This safety data sheet provides information on LOCTITE 222 anaerobic adhesive. It lists the product identifier and supplier contact information. The product contains cumene hydroperoxide and other hazardous ingredients. It is classified as causing serious eye irritation and respiratory irritation. Exposure guidelines and personal protective equipment requirements are also outlined, including the need for gloves, safety glasses and adequate ventilation when handling the product.
This safety data sheet provides information on the product LOCTITE 5188. It lists the product identifier, relevant uses and supplier contact information in Section 1. Section 2 identifies the product as a skin, eye and respiratory irritant, and skin sensitizer, which is harmful to aquatic life with long lasting effects. Section 3 provides the composition of the product, listing hazardous components and their classifications. Section 4 outlines first aid measures for potential exposure. Sections 5-7 cover firefighting measures, accidental release measures, and instructions for the safe handling and storage of the product. Section 8 establishes occupational exposure limits. The safety data sheet is intended to ensure the safe use of the product and compliance with regulatory requirements.
LOCTITE LB 8021 is a general purpose, low viscosity silicone oil used for lubricating metal and non-metal surfaces between -30°C and +150°C. It has a clear liquid appearance and 350 mPa·s viscosity. The product is a silicone oil dispersed in a propane/butane propellant and is used to lubricate parts like guides, conveyors and cutting knives. It is also suitable as a mold release agent and has approval for incidental food contact.
This safety data sheet provides information on Loctite 401, an adhesive containing 50-100% ethyl 2-cyanoacrylate. It lists the product identification, composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection for safe use. The sheet identifies skin and eye irritation as well as respiratory irritation as the main health hazards and provides guidance on personal protective equipment.
This technical data sheet provides information on LOCTITE® LB 8201TM, including that it is a universal penetrating liquid that frees, lubricates, cleans, and prevents corrosion on machinery. It can be used to free seized or corroded parts and provides light lubrication. The product is a yellow-brown liquid with properties such as a density of 0.808 to 0.828 g/ml and viscosity of 17.5 cSt at 50°C. Use and storage instructions are also provided.
LOCTITE® 222 is a low strength, thixotropic, acrylic threadlocking adhesive that cures anaerobically. It is designed for locking and sealing threaded fasteners that require easy disassembly with hand tools. The adhesive cures when confined in the absence of air between close fitting metal surfaces and prevents loosening from shock and vibration, particularly suitable for set screws and small diameter fasteners. The product data sheet provides details on typical properties, curing performance, environmental resistance, directions for use, storage, and other technical information.
LOCTITE LB 8040 is a mineral oil formulation that can freeze and instantly crack rust at -43°C, allowing the oil to penetrate rust and lubricate seized metal parts. It sprays onto parts from a pressurized container. When sprayed onto rusted fasteners and allowed to react for 1-2 minutes, the frozen rust cracks and the oil penetrates to free seized parts while leaving them lubricated and protected from corrosion. The product comes in an amber-colored liquid with a density of 0.6 g/ml and viscosity below 5 mPa·s.
LOCTITE® LB 8101TM is an adhesive grease used to lubricate open mechanical systems like chains, gears, screws and cables. It protects against water and wear while resisting high pressures and centrifugal forces. The grease is amber colored with an oily odor, and is sprayed from an aerosol can. It is designed to lubricate parts operating from -30°C to +170°C.
This document provides a safety data sheet for Loctite SuperGlue Gel -454-. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection. The key hazards identified are skin and eye irritation. It contains ethyl 2-cyanoacrylate as the main component and small amounts of hydroquinone and bis(2-hydroxy-3-tert-butyl-5-methylphenyl)methane. Personal protective equipment such as gloves and breathing masks are recommended when handling the product.
This safety data sheet provides information on the product LOCTITE 5188. It lists the product identifier, relevant uses and supplier contact information in Section 1. Section 2 identifies the product as a skin, eye and respiratory irritant, and skin sensitizer, which is harmful to aquatic life with long lasting effects. Section 3 provides the composition of the product, listing hazardous components and their classifications. Section 4 outlines first aid measures for potential exposure. Sections 5-7 cover firefighting measures, accidental release measures, and instructions for the safe handling and storage of the product. Section 8 establishes occupational exposure limits. The safety data sheet is intended to ensure the safe use of the product and compliance with regulatory requirements.
LOCTITE LB 8021 is a general purpose, low viscosity silicone oil used for lubricating metal and non-metal surfaces between -30°C and +150°C. It has a clear liquid appearance and 350 mPa·s viscosity. The product is a silicone oil dispersed in a propane/butane propellant and is used to lubricate parts like guides, conveyors and cutting knives. It is also suitable as a mold release agent and has approval for incidental food contact.
This safety data sheet provides information on Loctite 401, an adhesive containing 50-100% ethyl 2-cyanoacrylate. It lists the product identification, composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection for safe use. The sheet identifies skin and eye irritation as well as respiratory irritation as the main health hazards and provides guidance on personal protective equipment.
This technical data sheet provides information on LOCTITE® LB 8201TM, including that it is a universal penetrating liquid that frees, lubricates, cleans, and prevents corrosion on machinery. It can be used to free seized or corroded parts and provides light lubrication. The product is a yellow-brown liquid with properties such as a density of 0.808 to 0.828 g/ml and viscosity of 17.5 cSt at 50°C. Use and storage instructions are also provided.
LOCTITE® 222 is a low strength, thixotropic, acrylic threadlocking adhesive that cures anaerobically. It is designed for locking and sealing threaded fasteners that require easy disassembly with hand tools. The adhesive cures when confined in the absence of air between close fitting metal surfaces and prevents loosening from shock and vibration, particularly suitable for set screws and small diameter fasteners. The product data sheet provides details on typical properties, curing performance, environmental resistance, directions for use, storage, and other technical information.
