This document lists 68 pieces of refurbished semiconductor equipment from various manufacturers such as AG Associates, AMAT, Lam Research, and Veeco. The equipment includes rapid thermal processing (RTP) systems, plasma etchers, sputtering systems, evaporators, and more. Wafer sizes range from 2 to 8 inches. Most of the equipment is located in California, USA or Nanjing, China and all are refurbished. Contact information is provided to inquire about additional details.
Main Semiconductor Equipment Products May 26th 2020-SemiStar Corp.Emily Tan
The document lists 76 pieces of semiconductor fabrication equipment from various manufacturers such as AG Associates, AMAT, Lam Research, Varian, and others. The equipment includes rapid thermal processing tools, plasma etchers, sputtering systems, chemical vapor deposition tools, and more. All of the equipment has been refurbished and is for sale from Semistar Corp, located in California and Nanjing.
Aw 105 r plasma asher descum clean,Plasma Asher, Plasma Descum, Dry Clean, Semiconductor Equipment, Used Semiconductor Equipment, Semiconductor Process Equipment, Matrix 105, Matrix 205, Matrix 303, Matrix 403,Matrix 106,Matrix 104, Matrix 102,Matrix 101, Matrix 10, System One Stripper, Model 105, System One Etcher, model 303, model 403,Matrix 1107
The document contains a list of 309 items with their respective categories, models, and manufacturers. It includes various semiconductor fabrication equipment such as CVD tools from AMAT and ASM, etch tools from AMAT, metrology tools from KLA and Hitachi, wire bonders from KNS, and more. The list provides information on the types and models of equipment available from the company located in Asia with the website www.semistarcorp.com.
This document provides information about a refurbished Applied Materials AMAT P5000 Etcher for sale by Semistar Corp. The etcher includes a Mark II mainframe, 8 slot storage elevator, Phase III robot, dual hard drive system, flat screen monitors, heat exchangers, gas panel, generators, 200mm process kit, and calibrated MFCs. Additional customized configurations are available. Semistar Corp is located in San Jose, CA and can be contacted via email for more information about the etcher and other semiconductor equipment and parts listed on their website.
This document outlines the calibration capabilities and equipment of the G4S Parsons Pacific laboratory in Diego Garcia, BIOT. It lists temperature, dimensional, pressure, tachometers, panel meters, power supplies, meggers, oil dielectric testers, scales, and torque wrenches calibration systems and their ranges. Items in blue are not part of the Navy's scope of capability, while meggers, scales, and torque wrenches were recently added. The document was revised on September 4, 2014 to include additional calibration standards.
This document lists 68 pieces of refurbished semiconductor equipment from various manufacturers such as AG Associates, AMAT, Lam Research, and Veeco. The equipment includes rapid thermal processing (RTP) systems, plasma etchers, sputtering systems, evaporators, and more. Wafer sizes range from 2 to 8 inches. Most of the equipment is located in California, USA or Nanjing, China and all are refurbished. Contact information is provided to inquire about additional details.
Main Semiconductor Equipment Products May 26th 2020-SemiStar Corp.Emily Tan
The document lists 76 pieces of semiconductor fabrication equipment from various manufacturers such as AG Associates, AMAT, Lam Research, Varian, and others. The equipment includes rapid thermal processing tools, plasma etchers, sputtering systems, chemical vapor deposition tools, and more. All of the equipment has been refurbished and is for sale from Semistar Corp, located in California and Nanjing.
Aw 105 r plasma asher descum clean,Plasma Asher, Plasma Descum, Dry Clean, Semiconductor Equipment, Used Semiconductor Equipment, Semiconductor Process Equipment, Matrix 105, Matrix 205, Matrix 303, Matrix 403,Matrix 106,Matrix 104, Matrix 102,Matrix 101, Matrix 10, System One Stripper, Model 105, System One Etcher, model 303, model 403,Matrix 1107
The document contains a list of 309 items with their respective categories, models, and manufacturers. It includes various semiconductor fabrication equipment such as CVD tools from AMAT and ASM, etch tools from AMAT, metrology tools from KLA and Hitachi, wire bonders from KNS, and more. The list provides information on the types and models of equipment available from the company located in Asia with the website www.semistarcorp.com.
