Safety
•Download as PPT, PDF•
0 likes•352 views
This document outlines various safety measures that should be followed in a clinical laboratory. Personal safety measures include proper hygiene, protective equipment like eye protection and gloves. Biological safety involves preventing contact with specimens and proper procedures after accidental contact like washing. Chemical safety requires storing chemicals properly and taking appropriate actions for minor or large chemical splashes. Fire safety involves safe handling of electrical equipment, combustibles and flammable liquids. Radiation safety follows principles of reducing time of exposure, increasing distance from sources, using shielding and monitoring personnel. Laser safety guidelines include restricting access and use of appropriate eye protection. Proper disposal of waste and good housekeeping are also important.
Report
Share
Report
Share
Recommended
Hasl 1992dnlfile 1
This document provides guidance to protect responders from hazards during hurricane relief efforts. It describes 14 main hazards including unstable structures, noise, dust, heat stress, confined spaces, chemicals, electricity, carbon monoxide, injuries, heavy equipment, food/water-borne diseases, animal/insect-borne diseases, and traumatic stress. For each hazard, it lists protective measures like using proper protective equipment, monitoring conditions, and understanding symptoms of overexposure. It also provides tips for managing stress and maintaining health and safety.
Laboratory 1 abe 313
This document provides information about laboratory safety procedures and proper use of personal protective equipment (PPE) in a laboratory setting. It outlines dos and don'ts for safe laboratory practices, including always wearing appropriate eye protection and closed-toe shoes. Basic PPE like safety goggles, respirators, and gloves are described. Common laboratory equipment like scales, moisture meters, calipers and their proper and safe use are explained. Safety precautions for equipment including ovens, infrared thermometers, and multimeters are provided. The document emphasizes ensuring safety in the laboratory and following dos and don'ts.
Laser and UV safety
Laser and UV safety involves protecting users from biological damage. Lasers are classified based on hazard level, with Class IV lasers posing the greatest risk of eye and skin injury. Safety measures include using appropriate eyewear, enclosing beams, interlocks, and restricting access. UV radiation between 290-400nm can cause eye cataracts and skin damage. Engineering controls like enclosures, ventilation and shielding help reduce exposure risk along with administrative controls like training, minimizing exposure time, and signage. Personal protective equipment like gloves and eye protection are also needed.
Personal protective equipment
This document outlines proper personal protective equipment (PPE) for various workplace hazards. It lists specific hazards like noise, chemicals, falling objects, and their recommended PPE like ear plugs, masks, safety glasses, and helmets. It provides instructions for safely removing gloves and washing hands. It emphasizes selecting the right PPE for each hazard, keeping PPE in good condition, avoiding shared use of some items, and always storing PPE properly. The overall message is to protect your hands by always wearing the right PPE for each job.
SAFETY RULE AND REGULATION IN MICROBIOLOGICAL LABOURATORY
Safety rules and regulations are necessary in microbiology laboratories to prevent adverse health effects. Key safety procedures include:
- Following good lab practices like wearing protective equipment, properly labeling samples, and disinfecting work surfaces.
- Using aseptic techniques to prevent contamination of cultures.
- Properly disposing of contaminated waste through autoclaving or using sharps containers.
- Knowing emergency procedures like the locations of eye washes, showers, and how to handle spills.
- Adhering to biosafety levels which are determined by the risk of pathogens being studied.
Personal Protective Equipment (PPE), general laboratory
Content structure:
1. Hazards in general laboratory
2. Chemical hazards classification
3. Sources to look for the hazard information
4. Safety regulation standards by OSHA
5. Standards for handling chemicals by OSHA
6. Standards for PPE by OSHA
7. PPE Recommendations by NIOSH
8. Standard Tests and Certifications
9. 5 Things to consider when choosing a PPE
Safety & environmental usage of equipment
This document discusses factors that can influence the performance of equipment and provides suggestions for proper preventative maintenance. It covers environmental factors like temperature, moisture, dust and power supply issues. Recommendations are given for cleaning, lubrication, ventilation and using surge protectors to prevent equipment failures and extend equipment life.
Appropriate Use of PPE by SQHN
This document provides guidance on the appropriate use of personal protective equipment (PPE) by healthcare workers. It defines what PPE is and discusses various types of PPE like gloves, gowns, masks, goggles, and shoe/head covers. For each type of PPE, it describes available options and provides recommendations on when they should be worn to protect against infectious pathogens. The goal is to educate healthcare workers on selecting and using proper PPE depending on the level of anticipated contact with patients' body fluids.
