CDI manufactured a standards based encryptor for the financial industry that has been shipped worldwide since 1980. This industry gradually changed focus to the internet, although some of this equipment is still in use.
This document discusses utilizing unidirectional security gateways to achieve cyber security. It introduces Waterfall Security Solutions, which provides unidirectional gateway technology. These gateways allow information to flow from protected industrial networks to external networks like business networks, preventing any return path for attacks. The document outlines the need to protect critical infrastructure from cyber threats and presents scenarios where gateways can help. It then reviews limitations of traditional IT security practices and how the Waterfall solution meets best practices. Real-world use cases and benefits like compliance, cost recovery and support for industrial applications/protocols are also covered.
Unidirectional Security, Andrew Ginter of Waterfall Security Digital Bond
This presentation reviews the spectrum of perimeter solutions based on unidirectional technology - solutions that are being deployed to protect the safety and reliability of industrial control systems. Learn why the technology is truly unidirectional based on physics and different ways it can be used in SCADA and DCS.
Many practitioners find parts of the spectrum to be counter-intuitive. Further, some parts of the spectrum are straightforward to deploy, and others require that practitioners take some care to ensure that the results really are as strong as they should be. Technologies and techniques covered include unidirectional gateways, secure bypass, temporary/programmed gateway reversals, opposing gateways, secure remote access, and parallel operations and IT WANs.
The document discusses Defender vehicle management systems that monitor lift truck impacts and provide tools to promote safety, accountability, and productivity. The Defender systems go beyond just impact recognition by ensuring individual accountability, creating a best practice safety culture, and providing tools to avoid investigative situations and ensure compliance with OSHA regulations. The Defender IM2 and IM3 systems offer different data communication platforms, including USB extraction, LAN webpage access, and email notifications, to provide fleet data and impact reports for fleets of all sizes.
Robust Cyber Security for Power UtilitiesNir Cohen
The security of critical networks is at the center of attention of industry and government regulators alike. Check Point and RAD offer a joint end-to-end cyber security solution that protects any utility operational technology (OT) network by eliminating RTU and SCADA equipment vulnerabilities, as well as defends against cyber-attacks on the network’s control and data planes. This solution brief explains how the joint solution enables compliance with NERC-CIP directives, provides deep visibility and control of ICS/SCADA communications, and allows secure remote access into OT networks.
The document discusses Juniper network solutions for financial organizations. It outlines key network architecture requirements for financial services including segmentation, security, performance, and high availability. It then describes Juniper products that can meet these requirements, including routers, firewalls, VPN appliances, and application acceleration solutions.
Routeco cyber security and secure remote access 1 01RoutecoMarketing
There is typically a 15:1 ratio of industrial devices to enterprise devices within a manufacturing plant. The industrial internet of things presents opportunities for growth but also increased risks of disruption through threats like theft, natural disasters, unauthorized access, and malware. A defense-in-depth security approach is recommended, incorporating physical security, network segmentation, firewalls, authentication, and monitoring to protect industrial control systems.
This document provides an overview of SCADA (Supervisory Control and Data Acquisition) security challenges and strategies. It describes common SCADA system components and functionality. It then discusses increasing cyber threats to SCADA systems from sources like hostile governments and employees. The document outlines various physical and cyber vulnerabilities in SCADA systems and components. It recommends security standards from organizations like NIST, ISA, and NERC to help mitigate risks. The document also provides guidelines on physical asset security and cybersecurity strategies.
This document discusses utilizing unidirectional security gateways to achieve cyber security. It introduces Waterfall Security Solutions, which provides unidirectional gateway technology. These gateways allow information to flow from protected industrial networks to external networks like business networks, preventing any return path for attacks. The document outlines the need to protect critical infrastructure from cyber threats and presents scenarios where gateways can help. It then reviews limitations of traditional IT security practices and how the Waterfall solution meets best practices. Real-world use cases and benefits like compliance, cost recovery and support for industrial applications/protocols are also covered.
Unidirectional Security, Andrew Ginter of Waterfall Security Digital Bond
This presentation reviews the spectrum of perimeter solutions based on unidirectional technology - solutions that are being deployed to protect the safety and reliability of industrial control systems. Learn why the technology is truly unidirectional based on physics and different ways it can be used in SCADA and DCS.
