The document provides an overview of Huawei's EasyRET antenna solution as an improvement over traditional RET antenna solutions. Some key points:
- The EasyRET solution integrates components like the RCU and SBT into the antenna itself, reducing connections and simplifying installation.
- It allows electrical tilt devices to be identified and configured remotely without on-site work.
- The solution improves reliability by protecting components from the environment and reducing points of failure.
This document provides installation instructions for the AP-7131 Series Access Point. It describes unpacking the access point and checking contents, guidelines for access point placement and antenna installation. It also outlines hardware installation including mounting options, connecting power, and port functions. Basic access point configuration steps are explained to complete installation. Specifications and additional resources are also referenced.
This document provides installation instructions for the AP-7131 Series Access Point. It describes unpacking the access point and checking contents, guidelines for access point placement and antenna installation. It also outlines hardware installation including mounting options, connecting power, and port functions. Basic access point configuration steps are explained to complete installation. Specifications and additional resources are also referenced.
This document is the user guide for the TL-WA601G 108Mbps Wireless Access Point. It includes instructions for hardware installation, software configuration, and specifications for the device. The guide covers connecting the access point, configuring network settings, wireless settings like security and MAC filtering, and system tools for firmware, password changes, and more. It aims to easily guide users through setup and management of the wireless access point, whether familiar with networking devices or not.
Motorola solutions ap6521 access point installation guide (part no. 72 e 1554...Advantec Distribution
The document provides installation instructions for the AP-6521 Series Access Point, which includes:
- Guidelines for mounting the access point on a wall, under a suspended ceiling, or above a ceiling.
- Details on the package contents, features, and specifications of the access point.
- Information on defining a basic configuration for the access point using an initial setup wizard.
IRJET - Design and Implementation of RF based Wireless Home Automation SystemIRJET Journal
This document describes the design and implementation of a wireless home automation system using RF technology. The system allows users to remotely control home appliances such as lights and electrical outlets. It consists of an RF transmitter connected to a microcontroller that sends ON/OFF signals to an RF receiver. The receiver is connected to relays that control the loads. The system uses HT-12E and HT-12D ICs to encode and decode signals transmitted between the RF modules. The design aims to provide a low-cost and easy to use solution for remote home automation through wireless RF signals.
The document is the installation and user guide for the DN100 Outdoor Wireless Intelligent Access Point. It provides instructions on planning, installing, and configuring the DN100 for use as a wireless access point or wireless backhaul link. The guide covers topics such as radio frequency planning, antenna installation, Ethernet cabling, power supply, and initial configuration of the device's network settings and security. It also includes the DN100 specifications, limited warranty information, and contact details for technical support.
This document is the user manual for the KE8220 Virtual VNC Console. It contains information about FCC regulations and RoHS compliance for the device. The manual provides details on the package contents, hardware setup instructions, and component descriptions to help users install and operate the KE8220 console.
This document provides installation instructions for the Motorola AP 7181 Access Point. It describes hardware installation including mounting the access point, connecting power and antennas. Precautions for safe installation are outlined. Grounding requirements and guidelines for deploying the network are also covered, including recommended order for installing different node types. The document concludes with initial configuration steps and regulatory compliance information.
This document provides installation instructions for the AP-7131 Series Access Point. It describes unpacking the access point and checking contents, guidelines for access point placement and antenna installation. It also outlines hardware installation including mounting options, connecting power, and port functions. Basic access point configuration steps are explained to complete installation. Specifications and additional resources are also referenced.
This document provides installation instructions for the AP-7131 Series Access Point. It describes unpacking the access point and checking contents, guidelines for access point placement and antenna installation. It also outlines hardware installation including mounting options, connecting power, and port functions. Basic access point configuration steps are explained to complete installation. Specifications and additional resources are also referenced.
This document is the user guide for the TL-WA601G 108Mbps Wireless Access Point. It includes instructions for hardware installation, software configuration, and specifications for the device. The guide covers connecting the access point, configuring network settings, wireless settings like security and MAC filtering, and system tools for firmware, password changes, and more. It aims to easily guide users through setup and management of the wireless access point, whether familiar with networking devices or not.