LOCTITE LB 8040 is a mineral oil formulation that can freeze and instantly crack rust at -43°C, allowing the oil to penetrate rust and lubricate seized metal parts. It sprays onto parts from a pressurized container. When sprayed onto rusted fasteners and allowed to react for 1-2 minutes, the frozen rust cracks and the oil penetrates to free seized parts while leaving them lubricated and protected from corrosion. The product comes in an amber-colored liquid with a density of 0.6 g/ml and viscosity below 5 mPa·s.
LOCTITE® LB 8101TM is an adhesive grease used to lubricate open mechanical systems like chains, gears, screws and cables. It protects against water and wear while resisting high pressures and centrifugal forces. The grease is amber colored with an oily odor, and is sprayed from an aerosol can. It is designed to lubricate parts operating from -30°C to +170°C.
This document provides a safety data sheet for Loctite SuperGlue Gel -454-. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection. The key hazards identified are skin and eye irritation. It contains ethyl 2-cyanoacrylate as the main component and small amounts of hydroquinone and bis(2-hydroxy-3-tert-butyl-5-methylphenyl)methane. Personal protective equipment such as gloves and breathing masks are recommended when handling the product.
This document is a safety data sheet for Loctite 243 Threadlocker. It provides information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations and regulatory information. The product contains several hazardous components that are classified for skin sensitization, aquatic toxicity, and other hazards. Personal protective equipment including gloves and proper ventilation are recommended when handling the product.
This safety data sheet provides information on Loctite 270 adhesive. It lists the product identifier and supplier contact information in section 1. Section 2 describes the product as causing skin, eye, and respiratory irritation and being a skin sensitizer. The product contains hazardous substances like 3,3,5 trimethylcyclohexyl methacrylate and cumene hydroperoxide that are classified and listed in section 3. Section 4 provides first aid measures for potential exposure.
This safety data sheet provides information on a cleaner product called LOCTITE SF 8040. It lists the product identifier and supplier contact information. The product is not classified as hazardous according to EU regulations. No dangerous ingredients are present above threshold levels. Exposure controls are recommended to include adequate ventilation and personal protective equipment like gloves and goggles should be used. The product information includes physical properties. It is not dangerous for transport.
This technical data sheet provides information on Loctite 454, a cyanoacrylate adhesive. It is a one-part, thixotropic gel adhesive that cures rapidly with humidity. It can bond a variety of substrates including metals, plastics, elastomers, wood, leather, and fabrics. The gel consistency prevents run-off on vertical surfaces. Typical properties include a fixture time of less than one minute for many substrates and tensile strengths up to 15.1 MPa after curing for 72 hours. It also has good chemical and solvent resistance as well as heat resistance. Usage instructions and precautions are provided.
This document provides safety information for the product LOCTITE SF 7855 1,75L EGFD. It identifies the product, manufacturer, relevant uses and safety hazards. The product is a hand cleaner classified as non-hazardous for transport. The document includes sections on product identification, hazards, composition, first aid measures, handling and storage requirements, exposure controls and more. Physical and chemical properties of the product are also detailed.
This safety data sheet provides information on Loctite 7840 cleaner. It identifies the product and company details in section 1. Section 2 determines the product is not hazardous. The product composition is described in section 3, listing the main ingredients and their hazards. First aid measures are outlined in section 4. Firefighting guidance is given in section 5. Instructions are provided for safe handling and storage in sections 7 and 8. Physical and chemical properties are detailed in section 9. Stability and reactivity are covered in sections 10 and 11.
This safety data sheet provides information on LOCTITE LB 8021 400ML EFAT. It identifies the product, supplier contact information, product hazards, and composition. The main hazards are that it is an extremely flammable aerosol and pressurized container that may burst if heated. It contains butane, propane, and pentane. Exposure controls and protective equipment are recommended for handling.
LOCTITE Black Maxx 300 is a one-component, RTV silicone gasket sealant. It has excellent resistance to automotive engine oils and high adhesion strength. It cures at room temperature within 40 minutes to form a flexible, thixotropic paste with a Shore A hardness of 30. The sealant has over 400% elongation and tensile strengths over 1.7 N/mm2 at cure and 0.6-1.0 N/mm2 at 100% elongation. It is packaged in 70ml tubes and has a shelf life of at least one year when stored between 8-21°C.
LOCTITE SF 7200 is an aerosol cleaner designed to aid in the removal of cured chemical gaskets. It works by softening gasket materials on flanges, eliminating excessive scraping. Once applied, it forms a foam layer preventing it from running off while working. It is suitable for removing gaskets from metal flanges, particularly aluminum, without damaging flange surfaces. Typical applications include removing all types of chemical gaskets from metal flanges.
This safety data sheet provides information on Loctite 8201, which is classified as an extremely flammable aerosol. It contains between 25-50% naphtha petroleum and 10-25% butane. The document lists the product identification, hazards, composition, first aid measures, firefighting guidance, handling and storage instructions, exposure controls, physical and chemical properties, stability, toxicological information and other details.
LOCTITE 401 is a one-part cyanoacrylate adhesive that cures rapidly when exposed to moisture in the air. It bonds a variety of materials including wood, paper, leather, fabric, plastics and metals. The adhesive has a low viscosity, cures within seconds to minutes depending on the substrate, and reaches full strength within 24 hours. It is particularly suited for bonding porous materials.
LOCTITE 270 MOD is a one-part, acrylic-based threadlocking adhesive that cures anaerobically. It is green liquid that is particularly suitable for permanently locking and sealing threaded fasteners in heavy-duty applications. The adhesive cures when confined in the absence of air between close-fitting metal surfaces. It provides high strength bonding and prevents loosening from shock and vibration. The technical data sheet provides information on the product's properties, curing performance under different conditions, typical performance of cured material, and environmental resistance.
This document provides a safety data sheet for Loctite 577 PIPE SEALANT 50ML. It lists the product identifier and ingredients, identifies the manufacturer, and provides hazard classification and labeling information. It also includes sections on first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection.
1) The document is a material safety data sheet for Loctite SF 7850 Cleaning, also known as Yuk Off Orange Hand Cleaner.
