The document describes the development of a dopamine biosensor based on a polyaniline/carbon quantum dots (PANi/CQDs) composite. The PANi/CQDs composite was characterized using various techniques and showed absorption and fluorescence properties. For the electrochemical biosensor, an electrospun nanofiber film of PANi/CQDs was fabricated on an electrode. It demonstrated good sensitivity for dopamine detection with a linear range of 10-90 μM. For the fluorescent biosensor, the fluorescence intensity of PANi/CQDs decreased with increasing dopamine concentrations, showing a linear range of 0.1-100 μM. The PANi/CQDs composite is a promising material for sensitive dopamine detection.
Novel Conductive Nano-composite Ink Based on Poly Aniline, Silver Nanoparticl...Khaled Abdel-Razeq
Novel Conductive Nano-composite Ink Based on Poly Aniline, Silver Nanoparticles and Nitrocellulose
Egypt. J. Chem. 59, No. 4, pp. 429 - 443 (2016)
http://ejchem.js.iknito.com/article_1101.html
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Polypyrrole/PZT Thermistor: An Effective pre-cursor towards sensor designIJERA Editor
Pristine Polypyrrole was prepared by employing inverse emulsion polymerization technique using
Methanesulfonic acid as a dopant and sodium lauryl sulfate (SLS) as a surfactant. Oxidizing agent used was
Potassium Persulfate. An attempt was made to formulate a Polypyrrole device by blending Polypyrrole with
Lead Zirconate Titanate (PZT) piezoceramic powder which showed characteristics akin to a Thermistor thereby
formulating its use as a pre-cursor to a temperature sensor upon Current vs. Voltage as well as Temperature vs.
Conductivity studies. Characterization studies of Polypyrrole/PZT blends using Fourier Transform Infrared
Spectra, Scanning Electron Microscopy and X-ray diffraction studies yielded satisfactory and confirmatory
results. Extensive conductivity studies were carried out from 298 K - 383 K and Conductivity as high as 3.97
S•cm-1 was obtained at a surfactant and dopant concentration of 9.0 g and 11.0 g respectively. Liquid Phase
Sintering of Ppy/PZT blends with Tin (Sn) metal powder offers exciting opportunity towards formulation of a
temperature sensor, the diffusivity studies of which are still underway.
Rapid Prediction of Extractives and Polyphenolic Contents in Pinus caribaea B...Waqas Tariq
The potential of near infrared reflectance spectroscopy (NIRS) for rapidly and accurately determining the extractives and polyphenol contents in Pinus caribaea bark extracts was assessed. Pinus caribaea bark samples were obtained from 110 trees in plantation stands at different locations of Ghana and were then scanned by NIRS. Their extractives and polyphenol contents reference values were obtained by TAPPI T204 om-88 and Folin-Ciocalteu methods respectively. These reference values were regressed against different spectral transformations using partial least square (PLS) regression. First derivative transformation equation of the raw spectral data, resulted in a coefficient of determination r2 in the external validation of 0.91 and 0.97 respectively for extractives content and polyphenol content. The calibration samples covered a wide range of extractives content from 34 – 45% and polyphenolic content from 16 – 23.5%. The standard deviation to root mean square error of cross validation ratio (SD/RMSECV), root mean square error of calibration to standard deviation ratio (RMSEC/SD), RMSECV/RMSEC and r2 for both extractives and polyphenol models were indicative of good prediction equations. The predicted values were thus highly correlated with time-consuming wet chemical measured values of extractives content and polyphenol content. The use of NIRS for the determination of the extractives and polyphenol contents in Pinus caribaea bark thus provides an advantage of time saving and cost of analysis.
