This document appears to be a list of blog posts and articles from a company website about glass laminating and safety glazing. Many of the posts discuss EVA film, which is used as an interlayer in laminated glass production, and techniques for laminating glass, cutting EVA film, and using thermal cutters. Other topics include smart glass films, laminated glass machinery, and glass processing equipment.
Qingdao Morn Building Materials Co., Ltd is a China-based supplier of tempered glass, laminated glass, and insulated glass. The document discusses their laminated glass products, which combine two or more lites of glass with interlayers like PVB, EVA, or SGP. Laminated glass provides acoustic insulation, aesthetic enhancement options, safety in the event of breaking, UV resistance, and can be made into bulletproof glass. Morn has the capability to produce laminated glass from 6mm to 60mm thick and offers PVB interlayers in various thicknesses. They serve as a turnkey supplier for architectural glass projects.
Both laminated glass and tempered glass belongs to safety glass and widely used in our daily life,we introduce the difference between than and suggestions when choosing them
The document introduces the Vinil wallpaper factory in Ukraine. It discusses the factory's 20 years of experience producing high quality wallpaper. The factory uses modern technology and a closed production cycle to produce over 3 million rolls of various types of wallpaper per month, including vinyl, wash-resistant, and hot embossed styles. The factory has certification for quality management and product standards. It distributes products across Ukraine, Europe, and Asia through a large network and truck fleet.
The SGP Thermal Cutter is a handheld device that uses high heat up to 500°C to remove excess SGP material from the edges of laminated glass after the autoclave process, rather than using sharp blades. It heats up within 5-7 seconds and has different blade shapes for various removal jobs. A video demonstration and additional photos of the SGP Thermal Cutter are available on the provided website and YouTube page.
This document appears to be a list of blog posts or articles about safety glass lamination, EVA interlayer films, and related topics. Many of the posts discuss EVA film, thermal cutters, green tape, hot knife trimmers, and the lamination process. Dates range from August 2015 to December 2013. The document promotes safety glass lamination and EVA interlayer films.
This document discusses CNC Glass Interlayer, a company that produces EVA (ethylene vinyl acetate) interlayer films for use in safety glazing laminated glass. The EVA films can be used to laminate decorative glass and provide durability against heat, moisture and UV rays. The company also produces thermal cutters and green tape for trimming laminated glass edges. Contact information is provided for the company and its representative, Peter Lin.
The document discusses EVA interlayer film, which is used to laminate glass for safety glazing. It provides information on EVAFORCE interlayer film's durability against heat, moisture and UV. It also mentions green tape, PET tape and thermal cutters which are used in the lamination process. The document consists primarily of repeated spam-like text and links advertising EVA interlayer film and related products.
The document discusses Teflon mesh used inside silicone vacuum bags for safety glazing lamination. Teflon mesh helps avoid clogging vacuums and protects silicone blankets from glass edges. It also mentions EVA and PVB autoclave lamination processes and provides contact information for the company UCOLIN, which produces silicone vacuum blankets.
Qingdao Morn Building Materials Co., Ltd is a China-based supplier of tempered glass, laminated glass, and insulated glass. The document discusses their laminated glass products, which combine two or more lites of glass with interlayers like PVB, EVA, or SGP. Laminated glass provides acoustic insulation, aesthetic enhancement options, safety in the event of breaking, UV resistance, and can be made into bulletproof glass. Morn has the capability to produce laminated glass from 6mm to 60mm thick and offers PVB interlayers in various thicknesses. They serve as a turnkey supplier for architectural glass projects.
Both laminated glass and tempered glass belongs to safety glass and widely used in our daily life,we introduce the difference between than and suggestions when choosing them
The document introduces the Vinil wallpaper factory in Ukraine. It discusses the factory's 20 years of experience producing high quality wallpaper. The factory uses modern technology and a closed production cycle to produce over 3 million rolls of various types of wallpaper per month, including vinyl, wash-resistant, and hot embossed styles. The factory has certification for quality management and product standards. It distributes products across Ukraine, Europe, and Asia through a large network and truck fleet.
The SGP Thermal Cutter is a handheld device that uses high heat up to 500°C to remove excess SGP material from the edges of laminated glass after the autoclave process, rather than using sharp blades. It heats up within 5-7 seconds and has different blade shapes for various removal jobs. A video demonstration and additional photos of the SGP Thermal Cutter are available on the provided website and YouTube page.
This document appears to be a list of blog posts or articles about safety glass lamination, EVA interlayer films, and related topics. Many of the posts discuss EVA film, thermal cutters, green tape, hot knife trimmers, and the lamination process. Dates range from August 2015 to December 2013. The document promotes safety glass lamination and EVA interlayer films.
This document discusses CNC Glass Interlayer, a company that produces EVA (ethylene vinyl acetate) interlayer films for use in safety glazing laminated glass. The EVA films can be used to laminate decorative glass and provide durability against heat, moisture and UV rays. The company also produces thermal cutters and green tape for trimming laminated glass edges. Contact information is provided for the company and its representative, Peter Lin.
The document discusses EVA interlayer film, which is used to laminate glass for safety glazing. It provides information on EVAFORCE interlayer film's durability against heat, moisture and UV. It also mentions green tape, PET tape and thermal cutters which are used in the lamination process. The document consists primarily of repeated spam-like text and links advertising EVA interlayer film and related products.
The document discusses Teflon mesh used inside silicone vacuum bags for safety glazing lamination. Teflon mesh helps avoid clogging vacuums and protects silicone blankets from glass edges. It also mentions EVA and PVB autoclave lamination processes and provides contact information for the company UCOLIN, which produces silicone vacuum blankets.