2) It contains warnings that the product is an irritant and toxic to aquatic life, with safety precautions for use and disposal.
3) The product is an aqueous solution containing less than 10% limonene and over 60% water, and is classified as a hazardous substance but not dangerous goods for transport.
LOCTITE® SF 7039TM is a contact cleaner spray that is colorless and odorless. It contains hydrocarbons and alcohols and uses carbon dioxide as a propellant. It cleans electrical contacts without damaging existing coatings and leaves a water-repellent residue. It is intended to clean contacts exposed to moisture or contamination and works on surfaces from -30°C to 50°C. Directions for use involve shaking the can and spraying from 20-30cm onto the target area.
Oral Long term
exposure -
systemic effects
26 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Dermal Long term
exposure -
systemic effects
319 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Inhalation Long term
exposure -
systemic effects
89 mg/m3
Ethanol
64-17-5
Workers Dermal Long term
exposure -
systemic effects
343 mg/kg bw/day
Ethanol
64-17-5
Workers Inhalation Long term
exposure -
systemic
This safety data sheet provides information on Loctite 8101, which contains pentane, naphtha, butane, and propane. It is classified as an extremely flammable aerosol and pressurized container, and may cause drowsiness or dizziness. Workplace exposure limits and precautions are outlined for safe handling and storage, including keeping away from heat sources, wearing protective gloves and eye protection, and ensuring adequate ventilation. First aid measures are described in case of inhalation, skin, eye or ingestion contact.
This document provides a safety data sheet for Loctite 406 adhesive. It lists the product identifier and supplier contact information in Section 1. Section 2 identifies the product as a skin and eye irritant that may cause respiratory irritation. Section 3 provides the chemical composition, listing ethyl 2-cyanoacrylate as the main component. Section 4 gives first aid measures for inhalation, skin contact, eye contact and ingestion. Section 5 covers firefighting and Section 6 addresses accidental release measures. Sections 7-8 address safe handling, storage, exposure controls and personal protection when working with the product.
This technical data sheet provides information on LOCTITE SF 7840, a concentrated, biodegradable cleaner and degreaser. It is an aqueous-based product that contains no hazardous solvents. It can be diluted with water for cleaning a variety of surfaces and removing substances like grease, oils, food stains and more. Recommended dilution levels vary depending on the application and level of cleaning required, from 1:1 for heavy cleaning to 1:128 for light cleaning. Precautions are noted to avoid using on painted surfaces at low dilutions or where cleaner residues could affect curing of anaerobic products.
LOCTITE® SF 7063TM is a solvent-based cleaner for removing contaminants from surfaces to prepare them for bonding with LOCTITE® adhesives. It has a low viscosity and dries quickly. SF 7063TM cleans without affecting the curing or strength of LOCTITE® adhesives. Proper handling is required due to its flammable nature. Users should test compatibility with plastics before use and allow full drying to prevent solvent entrapment.
This safety data sheet provides information on a cleaner product called LOCTITE SF 7039 400ML. It lists the product identifier and supplier contact information. The product is classified as an aerosol and contains several hazardous components, including hydrocarbons, ethanol, dimethoxymethane, and propan-2-ol. It may cause skin and eye irritation and respiratory effects. Exposure guidelines and precautions for handling and storage are provided. The product contains mixtures that could be hazardous if safety precautions are not followed.
This safety data sheet provides information on the product LOCTITE 574. It lists the product identifier and ingredients, including maleic acid, acetic acid, 2-phenylhydrazide, and N,N'-ethane-1,2-diylbis(12-hydroxyoctadecan-1-amide). It provides guidance on first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
This document is a safety data sheet for Loctite 243 Threadlocker. It provides information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations and regulatory information. The product contains several hazardous components that are classified for skin sensitization, aquatic toxicity, and other hazards. Personal protective equipment including gloves and proper ventilation are recommended when handling the product.
This safety data sheet provides information on Loctite 270 adhesive. It lists the product identifier and supplier contact information in section 1. Section 2 describes the product as causing skin, eye, and respiratory irritation and being a skin sensitizer. The product contains hazardous substances like 3,3,5 trimethylcyclohexyl methacrylate and cumene hydroperoxide that are classified and listed in section 3. Section 4 provides first aid measures for potential exposure.
This safety data sheet provides information on a cleaner product called LOCTITE SF 8040. It lists the product identifier and supplier contact information. The product is not classified as hazardous according to EU regulations. No dangerous ingredients are present above threshold levels. Exposure controls are recommended to include adequate ventilation and personal protective equipment like gloves and goggles should be used. The product information includes physical properties. It is not dangerous for transport.
This technical data sheet provides information on Loctite 454, a cyanoacrylate adhesive. It is a one-part, thixotropic gel adhesive that cures rapidly with humidity. It can bond a variety of substrates including metals, plastics, elastomers, wood, leather, and fabrics. The gel consistency prevents run-off on vertical surfaces. Typical properties include a fixture time of less than one minute for many substrates and tensile strengths up to 15.1 MPa after curing for 72 hours. It also has good chemical and solvent resistance as well as heat resistance. Usage instructions and precautions are provided.
This document provides safety information for the product LOCTITE SF 7855 1,75L EGFD. It identifies the product, manufacturer, relevant uses and safety hazards. The product is a hand cleaner classified as non-hazardous for transport. The document includes sections on product identification, hazards, composition, first aid measures, handling and storage requirements, exposure controls and more. Physical and chemical properties of the product are also detailed.
This safety data sheet provides information on Loctite 7840 cleaner. It identifies the product and company details in section 1. Section 2 determines the product is not hazardous. The product composition is described in section 3, listing the main ingredients and their hazards. First aid measures are outlined in section 4. Firefighting guidance is given in section 5. Instructions are provided for safe handling and storage in sections 7 and 8. Physical and chemical properties are detailed in section 9. Stability and reactivity are covered in sections 10 and 11.
