Akash J. Vora is a structural engineer with 2 years of experience in oil and gas and solar design engineering. He has expertise in structural analysis and design of pipe racks, equipment foundations, solar structures, and more using software like STAAD and AutoCAD. Some of his projects include designing fixed and rotating solar tracker systems, an ETP plant module structure, and special pipe support structures for projects in Russia and the US.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
Solar tracking system, Full Report Submitted in B.Tech, Electrical & Electronics Engineering Final Year @ College of Engineering Roorkee-247667, Uttarakhand, INDIA.
Engineering consultancy in India offering engineering and documentation services for Power plants, Refineries, Pipelines, Skids, Chemicals, Fertilizers, Steel, Cement industries, Material handling systems etc
ProSIM has been providing engineering design, and R&D services to OEMs, Operators, EPC contractors, System Integrators and vendors of nuclear power sector. ProSIM has assisted in the design and seismic evaluation/ analysis of systems, structures and components (SSCs) of nuclear power plants (NPP). Driven by its competence and focus on quality and project management processes, ProSIM has delivered value to its customers. ProSIM has interacted with regulatory bodies and code committees related to nuclear design codes. Methodologies for seismic analysis of mechanical equipment (rotary and static), electrical engineering, instrumentation and control, and structures have been developed by ProSIM using ASME boiler and pressure vessel (B&PV), RCC, IEEE, ASCE and similar codes. Several hundreds of reports of seismic analysis/ evaluation submitted by ProSIM have been approved by the operators or regulatory bodies. ProSIM has taken up several detailed engineering projects. Worked on design optimisation of structures/ equipment, pipelines, supports etc. ProSIM has also supported seismic qualification of equipment/ systems by physical testing by coordinating with agencies.
In addition to the seismic analysis during engineering stage for structural integrity assessment, ProSIM has worked on seismic margin assessment, seismic re-evaluation, fitness for service (FFS), remaining life assessment and extension (RLA/RLE), and failure analysis.
1. Akash J. Vora
Structural Engineer
Resume
Page 1
SUMMARY
Structural Engineer with 2 year of experience, having specialization in Oil & Gas design engineering.&
solar sectore.Excellent knowledge of structural engineering aided with software skills.
Technical skills:
Analysis & Design:
Pipe support Structures, Pipe Racks, Stack, Condensate tank & Equipment supporting structure
Connection Design, Detail Drawings & 3D modeling
Equipment foundation and building design
Topside Modules & Fixed Structures
Inplace, Lift , Transportation & Load out Analysis
Solar Structure design
International codes & Specifications:
API RP2A WSD 21st edition , AISC-ASD 9th addition, AISC-LRFD 2005, IS Standards, BS-EN
2005
Computer skills:
SACS 5.2, SAP2000 Advanced , STAAD PRO V8iSS5, AutoCAD2013, MathCAD,Microstation
EXPERIENCE
2015 - Present Structural Engineer, EiEn Engineering, Vadodara
Project – Design of fixed and rotating solar tracker system & pile foundation design, HPU
foundation at located at Hyderabad
Client – Insolare Energy Private Limited
Main Client – Infosys
Design of fixed structure using aluminum code US code and IS8147
Design of rotating structure using IS800 code
Design of pile foundation design, HPU foundation & solar tracker system, preparation of
analysis report, detail drawing and MTO of foundation work
Analysis using STAAD software
Site and client coordination & Geotechnical service
Project – Design of ETP plant Module structure design, Ghana
Design of module steel structure and analysis as per European code BS-EN1993 2005
(LRFD)
Analysis using STAAD software
Civil design & analysis and preparation of civil drawings
MTO preparation ,analysis report
2. Akash J. Vora
Structural Engineer
Resume
Page 2
Project – Design of pile foundation design, HPU foundation & solar tracker system at located
at Gajod, Kutch-Bhuj
Client – Insolare Energy Private Limited
Main Client – International Marketing Corporation
Design of pile foundation design, HPU foundation & solar tracker system, preparation of
analysis report, detail drawing and MTO of foundation work
Analysis using STAAD software
Site & client coordination & Geotechnical service
Project –Design of Special pipe support structures (SPS) – TOBOLSK_02, Russia (Ethylene
cracker)
Client – Linde Engineering India Pvt.Ltd, Main client – Sibur
Design and analysis (STAAD PRO software) of Special pipe support structures as per
European code BS-EN1993 2005 (LRFD)
Connection design, MTO & analysis reports
Detail engineering drawings
Client coordination and technical meeting
2014 – Projects
Project –Design of Special pipe support structures (SPS) – Baytown, USA (Ethylene cracker)
Client – Linde Engineering India Pvt.Ltd, Main client - Shell
Design and analysis (STAAD PRO software) of Special pipe support structures as per
American code AISC360 LRFD-2005(LRFD)
Connection design & analysis reports
Project –Design of Special pipe support structures (SPS) - (OGBL Complex AGR Physical Shift
& Unshift, J3 PROGRAM JAMNAGAR, Reliance Industries Limited)
Client – Linde Engineering India Pvt.Ltd, Main client - RIL
Design and analysis (STAAD PRO software) of Special pipe support structures as per
Indian code IS-800(LRFD)
Connection design spreadsheet & Analysis report
Detail engineering drawings and MTO
Project – Condensate tank Design - located at Hazira and Dahej, Coal-Based Captive Power
Plant (CCPP) , Reliance Industries Limited
Client – Bilfinger Neo Structo Private Limited, Main client - RIL
Preliminary Structural Design calculation, Operating condition design and analysis
(SAP2000) report complying with API650 and IS803
GA (General Arrangement) drawing, Nozzle arrangement, Plate assembly, MTO
Project – Stack Design - J3 PROGRAM JAMNAGR, Reliance Industries Limited
Carried out the proposal engineering and preliminary design
3. Akash J. Vora
Structural Engineer
Resume
Page 3
Dynamic analysis, wind response, thickness calculation and submission of the technical
and commercial proposal
Concept selection drawings and calculation reports
Code Used – IS, AISC and ISO standards
Project – Stack Design LEI India Pvt. Ltd.
Proposal engineering and preliminary design of Stack located in Jamnagar
Dynamic analysis, wind response, thickness calculation and submission of the technical
and commercial proposal to client
Concept selection drawings and calculation reports
Code & Standards – IS800.IS875, API560
Project – Preliminary design of Pipe-rack structure
Analysis and design of pipe-rack, framing arrangement, MTO and feasibility design report.
Connection design and preliminary framing drawing
Code and Standards - AISC ASD 13
th
edition and API RP2A 20
th
edition
Project – Analysis of Gangway
Structural Analysis Perform for in-place & lift Analysis using SAP2000
Development of MTO, weight control report, detail design report and connection design
checks
Code & Standards- AISC ASD 13
th
edition, API RP2A 20
th
edition and IS800 standards
Project –Access platform Analysis
In-place and lift analysis of the platforms
Development of MTO, weight control report, detail design report and framing arrangement
drawings
Code & Standards- AISC ASD 13
th
edition, API RP2A 20
th
edition
EDUCATION
Bachelor of Civil Engineering, Birla vishvakarma Mahavidhyalaya, Anand India, 2013.
SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES
Certificate for AutoCAD 2D &3D course Completion.
STAAD PRO course Completion.
CONTACT DETAILS
Email Id – akashvora76@gmail.com
Mobile: +91-7405069950
Address – 76, Parimal Society,
B/H Bhagirath Society,
L.H.road, Surat-6.