The document describes a connector device that allows for flexible arrangement on a vehicle body. It has multiple connectors connected by a flexible wiring board. Each connector has a lid that fixes the wiring board inside, making it rigid. However, the wiring board is flexible outside of the connectors, allowing the connectors to move freely according to the shape of the vehicle body. This provides efficient arrangement without needing flat space exclusively for the connector device.
The document describes an improved construction for frames for windows and doors. The frames are assembled using a key section that has longitudinal ribs with lateral projections that slide between ribs of fixed frame sections. This allows for rigid assembly of the fixed frames. Opening frames are assembled in a similar manner and are hinged to fixed frames to allow opening and closing. Surrounding sections are also described that allow the assembled frames to be fixed to wall anchors.
This document describes an improvement to closures for openings, particularly windows of the sash type. It details a closure using first and second panels that are slidably mounted in guides. The guides can pivotally move the panels into a closed position where the panels are flush. This provides a flat, uninterrupted surface when closed. When open, the panels can slide in their guides in a plane parallel to the other panel. The document then provides figures and descriptions of examples using this design for windows.
This document discusses keys to successful corporate blogging. It recommends having clear goals for your blog and creating valuable content that fulfills the needs of your readers to attract an engaged audience. It emphasizes regularly publishing high-quality content and participating in comments as important for driving search engine optimization and increasing awareness through inbound links. Measurement of goals like engagement and awareness is also recommended to determine your return on investment from blogging.
El documento presenta una serie de indicadores de logro y recursos para el desarrollo de habilidades en diferentes áreas como educación física, matemáticas y participación grupal. Los estudiantes utilizarán dispositivos como computadoras, celulares e Internet para completar actividades que involucran el reconocimiento del cuerpo, la práctica de deportes, juegos matemáticos y el trabajo en equipo.
Strategic HR: Fostering Employee Engagement via Enterprise 2.0 Technologies &...Allyis
Ethan Yarbrough discusses how organizations can foster employee engagement through enterprise technologies and strategic HR practices. He defines engagement as employees feeling involved and enthusiastic about their work. Highly engaged workforces outperform others by 20-28% and increase profits and operating margins. However, most employees are only "up for grabs" and not strongly committed. Barriers to engagement include information overload, lack of respect, distance between employees, and lack of trust in leadership. Yarbrough argues that technology tools can help by giving employees ways to share expertise, make themselves heard, find and connect with others, and be more successful. Strategic HR should focus on improving the employee experience and making the organization a better place to work through these engagement
The document describes an improved construction for frames for windows and doors. The frames are assembled using a key section that has longitudinal ribs with lateral projections that slide between ribs of fixed frame sections. This allows for rigid assembly of the fixed frames. Opening frames are assembled in a similar manner and are hinged to fixed frames to allow opening and closing. Surrounding sections are also described that allow the assembled frames to be fixed to wall anchors.
This document describes an improvement to closures for openings, particularly windows of the sash type. It details a closure using first and second panels that are slidably mounted in guides. The guides can pivotally move the panels into a closed position where the panels are flush. This provides a flat, uninterrupted surface when closed. When open, the panels can slide in their guides in a plane parallel to the other panel. The document then provides figures and descriptions of examples using this design for windows.
This document discusses keys to successful corporate blogging. It recommends having clear goals for your blog and creating valuable content that fulfills the needs of your readers to attract an engaged audience. It emphasizes regularly publishing high-quality content and participating in comments as important for driving search engine optimization and increasing awareness through inbound links. Measurement of goals like engagement and awareness is also recommended to determine your return on investment from blogging.
El documento presenta una serie de indicadores de logro y recursos para el desarrollo de habilidades en diferentes áreas como educación física, matemáticas y participación grupal. Los estudiantes utilizarán dispositivos como computadoras, celulares e Internet para completar actividades que involucran el reconocimiento del cuerpo, la práctica de deportes, juegos matemáticos y el trabajo en equipo.
Strategic HR: Fostering Employee Engagement via Enterprise 2.0 Technologies &...Allyis
Ethan Yarbrough discusses how organizations can foster employee engagement through enterprise technologies and strategic HR practices. He defines engagement as employees feeling involved and enthusiastic about their work. Highly engaged workforces outperform others by 20-28% and increase profits and operating margins. However, most employees are only "up for grabs" and not strongly committed. Barriers to engagement include information overload, lack of respect, distance between employees, and lack of trust in leadership. Yarbrough argues that technology tools can help by giving employees ways to share expertise, make themselves heard, find and connect with others, and be more successful. Strategic HR should focus on improving the employee experience and making the organization a better place to work through these engagement
CQ fluency's 5 tips to streamline the translation of Medicare Advantage plansAlan Vernon
This document provides 5 tips for streamlining the translation process for Medicare Advantage plans. The tips are to: 1) develop a glossary and style guide; 2) understand the best document formats; 3) understand version control and managing revisions; 4) plan for 508 compliance remediation; and 5) build a partnership with your translation provider. Following each tip are approaches to implement them, such as creating a glossary, using templates, grouping similar documents, and meeting with your translation partner. The overall message is that working closely with a translation partner can help make the process more efficient and cost-effective.
The document describes several embodiments of a spark-cutting apparatus that uses capacitors and circuitry to eliminate direct current flow from a power source to a spark gap. This prevents excessive electrode erosion. The apparatus uses two capacitors connected in series to block direct current flow. Alternate embodiments use an alternating current source to charge the capacitors and include additional components like inductors, transformers, and switches to control the timing and frequency of spark discharges.
