This curriculum vitae outlines Anil Kumar Chindam's experience as a structural draftsman and designer. He has over 12 years of experience in 3D modeling, detailed drawings, and fabrication of structures for oil and gas projects. Currently, he works for NPCC in Abu Dhabi on subsea cable and pipeline projects. Previously, he held roles with various engineering companies in India and the Middle East, gaining experience modeling and detailing structures like offshore platforms, pipelines, and refineries. He is proficient in software like Tekla, BOCAD, AutoCAD, and has extensive experience preparing shop drawings, nesting drawings, and fabrication sequences.

1. - 1 -
CURRICULUM VITAE
Anil Kumar Chindam
Phone- :00971-553286502/Abudhabi (U.A.E)
e-mail :anilchinnam@gmail.com
CurrentLocation :Abudhabi(U.A.E)
Career Objective:
Particularly interested in finding a position, that would offer avenues to prove my achievements.
Profile Summary: 12years of Total Experience in Steel Detailed drawings of Civil & Structural discipline. 3D
Modeling, Preparation and checking of General Arrangement and Fabrication drawings for Oil & Gas, Commercial
& Industrial Structures (Off shore and On shore).
3 Years of experiencein KakatiIndia Pvt Ltd,Hyderabad,Worked asa QC engineer.
Technical skills:Proficient in different computer software like
>BOCAD (3D &2D)
> TEKLA STRUCTURE (3D&2D)
>AutoCAD (2D)
>Basic Knowledge on PDMS
Work experience:
>Current experience<
Sep’2014-Present NPCC,AbuDhabi, U.A.E.
ProjectName : UMMLULU PHASE-II,UZ750K SUB-SEA CABLES&PIPE LINES
Client : ZADCO& ADMA,Technip
Role : SeniorStructuralDraftsman
SoftwareEnvironment : Tekla & AutoCAD.
My roles and responsibilitiesin these projectsareto 3D modelin TEKLA such asJackets,Well head platforms,
Processplatforms,Bridgesetc.(Green field & Brown Field) & and extracting 2D General arrangementand
shop/fabrication drawings.Preparing technicalquerieson design drawings
L&T ModularFabricationYardLLC Sohar,Sultanateof Oman.A JointVenturewith TheZubair Corporation of
Oman: Worked as Sr. Structuraldesignerfrom sep-2011 to AUG-2014 .
Client : ADMA OPCO (Abu Dhabi Marine Operating Company)
Project-1 : NASR PHASE-I Full field development (Three Wellhead Tower 01, 02 and
Manifold Tower)
Project-2 : UMM LULU PHASE-I Full field development (Two Wellhead Tower 04 and 06)
Client : PTTEP International limited (Thailand)
Project : Zawtika Development Project Phase-1A, (EPCIC of Zawtika Wellhead Platforms 1, 2 and 3,
with sea lines)