Recommended
Hasl 1992dnlfile 1
This document provides guidance to protect responders from hazards during hurricane relief efforts. It describes 14 main hazards including unstable structures, noise, dust, heat stress, confined spaces, chemicals, electricity, carbon monoxide, injuries, heavy equipment, food/water-borne diseases, animal/insect-borne diseases, and traumatic stress. For each hazard, it lists protective measures like using proper protective equipment, monitoring conditions, and understanding symptoms of overexposure. It also provides tips for managing stress and maintaining health and safety.
Laboratory 1 abe 313
This document provides information about laboratory safety procedures and proper use of personal protective equipment (PPE) in a laboratory setting. It outlines dos and don'ts for safe laboratory practices, including always wearing appropriate eye protection and closed-toe shoes. Basic PPE like safety goggles, respirators, and gloves are described. Common laboratory equipment like scales, moisture meters, calipers and their proper and safe use are explained. Safety precautions for equipment including ovens, infrared thermometers, and multimeters are provided. The document emphasizes ensuring safety in the laboratory and following dos and don'ts.
Laser and UV safety
Laser and UV safety involves protecting users from biological damage. Lasers are classified based on hazard level, with Class IV lasers posing the greatest risk of eye and skin injury. Safety measures include using appropriate eyewear, enclosing beams, interlocks, and restricting access. UV radiation between 290-400nm can cause eye cataracts and skin damage. Engineering controls like enclosures, ventilation and shielding help reduce exposure risk along with administrative controls like training, minimizing exposure time, and signage. Personal protective equipment like gloves and eye protection are also needed.
Personal protective equipment
This document outlines proper personal protective equipment (PPE) for various workplace hazards. It lists specific hazards like noise, chemicals, falling objects, and their recommended PPE like ear plugs, masks, safety glasses, and helmets. It provides instructions for safely removing gloves and washing hands. It emphasizes selecting the right PPE for each hazard, keeping PPE in good condition, avoiding shared use of some items, and always storing PPE properly. The overall message is to protect your hands by always wearing the right PPE for each job.
SAFETY RULE AND REGULATION IN MICROBIOLOGICAL LABOURATORY
Safety rules and regulations are necessary in microbiology laboratories to prevent adverse health effects. Key safety procedures include:
- Following good lab practices like wearing protective equipment, properly labeling samples, and disinfecting work surfaces.
- Using aseptic techniques to prevent contamination of cultures.
- Properly disposing of contaminated waste through autoclaving or using sharps containers.
- Knowing emergency procedures like the locations of eye washes, showers, and how to handle spills.
- Adhering to biosafety levels which are determined by the risk of pathogens being studied.
Personal Protective Equipment (PPE), general laboratory
Content structure:
1. Hazards in general laboratory
2. Chemical hazards classification
3. Sources to look for the hazard information
4. Safety regulation standards by OSHA
5. Standards for handling chemicals by OSHA
6. Standards for PPE by OSHA
7. PPE Recommendations by NIOSH
8. Standard Tests and Certifications
9. 5 Things to consider when choosing a PPE
Safety & environmental usage of equipment
This document discusses factors that can influence the performance of equipment and provides suggestions for proper preventative maintenance. It covers environmental factors like temperature, moisture, dust and power supply issues. Recommendations are given for cleaning, lubrication, ventilation and using surge protectors to prevent equipment failures and extend equipment life.
Appropriate Use of PPE by SQHN
This document provides guidance on the appropriate use of personal protective equipment (PPE) by healthcare workers. It defines what PPE is and discusses various types of PPE like gloves, gowns, masks, goggles, and shoe/head covers. For each type of PPE, it describes available options and provides recommendations on when they should be worn to protect against infectious pathogens. The goal is to educate healthcare workers on selecting and using proper PPE depending on the level of anticipated contact with patients' body fluids.
Lab Safety in Your Classroom
This document outlines the mission and objectives for a student teacher to demonstrate safe laboratory practices. The student teacher must [1] model safe behavior during experiments, [2] select age-appropriate investigations that minimize safety risks, and [3] identify and articulate safety rules to students. Additionally, the student teacher will consult Flinn Scientific, the National Science Teachers Association, and their cooperating teacher to assist in developing a safety plan.