The document describes a carrier wave generator that produces 12 carrier frequencies spaced 4 kHz apart between 60-108 kHz. It uses two basic wave sources of 8 kHz and 12 kHz, which are divided from a master oscillator of 72 kHz. Odd and even harmonics of the basic waves are generated and selected by filters to produce 10 of the carrier frequencies. The remaining 4 frequencies are produced by modulating two of the carrier waves. This arrangement allows the spacing between any two frequencies to be at least 8 kHz, reducing the stringency of the filter requirements.
El documento presenta a Consultae, una empresa que ofrece servicios de gestión de formación profesional continua para empresas. Entre sus servicios se incluyen la gestión de ayudas y subvenciones para la formación, consultoría de recursos humanos, auditorías, y software para la gestión de formación. La empresa tiene más de 15 años de experiencia en el sector y ha trabajado con grandes empresas españolas.
This document describes an electronic switching unit patent from 1957. The switching unit contains two tubes (which can be a single double-triode tube) that are controlled such that one tube is conductive while the other is non-conductive. Voltage dividers are used to regenerate the switching voltages without needing additional elements. The switching unit is suitable for use in code converters and binary computer systems to invert switching potentials with a small amplitude.
Leading Millenniums to Leadership GreatnessRoshan Thiran
This file contains the presentation slides on a session I conducted with PIKOM on "Leading Millennials" - it highlights what we need to do as leaders to grow our Millennials in our workforce to become great leaders. you can also go to www.leaderonomics.com for more articles and insights on leadership development
El documento presenta un cuadernillo de actividades sobre alimentación y nutrición para la Supervisión de Secundaria Técnica Núm. 3. El cuadernillo incluye lecturas, presentaciones y ejercicios sobre conceptos básicos de alimentación y nutrición como los nutrientes, las necesidades nutricionales y los principios de una dieta saludable. El objetivo es fortalecer la educación secundaria y mejorar los aprendizajes de los estudiantes a través de estrategias que promuevan la colaboración entre docentes.
VBM is a managerial process that links strategy, measurement, and operations to create shareholder value. It focuses on holistically managing the organization to create value for stakeholders as defined by management priorities. VBM uses analytical methods and technology in an integrated framework to deploy strategy, manage processes, and create value by focusing on activities, jobs, compensation, and organizational structure. While implementation faces behavioral, technical, organizational, and managerial challenges, adopting VBM performance measures relevant to each organization can help effectively create and increase firm value as demonstrated by many Fortune 100 companies.
The document summarizes perspectives from several CEOs and HR leaders on what it takes for HR to get a seat at the CEO's strategy table. Key ideas include: understanding the business deeply, contributing directly to business goals, running HR like a business by measuring outcomes and ROI, having a unique strategic opinion backed by data, and managing the "white space" to positively impact interconnected business processes. The CEO of Skinner Nurseries emphasizes that HR needs to offer more strategic ideas beyond job ads when critical business needs arise.
Intranet Best Practices - SharePoint Intelligence Conference 2011Allyis
This document outlines best practices for building an intranet on SharePoint 2010. It discusses defining the intranet's purpose, choosing a SharePoint edition, governance, taxonomy, information architecture, search, and user adoption. Planning in these areas is important to avoid issues like site sprawl, poor user experience, inability to provide service level agreements, and poor user adoption. The document was presented by Ethan Yarbrough and Jeremy Syme of Allyis at a SharePoint conference in 2011. Allyis is a technology consulting firm that helps clients implement SharePoint intranets and other solutions.
This patent describes a clip-on electrical connector. The connector is made from a single sheet of metal bent to form a body with flanges. One flange has projections that extend below the flange surface to scratch the contact surface and ensure electrical contact. The connector uses a mounting bolt and set screw to securely connect a conductor to the contact surface through the connector body. The simple construction reduces manufacturing costs compared to prior art connectors.
This document describes patent GB785273 for a holder for electronic devices like thermionic valves that have projecting terminal prongs. The holder has insulating material with contacts mounted on it. Each contact has a terminal portion extending beyond the body of the holder and formed with an attaching portion at the outer end. The attaching portion includes a resilient reverse-bend end portion adapted to be inserted into apertures in a supporting panel to electrically connect to circuits on the panel. The holder allows for easy assembly and connection of electronic devices to circuits printed on a supporting panel.
This document describes an electrical connection apparatus for connecting a thin conductive layer on a printed circuit board to external contacts. It involves a first member with an insulating material and thin conductive layer having an aperture, and a second member with a resilient conductive lug that passes through the aperture to contact the conductive layer. The lug is inserted in a direction along its major axis so that its minor axis passes through the aperture and temporarily deforms it, allowing the lug to contact both sides of the aperture near the ends of the minor axis. This provides an improved connection to thin conductive layers, useful for applications like printed circuits and switches.
This document describes an electrical connection apparatus for connecting a thin conductive layer on a printed circuit board to external contacts. It involves a first member with an insulating material and thin conductive layer having an aperture, and a second member with a resilient conductive lug that passes through the aperture to contact the conductive layer. The lug is inserted in a direction along its major axis so that its minor axis passes through the aperture and temporarily deforms it, allowing the lug to contact both sides of the aperture near the ends of the minor axis. This provides an improved connection to thin conductive layers, useful for applications like printed circuits and switches.
