High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt
EVA FILM overflowing through laminated glass edges in the oven when heating.
How cnc green tapes preventing melt eva film over flowing out of laminated glass edges in the oven
1. HOW CNC GREEN TAPES PREVENTING MELT EVA FILM OVER FLOWING OUT OF LAMINATED GLASS
EDGES IN THE OVEN
BY PETER LIN
Do you have a video or photograph on how to use this CNC GREEN TAPE in EVA FILM glass laminating? What is
the function of the CNC GREEN TAPE for EVA FILM glass laminating?
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt
EVA FILM overflowing through laminated glass edges in the oven when heating.
www.cncglass.com
cnc@cncglass.com
GD, CHINA
4. If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the
glass laminating oven, do we need to make some holes on the CNC GREEN TAPE for vacuuming?
It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully
without bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result of
the edges of the final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the
corners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to help
pre-laminated glass vacuuming.
www.cncglass.com
cnc@cncglass.com
GD, CHINA
6. What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off.
CNC GREEN TPAE can stand
continuously heating more than 180℃with strong tear resistance.
www.cncglass.com
cnc@cncglass.com
GD, CHINA
7. May i have the CNC GREEN TAPE technical datasheet?
TECHNICAL DATASHEET OF CNC GREEN TAPE:
TESTED Item
GREEN THERMAL TAPE
Color
Green
Sealant Materials
Silicone
Sealant Materials Thickness
0.035±0.005mm
Thickness of Tape Sheet
0.06±0.005mm
Temperature Resistance
180℃ Continuously heating
200 ℃ Discontinuously heating
Tear Strength
120 N/25mm
Adhesive Strength
7.5 N/25mm
Elongation
55%
Volage Resistance
5 KV
Insulation Resistance
1,000,000 MΩ
Insulation Grade
F
www.cncglass.com
cnc@cncglass.com
GD, CHINA