Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Product Datasheet                                                                                             AOS03III Ser...
Product Datasheet                                                                                          AOS03III Series...
Product Datasheet                                                                                             AOS03III Ser...
Product Datasheet                                                                                       AOS03III SeriesSpe...
Product Datasheet                                                                                                AOS03III ...
Product Datasheet                                                                                       AOS03III SeriesGen...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                                    AOS03...
Product Datasheet                                                                                                 AOS03III...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                                AOS03III ...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                                AOS03III ...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                               AOS03III S...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                              AOS03III Se...
Product Datasheet                                                                                                   AOS03I...
Product Datasheet                                                                                                  AOS03II...
Product Datasheet                                                                                               AOS03III S...
Product Datasheet                                                                                              AOS03III Se...
Upcoming SlideShare
Loading in …5
×

3RU AOS03 Catv optical transmission platform

571 views

Published on

Published in: Technology, Business
  • Be the first to comment

  • Be the first to like this

3RU AOS03 Catv optical transmission platform

  1. 1. Product Datasheet AOS03III Series AOS03III optical transmission platform chassisIntroductionAOS03III platform chassis is standard 19-inch rack-mountingwith 3U high. The chassis provides 13 module slots for two powersupply modules, one control and network management moduleand ten application modules. A variety of application modules areavailable for flexible configuration. The modular design supportsmodules plug-and-play and blind-plug. Application modules canbe installed to any universal slots (10) and automaticallyidentified by a control module.The chassis adopts passive rear panel design, blindmate RF connector, which avoids cumbersome maintenanceprocedures of power-off, disconnecting and reconnecting cables and other operations. The chassis supportssingle power supply module and dual power supply for hot back-up. Unique low-consumption technology helpsachieve a total consumption of no more than 360W of a full loaded chassis. Moreover, the forcedconvection cooling system features monitoring status of each fan. It eases replacement work andensures long-time stable operation.Each module can be monitored by a control module or a network management module with a large TFTLCD display or on a remote monitor through standard SNMP network management system. CAN technologysupports stacking of multiple chassis, as a SNMP network management agent. The Operator can use a networkmanagement module to manage all chassis. This helps save IP address resources and the network managementinvestment. Operating parameters of each module are backed up in the control module. The operator can resetthem or restore them to replacement applications modules, which is very convenient for platform configuration.All modules support software online upgrades. Operations can be done on local control panel as well asour SNMP-compliant network management software-SysManager.Features u 3U rack-mounting chassis with 2 slots for power supply modules, 1 slot for network management control module and 10 universal slots for application modules. u Passive structure, solid and safe. u Hot-swapping and blindmate plug-in modules for easy configuration. u Low consumption design and forced cooling system reduce heating and increase reliability. u Single power supply or dual power supply for hot back-up. u Intelligent module and system design monitoring working parameters of all modules. Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  2. 