This document describes improvements to a standing wave indicator for measuring standing waves in rectangular waveguides. Key aspects include:
1) A section of waveguide is bent in a circular arc with one broad wall constructed to rotate, carrying a movable probe.
2) Springs press rolls against the rotating wall to maintain contact between the wall and bent waveguide section at different points.
3) The probe is adjustable for insertion depth and tunable via rods within channels in the rotating wall.
This document describes a patent for an improved electric plug and socket coupling device with a latching mechanism. Specifically, it details:
1) A pin projects from one unit (typically the socket unit) and has a shoulder that engages behind a resilient latching member on the other unit (typically the plug unit).
2) The leading end of the pin is pointed or tapered to deflect the latching member as the units engage, allowing it to snap into place behind the shoulder once fully engaged.
3) This latching mechanism securely locks the plug and socket units together while allowing easy release, and provides an audible "click" for verification of a proper connection.
CQ fluency's 5 tips to streamline the translation of Medicare Advantage plansAlan Vernon
This document provides 5 tips for streamlining the translation process for Medicare Advantage plans. The tips are to: 1) develop a glossary and style guide; 2) understand the best document formats; 3) understand version control and managing revisions; 4) plan for 508 compliance remediation; and 5) build a partnership with your translation provider. Following each tip are approaches to implement them, such as creating a glossary, using templates, grouping similar documents, and meeting with your translation partner. The overall message is that working closely with a translation partner can help make the process more efficient and cost-effective.
The document describes several embodiments of a spark-cutting apparatus that uses capacitors and circuitry to eliminate direct current flow from a power source to a spark gap. This prevents excessive electrode erosion. The apparatus uses two capacitors connected in series to block direct current flow. Alternate embodiments use an alternating current source to charge the capacitors and include additional components like inductors, transformers, and switches to control the timing and frequency of spark discharges.
The document describes a carrier wave generator that produces 12 carrier frequencies spaced 4 kHz apart between 60-108 kHz. It uses two basic wave sources of 8 kHz and 12 kHz, which are divided from a master oscillator of 72 kHz. Odd and even harmonics of the basic waves are generated and selected by filters to produce 10 of the carrier frequencies. The remaining 4 frequencies are produced by modulating two of the carrier waves. This arrangement allows the spacing between any two frequencies to be at least 8 kHz, reducing the stringency of the filter requirements.
El documento presenta a Consultae, una empresa que ofrece servicios de gestión de formación profesional continua para empresas. Entre sus servicios se incluyen la gestión de ayudas y subvenciones para la formación, consultoría de recursos humanos, auditorías, y software para la gestión de formación. La empresa tiene más de 15 años de experiencia en el sector y ha trabajado con grandes empresas españolas.
This document describes an electronic switching unit patent from 1957. The switching unit contains two tubes (which can be a single double-triode tube) that are controlled such that one tube is conductive while the other is non-conductive. Voltage dividers are used to regenerate the switching voltages without needing additional elements. The switching unit is suitable for use in code converters and binary computer systems to invert switching potentials with a small amplitude.
Leading Millenniums to Leadership GreatnessRoshan Thiran
This file contains the presentation slides on a session I conducted with PIKOM on "Leading Millennials" - it highlights what we need to do as leaders to grow our Millennials in our workforce to become great leaders. you can also go to www.leaderonomics.com for more articles and insights on leadership development
El documento presenta un cuadernillo de actividades sobre alimentación y nutrición para la Supervisión de Secundaria Técnica Núm. 3. El cuadernillo incluye lecturas, presentaciones y ejercicios sobre conceptos básicos de alimentación y nutrición como los nutrientes, las necesidades nutricionales y los principios de una dieta saludable. El objetivo es fortalecer la educación secundaria y mejorar los aprendizajes de los estudiantes a través de estrategias que promuevan la colaboración entre docentes.
VBM is a managerial process that links strategy, measurement, and operations to create shareholder value. It focuses on holistically managing the organization to create value for stakeholders as defined by management priorities. VBM uses analytical methods and technology in an integrated framework to deploy strategy, manage processes, and create value by focusing on activities, jobs, compensation, and organizational structure. While implementation faces behavioral, technical, organizational, and managerial challenges, adopting VBM performance measures relevant to each organization can help effectively create and increase firm value as demonstrated by many Fortune 100 companies.
The document summarizes perspectives from several CEOs and HR leaders on what it takes for HR to get a seat at the CEO's strategy table. Key ideas include: understanding the business deeply, contributing directly to business goals, running HR like a business by measuring outcomes and ROI, having a unique strategic opinion backed by data, and managing the "white space" to positively impact interconnected business processes. The CEO of Skinner Nurseries emphasizes that HR needs to offer more strategic ideas beyond job ads when critical business needs arise.
Intranet Best Practices - SharePoint Intelligence Conference 2011Allyis
This document outlines best practices for building an intranet on SharePoint 2010. It discusses defining the intranet's purpose, choosing a SharePoint edition, governance, taxonomy, information architecture, search, and user adoption. Planning in these areas is important to avoid issues like site sprawl, poor user experience, inability to provide service level agreements, and poor user adoption. The document was presented by Ethan Yarbrough and Jeremy Syme of Allyis at a SharePoint conference in 2011. Allyis is a technology consulting firm that helps clients implement SharePoint intranets and other solutions.
