This safety data sheet provides information on the product SIGNAL. It contains hazards identification, composition/information on ingredients, first aid measures, and other important safety and handling information. The product is classified as harmful if swallowed, may cause respiratory irritation, and is very toxic to aquatic life with long lasting effects. It contains the active ingredient cypermethrin.
This document provides information on the identification, hazards, composition, and safe handling of calcium lignosulfonate. It identifies the substance, lists relevant hazards as low risk, and provides the contact information for the supplier, GREEN AGROCHEM, located in Beijing, China. Safety precautions are outlined for handling, storage, exposure control, firefighting, accidental release, and handling of the substance.
This safety data sheet provides information on the product NeoNet L 500. It identifies the product, supplier contact information, product composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other information. The main hazardous components are identified as CIPC (47-51%) which is suspected of causing cancer and may cause damage to organs through prolonged or repeated exposure.
This safety data sheet provides information on the product TALISMA UL. It contains a mixture of cypermethrin and piperonyl butoxide. The document lists hazards such as being very toxic to aquatic life with long lasting effects. It provides handling, storage, exposure and personal protective equipment recommendations. The product has a density of 0.8933 g/ml and a flash point above 79°C. It is not readily biodegradable and components may bioaccumulate in fish and other organisms.
This document provides safety information about Brodifacoum Technical Material. It lists Brodifacoum as the active ingredient and classifies it as highly toxic if swallowed or absorbed through skin contact. The document outlines handling, storage, exposure and first aid procedures to mitigate health and environmental risks. It also provides physical and chemical properties, toxicological data, and disposal guidance in compliance with relevant regulations.
This document provides a safety data sheet for RANCONA i-MIX fungicide. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other sections. Key information includes:
- The product contains ipconazole and imazalil and is classified as hazardous to aquatic life with long lasting effects.
- Personal protective equipment such as gloves, protective clothing and safety glasses are recommended when handling the product.
- In case of skin or eye contact, rinse immediately with water and seek medical attention if symptoms persist.
This safety data sheet provides information on the product Enviromite 480SC.
- It is an acaricide used in plant protection.
- The main hazardous component is Bifenazate, which is an irritant and dangerous for the environment.
- Exposure can cause sensitization by skin contact. Protective equipment should be worn when handling.
- The product is toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment. Care should be taken to prevent environmental contamination during use and storage.
Bromadiolone is a rodenticide used to formulate baits. It is classified as very toxic if swallowed or absorbed through skin. It causes internal bleeding and damage to organs over prolonged or repeated exposure. Bromadiolone is also very toxic to aquatic life and can pollute soil and water. Proper protective equipment should be worn when handling. It degrades slowly and can bioaccumulate in organisms. Disposal requires approved incineration or treatment due to its toxicity.
The document provides safety information about a product called Pt-01. It contains several hazardous chemicals including strong caustics that are toxic if swallowed or inhaled and corrosive to skin. The product should only be used with protective equipment and in well ventilated areas. It can cause burns if not treated promptly upon contact with skin or eyes.
This document provides information on the identification, hazards, composition, and safe handling of calcium lignosulfonate. It identifies the substance, lists relevant hazards as low risk, and provides the contact information for the supplier, GREEN AGROCHEM, located in Beijing, China. Safety precautions are outlined for handling, storage, exposure control, firefighting, accidental release, and handling of the substance.
This safety data sheet provides information on the product NeoNet L 500. It identifies the product, supplier contact information, product composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other information. The main hazardous components are identified as CIPC (47-51%) which is suspected of causing cancer and may cause damage to organs through prolonged or repeated exposure.
This safety data sheet provides information on the product TALISMA UL. It contains a mixture of cypermethrin and piperonyl butoxide. The document lists hazards such as being very toxic to aquatic life with long lasting effects. It provides handling, storage, exposure and personal protective equipment recommendations. The product has a density of 0.8933 g/ml and a flash point above 79°C. It is not readily biodegradable and components may bioaccumulate in fish and other organisms.
This document provides safety information about Brodifacoum Technical Material. It lists Brodifacoum as the active ingredient and classifies it as highly toxic if swallowed or absorbed through skin contact. The document outlines handling, storage, exposure and first aid procedures to mitigate health and environmental risks. It also provides physical and chemical properties, toxicological data, and disposal guidance in compliance with relevant regulations.
This document provides a safety data sheet for RANCONA i-MIX fungicide. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other sections. Key information includes:
- The product contains ipconazole and imazalil and is classified as hazardous to aquatic life with long lasting effects.
- Personal protective equipment such as gloves, protective clothing and safety glasses are recommended when handling the product.
- In case of skin or eye contact, rinse immediately with water and seek medical attention if symptoms persist.
This safety data sheet provides information on the product Enviromite 480SC.
- It is an acaricide used in plant protection.
- The main hazardous component is Bifenazate, which is an irritant and dangerous for the environment.
- Exposure can cause sensitization by skin contact. Protective equipment should be worn when handling.
- The product is toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment. Care should be taken to prevent environmental contamination during use and storage.
Bromadiolone is a rodenticide used to formulate baits. It is classified as very toxic if swallowed or absorbed through skin. It causes internal bleeding and damage to organs over prolonged or repeated exposure. Bromadiolone is also very toxic to aquatic life and can pollute soil and water. Proper protective equipment should be worn when handling. It degrades slowly and can bioaccumulate in organisms. Disposal requires approved incineration or treatment due to its toxicity.
The document provides safety information about a product called Pt-01. It contains several hazardous chemicals including strong caustics that are toxic if swallowed or inhaled and corrosive to skin. The product should only be used with protective equipment and in well ventilated areas. It can cause burns if not treated promptly upon contact with skin or eyes.
This document provides a safety data sheet for the product TALISMA EC. It contains information on product identification, composition, hazards, first aid measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other safety-related details. The main hazardous components are cypermethrin and piperonyl butoxide. TALISMA EC is harmful if swallowed, may cause an allergic skin reaction, and is very toxic to aquatic life with long lasting effects.
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
Hals 292 tinuvin 292 cas 41556 26-7 cas 82919-37-7 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides safety information for the product Proxanil. It contains the following key information:
- Proxanil is a fungicide mixture containing propamocarb hydrochloride, cymoxanil, citric acid, and propylene glycol.