This document provides information about a refurbished Applied Materials AMAT P5000 Etcher for sale by Semistar Corp. The etcher includes a Mark II mainframe, 8 slot storage elevator, Phase III robot, dual hard drive system, flat screen monitors, heat exchangers, gas panel, generators, 200mm process kit, and calibrated MFCs. Additional customized configurations are available. Semistar Corp is located in San Jose, CA and can be contacted via email for more information about the etcher and other semiconductor equipment and parts listed on their website.
This document outlines the calibration capabilities and equipment of the G4S Parsons Pacific laboratory in Diego Garcia, BIOT. It lists temperature, dimensional, pressure, tachometers, panel meters, power supplies, meggers, oil dielectric testers, scales, and torque wrenches calibration systems and their ranges. Items in blue are not part of the Navy's scope of capability, while meggers, scales, and torque wrenches were recently added. The document was revised on September 4, 2014 to include additional calibration standards.
This document contains an inventory list of 215 items located in either Nanjing, China or Morgan Hill, CA USA. The majority of the items are various types of process equipment used in semiconductor manufacturing, including bonders, chillers, coaters, CVD tools, developers, etchers, evaporators, furnaces, metrology equipment, ovens, PECVD tools, plasma ashers, pumps, RTP tools, sputtering systems and more. The items are from various manufacturers such as K&S, SMC, SVG, SOLITEC, PlasmaLab, BOLD, Temescal, Varian, Ditector, CANON, Nanometrics, Gaertner Scientific, Rudolph Research
Plasma etcher rie icp drie bosch process equipmentEmily Tan
This document lists various used semiconductor fabrication equipment for sale, including plasma etchers, reactive ion etchers (RIE), and asher systems from manufacturers like STS, Lam Research, Oxford Instruments, ICP Bosch, and Tegal. The prices range from $275,000 for a Lam Research 4420 plasma etch tool down to $9,500 for a Yield Engineering Systems dry asher. Models include STS Multiplex ICP systems, Lam AutoEtch and Rainbow tools, Oxford Plasmalab RIEs, and various plasma etchers and asher systems from Tegal, Matrix, Plasma Therm, and others.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
76 roberto o. pellizzari - 6820598 - capillary fuel injector with metering ...Mello_Patent_Registry
Roberto O. Pellizzari, John Baron, Jan Roger Linna, Peter Loftus, Peter Palmer, John Paul Mello, Stuart Bennett Sprague - Capillary Fuel Injector with Metering Valve for an Internal Combustion Engine
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
The document describes a Spice Park product database that is regularly updated. It contains details of 4,930 parts across various categories as of the November 2018 update. The bulk of the parts are semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It then provides a more detailed breakdown of the 430 general purpose rectifier diodes in the semiconductor category.
Learn how we design these components for high temperature, high pressure, and/or corrosive environments. Discover the different materials used based on a variety of applications. View some of the very unique and intricate Sweco custom designs, and corresponding technical drawings. Sweco designs and manufactures Pressure Vessels and Tanks, Pig Launchers and Receivers, Duct Work, Transition Pieces, Bellmouth Reducers, Spectacle and Line Blinds, Air Intake Stacks and Dampers, Conical Strainers, Instrument Stands and other custom fabricated products.
Accu thermo aw 610 rapid thermal processorPeter Chen
The document describes the AccuThermo AW 610 Rapid Thermal Processor. It is a rapid thermal processor that has been in use for over 40 years with thousands of customers from 40 countries. It provides rapid and precise thermal processing and is used in applications such as semiconductor manufacturing.
This document provides information on general purpose rectifier diodes in Spice Park's inventory in January 2019. It contains a table listing 14 manufacturers that provide 441 total diodes. The majority are from Toshiba (135 diodes) and INTERSIL (118 diodes). For each diode part number, details are given on the manufacturer, model type, thermal characteristics, and last update date.