The document discusses CNC Glass Interlayer, a company that produces EVA glass lamination interlayer film for safety glazing. It provides contact information and lists the company's product offerings, which include EVAFORCE SUPER+ interlayer film and EVAVISION WHITE film. It also describes the company's EVA film packaging, loading containers, and purified EVA producing line.
The document discusses products for laminating glass, including silicone vacuum bags, teflon mesh, green tape, and EVA (ethylene vinyl acetate copolymer) interlayer films. It provides contact information for the company UCOLIN and lists archives of news posts about their laminating products and processes from September 2015 to April 2011.
The document discusses EVA interlayer film, which is used in laminated safety glass. It provides information on EVAFORCE interlayer film, which has excellent durability against heat, moisture and UV. It also mentions green tape products for use in glass lamination systems, including high temperature masking tape made of PET polyester. The document contains numerous advertisements and contact information for the company cncglass.com which supplies EVA interlayer film and related products.
This document discusses updates to messaging rules for group members on LinkedIn to prevent abuse. It provides a brief overview of improvements to LinkedIn Groups and includes a link to visit the Help Center for more details. The document also contains exchanges between members of a professional group discussing EVA interlayer film for laminated glass, heating and trimming of safety glass, and issues with smart film laminated to glass.
The document discusses using CNC GREEN TAPE to seal the edges of pre-laminated glass during the heating process to prevent overflow of the EVA film. It is recommended to add holes to the GREEN TAPE to allow vacuuming if bubbles form during lamination, but holes are not needed if bubbles do not form. The GREEN TAPE does not leave any residue on the glass after being peeled off.
The document describes how CNC Glass Interlayer packs and ships EVA interlayer film for safety laminated glass. It shows photos of the multi-step packaging process, including vacuum sealing the film, boxing it, and loading containers for shipping. The packaging is meant to protect the film during shipping and storage for customers who purchase large quantities.
Silicone bag for laminated glass machine laminating eva interlayer filmEva Glass
The document discusses silicone bags used for laminating glass with EVA interlayer film. EVA film is made of ethylene vinyl acetate copolymer resin and is used as the interlayer between two pieces of glass to bond them together safely. The EVA vacuum glass laminating machine uses a silicone vacuum bag to laminate glass with EVA interlayer film under heat and vacuum to prevent bubbles. The silicone bags have properties making them suitable for this purpose, such as heat resistance and resistance to EVA.
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt
EVA FILM overflowing through laminated glass edges in the oven when heating.
The document is a website for UCOLIN that sells various products for glass laminating and safety glazing, including silicone vacuum bags, teflon mesh, green tape, and EVA interlayer films. It provides contact information and links to pages on their products, archives of news posts, and a navigation menu to the homepage. The website offers materials for vacuum bag laminating of glass and laminated safety glass production.
The document describes the packaging process for EVA safety interlayer film for laminated glass. The EVA film is first vacuumed bagged, then wrapped in aluminum foil and packed in a carton box, which is then placed in a plywood case and secured with iron ropes. The plywood case provides critical protection for the EVA film during sea shipping.
Processing notes of dry melt adhesive eva interlayer filmEva Glass
The document provides processing notes for using dry melt adhesive EVA interlayer film to produce safety laminated glass. It outlines 8 key points regarding proper handling and processing of the film to ensure quality laminated glass is produced, including testing sample films first, avoiding moisture during production, checking for contaminants on the film surface, using appropriate materials and techniques for different glass types, controlling cooling rates, waiting 24 hours before polishing edges, and polishing glass edges before lamination when using materials that may absorb moisture. Attention to all processing factors is important for successful laminated glass production without defects or waste.
Vacuum tips for laminating glass with eva filmEva Glass
Vacuuming is important for laminating glass to remove bubbles. Tips for effective vacuuming include placing a wire net over vacuum holes to avoid sealing, putting bars around the silicone bag to help vacuuming at an appropriate height, and using a big glass template under small glasses to help vacuuming and prevent shape changes.
Glass is a non-crystalline amorphous solid made primarily of silica. It is transparent and used widely in architecture. The document discusses types of glass like annealed glass, laminated glass, tempered glass and their uses in automotive and building facades. It also summarizes glass facade testing which ensures proper design, fabrication and installation, saving time and money. Glass facades have advantages like aesthetics, light transmission but also disadvantages like glare, heat absorption and brittleness. An example given is a 2.5 lakh sqft facade installation at NetApp using 6000 glasses at a cost of 42.4 lakhs.
How-to DIY Portrait Laminated Glass
The combination is : Glass+EVA Film+Photo+EVA Film
+Glass.
Remember wait till the photo's ink is dry.
And the EVA Film here is a hot-adhesive film.
Cut the extra EVA Film and the photo outside the glasses
smoothly.
Use high-temperature resistance tape to solid the pre-
laminated glass.
All right reserved by:
China Ethylene-vinyl acetate EVA Interlayer Film
Manufacturer for Safety Architectural Laminated Glass.
China EVA Film for Smart Glass, Privacy Glass, LED Glass
etc.
China Solar EVA Film for Solar Panel Encapsulation.
China Switchable Film for Privacy Glass, Smart Glass.
[cnc@cncnext.com / www.cncnext.com / benext77@gmail.com
/ benext77@hotmail.com) (eva@evafilms.com /
www.evafilms.com ]
The document discusses 10 things to know about laminated glass inserted with ethylene-vinyl acetate (EVA) film. Thicker laminated glass and those with more layers are stronger. Laminated glass made with semi-tempered glass has better impact resistance than those made with fully tempered or float glass. Laminated glass is stronger when using a thicker EVA film. Neutral sealants should be used to seal edges. Proper cleaning and heat control during lamination impact quality and lifespan.
