The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
This document provides a parts list from SpicePark in 2021. It includes 5,621 total parts, with semiconductors making up 75% of the parts. The list breaks down the parts into categories of semiconductors, passive parts, batteries, mechanical parts, DC motors, and lamps. It then provides further details on the specific part numbers and manufacturers for one type of semiconductor part, diodes/general purpose rectifiers, of which there are 453 parts.
Semiconductor equipment and parts at san jose ca usa may 2020Emily Tan
This document lists over 100 items for sale including:
- Bulk lots of various plumbing fittings, sorbent pillows/pads/socks, and precision equipment parts
- Process equipment such as wafer cleaning systems, gas cabinets, temperature chambers, and vacuum equipment
- Instrumentation including gas monitors, flow meters, scales, and leak detectors
- Semiconductor manufacturing equipment parts like electrostatic chucks, pedestals, and reticle loaders
- Various valves, fittings, cables, and other industrial components
The seller appears to specialize in used semiconductor and industrial equipment parts.
This document summarizes a 16-channel LED driver chip. It has 12-bit grayscale PWM control and 6-bit dot correction for each channel. It can drive LEDs with currents from 0 to 72mA. It also has features like LED open detection, thermal error flag, EEPROM for storing settings, and a serial interface. It is suitable for applications like LED signs, displays, and general high-current LED driving.
This document discusses the design of a power factor correction (PFC) circuit using critical conduction mode (CRM) control. It begins with an introduction to poor power factor in rectifying circuits and how PFC improves power factor. It then presents the application circuit using a TB6819AFG PFC controller IC. Key parameters are specified and the circuit operation is explained. Design steps are outlined to calculate component values to achieve the desired power factor ratio near unity.
Producing PCB transformers since 1981, now Itacoil also provides support to SMPS designers and manufacturers for the design and pre-compliance of the converters equipped with Itacoil components.
The primary aim of the demo board optimization shown in this comparative test report was cost saving, maintaining the same general properties of the original NXP TEA2016DB1519v2 board, along with any possible efficiency improvement basically with no other action than the replacement of the LLC resonant transformer, PFC inductor, Common Mode and Differential noise mains filter.
No expensive materials such as nanocrystalline cores, costly alloy powders cores, etc. have been used.
This is a synthetic version of the full test report, that you can request by clicking on the dedicated link in the slides or by email to contatto@itacoilmail.it.
The document describes a spice park, which is a collection of electronic components organized by type and manufacturer. It provides an overview of the total number of parts in the spice park by category, as well as breakdowns of specific semiconductor types and parts. The total number of parts in the spice park was updated to 4,914 as of October 2018, with semiconductors making up the largest portion at 75%. Lists then provide further details on quantities and manufacturers of general purpose rectifier diodes.
The document provides a summary of the Spice Park inventory as of September 2018. It details that the total inventory was 4,893 pieces, with the majority being semiconductor parts at 75%. It then breaks down the semiconductor parts by manufacturer and part number, showing updates to the diode/general purpose rectifier category.
This document provides a parts list from SpicePark in 2021. It includes 5,621 total parts, with semiconductors making up 75% of the parts. The list breaks down the parts into categories of semiconductors, passive parts, batteries, mechanical parts, DC motors, and lamps. It then provides further details on the specific part numbers and manufacturers for one type of semiconductor part, diodes/general purpose rectifiers, of which there are 453 parts.
Semiconductor equipment and parts at san jose ca usa may 2020Emily Tan
This document lists over 100 items for sale including:
- Bulk lots of various plumbing fittings, sorbent pillows/pads/socks, and precision equipment parts
- Process equipment such as wafer cleaning systems, gas cabinets, temperature chambers, and vacuum equipment
- Instrumentation including gas monitors, flow meters, scales, and leak detectors
- Semiconductor manufacturing equipment parts like electrostatic chucks, pedestals, and reticle loaders
- Various valves, fittings, cables, and other industrial components
The seller appears to specialize in used semiconductor and industrial equipment parts.
This document summarizes a 16-channel LED driver chip. It has 12-bit grayscale PWM control and 6-bit dot correction for each channel. It can drive LEDs with currents from 0 to 72mA. It also has features like LED open detection, thermal error flag, EEPROM for storing settings, and a serial interface. It is suitable for applications like LED signs, displays, and general high-current LED driving.
This document discusses the design of a power factor correction (PFC) circuit using critical conduction mode (CRM) control. It begins with an introduction to poor power factor in rectifying circuits and how PFC improves power factor. It then presents the application circuit using a TB6819AFG PFC controller IC. Key parameters are specified and the circuit operation is explained. Design steps are outlined to calculate component values to achieve the desired power factor ratio near unity.
Producing PCB transformers since 1981, now Itacoil also provides support to SMPS designers and manufacturers for the design and pre-compliance of the converters equipped with Itacoil components.