Simultaneous voltammetric determination of paracetamol anddomperidone based o...Pramod Kalambate
Graphene oxide and hexachloroplatinic acid were electrochemically reduced on a glassy carbon elec-trode (GCE) surface so as to form a graphene (Gr)–platinum nanoparticles (PtNP) composite. This nanocomposite was then coated with nafion (NAF) film so as to form NAF/PtNP/Gr/GCE. In this work, anelectrochemical method based on adsorptive stripping square wave voltammetry (AdSSWV) employ-ing NAF/PtNP/Gr/GCE has been proposed for the subnanomolar determination of paracetamol (PCT) anddomperidone (DOM) simultaneously. The electrode material was characterized by scanning electronmicroscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The electrochemical perfor-mance of PCT and DOM on modified electrode was investigated by cyclic voltammetry, electrochemicalimpedance spectroscopy, and chronocoulometry. A sixteen fold enhancement in the AdSSWV signal wasobserved at NAF/PtNP/Gr/GCE in pH 6.0, phosphate buffer, as compared to GCE. Under the optimized con-ditions, the method allowed simultaneous determination of PCT and DOM in the linear working range of8.2 × 10−6–1.6 × 10−9M with detection limits (3 × SD/s) of 1.06 × 10−10and 4.37 × 10−10M for PCT andDOM respectively. The practical analytical utilities of the modified electrode were demonstrated by thedetermination of PCT and DOM in pharmaceutical formulations, human urine, and blood serum samples.This proposed method was validated by HPLC and the results are in agreement at the 95% confidencelevel. Simultaneous voltammetric determination of PCT and DOM has been reported for the first time.
Novel Conductive Nano-composite Ink Based on Poly Aniline, Silver Nanoparticl...Khaled Abdel-Razeq
Novel Conductive Nano-composite Ink Based on Poly Aniline, Silver Nanoparticles and Nitrocellulose
Egypt. J. Chem. 59, No. 4, pp. 429 - 443 (2016)
http://ejchem.js.iknito.com/article_1101.html
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Polypyrrole/PZT Thermistor: An Effective pre-cursor towards sensor designIJERA Editor
Pristine Polypyrrole was prepared by employing inverse emulsion polymerization technique using
Methanesulfonic acid as a dopant and sodium lauryl sulfate (SLS) as a surfactant. Oxidizing agent used was
Potassium Persulfate. An attempt was made to formulate a Polypyrrole device by blending Polypyrrole with
Lead Zirconate Titanate (PZT) piezoceramic powder which showed characteristics akin to a Thermistor thereby
formulating its use as a pre-cursor to a temperature sensor upon Current vs. Voltage as well as Temperature vs.
Conductivity studies. Characterization studies of Polypyrrole/PZT blends using Fourier Transform Infrared
Spectra, Scanning Electron Microscopy and X-ray diffraction studies yielded satisfactory and confirmatory
results. Extensive conductivity studies were carried out from 298 K - 383 K and Conductivity as high as 3.97
S•cm-1 was obtained at a surfactant and dopant concentration of 9.0 g and 11.0 g respectively. Liquid Phase
Sintering of Ppy/PZT blends with Tin (Sn) metal powder offers exciting opportunity towards formulation of a
temperature sensor, the diffusivity studies of which are still underway.
Rapid Prediction of Extractives and Polyphenolic Contents in Pinus caribaea B...Waqas Tariq
The potential of near infrared reflectance spectroscopy (NIRS) for rapidly and accurately determining the extractives and polyphenol contents in Pinus caribaea bark extracts was assessed. Pinus caribaea bark samples were obtained from 110 trees in plantation stands at different locations of Ghana and were then scanned by NIRS. Their extractives and polyphenol contents reference values were obtained by TAPPI T204 om-88 and Folin-Ciocalteu methods respectively. These reference values were regressed against different spectral transformations using partial least square (PLS) regression. First derivative transformation equation of the raw spectral data, resulted in a coefficient of determination r2 in the external validation of 0.91 and 0.97 respectively for extractives content and polyphenol content. The calibration samples covered a wide range of extractives content from 34 – 45% and polyphenolic content from 16 – 23.5%. The standard deviation to root mean square error of cross validation ratio (SD/RMSECV), root mean square error of calibration to standard deviation ratio (RMSEC/SD), RMSECV/RMSEC and r2 for both extractives and polyphenol models were indicative of good prediction equations. The predicted values were thus highly correlated with time-consuming wet chemical measured values of extractives content and polyphenol content. The use of NIRS for the determination of the extractives and polyphenol contents in Pinus caribaea bark thus provides an advantage of time saving and cost of analysis.