An Introduction to Chemstore | Hazardous Materials Experts
Chemstore has 20 years experience in the design and manufacture of hazardous material storage systems for all industries.
We are the Number 1 provider of safety storage solutions and associated products in Ireland and the UK.
3.3 work safety
The document discusses safety rules for science laboratories. It states that laboratory experiments can be dangerous, so rules must be followed to ensure everyone's safety. Some general rules include not entering the lab without permission, eating, drinking, running or carrying out experiments without permission. When doing experiments, students should read instructions carefully, not smell gases without instruction, use equipment carefully, wash equipment after use and report any accidents. The document also lists common laboratory apparatus like Bunsen burners, tripod stands, beakers and their functions. It emphasizes the importance of following safety procedures when working with hazardous substances.
Laboratory safety
This document provides information on laboratory safety practices. It discusses designating a safety officer, biosafety levels and practices, general safety rules and regulations, biosafety cabinets, and safe use of biosafety cabinets. Biosafety levels range from level 1 to level 4, with increasing containment practices required for higher levels due to more dangerous biological agents. Biosafety cabinets come in classes I-III and types A1, A2, B1, and B2, with each type providing different levels of protection for samples and/or personnel. Proper use of biosafety cabinets is important to maintain safe airflow.
Is It Safe? A Cautionary Tale and Practical Guide to Laboratory Safety and C...
This document outlines the key requirements of the OSHA Lab Standard regulations. It discusses common causes of laboratory accidents like inadequate training and safety protocols. It summarizes statistics on laboratory accidents and fatalities. It also reviews several high-profile laboratory accident cases and the systemic deficiencies that led to the incidents. The document explains the hierarchy of hazard controls and the "Swiss cheese" model for managing risk. Finally, it details the main sections of the OSHA Lab Standard, including requirements for chemical hygiene plans, personal protective equipment, employee training, medical consultations, and recordkeeping.
1. laboratory safety protocol
This document outlines the laboratory safety protocol for a microbiology laboratory course. It discusses the course assessments, which include quizzes, a midterm exam, and a final exam. It also describes the various biosafety levels based on the infectious agents being studied, with biosafety level 4 requiring the highest level of containment. The basic safety requirements for the microbiology laboratory are provided, including maintaining a clean work area, wearing protective clothing and closed-toe shoes, prohibiting food and drinks, proper pipetting techniques, hand washing, and autoclaving contaminated materials.
Lab safety and PPE and Biosafety levels
This document discusses lab safety and first aid. It defines hazard containment and safety awareness for lab personnel. It outlines employer responsibilities like establishing safety policies and providing training, and employee responsibilities like following safety methods. It covers basic lab safety, physical hazards like fire and electricity, chemical hazards, and biological hazards. It also discusses first aid kits, universal precautions, and first aid for lab accidents.
Laboratory safety
Detailed power point presentation of Laboratory safety specially working in bio hazardous situations.
Biological and chemical safety in the microbiology laboratory
laboratory safety in microbiology lab, how to avoid contamination from the microbes and how to perform practicals safely.
Spill control
This presentation discusses how to properly clean and decontaminate spills of blood and other potentially infectious materials in laboratories. It defines minor and major spills and outlines the appropriate response and cleanup procedures for each. Specific protocols are provided for cleaning spills on floors, benches, in biosafety cabinets, and centrifuges. Key steps include wearing proper PPE, covering spills with absorbent materials, applying an appropriate disinfectant for 20 minutes of contact time, and proper disposal of contaminated waste. The goal is to safely and effectively decontaminate any spilled infectious materials to prevent disease transmission.
Spill Response Training by New York Medical College
The document outlines NYMC's spill response training program which teaches employees to properly respond to chemical and biological spills according to regulatory standards and NYMC procedures. It details the assessment and notification process for spills and use of spill kits located in each lab. Employees are instructed to contact Security who will notify EHS for any spills they cannot safely handle themselves to ensure hazardous spills are properly contained and cleaned.
Laboratory Safety, Biomedical Waste & Its Management
Nowadays "Safety" takes up a major role in all the Laboratories, let it be safety equipment or safety measures. This powerpoint gives you a rough idea of the various hazards that may occur in a laboratory and the steps to be taken to prevent them. Also a small note is given on the Biomedical Waste and its management.
Chemical Hazards !!