Motorola solutions ap6521 access point installation guide (part no. 72 e 1554...Advantec Distribution
The document provides installation instructions for the AP-6521 Series Access Point, which includes:
- Guidelines for mounting the access point on a wall, under a suspended ceiling, or above a ceiling.
- Details on the package contents, features, and specifications of the access point.
- Information on defining a basic configuration for the access point using an initial setup wizard.
IRJET - Design and Implementation of RF based Wireless Home Automation SystemIRJET Journal
This document describes the design and implementation of a wireless home automation system using RF technology. The system allows users to remotely control home appliances such as lights and electrical outlets. It consists of an RF transmitter connected to a microcontroller that sends ON/OFF signals to an RF receiver. The receiver is connected to relays that control the loads. The system uses HT-12E and HT-12D ICs to encode and decode signals transmitted between the RF modules. The design aims to provide a low-cost and easy to use solution for remote home automation through wireless RF signals.
The document is the installation and user guide for the DN100 Outdoor Wireless Intelligent Access Point. It provides instructions on planning, installing, and configuring the DN100 for use as a wireless access point or wireless backhaul link. The guide covers topics such as radio frequency planning, antenna installation, Ethernet cabling, power supply, and initial configuration of the device's network settings and security. It also includes the DN100 specifications, limited warranty information, and contact details for technical support.
This document is the user manual for the KE8220 Virtual VNC Console. It contains information about FCC regulations and RoHS compliance for the device. The manual provides details on the package contents, hardware setup instructions, and component descriptions to help users install and operate the KE8220 console.
This document provides installation instructions for the Motorola AP 7181 Access Point. It describes hardware installation including mounting the access point, connecting power and antennas. Precautions for safe installation are outlined. Grounding requirements and guidelines for deploying the network are also covered, including recommended order for installing different node types. The document concludes with initial configuration steps and regulatory compliance information.
Chi tiết kỹ thuật máy pos BEETLE / Fusion.
Nhà phân phối: Công ty TNHH Tầm Nhìn Toàn Cầu (Global Vision Co., Ltd.)
Địa chỉ : 456/57 Cao Thắng Nối Dài, Phường 12, Quận 10, Tp.Hồ Chí Minh
Tel : (84-8) 3868 0103 / (84-8) 3868 0104
Fax : (84-8) 3868 0105
Email:sales@globalvision.com.vn
Hotline: +84 916 590 468
URL: www.globalvision.com (Global Vision Co., Ltd.)
www.wincor.com.vn (Wincor-Nixdorf Việt Nam)
This document provides product documentation for the TL-WN781ND 150Mbps Wireless Lite N PCI Express Adapter, including:
- An overview of the adapter's features and specifications
- Instructions for hardware and software installation on Windows XP, Vista, and 7
- Descriptions of the adapter's LED status indicators
- A guide to configuring the adapter using the TP-LINK Wireless Client Utility, including displaying connection status, managing profiles, and running diagnostics
- Instructions for quick setup security (QSS) configuration using push button or PIN methods
- Specification details and a glossary of terms are provided in the appendices
This document provides information about the TD-W8960N Wireless N ADSL2+ Modem Router, including:
- Copyright and trademark information
- Specifications for FCC compliance and RF radiation exposure
- CE marking warnings
- National restrictions on wireless frequencies
- Declaration of conformity
- Contents of the product package
The document contains information required for legal compliance as well as technical specifications and standards for the router hardware.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the Motorola AP-621 Series Access Point. It includes information on site preparation, package contents, features of the access point, and hardware installation instructions for wall mounting, suspended ceiling mounting, and above-ceiling mounting. Detailed specifications for electrical, physical, and radio characteristics are also provided, as well as regulatory information and support contact details.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also discusses antenna options, using a power injector for PoE, and LED indicators. Proper placement of the access point is emphasized to maximize coverage while avoiding interference.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also discusses antenna options, using a power injector for PoE, and LED indicators. Proper placement of the access point is emphasized to maximize coverage while avoiding interference.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also details the package contents, features of the access point like LED indicators, and specifications. Basic configuration and regulatory information is also included.