2. Product Datasheet AOS03III Series u Big TFT screen with user-friendly interface. u Optional SNMP compliable network management system. u Multi-chassis stacking as a network management agent; and each module supports remote online upgrade. u Parameters of each application module can be stored, reset and copied.AOS03III modules u AOS03III-C Control Module u AOS03III-CM Network Management Control Module u AOS03III-PSAC/PSDC Power Supply Module u AOT03-31 Series Optical Transmitter Module u AOR03-31/32 Optical Receiver Module u AOR03R-31 Reverse Optical Receiver Module u AOT03R-31 Reverse Optical Transmitter Module u AOT1550-02-31/32 EDFA Module u AOT155D-31 1550nm Direct Modulation Optical Transmitter Module u ARSW01-31 RF Switch Module u AOSW01-31 Optical Switch Module u APA01-31 RF Pre-amplifier ModuleSpecifications General RF Connector F type Dimension 483mm(W)X133mm(H)X436.5mm(D) Weight 5.8Kg Installation Standard 19” 3U rack-mounting Status Display TFT LCD Status Monitoring Local or remote SNMP Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) Relative Humidity 15~95% non-condensing 2 power supply modules, 1 network management control Modules Supported module and 10 application modules CAN RJ11, support stacking DC Power supply Optional 24VDC Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  3. 3. Product Datasheet AOS03III Series AOS03III-C Control module /AOS03III-CM network management control moduleIntroductionAOS03III-C is only for local control, installed in one of the horizontalslots of AOS03III chassis. With a SNMP network management moduleinside, AOS03III-C upgrades to AOS03III-CM network managementcontrol module. An AOS03III platform has at least one AOS03III-Ccontrol module, while SNMP module can be added when it is needed.AOS03III-C/CM module has in front a large full-color TFT LCD displayscreen, operations buttons, the power status indicator and a RS232port, and on the back an RJ45 port for SNMP networks managementand a CAN connection port.The control module is not only a human-machine interface (HMI), but also a gateway for all application modules.After configuration, the operating parameters are stored in the application modules and backup in the controlmodule as well. AOS03III-CM module can collects data from local HMI or remote SNMP management server andforward it to the application modules, extract data for each modules to display on the local LCD screen, orforward it to a remote SNMP management server. Several AOS03III-C control modules connected by CAN wirecan be stacked and connect to a AOS03III-CM as a SNMP network management agent. The management controlmodule features classic button layout, innovative large screen full color TFT LCD display, fashionable menu(English and Chinese) and user-friendly operation. It has a backup of parameters of all modules, which helprestore the configuration parameters or configure new replacement modules easily. Operators can completesoftware upgrade of the machine and application modules locally (from the RS232 port) or remotely.Features u Hot swapping for plug-and-play. u Agency mode. After configuration, application modules operate normally even if there is no network management control module. u Stacking. Using CAN technology, multiple chassis (control modules) can be stacked and managed by one network management module to save the IP address resources and lower the equipment investment. u Color TFT screen with friendly human-machine interface, easy to operate. u Online software upgrade. u Copy, backup, restore parameters, convenient for the system configuration. u Standard SNMP with standard RFC and US standard MIB. u Multilingual interface. User can select a language in menu. Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  4. 4. Product Datasheet AOS03III SeriesSpecifications Technical Data Interface RS232 Data Format 8,1,0,115200 IP Interface RJ45 Data Rate 10/100M adaptive Display Screen 2.2”(176×220)TFT LCD Status Indicator 2 two-color LEDs for power supply modules Communication Protocol Standard SNMP SNMP Data Format RFC, US MIB Alarm Buzzer, Icon flash and Icon change Stacking CAN General Dimension 99mm(H)X33mm(W)X276.5mm(D) Weight 0.88Kg (without network management module) Power Consumption 5W Installation Plug-in for AOS03III chassis Operating Temperature -25℃~+50℃ (-7°F~+122°F) Storage Temperature -40℃~+85℃ (-40°F~+186°F) RH 15~95%(non-condensing) Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  5. 5. Product Datasheet AOS03III Series AOS03III-PSAC/PSDC power supply moduleIntroductionPower supply modules are installed in two special vertical slots of thechassis. The module front panel has one cooling fan, one power switchand one buckle. The back panel has a power socket, auto-locking device,fuse bases (one spare base). The module has delicate protection circuits,including overload protection, over-voltage protection, short circuitprotection, overheating protection, time delay activation. Single or dual(backup) power supply can be monitored on display of local controlmodule or remotely by standard SNMP network management software.Features u Small size with high efficiency. u Delicate protections, including short circuit protection, overload protection, over-voltage protection, and overheating protection. u Independent cooling fan. u Dual independent power supply for hot backup between modules, no peripheral circuit needed. u Real hot-swapping for plug and play.Specifications Technical Input Voltage 150~265VAC (AOS03III-PSAC) or -48VDC (AOS03III-PSDC) Output Voltage Stability 0.5% Load Stability ≤2% PARD and Noise Vpp≤0.5% output voltage (Resistive Load Voltage) a. overload 130% b. over-voltage 130% Protection c. short-circuit output near 0V(recover after troubleshooting) d. overheating e. startup-delayer 500ms≤T≤2s startup Input-Ground/Input-Output: AC1.5KV 5mA; Insulation Strength Output-Ground: AC0.5KV 5mA, insulation resistance>50MΩ MTTF ≥10,000 hours Power-factor ≥0.9 (load≥30%) Operating Voltage +18Vdc Operating Current Min. 0.4A Operating Current Max. 20A Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  6. 