- It may be corrosive to metals and cause skin and eye irritation. It is suspected of damaging fertility and the unborn child.
- Personal protective equipment including gloves, goggles and protective clothing should be worn when handling.
- In case of accidental release, collect any spills and dispose of properly. Ventilate areas of spill and wash exposed skin.
- Store in original closed container away from heat and ignition sources. Keep
This document provides a safety data sheet for Proplant, a fungicide product. It identifies the product and supplier, lists its main uses as an agricultural fungicide, and classifies the product as a skin sensitizer. The document provides guidance on safe handling, storage, exposure controls and emergency procedures for the product. Key hazards are identified as skin sensitization and the need to avoid contact with skin and inhalation of the product.
This document provides safety information for the fungicide PP Captan 80 WG. It identifies the product and supplier, lists hazards such as eye and skin irritation and carcinogenicity, and provides guidance on handling, storage, exposure controls, firefighting and accidental release. The product contains 80% captan as the active ingredient and is a water dispersible granule. It requires protective equipment due to the risks of eye damage, skin sensitization and cancer.
This safety data sheet provides information on a cleaner product called LOCTITE SF 7039 400ML. It lists the product identifier and supplier contact information. The product is classified as an aerosol and contains several hazardous components, including hydrocarbons, ethanol, dimethoxymethane, and propan-2-ol. It may cause skin and eye irritation and respiratory effects. Exposure guidelines and precautions for handling and storage are provided. The product contains mixtures that could be hazardous if safety precautions are not followed.
This document provides information on the identification, hazards, composition, and safe handling of calcium lignosulfonate. It identifies the substance and supplier, summarizes that it is not classified as hazardous but should be treated with caution. Exposure controls including protective equipment and storage requirements are outlined to safely handle the substance.
This document is a safety data sheet for Enviromite 480SC, an acaricide product. It lists the product identifier and company details. It identifies the product as a plant protection agent and acaricide. The document outlines health and environmental hazards including skin sensitization and toxicity to aquatic organisms. It provides first aid measures in case of exposure and lists personal protective equipment for handling.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
This document provides safety information for the product Forester. It identifies Forester as a mixture containing the active ingredient Cypermethrin cis/trans at a concentration of 9.6-10.6%. Forester is classified as harmful if swallowed, may cause an allergic skin reaction, and is very toxic to aquatic life with long lasting effects. Emergency contact information is provided. Personal protective equipment is advised when handling Forester, which should be stored in a cool, well ventilated area away from heat and direct sunlight.
This safety data sheet provides information on Loctite 270 adhesive. It lists the product identifier and supplier contact information in section 1. Section 2 describes the product as causing skin, eye, and respiratory irritation and being a skin sensitizer. The product contains hazardous substances like 3,3,5 trimethylcyclohexyl methacrylate and cumene hydroperoxide that are classified and listed in section 3. Section 4 provides first aid measures for potential exposure.
This safety data sheet provides information on the properties and safe handling of tetrahydrofuran. It identifies tetrahydrofuran as a highly flammable liquid that can cause eye and respiratory irritation upon contact. The document lists personal protective equipment requirements and safety precautions for handling and storing tetrahydrofuran. It also provides physical and chemical property data as well as toxicology information.
This safety data sheet provides information on Pyrus 400 SC, a fungicide product. It contains the active ingredient pyrimethanil at a concentration of 35.5-38.5%. The product is toxic to aquatic life with long lasting effects and precautions should be taken to avoid release to the environment. Personal protective equipment including gloves and safety glasses are recommended when handling the product.
polysorbate 20 msds material safety data sheethuana com
"Material Safety Data Sheet
according to Regulation GB/T 16483-2008 and UN GHS(Rev.4)
Polyoxyethylene (20) sorbitan monolaurate
Doc no.: RHB-STP-GY-013-2019 Version: C/0 Revision Date: 25-Nov-2019
Section 1: Chemical Product and Company Identification
1.1 Product identifier
Product name Polyoxyethylene (20) sorbitan monolaurate
Other name Polysorbate 20
CAS number 9005-64-5
1.2 Recommended uses and uses advised against
Recommended use According to GB2760-2014, use as emulsifier
in food, pharmaceutical, industrial, cosmetics
and other industries
Uses advised against Unknown."
Oral Long term
exposure -
systemic effects
26 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Dermal Long term
exposure -
systemic effects
319 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Inhalation Long term
exposure -
systemic effects
89 mg/m3
Ethanol
64-17-5
Workers Dermal Long term
exposure -
systemic effects
343 mg/kg bw/day
Ethanol
64-17-5
Workers Inhalation Long term
exposure -
systemic
This safety data sheet provides information on LOCTITE 222 anaerobic adhesive. It lists the product identifier and supplier contact information. The product contains cumene hydroperoxide and other hazardous ingredients. It is classified as causing serious eye irritation and respiratory irritation. Exposure guidelines and personal protective equipment requirements are also outlined, including the need for gloves, safety glasses and adequate ventilation when handling the product.
This document provides a safety data sheet for DL-Carnitine hydrochloride. It lists the product identifiers and supplier contact information. The substance is classified as causing skin irritation, eye irritation, and may cause respiratory irritation. Personal protective equipment is recommended when handling the substance, including gloves, eye protection and respiratory protection. The substance should be stored in a dry, cool area and handled according to good industrial hygiene practices.
This safety data sheet provides information on a range of UPOL bodyfiller products. It identifies the products and company details. The main component is styrene which is harmful if inhaled and irritating. Personal protective equipment should be worn when handling the products. The products are flammable pastes and adequate ventilation should be provided when using them. Inhalation or skin contact may cause irritation. If swallowed, do not induce vomiting and seek medical advice.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This document provides safety information about DryWired® Liquid NanoTint Hardener. It identifies the product and supplier, lists the product's hazards including potential health effects, and provides guidance on safe handling and storage. The product contains poly(hexamethylene diisocyanate) and DBE-5 Dibasic ester. Exposure can cause eye, skin, and respiratory irritation or sensitization. Proper personal protective equipment should be worn when handling.
