First printing and post processing test with m200 and new clear filament
•
0 likes•253 views
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
Report
Share
Report
Share
Recommended
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
Stick&filament (fili in stecche) listino prezzi pubblico
This document lists the prices of various 3D printing filaments and accessories. PLA filament is priced at €35-80 per spool depending on the type, with ABS, DSF, Smooth, PMMA and other filaments ranging between €45-55 per spool. Larger spools of materials like PLA Monster and PPGF35 are more expensive. Solvents and liquids for post-processing range from €15-25 per bottle. Packaging and shipping costs are specified, with payment required in advance and prices subject to change without notice.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
Recommended
DSF 3D FILAMENT PRINTED ON ZORTRAX M200
This document discusses confidential 3D printing filament tested on a Zortrax M200 printer. It contains a warning about unauthorized copying of confidential documents and copyright information for Keytech S.r.l. dated July 29, 2016 regarding DSF 3D filament printed on a Zortrax M200 printer.
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
Zortrax M200 Extruder with graphite insert
The document describes a new version of a nozzle for a Zortrax M200 3D printer that substitutes the standard PTFE pipe with a graphite insert pipe. The standard version uses a PTFE pipe while the new version uses a graphite pipe for the nozzle on the Zortrax M200 3D printer. The document is confidential and copyrighted by Keytech S.r.l.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
Stick&filament (fili in stecche) listino prezzi pubblico
This document lists the prices of various 3D printing filaments and accessories. PLA filament is priced at €35-80 per spool depending on the type, with ABS, DSF, Smooth, PMMA and other filaments ranging between €45-55 per spool. Larger spools of materials like PLA Monster and PPGF35 are more expensive. Solvents and liquids for post-processing range from €15-25 per bottle. Packaging and shipping costs are specified, with payment required in advance and prices subject to change without notice.
fff dashboard truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Dashboard truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
SMOOTHED PLA TEST 3
The document discusses confidential test results for Smoothed PLA Test 3. It contains repeated warnings about unauthorized copying of confidential documents and is copyrighted by Keytech S.r.l. in 2016.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
Z510 3D PRINTER
This document provides instructions for routine operation and maintenance of a Z510 3D printer, including preparing the build area by spreading powder, cleaning the service station, checking fluid levels, and changing print heads. It outlines 14 steps for changing a print head, from determining which head needs replacement to confirming proper alignment after installation and purging. The routine operation section also covers 11 steps for preparing the build area with powder at the start of each print.
More Related Content
Viewers also liked
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
PLA RENEGADE POLYAMIDE SINTERING EFFECT
The document discusses confidential testing done by Keytech S.r.l. on July 29, 2016 regarding the sintering effect of polyamide when using PLA Renegade material in 3D printing. Unauthorized copying of the confidential document is not permitted.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
SMOOTHED PLA TEST 3
The document discusses confidential test results for Smoothed PLA Test 3. It contains repeated warnings about unauthorized copying of confidential documents and is copyrighted by Keytech S.r.l. in 2016.
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
Real Personalized Orthotic 3 d printed
This document discusses 3D printed orthotics and appears to be confidential information from Keytech S.r.l. dated March 9, 2016 that should not be copied without authorization. It focuses on creating personalized orthotics using 3D printing technology.
fff bumper truck printed with pla layer filament
PLA LAYER Filament
IN MODEL MAKING SECTOR
Bumper truck
Scale 1:14
PRINTING PARAMETERS:
FFF PRINTER
0,3 mm NOZZLE
0,1 MM LAYER PRINTING
PLA LAYER FILAMENT
MEDIUM SPEED
210°C PRINTING TEMPERATURES
UrbanClean Test 3
This document discusses an UrbanClean Test 3 by Keytech S.r.l. from March 4, 2016. It contains confidential information and unauthorized copying of the documents is not permitted. The document compares conditions "BEFORE" and "AFTER" but provides no other details.
PLA LAYER
This document provides a comparison of the key properties of ABS Polylac and different types of PLA filaments, including tensile strength, flexural strength, impact resistance, heat deflection temperature, and elongation at break. The confidential document contains proprietary data from Keytech S.r.l. and was obtained from their website on October 31, 2014.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
BOX LAB 3D PRINTER
The Box Lab 3D printer is a new 3D printer product from Keytech S.r.l. that was copyrighted on March 26, 2016. The document contains confidential information about the 3D printer and unauthorized copying of the document is prohibited.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
SMOOTH FILL ALU 3D PRINT ING FILAMENT
This document discusses Smooth Fill Alu 3D printing filament. It mentions that the filament can be printed and smoothed, providing a smooth finish for 3D printed parts. Confidentiality and unauthorized copying are noted.
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Ghraphite insert will be installed on metling zone.
Z510 3D PRINTER
This document provides instructions for routine operation and maintenance of a Z510 3D printer, including preparing the build area by spreading powder, cleaning the service station, checking fluid levels, and changing print heads. It outlines 14 steps for changing a print head, from determining which head needs replacement to confirming proper alignment after installation and purging. The routine operation section also covers 11 steps for preparing the build area with powder at the start of each print.
Viewers also liked (20)
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
Wanhao d6 ptfe nozzle pipe substitute with half graphite insert
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Recently uploaded
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Recently uploaded (20)
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
First printing and post processing test with m200 and new clear filament
- 1. Confidential documents, unauthorized copyingCopyright Keytech S.r.l. 02/09/16 First printing and post processing test with M200 and new clear filament