6. Product Datasheet AOS03III SeriesGeneralDimension 44.6mm(H)X88.6mm(W)X386.8mm(D)Weight 1.75KgPower Consumption 360WInstallation Plug-in for AOS03III chassisStatus Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CMMonitoring network management control moduleStorage Temperature -40℃~+85℃ (-40°~+186°F)RH 15~95% (non-condensing) Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  7. 7. Product Datasheet AOS03III Series AOT03-31 series optical transmitter moduleIntroductionAOT03-31 optical transmitter module takes up one AOS03III slot. One chassis can havehigh installation density of 10 transmitter modules. The module front panel has a statusindicator, a RF test port (TP) and an optical output port. The back panel has blind-mateRF connectors and a power/signal connector. It is easy to install and maintain.Taking advantages of brand GaAs module and low power consumption design, the heatvalue reduces to a very low level, which greatly improves the product stability. Inputlevel controlled by AGC can automatically achieve the best performance, while manualadjustment is an option (MGC) to meet user specific requirements. Independentnarrowcast input port is available to mix RF signals for optical transmission.Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise controlprogram includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,power-off control, ensures the laser diode a long life-span with stability.The total intelligent design automatically regulates these functions. The module can be monitored andcontrolled by a local control module or remote SNMP management software to meet user’s needs.Features u 870/1000MHz platform. u AGC/MGC with digital control attenuator integrated. u Patent pre-distortion correction technique. u Intelligent design with parameters back up, restore and reset, and software online upgrade. u Low power consumption, low heating value, high stability and environmental friendliness. u Plug and play, blind-mate RF connector.Specification Optical Wavelength 1310±20nm Reflection Loss ≥45dB Connector SC/APC or FC/APC 4dBm(≥2.5mw) 6dBm(≥4mw) 8dBm(≥6mw) 9dBm(≥8mw) Output Power 10dBm(≥10mw) 11dBm(≥13mw) 12dBm(≥16mw) 13dBm(≥20mw) 14dBm(≥25mw) 15dBm(≥30mw) Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  8. 8. Product Datasheet AOS03III Series RF Bandwidth 45~870/1000MHz Input level Broadcast: 75dBuV/ch (59 PAL channels+300MHz digital signal) Narrowcast: 85dBuV AGC ±5dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75 dB TP Level -20dB(Laser input) TP port (B.S.) on front panel RF Connector Input port (B.S.) on back panel CSO≥64dB Min. 10KM fiber loss, optical CTB≥68dB attenuator, optical receiver input Link Performance XM≥65dB @-1dBm and 59 channels PAL-D TV C/N≥52dB signals. General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.2Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information Output optical Working Optical RF RF input Amplifier - - - TP Nos. power(dBm) bandwidth connector connector Nos. module Nos.AOT03-31 8: 870MHz S:SC/APC M: Metric 1: Single 1: Single 1: Single - XX - - 1: 1GMHz F:FC/APC I: Imperial 2: Dual 2: Dual 2: Dual Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  9. 9. Product Datasheet AOS03III Series AOR03-31/32 optical receiver moduleIntroductionAOR03-31/32 optical receiver module take ups one AOS03III chassis slot. It supportsdual-path backup automatically. A chassis can install ten receiver modules, up to 20optical inputs and 10 paths RF outputs. The front panel has a status indicator, a RF testport, optical input ports, and back panel has a blind-mate RF connector and apower/signal connector. The installation and maintenance is very easy. Takingadvantages of brand GaAs module and low power consumption design, the heat valuestays at a very low level, which greatly improves the product stability.This module has two independent RF paths with two independent optical AGCs and electronic AGCs, and ASC RFoutput control, which ensures stable output level. Two independent paths of optical control and electroniccontrol RF switching circuits are hot backup, either optical input signal or electrical input signal is faulty, themachine can switch to the other path. This ensures uninterrupted signal transport, and the switching thresholdcan be set by users. Output level and equalizer can be adjusted for easy level distribution and cable transmission.The total intelligent design automatically regulates these functions. The module can be monitored andcontrolled by a local control module or a remote SNMP management software to meet user’s needs. This highperformance receiver module is particularly suited