The primary aim of the demo board optimization shown in this comparative test report was cost saving, maintaining the same general properties of the original NXP TEA2016DB1519v2 board, along with any possible efficiency improvement basically with no other action than the replacement of the LLC resonant transformer, PFC inductor, Common Mode and Differential noise mains filter.
No expensive materials such as nanocrystalline cores, costly alloy powders cores, etc. have been used.
This is a synthetic version of the full test report, that you can request by clicking on the dedicated link in the slides or by email to contatto@itacoilmail.it.
Semiconductor equipment semi star may 2020-ss7270Emily Tan
This document lists over 200 items for sale by a company, including various laboratory equipment, analytical instruments, manufacturing tools, and other industrial devices. The items are available only to end users and the listing is subject to change without notice. Contact information is provided to inquire about availability.
Brochure- What's New at Probe Aug 15 Rev 4Marc McKinlay
Probe provides a variety of open hole logging tools to assess hydrocarbon reservoirs, including a Litho-density Tool to measure density and lithology, Compensated Neutron Tools to measure porosity and identify fluid types, and a Dual Induction Laterlog to measure deep, medium, and shallow resistivity. Probe manufactures a complete portfolio of downhole tools used in combination to better understand reservoirs.
This document provides an instrument index for a cooling system, listing over 200 instruments including flow elements, flow indicators, and flow indicating transmitters. It includes key details for each instrument such as tag number, loop number, description, I/O type, location, original equipment details, and installation and supplier details. The index categorizes instruments by their association with different pieces of equipment in the cooling system such as tundishes and coolers.
This document provides specifications for a 1250REOZM model diesel generator set. Key details include:
- The set has a 1250-1280 kW standby and 1155-1165 kW prime rating at 60 Hz.
- It is powered by a 12 cylinder S12R-Y1PTA-2 diesel engine.
- Standard features include an isochronous governor for precise frequency regulation and a PMG for excellent load response.
- The document lists detailed technical specifications and dimensions for the generator, engine, cooling and fuel systems.
- Optional accessories that can be added are also outlined.
With an installed base of more than thousands of systems, Perkin-Elmer was a leading supplier of sputter deposition equipment for high technology application in 1990's. The Perkin-Elmer 4400 Series, fully refurbished and upgraded by Allwin21 Corp., were designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every fully refurbished and upgraded Perkin Elmer sputtering system was supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
Perkin-Elmer 4400, 4410, 4450 Proven Sputter Materials:
Al+W ,Cr/SiO2,SiC ,Ti+Au,InSnO ,SiO2 ,Ti/W ,Ti+Au+Ni,Al2O3 ,Mo ,SiO2+O2 ,Ni/Fe+Cu+SiO2,Ag MoSi2 ,Si+N2(Si3N4) ,Ti/W+Au,Au ,Mo2Si5 ,Si+N2+B4C, Ti/W+Au+Ta, C, Mo5Si3 ,Ta ,Ti/W+Al/Si,Cr Ni ,TaC, Ti/W+Ni/Cr+Au,Cr/Co ,Ni/Cr, Ta+Au , Ti/W+Pt,Cr/Au, Ni+Ni/Cr, TaSi2 ,Al+Ti/W+Ag, Cr+Cu, Ni/Fe ,Ta+SiO2 , W+Al2O3,Cr/Si ,Pt, Zr ,Zn,Cr/SiO, TiO2 ,TiO2+Cr, ZnO2
Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
Cooling capacity: 51.1 ÷ 306.6 kW
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants
This document provides a product inventory for SpicePark in September 2019. It consists of three sections:
1) An overview showing the total inventory of 5,058 pieces categorized by product type with semiconductors making up 75% of the inventory.
2) A breakdown of the 451 pieces of general purpose rectifier diodes listing the manufacturer and number of pieces for each.
3) Details for one type of general purpose rectifier diode including the part number, manufacturer, thermal rating and remarks for 160 individual parts.
This document provides a product inventory for SpicePark in July 2019. It consists of tables listing the various components in their inventory, including the number of pieces of each part. The largest category is semiconductors, making up 75% of the total inventory of 5,038 pieces. Other categories include passive parts, batteries, mechanical parts, DC motors, and lamps.
This document provides a parts list and inventory for SpicePark, a company that sells semiconductor, passive, battery, mechanical and other electronic components. It includes a breakdown of the company's product categories by percentage of total stock. Lists of individual part numbers, descriptions and quantities are provided for semiconductor diodes and other common electronic parts. The document appears to be SpicePark's internal inventory and sales report from June 2019.
This document discusses heart rate variability (HRV) analysis techniques including time domain, frequency domain, and non-linear analyses. It provides examples of HRV analyses on data collected from tilt table tests and baroreflex sensitivity tests using nitroglycerin and phenylephrine drugs. Graphs show changes in heart period and interbeat interval over time during the tests and frequency domain analyses breaking down power in very low, low, and high frequency bands.
