standby and prime power output in kW and kVA at 60Hz and 50Hz frequencies
- Alternator specifications including voltage, phase, and cooling rise ratings
- Engine specifications including model, type, displacement, ratings, and cooling/fuel systems
- Standard features such as one-source responsibility, prototype testing, transient performance compliance
- Optional accessories for the open unit, cooling, fuel, electrical, and control systems
GenDesign
This document provides information on designing generators and their performance. It discusses:
1) The key parameters considered in generator design including voltage, power rating, cooling type, and magnetic properties. Electromagnetic and thermal calculations are done to optimize efficiency.
2) Generator performance curves show operating limits for things like overload, temperature, and voltage/frequency variations. These are used to set protection relay thresholds.
3) Generators are classified by their drive type (gas turbine, steam turbine), speed (high, medium), and cooling method (air, hydrogen, water). Design and construction vary accordingly.
AC Motor cooling system Analysis Based on Application Case Study
AC Motor cooling system Analysis Based on Application Case StudyInternational Journal of Engineering Inventions www.ijeijournal.com
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.MGP720-MGP1500, THREE PHASE, 720-1650KVA
This document summarizes the features and specifications of generators produced by MG Power in the UK. Key details include:
- The generators use Perkins diesel engines and Stamford alternators, are built to ISO standards in an ISO-certified UK facility, and include remote monitoring and safety features as standard.
- Models range from 720kVA to 1500kVA and can be customized with additional options.
- Generators are designed for reliability with corrosion-resistant materials and guarding of moving parts. Support and service is available through a dealer network.
- Dimensions, weights and fuel consumption vary by model but all are designed for easy transport and installation. Comprehensive technical specifications are provided for engines
Air compressor in saudi arabia
Air compressor in Saudi Arabia the lifeline for the manufacturing industry. Kirloskar’s Air Compressor Systems offers a wide range of compressors in 15 product categories. To bring focused attention and create a Centre of Competence specific to technology, these are subdivided into three categories: Reciprocating Compressors, Screw Compressors, and Centrifugal Compressors. KPCL offers Air Compressors from 30 to 10,000 CFM.
KPCL Reciprocating, Horizontal Balanced Opposed and Piston Compressors are the results of extensive engineering expertise and experience of over five decades in design, manufacturing, supply, and installation of air and gas compressors of various designs, capacities, and pressures for a range of applications.
Our compressor range is known for its minimum power consumption, lower operating temperature, and maximum efficiency, thus achieving overall effectiveness. The compressors are manufactured adhering to stringent quality standards and in keeping with different industrial standards as per customer requirements.
Reciprocating Air Compressor Division offers products for a wide range of market segments such as general engineering to critical operation & processing applications in key sectors like Railways and process industries like Refineries & Petrochemical Industries, PET bottling applications etc For more information, please https://3t-saudi.com
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
30 kVA Prime/ 33 kVA Standby Generating Set. Powered by FPT / IVECO Engine and Linz Alternator. Engine Model: 80313AM1P.S550.
Avp694 6 compressed
This document provides specifications for an AVP694-6 generator set manufactured by AKSA Power Generation. It includes:
- Technical details on the Volvo engine, Stamford alternator, and DSE control panel components of the generator set.
- Dimensions and weights for the unit in both an enclosed and open skid configuration.
- Performance details like fuel consumption rates, sound levels, and voltage regulation capabilities.
- Standard features like the base fuel tank, battery charger, and residential grade silencer.
- Optional accessories available for custom configurations.
Perkins 10KVA Engine Model 403A-11G1
10KVA GENSET Powered by PERKINS Diesel Engine Model 403A-11G1, 03 Cylinders, 1500 RPM & LINZ ALTERNATOR, 50HZ, 3 Phase, 400 Volts, Equipped with DEEPSEA Control Panel.
Brochure gas turbine sgt 300 for power generation
The SGT-300 is a single-shaft industrial gas turbine from Siemens that produces 7.90 MW of power. It offers high efficiency of 31% and can run on various gaseous and liquid fuels. The compact and reliable design makes it suitable for industrial cogeneration applications producing over 18 tonnes of steam per hour and overall plant efficiencies over 80%. Key features include high efficiencies, low emissions, and on-site maintainability. It is used in power generation, cogeneration, and oil and gas applications.