CNC Glass Interlayer produces smart glass film inserts that can be laminated between two glasses using EVA interlayer film. These smart glass inserts offer privacy options when used in laminated glass. CNC Glass Interlayer is a Chinese company that can be contacted at the listed email addresses and websites for more information on their smart glass film products.
This document provides an overview of a glass and frit company. It discusses the company's vision, history since 1978, structure, core businesses in specialty glass formation and processing, powder glasses, flat lamps, and key clients in industries like electronics and solar. It also outlines the company's products and services, experiences in areas like lead-free glass development, and opportunities in growing markets like OLED displays and solar PV.
Green Tape is a high temperature resistant product that can fix pre-laminated glass composed of two pieces of glass with an EVA film interlayer. It also seals the edges of pre-laminated glass to prevent melted EVA film from overflowing outside during the lamination process. The document provides contact information for CNC Glass Interlayer, a China-based company that manufactures and sells Green Tape and other EVA film products.
Introduction of EVA Interlayer Vacuum Bag Laminating Glass MachineEva Glass
The EVA Vacuum Glass Laminating Machine uses a silicone vacuum bag to laminate glass with Ethylene-vinyl acetate (EVA) interlayer film under vacuum conditions, which prevents bubbles in the final laminated glass. It can laminate EVA interlayer film with various materials like art, decorated glass, privacy glass, and solar panels. Compared to autoclave production of Polyvinyl Butyral (PVB) interlayer film, the EVA Vacuum Glass Laminating Machine is easier to operate, less costly to build, and more flexible.
This document discusses time and temperature settings for laminating EVA interlayer film at low temperatures of 80 degrees Celsius or below. It provides the results of tests conducted with an EVAFORCE LOW TEMP 80-120 interlayer film laminated at different temperature stages and durations. The best results were obtained with a first stage of 65 degrees for 10 minutes ramp up and 20 minutes soak time, and a second stage of 82 degrees for 10 minutes ramp up and 190 minutes, which produced a good lamination with no unmelted spots. Proper time and temperature settings are important for successful low-temperature lamination.
The document discusses using a thermal cutter hot knife to trim the edges of laminated glass where the interlayer material has overflowed, and using green masking tape to fix the edges and seal the laminated glass combination.
The document discusses CNC Glass Interlayer, a company that produces EVA glass lamination interlayer film for safety glazing. It provides contact information and lists the company's product offerings, which include EVAFORCE SUPER+ interlayer film and EVAVISION WHITE film. It also describes the company's EVA film packaging, loading containers, and purified EVA producing line.
The document discusses products for laminating glass, including silicone vacuum bags, teflon mesh, green tape, and EVA (ethylene vinyl acetate copolymer) interlayer films. It provides contact information for the company UCOLIN and lists archives of news posts about their laminating products and processes from September 2015 to April 2011.
The document discusses EVA interlayer film, which is used in laminated safety glass. It provides information on EVAFORCE interlayer film, which has excellent durability against heat, moisture and UV. It also mentions green tape products for use in glass lamination systems, including high temperature masking tape made of PET polyester. The document contains numerous advertisements and contact information for the company cncglass.com which supplies EVA interlayer film and related products.
This document discusses updates to messaging rules for group members on LinkedIn to prevent abuse. It provides a brief overview of improvements to LinkedIn Groups and includes a link to visit the Help Center for more details. The document also contains exchanges between members of a professional group discussing EVA interlayer film for laminated glass, heating and trimming of safety glass, and issues with smart film laminated to glass.
The document discusses using CNC GREEN TAPE to seal the edges of pre-laminated glass during the heating process to prevent overflow of the EVA film. It is recommended to add holes to the GREEN TAPE to allow vacuuming if bubbles form during lamination, but holes are not needed if bubbles do not form. The GREEN TAPE does not leave any residue on the glass after being peeled off.
The document describes how CNC Glass Interlayer packs and ships EVA interlayer film for safety laminated glass. It shows photos of the multi-step packaging process, including vacuum sealing the film, boxing it, and loading containers for shipping. The packaging is meant to protect the film during shipping and storage for customers who purchase large quantities.
Silicone bag for laminated glass machine laminating eva interlayer filmEva Glass
The document discusses silicone bags used for laminating glass with EVA interlayer film. EVA film is made of ethylene vinyl acetate copolymer resin and is used as the interlayer between two pieces of glass to bond them together safely. The EVA vacuum glass laminating machine uses a silicone vacuum bag to laminate glass with EVA interlayer film under heat and vacuum to prevent bubbles. The silicone bags have properties making them suitable for this purpose, such as heat resistance and resistance to EVA.
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt
EVA FILM overflowing through laminated glass edges in the oven when heating.
The document is a website for UCOLIN that sells various products for glass laminating and safety glazing, including silicone vacuum bags, teflon mesh, green tape, and EVA interlayer films. It provides contact information and links to pages on their products, archives of news posts, and a navigation menu to the homepage. The website offers materials for vacuum bag laminating of glass and laminated safety glass production.
The document describes the packaging process for EVA safety interlayer film for laminated glass. The EVA film is first vacuumed bagged, then wrapped in aluminum foil and packed in a carton box, which is then placed in a plywood case and secured with iron ropes. The plywood case provides critical protection for the EVA film during sea shipping.
Processing notes of dry melt adhesive eva interlayer filmEva Glass
The document provides processing notes for using dry melt adhesive EVA interlayer film to produce safety laminated glass. It outlines 8 key points regarding proper handling and processing of the film to ensure quality laminated glass is produced, including testing sample films first, avoiding moisture during production, checking for contaminants on the film surface, using appropriate materials and techniques for different glass types, controlling cooling rates, waiting 24 hours before polishing edges, and polishing glass edges before lamination when using materials that may absorb moisture. Attention to all processing factors is important for successful laminated glass production without defects or waste.