to head-end use and self-healing network.Features u 45~870/1000MHz platform. u Dual independent optical path with independent optical AGC, electrical AGC, ASC and MGC ensuring stable output. u Independent path of optical control and electronic control RF switching circuits are hot backup, and the switching threshold can be set by users, which ensures uninterrupted signal transport, u Intelligent design with parameters back up, restore and reset, and software online upgrade. u Low power consumption, low heating value, high stability and environmental friendliness. u Plug and play with blind-mate RF connector.Specifications Optical Wavelength 1290~1600nm Reflection Loss 45dB (Min.) Connector SC/APC Input Power -6~+2dBm Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  10. 10. Product Datasheet AOS03III Series RF Frequency Bandwidth 45~870/1000MHz Output Level 96dBuV@-6~+2dBm optical input AGC ±5dB Slope Control 0-3dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75dB Output Impendence 75Ω TP Level -20dB TP port (B.S.) on front panel Connector Input port (B.S.) on back panel CSO≥64dB Min. 10KM fiber loss, optical CTB≥68dB attenuator, optical receiver input Link Performance XM≥65dB @-1dBm and 59 channels PAL-D TV C/N≥52dB signals. General Dimension 130mm(H)X30.5mm(W)X431.8mm(D) Weight 1.19Kg Power Consumption ≤16W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information Frequency Fiber RF Optical receiving - - bandwidth connector connector component AOR03-31 (Single input) AOR03-32 (Dual input) P: PIN diode 8: 870MHz S: SC/APC M: Metric - - O: Photoelectrical 1: 1G F: FC/APC I: Imperial integrated module Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  11. 11. Product Datasheet AOS03III Series AOR03R-31 reverse optical receiver moduleIntroductionAOR03R-31 reverse optical receiver module take ups one AOS30III slot. It supportsfour-path independent reverse optical inputs. A chassis can install 10 receiver modules,up to 40 optical inputs and 40 RF outputs. The front panel has a status indicator, a RFtest port, optical input ports, and back panel has blind-mate RF connectors and apower/signal connector. The installation and maintenance is very easy. Takingadvantages of brand GaAs module and low power consumption design, the heatingreduces to a very low level, which greatly improves the product stability.The RF channel has independent optical AGC and output level adjustment function, which ensure stable outputlevel. It features wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios tomeet various kinds of applications. It automatically shut off RF output when optical input is not available. Thisgreatly suppresses the gathering noise for easy online hot backup. Each RF channel can be manually switchedon/off by software locally or remotely, which is convenient for troubleshooting. Users can choose the test portby software as well.The total intelligent design automatically regulates these functions. The module can be monitored andcontrolled by a local control module or remote SNMP management software to meet user’s needs.Features u High density. One 3U chassis can install 10 optical receiver modules, up to 40 optical inputs and 40 RF outputs. u Four independent channels with independent optical AGC and manual MGC to ensure stable level output. u Wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios. u Intelligent design, low power consumption, low heating value, high stability and environmental friendliness. u Plug and play with blind-mate RF connectors and a power/signal connector. u Complete functions, high reliability. Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  12. 12. Product Datasheet AOS03III SeriesSpecifications Optical Wavelength 1290~1600nm Reflection Loss 45dB (Min.) Connector SC/APC Input Power -20~0dBm RF Frequency Bandwidth 5~200MHz Output Level 90dBuV@-20~0dBm optical input Optical AGC -20~+0dB optical input Reflection Loss ≥16dB Flatness ±0.75dB Output Impendence 75Ω TP Level -20dB TP port (B.S.) on front panel Connector Input port (B.S.) on back panel Link Performance NPR≥30dB, NPR dynamic range≥20dB General Dimension 130mm(H)X30.5mm(W)X431.8mm(D) Weight 1.3Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (Non-condensing)Ordering information Model Basic Information Working Optical RF - - RF output Nos. bandwidth connector connector 1: 4-in-1 AOR03R-31 2: 2 independent 6: 65MHz S: SC/APC M: Metric - - 3: 2X2-in-1 2: 200MHz F: FC/APC I: Imperial 4: 4 independent 5: 2-in-1 auto-switching Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  13. 