Simultaneous voltammetric determination of paracetamol anddomperidone based o...Pramod Kalambate
Graphene oxide and hexachloroplatinic acid were electrochemically reduced on a glassy carbon elec-trode (GCE) surface so as to form a graphene (Gr)–platinum nanoparticles (PtNP) composite. This nanocomposite was then coated with nafion (NAF) film so as to form NAF/PtNP/Gr/GCE. In this work, anelectrochemical method based on adsorptive stripping square wave voltammetry (AdSSWV) employ-ing NAF/PtNP/Gr/GCE has been proposed for the subnanomolar determination of paracetamol (PCT) anddomperidone (DOM) simultaneously. The electrode material was characterized by scanning electronmicroscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The electrochemical perfor-mance of PCT and DOM on modified electrode was investigated by cyclic voltammetry, electrochemicalimpedance spectroscopy, and chronocoulometry. A sixteen fold enhancement in the AdSSWV signal wasobserved at NAF/PtNP/Gr/GCE in pH 6.0, phosphate buffer, as compared to GCE. Under the optimized con-ditions, the method allowed simultaneous determination of PCT and DOM in the linear working range of8.2 × 10−6–1.6 × 10−9M with detection limits (3 × SD/s) of 1.06 × 10−10and 4.37 × 10−10M for PCT andDOM respectively. The practical analytical utilities of the modified electrode were demonstrated by thedetermination of PCT and DOM in pharmaceutical formulations, human urine, and blood serum samples.This proposed method was validated by HPLC and the results are in agreement at the 95% confidencelevel. Simultaneous voltammetric determination of PCT and DOM has been reported for the first time.
Hollow-Polyaniline-Sphere-Coated Sensor For Measuring Gas-Phase OH Radicals A...IJERA Editor
In advanced oxidation processes, OH radicals play a crucial role in enhancing the removal efficiency of volatile
organic compounds. In this paper, hollow polyaniline (PANI) spheres were coated onto a conducting ceramic
honeycomb substrate to form a PANI sensor for detecting the concentration of OH radicals in the amorphous
phase. The hollow PANI spheres were effectively synthesized through a double-surfactant-layer-assisted
polymerization process by using Fe3O4 nanoparticle as the core template. The PANI shell thickness, morphology
characterizations and specific surface area were controlled by altering the weight of aniline monomers. The
electrical conductivity served as a function of the operating temperature and specific surface area, which is a
characteristic behavior of conductive polymer materials in the atmosphere. At an optimized temperature of
125°C and specific surface area of 1435 m2
/g, the PANI sensor reacted with a high amount of OH radicals
generated from the decomposition of ozone over α–FeOOH nanoparticles. The conductometric response after the
OH radical attack increased exponentially with the concentration of the OH radicals.
Chemical sensing and imaging using fluorophore-conjugated cellulose nanocrystalsPawan Kumar
Here, we report the use of highly fluorescent zinc phthalocyanine-conjugated cellulose nanocrystals (ZnPc@CNC) for chemical sensing and imaging applications. Cellulose nanocrystals (CNCs) are crystalline nanorods synthesized through the acid hydrolysis of cellulosic resources like wood pulp, cotton fibers, carded hemp, etc. and lab-synthesized octacarboxylated zinc phthalocyanine molecules are conjugated to these CNCs forming a brightly fluorescent-conjugated molecular aggregate (ZnPc@CNC), which was then used in both liquid suspensions and solution-processed thin films. ZnPc@CNC conjugates showed reproducible and reliable photoluminescence (PL) quenching behavior when exposed to terephthalic acid (TA) of concentration 0.2 mM to 0.8 mM. The PL sensing of TA followed modified Stern-Volmer kinetics with the Stern-Volmer constant (Kapp) determined to be 147.1 M-1. The mechanism of sensing involves the change in the electron density of the π-conjugated phthalocyanine metallocycle core due to the strong electronic interaction with the benzenedicarboxylic acid. This work opens the way to conjugating several other chromophores and fluorophores to CNCs for colorimetric and fluorescence-based chemical sensing using paper-like films and membranes. Likewise, highly emissive ZnPc@CNC nanocomposites were shown to behave as fluorescent staining agents on the surface of TiO2 microrods. This technique can be used to render non-fluorescent micro- and nanomaterials emissive, enabling them to be imaged using fluorescence microscopy
Synthesis, Characterization of ZnS nanoparticles by Coprecipitation method us...IOSR Journals
ZnS nanoparticles are prepared by coprecipitation method using various capping agents like PVP (polyvinylpyrrolidone), PVA (polyvinylalcohol) and PEG-4000 (polyethyleneglycol). These are characterized by UV-Visible spectra, X-ray diffraction (XRD) studies, Fourier Transform Infra-red spectra (FTIR) and Transmission electron microscopy (TEM). UV-Visible absorption spectra are used to find the optical band gap and the values obtained have been found to be in the range of 3.80-4.00eV. The particle size of nanoparticles calculated from XRD pattern has been in the range of 2-4 nm. It is also observed that the particle size of nanoparticle is affected by the nature of capping agent. Photo catalytic degradation of xylenol orange (XO) by the nanoparticles shows that these act as photo catalysts under sunlight irradiation. The XO dye was degraded more than 87.24, 83.42 and 73.05% in the presence of PEG-4000, PVA and PVP capped ZnS nanoparticles in 120, 150 and 180 min. respectively. The kinetics of catalyzed by synthesized ZnS nanoparticles with XO dye follows pseudo-first order kinetics with reasonable apparent rate constants.