Vacuum tips for laminating glass with eva filmEva Glass
Vacuuming is important for laminating glass to remove bubbles. Tips for effective vacuuming include placing a wire net over vacuum holes to avoid sealing, putting bars around the silicone bag to help vacuuming at an appropriate height, and using a big glass template under small glasses to help vacuuming and prevent shape changes.
Glass is a non-crystalline amorphous solid made primarily of silica. It is transparent and used widely in architecture. The document discusses types of glass like annealed glass, laminated glass, tempered glass and their uses in automotive and building facades. It also summarizes glass facade testing which ensures proper design, fabrication and installation, saving time and money. Glass facades have advantages like aesthetics, light transmission but also disadvantages like glare, heat absorption and brittleness. An example given is a 2.5 lakh sqft facade installation at NetApp using 6000 glasses at a cost of 42.4 lakhs.
How-to DIY Portrait Laminated Glass
The combination is : Glass+EVA Film+Photo+EVA Film
+Glass.
Remember wait till the photo's ink is dry.
And the EVA Film here is a hot-adhesive film.
Cut the extra EVA Film and the photo outside the glasses
smoothly.
Use high-temperature resistance tape to solid the pre-
laminated glass.
All right reserved by:
China Ethylene-vinyl acetate EVA Interlayer Film
Manufacturer for Safety Architectural Laminated Glass.
China EVA Film for Smart Glass, Privacy Glass, LED Glass
etc.
China Solar EVA Film for Solar Panel Encapsulation.
China Switchable Film for Privacy Glass, Smart Glass.
[cnc@cncnext.com / www.cncnext.com / benext77@gmail.com
/ benext77@hotmail.com) (eva@evafilms.com /
www.evafilms.com ]
The document discusses 10 things to know about laminated glass inserted with ethylene-vinyl acetate (EVA) film. Thicker laminated glass and those with more layers are stronger. Laminated glass made with semi-tempered glass has better impact resistance than those made with fully tempered or float glass. Laminated glass is stronger when using a thicker EVA film. Neutral sealants should be used to seal edges. Proper cleaning and heat control during lamination impact quality and lifespan.
CNC Glass Interlayer produces smart glass film inserts that can be laminated between two glasses using EVA interlayer film. These smart glass inserts offer privacy options when used in laminated glass. CNC Glass Interlayer is a Chinese company that can be contacted at the listed email addresses and websites for more information on their smart glass film products.
This document provides an overview of a glass and frit company. It discusses the company's vision, history since 1978, structure, core businesses in specialty glass formation and processing, powder glasses, flat lamps, and key clients in industries like electronics and solar. It also outlines the company's products and services, experiences in areas like lead-free glass development, and opportunities in growing markets like OLED displays and solar PV.
Green Tape is a high temperature resistant product that can fix pre-laminated glass composed of two pieces of glass with an EVA film interlayer. It also seals the edges of pre-laminated glass to prevent melted EVA film from overflowing outside during the lamination process. The document provides contact information for CNC Glass Interlayer, a China-based company that manufactures and sells Green Tape and other EVA film products.
Introduction of EVA Interlayer Vacuum Bag Laminating Glass MachineEva Glass
The EVA Vacuum Glass Laminating Machine uses a silicone vacuum bag to laminate glass with Ethylene-vinyl acetate (EVA) interlayer film under vacuum conditions, which prevents bubbles in the final laminated glass. It can laminate EVA interlayer film with various materials like art, decorated glass, privacy glass, and solar panels. Compared to autoclave production of Polyvinyl Butyral (PVB) interlayer film, the EVA Vacuum Glass Laminating Machine is easier to operate, less costly to build, and more flexible.
This document discusses time and temperature settings for laminating EVA interlayer film at low temperatures of 80 degrees Celsius or below. It provides the results of tests conducted with an EVAFORCE LOW TEMP 80-120 interlayer film laminated at different temperature stages and durations. The best results were obtained with a first stage of 65 degrees for 10 minutes ramp up and 20 minutes soak time, and a second stage of 82 degrees for 10 minutes ramp up and 190 minutes, which produced a good lamination with no unmelted spots. Proper time and temperature settings are important for successful low-temperature lamination.
The document discusses using a thermal cutter hot knife to trim the edges of laminated glass where the interlayer material has overflowed, and using green masking tape to fix the edges and seal the laminated glass combination.
This document discusses methods for trimming and sealing laminated glass edges, including using a hot knife trimmer to clean interlayer remains, applying green masking tape to seal edges before oven vacuuming, and offering free samples of EVA interlayer film for testing laminated glass. Contact information is provided for Peter Lin at cnc@cncGlass.com to order supplies.
The document discusses green masking tape that can be used for glass laminating. It also mentions tips for using a hot trimmer to cut edges of laminated glass and provides contact information for Peter Lin at cnc@cncGlass.com or by Whatsapp at 0086 15013829504 if interested in ordering green tape or other glass laminating products available on their websites.
The document provides guidelines for the time and temperature settings for laminating EVA glass interlayer films of various thicknesses. It lists the recommended low and high temperature stages and durations for EVA films ranging from 3mm to 11mm thick. Notes specify that a vacuum should be applied before heating and that times should be increased by 10 minutes for tempered glass.
The document discusses CNC Glass Interlayer's high temperature PET silicone green tape for safety glass laminating. The green tape is used to fix pre-laminated glass and prevent melted EVA film from overflowing glass edges in the oven. It can withstand continuous heating over 180°C and leaves no residue on glass after peeling. The company also offers super clear and milky white EVA films for safety laminated glass.
This document classifies and describes silicone blankets based on three applications: (1) safety glass laminating vacuuming ovens, which come in 2mm or 3mm thicknesses and are transparent or blue; (2) solar cell panel laminators, which come in 3mm, 4mm, or 5mm thicknesses; and (3) wooden door and window hot press machines, which come in 1mm, 1.5mm, or 2mm thicknesses.