13. Product Datasheet AOS03III Series AOT03R-31 reverse optical transmitter moduleIntroductionAOT03R-31 reverse optical transmitter module features low noise and adjustable gaincontrol, simple structure, low power consumption, APC control and high reliability. It isapplicable for 1310nm or 1550nm reverse fiber optical transmission system. The built-inmicroprocessor achieves real-time monitoring of the laser working status and outputpower. When reverse optical transmitter module operates in abnormal status, it will bereported by the status LED or through the data bus with corresponding alarminformation. If a serious alarm occurs, the microprocessor will automatically turn off thelaser. Users can monitor the transmitter and run fault diagnosis by a networkmanagement control module.Features u High density. One 3U frame can hold ten reverse optical transmitter modules. u APC for stable level output. u Low noise and adjustable gain control, simple structure, low power consumption, complete functions and high reliability. u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade. u Low power consumption, low heating value, high stability and environmental friendliness. u Plug and play with blind-mate RF connector and power/signal connector.Specification Optical Wavelength 1310±20nm; 1550±20nm -3dBm(≥0.5mw) 0dBm(≥1mw) Output Power 3dBm(≥2mw) 6dBm(≥4mw) Reflection Loss ≥45dB Output Power stability ≥±0.5dB@25℃ Connector SC/APC RF Working Bandwidth 5~200MHz Impendence 75Ω Flatness ±0.5dB Reflection Loss ≥16dB Input Level 75±5dBuv TP level 75±1dBuv RF Connector Imperial Link Performance NPR≥30dB, NPR dynamic range ≥20dB Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  14. 14. Product Datasheet AOS03III Series General Dimension 130mm(H)×30.5mm(W)×431.8mm(D) Weight 1.1Kg Power Consumption ≤4W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information Output Working Optical RF Laser - - - Laser Optical Power bandwidth connector connector configuration AOT03R-31 L: 0.5~1mw 6: 65MHz S: SC/APC M: Metric F: FP I: With isolation - M: 1~2mw - - 2: 200MHz F: FC/APC I: Imperial D: DFB P: No isolation H: >2mw Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  15. 15. Product Datasheet AOS03III Series AOT1550-02-31/32 Erbium-doped fiber amplifier moduleIntroductionErbium-doped fiber amplifier module features low noise and high gain, simple structure,and high reliability. It is applicable for 1550nm fiber optical transmission system. Thebuilt-in microprocessor achieves real-time monitoring of pump laser working status andinput/output power. When the amplifier module operates in abnormal status, it will bereported by the status LED or through the data bus output corresponding alarminformation. If a serious alarm occurs, the microprocessor automatically turns off thelasers to protect the module. Users can monitor the amplifier module and run faultdiagnosis by a network management control module.Features u High density. One 3U frame can hold ten optical fiber amplifier modules. u ATC and APC for stable level output. u Low noise and adjustable gain control. u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade. u Low power consumption, low heating value, high stability and environmental friendliness. u Complete functions and high reliabilitySpecifications Technical Wavelength 1550±nm Input Power -3~+10dBm Output Power 13~24dBm Noise ≤5.0dB(@Pin=0dBm) Input Impendence ≥30dB Output Impendence ≥30dB Output Pump Leakage Power ≤-30dBm Input Return Loss ≥60dB Output Return Loss ≥60dB Polarization Dependent Gain ≤0.5dB General Dimension 130mm(H)×30.5mm(W)×431.8mm(D) Weight 1.3Kg Power Consumption ≤16W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operation Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing) Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  16. 16. Product Datasheet AOS03III SeriesOrdering information Model Basic Information Output optical - Nos. of output - - Fiber connector AOT1550-02-31 (single pump) power AOT1550-02-32 (dual pump) S: SC/APC - 1, 2, 3, 4 - XX - F: FC/APC Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  17. 17. Product Datasheet AOS03III Series AOT155D-31 direct-modulation optical transmitter moduleIntroductionAOT155D-31 direct-modulation optical transmitter module takes up one AOS03III slot.One chassis can have high installation density of 10 transmitter modules. The modulefront panel has a status indicator, a RF test port (TP) and an optical output port. Theback panel has blind-mate RF connectors and a power/signal connector. It is easy toinstall and maintain.Taking advantages of brand GaAs module and low power consumption design, the heatvalue reduces to a very low level, which greatly improves the product stability. Inputlevel controlled by AGC can automatically achieve the best performance, while manual adjustment is an option(MGC) to meet user specific requirements. Independent narrowcast input port is available to mix RF signals foroptical transmission.Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise controlprogram includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,power-off control, ensures the laser diode a long life-span with stability.The total intelligent design automatically regulates these functions. The module can be monitored andcontrolled by a local control module or remote SNMP management software to meet user’s needs.Features u 870/1000MHz platform. u AGC/MGC with digital control attenuator integrated. u Patent pre-distortion correction technique to achieve excellent non-liner performance. u Intelligent design with local or remote configuration. u Low power consumption, low heating value, high stability and environmental friendliness. u Plug and play, blind-mate RF connector.Specifications Optical Wavelength 1550±5nm or ITU wavelength optional Reflection Loss ≥45dB Connector SC/APC Output Power 6dBm(≥4mw) 8dBm(≥6mw) 9dBm(≥8mw) 10dBm(≥10mw) Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  18. 