This document provides information on decade and binary counters from National Semiconductor, including the DM5490, DM7490A, and DM7493A models. It contains specifications, pinout diagrams, logic diagrams, and truth tables for the counters. The counters can be used for divide-by-ten counting in BCD format or divide-by-five/eight binary counting. They have features such as master-slave flip-flops, gated zero reset, and maximum operating frequencies of 32-42MHz.
This document provides specifications for a 1600REOZM generator set including:
- Ratings for standby and prime power output between 1380-1630 kW
- It is a 4-cycle, turbocharged diesel generator set with a 60Hz or 50Hz output
- Standard features include a one-year warranty, EPA emissions compliance, and digital voltage regulation
This document provides information on semiconductor products in the SpicePark 2019 catalog. It includes a breakdown of the product mix showing semiconductors make up 75% of the catalog. Lists of various semiconductor part numbers, descriptions and quantities are provided for diodes, transistors, ICs and other components. Specifications like manufacturer, thermal rating and remarks are given for many general purpose rectifier diodes.
This document provides technical specifications for Daikin outdoor units for pair application using R-407C refrigerant.
It includes specifications for several models ranging from R25 to RP250 in cooling capacity. Dimensions, weights, materials, sound levels, fan specs, heat exchanger details, refrigerant circuits, compressor types, electrical data and safety devices are provided for each model. Electrical diagrams and installation guidelines are also included.
This document provides information on semiconductor products available from Bee Technologies in May 2019. It includes a breakdown of the company's product stock by category, with semiconductors making up 75% of the total 5,006 pieces. Lists then provide details on each semiconductor product, including part numbers, manufacturers, thermal ratings, and remarks.
This document provides technical specifications for a 750 kVA diesel generator set including:
1) Generator output voltages and frequencies at 50Hz and 60Hz, motor starting capabilities, and alternator performance data.
2) Protections and features of the generator controller.
3) Engine specifications including model, displacement, emissions compliance, and fuel consumption rates.
4) Dimensions and shipping data for the generator enclosure.
5) Cooling system details including radiator specifications and cooling airflow.
This document provides preliminary datasheet information for the RJP60V0DPM 600V-22A IGBT. Key specifications and features include:
- High breakdown voltage of 600V with low collector-emitter saturation voltage of 1.5V typical.
- Short circuit withstand time of 6 microseconds typical.
- Trench gate and thin wafer technology.
- Maximum ratings, electrical characteristics, switching characteristics and thermal characteristics are provided.
ASCO Numatics Valve Redundant Control System, RCS, Pilot Valve System, Sil 3Thorne & Derrick UK
The document describes a Redundant Control System (RCS) that provides complete functional safety and enhanced reliability for process control applications up to SIL 3. The RCS uses a redundant, fault-tolerant architecture with no single point of failure to prevent unwanted closure of a process valve. It can be implemented with or without an onboard diagnostic processor. The RCS is available in normally closed, normally open, and double acting configurations to suit different process safety requirements. It provides automated partial stroke testing of valves for diagnostics.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
Semiconductor equipment parts may 2020 part1Emily Tan
The document lists 153 items for sale including various used semiconductor fabrication equipment parts and components. Items include vacuum pumps, RF generators, wafer handling equipment, optical inspection systems, and numerous circuit boards and other spare parts for various etch, deposition, and lithography systems. The seller is Semistar Corporation and they can be contacted via email for availability and pricing.
Semiconductor equipment semi star may 2020-ss7270Emily Tan
This document lists over 200 items for sale by a company, including various laboratory equipment, analytical instruments, manufacturing tools, and other industrial devices. The items are available only to end users and the listing is subject to change without notice. Contact information is provided to inquire about availability.
Brochure- What's New at Probe Aug 15 Rev 4Marc McKinlay
Probe provides a variety of open hole logging tools to assess hydrocarbon reservoirs, including a Litho-density Tool to measure density and lithology, Compensated Neutron Tools to measure porosity and identify fluid types, and a Dual Induction Laterlog to measure deep, medium, and shallow resistivity. Probe manufactures a complete portfolio of downhole tools used in combination to better understand reservoirs.
This document provides an instrument index for a cooling system, listing over 200 instruments including flow elements, flow indicators, and flow indicating transmitters. It includes key details for each instrument such as tag number, loop number, description, I/O type, location, original equipment details, and installation and supplier details. The index categorizes instruments by their association with different pieces of equipment in the cooling system such as tundishes and coolers.
This document provides specifications for a 1250REOZM model diesel generator set. Key details include:
- The set has a 1250-1280 kW standby and 1155-1165 kW prime rating at 60 Hz.
- It is powered by a 12 cylinder S12R-Y1PTA-2 diesel engine.
