see the powerpoint presentation

1. Software Presentation
Sterling Denims Ltd
A software program to Simplifie the documents and texte for
all employée .

2. 1. Introduction about software.
2. About SDL Software
3. Software Development Process
4. Technical Specification
5. Availability
6. Training
7. Running Status and Update
8. Acknowledgement
Contents

3. Software is a set of instructions, data or programs used to
operate computers and execute specific tasks. Opposite
of hardware, which describes the physical aspects of a computer,
software is a generic term used to refer to applications,
scripts and programs that run on a device. Software can be
thought of as the variable part of a computer and hardware the
invariable part.
What is Software ?

4. 1. “Astor Software”.
2. “Fabric Store Software”.
3. “SDL Hourly Data tracking Software”.
Our Software

5. 1. “Astor Software”.
2. “Fabric Store Software”.
3. “SDL Hourly Data tracking Software”.
Our Software

6. 1. We are using this software Fabric Roll and Width wise
easily segregate and reduce fabric waste.
2. Increase marker efficiency.
3. Improve cutting and fabric store working system.
4. Automatic Lay sheet making according fabric width and
Shrinkage wise.
5. Auto Communication Build up Fabric Store, Cutting,
Fabric Inspection and CAD Section.
Astor Software

7. 1. Daily Fabric Receive According Fabric Software it
should be Accountable all Responsible Person (Store &
Top Management Persons).
2. Daily/Hourly Issue fabric to Cutting or Others using QR
Code Scanning System.
3. Auto Update Issue Quantity and Current Stock.
Fabric Store Software

8. 1. Daily In-house
2. Monthly In-House
3. Daily Fabric Relaxed
4. Monthly Fabric Relaxed
5. Daily Fabric Issue
6. Monthly Fabric Issue
Fabric Store Software

9. 7. Daily Fabric Return from Cutting
8. Monthly Fabric Return from Cutting
9. Daily Fabric Return from Cutting
10. Daily Fabric Shrinkage
11. Monthly Fabric Shrinkage
12. Fabric Store Current Stock
Fabric Store Software

10. Running Working Status
S.No Module Running Status Remarks
1 Daily In-house Active
2 Monthly In-House Active
3 Daily Fabric Relaxed Under Process
4 Monthly Fabric Relaxed Under Process
5 Daily Fabric Issue Active
6 Monthly Fabric Issue Active
7 Daily Fabric Return to Cutting Active
8 Monthly Fabric Return to Cutting Active
9 Daily Fabric Return from Cutting Active
10 Daily Fabric Shrinkage Under Process
11 Monthly Fabric Shrinkage Under Process
12 Fabric Store Current Stock Active

11. 1. During any Fabric Receive from Supplier We Create
Small Sticker by Software (Sticker Inside Fabric Details
Information).
2. During Head cutting we mention QR Code number
writing in Fabric Roll.
3. After Finish the Head Cutting we stock in Fabric
palette.
4. According Cutting Plan We Issue to Cutting by QR
Code Scanning System.
Working Principle

12. 5. All data Synchronizing and update automatic.
6. Any one Any where Tracking this Software.
7. Many User can Use same time.
8. Data Save Secure, No Data Loss.
Working Principle

13. 1. Order Entry
2. Production Planning
3. Cutting Production
4. Cutting WIP
5. Trims Store
6. Input Issue Status
7. Sewing Output
8. Sewing WIP
SDL Hourly Data Progress Software

14. 9. IE Department
10. QA Department
11.Maintenance Department
12.RQS Department
13.NQC Department
14. HR Department
15. Wash Send
16. Wash Received
SDL Hourly Data Progress Software

15. 17. Wash WIP
18. Finishing Input
19. Finishing Output
20. Finishing WIP
21. Shipment Quantity
22. Shipment Short/Excess
SDL Hourly Data Progress Software

16. Order Entry:
1. Order entry is the first step for this software.
2. This entry all department can be use easily, no need to
second time.
3. Its have export option PDF, excel format and use
customize.
4. All Department use this data.
5. If any mistake, it can be identify/correction easily.
Working Principle

17. Order Entry:
1. Order entry is the first step for this software.
2. This entry all department can be use easily, no need to
second time.
3. Its have export option PDF, excel format and use
customize.
4. All Department use this data.
5. If any mistake, it can be identify/correction easily.
Working Principle