With an installed base of more than thousands of systems, Perkin-Elmer was a leading supplier of sputter deposition equipment for high technology application in 1990's. The Perkin-Elmer 4400 Series, fully refurbished and upgraded by Allwin21 Corp., were designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every fully refurbished and upgraded Perkin Elmer sputtering system was supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
Perkin-Elmer 4400, 4410, 4450 Proven Sputter Materials:
Al+W ,Cr/SiO2,SiC ,Ti+Au,InSnO ,SiO2 ,Ti/W ,Ti+Au+Ni,Al2O3 ,Mo ,SiO2+O2 ,Ni/Fe+Cu+SiO2,Ag MoSi2 ,Si+N2(Si3N4) ,Ti/W+Au,Au ,Mo2Si5 ,Si+N2+B4C, Ti/W+Au+Ta, C, Mo5Si3 ,Ta ,Ti/W+Al/Si,Cr Ni ,TaC, Ti/W+Ni/Cr+Au,Cr/Co ,Ni/Cr, Ta+Au , Ti/W+Pt,Cr/Au, Ni+Ni/Cr, TaSi2 ,Al+Ti/W+Ag, Cr+Cu, Ni/Fe ,Ta+SiO2 , W+Al2O3,Cr/Si ,Pt, Zr ,Zn,Cr/SiO, TiO2 ,TiO2+Cr, ZnO2
Vapor Combustor Improvement Project LinkedIn Presentation February 2016Tim Krimmel, MEM
This document presents a vapor combustor/flare system improvement project for Baker Hughes Chemical Facility. It describes the development of a nonlinear programming model in Excel to analyze the vapor system's performance over changing variables. Field data was collected from pressure transmitters and flowmeters to validate the model. A meeting with plant engineers helped determine production risk probabilities and vapor stream loadings to apply in a Monte Carlo simulation. The model was validated by comparing its descriptive statistics to field data statistics. The goal is to systematically analyze the system and propose solutions to improve performance using modeling, simulation, and data.
Plug Valve Installation and Operating Instructionsalexbrown529
CWT Valve is one of the reputed manufacturers of Plug Valve. They offer a top quality plug valve in various designs such as cryogenic and steam jacketed plug valves, which are structured and designed to deliver high performance under the effective operative techniques. For more information, visit: http://cwtvalve.com/plug-valve/.
This document provides equipment details for a project including a biomass handling system, boiler, steam turbine generator train, and supporting systems. Over 50 pieces of equipment are listed along with descriptions and specifications. Foundations and drawings are to be estimated. The project number is 12345 for client DEF on the biomass handling, boiler, and steam turbine generator systems.
"The Westinghouse Pressurized
Water Reactor Nuclear Power Plant" is a
complete revision of the "Systems Summary of a
Westinghouse Pressurized Water Reactor
Nuclear Power Plant" published in 1971 with
subsequent reprintings.
Semiconductor equipment spare parts in usa may 20th 2020Emily Tan
This document contains a list of 148 items for sale including components for semiconductor equipment such as mass flow controllers, vacuum components, RF matching networks, microwave generators, ion implanters, wafer handling equipment and more. The items are from various manufacturers including AMAT, ASTEX, Axcelis, Brooks Automation, BOC Edwards and others.
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
This document contains an inventory list of 215 items located in either Nanjing, China or Morgan Hill, CA USA. The majority of the items are various types of process equipment used in semiconductor manufacturing, including bonders, chillers, coaters, CVD tools, developers, etchers, evaporators, furnaces, metrology equipment, ovens, PECVD tools, plasma ashers, pumps, RTP tools, sputtering systems and more. The items are from various manufacturers such as K&S, SMC, SVG, SOLITEC, PlasmaLab, BOLD, Temescal, Varian, Ditector, CANON, Nanometrics, Gaertner Scientific, Rudolph Research
Plasma etcher rie icp drie bosch process equipmentEmily Tan
This document lists various used semiconductor fabrication equipment for sale, including plasma etchers, reactive ion etchers (RIE), and asher systems from manufacturers like STS, Lam Research, Oxford Instruments, ICP Bosch, and Tegal. The prices range from $275,000 for a Lam Research 4420 plasma etch tool down to $9,500 for a Yield Engineering Systems dry asher. Models include STS Multiplex ICP systems, Lam AutoEtch and Rainbow tools, Oxford Plasmalab RIEs, and various plasma etchers and asher systems from Tegal, Matrix, Plasma Therm, and others.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
76 roberto o. pellizzari - 6820598 - capillary fuel injector with metering ...Mello_Patent_Registry
Roberto O. Pellizzari, John Baron, Jan Roger Linna, Peter Loftus, Peter Palmer, John Paul Mello, Stuart Bennett Sprague - Capillary Fuel Injector with Metering Valve for an Internal Combustion Engine
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
The document describes a Spice Park product database that is regularly updated. It contains details of 4,930 parts across various categories as of the November 2018 update. The bulk of the parts are semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It then provides a more detailed breakdown of the 430 general purpose rectifier diodes in the semiconductor category.