- Standard features include an isochronous governor for precise frequency regulation and a PMG for excellent load response.
- The document lists detailed technical specifications and dimensions for the generator, engine, cooling and fuel systems.
- Optional accessories that can be added are also outlined.
With an installed base of more than thousands of systems, Perkin-Elmer was a leading supplier of sputter deposition equipment for high technology application in 1990's. The Perkin-Elmer 4400 Series, fully refurbished and upgraded by Allwin21 Corp., were designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every fully refurbished and upgraded Perkin Elmer sputtering system was supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
Perkin-Elmer 4400, 4410, 4450 Proven Sputter Materials:
Al+W ,Cr/SiO2,SiC ,Ti+Au,InSnO ,SiO2 ,Ti/W ,Ti+Au+Ni,Al2O3 ,Mo ,SiO2+O2 ,Ni/Fe+Cu+SiO2,Ag MoSi2 ,Si+N2(Si3N4) ,Ti/W+Au,Au ,Mo2Si5 ,Si+N2+B4C, Ti/W+Au+Ta, C, Mo5Si3 ,Ta ,Ti/W+Al/Si,Cr Ni ,TaC, Ti/W+Ni/Cr+Au,Cr/Co ,Ni/Cr, Ta+Au , Ti/W+Pt,Cr/Au, Ni+Ni/Cr, TaSi2 ,Al+Ti/W+Ag, Cr+Cu, Ni/Fe ,Ta+SiO2 , W+Al2O3,Cr/Si ,Pt, Zr ,Zn,Cr/SiO, TiO2 ,TiO2+Cr, ZnO2
Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
Cooling capacity: 51.1 ÷ 306.6 kW
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants
This document provides a product inventory for SpicePark in September 2019. It consists of three sections:
1) An overview showing the total inventory of 5,058 pieces categorized by product type with semiconductors making up 75% of the inventory.
2) A breakdown of the 451 pieces of general purpose rectifier diodes listing the manufacturer and number of pieces for each.
3) Details for one type of general purpose rectifier diode including the part number, manufacturer, thermal rating and remarks for 160 individual parts.
This document provides a product inventory for SpicePark in July 2019. It consists of tables listing the various components in their inventory, including the number of pieces of each part. The largest category is semiconductors, making up 75% of the total inventory of 5,038 pieces. Other categories include passive parts, batteries, mechanical parts, DC motors, and lamps.
This document provides a parts list and inventory for SpicePark, a company that sells semiconductor, passive, battery, mechanical and other electronic components. It includes a breakdown of the company's product categories by percentage of total stock. Lists of individual part numbers, descriptions and quantities are provided for semiconductor diodes and other common electronic parts. The document appears to be SpicePark's internal inventory and sales report from June 2019.
This document discusses heart rate variability (HRV) analysis techniques including time domain, frequency domain, and non-linear analyses. It provides examples of HRV analyses on data collected from tilt table tests and baroreflex sensitivity tests using nitroglycerin and phenylephrine drugs. Graphs show changes in heart period and interbeat interval over time during the tests and frequency domain analyses breaking down power in very low, low, and high frequency bands.
This document provides information on decade and binary counters from National Semiconductor, including the DM5490, DM7490A, and DM7493A models. It contains specifications, pinout diagrams, logic diagrams, and truth tables for the counters. The counters can be used for divide-by-ten counting in BCD format or divide-by-five/eight binary counting. They have features such as master-slave flip-flops, gated zero reset, and maximum operating frequencies of 32-42MHz.
This document provides specifications for a 1600REOZM generator set including:
- Ratings for standby and prime power output between 1380-1630 kW
- It is a 4-cycle, turbocharged diesel generator set with a 60Hz or 50Hz output
- Standard features include a one-year warranty, EPA emissions compliance, and digital voltage regulation
This document provides information on semiconductor products in the SpicePark 2019 catalog. It includes a breakdown of the product mix showing semiconductors make up 75% of the catalog. Lists of various semiconductor part numbers, descriptions and quantities are provided for diodes, transistors, ICs and other components. Specifications like manufacturer, thermal rating and remarks are given for many general purpose rectifier diodes.
This document provides technical specifications for Daikin outdoor units for pair application using R-407C refrigerant.
It includes specifications for several models ranging from R25 to RP250 in cooling capacity. Dimensions, weights, materials, sound levels, fan specs, heat exchanger details, refrigerant circuits, compressor types, electrical data and safety devices are provided for each model. Electrical diagrams and installation guidelines are also included.
This document provides information on semiconductor products available from Bee Technologies in May 2019. It includes a breakdown of the company's product stock by category, with semiconductors making up 75% of the total 5,006 pieces. Lists then provide details on each semiconductor product, including part numbers, manufacturers, thermal ratings, and remarks.