Continue exposure to any Hazardous or toxic chemical by anyone will result in adverse effect on one’s health.
Lab safety rules and symbols Summary
The most dangerous thing in any laboratory is someone who doesn't know what they are doing. The document outlines many important lab safety rules regarding personal protective equipment, chemical handling, fire safety, first aid procedures, and cleanup. Key safety symbols are explained, such as wearing goggles and gloves when handling hot materials or chemicals. Proper disposal methods and treating animals and plants with care are also emphasized.
General Laboratory Safety Training by CSU
This document provides an overview of general laboratory safety rules and guidelines for California State University, Long Beach. It covers topics such as personal hygiene, housekeeping, protective equipment, chemical hazards, physical hazards, ventilation, and emergency response. The key points are that students must review the safety materials and complete a quiz to verify their understanding, abide by all safety practices, and ask questions before operating any equipment or using new materials. Protective equipment like gloves and goggles should be worn as appropriate. Chemical and physical hazards must be properly managed according to established procedures.
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...Atlantic Training, LLC.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan to address spill prevention, response, and reporting. It classifies spills as minor, intermediate, or major and describes the appropriate response actions for each. The document provides guidance on securing the site, removing the spill source, controlling and absorbing the spill, containerizing materials, reporting requirements, and protecting responders during a spill event. It emphasizes the importance of having a site-specific spill plan and standard operating procedures.Protocol for Chemical Spills Training by University of Northern Iowa
This document outlines protocols for responding to chemical spills. It discusses hazard awareness and preparation, including having necessary emergency equipment, knowledge of emergency procedures, and spill kits. It provides guidance on responding to minor spills, which can be cleaned up with available supplies, and major spills, which require evacuating the area and contacting authorities. The document also discusses spill prevention best practices like avoiding clutter and only having necessary chemicals available.
Health and Safety in the Laboratory by OSHA
The document discusses health and safety best practices for school laboratories, including identifying hazards, implementing engineering and administrative controls like proper ventilation and training, using personal protective equipment, complying with OSHA regulations, and properly handling chemical storage, waste disposal, and emergency situations. Maintaining a safe lab requires assessing hazards, having appropriate safety equipment and training procedures, and properly managing chemical inventory, storage, and disposal.
Spill Prevention and Control Training by USMRA
The document outlines regulatory requirements and best practices for spill prevention, control, and emergency response. It discusses using proper containers and storage, training, and secondary containment to prevent spills. Emergency response plans should establish personnel roles, communication, and procedures for evacuation, decontamination, and medical treatment. The spill response leader is responsible for overall command and coordination with authorities, and must be clearly designated in the written plan. Post-incident evaluation includes determining the cause and lessons learned.
SCS Safety Training (2).pdf
This document provides a summary of workplace safety training on hazards including chemicals, physical hazards, ergonomics, electricity, and required protections. It outlines common chemical hazards like welding fumes and their health effects. It describes physical hazards like noise, vibration, heat and their controls. Proper use of personal protective equipment, engineering and administrative controls are emphasized. Electrical safety topics covered include arc flash, shock, proper use of GFCIs and following lockout/tagout procedures. Employer responsibilities for ensuring safety are also reviewed.
Lab safety 19062019.ppt
This document outlines general laboratory safety guidelines. It discusses why laboratory safety is important to protect workers, visitors, and the work. Laboratory hazards include fire, sharps, spills, pressure equipment, chemicals, and biological and radiation hazards. The key aspects of laboratory safety are to identify hazards, evaluate risks through assessments, and control risks following a hierarchy of controls. Control measures include elimination, substitution, engineering controls, administrative controls, and personal protective equipment. Proper hygiene, waste disposal, chemical storage, emergency procedures, and incident reporting are also covered.
More Related Content
Viewers also liked
Lab Safety in Your Classroom
This document outlines the mission and objectives for a student teacher to demonstrate safe laboratory practices. The student teacher must [1] model safe behavior during experiments, [2] select age-appropriate investigations that minimize safety risks, and [3] identify and articulate safety rules to students. Additionally, the student teacher will consult Flinn Scientific, the National Science Teachers Association, and their cooperating teacher to assist in developing a safety plan.
An Introduction to Chemstore | Hazardous Materials Experts
Chemstore has 20 years experience in the design and manufacture of hazardous material storage systems for all industries.
We are the Number 1 provider of safety storage solutions and associated products in Ireland and the UK.