This document provides a safety data sheet for the product TALISMA EC. It contains information on product identification, composition, hazards, first aid measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other safety-related details. The main hazardous components are cypermethrin and piperonyl butoxide. TALISMA EC is harmful if swallowed, may cause an allergic skin reaction, and is very toxic to aquatic life with long lasting effects.
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
Hals 292 tinuvin 292 cas 41556 26-7 cas 82919-37-7 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides safety information for the product Proxanil. It contains the following key information:
- Proxanil is a fungicide mixture containing propamocarb hydrochloride, cymoxanil, citric acid, and propylene glycol.
- It may be corrosive to metals and cause skin and eye irritation. It is suspected of damaging fertility and the unborn child.
- Personal protective equipment including gloves, goggles and protective clothing should be worn when handling.
- In case of accidental release, collect any spills and dispose of properly. Ventilate areas of spill and wash exposed skin.
- Store in original closed container away from heat and ignition sources. Keep
This document provides a safety data sheet for Proplant, a fungicide product. It identifies the product and supplier, lists its main uses as an agricultural fungicide, and classifies the product as a skin sensitizer. The document provides guidance on safe handling, storage, exposure controls and emergency procedures for the product. Key hazards are identified as skin sensitization and the need to avoid contact with skin and inhalation of the product.
This document provides safety information for the fungicide PP Captan 80 WG. It identifies the product and supplier, lists hazards such as eye and skin irritation and carcinogenicity, and provides guidance on handling, storage, exposure controls, firefighting and accidental release. The product contains 80% captan as the active ingredient and is a water dispersible granule. It requires protective equipment due to the risks of eye damage, skin sensitization and cancer.
This safety data sheet provides information on a cleaner product called LOCTITE SF 7039 400ML. It lists the product identifier and supplier contact information. The product is classified as an aerosol and contains several hazardous components, including hydrocarbons, ethanol, dimethoxymethane, and propan-2-ol. It may cause skin and eye irritation and respiratory effects. Exposure guidelines and precautions for handling and storage are provided. The product contains mixtures that could be hazardous if safety precautions are not followed.
This document provides information on the identification, hazards, composition, and safe handling of calcium lignosulfonate. It identifies the substance and supplier, summarizes that it is not classified as hazardous but should be treated with caution. Exposure controls including protective equipment and storage requirements are outlined to safely handle the substance.
This document is a safety data sheet for Enviromite 480SC, an acaricide product. It lists the product identifier and company details. It identifies the product as a plant protection agent and acaricide. The document outlines health and environmental hazards including skin sensitization and toxicity to aquatic organisms. It provides first aid measures in case of exposure and lists personal protective equipment for handling.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
This document provides safety information for the product Forester. It identifies Forester as a mixture containing the active ingredient Cypermethrin cis/trans at a concentration of 9.6-10.6%. Forester is classified as harmful if swallowed, may cause an allergic skin reaction, and is very toxic to aquatic life with long lasting effects. Emergency contact information is provided. Personal protective equipment is advised when handling Forester, which should be stored in a cool, well ventilated area away from heat and direct sunlight.
This safety data sheet provides information on Loctite 270 adhesive. It lists the product identifier and supplier contact information in section 1. Section 2 describes the product as causing skin, eye, and respiratory irritation and being a skin sensitizer. The product contains hazardous substances like 3,3,5 trimethylcyclohexyl methacrylate and cumene hydroperoxide that are classified and listed in section 3. Section 4 provides first aid measures for potential exposure.
This safety data sheet provides information on the properties and safe handling of tetrahydrofuran. It identifies tetrahydrofuran as a highly flammable liquid that can cause eye and respiratory irritation upon contact. The document lists personal protective equipment requirements and safety precautions for handling and storing tetrahydrofuran. It also provides physical and chemical property data as well as toxicology information.
This safety data sheet provides information on Pyrus 400 SC, a fungicide product. It contains the active ingredient pyrimethanil at a concentration of 35.5-38.5%. The product is toxic to aquatic life with long lasting effects and precautions should be taken to avoid release to the environment. Personal protective equipment including gloves and safety glasses are recommended when handling the product.
polysorbate 20 msds material safety data sheethuana com
"Material Safety Data Sheet
according to Regulation GB/T 16483-2008 and UN GHS(Rev.4)
Polyoxyethylene (20) sorbitan monolaurate
Doc no.: RHB-STP-GY-013-2019 Version: C/0 Revision Date: 25-Nov-2019
Section 1: Chemical Product and Company Identification
1.1 Product identifier
Product name Polyoxyethylene (20) sorbitan monolaurate
Other name Polysorbate 20
CAS number 9005-64-5
1.2 Recommended uses and uses advised against
Recommended use According to GB2760-2014, use as emulsifier
in food, pharmaceutical, industrial, cosmetics
and other industries
Uses advised against Unknown."
Oral Long term
exposure -
systemic effects
26 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Dermal Long term
exposure -
systemic effects
319 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Inhalation Long term
exposure -
systemic effects
89 mg/m3
Ethanol
64-17-5
Workers Dermal Long term
exposure -
systemic effects
343 mg/kg bw/day
Ethanol
64-17-5
Workers Inhalation Long term
exposure -
systemic
This safety data sheet provides information on LOCTITE 222 anaerobic adhesive. It lists the product identifier and supplier contact information. The product contains cumene hydroperoxide and other hazardous ingredients. It is classified as causing serious eye irritation and respiratory irritation. Exposure guidelines and personal protective equipment requirements are also outlined, including the need for gloves, safety glasses and adequate ventilation when handling the product.
This document provides a safety data sheet for DL-Carnitine hydrochloride. It lists the product identifiers and supplier contact information. The substance is classified as causing skin irritation, eye irritation, and may cause respiratory irritation. Personal protective equipment is recommended when handling the substance, including gloves, eye protection and respiratory protection. The substance should be stored in a dry, cool area and handled according to good industrial hygiene practices.
