Exposure Risk Assessment Challenges : Occupational Hygiene in the Pharmaceutical and Chemical Industries, AIHA 2013, Asia Pacific OH Conference, Singapore
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
Exposure Risk Assessment Challenges : Occupational Hygiene in the Pharmaceutical and Chemical Industries, AIHA 2013, Asia Pacific OH Conference, Singapore
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
It is a common perception that accidents are unexpected or unplanned events, but in many instances, that’s not necessarily so. Some accidents result from unsafe conditions and work practices that have been ignored or tolerated for weeks, months, or even years.
Please join our webinar presentation to discover and review the truth about “Accidents”. Learn about the “Accident Pyramid” and most importantly, the “Preventive Measures” to avoid workplace injuries that we often refer to as “Accidents”.
Topics include:
Slips, Trips & Falls
Back Injuries & Prevention
Chemical Safety
Office Ergonomics and much more.
Presented by AlphaStaff Risk Control Consultant, Ben Abdallah.
Learn crane and rigging management systems from one of the top General Contractors in the U.S. known for its comprehensive training and focus on employee safety. This three-part session will provide insight into Kiewit’s essential management principles that you can implement in your company.
The topics include:
new operators: hiring, training and technology
risk assessment and mitigation for cranes on job sites
rigging personnel and qualifications
lift planning and incident reporting
Speaker: Bret Shields, Corporate Crane Compliance Manager, Kiewit Crane Services
10 Misconceptions about workplace health & safetyMichelle Oakey
Whether you clock in at an office, grocery store or construction site, there’s a good chance you’re surrounded by potential danger zones. Some may be pretty obvious, while others slip under the radar.
The following presentation discussess the changes to the OSHA HAZCOM standard to comply with the GHS rules. As of 1 Dec 13, all business should have completed the training to inform the workforce of the changes to product labels and containers as well as information provided on Safety Data Sheets. If you need help with your GHS policy, program, or procedures, contact us by telephone in the US at 1+ 7322215687 or by email at windsgroup@aol.com.
BOS 4025, OSHA Standards 1
Learning Objectives
Upon completion of this unit, students should be able to:
1. Demonstrate the ability to locate and interpret the OSHA standards in
Subparts G-I.
2. Define key terms common to the standards covered in this module.
3. Apply the OSHA standards in Subparts G-I to real-world situations.
Unit Lesson
The OSHA standards can be loosely divided into two categories: safety
standards and health standards. The difference is that safety standards
typically prevent injury through design specifications, and health standards
prevent illness that may develop from long-term exposure to specific hazards.
In general, compliance with safety standards is easier than health; we can
install guardrails to prevent falling or saw blade guards to prevent cuts. Health
standards are often based on research into long-term effects of exposure to a
hazard (sometimes called a “stressor” in the health world). Determining
compliance may involve measurements or air sampling and some applied
science to develop controls. Many safety professionals have become proficient
in analyzing health hazards, and some organizations enlist the help of a trained
industrial hygienist. Regardless of who does the measurements, the final
responsibility for OSHA compliance will likely fall to the safety professionals.
An industrial hygienist prepares to test a water sample for contaminants (McGinley, 2006)
Reading
Assignment
See below to access the
required reading material
for this unit.
Supplemental
Reading
See information below.
Learning Activities
(Non-Graded)
See information below.
Key Terms
1. Air purifying
respirator
2. Atmosphere-
supplying respirator
3. Audiometric testing
program
4. Baseline audiogram
5. Dry spray booth
6. Filtering facepiece
7. Fit test
8. Flashpoint
9. Hearing protector
attenuation
10. Monitoring
11. Negative pressure
respirator
12. Safety can
13. Self-contained
breathing apparatus
(SCUBA)
14. Standard threshold
shift
15. Supplied-air
respirator
UNIT III STUDY GUIDE
Subparts G–I: Environmental Controls, Hazardous
Materials, and Personal Protective Equipment
BOS 4025, OSHA Standards 2
In Unit I, we focused on a number of safety hazards common to most
workplaces. In this unit, we add some health standards, as well as some
standards that combine both safety and health issues. The title of Subpart G,
Occupational Health and Environmental Control, should be a clear indication of
what we can expect to encounter. Note that “environmental control” has
nothing to do with the Environmental Protection Agency (EPA) or other
environmental organizations. Instead, it refers to the workplace environment
and includes sections on ventilation, occupational noise control, and non-
ionizing radiation.
The first section of the ventilation standard provides specifications and
requirements for exhaust hoods and systems ...
Please see attached our Safety Cornerstones document. This outlines further risks to Businesses and their Directors & Officers, how to protect yourselves and get assistance with Risk Management.
To cater a green environment of manufacturing industries, reponsible persons or designee, higher management, owners should go through it and implement as required as their scope for safety, health, profitable business to global customer response.
OSHA Fact Sheet: OSHA's Crystalline Silica Rule: Construction. OSHA is issuing two standards to protect workers from exposure to respirable crystalline silica - one for construction, and the other for general industry and maritime - in order to allow employers to tailor solutions to the specific conditions in their workplaces.
Similar to Safety And Health Leg & Reg 2011 Asse Pdc Iv (20)