Many practitioners find parts of the spectrum to be counter-intuitive. Further, some parts of the spectrum are straightforward to deploy, and others require that practitioners take some care to ensure that the results really are as strong as they should be. Technologies and techniques covered include unidirectional gateways, secure bypass, temporary/programmed gateway reversals, opposing gateways, secure remote access, and parallel operations and IT WANs.
The document discusses Defender vehicle management systems that monitor lift truck impacts and provide tools to promote safety, accountability, and productivity. The Defender systems go beyond just impact recognition by ensuring individual accountability, creating a best practice safety culture, and providing tools to avoid investigative situations and ensure compliance with OSHA regulations. The Defender IM2 and IM3 systems offer different data communication platforms, including USB extraction, LAN webpage access, and email notifications, to provide fleet data and impact reports for fleets of all sizes.
Robust Cyber Security for Power UtilitiesNir Cohen
The security of critical networks is at the center of attention of industry and government regulators alike. Check Point and RAD offer a joint end-to-end cyber security solution that protects any utility operational technology (OT) network by eliminating RTU and SCADA equipment vulnerabilities, as well as defends against cyber-attacks on the network’s control and data planes. This solution brief explains how the joint solution enables compliance with NERC-CIP directives, provides deep visibility and control of ICS/SCADA communications, and allows secure remote access into OT networks.
The document discusses Juniper network solutions for financial organizations. It outlines key network architecture requirements for financial services including segmentation, security, performance, and high availability. It then describes Juniper products that can meet these requirements, including routers, firewalls, VPN appliances, and application acceleration solutions.
Routeco cyber security and secure remote access 1 01RoutecoMarketing
There is typically a 15:1 ratio of industrial devices to enterprise devices within a manufacturing plant. The industrial internet of things presents opportunities for growth but also increased risks of disruption through threats like theft, natural disasters, unauthorized access, and malware. A defense-in-depth security approach is recommended, incorporating physical security, network segmentation, firewalls, authentication, and monitoring to protect industrial control systems.
This document provides an overview of SCADA (Supervisory Control and Data Acquisition) security challenges and strategies. It describes common SCADA system components and functionality. It then discusses increasing cyber threats to SCADA systems from sources like hostile governments and employees. The document outlines various physical and cyber vulnerabilities in SCADA systems and components. It recommends security standards from organizations like NIST, ISA, and NERC to help mitigate risks. The document also provides guidelines on physical asset security and cybersecurity strategies.
Andrew Ginter, Waterfall's VP Industrial Security speaks to three networks at the DHS ICSJWG 2019 event in Springfield, MA. Secure sites, however, generally do not use three security standards - two are unavoidable and three is two too many.
Presented by: Rune Volden, R&D Manager, Ulstein Power & Control AS
This talk will focus on where we were last year, how we overcome challenges and what's coming up. The way our component suppliers have adapted to our system setup is quite amazing. This enables us to apply a clean architecture based on DDS, with clear responsibility in terms of liability issues. Redundancy in hardware solution and flexibility in size, realtime capability and scalability is changing the way we do system integration for present and future needs.
The document discusses whether patching control systems is an effective security practice given the challenges of securing industrial control systems. It makes three key points:
1. Patching insecure-by-design devices provides minimal risk reduction since attackers can achieve their goals by exploiting legitimate system features rather than vulnerabilities.
2. Most industrial control systems operate within an insecure-by-design zone, so patching may not prevent attacks since attackers do not need to exploit systems to cause damage.
3. Many control system components have low impact even if compromised, so patching provides little benefit given the effort. Prioritizing patching for systems directly accessible from untrusted networks is recommended over broadly patching everything.
Attacking and Defending Autos Via OBD-II from escar AsiaDigital Bond
This document discusses security issues related to accessing and controlling vehicles via OBD-II ports, drawing comparisons to struggles securing industrial control systems. It notes that accessing these systems often means compromising them, as protocols were designed without security. While an analysis of a Progressive Snapshot dongle found no security precautions, lessons from securing critical infrastructure suggest restricting access and implementing least privilege. The document advocates learning from past ICS mistakes to develop secure vehicle protocols and modules.
