This document provides details about Sachin Kumar, an instrumentation engineer with over 9 years of experience in maintenance, projects, and design engineering. It includes information about his education, work experience with various companies and roles, responsibilities in each role, and the systems and software he has experience with. Key details include his Bachelor's degree in Electronics Engineering, experience commissioning various units like CCR/NHT and FCC, and working as an instrument engineer designing instrumentation and handling tenders.

1. Instrumentation Engineer with 9 years 6 Months’ experience
as Maintenance, Project & Design Engineer
Personal Data
Name : Sachin Kumar
Permanent Address : Sachin Kumar S/O Jai Singh, Vill:- Fazalpur Sundar Nagar
Dist :- Baghpat Uttar Pradesh Pin:-250345
Mobile : +971528172950
E-mail private : Sachin1509@gmail.com
Date of Birth : 15.09.1982
Civil Status : Married
Languages : English (Fluent both spoken and written), Hindi
Passport : F1620095 valid till 2015.
Education
Year Degree/ Diploma/ Examination Subject Institute/ University
2005 Bachelor of Engineering Electronics SVNIT Surat Gujarat
Work Experience
Total Experience : 9 Years & 6 Months
Role : Instrument Engineer
Engineering:
1. Detailed Engineering activities of preparation of data sheets, Instrument Index, orifice sizing
calculations, Control Valve sizing and selection, hook up drawings, layout drawings, MTO
preparation.
2. Sizing standards known ISA 75.01, API 520 Part 1, ISO 5167
Projects:
1. Inspection/ Witnessing/ Reviewing of Calibration, Installation, Pre commissioning and
commissioning activities in Unit: FCCU, CCR/NHT, ISOM/HRU, Blending Station.
2. Design review, installation, commissioning activities.
3. Control system DCS/ESD/F&G (Pre Commissining and Commissioning activities).
4. Cost estimation, manhour / manpower planning, progress/ schedule monitoring.
Units Commissioned as Instrument Engineer:
1. CCR/NHT
2. ISOM/HRU.
3. FCC.
Systems:
1. Yokogawa Centum VP/ Prosafe RS.
2. ABB AC 800
3. Intools
Field instruments Handled:
1. Control Valves, On/Off valves (Make- Fisher, Tyco, Dembla, Masoneilan, Metso).
2. Level transmitters like - DP type, Displacer type, Remote seal type, Radar type level sensor,
Nucleonic.
3. Flow meters like- Mass Flow meter, Magnetic Flow meters, Turbine flow meters, Rotameters,
Vortex flow meter, ultrasonic (Make- ABB, Rosemount, Micro motion, Panametrics)

2. Training Attended:
1. Yokogawa Centum VP and Prosafe-RS.
2. Machine Monitoring System.
Software:
1. Design Tool: SPI (Smart Plant Instrumentation), AutoCAD.
2. ERP: SAP.
3. Application: MS Excel, Outlook, Powerpoint, Word
June 2014 till date
Company : Target Engineering LLC
Project : Engineering (PNT Project ADGAS)
Location : ABU Dhabi, UAE
Position : Engineer
Role : Instrument Engineer (Design Engineer)
TARGET Engineering is a leading Oil & Gas Contractor with single source inhouse specialities for
Engineering, Procurement and Construction of Mechanical - Steel Structures & Piping, Electrical - Power,
Instrumentation & Controls, Civil - Industrial and Building Works and Marine Structures in both onshore
and offshore areas.
Job Profile: (Engineering)
1. Offer evaluation of various field instrument (Radar Level Transmitter, Temperature Transmitter, Orifice
Plate, On/Off Valve etc) preparation of TBE, Discussion with vendor and finalize technical
requirements.
2. FDS review with Honeywell for CTS custody transfer metering skid
3. Instrument index & loop drawing preparation & review
4. Tender scope study preparation of technical query, site visit, attending technical clarifiaction meeting
with client, preparation of MTO, vendor offer review for technical and commercial estimation of tender.
5. Presently working on tender of M/s ADGAS, M/s TAKREER & Saudi Aramko for various system &
field up-gradation work.
6. Tender MTO includes of various control system (DCS system, Vibration monitoring system & Fire
Alarm System).
.
May 2011 – May-2014
Company : HMEL (HPCL – Mittal Energy Limited)
Project : GGSRL Project
Location : Bhatinda, Punjab, India
Position : Assitant Manager
Role : Instrument Engineer (Projects Department)
HPCL-Mittal Energy Limited (HMEL) is a joint venture between Hindustan Petroleum Corporation Limited (HPCL) and
Mittal Energy Investment Pte Ltd, Singapore - a Lakshmi N Mittal Group Company. Both the JV partners hold a stake
of 49% each in the company, the rest 2% is held by financial institutions. HMEL is building a Grassroot oil refinery of 9
MMTPA at Bathinda in Punjab, called Guru Gobind Singh Refinery Project. The project is expected to be completed
in 2011.

