Sharat Chandra Pathak is an instrumentation engineer with close to 5 years of experience in engineering and design for oil, gas, and chemical projects. He has worked on projects in India and Saudi Arabia, handling tasks like instrument specification, sizing, procurement management, and technical bid evaluation. Pathak has a B.Tech in Electronics and Instrumentation Engineering and is proficient in software like SPI INtools and AutoCAD.
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
Responsibilities: E&I QA/QC
Responsibilities for Field Inspection as per Inspection Testing Plan (ITP’s) Related (E&I)
Jobs.QA/QC with the help of specification, drawings.
Inspection for Material Receiving related Electrical, Instrument as per Indent, Delivery
Note.
Inspection for Cable Laying (E & I) in Cable Trays, Trenches as per cross-sectional
drawings.
Inspection for Cable Trays (E&I) Installation (Perforated, Ladder, Mesh) as per drawing.
Responsible for all Red Marks/As Built drawing as per site modification.
Inspection for Lighting Installation as per circuit diagram, Panel Installation,Transformer
installation.
Inspection for Heating Tracing cables and Testing.
Having Good Knowledge of (NEC) National Electrical Code.
American Petroleum Institute (API ) Standards
IEC- international ELECTROTECHNICAL Commission Standards.
Inspection for the Installation of MCT’s.
Inspection for Lightning Protection (Lightning Arresters).
Inspection for EARTHING Cable Laying, CAD Weld - Exothermic Weld joints,
Earth Bus Bar, EARTHING Test.
Inspection for Motor Installation, Resistance/IR test & Motor torque test.
Inspection for Cable Continuity/IR, Cable termination, EARTHING test.
Prepare the NCR, CAR, TQ, ITP, and Method Statements & RFI’S.
Complete QA/QC Documentation as per Project specification.
Inspection for calibration of PI, PDIT, PT, TT, TE, FT, LT.
Functional Test of Ultrasonic Transmitters, LSL, LSH, LSHH, AT.
Inspection for Field Instrument Installation (PT,FT, LT, Control Valves as per Hook up drawing)
Inspection for Impulse Line Leak test.
Inspection for JB’S Installation, Panels, Cabinets Installation.
Preparing the complete Loop Folders like(DI,DO,AI,AO,RTD for Loop Checking Pre-
Commissioning with the attachments of Instrument loop package index, Functional loop test CR,
Material Receiving Calibration CR, Instrument Installation CR Instrument index, instrument Loop
Diagram & P& ID’S.
Responsible for clear the Punch Points.
Prepare the Final Dossier as per client HOS and Hand over to Mechanical Completion
Department (MC)
Final Walk Down of Hand over System (HOS) with Client.
• Coordinating with Construction Supervisor project plan drawing review (having AFC drawing officially approved documentation.)
• Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.
• Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all concerned lead official.
• Ensures instrument equipment works are compliant with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing the ISO 9000).
• Supervision and monitoring the flow of inspection on-site and calibration prior to meet the project deadline.
• Monitors all subcontractor activity priors for deadline start of Instrumentation Workload
I have total experience of 20+ years in the field of Construction and Project management of instrumentation projects with various reputed establishments. I was holding the post of Instrument Engineer with M/s. Daelim Saudi Arabia Co. Ltd. (EPC) Saudi Arabia, till May2016.
During the course of my tenure, I have developed high level of Managerial and Technical proficiency by working with highly reputed establishments in various countries
1. CURRICULUM VITAE
INSTRUMENTATION ENGINEER
SHARAT CHANDRA PATHAK, Contact No. +918800142880
NOIDA (Delhi NCR)
PROFESSIONAL SUMMARY
Instrumentation Engineer with close to 5 years of relevant experience in Engineering & Design
activities (EPC) in Oil & Gas and Chemicals in both domestic and International Projects. Experience
of working LSTK Projects, Basic & Detailed Engineering, Tendering and Bidding.
STRENGTHS
Possess knowledge and understanding of Basic and Detailed Engineering.
Worked on software tools like Smart Plant Instrumentation Engineering Module (SPI
INtools) and AutoCAD.