This safety data sheet provides information on LOCTITE LB 8021 400ML EFAT. It identifies the product, supplier contact information, product hazards, and composition. The main hazards are that it is an extremely flammable aerosol and pressurized container that may burst if heated. It contains butane, propane, and pentane. Exposure controls and protective equipment are recommended for handling.
LOCTITE Black Maxx 300 is a one-component, RTV silicone gasket sealant. It has excellent resistance to automotive engine oils and high adhesion strength. It cures at room temperature within 40 minutes to form a flexible, thixotropic paste with a Shore A hardness of 30. The sealant has over 400% elongation and tensile strengths over 1.7 N/mm2 at cure and 0.6-1.0 N/mm2 at 100% elongation. It is packaged in 70ml tubes and has a shelf life of at least one year when stored between 8-21°C.
LOCTITE SF 7200 is an aerosol cleaner designed to aid in the removal of cured chemical gaskets. It works by softening gasket materials on flanges, eliminating excessive scraping. Once applied, it forms a foam layer preventing it from running off while working. It is suitable for removing gaskets from metal flanges, particularly aluminum, without damaging flange surfaces. Typical applications include removing all types of chemical gaskets from metal flanges.
This safety data sheet provides information on Loctite 8201, which is classified as an extremely flammable aerosol. It contains between 25-50% naphtha petroleum and 10-25% butane. The document lists the product identification, hazards, composition, first aid measures, firefighting guidance, handling and storage instructions, exposure controls, physical and chemical properties, stability, toxicological information and other details.
LOCTITE 401 is a one-part cyanoacrylate adhesive that cures rapidly when exposed to moisture in the air. It bonds a variety of materials including wood, paper, leather, fabric, plastics and metals. The adhesive has a low viscosity, cures within seconds to minutes depending on the substrate, and reaches full strength within 24 hours. It is particularly suited for bonding porous materials.
LOCTITE 270 MOD is a one-part, acrylic-based threadlocking adhesive that cures anaerobically. It is green liquid that is particularly suitable for permanently locking and sealing threaded fasteners in heavy-duty applications. The adhesive cures when confined in the absence of air between close-fitting metal surfaces. It provides high strength bonding and prevents loosening from shock and vibration. The technical data sheet provides information on the product's properties, curing performance under different conditions, typical performance of cured material, and environmental resistance.
This document provides a safety data sheet for Loctite 577 PIPE SEALANT 50ML. It lists the product identifier and ingredients, identifies the manufacturer, and provides hazard classification and labeling information. It also includes sections on first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection.
1) The document is a material safety data sheet for Loctite SF 7850 Cleaning, also known as Yuk Off Orange Hand Cleaner.
2) It contains warnings that the product is an irritant and toxic to aquatic life, with safety precautions for use and disposal.
3) The product is an aqueous solution containing less than 10% limonene and over 60% water, and is classified as a hazardous substance but not dangerous goods for transport.
LOCTITE® SF 7039TM is a contact cleaner spray that is colorless and odorless. It contains hydrocarbons and alcohols and uses carbon dioxide as a propellant. It cleans electrical contacts without damaging existing coatings and leaves a water-repellent residue. It is intended to clean contacts exposed to moisture or contamination and works on surfaces from -30°C to 50°C. Directions for use involve shaking the can and spraying from 20-30cm onto the target area.
Oral Long term
exposure -
systemic effects
26 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Dermal Long term
exposure -
systemic effects
319 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Inhalation Long term
exposure -
systemic effects
89 mg/m3
Ethanol
64-17-5
Workers Dermal Long term
exposure -
systemic effects
343 mg/kg bw/day
Ethanol
64-17-5
Workers Inhalation Long term
exposure -
systemic
This safety data sheet provides information on Loctite 8101, which contains pentane, naphtha, butane, and propane. It is classified as an extremely flammable aerosol and pressurized container, and may cause drowsiness or dizziness. Workplace exposure limits and precautions are outlined for safe handling and storage, including keeping away from heat sources, wearing protective gloves and eye protection, and ensuring adequate ventilation. First aid measures are described in case of inhalation, skin, eye or ingestion contact.
This document provides a safety data sheet for Loctite 406 adhesive. It lists the product identifier and supplier contact information in Section 1. Section 2 identifies the product as a skin and eye irritant that may cause respiratory irritation. Section 3 provides the chemical composition, listing ethyl 2-cyanoacrylate as the main component. Section 4 gives first aid measures for inhalation, skin contact, eye contact and ingestion. Section 5 covers firefighting and Section 6 addresses accidental release measures. Sections 7-8 address safe handling, storage, exposure controls and personal protection when working with the product.
This technical data sheet provides information on LOCTITE SF 7840, a concentrated, biodegradable cleaner and degreaser. It is an aqueous-based product that contains no hazardous solvents. It can be diluted with water for cleaning a variety of surfaces and removing substances like grease, oils, food stains and more. Recommended dilution levels vary depending on the application and level of cleaning required, from 1:1 for heavy cleaning to 1:128 for light cleaning. Precautions are noted to avoid using on painted surfaces at low dilutions or where cleaner residues could affect curing of anaerobic products.
LOCTITE® SF 7063TM is a solvent-based cleaner for removing contaminants from surfaces to prepare them for bonding with LOCTITE® adhesives. It has a low viscosity and dries quickly. SF 7063TM cleans without affecting the curing or strength of LOCTITE® adhesives. Proper handling is required due to its flammable nature. Users should test compatibility with plastics before use and allow full drying to prevent solvent entrapment.
This safety data sheet provides information on a cleaner product called LOCTITE SF 7039 400ML. It lists the product identifier and supplier contact information. The product is classified as an aerosol and contains several hazardous components, including hydrocarbons, ethanol, dimethoxymethane, and propan-2-ol. It may cause skin and eye irritation and respiratory effects. Exposure guidelines and precautions for handling and storage are provided. The product contains mixtures that could be hazardous if safety precautions are not followed.