The document discusses securing industrial control systems (ICS) infrastructure for compliance with NERC CIP standards and beyond. It outlines the network security challenges for bulk power systems in meeting compliance standards while balancing performance and costs. Real-world security vulnerabilities are described from assessments done by the GAO and Department of Energy. The paper then explains how a unified threat management approach using a single security platform can help simplify NERC compliance by providing firewall, VPN, antivirus, IPS, and authentication capabilities required without needing separate point products. This integrated solution secures the infrastructure while maintaining performance.
Tatsuaki Takebe of Yokogawa Electric Corporation provides the closing keynote with a focus on international standards activity and how it affects the Japanese ICS community.
CCNA 1 Routing and Switching v5.0 Chapter 11Nil Menon
This document provides an overview of Chapter 11 from a Cisco Systems networking textbook. The chapter covers topics related to small network design including common devices, protocols, and security considerations. It also discusses techniques for evaluating network performance such as ping and traceroute commands. The document provides examples of show commands to view device settings and configuration files. Overall, the summary provides an introduction to key concepts for planning, implementing, managing and troubleshooting small networks.
Air defense wireless_vulnerability_assessement_module_spec_sheetAdvantec Distribution
The document describes Motorola's Wireless Vulnerability Assessment module. It allows remote testing of wireless network security by automatically logging into access points and simulating a hacker to identify vulnerabilities. This eliminates expensive on-site security scans. The module integrates with Motorola's AirDefense Services Platform to provide centralized and comprehensive wireless vulnerability testing across entire networks. It helps validate firewall policies and identify potential entry points to protect sensitive wired systems and data.
Isf 2015 continuous diagnostics monitoring may 2015abhi75
Northrop Grumman presented on applying continuous monitoring and cyber best practices to the Texas Cybersecurity Framework. They discussed features of a proposed dynamic cyber dashboard for Texas that would provide interactive visual analytics on security controls, vulnerabilities, threats and compliance. The dashboard would use advanced analytics, predictive modeling and a quality of protection metric to continuously measure cyber risk.
Industrial control systems (ICS), including SCADA systems, were originally designed without security features when networks were isolated. However, they are now interconnected and vulnerable to cyber threats. Recent attacks like Stuxnet have caused significant infrastructure disruption. Fortinet and Nozomi Networks provide a joint solution to secure ICS by combining Nozomi's ICS monitoring capabilities with Fortinet's firewalls to segment networks and detect and respond to anomalies. This integrated approach scales to large ICS deployments for comprehensive protection.
C&W provides a variety of managed security and network solutions to help organizations protect against threats. These include managed SIEM, DDoS protection, IPS, email security, endpoint security, server penetration testing, strong authentication, WAF, UTM, and business MDM to control mobile devices and expenses. Additional offerings include retail analytics, education workplaces, traffic management, Netscaler, contact centers, unified communications, digital signage, and office phone systems.
This document is a resume for Michael L Sawall that summarizes his experience and qualifications. It outlines his IT certifications and over 15 years of experience providing tier 1 and tier 2 technical support across various industries. His background includes imaging, troubleshooting, and repairing various devices as well as managing user accounts, security tools, and technical staff.
ICS Security from the Plant Floor Up - A Controls Engineers Approach to Secur...Digital Bond
The presentation covers assessment, implementation methodology, and current level of success for addressing four key objectives which are protecting the controls fieldbus (networks) from untrusted networks (domain), secure and safe remote support capability from both inside and outside of the company, control supplier access to manufacturing equipment when onsite, and protect manufacturing systems from Malware and intrusion. This system isn’t theoretical, it’s in broad use and full critical production. If the time and connectivity is available a quick remote access demonstration can be given. The presentation will wrap up with a series of thoughts and ideas that occur to me regarding security in general as I listen to other organizations and groups talking about various security needs and activities.
ForeScout CounterACT is a network access control platform that provides visibility, security, and productivity for networks. It identifies devices on the network, including managed and unmanaged devices, and enforces granular policies to automate control of network access. CounterACT is easy to deploy with no software or agents required, and it integrates with existing IT infrastructure. It offers comprehensive network visibility, security, and policy-based access control.