Learn how we design these components for high temperature, high pressure, and/or corrosive environments. Discover the different materials used based on a variety of applications. View some of the very unique and intricate Sweco custom designs, and corresponding technical drawings. Sweco designs and manufactures Pressure Vessels and Tanks, Pig Launchers and Receivers, Duct Work, Transition Pieces, Bellmouth Reducers, Spectacle and Line Blinds, Air Intake Stacks and Dampers, Conical Strainers, Instrument Stands and other custom fabricated products.
Accu thermo aw 610 rapid thermal processorPeter Chen
The document describes the AccuThermo AW 610 Rapid Thermal Processor. It is a rapid thermal processor that has been in use for over 40 years with thousands of customers from 40 countries. It provides rapid and precise thermal processing and is used in applications such as semiconductor manufacturing.
This document provides information on general purpose rectifier diodes in Spice Park's inventory in January 2019. It contains a table listing 14 manufacturers that provide 441 total diodes. The majority are from Toshiba (135 diodes) and INTERSIL (118 diodes). For each diode part number, details are given on the manufacturer, model type, thermal characteristics, and last update date.
With an installed base of more than thousands of systems, Perkin-Elmer was a leading supplier of sputter deposition equipment for high technology application in 1990's. The Perkin-Elmer 4400 Series, fully refurbished and upgraded by Allwin21 Corp., were designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every fully refurbished and upgraded Perkin Elmer sputtering system was supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
Perkin-Elmer 4400, 4410, 4450 Proven Sputter Materials:
Al+W ,Cr/SiO2,SiC ,Ti+Au,InSnO ,SiO2 ,Ti/W ,Ti+Au+Ni,Al2O3 ,Mo ,SiO2+O2 ,Ni/Fe+Cu+SiO2,Ag MoSi2 ,Si+N2(Si3N4) ,Ti/W+Au,Au ,Mo2Si5 ,Si+N2+B4C, Ti/W+Au+Ta, C, Mo5Si3 ,Ta ,Ti/W+Al/Si,Cr Ni ,TaC, Ti/W+Ni/Cr+Au,Cr/Co ,Ni/Cr, Ta+Au , Ti/W+Pt,Cr/Au, Ni+Ni/Cr, TaSi2 ,Al+Ti/W+Ag, Cr+Cu, Ni/Fe ,Ta+SiO2 , W+Al2O3,Cr/Si ,Pt, Zr ,Zn,Cr/SiO, TiO2 ,TiO2+Cr, ZnO2
Vapor Combustor Improvement Project LinkedIn Presentation February 2016Tim Krimmel, MEM
This document presents a vapor combustor/flare system improvement project for Baker Hughes Chemical Facility. It describes the development of a nonlinear programming model in Excel to analyze the vapor system's performance over changing variables. Field data was collected from pressure transmitters and flowmeters to validate the model. A meeting with plant engineers helped determine production risk probabilities and vapor stream loadings to apply in a Monte Carlo simulation. The model was validated by comparing its descriptive statistics to field data statistics. The goal is to systematically analyze the system and propose solutions to improve performance using modeling, simulation, and data.
Plug Valve Installation and Operating Instructionsalexbrown529
CWT Valve is one of the reputed manufacturers of Plug Valve. They offer a top quality plug valve in various designs such as cryogenic and steam jacketed plug valves, which are structured and designed to deliver high performance under the effective operative techniques. For more information, visit: http://cwtvalve.com/plug-valve/.
This document provides equipment details for a project including a biomass handling system, boiler, steam turbine generator train, and supporting systems. Over 50 pieces of equipment are listed along with descriptions and specifications. Foundations and drawings are to be estimated. The project number is 12345 for client DEF on the biomass handling, boiler, and steam turbine generator systems.
"The Westinghouse Pressurized
Water Reactor Nuclear Power Plant" is a
complete revision of the "Systems Summary of a
Westinghouse Pressurized Water Reactor
Nuclear Power Plant" published in 1971 with
subsequent reprintings.
Semiconductor equipment spare parts in usa may 20th 2020Emily Tan
This document contains a list of 148 items for sale including components for semiconductor equipment such as mass flow controllers, vacuum components, RF matching networks, microwave generators, ion implanters, wafer handling equipment and more. The items are from various manufacturers including AMAT, ASTEX, Axcelis, Brooks Automation, BOC Edwards and others.
Similar to Semiconductor equipment in USA May 30 2020 (20)
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
The document lists various types of semiconductor fabrication equipment including:
- Plasma etchers such as the Applied Materials Plasma II and Lam AutoEtch 590.