This safety data sheet provides information on the product LOCTITE 574. It lists the product identifier and ingredients, including maleic acid, acetic acid, 2-phenylhydrazide, and N,N'-ethane-1,2-diylbis(12-hydroxyoctadecan-1-amide). It provides guidance on first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
This document provides a safety data sheet for DL-Carnitine hydrochloride. It lists the product identifiers and supplier contact information. The substance is classified as causing skin irritation, eye irritation, and may cause respiratory irritation. Personal protective equipment is recommended when handling the substance, including gloves, eye protection and respiratory protection. The substance should be stored in a dry, cool area and handled according to good industrial hygiene practices.
Caustic Soda Flakes Manufacturers In Dubai | Prakash Chemicals Internationalanshparmar
Prakash Chemicals International is one of the leading manufacturers of caustic soda flakes chemical. To know more about caustic soda flakes, visit our website today.
This document provides a safety data sheet for Loctite 7063, which is a solvent-based cleaner. It contains information on product identification, hazards, composition, first aid measures, firefighting, accidental release measures, handling and storage, exposure controls, and other safety-related details. The main hazardous components are naphtha (hydrotreated light), ethanol, methylal, and carbon dioxide. It is an extremely flammable aerosol that requires precautions to avoid ignition sources and protect from heat.
The document is a technical dossier and declaration of conformity for an electrolyte product called Electrolyte ANTISMOG. It provides information on the manufacturer, product name and description, properties of the product such as toxicity and corrosiveness, and a declaration that the product meets EU standards. The safety data sheet provides additional information on the product such as handling, storage, exposure controls, physical and chemical properties, stability, and toxicity.
This document provides information on chloromethyl pivalate (CAS 18997-19-8), including suppliers, hazards, safe handling and storage, exposure controls, physical and chemical properties, toxicological information, and regulatory information. Chloromethyl pivalate is flammable and harmful if inhaled, swallowed, or absorbed through skin. It causes skin and eye irritation. Proper precautions such as gloves, eye protection and adequate ventilation should be used when handling.
- Nitrous oxide is a liquefied gas that is classified as an oxidizing gas and gas under pressure.
- It requires proper storage and handling to prevent contact with combustible or reducing materials.
- Adverse health effects include central nervous system impairment and hematologic effects with overexposure.
This safety data sheet provides information on the properties and safe handling of tetrahydrofuran. It identifies tetrahydrofuran as a highly flammable liquid that can cause eye and respiratory irritation upon contact. The document lists personal protective equipment requirements and safety precautions for handling and storing tetrahydrofuran. It also provides physical and chemical property data as well as toxicology information.
This safety data sheet provides information on LOCTITE BLACK MAXX 300 TB 70ML, including its composition and safety hazards. It contains silicon compounds, butan-2-one O,O',O'',O'''-silanetetrayltetraoxime, and butanone oxime. Exposure can cause serious eye damage, skin sensitization, and is suspected of causing cancer. The document outlines exposure limits, first aid measures, handling and storage requirements, and other safety information for proper use.
This safety data sheet provides information on Centurion Max, an herbicide product. It identifies the product and supplier, lists hazards such as being fatal if swallowed and causing drowsiness, and provides guidance on handling and storage. The document contains sections regarding composition, first aid measures, fire fighting, accidental release measures, exposure controls, physical properties, stability and reactivity, toxicological information, ecological information, and regulatory information.
Valeo Braking Systems Hydraulic Mineral Fluid LHM standard material safety da...Hugo Vallet
Valeo Braking Systems Hydraulic Mineral Fluid LHM standard material safety data sheet 402410 402411
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID LHM
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document provides a material safety data sheet for dipyridamole (CAS 58-32-2). It lists dipyridamole's hazards, including skin and eye irritation, and recommends protective equipment when handling. The document describes dipyridamole's physical properties, toxicity, and disposal considerations. It contains safety information for transportation and regulatory compliance.
Benzamide,2,6-difluoro- (cas 18063-03-1) MSDS provides information on the product including identification, hazards, composition, safe handling and storage, exposure controls, accidental release measures, physical and chemical properties, toxicity, ecological information, and regulatory information. The document indicates the product may cause skin, eye and respiratory irritation upon contact or inhalation and is harmful if inhaled. Proper protective equipment should be used when handling the product.
This document provides a material safety data sheet for 4-Bromopyridine hydrochloride (CAS 19524-06-2). It lists the product's identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information. The product is harmful if swallowed, a skin and eye irritant, and may cause respiratory irritation.
Hals 292 tinuvin 292 cas 41556 26-7 cas 82919-37-7 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides a safety data sheet for Pigment Green 50, an inorganic pigment. It identifies hazards such as skin sensitization, carcinogenicity, and specific target organ toxicity from repeated inhalation exposure. It provides details on product identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
The document introduces new product lines and accessories for Ledlenser's H-series and P-series headlamps. It describes three variants for each series - Core, Work, and Signature - with varying features and price points. A new connecting system allows the lamps to be used with a wide range of accessories like mounts, filters, protective sleeves, charging stations, and carrying cases. Technical specifications are provided for each lamp variant.
This document provides information about laser distance measurers from Stabila, including specifications for five models: LD 220, LD 250 BT, LD 320, LD 420, and LD 520. It summarizes the key features of each model such as measurement distance and accuracy, included accessories, and intended uses. The document also includes guidance on factors to consider when selecting a laser distance measurer, like measurement environment and needed functions.
This document provides information on mechanical pullers and extractors made by NEXUS-Werkzeugfabrik. It includes safety rules and directions for using pullers, as well as decision criteria for identifying a suitable puller. The document also lists various puller models and specifications, and outlines capacities and torque limits not to be exceeded for safety.
This document is a 2018 product catalogue for Lenoxtools that includes power tool accessories and hand tools. It provides an overview of Lenoxtools' 100-year history and commitment to producing high-quality cutting tools. The catalogue then lists and describes the various power tool accessories and hand tools that Lenoxtools offers for sale.