Selection & Sizing of various Instruments: Including transmitters, Flow Meters, Control
Valves, Pressure Safety Valves and Gauges.
Technical Bid Evaluation of Instruments.
Experience in Client Handling and Closing technical issues with clients.
Procurement Management.
WORK EXPERIENCE
Organization: Nuberg Engineering Limited, Noida.
Designation: Instrumentation Engineer
Duration: January 2015- Till Date
Projects: 1) Flare Stack Installation and Other Installations at Cauvery Asset ONGC.
Project Location- Karikal
Client-ONGC (Oil & Gas)
2) Chemical Specialty Plant
Project Location- Jubbail, Saudi Arabia
Client- ADDAR
Job Profile:
Checking and review of P&I Diagram.
Preparation of Instrument Index List & I/O List.
Preparation of Instrument specifications sheet for field Instruments.
Sizing of Flow elements, Control Valves, Safety Relief valves, Thermowell
etc.
Preparation of Hook-Up Diagram and related MTO.
Preparation of Level Sketches.
Preparation Instrument Cable Schedule and JB Schedule.
Instrument location layout, Cable Tray layout.
Preparation of Technical Bid Evaluation of Instruments.
2. Vendor Package Evaluation.
Preparation technical Data sheets for all instruments as per the project schedule for
freezing the technical specs & taking Clients approval
Participation in Hazop study.
Knowledge of Fire Fighting.
Organization: Technip on third Party Payroll
Designation: Instrumentation Engineer
Duration: July 2014- December 2014
Projects: 1) ROGC (Reliance off Gas Cracker) Project, Jam Nagar Gujarat.
Location- Noida
Contractor- Technip KT India Limited
Preparation of Instrument Index List.
Preparation of Data sheets for all Transmitters (LT, PT, TT and FT) in SPI
INtools.
Sizing and selection of Flow Elements.
Data Sheets for Pressure Gauge, Level Gauge and Temperature Gauge.
Worked in Indexing, Specification, Calculation and Binders module in SPI
9.0.
Preparation of Technical Sheet for Vendor Document Evaluation.
Technical Bid Evaluation.
Organization: M/s Davit Technologies
Designation: Instrumentation Engineer
Duration: March 2012 – July 2014
Projects: 1) Refinery & Petrochemical
Owner- Suncor Energy-Canada
Licensor and PMC - Samsung Engineering.(On third party payroll)
2) Carbon and Black Delayed Coker
Location - Abu Dhabi
Contractor- Samsung Engineering
Job Profile and Activities:
Preparation of Instrument Index List,
Preparation of Instruments Input/output Lists (I/O-list),
Preparation of Specification sheets for all Transmitters (LT, PT, TT and FT) in
SPI INtools.
Preparation of Specification sheets for control valves.
Sizing and selection of Flow Elements( Orifice Plate)
3. Preparation of Instrument Installation Detail (Hook-up diagrams).
Organization: CIMFR, Dhanbad (CSIR Body)
Designation: Instrumentation Engineer
Duration: March January 2009 – March 2012
Projects: Qualitative and quantitative Estimation of CBM Gas from Different Coal
CBM Blocks.
Job Profile and Activities Performed:
Design and Development of adsorption Isotherm equipment.
Design and development of Desorption set-up.
Prepare data sheets for Transmitters and gauges.
Gas Sampling and working on Gas Chromatograph.
Sample injection and carry out gas analysis of CBM gas.
Calibration of Gas Chromatograph.
Visit Mines with Handheld Gas analyzers to analyze CMM potential.
Carry Out high Pressure Adsorption Isotherm experiment.
Desorption study of coal samples.
ACADEMIC CREDENTIALS
• B-Tech in Electronics and Instrumentation Engineering from Dr B C Roy Engineering
College, Durgapur with 7.43 DGPA.
PERSONAL DETAILS
Date of Birth: 12th
january1984
Sex: Male
Nationality: Indian
Fathers Name: Awadhesh Kumar Pathak
Marital Status: Unmarried
Permanent Address: Dhanbad, Jharkhand.
Languages Known: English, Hindi and Bengali
Passport Details: G6384394