Growth, structural, optical, electrical and SHG studies of N-N′ allylthiourea...IJERA Editor
Potassium Dihydrogen Phosphate (KDP) crystals are one of the most popular crystals used for Non-linear
Optical (NLO) applications. Pure KDP single crystals and KDP crystals doped with N-N′ allylthiourea were
grown by the method of slow evaporation from aqueous solutions. The grown pure and doped crystals were
confirmed by X-ray single crystal and powder diffraction studies. The pure and doped crystals were
characterized by FTIR spectroscopy studies. Absorptions of these grown crystals were analyzed using UV–Vis–
NIR studies, and it was found that these crystals possess minimum absorption in the entire visible region.
Nonlinear optical studies of pure and doped crystals were carried out and it reveals that the dopants have
increased the efficiency of KDP crystals. Dielectric measurements were carried out along both the unique axis
and perpendicular directions at various temperatures ranging from 40 to 150 °C. The dielectric constant and the
dielectric loss values of N-N′ allylthiourea doped KDP crystals were lower than the pure KDP crystals. Also, it
indicates that 0.8 mole% N-N′ allylthiourea addition to KDP leads to low permittivity value dielectrics. The
results are discussed.
A novel label-free cocaine assay based on aptamer-wrapped single-walled carbo...Nanomedicine Journal (NMJ)
Objective(s):
This paper describes a selective and sensitive biosensor based on the dissolution and aggregation of aptamer wrapped single-walled carbon nanotubes. We report on the direct detection of aptamer–cocaine interactions, namely between a DNA aptamer and cocaine molecules based on near-infrared absorption at λ807.
Materials and Methods:
First a DNA aptamer recognizing cocaine was non-covalently immobilized on the surface of single walled carbon nanotubes and consequently dissolution of SWNTs was occurred. Vis-NIR absorption (A807nm) of dispersed, soluble aptamer-SWNTs hybrid, before and after incubation with cocaine was measured using a CECIL9000 spectrophotometer.
Results:
This carbon nanotube setup enabled the reliable monitoring of the interaction of cocaine with its cognate aptamer by aggregation of SWNTs in the presence of cocaine.
Disscusion:
This assay system provides a mean for the label-free, concentration-dependent, and selective detection of cocaine with an observed detection limit of 49.5 nM.
Synthesis and Characterization of Novel Nanomaterials for SERS Biomedical/Env...Necla YÜCEL
In this study, a simple green method was employed to synthesize functionalized silver nanoparticles (Ag NPs) as surface-enhanced Raman scattering (SERS) substrate for detection of dopamine (DA). In this method, polyethylene glycol (PEG) was functionalized on silver nanoparticles to prepare the uniform and controlled size of nanoparticles (NPs). The optical and structural properties of functionalized nanoparticles were characterized. The Raman spectra of the prepared PEG-Ag SERS substrate clearly indicated an enhancement in the SERS signal of dopamine. The developed functionalized SERS substrate can be potentially used as a sensitive SERS substrate for detection of various neurotransmitters for biomedical application.
Hollow-Polyaniline-Sphere-Coated Sensor For Measuring Gas-Phase OH Radicals A...IJERA Editor
In advanced oxidation processes, OH radicals play a crucial role in enhancing the removal efficiency of volatile
organic compounds. In this paper, hollow polyaniline (PANI) spheres were coated onto a conducting ceramic
honeycomb substrate to form a PANI sensor for detecting the concentration of OH radicals in the amorphous
phase. The hollow PANI spheres were effectively synthesized through a double-surfactant-layer-assisted
polymerization process by using Fe3O4 nanoparticle as the core template. The PANI shell thickness, morphology
characterizations and specific surface area were controlled by altering the weight of aniline monomers. The
electrical conductivity served as a function of the operating temperature and specific surface area, which is a
characteristic behavior of conductive polymer materials in the atmosphere. At an optimized temperature of
125°C and specific surface area of 1435 m2
/g, the PANI sensor reacted with a high amount of OH radicals
generated from the decomposition of ozone over α–FeOOH nanoparticles. The conductometric response after the
OH radical attack increased exponentially with the concentration of the OH radicals.