This patent describes a clip-on electrical connector. The connector is made from a single sheet of metal bent to form a body with flanges. One flange has projections that extend below the flange surface to scratch the contact surface and ensure electrical contact. The connector uses a mounting bolt and set screw to securely connect a conductor to the contact surface through the connector body. The simple construction reduces manufacturing costs compared to prior art connectors.
This document describes patent GB785273 for a holder for electronic devices like thermionic valves that have projecting terminal prongs. The holder has insulating material with contacts mounted on it. Each contact has a terminal portion extending beyond the body of the holder and formed with an attaching portion at the outer end. The attaching portion includes a resilient reverse-bend end portion adapted to be inserted into apertures in a supporting panel to electrically connect to circuits on the panel. The holder allows for easy assembly and connection of electronic devices to circuits printed on a supporting panel.
This document describes an electrical connection apparatus for connecting a thin conductive layer on a printed circuit board to external contacts. It involves a first member with an insulating material and thin conductive layer having an aperture, and a second member with a resilient conductive lug that passes through the aperture to contact the conductive layer. The lug is inserted in a direction along its major axis so that its minor axis passes through the aperture and temporarily deforms it, allowing the lug to contact both sides of the aperture near the ends of the minor axis. This provides an improved connection to thin conductive layers, useful for applications like printed circuits and switches.
This document describes an electrical connection apparatus for connecting a thin conductive layer on a printed circuit board to external contacts. It involves a first member with an insulating material and thin conductive layer having an aperture, and a second member with a resilient conductive lug that passes through the aperture to contact the conductive layer. The lug is inserted in a direction along its major axis so that its minor axis passes through the aperture and temporarily deforms it, allowing the lug to contact both sides of the aperture near the ends of the minor axis. This provides an improved connection to thin conductive layers, useful for applications like printed circuits and switches.
This document describes improvements to a standing wave indicator for measuring standing waves in rectangular waveguides. Key aspects include:
1) A section of waveguide is bent in a circular arc with one broad wall constructed to rotate, carrying a movable probe.
2) Springs press rolls against the rotating wall to maintain contact between the wall and bent waveguide section at different points.
3) The probe is adjustable for insertion depth and tunable via rods within channels in the rotating wall.
This document describes a patent for an improved electric plug and socket coupling device with a latching mechanism. Specifically, it details:
1) A pin projects from one unit (typically the socket unit) and has a shoulder that engages behind a resilient latching member on the other unit (typically the plug unit).
2) The leading end of the pin is pointed or tapered to deflect the latching member as the units engage, allowing it to snap into place behind the shoulder once fully engaged.
3) This latching mechanism securely locks the plug and socket units together while allowing easy release, and provides an audible "click" for verification of a proper connection.
This document describes a patent for an improved electric plug and socket coupling device with a latching mechanism. Specifically, it details:
1) A pin projects from one unit (typically the socket unit) and has a shoulder that engages behind a resilient latching member on the other unit (typically the plug unit).
2) The leading end of the pin is pointed or tapered to deflect the latching member as the units engage, allowing it to snap into place behind the shoulder once fully engaged.
3) This latching mechanism securely locks the plug and socket units together while allowing easy release, and provides an audible "click" for confirmation of connection.
This document describes a patent for an improved electric plug and socket coupling device with a latching mechanism. Specifically, it details:
1) A pin projecting from one unit (typically the socket unit) that has a shoulder to engage behind a resilient latching member on the opposing unit (typically the plug unit).
2) The latching member can be deflected to disengage from the shoulder pin for uncoupling.
3) The tapered leading end of the pin acts as a pilot to move the latching member aside during coupling, allowing it to snap into place behind the shoulder once fully engaged.
This document describes a patent application for improvements to a rotary electric switch. Specifically, it describes a switch housing with fixed contacts on inclined surfaces connected by steps, and a rotary contact member that can complete electrical circuits by engaging the fixed contacts. Narrow grooves between the fixed contacts help extinguish any arcs that form when the circuit is opened to improve the switch's electrical rating and lifespan. The housing design allows for easy assembly of all switch components.
This document summarizes a patent for an electrical heating panel assembly. It describes a frame that holds a panel made of two bonded sheets of insulating material with an electrical heating resistance in between. The panel is set back from the frame edges to allow air circulation behind the panel and between panels when multiple units are installed together. The heating resistance takes a sinuous path between the panel sheets for even heat distribution.
This document describes a high voltage tube socket with an improved means of mounting a corona ring. The tube socket has contact pin receptacles within recesses and solder lugs extending from one side. A corona ring is supported by a single leg portion mounted in a further recess. This allows the corona ring to be easily assembled to the socket with minimal operations to prevent arcing at high voltages.
This document describes floor cleaning and polishing equipment. It has a shaft that is pivotally attached to a base so it can be adjusted to different angles. To achieve an adjustable handle position, the shaft has a retractable rod with an end that can lodge in perforations on an arcuate strip below the shaft end. This immobilizes the shaft at the desired angle. The strip can have two holes to position the shaft upright or at a preset angle, or more holes for additional angles. The strip can also be located under the base for a compact design.
This document describes a patent for a new or improved vaned rotor for electric or electronic flow meters. Key points:
- The rotor is designed to be very small and lightweight while still providing accurate flow measurements for small pipes.
- It is mounted on the longitudinal axis of the pipe and has at least one transparent part extending through it.
- A light source and light sensor are positioned across the pipe to detect each time the transparent part passes, allowing the rotor's revolutions to be counted and the fluid flow rate computed.