3.3 work safety
The document discusses safety rules for science laboratories. It states that laboratory experiments can be dangerous, so rules must be followed to ensure everyone's safety. Some general rules include not entering the lab without permission, eating, drinking, running or carrying out experiments without permission. When doing experiments, students should read instructions carefully, not smell gases without instruction, use equipment carefully, wash equipment after use and report any accidents. The document also lists common laboratory apparatus like Bunsen burners, tripod stands, beakers and their functions. It emphasizes the importance of following safety procedures when working with hazardous substances.
Laboratory safety
This document provides information on laboratory safety practices. It discusses designating a safety officer, biosafety levels and practices, general safety rules and regulations, biosafety cabinets, and safe use of biosafety cabinets. Biosafety levels range from level 1 to level 4, with increasing containment practices required for higher levels due to more dangerous biological agents. Biosafety cabinets come in classes I-III and types A1, A2, B1, and B2, with each type providing different levels of protection for samples and/or personnel. Proper use of biosafety cabinets is important to maintain safe airflow.
Is It Safe? A Cautionary Tale and Practical Guide to Laboratory Safety and C...
This document outlines the key requirements of the OSHA Lab Standard regulations. It discusses common causes of laboratory accidents like inadequate training and safety protocols. It summarizes statistics on laboratory accidents and fatalities. It also reviews several high-profile laboratory accident cases and the systemic deficiencies that led to the incidents. The document explains the hierarchy of hazard controls and the "Swiss cheese" model for managing risk. Finally, it details the main sections of the OSHA Lab Standard, including requirements for chemical hygiene plans, personal protective equipment, employee training, medical consultations, and recordkeeping.
1. laboratory safety protocol
This document outlines the laboratory safety protocol for a microbiology laboratory course. It discusses the course assessments, which include quizzes, a midterm exam, and a final exam. It also describes the various biosafety levels based on the infectious agents being studied, with biosafety level 4 requiring the highest level of containment. The basic safety requirements for the microbiology laboratory are provided, including maintaining a clean work area, wearing protective clothing and closed-toe shoes, prohibiting food and drinks, proper pipetting techniques, hand washing, and autoclaving contaminated materials.
Lab safety and PPE and Biosafety levels
This document discusses lab safety and first aid. It defines hazard containment and safety awareness for lab personnel. It outlines employer responsibilities like establishing safety policies and providing training, and employee responsibilities like following safety methods. It covers basic lab safety, physical hazards like fire and electricity, chemical hazards, and biological hazards. It also discusses first aid kits, universal precautions, and first aid for lab accidents.
Laboratory safety
Detailed power point presentation of Laboratory safety specially working in bio hazardous situations.
Biological and chemical safety in the microbiology laboratory
laboratory safety in microbiology lab, how to avoid contamination from the microbes and how to perform practicals safely.
Spill control
This presentation discusses how to properly clean and decontaminate spills of blood and other potentially infectious materials in laboratories. It defines minor and major spills and outlines the appropriate response and cleanup procedures for each. Specific protocols are provided for cleaning spills on floors, benches, in biosafety cabinets, and centrifuges. Key steps include wearing proper PPE, covering spills with absorbent materials, applying an appropriate disinfectant for 20 minutes of contact time, and proper disposal of contaminated waste. The goal is to safely and effectively decontaminate any spilled infectious materials to prevent disease transmission.
Spill Response Training by New York Medical College
The document outlines NYMC's spill response training program which teaches employees to properly respond to chemical and biological spills according to regulatory standards and NYMC procedures. It details the assessment and notification process for spills and use of spill kits located in each lab. Employees are instructed to contact Security who will notify EHS for any spills they cannot safely handle themselves to ensure hazardous spills are properly contained and cleaned.
Laboratory Safety, Biomedical Waste & Its Management
Nowadays "Safety" takes up a major role in all the Laboratories, let it be safety equipment or safety measures. This powerpoint gives you a rough idea of the various hazards that may occur in a laboratory and the steps to be taken to prevent them. Also a small note is given on the Biomedical Waste and its management.
Chemical Hazards !!
Continue exposure to any Hazardous or toxic chemical by anyone will result in adverse effect on one’s health.
Lab safety rules and symbols Summary
The most dangerous thing in any laboratory is someone who doesn't know what they are doing. The document outlines many important lab safety rules regarding personal protective equipment, chemical handling, fire safety, first aid procedures, and cleanup. Key safety symbols are explained, such as wearing goggles and gloves when handling hot materials or chemicals. Proper disposal methods and treating animals and plants with care are also emphasized.