18. Product Datasheet AOS03III Series RF Bandwidth 45~870/1000MHz Input level 75dBuV/ch (59 PAL channels+300MHz digital signal) Digital input level @ 95dBuV AGC ±5dB Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz) Flatness ±0.75 dB TP Level -20dB(Laser input) TP port (B.S.) on front panel RF Connector Input port (B.S.) on back panel CSO≥60dB Link Performance (59 PAL chs) CTB≥65dB C/N≥51dB General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.2Kg Power Consumption ≤14W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information Output optical Operating Fiber RF - - power (dBm) bandwidth connector connector AOT155D-31 8: 870MHz S: SC/APC M: Metric - XX - 1: 1GMHz F: FC/APC I: Imperial Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  19. 19. Product Datasheet AOS03III Series ARSW01-31 RF switch moduleIntroductionARSW01-31 is a 3U RF switch module featuring manual and automatic RF signalswitching (AB dual path), and user-friendly operation. It is applicable for various systemsthat require RF signal control, switching and redundancy backup.Features u High density. One 3U frame can hold ten RF switch modules. u A/B path RF signals auto switching. u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade. u Low power consumption, low calorific value, high stability and environmental friendliness. u Complete functions and high reliability.Specifications Technical Bandwidth 5~870/1000 MHz In-band Flatness ±0.5 dB Output Impendence 75Ω Insert Loss ≤1.5 dB Operational Level 75~115dBuV Switching Time ≤10ms Switching mode Manual/Auto Isolation (A/B) ≥45 dB Default Switching Level 70dBuv (60chs analog signal) TP Level -20±1db vs. output port RF port TP port (B.S.) on front panel; Input port (B.S.) on back panel General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.0Kg Power Consumption ≤2W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information - Operating bandwidth RF connector ARSW01-31 - 8: 860MHz 1: 1GMHz M: Metric I: Imperial Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  20. 20. Product Datasheet AOS03III Series AOSW01-31 optical switch moduleIntroductionAOSW01-31 is a 3U optical switch module featuring automatic optical signal switchingand friendly operation. It is applicable for various systems that require optical signalcontrol, switching and redundancy backup.Features u High density. One 3U frame can hold ten optical switch modules. u A/B path optical signals auto switching. u Intelligent design, two-color status indicator, configuration parameters set locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade. u Low power consumption, low calorific value, high stability and environmental friendliness. u Complete functions and high reliability.Specifications Technical Wavelength 1260~1360nm or 1510~1610nm Insert Loss ≤1.5dB Polarization Dependent Loss ≤0.1dB Return Loss ≥55dB Channel Crosstalk ≥60dB Repeatability ≤±0.02dB Transmission Power ≤500mW Switching Time ≤10mS General Dimension 130mm(H)X30.5mm(W)x431.8mm(D) Weight 1.0Kg Power Consumption ≤2W Status Indicator Two-color LED (green/red) Locally on screen or remotely by SNMP system via AOS03III-CM Monitoring network management control module Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information AOSW01-31 (2X1) - Wavelength Fiber connector AOSW01-32 (2X2) - 1: 1310nm 2: 1550nm 3: Dual S:SC/APC F:FC/APC Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.
  21. 21. Product Datasheet AOS03III Series APA01-31 RF pre-amplifier moduleIntroductionAPA01-31 is a 3U RF pre-amplifier module. The module is applicable for various systemsthat require control, amplification and monitoring of RF signals.Features u Operating bandwidth 47~862/1000MHz. u Gain control ranges 10~20dB by 0.5dB stepping. u Gain and slope control can be set by stepping locally/remotely. u Intelligent management ensures best performance of amplifier components at different input electrical level. u Parameters displayed on the LCD in the front of chassis.Specifications Technical Bandwidth 47 MHz~1000 MHz Rated Max. Gain 20 dB In-band Flatness ±0.75 dB Rated Input Level 80dBuV Max. Input Level ≤90dBuV Rated Output Level 100dBuV Max. Output Level 104dBuV CTB ≥ 70dB @ rated input/output CSO ≥ 66dB @ rated input/output Input/output Return Loss ≥16dB (47~550MHz), 14dB (550~862/1000MHz) Gain Regulating Range 10~20dB Slope Regulating Range 0~4dB TP Level -20±0.5dBmV vs. RF output General Dimension 99mm(H)X33mm(W)×276.5mm(D) Weight 1.1Kg Power Consumption ≤8W Status Indicator Two-color LED (green/red) Operating Temperature -20℃~+50℃ (-4°~+122°F) Storage Temperature -40℃~+85℃ (-40°~+186°F) RH 15~95% (non-condensing)Ordering information Model Basic Information - Operating bandwidth RF connector APA01-31 - 8:860MHz 1:1GMHz M: Metric I: Imperial Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.

×