This safety data sheet provides information on a range of UPOL bodyfiller products. It identifies the products and company details. The main component is styrene which is harmful if inhaled and irritating. Personal protective equipment should be worn when handling the products. The products are flammable pastes and adequate ventilation should be provided when using them. Inhalation or skin contact may cause irritation. If swallowed, do not induce vomiting and seek medical advice.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This document provides safety information about DryWired® Liquid NanoTint Hardener. It identifies the product and supplier, lists the product's hazards including potential health effects, and provides guidance on safe handling and storage. The product contains poly(hexamethylene diisocyanate) and DBE-5 Dibasic ester. Exposure can cause eye, skin, and respiratory irritation or sensitization. Proper personal protective equipment should be worn when handling.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
sorbitan monostearate msds material safety data sheethuana com
"Material Safety Data Sheet
according to Regulation GB/T 16483-2008 and UN GHS(Rev.4)
Sorbitan monostearate
Doc no.: RHB-STP-GY-005-2019 Version: C/0 Revision Date: 25-Nov-2019
Section 1: Chemical Product and Company Identification
1.1 Product identifier
Product name Sorbitan monostearate
CAS number 1338-41-6
1.2 Recommended uses and uses advised against
Recommended use According to GB2760-2014, use as emulsifier
in food, pharmaceutical, industrial, cosmetics
and other industries
Uses advised against Unknown
1.3 Details of the manufacturer of the safety data sheet
Company Guangdong Runhua Chemistry Co., Ltd. No.7 Jinnan 2
nd Road, Fine Chemical Industry
Base, Qinghua Park, Donghuazhen, Yingde, Guangdong, 513058, China
86-020-36293412
Contact person YAO Kunhui
Emergency Tel 86-0763-2606712 (24HR)
Email address gdrh@gdrunhua.com
Company Guangdong Runhua Chemistry Co., Ltd."
polysorbate 60 msds material safety data sheethuana com
"Material Safety Data Sheet
according to Regulation GB/T 16483-2008 and UN GHS(Rev.4)
Polyoxyethylene (20) sorbitan monostearate
Doc no.: RHB-STP-GY-016-2019 Version: C/0 Revision Date: 25-Nov-2019
Section 1: Chemical Product and Company Identification
1.1 Product identifier
Product name Polyoxyethylene (20) sorbitan monostearate
Other name Polysorbate 60
CAS number 9005-67-8
1.2 Recommended uses and uses advised against
Recommended use According to GB2760-2014, use as emulsifier
in food, pharmaceutical, industrial, cosmetics
and other industries
Uses advised against Unknown
1.3 Details of the manufacturer of the safety data sheet
Company Guangdong Runhua Chemistry Co., Ltd. No.7 Jinnan 2
nd Road, Fine Chemical Industry
Base, Qinghua Park, Donghuazhen, Yingde, Guangdong, 513058, China
86-020-36293412
Contact person YAO Kunhui
Emergency Tel 86-0763-2606712 (24HR)
Email address gdrh@gdrunhua.com."
This document provides information on the chemical 4-Fluorobenzoyl chloride (CAS 403-43-0) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, disposal considerations, and transportation. It identifies 4-Fluorobenzoyl chloride as a skin and eye irritant that can cause severe burns, and lists requirements for proper personal protective equipment when handling.
Fit to Fly PCR Covid Testing at our Clinic Near YouNX Healthcare
A Fit-to-Fly PCR Test is a crucial service for travelers needing to meet the entry requirements of various countries or airlines. This test involves a polymerase chain reaction (PCR) test for COVID-19, which is considered the gold standard for detecting active infections. At our travel clinic in Leeds, we offer fast and reliable Fit to Fly PCR testing, providing you with an official certificate verifying your negative COVID-19 status. Our process is designed for convenience and accuracy, with quick turnaround times to ensure you receive your results and certificate in time for your departure. Trust our professional and experienced medical team to help you travel safely and compliantly, giving you peace of mind for your journey.www.nxhealthcare.co.uk
This particular slides consist of- what is hypotension,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is the summary of hypotension:
Hypotension, or low blood pressure, is when the pressure of blood circulating in the body is lower than normal or expected. It's only a problem if it negatively impacts the body and causes symptoms. Normal blood pressure is usually between 90/60 mmHg and 120/80 mmHg, but pressures below 90/60 are generally considered hypotensive.
As Mumbai's premier kidney transplant and donation center, L H Hiranandani Hospital Powai is not just a medical facility; it's a beacon of hope where cutting-edge science meets compassionate care, transforming lives and redefining the standards of kidney health in India.
CHAPTER 1 SEMESTER V COMMUNICATION TECHNIQUES FOR CHILDREN.pdfSachin Sharma
Here are some key objectives of communication with children:
Build Trust and Security:
Establish a safe and supportive environment where children feel comfortable expressing themselves.
Encourage Expression:
Enable children to articulate their thoughts, feelings, and experiences.
Promote Emotional Understanding:
Help children identify and understand their own emotions and the emotions of others.
Enhance Listening Skills:
Develop children’s ability to listen attentively and respond appropriately.
Foster Positive Relationships:
Strengthen the bond between children and caregivers, peers, and other adults.
Support Learning and Development:
Aid cognitive and language development through engaging and meaningful conversations.
Teach Social Skills:
Encourage polite, respectful, and empathetic interactions with others.
Resolve Conflicts:
Provide tools and guidance for children to handle disagreements constructively.
Encourage Independence:
Support children in making decisions and solving problems on their own.
Provide Reassurance and Comfort:
Offer comfort and understanding during times of distress or uncertainty.
Reinforce Positive Behavior:
Acknowledge and encourage positive actions and behaviors.
Guide and Educate:
Offer clear instructions and explanations to help children understand expectations and learn new concepts.
By focusing on these objectives, communication with children can be both effective and nurturing, supporting their overall growth and well-being.
Sectional dentures for microstomia patients.pptxSatvikaPrasad
Microstomia, characterized by an abnormally small oral aperture, presents significant challenges in prosthodontic treatment, including limited access for examination, difficulties in impression making, and challenges with prosthesis insertion and removal. To manage these issues, customized impression techniques using sectional trays and elastomeric materials are employed. Prostheses may be designed in segments or with flexible materials to facilitate handling. Minimally invasive procedures and the use of digital technologies can enhance patient comfort. Education and training for patients on prosthesis care and maintenance are crucial for compliance. Regular follow-up and a multidisciplinary approach, involving collaboration with other specialists, ensure comprehensive care and improved quality of life for microstomia patients.
