1. CALOR SYN
LIQTRO CALOR SYN is a fully balanced heat transfer fluid which has been developed specifically to deliver heat
in indirect closed fluid heat transfer system at bulk temperature up to 320 C. It is blended from synthetic base
oil and a comprehensive additive package to provide the oxidation stability.
SPECIAL FEATURES :
Thermal stability, give excellent resistance to thermal cracking and chemical oxidation
High flash point, make them safe to be used at high temperature
High specific heat and thermal conductivity at all temperatures in normal systems, therefore will give
rapid heating and flexibility in systems
Typical Characteristics
Property Unit: Method LIQTRO CALOR SYN
Appearance (Room Temp.) - Visual Bright & Clear
Density at 15°C kg/l ASTM D 4052 0.8324
Flash Point (COC) 0
C ASTM D 92 220
Viscosity at 40°C cSt ASTM D 445 19.57
Viscosity at 100°C cSt ASTM D 445 4.26
Viscosity Index ASTM 2270 125
Pour Point °C ASTM D 97 -22.5
Total Acid Number °C ASTM D 974 0.01
Handling and Storage
Handling temperature maximum 60 0C. However, it is strongly recommended that for long term storage the
temperature should not exceed 50 0C.
Hazard Identification
Health Hazards, no significant effect expected
Environmental Hazards, This product does not contain any hazardous ingredient
Physical and Chemical Hazards/Fire and Explosion Hazards, Low hazards. Material can form flammable
mixtures or can burn only upon heating to 210 0C
For further information please contact :
PT.Smessindo Lubritech
Perkantoran Menara Era, 10th floor Room 03.
Jl.Raya Senen Kav. 135-137 Jakarta 10410 - Indonesia
Phone : (62-21) 386-2426
Fax. : (62-21) 386-3448