3. Job Profile: (Construction, Commissioning & Projects)
1. Commissioning of MS Block (CCR/NHT, ISOM & HRU, MS & HSD Blending) unit
2. Responsible for System handover activities of FCCU Unit.
3. Manhour/ Manpower monitoring, progress/ schedule monitoring and necessary expediting activities.
4. Ensuring quality related activities from calibration activities to instrumentation related NDT activities.
5. Review of Engineering and report of deficiencies. Implementation of necessary modifications at site.
6. Performing engineering work related to the instrument design, procurement and construction aspects
for modification projects of revenue nature & capital projects handled by the refinery.
7. Studies and implements corrective measures and solutions to engineering problems.
8. Attended FAT of Chemtrol Analyzer System for HSD Blending.
9. Attended training at YIL, Bangalore on Centum VP.
10. Handling Engineering, Procurement & Execution of various MOC (Management of Change)
throughout the refinery in the running plant with full safety.
11. Preparation of construction materials Basic Rate Difference for adjustment in R.A. Bills.
12. To study B.O.Q and technical specifications for proper execution of contract specified items.
13. Handling sub-contractors working on project, for proper execution of work so as to meet the deadline
for on-time completion. Giving necessary Support and Training to sub-ordinates
14. Identifying the necessity of extra and deviated items and accordingly working on projected cost of
project. Preparation & verification of contractors R.A. Bill quantities as per mode of measurements
15. Keeping track on material status and raising material indent as per contract specification for on time
delivery of required material.
16. Reconciliation of construction materials (Fittings, cables, glands, etc.)
17. Preparation of Weekly & Monthly Progress Report (MIS Report).
18. Ensuring receipt of right quality and quantity of material and testing of same as per standards.
19. Monitoring safe working condition and safety activities on site. Capable of handling multiple
construction sites
Systems: YOKOGAWA Centum VP/ ProSafe RS
May 2008 – May2011
Company : Fluor Denial India Pvt Ltd
Location : Gurgaon Haryana India
Position : Engineer
Role : Instrument Design Engineer
Engineer (Instrumentation): Engineering Procurement & Construction (EPC) Div. Fluor Denial
India Private LTD Gurgaon New Delhi
1. Worked on deliverable of Instrument Index population of basic data & Index updates based on
FDCNs.
2. Preparation of PO Data Sheets for various instrument, involved in checking Model no. assigned
to instrument with respect of process & piping requirement & corrective action taken if required.
3. Studied Project Specification thoroughly, understanding various GOST standards to prepare
Instrument Data Sheets.
4. Involved in Preparing Various Instrument Data Sheet in Smart Plant Instrumentation like
Pressure Instrument:- Gauge & Transmitter ,Temperature:-Gauge , Transmitter, well & Element,
Level Instrument:- Transmitter (Guided Wave Radar & Cone) level Gauge,
Flow instrument:- Orifice Plate, Transmitter & Restriction Orifice, Venturi Tube & Annnubar Meter.
5. Preparation of Level Sketch, Control Valve, On-Off Valve Data Sheet.

4. 6. Involve in EDEN Activity preparing data base of inline instrument from Vendor Cut-Sheet &
Catalogue for piping model in Ultra-Edit Software.
7. Sizing done of Instrument like Orifice Plate, Control Valve, Thermowell Wake Frequency
Calculation.
8. Technical bid evaluation done of various Instruments & prepare technical query.
9. Piping ISOs Checking for Inline Instrument & Signoff.
10. Preparation of JB loading, Main cable schedule & Instrument cable schedule.
11. 6 Week Site Survey of Qatar Gas & Ras Gas refinery division at Ras Laffan City Doha
Qatar. Survey including following agenda:-
i) Safety training of Ras Gas & Qatar Gas.
ii) Survey Instrument Technical Room (ITR) for space to installed new cabinets, console.
Transit window & Cable laying under floor.
iii) Survey of Field Junction boxes, Cable Trench, Instrument Air header & Area for
installation of new instrument.
iv) Preparation of survey report & mark-ups on as-built drawings.
Oct’07 - May08
Company : GE India Pvt Ltd
Location : Bangalore, Karnataka India
Position : Engineer
Profile : Design & Engineering
General Electrical (GE): in Bangalore Centre worked with a team Handling Reciprocating Compressor
(RC),
Worked on:-
1. Involved in reviewing the design/engineering documents preparation of Specifications.
2. Studying the Detail Engineering Customer’s specifications and diagrams.
3. Involved in reviewing the design/engineering documents preparation of Specifications, BOM
Activity.
4. General Specification preparation for instrumentation considering NP (GE) Standard & customers
specs requirement.
5. Standardization Activity done for various instrument to improve the quality of work & reducing
Man Hour for Projects.
6. Preparation, Review & Modification of various document like, P&ID, Primary& Pneumatic hook-ups
7. Electrical Hook-up, Electrical Plant Layout, Pneumatic Plant Layouts, Field Instrument List.
8. Instrument selection for various service like (process gas, lube oil service, cooling water , steam)
June 2005 – Oct 2007
Company : Essar Oil Ltd
Location : Jamnagar, Gujarat, India
Position : Assistant Manager
Profile : Project & Maintenance.
ESSAR OIL LTD is a 14.0 MMTPA Refinery in Jamnagar, Gujarat a company of the ESSAR GROUP.
ESSAR GROUP is a multinational conglomerate and a leading player in the sectors of Steel, Oil & Gas,
Power, Communications, Shipping Ports & Logistics, Construction and Minerals. With operations in more
than 20 countries across five continents, the group employs 60,000 people, with revenues of about USD
15 billion.