The Importance of Black Women Understanding the Chemicals in Their Personal C...bkling
Certain chemicals, such as phthalates and parabens, can disrupt the body's hormones and have significant effects on health. According to data, hormone-related health issues such as uterine fibroids, infertility, early puberty and more aggressive forms of breast and endometrial cancers disproportionately affect Black women. Our guest speaker, Jasmine A. McDonald, PhD, an Assistant Professor in the Department of Epidemiology at Columbia University in New York City, discusses the scientific reasons why Black women should pay attention to specific chemicals in their personal care products, like hair care, and ways to minimize their exposure.
This particular slides consist of- what is Pneumothorax,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is a summary of Pneumothorax:
Pneumothorax, also known as a collapsed lung, is a condition that occurs when air leaks into the space between the lung and chest wall. This air buildup puts pressure on the lung, preventing it from expanding fully when you breathe. A pneumothorax can cause a complete or partial collapse of the lung.
The facial nerve, also known as cranial nerve VII, is one of the 12 cranial nerves originating from the brain. It's a mixed nerve, meaning it contains both sensory and motor fibres, and it plays a crucial role in controlling various facial muscles, as well as conveying sensory information from the taste buds on the anterior two-thirds of the tongue.
R3 Stem Cell Therapy: A New Hope for Women with Ovarian FailureR3 Stem Cell
Discover the groundbreaking advancements in stem cell therapy by R3 Stem Cell, offering new hope for women with ovarian failure. This innovative treatment aims to restore ovarian function, improve fertility, and enhance overall well-being, revolutionizing reproductive health for women worldwide.
Mental Health and well-being Presentation. Exploring innovative approaches and strategies for enhancing mental well-being. Discover cutting-edge research, effective strategies, and practical methods for fostering mental well-being.
NURSING MANAGEMENT OF PATIENT WITH EMPHYSEMA .PPTblessyjannu21
Prepared by Prof. BLESSY THOMAS, VICE PRINCIPAL, FNCON, SPN.
Emphysema is a disease condition of respiratory system.
Emphysema is an abnormal permanent enlargement of the air spaces distal to terminal bronchioles, accompanied by destruction of their walls and without obvious fibrosis.
Emphysema of lung is defined as hyper inflation of the lung ais spaces due to obstruction of non respiratory bronchioles as due to loss of elasticity of alveoli.
It is a type of chronic obstructive
pulmonary disease.
It is a progressive disease of lungs.
Hypertension and it's role of physiotherapy in it.Vishal kr Thakur
This particular slides consist of- what is hypertension,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is summary of hypertension -
Hypertension, also known as high blood pressure, is a serious medical condition that occurs when blood pressure in the body's arteries is consistently too high. Blood pressure is the force of blood pushing against the walls of blood vessels as the heart pumps it. Hypertension can increase the risk of heart disease, brain disease, kidney disease, and premature death.
VEDANTA AIR AMBULANCE SERVICES IN REWA AT A COST-EFFECTIVE PRICE.pdfVedanta A
Air Ambulance Services In Rewa works in close coordination with ground-based emergency services, including local Emergency Medical Services, fire departments, and law enforcement agencies.
More@: https://tinyurl.com/2shrryhx
More@: https://tinyurl.com/5n8h3wp8
TEST BANK FOR Health Assessment in Nursing 7th Edition by Weber Chapters 1 - ...rightmanforbloodline
TEST BANK FOR Health Assessment in Nursing 7th Edition by Weber Chapters 1 - 34.
TEST BANK FOR Health Assessment in Nursing 7th Edition by Weber Chapters 1 - 34.
TEST BANK FOR Health Assessment in Nursing 7th Edition by Weber Chapters 1 - 34.
Management of Post Operative Pain: to make doctors conscious about the benefi...
Signal 300 es msds
1. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
1 / 17
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Trade name : SIGNAL
Product code : 400000003975
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the Sub-
stance/Mixture
: Seed treatment
Recommended restrictions
on use
: Agriculture, For professional users only.
1.3 Details of the supplier of the safety data sheet
Manufacturer or supplier's details
Company: Chemtura Europe Limited
Brooklands Farm, Cheltenham Road
Evesham, Worcestershire
United Kingdom
WR11 2LS
Telephone : +44 1386 425500
Prepared by sds.request@arysta.com
Further information for the safety data sheet :
sds.request@arysta.com
1.4 Emergency telephone number
Emergency telephone num-
ber:
+44 (0) 1235 239 670 (NCEC)
For additional emergency telephone numbers see section 16 of
the Safety Data Sheet.
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008)
Acute toxicity, Category 4 H302: Harmful if swallowed.
2. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
2 / 17
Specific target organ toxicity - single ex-
posure, Category 3, Respiratory system
H335: May cause respiratory irritation.
Acute aquatic toxicity, Category 1 H400: Very toxic to aquatic life.
Chronic aquatic toxicity, Category 1 H410: Very toxic to aquatic life with long lasting
effects.
2.2 Label elements
Labelling (REGULATION (EC) No 1272/2008)
Hazard pictograms :
Signal word : Warning
Hazard statements : H302 Harmful if swallowed.
H335 May cause respiratory irritation.
H410 Very toxic to aquatic life with long lasting
effects.
Precautionary statements : Prevention:
P261 Avoid breathing dust/ fume/ gas/ mist/ va-
pours/ spray.
P273 Avoid release to the environment.
Response:
P304 + P340 + P312 IF INHALED: Remove person to fresh
air and keep comfortable for breathing. Call
a POISON CENTER or doctor/ physician if
you feel unwell.
P391 Collect spillage.
Storage:
P403 + P233 Store in a well-ventilated place. Keep con-
tainer tightly closed.
Disposal:
P501 Dispose of contents/ container to an ap-
proved waste disposal plant.
Hazardous components which must be listed on the label:
Cypermethrin (cis/trans +/- 40/60)
Supplemental Hazard
Statements
: EUH401 To avoid risks to human health and the
environment, comply with the instructions
for use.
Additional Labelling:
EUH208 Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
3. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
3 / 17
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula-
tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or
higher.
SECTION 3: Composition/information on ingredients
3.2 Mixtures
Hazardous components
Chemical Name CAS-No.
EC-No.