Siemens Steam Turbines 45kW-12MW
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output. The turbines are designed for reliability and efficiency and can be used for power generation, mechanical drives, and other industrial processes. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
Pre-designed Steam Turbines_EN
Siemens offers a comprehensive range of pre-designed steam turbines up to 12 MW for a variety of industrial applications. Their product line includes 11 steam turbine models ranging from 10 kW to 12 MW in output that are suitable for applications such as power generation, mechanical drives, and combined heat and power plants. Siemens has over 100 years of experience in steam turbine technology with a fleet of over 20,000 installed turbines.
Điều hòa âm trần LG 36000BTU
This document provides information on LG's commercial air conditioner solutions, focusing on their smart inverter single central air conditioning (CAC) units. It highlights key benefits including energy savings of up to 22% compared to constant speed models, intelligent features like human detection and wireless control via LG ThinQ, and reliability elements such as corrosion resistance. A variety of indoor unit types are also presented, including 1 way and 4 way ceiling cassette units, ceiling concealed duct units, and floor standing units. Product lineups by capacity are shown, ranging from 9,000 to 60,000 BTU for single phase units and 30,000 to 100,000 BTU for 3 phase units.
Electrical Motor
The document discusses different types of electrical motors, including AC motors like induction motors and synchronous motors, and DC motors like shunt motors and series motors. It covers motor construction, cooling methods, load characteristics, starting methods, protection devices, and causes of motor failure. The key types of motors described are induction motors, synchronous motors, and DC motors. Methods of cooling discussed include TEFC, TETV, CACA and CACW. Bearing selection and motor protection are also summarized.
Similar to Starter generator-sg500 from ePropelled (20)
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
Ingersoll Rand MT250 Microturbine Product Spec 080LTb
AC Motor cooling system Analysis Based on Application Case Study
AC Motor cooling system Analysis Based on Application Case Study
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
Recently uploaded
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Recently uploaded (20)
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Starter generator-sg500 from ePropelled
- 1. ePropelled The Future of Electric Propulsion Starter Generator - SG500 UAV manufacturers face a complex set of trade-offs to meet the performance requirements for any given application. The permanent magnet brushless starter generator is a critical component for ensuring the electrical system can meet the design objectives of the UAV. ePropelled SG series are the most versatile starter generators in their category. The slim line design boasts a patent pending active air-cooling system that allows it to operate in temperatures in excess of 180°C in certain applications. Our unique patent pending adaptor allows bearing less mounting of the starter generator directly onto the engine. Low Weight The outer rotor boasts the lowest weight in its class with outstanding power density. • Bearingless option available with dedicated Spyder mounting jig • Directly driven on engine crankshaft with customizable shaft coupling ring • Optional customizable active air-cooling rotor hub • Optional K-type thermal sensor to measure winding temperature ePropelled offers a range of electrical system components, such as intelligent Power Systems (IPS), that are engineered to work with these starter generators. Fly Smarter Starter Generators
- 2. ePropelled The Future of Electric Propulsion SG500 Technical Specifications Technical Specifications MECHANICAL Parameter Measurement Diameter 3.98 in (101 mm) Length 1.13 in (28.6 mm) Weight with bearing (incl. high profile mounting bracket, winding leads and thermal sensor) 0.97 lb (440 g) Weight without bearing (incl. high profile mounting bracket, winding leads and thermal sensor) 0.91 lb (415 g) Stator Winding Temperature Sensor K-Type Thermocouple Winding Operating Temperature Up to 356°F (180°C) Rotor Operating Temperature Up to 356°F (180°C) Generator Type Brushless Permanent Magnet, Outer Rotor Winding Type 3-phase (hand wound, impregnated) No-Load, Line to Line Voltage Constant 7.4 Vac/1000 rpm KV Rating 100 (tested as a generator) Maximum Continuous Power 15% below peak power Peak Power Duration 3 minutes Mounting Type Direct on crankshaft via customizable coupling ring Assembled in USA SG500 Power Characteristics The starter generators require consistent (open) airflow of 2m/s, or larger, across the windings to maintain the maximum continuous current and power ratings stated during runtime. The figures in this document are provided as guidelines for normal conditions and device operation; environmental factors, such as air temperature and/or humidity, can vary the starter generators maximum performance limits. Ambient temperature during testing, 25°C Please ensure that the starter generator is used within an environment that does not exceed its safe operational temperature of 180°C for the windings, 180°C for the rotor and 120°C for the bearing in bearing version. Tests carried out at mean sea level (altitude 0ft) and 89% Humidity.
- 3. ePropelled info@ePropelled.com www.ePropelled.com All specifications subject to change without notice. For more information, including ordering product, please contact us at info@ePropelled.com. SG500-1 rev08192020 © 2020 by ePropelled