Chemical sensing and imaging using fluorophore-conjugated cellulose nanocrystalsPawan Kumar
Here, we report the use of highly fluorescent zinc phthalocyanine-conjugated cellulose nanocrystals (ZnPc@CNC) for chemical sensing and imaging applications. Cellulose nanocrystals (CNCs) are crystalline nanorods synthesized through the acid hydrolysis of cellulosic resources like wood pulp, cotton fibers, carded hemp, etc. and lab-synthesized octacarboxylated zinc phthalocyanine molecules are conjugated to these CNCs forming a brightly fluorescent-conjugated molecular aggregate (ZnPc@CNC), which was then used in both liquid suspensions and solution-processed thin films. ZnPc@CNC conjugates showed reproducible and reliable photoluminescence (PL) quenching behavior when exposed to terephthalic acid (TA) of concentration 0.2 mM to 0.8 mM. The PL sensing of TA followed modified Stern-Volmer kinetics with the Stern-Volmer constant (Kapp) determined to be 147.1 M-1. The mechanism of sensing involves the change in the electron density of the π-conjugated phthalocyanine metallocycle core due to the strong electronic interaction with the benzenedicarboxylic acid. This work opens the way to conjugating several other chromophores and fluorophores to CNCs for colorimetric and fluorescence-based chemical sensing using paper-like films and membranes. Likewise, highly emissive ZnPc@CNC nanocomposites were shown to behave as fluorescent staining agents on the surface of TiO2 microrods. This technique can be used to render non-fluorescent micro- and nanomaterials emissive, enabling them to be imaged using fluorescence microscopy
Synthesis, Characterization of ZnS nanoparticles by Coprecipitation method us...IOSR Journals
ZnS nanoparticles are prepared by coprecipitation method using various capping agents like PVP (polyvinylpyrrolidone), PVA (polyvinylalcohol) and PEG-4000 (polyethyleneglycol). These are characterized by UV-Visible spectra, X-ray diffraction (XRD) studies, Fourier Transform Infra-red spectra (FTIR) and Transmission electron microscopy (TEM). UV-Visible absorption spectra are used to find the optical band gap and the values obtained have been found to be in the range of 3.80-4.00eV. The particle size of nanoparticles calculated from XRD pattern has been in the range of 2-4 nm. It is also observed that the particle size of nanoparticle is affected by the nature of capping agent. Photo catalytic degradation of xylenol orange (XO) by the nanoparticles shows that these act as photo catalysts under sunlight irradiation. The XO dye was degraded more than 87.24, 83.42 and 73.05% in the presence of PEG-4000, PVA and PVP capped ZnS nanoparticles in 120, 150 and 180 min. respectively. The kinetics of catalyzed by synthesized ZnS nanoparticles with XO dye follows pseudo-first order kinetics with reasonable apparent rate constants.
Growth, structural, optical, electrical and SHG studies of N-N′ allylthiourea...IJERA Editor
Potassium Dihydrogen Phosphate (KDP) crystals are one of the most popular crystals used for Non-linear
Optical (NLO) applications. Pure KDP single crystals and KDP crystals doped with N-N′ allylthiourea were
grown by the method of slow evaporation from aqueous solutions. The grown pure and doped crystals were
confirmed by X-ray single crystal and powder diffraction studies. The pure and doped crystals were
characterized by FTIR spectroscopy studies. Absorptions of these grown crystals were analyzed using UV–Vis–
NIR studies, and it was found that these crystals possess minimum absorption in the entire visible region.
Nonlinear optical studies of pure and doped crystals were carried out and it reveals that the dopants have
increased the efficiency of KDP crystals. Dielectric measurements were carried out along both the unique axis
and perpendicular directions at various temperatures ranging from 40 to 150 °C. The dielectric constant and the
dielectric loss values of N-N′ allylthiourea doped KDP crystals were lower than the pure KDP crystals. Also, it
indicates that 0.8 mole% N-N′ allylthiourea addition to KDP leads to low permittivity value dielectrics. The
results are discussed.