Registration number
Classification Concentration
(% w/w)
Cypermethrin (cis/trans +/- 40/60) 52315-07-8
257-842-9
Acute Tox. 4; H302
Acute Tox. 4; H332
STOT SE 3; H335
Aquatic Acute 1;
H400
Aquatic Chronic 1;
H410
>= 25 - < 30
ethane-1,2-diol 107-21-1
203-473-3
Acute Tox. 4; H302 >= 1 - < 10
1,2-benzisothiazol-3(2H)-one 2634-33-5
220-120-9
Acute Tox. 4; H302
Skin Irrit. 2; H315
Eye Dam. 1; H318
Skin Sens. 1; H317
Aquatic Acute 1;
H400
< 0.05
For explanation of abbreviations see section 16.
SECTION 4: First aid measures
4.1 Description of first aid measures
If inhaled : Remove to fresh air.
Obtain medical attention.
In case of skin contact : Remove contaminated clothing and shoes.
Wash off with warm water and soap.
If symptoms persist, call a physician.
In case of eye contact : Rinse immediately with plenty of water, also under the eyelids,
for at least 15 minutes.
If symptoms persist, call a physician.
If swallowed : Do NOT induce vomiting.
Rinse mouth with water.
Obtain medical attention.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms : irritant effects
Risks : Harmful if swallowed.
4. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
4 / 17
May cause respiratory irritation.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment : The first aid procedure should be established in consultation
with the doctor responsible for industrial medicine.
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media : Extinguishing media - large fires
Alcohol-resistant foam
(on small fires)
Carbon dioxide (CO2)
Dry chemical
Water spray
Unsuitable extinguishing
media
: Water spray jet
5.2 Special hazards arising from the substance or mixture
Specific hazards during fire-
fighting
: No information available.
5.3 Advice for firefighters
Special protective equipment
for firefighters
: In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.
Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Prevent fire extinguishing water from contaminating surface
water or the ground water system.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions : Wear suitable protective equipment.
Avoid contact with skin and eyes.
6.2 Environmental precautions
Environmental precautions : Discharge into the environment must be avoided.
Do not contaminate surface water.
Do not allow material to contaminate ground water system.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up : Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Shovel into suitable container for disposal.
Dam up.
5. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
5 / 17
Large spills should be collected mechanically (remove by
pumping) for disposal.
6.4 Reference to other sections
For personal protection see section 8.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Advice on safe handling : Handle in accordance with good industrial hygiene and safety
practice.
Avoid contact with skin, eyes and clothing.
Avoid inhalation of vapour or mist.
Use with adequate ventilation.
Wash thoroughly after handling.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage
areas and containers
: Keep in a dry, cool place.
Other data : Stable under recommended storage conditions.
7.3 Specific end use(s)
Specific use(s) : Seed treatment
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure Limits
Components CAS-No. Value type (Form
of exposure)
Control parameters Basis
ethane-1,2-diol 107-21-1 TWA 20 ppm
52 mg/m3
2000/39/EC
Further information Identifies the possibility of significant uptake through the skin, Indicative
STEL 40 ppm
104 mg/m3
2000/39/EC
Further information Identifies the possibility of significant uptake through the skin, Indicative
TWA (Vapour) 20 ppm
52 mg/m3
GB EH40
Further information Can be absorbed through skin. The assigned substances are those for which
there are concerns that dermal absorption will lead to systemic toxicity.
TWA (particles) 10 mg/m3 GB EH40
Further information Can be absorbed through skin. The assigned substances are those for which
there are concerns that dermal absorption will lead to systemic toxicity.
STEL (Vapour) 40 ppm
104 mg/m3
GB EH40
Further information Can be absorbed through skin. The assigned substances are those for which
there are concerns that dermal absorption will lead to systemic toxicity.
6. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
6 / 17
8.2 Exposure controls
Personal protective equipment
Eye protection : Safety glasses with side-shields
Hand protection
Remarks : Impervious butyl rubber gloves
Skin and body protection : Impervious clothing
Respiratory protection : In the case of vapour formation use a respirator with an ap-
proved filter.
Respirator with a vapour filter (EN 141)
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance : viscous liquid
Colour : red
Odour : mild
characteristic
Odour Threshold : No data available
pH : 4 - 7, 1 %
: No data available
Boiling point/boiling range : 108 °C
Flash point : does not flash
Evaporation rate : No data available
Flammability (solid, gas) : Not applicable
Upper explosion limit : Not explosive
Lower explosion limit : Not explosive
Vapour pressure : No data available
Relative vapour density : No data available
Relative density : 1.08
Density : 1.1 g/cm3
7. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
7 / 17
Solubility(ies)
Water solubility : dispersible
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : 123 mPa.s (20 °C)
Viscosity, kinematic : No data available
Explosive properties : Not explosive
9.2 Other information
Self-Accelerating decomposi-
tion temperature (SADT)
: Method: No information available.
Oxidizing potential : The substance or mixture is not classified as oxidizing.
SECTION 10: Stability and reactivity
10.1 Reactivity
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions : Hazardous polymerisation does not occur.
10.4 Conditions to avoid
Conditions to avoid : Extremes of temperature and direct sunlight.
10.5 Incompatible materials
Materials to avoid : Oxidizing agents
Strong acids and strong bases
10.6 Hazardous decomposition products
No decomposition if stored and applied as directed.
SECTION 11: Toxicological information
8. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
8 / 17
11.1 Information on toxicological effects
Acute toxicity
Product:
Acute oral toxicity : LD50 (Rat, female): 307.3 mg/kg
Method: OECD Test Guideline 425
GLP: yes
Acute inhalation toxicity : Remarks: Based on available data, the classification criteria
are not met.