This document provides technical specifications for a 750 kVA diesel generator set including:
1) Generator output voltages and frequencies at 50Hz and 60Hz, motor starting capabilities, and alternator performance data.
2) Protections and features of the generator controller.
3) Engine specifications including model, displacement, emissions compliance, and fuel consumption rates.
4) Dimensions and shipping data for the generator enclosure.
5) Cooling system details including radiator specifications and cooling airflow.
This document provides preliminary datasheet information for the RJP60V0DPM 600V-22A IGBT. Key specifications and features include:
- High breakdown voltage of 600V with low collector-emitter saturation voltage of 1.5V typical.
- Short circuit withstand time of 6 microseconds typical.
- Trench gate and thin wafer technology.
- Maximum ratings, electrical characteristics, switching characteristics and thermal characteristics are provided.
ASCO Numatics Valve Redundant Control System, RCS, Pilot Valve System, Sil 3Thorne & Derrick UK
The document describes a Redundant Control System (RCS) that provides complete functional safety and enhanced reliability for process control applications up to SIL 3. The RCS uses a redundant, fault-tolerant architecture with no single point of failure to prevent unwanted closure of a process valve. It can be implemented with or without an onboard diagnostic processor. The RCS is available in normally closed, normally open, and double acting configurations to suit different process safety requirements. It provides automated partial stroke testing of valves for diagnostics.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
Semiconductor equipment parts may 2020 part1Emily Tan
The document lists 153 items for sale including various used semiconductor fabrication equipment parts and components. Items include vacuum pumps, RF generators, wafer handling equipment, optical inspection systems, and numerous circuit boards and other spare parts for various etch, deposition, and lithography systems. The seller is Semistar Corporation and they can be contacted via email for availability and pricing.
Semiconductor equipment parts in stock-SSe-0141Emily Tan
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
Ba Ria Thermal Power Joint Stock Company operates two gas turbine power plants and two steam turbine power plants in Ba Ria, Vietnam, producing a total of 388.9 MW of power. The company was established in 1992 and provides power generation, equipment maintenance and repair, and water treatment services. It has extensive workshops and equipment for mechanical, electrical, and calibration services.
Semiconductor equipment spare parts in usa may 20th 2020Emily Tan
This document contains a list of 148 items for sale including components for semiconductor equipment such as mass flow controllers, vacuum components, RF matching networks, microwave generators, ion implanters, wafer handling equipment and more. The items are from various manufacturers including AMAT, ASTEX, Axcelis, Brooks Automation, BOC Edwards and others.
Semiconductor equipment spare parts in usa may 20th 2020Emily Tan
This document contains a list of 148 items for sale including components for semiconductor equipment such as mass flow controllers, vacuum components, RF matching networks, microwave generators, ion implanters, wafer handling equipment and more. The items are from various manufacturers including AMAT, ASTEX, Axcelis, Brooks Automation, BOC Edwards and others.
The document lists various types of semiconductor fabrication equipment including:
- Plasma etchers such as the Applied Materials Plasma II and Lam AutoEtch 590.
- Thin film deposition equipment such as the AMAT AMP-3300 PECVD and Emscope SC-650 Series.
- Mask aligners including the Canon PLA-501 F and Neutronix PLA 500/501.
- Wet benches, plasma ashers, chillers, ovens, rapid thermal processing equipment, coat/develop/bake tools, metrology systems, and miscellaneous parts.
This document summarizes the contents of a Spice Park, which is a collection of electronic components. It shows that in December 2018, the Spice Park contained 4,941 total pieces, with the majority being semiconductors at 75%. The document provides a breakdown of the quantities of different component types in the park. It also lists detailed part numbers and specifications for general purpose rectifier diodes. The Spice Park quantity is regularly updated monthly.
Caliber Test & Measurement Rental CatalogAaron Fugita
Our goal is to help you meet your customers expectations and grow your business more profitably. Caliber has all of the top brand names, the latest models and the deepest inventory to ensure you have what you need when you need it. If you don’t see what you are looking for don’t hesitate to ask as we may have it on order already or we can find it for you.
Caliber Test & MEasurement Rental CatalogAaron Fugita
Caliber Test & Measurement offers the largest rental inventory in the Rocky Mountain Region from handheld test equipment to high voltage test sets and even Network instrumentation.
This document provides a summary of the contents of Spice Park in May 2018. Spice Park contains a total of 4,828 electronic components, with semiconductors making up 75% of the inventory. The document includes tables listing the various semiconductor, passive, battery, and mechanical parts in Spice Park along with their quantities. It also provides an update to the diode/general purpose rectifier section where the quantity of one part from Toshiba was increased by 10 pieces.
Leading supplier of gas steam turbine engineering services and we provide operational maintenance services, Gas turbine parts, inspection kits, and on site engineering services.