A novel label-free cocaine assay based on aptamer-wrapped single-walled carbo...Nanomedicine Journal (NMJ)
Objective(s):
This paper describes a selective and sensitive biosensor based on the dissolution and aggregation of aptamer wrapped single-walled carbon nanotubes. We report on the direct detection of aptamer–cocaine interactions, namely between a DNA aptamer and cocaine molecules based on near-infrared absorption at λ807.
Materials and Methods:
First a DNA aptamer recognizing cocaine was non-covalently immobilized on the surface of single walled carbon nanotubes and consequently dissolution of SWNTs was occurred. Vis-NIR absorption (A807nm) of dispersed, soluble aptamer-SWNTs hybrid, before and after incubation with cocaine was measured using a CECIL9000 spectrophotometer.
Results:
This carbon nanotube setup enabled the reliable monitoring of the interaction of cocaine with its cognate aptamer by aggregation of SWNTs in the presence of cocaine.
Disscusion:
This assay system provides a mean for the label-free, concentration-dependent, and selective detection of cocaine with an observed detection limit of 49.5 nM.
Synthesis and Characterization of Novel Nanomaterials for SERS Biomedical/Env...Necla YÜCEL
In this study, a simple green method was employed to synthesize functionalized silver nanoparticles (Ag NPs) as surface-enhanced Raman scattering (SERS) substrate for detection of dopamine (DA). In this method, polyethylene glycol (PEG) was functionalized on silver nanoparticles to prepare the uniform and controlled size of nanoparticles (NPs). The optical and structural properties of functionalized nanoparticles were characterized. The Raman spectra of the prepared PEG-Ag SERS substrate clearly indicated an enhancement in the SERS signal of dopamine. The developed functionalized SERS substrate can be potentially used as a sensitive SERS substrate for detection of various neurotransmitters for biomedical application.
Unleash Your Inner Demon with the "Let's Summon Demons" T-Shirt. Calling all fans of dark humor and edgy fashion! The "Let's Summon Demons" t-shirt is a unique way to express yourself and turn heads.
https://dribbble.com/shots/24253051-Let-s-Summon-Demons-Shirt
Expert Accessory Dwelling Unit (ADU) Drafting ServicesResDraft
Whether you’re looking to create a guest house, a rental unit, or a private retreat, our experienced team will design a space that complements your existing home and maximizes your investment. We provide personalized, comprehensive expert accessory dwelling unit (ADU)drafting solutions tailored to your needs, ensuring a seamless process from concept to completion.
Transforming Brand Perception and Boosting Profitabilityaaryangarg12
In today's digital era, the dynamics of brand perception, consumer behavior, and profitability have been profoundly reshaped by the synergy of branding, social media, and website design. This research paper investigates the transformative power of these elements in influencing how individuals perceive brands and products and how this transformation can be harnessed to drive sales and profitability for businesses.
Through an exploration of brand psychology and consumer behavior, this study sheds light on the intricate ways in which effective branding strategies, strategic social media engagement, and user-centric website design contribute to altering consumers' perceptions. We delve into the principles that underlie successful brand transformations, examining how visual identity, messaging, and storytelling can captivate and resonate with target audiences.
Methodologically, this research employs a comprehensive approach, combining qualitative and quantitative analyses. Real-world case studies illustrate the impact of branding, social media campaigns, and website redesigns on consumer perception, sales figures, and profitability. We assess the various metrics, including brand awareness, customer engagement, conversion rates, and revenue growth, to measure the effectiveness of these strategies.
The results underscore the pivotal role of cohesive branding, social media influence, and website usability in shaping positive brand perceptions, influencing consumer decisions, and ultimately bolstering sales and profitability. This paper provides actionable insights and strategic recommendations for businesses seeking to leverage branding, social media, and website design as potent tools to enhance their market position and financial success.
White wonder, Work developed by Eva TschoppMansi Shah
White Wonder by Eva Tschopp
A tale about our culture around the use of fertilizers and pesticides visiting small farms around Ahmedabad in Matar and Shilaj.
Can AI do good? at 'offtheCanvas' India HCI preludeAlan Dix
Invited talk at 'offtheCanvas' IndiaHCI prelude, 29th June 2024.
https://www.alandix.com/academic/talks/offtheCanvas-IndiaHCI2024/
The world is being changed fundamentally by AI and we are constantly faced with newspaper headlines about its harmful effects. However, there is also the potential to both ameliorate theses harms and use the new abilities of AI to transform society for the good. Can you make the difference?