This document provides information about smart film products from CNC Glass Interlayer(China), including:
- The smart film can be directly adhered to existing window surfaces with no need for lamination.
- Standard fixed widths of 120cm can be cut to required sizes, with pricing based on the standard size needed to cut the required dimensions. Examples of size calculations are provided.
- Optional electrical transformers ranging from 30W-300W are available, with pricing provided upon request.
- Notes include that pricing is EXW and does not include shipping, and that it is recommended to have the electronic connector assembled by CNC for inexperienced users. Shipping is suggested by air or express to protect the
CNC Glass Interlayer provides non-adhesive smart films for glass lamination using EVA film. The films come in standard fixed widths of 120cm, 150cm, or 180cm and any length. The quantity purchased is based on the standard size needed to cut the required custom size, including any waste. Examples show how a size of 110cmx80cm would use 120cmx80cm, and 50cmx50cm would require two cuts from 120cmx50cm. Optional electrical transformers for powering the films are also available.
Smart film can be ordered in standard fixed widths of 120cm, 150cm, or 180cm by length. The quantity ordered is based on the standard size needed to cut the client's required size, including waste. An electrical transformer is optional and clients can provide their own or have one assembled. Shipping by air or express carrier is recommended to protect the smart film, and dimensional weight will be used to calculate shipping costs.
The document discusses packing and loading EVA interlayer film for shipping without a plywood case. A client wants faster FCL shipping instead of slower LCL shipping and believes the EVA film can be piled in two layers without a case since the quantity is small. The document provides contact information for CNC Glass Interlayer in China.
This document provides information about silicone membrane sheets for hot vacuum pressing from Ucolin Glass Solutions in China. The membrane sheets are available in three thickness options of 1mm, 1.5mm, or 2mm and can be used for hot vacuum pressing applications. Contact information is provided for Ucolin Glass Solutions in China.
EVA film should be stored in a ventilated, dry, clean area away from heat, sunlight, water, and combustible materials. It should not be stacked more than 3 layers if rolled or 5 layers if in plywood cases. EVA film absorbs heat or moisture easily which can cause it to adhere or yellow and lose adhesive strength over time. It should be stored following a first-in, first-out process and used within 12 months.
The document defines crystal particles that may form in EVA interlayer film for safety laminated glass. If the EVA resin is not completely melted during production or if additives react incorrectly, crystal-like particles of various colors can form inside the film. Properly produced EVA interlayer film should not contain these types of crystal particles.
The document compares the light transmittance of CNC Glass Interlayer's EVAFORCE EXTREME film to a super clear EVA film from an international supplier. Spectrophotometer tests found that the EVAFORCE EXTREME blocked more UV radiation but had similar or better visible light transmittance. The conclusion is that the EVAFORCE EXTREME film is the best choice for protecting humans and furniture from UV rays while maintaining high transparency.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.tiwarimanvi3129
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Recycling and Disposal on SWM Raymond Einyu pptxRayLetai1
Increasing urbanization, rural–urban migration, rising standards of living, and rapid development associated with population growth have resulted in increased solid waste generation by industrial, domestic and other activities in Nairobi City. It has been noted in other contexts too that increasing population, changing consumption patterns, economic development, changing income, urbanization and industrialization all contribute to the increased generation of waste.
With the increasing urban population in Kenya, which is estimated to be growing at a rate higher than that of the country’s general population, waste generation and management is already a major challenge. The industrialization and urbanization process in the country, dominated by one major city – Nairobi, which has around four times the population of the next largest urban centre (Mombasa) – has witnessed an exponential increase in the generation of solid waste. It is projected that by 2030, about 50 per cent of the Kenyan population will be urban.
Aim:
A healthy, safe, secure and sustainable solid waste management system fit for a world – class city.
Improve and protect the public health of Nairobi residents and visitors.
Ecological health, diversity and productivity and maximize resource recovery through the participatory approach.
Goals:
Build awareness and capacity for source separation as essential components of sustainable waste management.
Build new environmentally sound infrastructure and systems for safe disposal of residual waste and replacing current dumpsites which should be commissioned.
Current solid waste management situation:
The status.
Solid waste generation rate is at 2240 tones / day
collection efficiently is at about 50%.
Actors i.e. city authorities, CBO’s , private firms and self-disposal
Current SWM Situation in Nairobi City:
Solid waste generation – collection – dumping
Good Practices:
• Separation – recycling – marketing.
• Open dumpsite dandora dump site through public education on source separation of waste, of which the situation can be reversed.
• Nairobi is one of the C40 cities in this respect , various actors in the solid waste management space have adopted a variety of technologies to reduce short lived climate pollutants including source separation , recycling , marketing of the recycled products.
• Through the network, it should expect to benefit from expertise of the different actors in the network in terms of applicable technologies and practices in reducing the short-lived climate pollutants.
Good practices:
Despite the dismal collection of solid waste in Nairobi city, there are practices and activities of informal actors (CBOs, CBO-SACCOs and yard shop operators) and other formal industrial actors on solid waste collection, recycling and waste reduction.
Practices and activities of these actor groups are viewed as innovations with the potential to change the way solid waste is handled.
CHALLENGES:
• Resource Allocation.