The document lists various medical equipment spare parts including their part numbers, quantities, unit prices, and total prices. It includes spare parts for ventilators, patient monitors, pulse oximeters, anesthesia machines, incubators, and other devices. A total of over 100 different spare parts are listed along with information about the equipment they are compatible with.
The engineering design drawings and documentation are to control the temperature and pressure of a water cooling system using a PLC and HMI. The system has two runs - a hot water run and cool water run, each with tanks. In the hot water run, hot water is pumped and cooled in towers before returning to the cool tank. In the cool run, cool water is pumped to a process and returned heated. The PLC monitors temperatures and pressures and controls pumps and fans to maintain the desired levels. Electrical schematics, I/O modules, and ladder logic are provided to interface the mechanical system with the PLC and HMI control panel.
This document provides information on general purpose rectifier diodes in Spice Park's inventory in January 2019. It contains a table listing 14 manufacturers that provide 441 total diodes. The majority are from Toshiba (135 diodes) and INTERSIL (118 diodes). For each diode part number, details are given on the manufacturer, model type, thermal characteristics, and last update date.
Design and Footprint of LH2 Supplied Refueling.pdfssuserbd5784
1. The document discusses the design and footprint requirements for liquid hydrogen refueling stations located on urban sites. It examines different methods for supplying hydrogen, including delivery via liquid hydrogen tanker trucks, compressed gas cylinders, and on-site hydrogen production.
2. The document provides process flow diagrams and piping and instrumentation diagrams showing the major equipment needed for a liquid hydrogen refueling station, including storage tanks, compressors, chillers, dispensers, and associated piping and instrumentation. Safety equipment like flame detectors and pressure relief valves are also shown.
3. Recent changes to NFPA fuel gas codes have reduced some minimum separation distance requirements for liquid hydrogen stations, allowing for more compact footprints. However,
This document describes a batching and loading system for furnaces that includes several components:
- Calibration devices, weigh modules, and hopper scales to measure materials like sinter coke, iron ore additives
- SIMATIC IPC and engineering systems like Sitop, UPS1600, UPS1100 to control the loading process
- An electric control cabinet with a CPU, I/O modules, and HMI to interface between weighing equipment and furnace loading via Profibus DP and Profinet networks
Test & Measurement 2016 Product Catalog Chromasea_cvn
This document is Chroma ATE's 2016 product catalog. It contains over 200 test and measurement products organized by functional index and model index. New products are marked with an asterisk. The catalog covers solutions for industries like semiconductor/IC testing, battery testing, passive component testing, electrical safety testing, and more. It also lists Chroma ATE's global operation sites.
The document describes a Spice Park product database that is regularly updated. It contains details of 4,930 parts across various categories as of the November 2018 update. The bulk of the parts are semiconductors (75%), with smaller portions of passive parts (12%), batteries (10%) and other components. It then provides a more detailed breakdown of the 430 general purpose rectifier diodes in the semiconductor category.
Similar to Semiconductor equipment in USA May 26 2020 (20)
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
The document lists various used plasma etch, stripper, and asher equipment for sale from Semistar Corp., ranging in price from $9,500 to $175,000. The most expensive items are a Matrix 209S plasma asher for $175,000 and a Matrix 105 plasma asher for $98,000, while several Branson and Matrix plasma ashers and etchers are listed at $12,500, $22,500, and $29,500. Semistar Corp. sells used semiconductor equipment and provides parts and service in the U.S.
Plasma etcher rie icp drie bosch process equipmentEmily Tan
This document lists various used semiconductor fabrication equipment for sale, including plasma etchers, reactive ion etchers (RIE), and asher systems from manufacturers like STS, Lam Research, Oxford Instruments, ICP Bosch, and Tegal. The prices range from $275,000 for a Lam Research 4420 plasma etch tool down to $9,500 for a Yield Engineering Systems dry asher. Models include STS Multiplex ICP systems, Lam AutoEtch and Rainbow tools, Oxford Plasmalab RIEs, and various plasma etchers and asher systems from Tegal, Matrix, Plasma Therm, and others.
This document lists several plasma deposition equipment items for sale including their manufacturer, model, type, and price. The most expensive items are a $79,500 Plasma Therm 790 Series PECVD system and a $77,500 Oxford Instruments Plasmalab 80+ DPCVD system. Also listed are lower cost plasma etchers and deposition systems starting at $5,000 from Oxford Plasma Technology.
This document lists various oven and furnace models from different manufacturers along with their prices, ranging from $1,200 to $3,980. It provides contact information for Semistar Corp, a company that sells semiconductor equipment parts and services in the US.
Metrology probe tester equipment instrumentEmily Tan
This document lists various semiconductor manufacturing equipment for sale, including their prices. The most expensive items are an electron beam lithography system for $1,000,000 and an X-ray diffraction system for $78,000. Other listed equipment include wafer probers, thin film measurement systems, surface profilers, and microscopy tools, with prices ranging from $35,000 to under $5,000. The document appears to be from a company called Semistar Corp that sells used semiconductor equipment.
