2. SERVO-s Ventilator System Product End-of-Life Disassembly Instructions
Important
• The SERVO-s Ventilator System is a medical • Special waste. This product contains
device used in hospital environments. The unit electronic and electrical components.
must be properly cleaned before disassembling. Discard disposable, replaced and left-
over parts in accordance with
Proper cleaning of the unit before Product End-of- appropriate industrial and environmental
Life disassembly must be performed by the former standards.
owner (hospital).
• Recycling. Worn-out batteries must be
recycled or disposed of properly in
accordance with appropriate industrial
and environmental standards.
Environmental declaration
Components with special environmental concern Construction materials
Components listed below shall be disposed of in The construction materials used in SERVO-s in % of
accordance with appropriate industrial and the total weight.
environmental standards.
PC boards (Printed circuit boards) Metal – total 72.5%
• PC 1771 Control, including Lithium battery • Aluminium 70%
• PC 1772 Monitoring, including Lithium battery • Steel, zink, brass 2.5%
• PC 1777 Panel including Backlight Inverter
Polymeric material – total 8%
• PC 1781 Pressure transducer, 2 each
• PA (Polyamide)
• PC 1784 Expiratory channel
• POM (Polyoxymethylene)
• PC 1785 Expiratory channel connector
• SI (Silicone)
• PC 1786 Expiratory channel cassette
• TPE (Thermoplastic elastomer)
• PC 1860 Main back-plane
• PUR (Polyurethane)
• PC 1861 Pneumatic back-plane
• ABS (Acrylicnitrilebutadienstyrene)
• PC 1862 DC/DC & Standard connectors
• EPDM (Ethylenepropylenedienemonomer)
• PC 1863 Power control
• PTFE (Polytetrafluoroethylene)
Other electronics • FPM (Fluororubber)
• TFT assembly including backlight • NBR (Nitrilerubber)
• Touch screen (glass) • PP (Polypropylene)
• O2 cell, containing caustic lime and lead (Pb) • PVC (Polyvinyl chloride)
• O2 Sensor, containing PC boards • PS (Polystyrene)
• Gas module Air, containing multiple PC boards
Electronics – total 19.5%
• Gas module O2, containing multiple PC boards
• Battery modules Nickel-Metal Hydride
• AC/DC Converter, containing PC boards
• Printed circuit boards, cables etc.
• Expiratory cassette
• Expiratory valve coil Others – very small amounts
• Safety valve pull magnet • Filter paper of fibre glass
• Battery modules Nickel-Metal Hydride
2 MTS-07-0010
3. Product End-of-Life Disassembly Instructions SERVO-s Ventilator System
To open:
1. Release screw.
2. Pull out cover.
3. Press latch and pull off cover.
4. Remove screws.
5. Lift off User Interface.
;
<
9
H
6
MTS-07-0010 3
4. SERVO-s Ventilator System Product End-of-Life Disassembly Instructions
To open:
1. Disconnect cable.
2. Remove six screws and separate the unit.
H PC board Glass
H 6 PC board Other electronics
4 MTS-07-0010
5. Product End-of-Life Disassembly Instructions SERVO-s Ventilator System
To disassemble:
1. Remove screws.
6
Other
electronics
PC board
6
6
6
6
MTS-07-0010 5
6. SERVO-s Ventilator System Product End-of-Life Disassembly Instructions
To disassemble:
1. Remove screws.
2. Release screws.
3. Pull off cover
Other electronics
Sealed unit,
contains
caustic lime
and lead
Other electronics
H
6
Other 9
6 electronics
H
{
PC board
Lithium battery
on PC boards
Nickel-Metal
Hydride battery PC board
6 MTS-07-0010
7. Product End-of-Life Disassembly Instructions SERVO-s Ventilator System
To disassemble:
1. Remove screws.
6
Other
electronics
PC board
6
Other
electronics
6
PC board
PC board
PC board
6
MTS-07-0010 7