- In the example design, the rotor body has a bore housing a transparent core that extends between two transparent ports in the pipe, allowing light to pass each half revolution for detection
This document describes a patent for an improved method of manufacturing brassieres. Key points:
- The brassiere is made of at least 3 layers: a soft nylon lining, a semi-rigid nylon crinoline sheet, and an exterior nylon covering.
- The layers are cut out together while heated, welding the edges and forming half cups. The cups are assembled and bordered with ribbon.
- Two cups are joined and encircled with thick nylon thread to add rigidity. The inside is bound to prevent pricking from crinoline threads.
- This provides a brassiere with a soft interior but rigid shaped exterior through an efficient manufacturing method.
1) The document describes a process for polymerizing olefins by bringing the olefin into contact with a reaction medium containing a transition metal halide that has been reacted with an organometallic compound.
2) The transition metal halides used are halides of Group IV to VI transition metals, and the organometallic compounds used include alkali metal alkyls, alkenyls, alkynyls, aryls, and aralkyls.
3) The polymerizations produce polymers with higher molecular weights suitable for films and fibers or lower molecular weights suitable as chemical intermediates.
The document describes a method of preserving food by sealing it in flexible, waterproof and heat-resistant bags that are evacuated of gases and sterilized through fractionated sterilization (Tyndallization) involving repeated heating and cooling cycles. Specifically, the food is enclosed in plastic or laminate bags, which are evacuated and heat-sterilized in boiling water or steam. The partially sterilized packages are then cooled and stored to allow any remaining spores to germinate before being resterilized, with typically two heating cycles being sufficient. This allows the food to be seen by buyers and takes advantage of fractionated sterilization in a practical way compared to traditional canned preservation methods.
This document describes improvements to electrically heated boilers, specifically:
1) An electrically heated boiler with an inverted T-section reinforced concrete beam that provides strength while remaining lightweight for handling. The beam supports flooring slabs and has a reinforcing structure of longitudinal and transverse metal members.
2) A submarine electric cable with an outer conductor protected by a fabric tape that is impregnated and coated on only one side. This allows for quick water penetration and stabilization of electrical characteristics.
3) Improvements to electrically heated boilers relating to heating elements made of electrically conductive material surrounded by insulation and mounted within a boiler shell.
This document describes British patent GB786204 (A) for an improved construction of a reinforced concrete beam. The beam has an inverted T-section with a horizontal bottom part of concrete containing longitudinal reinforcing members. A undulating reinforcing member connects the bottom and top members to provide a triangulated truss structure, imparting strength while maintaining lightness of weight. Edge portions of the bottom concrete part provide supporting ledges for flooring slabs.
This patent describes a dimpling die set used for forming indentations on workpieces. The die set comprises two dies mounted on a frame - a fixed first die and a movable second die positioned opposite the first die. At least one of the dies has indent-forming projections arranged at an angle corresponding to the angle of the workpiece surface, allowing indentations to be formed across the entire surface even if it is not perpendicular to the line of motion of the second die. The projections on at least one die form a dimpling surface of pyramid shapes extending toward the workpiece. A locating portion on one die positions it a set distance from the workpiece edge to consistently locate the indented area.
Сытник В. С. Основы расчета и анализа точности геодезических измерений в стро...Иван Иванов
В книге изложены вопросы теории и практики расчета, бценки
и анализа точности геодезических измерений, выполняемых при
возведении промышленных, жилых и общественных зданий й\цн-
женериых сооружений. На основе существующих в теории вероят^~—-
ностей
математической статистики и ошибок измерений рассмат
риваются методы расчета необходимой и достаточной точности гео
дезических измерений
применительно к определенным стадиям
строительно-монтажных работ и конструктивным решениям зданий
и сооружений. Значительное внимание уделено анализу точности
результатов геодезических измерений
Poialkova v.m. -_lifter-akademiia_(2007)Иван Иванов
The document is illegible as it contains random characters and symbols with no discernible words, sentences or meaning. It appears to be gibberish with no real information that can be summarized.
This document provides an introduction to a master's thesis that analyzes the legal and commercial issues in EU-Russia relations in the context of sanctions policy. It outlines the goals and structure of the thesis. The thesis will examine EU-Russia relations before and after sanctions were imposed in 2014 over Ukraine, the legal framework around the sanctions, and their impact on trade. It will also explore ways to optimize EU-Russia relations going forward. The introduction establishes that relations between the EU and Russia are an ongoing issue that significantly impacts international politics and economics.
Заковряшин А. И. Конструирование РЭА с учетом особенностей эксплуатацииИван Иванов
Показана роль конструкторского проектирования в обеспечении эффективности технического обслуживания РЭА по фактическому состоянию. В книге
взаимосвязанно решаются вопросы обеспечения ремонто- и контролепригодности
при конструировании РЭА. Ремонтопригодность рассматривается лак решающи”
фактор обеспечения эффективности применения аппаратуры. Область значений
конструктивных показателей РЭА определяется как результат решения задачи
оптимизации заданного качества функционирования.
The document provides guidance for directors of music in senior high schools on producing effective musical programs. It discusses various types of programs, considerations for program building such as attention, contrast and continuity. Organization, administration, publicity, programs/tickets, staging, lighting, costuming and other elements are covered. Experimental research was conducted, including visits to Radio City Music Hall and small theaters, to study professional practices.
