PBT FILAMENT ON ZORTRAX M200
•
1 like•290 views
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
Report
Share
Report
Share
Download to read offline
Recommended
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
SMOOTHED PLA TEST 3
The document discusses confidential test results for Smoothed PLA Test 3. It contains repeated warnings about unauthorized copying of confidential documents and is copyrighted by Keytech S.r.l. in 2016.
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
Recommended
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
SMOOTHED PLA TEST 3
The document discusses confidential test results for Smoothed PLA Test 3. It contains repeated warnings about unauthorized copying of confidential documents and is copyrighted by Keytech S.r.l. in 2016.
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
More Related Content
What's hot
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
What's hot (9)
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Viewers also liked
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
Viewers also liked (12)
fff dashboard truck printed with pla layer filament
fff dashboard truck printed with pla layer filament
First printing and post processing test with m200 and new clear filament
First printing and post processing test with m200 and new clear filament
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Recently uploaded
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Recently uploaded (20)
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
PBT FILAMENT ON ZORTRAX M200
- 1. Copyright Keytech S.r.l. 04/09/16 Confidential documents, unauthorized copying PBT FILAMENT ON ZORTRAX M200
- 2. Copyright Keytech S.r.l. 04/09/16 Confidential documents, unauthorized copying PBT FILAMENT ON ZORTRAX M200
- 3. Copyright Keytech S.r.l. 04/09/16 Confidential documents, unauthorized copying PBT FILAMENT ON ZORTRAX M200