5. Installation & Calibration
1. Installation and calibration for:
Control Valves Pressure Transmitters Thermocouples
Pressure Gauge Temperature Gauge Pressure Safety Valve
Pressure Switch Pressure Regulating Valve Other Instrument
2. Evaluation of Instrument Data Sheets, Process Data Sheets, Adequacy Check Reports and Sizing
Sheets. Preparing list of instrument, detailed instrument specific.
4. Played a stellar role in identifying missing links and discrepancies between the various
instrumentation documents: P&ID’s, Instrument Index, Alarm and Trip setting lists etc.
5. Overseen Technical Bid Evaluation of vendor quotations.
Site Management
1. Coordinating with others for preparation of Receipt of Instruments at site for Erection, Loop
checking, checking various Flame Detectors (UV, IR & Ionization Rod used in Heaters)
2. Undertaking Maintenance of various instruments: Fisher Make Control Valve Shut of valve used in
Heaters, Pressure TX, and Flow TX.
3. Modification done in Installation some of instrument to get better efficiency in Hazardous Location
4. Handled a team of GET, DET & skilled Man Power ( No.- 25) very efficiently & getting done all
activity on time.
Logic Interlock Checking & Implementation
1. NP make Compressors one Stage & Two Stage
2. Borsig Make Turbine running compressor
3. York make Chiller Package Compressors
4. LHT Heaters
5. Plant ESD For CCR/NHT AREA
6. Sequence Checking for NAT AREA
Instrument Handled (Installation, Testing, Commissioning and Maintenance):
ESD: ABB DCS: ABB Analyzers: Chemptrols
Governors: Woodward Level: Nucleonic
Reference:
Arjun Singh Shekhawat | Manager-Projects | HPCL-Mittal Energy Ltd |
Village Phullokhari, Taluka:- Talwandi Saboo, Bhatinda - 151301| Punjab | INDIA |
( +91 1655-272923 (Office) |M +91 9988881660 |
arjun.shekhawat@hmel.in|" www.hmel.in |
Digvijay Dhama | Design Engineer | KENTZ Engineering & Construction
Dubai UAE
M| +971562630855

6. Installation & Calibration
1. Installation and calibration for:
Control Valves Pressure Transmitters Thermocouples
Pressure Gauge Temperature Gauge Pressure Safety Valve
Pressure Switch Pressure Regulating Valve Other Instrument
2. Evaluation of Instrument Data Sheets, Process Data Sheets, Adequacy Check Reports and Sizing
Sheets. Preparing list of instrument, detailed instrument specific.
4. Played a stellar role in identifying missing links and discrepancies between the various
instrumentation documents: P&ID’s, Instrument Index, Alarm and Trip setting lists etc.
5. Overseen Technical Bid Evaluation of vendor quotations.
Site Management
1. Coordinating with others for preparation of Receipt of Instruments at site for Erection, Loop
checking, checking various Flame Detectors (UV, IR & Ionization Rod used in Heaters)
2. Undertaking Maintenance of various instruments: Fisher Make Control Valve Shut of valve used in
Heaters, Pressure TX, and Flow TX.
3. Modification done in Installation some of instrument to get better efficiency in Hazardous Location
4. Handled a team of GET, DET & skilled Man Power ( No.- 25) very efficiently & getting done all
activity on time.
Logic Interlock Checking & Implementation
1. NP make Compressors one Stage & Two Stage
2. Borsig Make Turbine running compressor
3. York make Chiller Package Compressors
4. LHT Heaters
5. Plant ESD For CCR/NHT AREA
6. Sequence Checking for NAT AREA
Instrument Handled (Installation, Testing, Commissioning and Maintenance):
ESD: ABB DCS: ABB Analyzers: Chemptrols
Governors: Woodward Level: Nucleonic
Reference:
Arjun Singh Shekhawat | Manager-Projects | HPCL-Mittal Energy Ltd |
Village Phullokhari, Taluka:- Talwandi Saboo, Bhatinda - 151301| Punjab | INDIA |
( +91 1655-272923 (Office) |M +91 9988881660 |
arjun.shekhawat@hmel.in|" www.hmel.in |
Digvijay Dhama | Design Engineer | KENTZ Engineering & Construction
Dubai UAE
M| +971562630855