This technical data sheet provides information on LOCTITE® SF 7850TM, a natural hand cleaner containing d-limonene from oranges. It is an off-white, viscous lotion that cleans hands without water by dissolving dirt and grease. In addition to d-limonene, it contains aloe vera, lanolin, and jojoba oil for skin conditioning and extra fine abrasives that clean deep in the pores. The data sheet provides instructions for use and storage information.
LOCTITE® SF 7855TM is a heavy-duty hand cleaner formulated to remove difficult soils like paints and adhesives. It contains skin conditioning agents like aloe vera and vitamins to moisturize hands. The product has a citrus scent and fine abrasives that aid cleaning without affecting skin with frequent use. Directions instruct to dispense onto dry hands and rub until dirt dissolves, then wipe or rinse clean.
LOCTITE® 5188TM is a one-part, acrylic-based anaerobic sealant that cures in the absence of air between close-fitting metal surfaces. It is designed for sealing rigid metal flanged connections, especially those exposed to minor oil contamination. It cures quickly and develops handling strength within 30 minutes, with full strength achieved after 72 hours. The sealant remains flexible even after exposure to high temperatures and has good adhesion to metals like steel and aluminum. It can seal gaps up to 0.25mm and resist pressures immediately after application while uncured.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Efficient PHP Development Solutions for Dynamic Web ApplicationsHarwinder Singh
Unlock the full potential of your web projects with our expert PHP development solutions. From robust backend systems to dynamic front-end interfaces, we deliver scalable, secure, and high-performance applications tailored to your needs. Trust our skilled team to transform your ideas into reality with custom PHP programming, ensuring seamless functionality and a superior user experience.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...YourLegal Accounting
Effective financial management is important for expansion and scalability in the ever-changing US business environment. White Label Bookkeeping services is an innovative solution that is becoming more and more popular among businesses. These services provide a special method for managing financial duties effectively, freeing up companies to concentrate on their main operations and growth plans. We’ll look at how White Label Bookkeeping can help US firms expand and develop in this blog.
High-Quality IPTV Monthly Subscription for $15advik4387
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
The Steadfast and Reliable Bull: Taurus Zodiac Signmy Pandit
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Loctite 222 msds
1. Safety Data Sheet according to Regulation (EC) No 1907/2006
Page 1 of 13
LOCTITE 222
SDS No. : 168430
V006.0
Revision: 24.07.2018
printing date: 08.01.2019
Replaces version from: 05.09.2016
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
LOCTITE 222
1.2. Relevant identified uses of the substance or mixture and uses advised against
Intended use:
Anaerobic Adhesive
1.3. Details of the supplier of the safety data sheet
Henkel Ltd
Wood Lane End
HP2 4RQ Hemel Hempstead
Great Britain
Phone: +44 1442 278000
Fax-no.: +44 1442 278071
ua-productsafety.uk@henkel.com
1.4. Emergency telephone number
24 Hours Emergency Tel: +44 (0)1442 278497
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification (CLP):
Serious eye irritation Category 2
H319 Causes serious eye irritation.
Specific target organ toxicity - single exposure Category 3
H335 May cause respiratory irritation.
Target organ: respiratory tract irritation
2.2. Label elements
Label elements (CLP):
Hazard pictogram:
Contains Cumene hydroperoxide
Signal word: Warning
2. SDS No.: 168430 V006.0 LOCTITE 222 Page 2 of 13
Hazard statement: H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement: "***" ***For consumer use only: P101 If medical advice is needed, have product
container or label at hand. P102 Keep out of reach of children. P501 Dispose of waste and
residues in accordance with local authority requirements***
Precautionary statement:
Prevention
P261 Avoid breathing vapors.
Precautionary statement:
Response
P337+P313 If eye irritation persists: Get medical advice/attention.
2.3. Other hazards
None if used properly.
Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
General chemical description:
Product based on polyethylene glycol dimethacrylate.
3. SDS No.: 168430 V006.0 LOCTITE 222 Page 3 of 13
Declaration of the ingredients according to CLP (EC) No 1272/2008:
Hazardous components
CAS-No.
EC Number
REACH-Reg No.
content Classification
Cumene hydroperoxide
80-15-9
201-254-7 0,25- < 2,5 % Acute Tox. 4; Dermal
H312
STOT RE 2
H373
Acute Tox. 4; Oral
H302
Org. Perox. E
H242
Acute Tox. 3; Inhalation
H331
Aquatic Chronic 2
H411
Skin Corr. 1B
H314
N,N-Diethyl-p-toluidine
613-48-9
210-345-0 0,1- < 1 % Acute Tox. 3; Oral
H301
Acute Tox. 3; Dermal
H311
Acute Tox. 3; Inhalation
H331
STOT RE 2
H373
Aquatic Chronic 3
H412
1,4-Naphthalenedione
130-15-4
204-977-6 0,01- < 0,025 %
( 100 ppm- < 250
ppm)
Acute Tox. 3; Oral
H301
Skin Irrit. 2; Dermal
H315
Skin Sens. 1; Dermal
H317
Eye Irrit. 2
H319
Acute Tox. 1; Inhalation
H330
STOT SE 3; Inhalation
H335
Aquatic Acute 1
H400
Aquatic Chronic 1
H410
M factor (Acute Aquat Tox): 10 M factor
(Chron Aquat Tox): 10
For full text of the H - statements and other abbreviations see section 16 "Other information".
Substances without classification may have community workplace exposure limits available.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Should not be a problem as product is of low volatility. However, if feeling unwell remove patient to fresh air.
Skin contact:
Rinse with running water and soap.
Obtain medical attention if irritation persists.
Eye contact:
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Ingestion:
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
4. SDS No.: 168430 V006.0 LOCTITE 222 Page 4 of 13
4.2. Most important symptoms and effects, both acute and delayed
EYE: Irritation, conjunctivitis.