Liam Randall of Critical Stack at S4x15 Operation Technology Day. Liam is a Bro guru and describes how it can be used to monitor communications, detect attacks and analyze data.
VIPER Labs - VOIP Security - SANS SummitShah Sheikh
The document discusses penetration testing of VoIP networks. It describes a VoIP security research lab that investigates attack vectors against VoIP systems. When conducting internal VoIP assessments, the objectives are to understand the call requirements, VLAN configuration, and gain access to the voice VLAN to test for vulnerabilities. Sniffing tools can reveal the voice VLAN ID and credentials. VLAN hopping poses a risk if an attacker can access the voice VLAN from their PC. A case study found an attacker was able to hop VLANs in a hotel network and potentially monitor other guests' phone calls due to poor network segmentation. Proper firewalling of voice networks and limiting remote access to voice VLANs are important lessons learned.
This document discusses security risks to industrial control systems (ICS) and strategies to protect them. It begins by providing examples of security incidents that impacted real-world critical infrastructure facilities. These include production line stoppages due to malware infections and temporary loss of control from unauthorized access. The document then notes that ICS environments are becoming more open and connected, increasing risk. It argues that security approaches for ICS must focus on integrity, availability and confidentiality to account for their mission-critical nature of continuously operating specialized systems. The document advocates implementing network segmentation, carefully managing external devices and updating systems without interrupting operations.
Learn what makes SCADAguardian (the Nozomi Networks flagship technology) so unique and powerful. From enterprise IT, to OT, we enable scalable security strategies for ICS.
Digibury - Ladan Najafi: Introduction to Electronic Assistive TechnologyLizzie Hodgson
The document discusses electronic assistive technology (EAT) provided by the Adult Communication and Assistive Technology Service. The service provides assessments and interventions to help clients communicate and access computers using EAT. This includes environmental controls, communication aids, computer accessibility devices, specialized wheelchair controls, and integrated systems that combine technologies. A successful EAT intervention requires an assessment of the client's needs and abilities, matching them with the appropriate technology, support during learning, and consideration of physical, cognitive, and environmental factors.
The document discusses assistive technologies that can help students with special needs access educational technology. It describes different types of impairments such as vision, hearing, mobility and language. It then outlines various assistive technologies and accessibility features for students with these impairments, including screen readers and magnifiers for visual impairments, captioning and volume control for hearing impairments, ergonomic keyboards for mobility issues, and communication apps for language impairments. The goal is to ensure educational technology is accessible and does not leave behind students with special needs.
The document introduces Jamie Mutch and their responsibilities as an IT Facilitator for the Department of Education, which includes assisting with assistive technologies for students. It then provides examples of different types of assistive technologies that can help students with learning disabilities or those struggling academically in areas like reading, writing, typing. These include text-to-speech, voice recognition, word prediction software, and adapted hardware. The process for accessing assistive technologies through the Department of Education is also summarized.
Andrew Ginter, Waterfall's VP Industrial Security speaks to three networks at the DHS ICSJWG 2019 event in Springfield, MA. Secure sites, however, generally do not use three security standards - two are unavoidable and three is two too many.
Presented by: Rune Volden, R&D Manager, Ulstein Power & Control AS
This talk will focus on where we were last year, how we overcome challenges and what's coming up. The way our component suppliers have adapted to our system setup is quite amazing. This enables us to apply a clean architecture based on DDS, with clear responsibility in terms of liability issues. Redundancy in hardware solution and flexibility in size, realtime capability and scalability is changing the way we do system integration for present and future needs.
The document discusses whether patching control systems is an effective security practice given the challenges of securing industrial control systems. It makes three key points:
1. Patching insecure-by-design devices provides minimal risk reduction since attackers can achieve their goals by exploiting legitimate system features rather than vulnerabilities.
2. Most industrial control systems operate within an insecure-by-design zone, so patching may not prevent attacks since attackers do not need to exploit systems to cause damage.
3. Many control system components have low impact even if compromised, so patching provides little benefit given the effort. Prioritizing patching for systems directly accessible from untrusted networks is recommended over broadly patching everything.