Climate Change All over the World .pptxsairaanwer024
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
1. RECENT POSTS
GREEN TAPE FOR EVA FILM
September 7, 2015
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
August 16, 2015
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
August 16, 2015
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
August 16, 2015
Smart film for glass laminating
with eva film
August 15, 2015
Smart film for glass laminating
with eva film
August 15, 2015
Smart film for glass laminating
with eva film
August 15, 2015
EVA INTERLAYER FILM FOR
SAFETY GLAZING
August 14, 2015
Glass
Materials
GREEN TAPE FOR EVA FILM
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
2. Hot knife trimmer blades
August 13, 2015
Hot knife trimmer blades
August 13, 2015
GREEN THERMAL TAPE FOR EVA
PVB SGP
August 12, 2015
Tips of EVA THERMAL CUTTER
August 12, 2015
EVA FILM FREE SAMPLE
August 11, 2015
Tips of thermal cutter for safety
laminated glass 20150809 (12)
August 9, 2015
Thermal cutter eva glass
interlayer film trimmer (18)
June 25, 2015
Color eva glass interlayer film
(foil).jpg
April 16, 2015
Blades for Thermal cutter
trimming laminated glass edges
overflowed remains (SGP
FILM).jpg
April 16, 2015
Blades for Thermal cutter
trimming laminated glass edges
overflowed remains (SGP).jpg
April 16, 2015
Eva glass interlayer film,
transparent color, Royal
blue.jpg
April 10, 2015
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
3. Grey color eva glass interlayer
film, transparent
April 10, 2015
Royal blue transparent eva glass
interlayer film, for color
laminated glass.jpg
April 10, 2015
Thermal cutter trimming EVA
PVB SGP overflowed remains
March 30, 2015
Blades of hot knife trimmer for
eva interlayer film glass
laminating
March 30, 2015
To prevent fire / explosion
hazard of the safety laminated
glass machine with EVA film
March 9, 2015
Thermal Cutter Trimmer for
cleaning interlayer remains of
laminated glass edges with a EVA
PVB SGP TPU interlayer film
March 8, 2015
Cautions of EVA film safety
gazing vacuuming machine
March 8, 2015
EVA PAD FOR SGP PVB EVA TPU
SAFETY GLASS SEPARATION
March 3, 2015
Silver Inserts for EVALAM
interlayer film laminated glass
November 13, 2014
Silicone Adhesive PET Green
Tape for Masking for Powder-
Coat Painting
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
4. December 9, 2013
PET Green Tape for Electrical
Appliance Touch-Screen Display
December 9, 2013
silicone vacuum bag for
laminating machine
August 23, 2013
Diamond Wheels for Straight
Line Glass Edging Machine
July 18, 2013
Grinding Wheels for Beveling
Glass Edging Machine
July 18, 2013
Which Type of EVA Ethylene
Vinyl Acetate Resin For Glass
Laminating EVA Film
June 13, 2013
CHINA GLASS EXPO
May 13, 2013
CHINA GLASS EXPO
May 13, 2013
CHINA GLASS EXPO
May 13, 2013
Silicone Vacuuming Bag for EVA
Glass Laminating
Machine/Privacy Glass
Laminating
March 21, 2013
CNC REAR PROJECTION FILM
January 10, 2013
CNC REAR PROJECTION FILM
January 10, 2013
SMART GLASS (LAMINATED
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
5. GLASS, PDLC GLASS, PRIVACY
GLASS)
December 17, 2012
because Smart Glass Film is high
cost, they can not burden the
cost of failure of laminating
processing.
November 17, 2012
Normally, the heating will be set
in two stage: Low temperature
stage: 60 degrees C for 15
minutes High temperature
stage:130 degrees C for 40
minutes
November 8, 2012
This kind of film can absorb 99%
UV ray radiation, can be applied
in outdoor long-time with no de-
lamination and cracks. It will
not change the color for at least
15 years.
November 8, 2012
CHECK EVA INTERLAYER FILM
WHEN RECEIVE FROM
TRANSPORTATION
November 8, 2012
+ When making the framework,
make sure the glasses is in same
level, and perpendicular in the
floor. + When install more smart
glasses, please solid one glass at a
time. + When install more smart
glasses, 3-5mm space should be
spared between two smart gla
November 8, 2012
-If The Purity of Liquid Crystal is
bad, the life of Privacy Glass
September 7, 2015 CHINA GLASS MATERIALS TECH
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
6. Film(PDLC Film, SPD Film, Magic
Glass Film) will be shorter.
Because the impurities will
accelerate the decompose of the
Privacy Glass Film(PDLC Film,
SPD Film, Magic Glass Film)
materials
November 8, 2012
High bubbles possibility-With
Smart Glass Film sandwiched
inside two glasses, the Pre-
Laminated Smart Glass is easier
to get bubbles than just
laminating two glasses only.
November 8, 2012
PVB stands for Polyvinyl
butyral. It is made of polyvinyl
alcohol by reaction with
butyraldehyde.
November 7, 2012
The glass surface is not clean,
maybe you use some organic
water to wash the glass, make
sure the glass surface is clean
and dry.
November 7, 2012
Prepare the glasses, Better use
edging machine to edge the
glasses.
November 7, 2012
Silicon bag The place of the
vacuuming hole of the silicon
bag and how is the silicon bag be
sealed when laminating.
November 7, 2012
Cross-links are bonds that link
one polymer chain to another.
August 16, 2015 CHINA GLASS MATERIALS TECH
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
7. They can be covalent bonds or
ionic bonds. When the term
“cross-linking”
November 7, 2012
When the Switchable
Transparent Laminated
Glass(Glass+EVA
Film+Switchable Film+EVA
Film+Glass)
November 6, 2012
Use a black car as a background.
November 5, 2012
2-VIEW ANGLE is very wide, the
view angle can be almost
parallel with smart glass film
surface.
October 30, 2012
+Many names. Magic Glass and
Magic Film, switchable
glass/film, miracle glass/film,
smart window, smart glass,PDLF
FILM, glass, PDLC glass, and
privacy window (glass), etc.