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3GMazhar Ali
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
This document provides product documentation for the TL-WR740N 150Mbps Wireless N Router, including:
- Specifications and features of the router.
- Instructions on connecting the router, including system requirements and installation environment guidelines.
- A quick installation guide for getting started with the router's basic configuration.
- An overview of the router's web-based management interface for accessing advanced configuration settings. Sections include network settings, wireless settings, DHCP settings, and port forwarding/virtual server functions.
- Compliance certifications and declarations for operating the router in accordance with radio frequency emission regulations.
The document provides instructions for installing and configuring the IEEE 802.11a/n Wireless Outdoor CPE. It covers preparing for installation, connecting the hardware, mounting the CPE on a pole, and configuring the device for either AP mode or CPE mode. The installation requires connecting an Ethernet cable and power adapter, attaching optional external antennas, and accessing the web interface using the default IP and credentials. Configuration involves setting wireless parameters and security settings depending on whether the CPE is used as an access point or client.
The document discusses choosing the correct antennas for smart space applications. It provides an overview of TE Connectivity's broad portfolio of antenna products and their global support capabilities. It introduces the speaker, Cody Friszell, an antenna product manager at TE with nearly 10 years of experience. The rest of the document discusses TE's antenna strategy, product breadth, considerations for choosing the right antenna for an application, and different internal and external antenna integration types.
Motorola solutions ap622 access point installation guide (part no. 72 e 15780...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-0622 access point. It describes how to wall mount or ceiling mount both the integrated antenna and external antenna models. The external antenna model package contents and mounting options are also outlined. The document provides specifications for the access point and regulatory information.
The document is a user manual for the GreyRapid N Wireless Network Router. It provides an introduction to the router and its features, which include allowing multiple computers and network devices to share a single internet connection via Ethernet ports or wireless connectivity. It also lists the contents of the manual, which covers topics like system setup, configuration of wired and wireless networks, advanced functions such as quality of service, security, and troubleshooting. The manual is intended to guide users through installing and using the router to set up a home or small office network.
The document is an installation guide for the AP6522 Access Point. It provides instructions on hardware installation including wall mounting and suspended ceiling mounting for integrated antenna and external antenna models. It also lists package contents, specifications, warnings and regulatory information. The guide is intended for qualified network installers to properly setup and configure the access point.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series access point. It describes the package contents, features of the access point, and guidelines for hardware installation including wall mounting, suspended ceiling mounting, and above-ceiling mounting. Precautions and considerations for optimal access point placement are also covered. Specifications for electrical, physical, and radio characteristics are listed.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-621 Series Access Point. It describes the package contents, features of the access point, and guidelines for hardware installation including wall mounting, mounting under a suspended ceiling, and above-ceiling installation. Detailed instructions are provided for each installation method. Power options including a Power Injector that combines data and power over a single Ethernet cable are also discussed.
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
The document provides instructions for cabling a Nokia Flexi EDGE base station, including connecting internal bus cables, power cables, RF cables, antenna jumper cables, transmission cables, and optional alarm cables. Safety precautions are outlined such as avoiding excessive cable bending and ensuring all connector seals are in place. Port locations and cable routing are also described.
IRJET - Visible Light Communication for Video TransmissionIRJET Journal
This document discusses using visible light communication (VLC) to transmit video signals wirelessly using light-emitting diodes (LEDs). It proposes a system using an LED to transmit video data that is received by a photodiode and processed into a video signal. The system was tested by transmitting a 30-second, 111.98KB video file between a transmitter and receiver 1 meter apart in under 2 minutes. VLC using LEDs for transmission provides advantages over Wi-Fi like higher bandwidth and more secure communication.
The document provides a product description for Huawei's 3900 Series Base Station, including:
- An overview of the base station's architecture, which uses BBUs, RFUs, and RRUs as basic modules.