1) Adolph W. Berkner of Cayuga, North Dakota invented an improved elevator bucket design.
2) Berkner's elevator bucket has a yieldingly supported bottom plate that can open under excessive weight to prevent overloading, and automatically closes when the weight reaches a predetermined amount to deliver accurate amounts.
3) The bottom plate is flexibly supported by a leather or metal strip attached to the top edge and backed by a metal strip, and is held closed by an arcuate leaf spring.
This document describes a radio navigation system that provides continuous indications of bearing and distance from a transmitter beacon to a receiver. It utilizes a single transmitter and receiver at the beacon location and a transmitter and receiver at the mobile location. The pulsed output of the distance measuring beacon is amplitude modulated with fundamental and harmonic bearing signals. At the mobile receiver, the distance is obtained from the timing of distance measuring pulses while the bearing is obtained by comparing the phase of the envelope wave components and reference signals.
This document describes a process for producing hydrocarbon drying oils through the polymerization of butadiene and styrene monomers in the presence of sodium catalyst. It discusses conducting the reaction in a reactor, then treating the product solution with an organic acid to convert the sodium into a filterable salt. The process aims to improve upon large-scale production by continuously feeding reagents to a reactor while removing the polymerized product, and pre-treating make-up materials to improve reaction efficiency.
This document describes improvements to a carbonating apparatus for producing aerated water. It details a conventional carbonator design and issues with maintaining proper carbonation levels and water temperature. The invention aims to address these issues by wrapping the carbonating chamber in helical coils of pipes, with one pipe carrying water and the other a refrigerant. This design cools the chamber directly to maintain carbonation levels while reducing operating pressures and refrigeration needs.
Methanex is the world's largest producer and supplier of methanol. We create value through our leadership in the global production, marketing and delivery of methanol to customers. View our latest Investor Presentation for more details.
World economy charts case study presented by a Big 4
World economy charts case study presented by a Big 4
World economy charts case
World economy charts case study presented by a Big 4
World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4
World economy charts case study presented by a Big 4
World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4World economy charts case study presented by a Big 4study presented by a Big 4
ZKsync airdrop of 3.6 billion ZK tokens is scheduled by ZKsync for next week.pdfSOFTTECHHUB
The world of blockchain and decentralized technologies is about to witness a groundbreaking event. ZKsync, the pioneering Ethereum Layer 2 network, has announced the highly anticipated airdrop of its native token, ZK. This move marks a significant milestone in the protocol's journey, empowering the community to take the reins and shape the future of this revolutionary ecosystem.
The E-Way Bill revolutionizes logistics by digitizing the documentation of goods transport, ensuring transparency, tax compliance, and streamlined processes. This mandatory, electronic system reduces delays, enhances accountability, and combats tax evasion, benefiting businesses and authorities alike. Embrace the E-Way Bill for efficient, reliable transportation operations.
MUTUAL FUNDS (ICICI Prudential Mutual Fund) BY JAMES RODRIGUESWilliamRodrigues148
Mutual funds are investment vehicles that pool money from multiple investors to purchase a diversified portfolio of stocks, bonds, or other securities. They are managed by professional portfolio managers or investment companies who make investment decisions on behalf of the fund's investors.
Cleades Robinson, a respected leader in Philadelphia's police force, is known for his diplomatic and tactful approach, fostering a strong community rapport.
1. move to contents.
J-PlatPat Reliable And Friendly Industrial Property SearchJapanese Top page Help
list Site map JPO INPIT INPIT National Center for Industrial Property
Information and Training
Help desk(9:00-21:00)
(+81)3-6666-8801
helpdesk@j-platpat.inpit.go.jp
Patent & Utility Model
Design
Trademark
Top page Patent & Utility Model FI/F-term Search
begin contents.
FI/F-term Search
Back
Help Search List Detail
You can retrieve a variety of patent and utility model gazettes by FI/F-term.
Selected Gazette
JP,10-247565,A
Previous Document 33/63 Next Document
PAJ
Detail
Image
CLAIMS
DETAILED DESCRIPTION
TECHNICAL FIELD
PRIOR ART
EFFECT OF THE INVENTION
TECHNICAL PROBLEM
MEANS
DESCRIPTION OF DRAWINGS
DRAWINGS
* NOTICES *
JPO and INPIT are not responsible for any
damages caused by the use of this translation.
1.This document has been translated by computer. So the translation may not
reflect the original precisely.
2.**** shows the word which can not be translated.
3.In the drawings, any words are not translated.
DETAILED DESCRIPTION
[Detailed Description of the Invention]
[0001]
[Field of the Invention]The present invention relates to the connector device
used for the electric connection box mounted on an automobile, other electric
wiring boxes, etc.
[0002]
[Description of the Prior Art]In order to distribute the electric power from a
battery to each component, such as a lamp, and to supply electric power, the
electric connection box is mounted on the automobile. The housing 1 in which
Fig.7 showed the exploded perspective view of the conventional electric
connection box, and multiple slits 2 for busbar insertion were formed, It has a
plurality of busbars 3 which are inserted in the slit 2 for busbar insertion,
and perform power allocation, and the connector 5 inserted in a plurality of
connector areas 4 provided by the housing 1, respectively. In a connector, a
plurality of terminal (not shown) which contacts the terminal area 3a of the
busbar 3, and is connected is stored.
Two or more wire harness 6 connected to this terminal is pulled out from the
connector 5.