October 26, 2012
7)-film-forming properties is
good, and no powder
delamination, coating film is
strong and tough. 8)-the
conductive glue is not easy to
precipitate
October 26, 2012
the cross link reaction and
coupling reaction to be fulfilled
completely.
October 26, 2012
SMART GLASS PDLC FILM for-
August 16, 2015 CHINA GLASS MATERIALS TECH
SAFETY GLAZING PURPOSE
THERMAL GREEN TAPE
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
8. touch screens SMART GLASS
PDLC FILM for-Conference
rooms(business rooms, meeting
rooms)
October 25, 2012
APPLICATION OF SMART GLASS
FILM(SPD FILM, PDLC FILM)
October 25, 2012
2.The manufacturer of the EVA
Film Because different EVA Film
manufacturer has different
formula of producing EVA Film.
So the adhesion of the EVA Film
will be different.
October 25, 2012
【7】Point structure of glass
should be strengthened.
【8】For safety reason, it’s better
to use laminated semi-tempered
glass for Sky-light glass(not as
floor).
October 20, 2012
7 Tips of Manufacturing Safety
Glass with EVA Hot-melt Dry
Adhesive Film
October 19, 2012
HOW TO SOLVE ADHESIVE
STRENGTH OF EVA FILM FOR
LAMINATED GLASS
October 19, 2012
Tempering Furnace Glass
Drilling Machine Glass Washing
Machine
September 13, 2012
Коли деякі клієнти обробки
багатошарове скло з плівкою
August 16, 2015 CHINA GLASS MATERIALS TECH
Smart film for glass
laminating with eva film
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
9. EVA прошарок,
September 12, 2012
Painted Glass Machine Engraved
glass Carved Art Glass three
dimensional effect glass
September 12, 2012
Vertical Glass Washing and
Drying Machine Glass Cutting
Table Vertical Insulating Glass
Production Line
September 11, 2012
Model QJ877C-3 Horizontal
Beveling Glass Grinding
Machine YZZT-X1200 Glass
Washing Machine
September 11, 2012
Aluminum win-door Machinery
PVC win-door Machinery
Hollow glass processing
equipment
September 10, 2012
Glass Straight Line Double
Edging Machine Glass Straight
Line Beveling Edger Glass
straight line edging machine
round
September 9, 2012
Bilateral straight line Dual
rounded edges Bilateral
production line Straight edge
September 8, 2012
Straight Line Double Edging
Series Straight Line Pencil
Double Edging Production Line
Series
September 8, 2012
August 15, 2015 CHINA GLASS MATERIALS TECH
Smart film for glass
laminating with eva film
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
10. laminaat met een decoratieve
laag aan verschillende gelaagd
glas ontwerpen te maken
September 8, 2012
Glass for home appliances Solar
Energy glass Low-E glass
Vacuum Insulated Panel
September 8, 2012
Advanced Basic North Glass’s
September 7, 2012
lass Washing & Drying
Machines Laminated Glass
Production Line Glass Washing
& Drying Machines for Solar
Glass
September 7, 2012
Magic Film intelligente, anche
nominato come FILM PDLC
(polimero disperso dispositivi a
September 7, 2012
Products Catalog Double Edger
Series Drilling Machine Series
Glass Washing/Drying Machine
September 7, 2012
SMART стеклянной пленки
(Privacy Glass) состоит из двух
прозрачной проводящей
пленки ламинирования с
September 6, 2012
Laminated Glass Processing Line
Glass Washing and Drying
Machines Edge Grinding
Machine
September 6, 2012
Low-E Glass Coated Glass Hollow
Glass Laminated Glass
August 15, 2015 CHINA GLASS MATERIALS TECH
Smart film for glass
laminating with eva film
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
11. September 6, 2012
Full-automatic intelligent glass
bending furnace Convection
glass autoclave
September 5, 2012
AUTOCLAVE LAMINATING LINE
Washing Assembling
September 5, 2012
Glass Laminating Line Mosaic
Glass Producing Line Tempering
Furnace Tempered Glass Heat
Soak Furnace
September 5, 2012
Energy-efficient forced
Horizontal roller flat glass JGF-
DF-D Double
September 5, 2012
Flat glass tempering f.. LL-W
series flat/bent .. LL-PL Series
Continuou..
