This technical seminar report summarizes research on active magnetic bearings conducted by a student as a partial requirement for a Bachelor of Technology degree in Mechanical Engineering. The report was submitted under the guidance of an assistant professor and declares the work as original while acknowledging sources. It expresses gratitude to the college management, head of the mechanical engineering department, and guiding professor for their support in completing the project.

1. A
TECHNICAL SEMINAR REPORT
On
ACTIVE MAGNETIC BEARINGS
This is Submitted in partial fulfilment of the requirement for the award of
The Degree of
Bachelor of Technology
In
Mechanical Engineering
Submitted by
K. DAYANAND REDDY
(15N81A0370)
Under the Guidance of
Mr. CHETAN GHOOLI
Assistant Professor
DEPARTMENT OF MECHANICAL ENGINEERING
SPHOORTHY ENGINEERING COLLEGE
(Approved by AICTE, Affiliated to JNTU, Hyderabad
NAAC Accredited / ISO 9001:2008 Certified)
Nadergul Village, Near Vanasthalipuram, Sagar Road, Saroornagar Mandal-501510
Hyderabad, Telangana
2015-2019

2. i
DECLARATION
The accompanying thesis entitled “ACTIVE MAGNETIC BEARINGS” is submitted for
Bachelor of Technology in Mechanical Engineering at the Sphoorthy Engineering College. I
declare this is my original work done under supervision of Mr. Chetan Ghooli, Assistant
Professor, Sphoorthy Engineering College, Hyderabad. All the work ideas recorded are
original where acknowledged in the text or reference. The work presented here not previously
been submitted for a degree at this or any other, University or Examining body.
KALLEM. DAYANAND REDDY
(15N81A0370)

3. ii
ACKNOWLEDGEMENT
I express our profound thanks to the management of SPHOORTHY
ENGINEERING COLLEGE for providing the facilities in carrying this project.
I express our gratitude to Mr. K.Seshacharyulu, HOD, Mechanical
Engineering Department, for his kind assistance with timely suggestions and
indispensable help, whose corporation has made this project feasible.
I thank our Supervisor, Mr. Chetan Ghooli, Assistant Professor, for his help
and corporation in the successful completion of this project.
Last but not least we thank all the teaching and non-teaching staff members of
Mechanical Department who directly or indirectly helped us in successful completion
of the project.
KALLEM. DAYANANDREDDY
(15N81A0370)