Attacking and Defending Autos Via OBD-II from escar AsiaDigital Bond
This document discusses security issues related to accessing and controlling vehicles via OBD-II ports, drawing comparisons to struggles securing industrial control systems. It notes that accessing these systems often means compromising them, as protocols were designed without security. While an analysis of a Progressive Snapshot dongle found no security precautions, lessons from securing critical infrastructure suggest restricting access and implementing least privilege. The document advocates learning from past ICS mistakes to develop secure vehicle protocols and modules.
The document discusses securing industrial control systems (ICS) infrastructure for compliance with NERC CIP standards and beyond. It outlines the network security challenges for bulk power systems in meeting compliance standards while balancing performance and costs. Real-world security vulnerabilities are described from assessments done by the GAO and Department of Energy. The paper then explains how a unified threat management approach using a single security platform can help simplify NERC compliance by providing firewall, VPN, antivirus, IPS, and authentication capabilities required without needing separate point products. This integrated solution secures the infrastructure while maintaining performance.
Tatsuaki Takebe of Yokogawa Electric Corporation provides the closing keynote with a focus on international standards activity and how it affects the Japanese ICS community.
CCNA 1 Routing and Switching v5.0 Chapter 11Nil Menon
This document provides an overview of Chapter 11 from a Cisco Systems networking textbook. The chapter covers topics related to small network design including common devices, protocols, and security considerations. It also discusses techniques for evaluating network performance such as ping and traceroute commands. The document provides examples of show commands to view device settings and configuration files. Overall, the summary provides an introduction to key concepts for planning, implementing, managing and troubleshooting small networks.
Air defense wireless_vulnerability_assessement_module_spec_sheetAdvantec Distribution
The document describes Motorola's Wireless Vulnerability Assessment module. It allows remote testing of wireless network security by automatically logging into access points and simulating a hacker to identify vulnerabilities. This eliminates expensive on-site security scans. The module integrates with Motorola's AirDefense Services Platform to provide centralized and comprehensive wireless vulnerability testing across entire networks. It helps validate firewall policies and identify potential entry points to protect sensitive wired systems and data.
Isf 2015 continuous diagnostics monitoring may 2015abhi75
Northrop Grumman presented on applying continuous monitoring and cyber best practices to the Texas Cybersecurity Framework. They discussed features of a proposed dynamic cyber dashboard for Texas that would provide interactive visual analytics on security controls, vulnerabilities, threats and compliance. The dashboard would use advanced analytics, predictive modeling and a quality of protection metric to continuously measure cyber risk.
Industrial control systems (ICS), including SCADA systems, were originally designed without security features when networks were isolated. However, they are now interconnected and vulnerable to cyber threats. Recent attacks like Stuxnet have caused significant infrastructure disruption. Fortinet and Nozomi Networks provide a joint solution to secure ICS by combining Nozomi's ICS monitoring capabilities with Fortinet's firewalls to segment networks and detect and respond to anomalies. This integrated approach scales to large ICS deployments for comprehensive protection.
C&W provides a variety of managed security and network solutions to help organizations protect against threats. These include managed SIEM, DDoS protection, IPS, email security, endpoint security, server penetration testing, strong authentication, WAF, UTM, and business MDM to control mobile devices and expenses. Additional offerings include retail analytics, education workplaces, traffic management, Netscaler, contact centers, unified communications, digital signage, and office phone systems.
This document is a resume for Michael L Sawall that summarizes his experience and qualifications. It outlines his IT certifications and over 15 years of experience providing tier 1 and tier 2 technical support across various industries. His background includes imaging, troubleshooting, and repairing various devices as well as managing user accounts, security tools, and technical staff.
ICS Security from the Plant Floor Up - A Controls Engineers Approach to Secur...Digital Bond
The presentation covers assessment, implementation methodology, and current level of success for addressing four key objectives which are protecting the controls fieldbus (networks) from untrusted networks (domain), secure and safe remote support capability from both inside and outside of the company, control supplier access to manufacturing equipment when onsite, and protect manufacturing systems from Malware and intrusion. This system isn’t theoretical, it’s in broad use and full critical production. If the time and connectivity is available a quick remote access demonstration can be given. The presentation will wrap up with a series of thoughts and ideas that occur to me regarding security in general as I listen to other organizations and groups talking about various security needs and activities.