Acute toxicity estimate: > 20 mg/l
Exposure time: 4 h
Test atmosphere: vapour
Method: Calculation method
Acute dermal toxicity : LD50 (Rat): > 2,200 mg/kg
Method: OECD Test Guideline 402
GLP: yes
Components:
Cypermethrin (cis/trans +/- 40/60):
Acute oral toxicity : LD50 (Rat): 287 mg/kg
GLP: yes
Acute toxicity estimate: 500 mg/kg
Method: Converted acute toxicity point estimate
Acute toxicity estimate: 500 mg/kg
Method: Converted acute toxicity point estimate
Acute inhalation toxicity : LC50 (Rat): 3.28 mg/l
Test atmosphere: dust/mist
GLP: yes
Acute dermal toxicity : LD50 (Rat): > 2,000 mg/kg
GLP: yes
ethane-1,2-diol:
Acute oral toxicity : LD50 (Rat, female): 4,700 mg/kg
Acute dermal toxicity : LD50 (Rabbit): 10,670 mg/kg
1,2-benzisothiazol-3(2H)-one:
Acute oral toxicity : Acute toxicity estimate: 500 mg/kg
Method: Converted acute toxicity point estimate
Skin corrosion/irritation
Product:
Species: Rabbit
9. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
9 / 17
Method: OECD Test Guideline 404
Result: No skin irritation
GLP: yes
Components:
Cypermethrin (cis/trans +/- 40/60):
Species: Rabbit
Result: No skin irritation
GLP: yes
Serious eye damage/eye irritation
Product:
Species: Rabbit
Method: OECD Test Guideline 405
Result: slight irritation
GLP: yes
Components:
Cypermethrin (cis/trans +/- 40/60):
Species: Rabbit
Result: No eye irritation
GLP: yes
Respiratory or skin sensitisation
Product:
Species: Guinea pig
Method: Magnusson-Kligmann-Test
Result: Did not cause sensitisation on laboratory animals.
GLP: yes
Components:
Cypermethrin (cis/trans +/- 40/60):
Species: Guinea pig
Result: Did not cause sensitisation on laboratory animals.
GLP: yes
Germ cell mutagenicity
Product:
Germ cell mutagenicity- As-
sessment
: Based on available data, the classification criteria are not met.
Components:
Cypermethrin (cis/trans +/- 40/60):
Germ cell mutagenicity- As-
sessment
: negative
10. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
10 / 17
Carcinogenicity
Product:
Carcinogenicity - Assess-
ment
: Based on available data, the classification criteria are not met.
Components:
Cypermethrin (cis/trans +/- 40/60):
Carcinogenicity - Assess-
ment
: negative
Reproductive toxicity
Product:
Reproductive toxicity - As-
sessment
: Based on available data, the classification criteria are not met.
Components:
Cypermethrin (cis/trans +/- 40/60):
Effects on fertility : General Toxicity - Parent: No observed adverse effect level:
10 mg/kg bw/day
Effects on foetal develop-
ment
: Teratogenicity: No observed adverse effect level: 70 mg/kg
bw/day
STOT - single exposure
Product:
Assessment: May cause respiratory irritation.
STOT - repeated exposure
Product:
Assessment: Based on available data, the classification criteria are not met.
Repeated dose toxicity
Components:
Cypermethrin (cis/trans +/- 40/60):
Species: Dog
NOAEL: 500 ppm (12.5 mg/kg bw/d )
Exposure time: 90 d
GLP: yes
SECTION 12: Ecological information
11. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
11 / 17
12.1 Toxicity
Product:
Toxicity to fish : Remarks: Information refers to the main component.
Toxicity to daphnia and other
aquatic invertebrates
: Remarks: Information refers to the main component.
Toxicity to algae : Remarks: Information refers to the main component.
Components:
Cypermethrin (cis/trans +/- 40/60):
Toxicity to fish : LC50 (Salmo gairdneri): 0.0028 mg/l
Exposure time: 96 h
GLP: yes
Toxicity to daphnia and other
aquatic invertebrates
: EC50 (Daphnia magna (Water flea)): 0.0003 mg/l
Exposure time: 48 h
GLP: yes
Toxicity to algae : EC50 (Selenastrum capricornutum (green algae)): > 0.1 mg/l
M-Factor (Acute aquatic tox-
icity)
: 1,000
Toxicity to fish (Chronic toxic-
ity)
: NOEC: 0.00003 mg/l
Species: Pimephales promelas (fathead minnow)
Toxicity to daphnia and other
aquatic invertebrates (Chron-
ic toxicity)
: NOEC: 0.00004 mg/l
Exposure time: 21 d
M-Factor (Chronic aquatic
toxicity)
: 1,000
12.2 Persistence and degradability
Product:
Biodegradability : Remarks: No data available
Components:
Cypermethrin (cis/trans +/- 40/60):
Biodegradability : Result: Not readily biodegradable.
Stability in water : Hydrolysis: at 25 °C(> 100 d)
Photodegradation :
12. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
12 / 17
12.3 Bioaccumulative potential
Product:
Bioaccumulation : Remarks: No data available
Components:
ethane-1,2-diol:
Partition coefficient: n-
octanol/water
: log Pow: -1.3
12.4 Mobility in soil
Product:
Mobility : Remarks: No data available
Components:
Cypermethrin (cis/trans +/- 40/60):
Stability in soil : Soil temperature: 21 °C
Remarks: cis isomer
Soil temperature: 21 °C
Remarks: trans isomer
12.5 Results of PBT and vPvB assessment
Product:
Assessment : This substance/mixture contains no components considered
to be either persistent, bioaccumulative and toxic (PBT), or
very persistent and very bioaccumulative (vPvB) at levels of
0.1% or higher..
12.6 Other adverse effects
Product:
Additional ecological informa-
tion
: An environmental hazard cannot be excluded in the event of
unprofessional handling or disposal.
Very toxic to aquatic life with long lasting effects.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product : The product should not be allowed to enter drains, water
courses or the soil.
Do not contaminate ponds, waterways or ditches with chemi-
cal or used container.
Offer surplus and non-recyclable solutions to a licensed dis-
posal company.
Contaminated packaging : Empty remaining contents.
13. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
13 / 17
Dispose of as unused product.
Do not re-use empty containers.