September 4, 2012
Advanced Basic North Glass’s
LOW-E Coating Produ… Large
area TCO Hori…
September 3, 2012
Girafe Series Girafe Certificated
Series DS Corning Series
September 3, 2012
Shower Knobs Shower Hinge
and Shower Supporter Glass
Brackets and Shower Stabilizer
September 3, 2012
Pattern Glass Low-iron Solar
Pattern Glass
September 2, 2012
August 15, 2015 CHINA GLASS MATERIALS TECH
EVA INTERLAYER FILM FOR
SAFETY GLAZING
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
12. Glass Laminating Line Mosaic
Glass Producing Line Tempered
Glass Heat Soak Furnace
September 2, 2012
Hard Material Coating Machine
Series Soft Material Printing
Machine Series
September 2, 2012
petëzuar. Për më tepër, duke
përdorur filmi EVA në gotë
laminating nuk
September 1, 2012
Detection of glass glue A building
in Shenzhen6 Composite fire-
resistant glass
September 1, 2012
Performance parameters
September 1, 2012
Laminated Glass Production
Line
SP25Loading(Unloading)mac
hine Glass Washing And Drying
Machine
August 31, 2012
-Arctic Snow EVA INTERLAYER
FILM 69.8% Visible Light
Transmittance
August 31, 2012
Diwei Film、Meidi Color Film
Automatic sliding door glass
thermal laminator Glass
Painting Equipment Series
August 31, 2012
OPTICS MEASUREMENT THIN
FILM OPTICS ROLL COATING
GLASS MEASUREMENT
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
13. August 30, 2012
Development course Honors
Solutions Service
August 29, 2012
Glass straight-line beveling
machine Up/down Glass
straight-line beveling glass
straight line bevelling machines
August 28, 2012
Bilateral series Hypotenuse
Series Straight Edge Series
August 27, 2012
Bevelling machine Single-Arm
shape machine Straight-line
edging machine
August 27, 2012
Glass straight edging machine
bilateral Glass Beveling Machine
Glass straight edging
August 27, 2012
DXY-20 Variant machine DXS-
4020glass double edging
machine DXS-3022 Glass linear
bilateral grinding
August 26, 2012
Edging Standard Tempered glass
Laminated glass Insulating glass
August 26, 2012
Laminator Glue Machine
auxiliary equipment
August 26, 2012
WHTB SDF WHTB DF WHTB CS
August 26, 2012
SGG Insulation glass Precise
August 14, 2015 CHINA GLASS MATERIALS TECH
Hot knife trimmer blades
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
14. processed glass Tempered &Heat
strengthened glasses
August 25, 2012
Tempring Laminating Mirror
Silvering
August 25, 2012
Resin Bond Series Sinter Metal
Bond Series Electroplated Bond
Series
August 25, 2012
Hot Sales Roll to Roll Printer
Textile Printer Double Side
Printer UV Flatbed Printer
August 25, 2012
Glass Scratch Repair Set Glass
Scratch Repair Glass Crack
Repair Set Simplified Glass
Crack
August 24, 2012
Architecture Scanners
Mechanical frames System
Sensors
August 24, 2012
Product Material Quality
Technology
August 21, 2012
Silicone sealant Polysulphide
sealant Polyurethane sealant
New Products
August 21, 2012
OPTICS MEASUREMENT ROLL
COATING GLASS
MEASUREMENT GLASS
DETECTING
August 20, 2012
August 13, 2015 CHINA GLASS MATERIALS TECH
Hot knife trimmer blades
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
15. Proudly powered by WordPress
Constant temperature and…
Thermal shock test chamber
Aging test machine Paper
packing testing device
August 20, 2012
Glass Straight-line
EdgingMachine Glass Pencil
Edging Machine Glass Shape
Edging Machine
August 17, 2012
Cast Film Line BOPP Film Line
August 16, 2012
Tempered glass Laminated Glass
Perspective Glass Ultra-white
Glass
August 16, 2012
Double Edging Machine Straight
Beveling Machine Straight
Edging Machine Shaped Edger &
Beveller
August 15, 2012
PVC Window Machine Cutting
Machine Aluminum Window
Machine Aluminum Spacer I.G
Line
August 14, 2012
Glass cutter Glass handling tools
Small machine Acessories for
glass machine
August 13, 2012
Silicone series Curtain wall
series Window & door series
Electrical industry
August 9, 2012
Laminated glass equipment
August 13, 2015 CHINA GLASS MATERIALS TECH
1 2 … 52
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
16. Glass edging machine Glass
washing machine Glass Drilling
Machine Glass bending furnace
August 8, 2012
Doubel Edging Machine Round
Edging Machine
August 8, 2012
Mechanical Loading up&nbs
Full-automatic Lay-up&nbs PVB
Film Paver
August 6, 2012
Glass Double edger series
Product Glass Variable Miter
Series Glass Washer&Drier
Series
August 3, 2012
Bilateral edge grinding Linear
beveling Linear edge grinding
August 2, 2012
Beveling Edging Machine Round
Edging Machine Inside and
outside the circle Internal and
external circular
August 2, 2012
Double Edging Machine Glass
straight line beveling machine
Shaped glass edging & beveling
machine
August 2, 2012
GLASS STRAIGHT LINE
BEVELLING MACHINE GLASS
STRAIGHT LINE EDGING
MACHINE GLASS CUTTING
MACHINE
August 1, 2012
Aluminum Frames Drying Racks
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
17. Consumable Items
August 1, 2012
Xialhe district,DaoJiao
town,DongGuan city
July 31, 2012
Furniture Glass Arc
TemperedGlass Sauna Glass
July 31, 2012
CE series Double Edging Series
Standard Edging Double Edging
Product line
July 31, 2012
Deep processing machinery
Straight hypotenuse machine
grinding wheel Bilateral
machine grinding wheel
July 30, 2012
Glass Straight Line Fo…Glass
Tempering Furnac…Automatic
Production L…
July 30, 2012
Flat Glass Tempering Furnace
Flat Glass Double Chamber
Tempering Furnace Reversible
Flat-Bending Glass Tempering
Furnace
July 30, 2012
Glass Straight-line
EdgingMachine Glass Pencil
Edging Machine Glass Shape
Edging Machine
July 28, 2012
Machinery Accessories Series
Aluminum Product Series
Electric Accessories Series Glass
Cutting Series
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM
18. July 27, 2012
ORDINARY FLAT GLASS
TEMPERING FURNACES (PG)
FLAT GLASS TEMPERING
FURNACES WITH CONVECTION
HEATING SYSTEM(TPG-A)
July 27, 2012
Bilateral series Straight Edge
Series Cleaning Series Series of
noisy jet
July 26, 2012
Haidebao
July 26, 2012
YS Series three-phase aluminum
housing asynchronous motor
Special Grinding Motor for Glass
Machine
July 26, 2012
appliance Chinese hood glass
July 25, 2012
Glass Special-shape Glass
straight line Glass Washing &
Dryi
July 25, 2012
cnc@cncglass.com cnc@cncnext.com benext77@hotmail.com SAFETY GLASS LAMINATION INTERLAYER FILM EVA
www.cncglass.com www.cncnext.com www.evafilms.com SAFETY GLASS LAMINATION INTERLAYER EVA FILM