The document lists several used mask aligners for sale from Semistar Corp, including various Canon Neutronix and PLA models priced between $18,500 to $35,000. Contact and company information is provided at the bottom for Semistar Corp, which sells semiconductor equipment parts and used mask aligners in the United States.
This document lists various electron beam evaporators and thermal evaporators for sale from multiple manufacturers including CHA Industries, Temescal, Varian, TES, Airco Temescal, and Kurt J Lesker. The prices range from $145,000 for some combined e-beam and thermal evaporators from Varian and CHA Industries down to $18,500 for older model Varian e-beam evaporators. Contact information is provided for Semistar Corp. regarding sales of semiconductor equipment parts and services.
This document lists equipment for sale from various manufacturers for semiconductor wet processing including batch developing stations, plating equipment, wet benches, and spin dryers priced between $1,980 to $35,000. Key items include a BOLD batch developing station for $35,000, an EEJA manual plater for $35,000, a Gold Techni plating bath system for $15,000, and various wet process equipment from APT and Wet Process Equipment between $7,500 to $9,500.
This document lists various sputtering systems and their prices from different manufacturers including Perkin-Elmer, Materials Research Corporation, Temescal, CPA, and CVC Products. The most expensive systems are three Perkin-Elmer models ranging from $125,000 to $155,000, while the cheapest option is a CVC Products system at $12,500. Contact information is provided for Semistar Corp for additional semiconductor equipment parts and services.
This document contains an inventory list of 215 items located in either Nanjing, China or Morgan Hill, CA USA. The majority of the items are various types of process equipment used in semiconductor manufacturing, including bonders, chillers, coaters, CVD tools, developers, etchers, evaporators, furnaces, metrology equipment, ovens, PECVD tools, plasma ashers, pumps, RTP tools, sputtering systems and more. The items are from various manufacturers such as K&S, SMC, SVG, SOLITEC, PlasmaLab, BOLD, Temescal, Varian, Ditector, CANON, Nanometrics, Gaertner Scientific, Rudolph Research
Used SMT & PTH &ATE assembly equipment inventoryEmily Tan
Used SMT & PTH &ATE assembly equipment inventory:Pls eamil us for the availability of the Used SMT & PTH &ATE assembly equipment. Appreciate your time!
Electronic test equipment, Oscilloscope, Spectrum, Analyzer ,DMMEmily Tan
Electronic test equipment Oscilloscope Spectrum Analyzer DMM:The following items (ID-SS8267-1-1) are subject to prior sale without notice. These items are only for end users.
Lam Research ,Novellus, Gasonics, Tel ,Tokyo Electron Ltd, Matrix etc. Spare ...Emily Tan
Lam Research Novellus Gasonics Tel Tokyo Electron Ltd Matrix etc. Spare Parts:The items are subject to prior sale without notice. These items are only for end users.
Semiconductor Equipment:Please us for more info and availability. They are subject to prior sale without notice.These items are only for end users. Appreciate your time! sales@semistarcorp.com . ID-8032-1-1
Semiconductor Equipment Inventory.Please email us for more info/ the availability of these equipment. These are subject to prior sale.Appreciate your time! sales@semistarcorp.com
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Trusted Execution Environment for Decentralized Process MiningLucaBarbaro3
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdfflufftailshop
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
4. The Items are subject to prior sale without notice. Appreciate your time. sales@semistarcorp.com
ID-8412-0-1 4 www.semistarcorp.com
130 ESP300-11N111
131 Keithley Instr- 236 Source Measure Unit
132 HP 8112A & Xantrex XFR35-35
133 SRD07 Versatile -Semitool Quick Disconnect Rotor
134 UDT: Photometric Sensor Head, Focus Mount
135 4020: Mass Group: Laser Scanner 1D (RV-1000)
136 Fisher- IKA Eurostar Power Control/Visc Stirrer
137 Melectron Detector-25mm Probe/Digital Joulemeter
138 Canon EOS Digital Camera
139 KE 236 Source Measure
140 Tekronix TDS 2024-Digital Storage Scope 200mhz
141 H-Square Corp- 6' Horizontal Mask Transfer Station
