SMOOTHED PLA TEST 3
•
0 likes•331 views
The document discusses confidential test results for Smoothed PLA Test 3. It contains repeated warnings about unauthorized copying of confidential documents and is copyrighted by Keytech S.r.l. in 2016.
Report
Share
Report
Share
Recommended
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
Recommended
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
More Related Content
What's hot
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
What's hot (7)
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Viewers also liked
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
Viewers also liked (14)
fff dashboard truck printed with pla layer filament
fff dashboard truck printed with pla layer filament
First printing and post processing test with m200 and new clear filament
First printing and post processing test with m200 and new clear filament
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Recently uploaded
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsRecently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
SMOOTHED PLA TEST 3
- 1. Confidential documents, unauthorized copying SMOOTHED PLA TEST 3 Copyright Keytech S.r.l. 09/08/16
- 2. Confidential documents, unauthorized copying SMOOTHED PLA TEST 3 Copyright Keytech S.r.l. 09/08/16
- 3. Confidential documents, unauthorized copying SMOOTHED PLA TEST 3 Copyright Keytech S.r.l. 09/08/16
- 4. Confidential documents, unauthorized copying SMOOTHED PLA TEST 3 Copyright Keytech S.r.l. 09/08/16
- 5. Confidential documents, unauthorized copying SMOOTHED PLA TEST 3 Copyright Keytech S.r.l. 09/08/16