2. - 2 -
 Tasked in 3D modeling and detailed shop drawing preparation of Jacket and Appurtenances (Boat
landing arrangement, Riser protector arrangement, Jacket conductor protector arrangement),Piles,
Load out arrangement, Riser, Conductor guide details, Grout plug system, Crown shim plate, J-tube
arrangement,Jacketwalkway,Handrails,Stairs,Ladders,Pad eye,Mud mat,riserand conductorclamps
details .
 Tasked in 3D modeling and preparation of shop drawings for deck various levels and elevation
drawings, Equipment support details,flare boom,
 Extraction of Assembly and Part sheets by using BOCAD and AutoCAD.
 Preparation of cutting sheet/Nesting sheet for Tubular, I-section, and Plates for optimum utilization of
Material.
 Calculation of MTO.
 Calculation of COG in BOCAD.
 Extraction of Development drawings for Tubular profiles by using BOCAD.
 Preparation of Fabrication sequence details.
 To co-ordinate with Fabrication Yard and resolving queries from Shop.
 Preparation of Program for Tubular profile cutting in CNC (HGG Machine).
>Previous experience<
1. Nauvata Engineering (P).Ltd, Bangalore, Karnataka, India.
Worked as a Structural Designer from June-2010 to Aug-2011
Client : ONGC (Oil & NaturalGas Corporation) Mumbai.
Project : B-193 Well Head Platform(covered fiveModulesB-23A-A,B-28A-A,B-172A,
B-178A & B179A)
 Tasked in 3D modeling and detailed shop drawing preparation of Jacket and Appurtenances (Boat
landing arrangement, Riser protector arrangement, Jacket conductor protector arrangement),Piles,
Load out arrangement, Riser, Conductor guide details, Grout plug system, Crown shim plate, J-tube
arrangement,Jacketwalkway,Handrails,Stairs,Ladders,Pad eye,Mud mat,riserand conductorclamps
details .
 Preparation of cutting sheet/Nesting sheet for Tubular, I-section, and Plates for optimum utilization of
Material.
 Calculation of MTO.
 Calculation of COG in BOCAD.
 Extraction of Development drawings for Tubular profiles by using BOCAD.
 Preparation of Fabrication sequence details.
2.Convese Technologies Pvt Ltd.Hyderabad, Andhrapradesh, India
Worked as a Structural Designer fromApril-2008to June-2010
Client : Qatar Petroleum Co.(ConsolidatedGulfCo,Qatar.)
Project : NGL-3,NGL-4 and GDS areasAs Built.
 Developing REALTY LINX models for the Projects and coordination with all disciplines Piping,
Equipment & Electrical departments.
 Study of the drawing during the pre-project stage.
 Exporting the Reality Linx models in AutoCAD and Micro station.
 REALTY LINX Modeling for all Disciplines including project administration
 GAD creation by using Auto plant
 Auto plant 3D Model cross checking w.r.t Laser Scans by using LFM
 Project and Users Creation in Reality Linx.
 Access creation for user ids for projects.

3. - 3 -
Client : YongnamEngineeringPvt. Singapore.
Project : Arts & Science Museum,ChangiAirportTerminal1,Hotel Skypark
Client : Rotary EngineeringLimited.
Project : Shell BukomRefinery Modification project,Singapore
 Members and connection modeling using Tekla Structures.
 Customization of Templates and Reports.
 Involved in Tekla Administration, Troubleshooting& Training.
 Preparation of General Arrangement drawings for the Foundation plans as per Design data.
 Preparation of Column layouts, General Arrangement drawings for the Super structure.
 Structural Modeling of various structures viz., Piperack, Super structures, Platforms, Ladders etc.,
 Interference checking of Structures with other equipment& piping.
3.Avineon India Pvt LtdPvt Ltd. Hyderabad, Andhrapradesh, India
Worked as a Structural Designer from June-2003 to April-2008
Client : M/s PETRONASCARIGALISDN.BHD
Project :Turkmenistan block1 Gas developmentProject – 01 MagtymgulyCollectorRiserPlatformA
(MMHE)
Client : Reliance EngineeringLimited,India.
Project : JamnagarExportRefinery Project.
: KG-D6 Block Field DevelopmentProject.
 Customization of Templates and Reports.
 Involved in Bocad Administration, Troubleshooting& Training.
 Preparation of General Arrangement drawings for the Foundation plans as per Design data.
 Preparation of Flare boom, General Arrangement drawings for the Super structure.
 Structural Modeling of various structures viz., Piperack, Super structures, Platforms, Ladders etc.,
 Preparation of GA, Shop drawing, Nesting drawing for all Structural Members.
 Detailing of Plate Girders, Universal Beams, Ladders, Stair Cases, Platforms, Handrails, Flare boom
and Columns. Etc.
QUALIFICATIONS:
 Diploma in MechanicalEngineering.
PERSONAL PROFILE:
Name : CH.ANILKUMAR
Fathername : CH.MAHIPAL
Date of birth : 9-May-1979
Marital status : MARRIED
Languageknown : English,Hindi, Telugu
Permanentaddress : H.no:12-13-180, Tarnaka, Secunderabad,( A.P.) ,Pin.500017.
PassportNumber/ : J6339559
Expiry date : 03/07/2021
(Anil Kumar CH)