- Thin film deposition equipment such as the AMAT AMP-3300 PECVD and Emscope SC-650 Series.
- Mask aligners including the Canon PLA-501 F and Neutronix PLA 500/501.
- Wet benches, plasma ashers, chillers, ovens, rapid thermal processing equipment, coat/develop/bake tools, metrology systems, and miscellaneous parts.
The document lists various used plasma etch, stripper, and asher equipment for sale from Semistar Corp., ranging in price from $9,500 to $175,000. The most expensive items are a Matrix 209S plasma asher for $175,000 and a Matrix 105 plasma asher for $98,000, while several Branson and Matrix plasma ashers and etchers are listed at $12,500, $22,500, and $29,500. Semistar Corp. sells used semiconductor equipment and provides parts and service in the U.S.
This document lists several plasma deposition equipment items for sale including their manufacturer, model, type, and price. The most expensive items are a $79,500 Plasma Therm 790 Series PECVD system and a $77,500 Oxford Instruments Plasmalab 80+ DPCVD system. Also listed are lower cost plasma etchers and deposition systems starting at $5,000 from Oxford Plasma Technology.
This document lists various oven and furnace models from different manufacturers along with their prices, ranging from $1,200 to $3,980. It provides contact information for Semistar Corp, a company that sells semiconductor equipment parts and services in the US.
Metrology probe tester equipment instrumentEmily Tan
This document lists various semiconductor manufacturing equipment for sale, including their prices. The most expensive items are an electron beam lithography system for $1,000,000 and an X-ray diffraction system for $78,000. Other listed equipment include wafer probers, thin film measurement systems, surface profilers, and microscopy tools, with prices ranging from $35,000 to under $5,000. The document appears to be from a company called Semistar Corp that sells used semiconductor equipment.
The document lists several used mask aligners for sale from Semistar Corp, including various Canon Neutronix and PLA models priced between $18,500 to $35,000. Contact and company information is provided at the bottom for Semistar Corp, which sells semiconductor equipment parts and used mask aligners in the United States.
This document lists various electron beam evaporators and thermal evaporators for sale from multiple manufacturers including CHA Industries, Temescal, Varian, TES, Airco Temescal, and Kurt J Lesker. The prices range from $145,000 for some combined e-beam and thermal evaporators from Varian and CHA Industries down to $18,500 for older model Varian e-beam evaporators. Contact information is provided for Semistar Corp. regarding sales of semiconductor equipment parts and services.
This document lists equipment for sale from various manufacturers for semiconductor wet processing including batch developing stations, plating equipment, wet benches, and spin dryers priced between $1,980 to $35,000. Key items include a BOLD batch developing station for $35,000, an EEJA manual plater for $35,000, a Gold Techni plating bath system for $15,000, and various wet process equipment from APT and Wet Process Equipment between $7,500 to $9,500.
This document lists various sputtering systems and their prices from different manufacturers including Perkin-Elmer, Materials Research Corporation, Temescal, CPA, and CVC Products. The most expensive systems are three Perkin-Elmer models ranging from $125,000 to $155,000, while the cheapest option is a CVC Products system at $12,500. Contact information is provided for Semistar Corp for additional semiconductor equipment parts and services.
Used SMT & PTH &ATE assembly equipment inventoryEmily Tan
Used SMT & PTH &ATE assembly equipment inventory:Pls eamil us for the availability of the Used SMT & PTH &ATE assembly equipment. Appreciate your time!
Electronic test equipment, Oscilloscope, Spectrum, Analyzer ,DMMEmily Tan
Electronic test equipment Oscilloscope Spectrum Analyzer DMM:The following items (ID-SS8267-1-1) are subject to prior sale without notice. These items are only for end users.
Lam Research ,Novellus, Gasonics, Tel ,Tokyo Electron Ltd, Matrix etc. Spare ...Emily Tan
Lam Research Novellus Gasonics Tel Tokyo Electron Ltd Matrix etc. Spare Parts:The items are subject to prior sale without notice. These items are only for end users.
Semiconductor Equipment:Please us for more info and availability. They are subject to prior sale without notice.These items are only for end users. Appreciate your time! sales@semistarcorp.com . ID-8032-1-1
Semiconductor Equipment Inventory.Please email us for more info/ the availability of these equipment. These are subject to prior sale.Appreciate your time! sales@semistarcorp.com
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...Fwdays
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?