- Descriptions of typical configurations for indoor macro base stations using BTS3900/BTS3900(Ver. C) cabinets, including single-mode and dual-mode configurations.
- Details on the internal structures of BTS3900 and BTS3900(Ver. C) cabinets supporting different power inputs.
Chi tiết kỹ thuật máy pos BEETLE / Fusion.
Nhà phân phối: Công ty TNHH Tầm Nhìn Toàn Cầu (Global Vision Co., Ltd.)
Địa chỉ : 456/57 Cao Thắng Nối Dài, Phường 12, Quận 10, Tp.Hồ Chí Minh
Tel : (84-8) 3868 0103 / (84-8) 3868 0104
Fax : (84-8) 3868 0105
Email:sales@globalvision.com.vn
Hotline: +84 916 590 468
URL: www.globalvision.com (Global Vision Co., Ltd.)
www.wincor.com.vn (Wincor-Nixdorf Việt Nam)
This document provides product documentation for the TL-WN781ND 150Mbps Wireless Lite N PCI Express Adapter, including:
- An overview of the adapter's features and specifications
- Instructions for hardware and software installation on Windows XP, Vista, and 7
- Descriptions of the adapter's LED status indicators
- A guide to configuring the adapter using the TP-LINK Wireless Client Utility, including displaying connection status, managing profiles, and running diagnostics
- Instructions for quick setup security (QSS) configuration using push button or PIN methods
- Specification details and a glossary of terms are provided in the appendices
This document provides information about the TD-W8960N Wireless N ADSL2+ Modem Router, including:
- Copyright and trademark information
- Specifications for FCC compliance and RF radiation exposure
- CE marking warnings
- National restrictions on wireless frequencies
- Declaration of conformity
- Contents of the product package
The document contains information required for legal compliance as well as technical specifications and standards for the router hardware.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the Motorola AP-621 Series Access Point. It includes information on site preparation, package contents, features of the access point, and hardware installation instructions for wall mounting, suspended ceiling mounting, and above-ceiling mounting. Detailed specifications for electrical, physical, and radio characteristics are also provided, as well as regulatory information and support contact details.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also discusses antenna options, using a power injector for PoE, and LED indicators. Proper placement of the access point is emphasized to maximize coverage while avoiding interference.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also discusses antenna options, using a power injector for PoE, and LED indicators. Proper placement of the access point is emphasized to maximize coverage while avoiding interference.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series Access Point. It describes how to wall mount, ceiling mount, or mount above the ceiling the access point. It also details the package contents, features of the access point like LED indicators, and specifications. Basic configuration and regulatory information is also included.
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3GMazhar Ali
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
This document provides product documentation for the TL-WR740N 150Mbps Wireless N Router, including:
- Specifications and features of the router.
- Instructions on connecting the router, including system requirements and installation environment guidelines.
- A quick installation guide for getting started with the router's basic configuration.
- An overview of the router's web-based management interface for accessing advanced configuration settings. Sections include network settings, wireless settings, DHCP settings, and port forwarding/virtual server functions.
- Compliance certifications and declarations for operating the router in accordance with radio frequency emission regulations.
The document provides instructions for installing and configuring the IEEE 802.11a/n Wireless Outdoor CPE. It covers preparing for installation, connecting the hardware, mounting the CPE on a pole, and configuring the device for either AP mode or CPE mode. The installation requires connecting an Ethernet cable and power adapter, attaching optional external antennas, and accessing the web interface using the default IP and credentials. Configuration involves setting wireless parameters and security settings depending on whether the CPE is used as an access point or client.
The document discusses choosing the correct antennas for smart space applications. It provides an overview of TE Connectivity's broad portfolio of antenna products and their global support capabilities. It introduces the speaker, Cody Friszell, an antenna product manager at TE with nearly 10 years of experience. The rest of the document discusses TE's antenna strategy, product breadth, considerations for choosing the right antenna for an application, and different internal and external antenna integration types.
Motorola solutions ap622 access point installation guide (part no. 72 e 15780...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-0622 access point. It describes how to wall mount or ceiling mount both the integrated antenna and external antenna models. The external antenna model package contents and mounting options are also outlined. The document provides specifications for the access point and regulatory information.