RESPIRATORY: Irritation, coughing, shortness of breath, chest tightness.
Prolonged or repeated contact may cause skin irritation.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media:
Foam, extinguishing powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
None known
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
5.3. Advice for firefighters
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Additional information:
In case of fire, keep containers cool with water spray.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Avoid contact with skin and eyes.
Wear protective equipment.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Use only in well-ventilated areas.
Gloves and safety glasses should be worn
Avoid skin and eye contact.
Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation.
See advice in section 8
Hygiene measures:
Good industrial hygiene practices should be observed.
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Refer to Technical Data Sheet
5. SDS No.: 168430 V006.0 LOCTITE 222 Page 5 of 13
7.3. Specific end use(s)
Anaerobic Adhesive
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Great Britain
Ingredient [Regulated substance] ppm mg/m3
Value type Short term exposure limit
category / Remarks
Regulatory list
Propane-1,2-diol
57-55-6
[PROPANE-1,2-DIOL, PARTICULATES]
10 Time Weighted Average
(TWA):
EH40 WEL
Propane-1,2-diol
57-55-6
[PROPANE-1,2-DIOL, TOTAL VAPOUR
AND PARTICULATES]
150 474 Time Weighted Average
(TWA):
EH40 WEL
Occupational Exposure Limits
Valid for
Ireland
Ingredient [Regulated substance] ppm mg/m3
Value type Short term exposure limit
category / Remarks
Regulatory list
Propane-1,2-diol
57-55-6
[PROPANE-1,2-DIOL, PARTICULATES]
10 Time Weighted Average
(TWA):
IR_OEL
Propane-1,2-diol
57-55-6
[PROPANE-1,2-DIOL, TOTAL (VAPOUR
AND PARTICULATES)]
150 470 Time Weighted Average
(TWA):
IR_OEL
6. SDS No.: 168430 V006.0 LOCTITE 222 Page 6 of 13
Predicted No-Effect Concentration (PNEC):
Name on list Environmental
Compartment
Exposure
period
Value Remarks
mg/l ppm mg/kg others
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
aqua
(freshwater)
0,0031
mg/l
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
aqua (marine
water)
0,00031
mg/l
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
aqua
(intermittent
releases)
0,031 mg/l
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
Sewage
treatment plant
0,35 mg/l
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
sediment
(freshwater)
0,023
mg/kg
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
sediment
(marine water)
0,0023
mg/kg
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
soil 0,0029
mg/kg
Predicted No-Effect Concentration (PNEC):
Name on list Environmental
Compartment
Exposure
period
Value Remarks
mg/l ppm mg/kg others
Derived No-Effect Level (DNEL):
Name on list Application
Area
Route of
Exposure
Health Effect Exposure
Time
Value Remarks
.alpha.,.alpha.-Dimethylbenzyl
hydroperoxide
80-15-9
Workers inhalation Long term
exposure -
systemic effects
6 mg/m3
Derived No-Effect Level (DNEL):
Name on list Application
Area
Route of
Exposure
Health Effect Exposure
Time
Value Remarks
Biological Exposure Indices:
None
8.2. Exposure controls:
Engineering controls:
Ensure good ventilation/extraction.
Respiratory protection:
Ensure adequate ventilation.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly
ventilated area
Filter type: A (EN 14387)
7. SDS No.: 168430 V006.0 LOCTITE 222 Page 7 of 13
Hand protection:
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes
permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time
as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy
with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably
shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.
temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Eye protection:
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing.
Protective eye equipment should conform to EN166.
Skin protection:
Wear suitable protective clothing.
Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Advices to personal protection equipment:
The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be
conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions.
Personal protective equipment should conform to the relevant EN standard.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance liquid
purple
Odor characteristic
Odour threshold No data available / Not applicable
pH
()
3,00 - 6,00
Melting point No data available / Not applicable
Solidification temperature No data available / Not applicable
Initial boiling point > 150 °C (> 302 °F)
Flash point > 100 °C (> 212 °F)
Evaporation rate No data available / Not applicable
Flammability No data available / Not applicable
Explosive limits No data available / Not applicable
Vapour pressure
(25 °C (77 °F))
< 0,1300000 mbar
Vapour pressure
(50 °C (122 °F))
< 300 mbar
Relative vapour density: No data available / Not applicable
Density
()
1,08 g/cm3
Bulk density No data available / Not applicable
Solubility No data available / Not applicable
Solubility (qualitative)
(Solvent: Water)
Slight
Solubility (qualitative)
(Solvent: Acetone)
Miscible
Partition coefficient: n-octanol/water No data available / Not applicable
Auto-ignition temperature No data available / Not applicable
Decomposition temperature No data available / Not applicable
Viscosity No data available / Not applicable
Viscosity (kinematic) No data available / Not applicable
Explosive properties No data available / Not applicable
Oxidising properties No data available / Not applicable
8. SDS No.: 168430 V006.0 LOCTITE 222 Page 8 of 13
9.2. Other information
No data available / Not applicable
SECTION 10: Stability and reactivity
10.1. Reactivity
Peroxides.
10.2. Chemical stability
Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
See section reactivity
10.4. Conditions to avoid
Stable under normal conditions of storage and use.
10.5. Incompatible materials
See section reactivity.
10.6. Hazardous decomposition products
Oxides of carbon.
SECTION 11: Toxicological information
General toxicological information:
Prolonged or repeated contact may cause skin irritation.
11.1. Information on toxicological effects
Acute oral toxicity:
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Species Method
Cumene hydroperoxide
80-15-9
LD50 550 mg/kg rat not specified
1,4-Naphthalenedione
130-15-4
LD50 190 mg/kg rat not specified
Acute dermal toxicity:
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Species Method
Cumene hydroperoxide
80-15-9
LD50 1.200 - 1.520
mg/kg
not specified
Acute inhalative toxicity:
No data available.