General Laboratory Safety Training by CSU
This document provides an overview of general laboratory safety rules and guidelines for California State University, Long Beach. It covers topics such as personal hygiene, housekeeping, protective equipment, chemical hazards, physical hazards, ventilation, and emergency response. The key points are that students must review the safety materials and complete a quiz to verify their understanding, abide by all safety practices, and ask questions before operating any equipment or using new materials. Protective equipment like gloves and goggles should be worn as appropriate. Chemical and physical hazards must be properly managed according to established procedures.
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...Atlantic Training, LLC.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan to address spill prevention, response, and reporting. It classifies spills as minor, intermediate, or major and describes the appropriate response actions for each. The document provides guidance on securing the site, removing the spill source, controlling and absorbing the spill, containerizing materials, reporting requirements, and protecting responders during a spill event. It emphasizes the importance of having a site-specific spill plan and standard operating procedures.Protocol for Chemical Spills Training by University of Northern Iowa
This document outlines protocols for responding to chemical spills. It discusses hazard awareness and preparation, including having necessary emergency equipment, knowledge of emergency procedures, and spill kits. It provides guidance on responding to minor spills, which can be cleaned up with available supplies, and major spills, which require evacuating the area and contacting authorities. The document also discusses spill prevention best practices like avoiding clutter and only having necessary chemicals available.
Health and Safety in the Laboratory by OSHA
The document discusses health and safety best practices for school laboratories, including identifying hazards, implementing engineering and administrative controls like proper ventilation and training, using personal protective equipment, complying with OSHA regulations, and properly handling chemical storage, waste disposal, and emergency situations. Maintaining a safe lab requires assessing hazards, having appropriate safety equipment and training procedures, and properly managing chemical inventory, storage, and disposal.
Spill Prevention and Control Training by USMRA
The document outlines regulatory requirements and best practices for spill prevention, control, and emergency response. It discusses using proper containers and storage, training, and secondary containment to prevent spills. Emergency response plans should establish personnel roles, communication, and procedures for evacuation, decontamination, and medical treatment. The spill response leader is responsible for overall command and coordination with authorities, and must be clearly designated in the written plan. Post-incident evaluation includes determining the cause and lessons learned.
Viewers also liked (19)
An Introduction to Chemstore | Hazardous Materials Experts
An Introduction to Chemstore | Hazardous Materials Experts
Is It Safe? A Cautionary Tale and Practical Guide to Laboratory Safety and C...
Is It Safe? A Cautionary Tale and Practical Guide to Laboratory Safety and C...
Biological and chemical safety in the microbiology laboratory
Biological and chemical safety in the microbiology laboratory
Spill Response Training by New York Medical College
Spill Response Training by New York Medical College
Laboratory Safety, Biomedical Waste & Its Management
Laboratory Safety, Biomedical Waste & Its Management
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...
Protocol for Chemical Spills Training by University of Northern Iowa
Protocol for Chemical Spills Training by University of Northern Iowa
Similar to Safety
SCS Safety Training (2).pdf
This document provides a summary of workplace safety training on hazards including chemicals, physical hazards, ergonomics, electricity, and required protections. It outlines common chemical hazards like welding fumes and their health effects. It describes physical hazards like noise, vibration, heat and their controls. Proper use of personal protective equipment, engineering and administrative controls are emphasized. Electrical safety topics covered include arc flash, shock, proper use of GFCIs and following lockout/tagout procedures. Employer responsibilities for ensuring safety are also reviewed.
Lab safety 19062019.ppt
This document outlines general laboratory safety guidelines. It discusses why laboratory safety is important to protect workers, visitors, and the work. Laboratory hazards include fire, sharps, spills, pressure equipment, chemicals, and biological and radiation hazards. The key aspects of laboratory safety are to identify hazards, evaluate risks through assessments, and control risks following a hierarchy of controls. Control measures include elimination, substitution, engineering controls, administrative controls, and personal protective equipment. Proper hygiene, waste disposal, chemical storage, emergency procedures, and incident reporting are also covered.
fire and emergency egress personal protective equipment,Accident and emergency
The document discusses the three components needed for a fire: fuel, heat, and oxygen. It then describes different types of fires that can occur from ordinary combustibles, flammable liquids, electrical equipment, and some metals. The rest of the document provides information on how to prevent fires, what to do in the event of a fire, fire safety tips, and an overview of personal protective equipment (PPE) including examples of different types of PPE like eye protection, respiratory protection, head protection, foot protection, hand protection, and hearing protection.