ForeScout CounterACT is a network access control platform that provides visibility, security, and productivity for networks. It identifies devices on the network, including managed and unmanaged devices, and enforces granular policies to automate control of network access. CounterACT is easy to deploy with no software or agents required, and it integrates with existing IT infrastructure. It offers comprehensive network visibility, security, and policy-based access control.
Liam Randall of Critical Stack at S4x15 Operation Technology Day. Liam is a Bro guru and describes how it can be used to monitor communications, detect attacks and analyze data.
VIPER Labs - VOIP Security - SANS SummitShah Sheikh
The document discusses penetration testing of VoIP networks. It describes a VoIP security research lab that investigates attack vectors against VoIP systems. When conducting internal VoIP assessments, the objectives are to understand the call requirements, VLAN configuration, and gain access to the voice VLAN to test for vulnerabilities. Sniffing tools can reveal the voice VLAN ID and credentials. VLAN hopping poses a risk if an attacker can access the voice VLAN from their PC. A case study found an attacker was able to hop VLANs in a hotel network and potentially monitor other guests' phone calls due to poor network segmentation. Proper firewalling of voice networks and limiting remote access to voice VLANs are important lessons learned.
This document discusses security risks to industrial control systems (ICS) and strategies to protect them. It begins by providing examples of security incidents that impacted real-world critical infrastructure facilities. These include production line stoppages due to malware infections and temporary loss of control from unauthorized access. The document then notes that ICS environments are becoming more open and connected, increasing risk. It argues that security approaches for ICS must focus on integrity, availability and confidentiality to account for their mission-critical nature of continuously operating specialized systems. The document advocates implementing network segmentation, carefully managing external devices and updating systems without interrupting operations.
Learn what makes SCADAguardian (the Nozomi Networks flagship technology) so unique and powerful. From enterprise IT, to OT, we enable scalable security strategies for ICS.
Digibury - Ladan Najafi: Introduction to Electronic Assistive TechnologyLizzie Hodgson
The document discusses electronic assistive technology (EAT) provided by the Adult Communication and Assistive Technology Service. The service provides assessments and interventions to help clients communicate and access computers using EAT. This includes environmental controls, communication aids, computer accessibility devices, specialized wheelchair controls, and integrated systems that combine technologies. A successful EAT intervention requires an assessment of the client's needs and abilities, matching them with the appropriate technology, support during learning, and consideration of physical, cognitive, and environmental factors.
The document discusses assistive technologies that can help students with special needs access educational technology. It describes different types of impairments such as vision, hearing, mobility and language. It then outlines various assistive technologies and accessibility features for students with these impairments, including screen readers and magnifiers for visual impairments, captioning and volume control for hearing impairments, ergonomic keyboards for mobility issues, and communication apps for language impairments. The goal is to ensure educational technology is accessible and does not leave behind students with special needs.
The document introduces Jamie Mutch and their responsibilities as an IT Facilitator for the Department of Education, which includes assisting with assistive technologies for students. It then provides examples of different types of assistive technologies that can help students with learning disabilities or those struggling academically in areas like reading, writing, typing. These include text-to-speech, voice recognition, word prediction software, and adapted hardware. The process for accessing assistive technologies through the Department of Education is also summarized.
Technology integration in schools can promote success in the new digital era. While technology has both benefits and drawbacks, its positive outcomes outweigh the negatives. The document argues that technology provides easier access to information, motivates students, and helps those with disabilities. It states the negatives like laziness can be addressed through monitoring and controls, while technology prepares students for the future by engaging them and supporting diverse learners. The conclusion is that technology is not going away and educators must embrace it to engage students and stay relevant in the new digital age.
This document outlines an assistive technology assessment process. It begins with definitions of assistive technology and describes the SETT framework for assessment, which involves examining the Student, Environments, Tasks, and Tools. A case study of a student named Karen is presented to demonstrate how the SETT framework is applied. Assessment steps involving gathering information on the student, environments, and tasks are described. Potential tools are then identified, trials planned, and an implementation process outlined. Resources for finding assistive technology solutions are also listed. The document promotes an ongoing, team-based approach to assistive technology assessment and decision making.