The document is a user manual for the GreyRapid N Wireless Network Router. It provides an introduction to the router and its features, which include allowing multiple computers and network devices to share a single internet connection via Ethernet ports or wireless connectivity. It also lists the contents of the manual, which covers topics like system setup, configuration of wired and wireless networks, advanced functions such as quality of service, security, and troubleshooting. The manual is intended to guide users through installing and using the router to set up a home or small office network.
The document is an installation guide for the AP6522 Access Point. It provides instructions on hardware installation including wall mounting and suspended ceiling mounting for integrated antenna and external antenna models. It also lists package contents, specifications, warnings and regulatory information. The guide is intended for qualified network installers to properly setup and configure the access point.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the AP-621 Series access point. It describes the package contents, features of the access point, and guidelines for hardware installation including wall mounting, suspended ceiling mounting, and above-ceiling mounting. Precautions and considerations for optimal access point placement are also covered. Specifications for electrical, physical, and radio characteristics are listed.
Motorola solutions ap621 access point installation guide (part no. 72 e 15545...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP-621 Series Access Point. It describes the package contents, features of the access point, and guidelines for hardware installation including wall mounting, mounting under a suspended ceiling, and above-ceiling installation. Detailed instructions are provided for each installation method. Power options including a Power Injector that combines data and power over a single Ethernet cable are also discussed.
Antenna design for sigfox ready devices recommendation guideSigfox
In this document, several aspects of antenna design and integration are developed. The document focuses on SIGFOX IOT application and small form factor devices.
The importance of implementing a high-performance antenna in a device is demonstrated by analyzing the SIGFOX radio link budget.
Theories are then developed to explain why antennas can be extremely sensitive to their environment and may therefore have varying performance (e.g. when held compared to standing alone). Using the same arguments, it is shown that the same antenna can have different behavior when implemented in two distinct device architectures. This leads to an initial finding that for each device development, a specific antenna design, or at least antenna tuning, must be carried out.
Then, the most important physical parameters that impact antenna characteristics and behavior are presented. Several typical antenna topologies, miniaturization techniques, and manufacturing techniques applicable to SIGFOX IOT applications and small form factor devices are listed.
Advice regarding off-the-shelf antennas is given to explain why antenna performance depicted in datasheets may differ from “real-life implementation” performance.
A selection tool will help the reader to select the best antenna topology for the device, based on several parameters such as expected performance, integration or miniaturization level, and design complexity.
To close the document, a simple method that roughly estimates devices radiated performance is given. This method does not involve very expensive equipment, such as anechoic chambers, and is relatively easy to set up.
The document provides instructions for cabling a Nokia Flexi EDGE base station, including connecting internal bus cables, power cables, RF cables, antenna jumper cables, transmission cables, and optional alarm cables. Safety precautions are outlined such as avoiding excessive cable bending and ensuring all connector seals are in place. Port locations and cable routing are also described.
IRJET - Visible Light Communication for Video TransmissionIRJET Journal
This document discusses using visible light communication (VLC) to transmit video signals wirelessly using light-emitting diodes (LEDs). It proposes a system using an LED to transmit video data that is received by a photodiode and processed into a video signal. The system was tested by transmitting a 30-second, 111.98KB video file between a transmitter and receiver 1 meter apart in under 2 minutes. VLC using LEDs for transmission provides advantages over Wi-Fi like higher bandwidth and more secure communication.
The document provides a product description for Huawei's 3900 Series Base Station, including:
- An overview of the base station's architecture, which uses BBUs, RFUs, and RRUs as basic modules.
- Descriptions of typical configurations for indoor macro base stations using BTS3900/BTS3900(Ver. C) cabinets, including single-mode and dual-mode configurations.
- Details on the internal structures of BTS3900 and BTS3900(Ver. C) cabinets supporting different power inputs.
Similar to silo.tips_technical-white-paper-for-the-easyret-antenna-solution.pdf (20)
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.