Working safely with chemicals
This document provides an overview of chemical safety concepts including toxicity, hazards, safe handling and storage of chemicals, disposal of chemicals, and emergency procedures. It discusses key topics such as permissible exposure limits, standard operating procedures, material safety data sheets, physical and health hazards of chemicals, routes of exposure, personal protective equipment, flammability classifications, signs and symptoms of exposure, and emergency response. The document emphasizes the importance of planning, training, labeling, using proper handling techniques and protective equipment, and knowing emergency procedures in order to safely use and dispose of chemicals.
General Clinic Safety, Hazardous Waste & Infection Control
This document outlines various safety procedures and protocols for a dental clinic, including fire emergency procedures, electrical safety, eye protection, chemical safety, instrument processing, sharps handling, exposure incidents, and more. It emphasizes standard precautions like personal protective equipment and engineering controls to minimize risks of infectious disease transmission or other hazards in patient care activities. The exposure control plan aims to protect dental health care personnel through vaccination, training, and post-exposure follow-up if accidents occur.
Radiation Safety and Protection
This document discusses radiation protection and dosimetry. It describes the differences between deterministic and stochastic effects of radiation, noting that deterministic effects have thresholds and increase in severity with dose while stochastic effects have no threshold and increase in probability with dose. It also summarizes the use of thermoluminescent dosimeters (TLDs) to measure radiation exposure, including how TLD badges are constructed and used to monitor exposure levels. Proper radiation safety procedures are outlined, such as wearing protective equipment like lead aprons and TLD badges, maximizing distance from radiation sources, and using shielding.
General clinic safety hazardous waste infection control correct version quiz
This document outlines fire emergency procedures and safety protocols for a dental clinic. It provides instructions on what to do if a fire is discovered, how to operate fire extinguishers, evacuation procedures, and reporting fire incidents. It also details general safety hazards to be aware of, protective equipment requirements, hazardous waste handling, infection control protocols, and procedures for responding to occupational exposure incidents. The goal is to ensure the safety of all clinic staff and patients in the event of emergencies or exposure to hazards.
Lab safety Presentation by Dr Vinay Kumar
This document provides an orientation on laboratory safety for the synthesis and characterization of smart materials. It begins with an introduction to smart materials and how they can change properties in response to stimuli. Common types of smart materials and nanomaterials that are used are described. Synthesis methods like precipitation, sol-gel and hydrothermal synthesis are outlined. Characterization techniques such as XRD, SEM, TEM, FTIR are listed. Detailed safety precautions are provided for handling chemicals, operating equipment like autoclaves, and preventing exposure to hazards from UV light, radiation, electricity and gases. Proper handling of advanced instrumentation is also covered.
Laboratory safety
This document outlines various laboratory safety guidelines and procedures. It discusses the benefits of safety, as well as general safety practices regarding glassware, chemicals, electricity, heating, personal protective equipment, fire safety, first aid, chemical storage, and waste disposal. Specific hazards are identified, such as incompatible chemicals. The document emphasizes that following safety regulations and having proper training are essential for preventing accidents in the laboratory.
Paint MSDS.pdf
This safety data sheet provides information on aerosol spray paint product called METALSHIELD COLD GALV SILVER SPRAYPAK. It contains flammable gases like dimethyl ether and toluene. The product is classified as dangerous goods and poses fire, health and environmental hazards. Personal protective equipment including gloves and respirator is recommended when handling. The product information, first aid measures, storage, disposal and transport requirements are described to ensure safe use.
hazardsppt-180623023716.pptx
This document summarizes common industrial hazards and safety measures. It discusses four main types of industrial hazards: fire and explosion, electrical, chemical, and mechanical. For each type of hazard, it describes potential causes and recommendations for prevention and safety measures. The overall purpose is to raise awareness of hazards found in industrial work environments and promote safety best practices.