Tami Saito created a personal timeline of her educational experiences and technology use from kindergarten through her current pursuit of a master's degree. She attended schools in Maui from 1994 to 2007 and then the University of Hawaii, where she earned her bachelor's degree in elementary education. Currently enrolled in an educational technology master's program, she hopes to become an elementary school teacher and utilize tools like iPads, smart boards, and online resources in her future classroom.
A joint presentation of Gary Williams of Schneider Electric and Michael Coden of NextNine at the 10th Annual Conference of the American Petroleum institute. The presentation discusses benefits, disadvantages, and architectures for allowing 3rd party access.
Communication Devices, Inc.
Direct "console access" to network routers, firewalls, servers and other systems infrastructure. Connection OUTSIDE the main network bandwidth – via traditional phone circuits, cellular wireless services or secondary private/public IP networks. Power control as necessary to restart or reboot attached components. Security restrictions to prevent outsiders from entering network via an out-of-band connection
The document discusses lift truck impact monitoring systems. It introduces the Defender IM series, which provides more than just impact recognition by promoting accountability, safety awareness, and productivity. The system ensures individual accountability, creates a best practice safety culture, and provides tools to avoid investigative situations and ensure compliance with OSHA regulations. It is a modular system that allows users to select only the needed options and add more over time.
Endpoint security will helps in enhancing protection to corporate networks. It prevents from threats, virus and monitor potential entry in the network. Would you like to know more about the endpoint security working mechanism, then click here https://www.comodo.com/business-enterprise/endpoint-protection/endpoint-security-manager.php
1) The document discusses securing IoT devices and infrastructure through X.509 certificate-based identity and attestation, TLS-based encryption, and secure provisioning and management.
2) It describes securing the cloud infrastructure with Azure Security Center, Azure Active Directory, Key Vault, and policy-based access controls.
3) The document promotes building security into devices and infrastructure from the start through standards-based and custom secure hardware modules.
Friendly Technologies is a leading provider of device management software for IoT/M2M, smart home, and telecom services. Their platform enables automatic device provisioning, firmware updates, and quality of experience monitoring. It also provides analytical insights to service providers. Friendly Technologies has been serving the carrier and service provider market since 1997 and is the most installed unified device management solution worldwide.
Communication Devices, Inc.
Direct "console access" to network routers, firewalls, servers and other systems infrastructure. Connection OUTSIDE the main network bandwidth – via traditional phone circuits, cellular wireless services or secondary private/public IP networks. Power control as necessary to restart or reboot attached components. Security restrictions to prevent outsiders from entering network via an out-of-band connection
Communication Devices, Inc.
Direct "console access" to network routers, firewalls, servers and other systems infrastructure. Connection OUTSIDE the main network bandwidth – via traditional phone circuits, cellular wireless services or secondary private/public IP networks. Power control as necessary to restart or reboot attached components. Security restrictions to prevent outsiders from entering network via an out-of-band connection
Communication Devices, Inc.
Direct "console access" to network routers, firewalls, servers and other systems infrastructure. Connection OUTSIDE the main network bandwidth – via traditional phone circuits, cellular wireless services or secondary private/public IP networks. Power control as necessary to restart or reboot attached components. Security restrictions to prevent outsiders from entering network via an out-of-band connection
The document summarizes a security solution called OTPS that is designed to protect utility control systems from vulnerabilities. It notes that control systems have become more vulnerable as they integrate with corporate networks and use commercial operating systems. The OTPS solution uses security event management, intrusion detection, and other tools to monitor systems for breaches, protect critical infrastructure, and detect and prevent security issues across networks, protocols, processes and system health. It is presented as a customizable, scalable solution to implement security best practices for utility control environments.
The document discusses lift truck impact monitoring systems. It describes the Defender IM series which provides more than just impact recognition by introducing tools to promote accountability, safety awareness, and productivity. It allows users to manage and control impacts, damage, accountability, safety culture, and productivity. The system offers two data communication platforms, the IM2 for smaller fleets using USB extraction, and the IM3 for larger fleets using real-time data access via a network webpage or email notifications.