SECTION 14: Transport information
14.1 UN number
ADN : UN 3082
ADR : UN 3082
RID : UN 3082
IMDG : UN 3082
IATA : UN 3082
14.2 UN proper shipping name
ADN : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(Cypermethrin)
ADR : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(Cypermethrin)
RID : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(Cypermethrin)
IMDG : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(Cypermethrin)
IATA : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(Cypermethrin)
14.3 Transport hazard class(es)
ADN : 9
ADR : 9
RID : 9
IMDG : 9
IATA : 9
14.4 Packing group
ADN
Packing group : III
Classification Code : M6
Hazard Identification Number : 90
Labels : 9
ADR
Packing group : III
14. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
14 / 17
Classification Code : M6
Hazard Identification Number : 90
Labels : 9
Tunnel restriction code : (E)
RID
Packing group : III
Classification Code : M6
Hazard Identification Number : 90
Labels : 9
IMDG
Packing group : III
Labels : 9
EmS Code : F-A, S-F
IATA
Packing instruction (cargo
aircraft)
: 964
Packing instruction (passen-
ger aircraft)
: 964
Packing instruction (LQ) : Y964
Packing group : III
Labels : Miscellaneous
14.5 Environmental hazards
ADN
Environmentally hazardous : yes
ADR
Environmentally hazardous : yes
RID
Environmentally hazardous : yes
IMDG
Marine pollutant : yes
14.6 Special precautions for user
Not applicable
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
Regulation (EC) No 649/2012 of the European Parlia-
ment and the Council concerning the export and import
of dangerous chemicals
: Not applicable
REACH - Candidate List of Substances of Very High
Concern for Authorisation (Article 59).
: Not applicable
15. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
15 / 17
Regulation (EC) No 1005/2009 on substances that de-
plete the ozone layer
: Not applicable
Regulation (EC) No 850/2004 on persistent organic pol-
lutants
: Not applicable
Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of
major-accident hazards involving dangerous substances.
Quantity 1 Quantity 2
E1 ENVIRONMENTAL
HAZARDS
100 t 200 t
Water contaminating class
(Germany)
: WGK 3 highly water endangering
Classification according VwVwS, Annex 4.
15.2 Chemical Safety Assessment
No information available.
SECTION 16: Other information
Full text of H-Statements
H302 : Harmful if swallowed.
H315 : Causes skin irritation.
H317 : May cause an allergic skin reaction.
H318 : Causes serious eye damage.
H332 : Harmful if inhaled.
H335 : May cause respiratory irritation.
H400 : Very toxic to aquatic life.
H410 : Very toxic to aquatic life with long lasting effects.
Full text of other abbreviations
Acute Tox. : Acute toxicity
Aquatic Acute : Acute aquatic toxicity
Aquatic Chronic : Chronic aquatic toxicity
Eye Dam. : Serious eye damage
Skin Irrit. : Skin irritation
Skin Sens. : Skin sensitisation
STOT SE : Specific target organ toxicity - single exposure
(Q)SAR - (Quantitative) Structure Activity Relationship; ADN - European Agreement concerning
the International Carriage of Dangerous Goods by Inland Waterways; ADR - European Agree-
ment concerning the International Carriage of Dangerous Goods by Road; ASTM - American So-
ciety for the Testing of Materials; bw - Body weight; CLP - Classification Labelling Packaging
Regulation; Regulation (EC) No 1272/2008; DIN - Standard of the German Institute for Standardi-
sation; ECHA - European Chemicals Agency; EC-Number - European Community number; ECx -
Concentration associated with x% response; ELx - Loading rate associated with x% response;
EmS - Emergency Schedule; ErCx - Concentration associated with x% growth rate response;
GHS - Globally Harmonized System; IARC - International Agency for Research on Cancer; IATA -
International Air Transport Association; IBC - International Code for the Construction and Equip-
ment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory concentra-
tion; ICAO - International Civil Aviation Organization; IMDG - International Maritime Dangerous
Goods; IMO - International Maritime Organization; ISO - International Organisation for Standardi-
16. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
16 / 17
zation; LC50 - Lethal Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a
test population (Median Lethal Dose); MARPOL - International Convention for the Prevention of
Pollution from Ships; n.o.s. - Not Otherwise Specified; NO(A)EC - No Observed (Adverse) Effect
Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect
Loading Rate; OECD - Organization for Economic Co-operation and Development; OPPTS - Of-
fice of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumulative and Toxic
substance; REACH - Regulation (EC) No 1907/2006 of the European Parliament and of the
Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals; RID
- Regulations concerning the International Carriage of Dangerous Goods by Rail; SADT - Self-
Accelerating Decomposition Temperature; SDS - Safety Data Sheet; TRGS - Technical Rule for
Hazardous Substances; UN - United Nations; vPvB - Very Persistent and Very Bioaccumulative;
DSL - Domestic Substances List (Canada); KECI - Korea Existing Chemicals Inventory; TSCA -
Toxic Substances Control Act (United States); AICS - Australian Inventory of Chemical Sub-
stances; IECSC - Inventory of Existing Chemical Substances in China; ENCS - Existing and New
Chemical Substances (Japan); ISHL - Industrial Safety and Health Law (Japan); PICCS - Philip-
pines Inventory of Chemicals and Chemical Substances; NZIoC - New Zealand Inventory of
Chemicals; TCSI - Taiwan Chemical Substance Inventory; CMR - Carcinogen, Mutagen or Re-
productive Toxicant; GLP - Good Laboratory Practice
Further information
The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
GB / EN
Carechem24 International Worldwide Coverage
Emergency Phone Number
Europe: All European Countries +44 (0) 1235 239 670 (NCEC)
Asia Pacific: East / South East Asia – Regional Number +65 3158 1074
Australia +61 2801 44558
New Zealand +64 9929 1483
China +86 532 8388 9090
China Taiwan +86 10 5100 3039
Japan +81 345 789 341
Indonesia 00780 3011 0293
Malaysia +60 3 6207 4347
Thailand 001800 1 2066 6751
Korea +65 3158 1285
+82 (0)234 798 401
17. SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006
SIGNAL
Version
5.2
Revision Date:
14.09.2015
MSDS Number:
400000003975
Country: GB
Language: EN
17 / 17
Vietnam +65 3158 1255
India +65 3158 1198
0800 100 7479
Pakistan +65 3158 1329
Philippines +65 31581203
Sri Lanka +65 3158 1195
Emergency Phone Number +65 3158 1200
Middle East / Africa: Arabic speaking countries +44 (0) 1235 239 671
South Africa +27 21 300 2732
All other countries +44 (0) 1235 239 670
America United States of America and Canada +1866 928 0789
+1 215 207 0061
Latin America: Brazil +55 113 711 9144
Mexico +52 555 004 8763
Chile +56 225 829 336
All other countries +44 (0) 1235 239 670