Mira 316 c sds
This document provides hazard and precautionary information for a product. It is classified as carcinogenic, mutagenic, and toxic to reproduction. It is also flammable as a liquid and solid. It may cause cancer, genetic defects, damage fertility or the unborn child, and cause serious eye damage and skin irritation. Precautions include obtaining instructions before use, wearing protective equipment, keeping away from heat and flames, and properly storing and disposing of the product. The product contains several hazardous chemicals including ethyl alcohol, n-methyl-2-pyrrolidone, and triethylamine. First aid measures and firefighting procedures are also described.
WORKSHOP ONE NOTES-1.docx
This document outlines various safety regulations for workshops. It discusses proper dress which includes wearing tight fitting clothes, protective footwear, and keeping hair and nails cut. Safe behaviors are avoiding carelessness, overcrowding, playing, and idling. Firefighting equipment should be easily located and refilled. Ladders must be made of tough materials and properly positioned. Work areas should be tidy, dry, and free of hazards. First aid kits must be accessible and restocked. The responsibilities of employers include maintaining safe equipment and environments, and properly training employees. Employees must take reasonable care for their own and others' safety. Regulations cover health and safety management, equipment, workplaces, and personal protective equipment. Electrical, fire, and
WORKSHOP ONE NOTES-DCE-2.docx
Workshop safety regulations outline proper dress, behavior, and equipment use. Personal protective equipment like protective clothing and footwear should always be worn. Firefighting equipment must be kept in good working condition and workers trained in its use. Untidiness and hazardous materials should be avoided. First aid kits must be accessible. Employers are responsible for providing a safe work environment and equipment, as well as training. Employees must take reasonable care of their and others' safety, and cooperate with health and safety procedures. Electrical, fire, and other hazards are addressed, along with guidelines for prevention and emergency response.
PPE
This document provides an overview of personal protective equipment (PPE) training requirements. It states that PPE training is mandated by OSHA regulations and teaches workers when PPE is necessary, how to properly use it, and its limitations. The training is based on hazard assessments conducted by supervisors to determine job-specific PPE needs. Common types of PPE covered include equipment for the head, eyes, face, hands, feet, body, hearing, and respiratory protection. Proper use, care, maintenance and cleaning of PPE is also outlined.
Laboratory safety
This document provides guidelines for laboratory safety in a quality control laboratory. It outlines various hazards that may be present in a laboratory and safety measures to address them. Key points covered include understanding chemical hazards through material safety data sheets, using proper personal protective equipment, safe storage and handling of chemicals, emergency procedures, and general safe work practices in the laboratory. The overall aim is to protect laboratory workers, colleagues, and the organization through planning and awareness of safety procedures.
TLE-DAY 2 SAFETY SIGNS.pptx
Safety signs are designed to warn of hazards and indicate mandatory safety actions. They can use words, symbols, or both. Safety symbols communicate important information to support safety during fires or when handling hazardous materials in labs. Common lab safety symbols indicate the presence of fire hazards, biological hazards, explosives, toxic chemicals, radiation, and identify required personal protective equipment. Physical safety symbols provide access to safety equipment like breathing masks, eyewash stations, and indicate safety requirements for areas.
CUF30107 Mod AA2 OHS Presentation
This presentation provides new and current employees with workplace health and safety information. It outlines policies and procedures to maintain a safe work environment in the applied design studio and workshops. It discusses common hazards like poor posture, lifting heavy objects, slips and trips. It also covers first aid, fire safety, reporting injuries, and emergency contact details.
PPE Training Module
The module and training concept for a new worker about the personal protective equipment. Learn about the PPE and how to use them properly.
Similar to Safety (20)
fire and emergency egress personal protective equipment,Accident and emergency
fire and emergency egress personal protective equipment,Accident and emergency
General Clinic Safety, Hazardous Waste & Infection Control
General Clinic Safety, Hazardous Waste & Infection Control
General clinic safety hazardous waste infection control correct version quiz
General clinic safety hazardous waste infection control correct version quiz
Safety
- 1. Safety measures in clinical laboratory M.Deepa SAFETY MEASURES IN CLINICAL LABORATORY -M.DEEPA
- 2. Introduction The safety and wellbeing of students, staffs and faculty come above all other considerations in the laboratories in any teaching and treating institute. This is not only a moral duty, failure to do so can constitute legal grounds for negligence suite.
- 5. Face shield Protective shoes Gloves Apron 1 2 3 4
- 7. Washing eyes Washing mouth Washing hands 1 2 3 3
- 15. Caution Remote handling device Film badge 1 2 3
- 21. Thank you