7 is an upper cover attached so that the upper part of the housing 1 may be
covered in order to prevent water, dust, etc. from adhering to the busbar 3.
This electric connection box performs power allocation by being fixed to the
vehicle body of an automobile via a bracket, a screw, etc.
[0003]
2. [Problem to be solved by the invention]Such an electric connection box has a
fixed fixing point to the housing 1 of the connector 5, and since the whole is
attached to a vehicle body where this fixed relation is maintained, the space of
the shape of flatness for exclusive use is needed for the vehicle body. The
electronic units for aiming at substantial safety and fullness of equipment
increase in number, and the space for installing these is needed for the vehicle
body. From such a thing, it is difficult to secure the flat space only for an
electric connection box, and a certain correspondence is needed.
[0004]The present invention is made in consideration of such a conventional
problem.
The purpose is to be able to perform attachment to a curved surface part and a
corner portion of a vehicle body used as a dead space, and for this to provide a
connector device in which efficient arrangement to a vehicle body is possible,
without needing flat space for exclusive use, even if it is a connector device
used for an electric connection box etc.
[0005]
[Means for solving problem]In order to achieve the above-mentioned object,
invention of Claim 1 is provided with the following.
A plurality of connectors by which an insertion wall which a terminal inserts in
was provided inside.
A flexible wiring board which is connected with a terminal after a connection
part of an end of a terminal has penetrated, and connects said plurality of
connectors.
A lid which is provided by each aforementioned connector and fixes the
circumference of a flexible wiring board on both sides of a flexible wiring
board between connectors.
[0006]In this structure, since a flexible flexible wiring board will be in
turgescence inside a connector when put between a lid and a connector, it can be
in a kind of hard state inside a connector. Since the flexible wiring board of
this turgescence is penetrated and the terminal has inserted in the insertion
wall of a connector, within a connector, it is supported satisfactorily and
functions as the usual connector similarly.
[0007]On the other hand, the flexible wiring board has flexibility as it is in
the outside of a connector, and the connector connected by the flexible wiring
board can follow in footsteps of bend of a flexible wiring board, and can be
moved freely. For this reason, a connector can be arranged in accordance with
the curved surface part and corner portion of a vehicle body, restrictions of
connector arrangement are lost, and the flexibility of arrangement is expanded.
[0008]Invention of Claim 2 is the invention according to claim 1, and the
plurality of the aforementioned flexible wiring board is arranged in the
vertical direction, The pattern of a partner flexible wiring board and the
pattern connected are formed in each flexible wiring board, and this pattern is
connected by the terminal inserted between flexible wiring boards.
[0009]Since a flexible wiring board is between the upper and lower sides and
conducts, when the flexible wiring board arranged up and down is connected by
the terminal inserted between them, A three-dimensional circuit can be cabled
and a complicated circuit can be formed easily, and the density within an
identical area increases and it can perform efficient cabling.
[0010]A plurality of connectors which invention of Claim 3 is the invention
according to claim 1 or 22, and were connected by the aforementioned flexible
wiring board are arranged in an electric connection box.
[0011]Since free movement is possible for the connector connected by the
flexible wiring board, even if it is an electric connection box by adopting this
connector as an electric connection box, the arrangement of it doubled with the
curved surface part and corner portion of the vehicle body is attained.
[0012]
[Mode for carrying out the invention]Fig.1 - Fig.5 are provided with the
following.
One embodiment of the present invention is shown, Fig.1 is a perspective view of
the essential part, and they are a plurality of connectors 8.
A plurality of terminals 9.
The flexible wiring board 10 which connects a plurality of connectors 8.
3. [0013]The connector 8 is molded into the approximately rectangular shape with
which the upper surface was opened wide, and the upper surface opened wide
serves as the loading slot 11 where the partner terminal from a mating connector
etc. is inserted. This connector 8 is provided with the sidewall portion 12 of
the 4th page, and the insertion wall 13 which forms the lower parts of the
sidewall portion 12 successively as shown in Fig.2, and the slit (not shown)
which the terminal 9 inserts in in the shape of penetration is formed in the
insertion wall 13. The sidewall portion 12 serves as rugged form, and can
support the terminal 9 which inserted in the insertion wall 13 by this.
[0014]As shown in Fig.3, the lid 15 is attached to the sidewall portion 12 of 1
in each connector 8 via the hinge region 13. The lid 15 is provided with the
bottom wall part 16 and the vertical-wall part 17 of the 4th page which rises
from the bottom wall part 16, and the sidewall portion 12 of the 4th page to
which the vertical-wall part 17 is extended in the direction of a lid from the
insertion wall 13 is abutted by rotating the lid 15 in the connector 8
direction, respectively. On the occasion of this abutment, by the sidewall
portion 12 and the vertical-wall part 17, the circumference of the flexible
wiring board 10 is put and the flexible wiring board 10 is held by turgescence
within the connector 8.
[0015]The lock part 18 is formed in the end of an opposite side with the hinge
region 14 in the lid 15, and this lock part 18 engages with it with the lock
receiving part 19 formed in the end to which the connector 8 opposed. Thereby,
the lid 15 is reliably locked to the connector 8.
[0016]The terminal 9 is provided with the following.
As shown in Fig.1, it is the connection part 20 of the lower part side.
The contact portion 21 formed successively by the upper part of the connection
part 20 in the shape of 2 **.