Skin corrosion/irritation:
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Result Exposure
time
Species Method
Cumene hydroperoxide
80-15-9
corrosive rabbit Draize Test
9. SDS No.: 168430 V006.0 LOCTITE 222 Page 9 of 13
Serious eye damage/irritation:
No data available.
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
The mixture is classified based on threshold limits referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Result Type of study /
Route of
administration
Metabolic
activation /
Exposure time
Species Method
Cumene hydroperoxide
80-15-9
positive bacterial reverse
mutation assay (e.g
Ames test)
without OECD Guideline 471
(Bacterial Reverse Mutation
Assay)
Carcinogenicity
No data available.
Reproductive toxicity:
No data available.
STOT-single exposure:
No data available.
STOT-repeated exposure::
The mixture is classified based on threshold limits referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Result / Value Route of
application
Exposure time /
Frequency of
treatment
Species Method
Cumene hydroperoxide
80-15-9
inhalation:
aerosol
6 h/d
5 d/w
rat not specified
Aspiration hazard:
No data available.
10. SDS No.: 168430 V006.0 LOCTITE 222 Page 10 of 13
SECTION 12: Ecological information
General ecological information:
Do not empty into drains / surface water / ground water.
12.1. Toxicity
Toxicity (Fish):
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Exposure time Species Method
Cumene hydroperoxide
80-15-9
LC50 3,9 mg/l 96 h Oncorhynchus mykiss OECD Guideline 203 (Fish,
Acute Toxicity Test)
Toxicity (Daphnia):
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Exposure time Species Method
Cumene hydroperoxide
80-15-9
EC50 18 mg/l 48 h Daphnia magna OECD Guideline 202
(Daphnia sp. Acute
Immobilisation Test)
Chronic toxicity to aquatic invertebrates
No data available.
Toxicity (Algae):
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Exposure time Species Method
Cumene hydroperoxide
80-15-9
ErC50 3,1 mg/l 72 h Pseudokirchneriella subcapitata OECD Guideline 201 (Alga,
Growth Inhibition Test)
1,4-Naphthalenedione
130-15-4
EC50 0,011 mg/l 72 h Dunaliella bioculata OECD Guideline 201 (Alga,
Growth Inhibition Test)
Toxicity to microorganisms
The mixture is classified based on calculation method referring to the classified substances present in the mixture.
Hazardous substances
CAS-No.
Value
type
Value Exposure time Species Method
Cumene hydroperoxide
80-15-9
EC10 70 mg/l 30 min not specified
12.2. Persistence and degradability
No data available for the product.
Hazardous substances
CAS-No.
Result Test type Degradability Exposure
time
Method
Cumene hydroperoxide
80-15-9
no data 0 % 28 d OECD Guideline 301 B (Ready
Biodegradability: CO2 Evolution
Test)
1,4-Naphthalenedione
130-15-4
no data 0 - 60 % OECD 301 A - F
12.3. Bioaccumulative potential
No data available.
11. SDS No.: 168430 V006.0 LOCTITE 222 Page 11 of 13
Hazardous substances
CAS-No.
Bioconcentratio
n factor (BCF)
Exposure time Temperature Species Method
Cumene hydroperoxide
80-15-9
9,1 calculation OECD Guideline 305
(Bioconcentration: Flow-through
Fish Test)
Hazardous substances
CAS-No.
Bioconcentratio
n factor (BCF)
Exposure time Temperature Species Method
12.4. Mobility in soil
Cured adhesives are immobile.
Hazardous substances
CAS-No.
LogPow Temperature Method
Cumene hydroperoxide
80-15-9
2,16 not specified
1,4-Naphthalenedione
130-15-4
1,71 not specified
Hazardous substances
CAS-No.
LogPow Temperature Method
12.5. Results of PBT and vPvB assessment
Hazardous substances
CAS-No.
PBT / vPvB
Cumene hydroperoxide
80-15-9
Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very
Bioaccumulative (vPvB) criteria.
1,4-Naphthalenedione
130-15-4
Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very
Bioaccumulative (vPvB) criteria.
12.6. Other adverse effects
No data available.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Product disposal:
Dispose of in accordance with local and national regulations.
Contribution of this product to waste is very insignificant in comparison to article in which it is used
Disposal of uncleaned packages:
After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an
authorised legal land fill site or incinerated.
Disposal must be made according to official regulations.
Waste code
08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances
The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes
for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users. We
will be happy to advise you.
12. SDS No.: 168430 V006.0 LOCTITE 222 Page 12 of 13
SECTION 14: Transport information
14.1. UN number
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.2. UN proper shipping name
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.3. Transport hazard class(es)
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.4. Packing group
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.5. Environmental hazards
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.6. Special precautions for user
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
VOC content
(2010/75/EC)
< 3 %
15.2. Chemical safety assessment
A chemical safety assessment has not been carried out.
13. SDS No.: 168430 V006.0 LOCTITE 222 Page 13 of 13
SECTION 16: Other information
The labelling of the product is indicated in Section 2. The full text
of all abbreviations indicated by codes in this safety data sheet are as follows:
H242 Heating may cause a fire.
H301 Toxic if swallowed.
H302 Harmful if swallowed.
H311 Toxic in contact with skin.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
H331 Toxic if inhaled.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
Further information:
This Safety Data Sheet has been produced for sales from Henkel to parties purchasing from Henkel, is based on Regulation
(EC) No 1907/2006 and provides information in accordance with applicable regulations of the European Union only. In that
respect, no statement, warranty or representation of any kind is given as to compliance with any statutory laws or regulations
of any other jurisdiction or territory other than the European Union. When exporting to territories other than the European
Union, please consult with the respective Safety Data Sheet of the concerned territory to ensure compliance or liaise with
Henkel´s Product Safety and Regulatory Affairs Department (ua-productsafety.de@henkel.com) prior to export to other
territories than the European Union.
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is
intended to describe our products from the point of view of safety requirements and is not intended to guarantee any
particular properties.
Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document.
Corresponding text is displayed in a different color on shadowed fields.