142 EVAPDEP07 Thin film deposition monitor- 2 channel
143 Keithley- 2 Quad 1x10 Mulitplexer Cards/Connectors
144 Keithley- 2 Quad 1x10 Mulitplexer Cards/Connectors
145 4020: Synergy- ISP-250B SV Dry Pump Single Phase
146 Inficon- Transpector XPR 2 Gas Analysis System
147 ULTRASONIC01 Branson w/controller
148 80-Channel Switch Systems
149 Keithley- 2400 Digital Sourcemeter
150 HP34401A Multimeter
151 Dovebid- Photo Research WC-704 Power Supply
152 PR-2302 Calibrated Light Source
153 ULTRASONIC04 Branson w/controller
154 Cooke Corp- CAL-SPOT 400
155 Optical Associates- UV Probe 365/400mm
156 Harvard Appar- PhD 22/2000 Advanced Syringe Pump
157 EVAPDEP06- Mbraun Evaporator Spares
158 Wenesco Hotplate HP86U
159 Wenesco Hotplate HP86U
160 PR-650 Spectometer / LIV Tester
161 Metrohm 861 Advan Compact Ion Chromatograph
162 Gas Chromatograph Mass Spectroscopy
163 HRC Products- Bright Light Box
164 PR-2302 Luminance
165 Keithley Inst- 10 Slot Switch Mainframe
166 Keithley Instruments Switch
167 Keithley Inst- (2) Quad 1x10 Multiplexer Card
168 Keithley 2420 Source Meter
169 HP LF Impendance Analyzer
170 Keithley Inst- 236 Source Measure Unit
171 HP Universal Source
172 HP UV Vis Diode Array SP
5. The Items are subject to prior sale without notice. Appreciate your time. sales@semistarcorp.com
ID-8412-0-1 5 www.semistarcorp.com
173 HP High Resistance Meter
174 Oriel Crop Arc Lamp w/ filter & mou
175 Graseby Optronics Optometer
176 HP Universal Source
177 Oriel Corp Spectrometer
178 Tovar Industries- Laboratory Table
179 Keithley-10-Slot Switch Mainframe
180 PLASMA09 Denton Desk II sem prep
181 Labsphere- Integrating Sphere
182 SCRIBE02 Bartell Corp manual scribe bay 200
183 Keithley Inst- 7001 High Density Switch System
184 Keithley- 20 Channel Relay Switch Card
185 Scientific Equip-Spectra Physics SP8700
186 Keithley- 10-Slot Switch Mainframe 1x10 Multiplexe
187 Vibr. Isolation Table/Acoustic- Digital Instr.
188 MACHTOOL01 Tennsmith Sheetmetal Shear
189 Residual Gas Analyzer Model RGA200
190 Newport Translation Roation
191 Byk Gardner D1060, 120
192 Frey Electro-Mech- 4 UDT-VCC Card Racks
193 Keithley Instruments- 4 Quad 1x10 Multiplexer Card
194 Keithley Multiplexer Card
195 Heat Systems- Sonicator
196 Fisher Scientific- Analytical Balance AE100
197 EG&G- Electrochemical Analysis System
198 Hewlett Packard- Digital Multimeter
199 American Ultraviolet Co. Ultraviolet Lamp
200 Keithley- Source Measure Unit
201 Keithely Instruments, Switch System
202 Keithely Instruments, Multiplexer Card
203 Helmig Engineering-40 Channel Current Src.
204 Branson-Power Supply
205 Lock-in amplifier
206 Optical Table
207 Keithley 220 Current Source
208 Digital MultiMeter HP3478A
209 Newport 780 Tungsten Lamp + Power Supply
210 Optical Power Meter
211 High current source meas
212 Waveform Synth/Function Gen
213 AG Heinze- Rectangular Mech. Stage for FX-A
214 PULNIX Multi Sync Monitoror
215 ULTRASONIC05 Branson w/controller
6. The Items are subject to prior sale without notice. Appreciate your time. sales@semistarcorp.com
ID-8412-0-1 6 www.semistarcorp.com
216 Keithley- 3A Sourcemeter (Pixel Visual Insp Stn)
217 Ocean Optics-UV/VIS Spectrometer/Reflection Probe
218 UVCLEAN02 UVO Cleaner Model 256
219 Dovebid- Keithley Parametric Test Station
220 IS4040A 40-channel current source
221 IS4040A 40-channel current source
222 IS4040A 40-channel current source
223 IS4040A 40-channel current source
224 IS40100 40-channgel current source
225 IS40100 40-channgel current source
226 IS40100 40-channgel current source
227 IS40100 40-channgel current source
228 IS40100 40-channgel current source
229 IS40100 40-channgel current source
230 IS4040B Current Source
231 IS4040B Current Sourceer
232 IS4040B Current Source
233 IS4040B Current Source
234 IS4040B Current Source
235 IS4040B Current Source Units
236 IS4040B Current Source Units
237 IS4040B Current Source Units
238 IS4040B Current Source Units
239 Calibration Equipment for Multi Nozzle Printer-DNS
240 IS40100B Current Source
241 IS40100B Current Source
242 IS40100B Current Source
243 IS40100B Current Source
244 Power Supplies for Life Test System-
245 Power Supplies for Life Test System-
246 IS40100B Current Source
247 IS40100B Current Source
248 IS40100B Current Source
249 Rework and Repair Station-Newark Electronics