The connection part 20 penetrates the slit 22 (refer to Fig.5) formed in the
flexible wiring board 10, and is connected with the flexible wiring board 10 by
soldering. On the other hand, along with the sidewall portion 11 of the
connector 8, the contact portion 21 contacts a stretch and the partner terminal
inserted into the connector 8 from the loading slot 11, and conducts.
[0017]The flexible wiring board 10 has flexibility, as shown in Fig.5, multiple
patterns 23 are formed in the whole surface side, and the slit 22 of each
pattern 23 which the connection part 20 of the terminal 9 penetrates suitably is
formed in the position. This flexible wiring board 10 has become long, and as
shown in Fig.2, it connects a plurality of connectors 8 in accordance with that
length direction. Attachment of the connector 8 to the flexible wiring board 10
is performed the sidewall portion 12 of the connector 8, and by reaching and
putting the flexible wiring board 10 by the vertical-wall part 17 of the lid 15.
[0018]Next, the assembly procedure of this embodiment is described. First,
insert the terminal 9 in each connector 8, the insertion wall 13 of the
connector 8 is made to penetrate the connection part 20, and it supports. At
this time, the contact portion 21 of each terminal 9 is supported by unevenness
of the sidewall portion 12 of the connector 8. And the slit 22 of the flexible
wiring board 1 is made to penetrate the connection part 20 of the terminal 9
which penetrated the slit of the insertion wall 13, and the penetration end and
pattern 23 are connected by soldering.
[0019]Rotate the lid 15 after this soldering, the sidewall portion 12 of the
connector 8 is made to abut that vertical-wall part 17, engagement of the lock
part 18 and the lock receiving part 19 is carried out, and the lid 15 is fixed.
By this fixing, the circumference of the flexible wiring board 10 is put by the
vertical-wall part 17 of the lid 15, and the sidewall portion 12 of the
connector 8. The flexible wiring board 10 between which the circumference was
put will be in the turgescence pulled within the connector 8, and will be in the
state where the terminal 9 was supported firmly. Therefore, since the terminal 9
is supported by the insertion to the insertion wall 13 and it is supported by
the flexible wiring board 10 used as turgescence, it can contact the partner
terminal and fitness which were inserted into the connector 8.
[0020]In this structure, connector 8 lateral part of the flexible wiring board
10 has flexibility as it is, and the connector 8 connected by the flexible
wiring board 10 can follow in footsteps of bend of the flexible wiring board 10,
4. and can be moved freely. For this reason, the connector 8 can be arranged in
accordance with the curved surface part and corner portion of a vehicle body,
restrictions of arrangement are lost, and the flexibility of connector
arrangement is expanded.
[0021]By inserting the above structure in the connection box body (not shown) of
an electric connection box, restrictions of arrangement of an electric
connection box can be lost, an electric connection box can be arranged to the
crooked part of a vehicle body, and a corner portion, and an electric connection
box can be arranged easily.
[0022]Fig.6 shows another flexible wiring board 24. This flexible wiring board
24 is arranged at the lower layer of the flexible wiring board 10 shown in
Fig.5, and the pattern 25 of the direction orthogonal to the pattern 23 of the
flexible wiring board 10 is mainly formed. The slit 26 which the terminal 9
penetrates is formed in the pattern 25.
[0023]When arranging the flexible wiring boards 10 and 24 up and down, insert
the terminal 9 among these, make the slit of one of flexible wiring boards
penetrate one end of the terminal 9, solder, and. A slit is made to penetrate to
the flexible wiring board of another side, and the end of another side is
soldered to it. Using the connector 8 provided with the lid 15, at this time,
each flexible wiring board 10 and 24 is put between a both-ends portion by the
connector 8 and the lid 15.
[0024]Connector 8 inside of the flexible wiring boards 10 and 24 will be in
turgescence by this, and it can support the terminal 9 satisfactorily. On the
connector 8 outside, since the flexible wiring boards 10 and 24 have
flexibility, it can be bent freely and the flexibility of arrangement of a
connector is expanded. Thus, by arranging the two or more flexible wiring boards
10 and 24 up and down, three-dimensional cabling of a circuit can be performed
and a complicated circuit can be formed.
[0025]
[Effect of the Invention]According to invention of Claim 1, as described above,
when put between a lid and a connector, a flexible wiring board will be in
turgescence inside a connector, and it can support a terminal. The flexible
wiring board has flexibility as it is in the outside of a connector, and the
connector connected by the flexible wiring board can follow in footsteps of bend
of a flexible wiring board, and can be moved freely. For this reason, a
connector can be arranged in accordance with the curved surface part and corner
portion of a vehicle body, restrictions of connector arrangement are lost, and
the flexibility of arrangement is expanded.
[0026]Since according to invention of Claim 2 the flexible wiring board arranged
up and down conducts when connected by the terminal inserted between them, a
three-dimensional circuit can be cabled and can form a complicated circuit
easily, and. The density within an identical area increases and it can perform
efficient cabling.
[0027]According to invention of Claim 3, even if it is an electric connection
box by adopting a connector as an electric connection box since free movement is
possible when a plurality of connectors are connected by the flexible wiring
board, the arrangement doubled with the curved surface part and corner portion
of the vehicle body is attained.
Representative drawing
Representative drawing
Next
Representative drawing 1 2 3 4 5 6 7
Previous Document 33/63 Next Document
To return to the top of this page
Notice on Usage Privacy Policy Questionnaire
[Translation done.]