Cybridge Secure Content Filter for SCADA NetworksGeorge Wainblat
Industrial infrastructures are growing in size and complexity. And it’s all too clear that traditional enterprise IT solutions have not been successful in safeguarding them from
cyber-attack.
They do not meet the best-practice deep-packet inspection capability in the field, nor do they place an emphasis on zone protection network segmentation.
As well, they tend to focus on preventing loss of confidential information, rather than
what really matters in the industrial world – reliability and integrity of the system.In this architecture, a Cybridge is used as a one way content filter gateway which enables the extraction and export of protocol data and information from within the industrial networks, carried upon industrial protocols, to enterprise networks.
This allows safe and easy integration of the machine data coming from the SCADA
network in enterprise reporting and statistical services, within external or public networks without any Cyber-attacks apprehension.
The document discusses lift truck impact monitoring systems. It describes the Defender IM series as a system that provides more than just impact recognition by introducing tools to promote accountability, safety awareness, and productivity. It monitors for impacts as well as ensures individual accountability, creates a best practice safety culture, and provides tools to avoid investigative situations and ensure compliance with OSHA. The system comes in IM2 and IM3 versions, with the IM3 offering additional capabilities like real-time data access via a network webpage or email notifications.
The document discusses lift truck impact monitoring systems. It describes the Defender IM series which monitors impacts and also promotes accountability, safety awareness, and productivity. It does this through tools like ensuring operator accountability, creating a best safety culture, and providing operators tools to avoid issues. The system aims to address why traditional impact systems fail by being too difficult to adjust, not reflecting the application properly, and requiring too much time to manage disruptions.
The document discusses Citadon's hosting services which provide reliable and secure hosting of applications at Citadon's data centers. Key benefits include cost predictability, expertise in hosting Citadon applications, quick implementation without requiring customer IT resources, guaranteed performance levels, scalability, automatic software upgrades, disaster recovery, and lower total cost of ownership compared to self-hosting. Citadon data centers have redundant power and networking provided by Savvis and utilize vaults with advanced security and climate control to house computer equipment. Citadon also provides application security, network security through firewalls, and monitors systems to ensure performance, availability and security.
Friendly Technologies - TR-069, IoT Management, Smart Home Service DeliveryFriendly Technologies
Friendly Technologies is a leading provider of carrier-class device management software for IoT/M2M, Smart Home and Triple Play services. Friendly provides support for TR-069, OMA-DM, LWM2M, MQTT and SNMP, in addition to non-standard protocols. Friendly’s platform enables customers to automatically connect and provision new devices, monitor QoE, configure and update firmware remotely, and streamline their support services, while its server and cloud-based solutions offer data insights to service providers. In 2015 Frost & Sullivan chose Friendly Technologies as a Global Leader in Unified Device and Smart Home Management.
The document outlines the security capabilities of various vendors. It lists vendors and whether they offer solutions that are cloud/premise-based, provide data loss prevention, gateway firewalls/UTM, web/URL filtering, endpoint protection, device recovery, PCI DSS support, secure remote access, auditing/compliance tools, managed services/backup, application monitoring/control, SIEM, integrated intrusion prevention, or mobile device management. Key capabilities include data security, network protection, endpoint protection, compliance, and mobility management.
This document provides information about Medley Marketing Pvt Ltd (MMPL), an IT solutions provider. Some key points:
- MMPL has 30 years of experience in IT and over 50,000 satisfied customers. It provides quality IT products and services across Northern India through over 100 partners.
- MMPL offers thin clients, networking solutions, security products, software, and services. It has expertise in areas like Linux, Windows, servers, storage, and network security.
- MMPL has over 30 trained personnel and a component-level repair center. It provides solutions for sectors like retail, education, healthcare, and more.
- Testimonials provided indicate that MMPL's thin clients have helped
The document provides a matrix comparing security capabilities of various vendors. It lists vendor names and whether they provide cloud and/or on-premise solutions. It also indicates if vendors offer capabilities such as data loss prevention, gateway firewall, web filtering, endpoint protection, device recovery, PCI DSS support, remote access, auditing tools, managed services, application monitoring, intrusion prevention, mobile device management and SIEM. Definitions of each capability are also provided.
Similar to Secure Out Of Band Management - Comm Devices Inc. (20)
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.