18. Production Planning:
1. Monthly Production planning update
2. Weekly/Monthly Change over
Working Principle

19. Cutting Production:
1. According cutting production/bundle sheet, we are
doing cutting bundle ticket including QR Code.
2. Its have all Information According Cutting Bundling
ticket.
Working Principle

20. Cutting WIP:
1. Cutting WIP= Cutting Production Qty Minus Input Issue
Qty
Working Principle

21. Trims Store:
1. All accessories stock in store according inventory
system in software.
2. All data update in software Received, Issue and current
stock.
3. Before input issue from cutting all accessories check
then continue input issue to sewing line.
Working Principle

22. Input Issue Status:
1. During Input issue to sewing all bundle ticket scanning
and daily tracking input quantity timely.
2. Any kind of mistake solve easily.
Working Principle

23. Sewing Output:
1. Line wise sewing output quantity easily understand.
2. Any kind of sewing mistake easily identify and can be
solved this problem.
3. No need many types of label attaching (Shade label,
Line label, Pattern label, Country label).
4. We use update label with QR code (its one label attach
with many types of information including)
5. 1 Operator save per line.
Working Principle

24. Sewing WIP:
1. Sewing WIP= Sewing Input-Sewing Output
Working Principle

25. IE Department:
1. Efficiency Calculation (Cutting, Sewing, Finishing).
2. Production Data Bank (Operator Wise Production with
Efficiency Status).
3. Efficiency wise operator identify and need to initiative
(Low efficiency operator need training or motivation,
High efficiency operator
Working Principle

26. QA Department:
1. Line wise defect calculation Average, Floor wise
summery, Line wise monthly summery, Floor wise
monthly summery.
2. Can be research about this report.
Working Principle

27. Maintenance Department:
1. Maintenance store current stock status.
2. Loss time report line wise, floor wise, monthly, weekly.
Working Principle

28. RQS Department:
1. Inline audit report showing to all for reduce defect.
2. Initial check report status entry in software.
3. It can be research daily weekly monthly.
Working Principle

29. NQC Department:
1. Pre-Final/Final Inspection Report.
2. Its can be showing all and research daily, weekly,
monthly.
Working Principle

30. HR Department:
1. Daily attendance report update and connect with
efficiency report.
2. It can be research department wise manpower quantity,
man machine ratio, monthly turnover.
Working Principle

31. Wash Send:
1. During wash send any garments we scanning
garments QR code and auto counting with details.
2. As per our requirement we send any garments details
can be showing in this option.
Working Principle

32. Wash Receive:
1. During wash received garments we scanning all
garments.
2. If any missing garments we can find out the shortage
garments with details.
Working Principle

33. Wash WIP:
1. Wash WIP=Wash send-Wash receive
Working Principle

34. Finishing Input:
1. During finishing input we scanning all garments for
production.
2. Country wise shipment priority basis input maintain
according order quantity.
Working Principle

35. Finishing Output:
1. Finishing Input and out put difference can be showing
garments missing quantity.
2. Shipment small order quantity closing can be easily.
Working Principle

36. Finishing WIP:
1. Finishing WIP=Finishing input-Finishing output.
Working Principle

37. Shipment:
1. Shipment quantity daily, monthly, weekly, summery.
2. As per order quantity it can easily understand up-coming
shipment quantity at a glance.
3. Comparison Shipment short/excess summery.
Working Principle

38. Working Progress
S.No Module Running Status Remarks
1 Order Processing Running
2 Production Planning Under Process
3 Cutting Production Running
4 Cutting WIP Running
5 Trims Store Running
6 Input Issue Status Running
7 Sewing Output Under Process
8 Sewing WIP Running
9 IE Department Under Process
10 QA Department Under Process
11 Maintenance Department Under Process

39. Working Progress
S.No Module Running Status Remarks
12 RQS Department Under Process
13 NQC Department Under Process
14 HR Department Under Process
15 Wash Send Under Process
16 Wash Received Under Process
17 Wash WIP Under Process
18 Finishing Input Under Process
19 Finishing Output Under Process
20 Finishing WIP Under Process
21 Shipment Quantity Under Process
22 Shipment Short/Excess Under Process

40. Thanks All