1. ORIGINAL PAPER
Development of dopamine biosensor based on polyaniline/carbon
quantum dots composite
Chanida Ratlam1,2
& Sukon Phanichphant3
& Saengrawee Sriwichai1,3
Received: 9 January 2020 /Accepted: 8 May 2020
# The Polymer Society, Taipei 2020
Abstract
Low level of dopamine (DA) in human brain may lead to neurological diseases, therefore, detection of DA is necessary. This
study aims to develop 2 types of DA biosensor, i.e., electrochemical and fluorescent biosensors based on conducting polymer and
quantum dot composite. The polyaniline/carbon quantum dots (PANi/CQDs) composite was prepared and characterized by UV–
Vis absorption spectroscopy, fluorescence spectroscopy, FT–IR spectroscopy, scanning electron microscopy (SEM) and X–ray
photoelectron spectroscopy (XPS). For electrochemical biosensor, the electrospun nanofiber film of PANi/CQDs was fabricated
on fluorine doped tin oxide (FTO)–coated glass substrate. Cyclic voltammetry and amperometry were performed to study the
electrochemical activity of the PANi/CQDs film toward detection of DA in neutral solution. The obtained film showed good
sensitivity for DA sensing with sensitivity of 8.025 nA.cm−2
.μM−1
and linear range of 10–90 μM (R2
= 0.99) with detection limit
of 0.1013 μM. In addition, for fluorescent biosensor, the fluorescent intensity of PANi/CQDs in PBS solution was quenched with
increasing DA concentrations. The PANi/CQDs fluorescent biosensor presented the linear range of 0.1–100 μM (R2
= 0.94) with
detection limit of 0.0801 μM. The prepared PANi/CQDs composite can be promising candidate material for future use as DA
biosensor in real sample analysis.
Keywords Polyaniline . Carbon quantum dots . Electrospinning . Dopamine . Biosensor
Introduction
Dopamine (DA) or 3,4–dihydroxyphenyl ethylamine is an
important neurotransmitter which located in the central ner-
vous system. Low level of DA in the central nervous is cause
of several neurological diseases such as Parkinson’s disease,
Alzheimer and Schizophrenia [1, 2]. Recently, detection of
DA by various analytical techniques, e.g., high–performance
liquid chromatography [3] and gas chromatography [4] had
been reported. However, the mentioned methods have some
disadvantages including requirement of expensive equipment
and high cost. Among the various analytical techniques used
for detection of DA, the electrochemical and optical sensors
have drawn much attention because of they are simple, fast,
low cost, high sensitivity, and selective methods [5–7]. The
graphene oxide (GO) modified glassy carbon electrode (GCE)
was recently prepared electrochemical detection of DA [8].
Furthermore, the fluorescent probe based on graphitic carbon
nitride (g–C3N4) for DA detection via fluorescent quenching
was also reported [9].
Conducting polymers had received much attention for use in
biomedical and sensing applications. Among the conducting
polymers, polyaniline (PANi), polypyrrole (PPy), polythiophene
(PTh) and their derivatives such as poly(3–aminobenzoic acid)
(PABA) or poly(3,4–ethylenedioxythiophene) (PEDOT) are the
common conducting polymers for sensing applications [10–12].
PANi and its derivatives are one of the most studied conducting
polymers because of their excellent stability and good electronic
properties [11, 12], for example, the fabricated
cetyltrimethylammonium bromide (CTAB) functionalized
PANi and activated charcoal (CTAB–PANi/AC) sensor had
been reported for detection of DA and uric acid (UA) [13]. It
was found that the CTAB–PANi/AC modified electrode showed
excellent electrocatalytic activity, stability, repeatability and
* Saengrawee Sriwichai
saengrawee.s@cmu.ac.th
1
Department of Chemistry, Faculty of Science, Chiang Mai
University, Chiang Mai 50200, Thailand
2
Graduate School, Chiang Mai University, Chiang Mai 50200,
Thailand
3
Center of Excellence in Materials Science and Technology, Chiang
Mai University, Chiang Mai 50200, Thailand
https://doi.org/10.1007/s10965-020-02158-6
/ Published online: 30 June 2020
Journal of Polymer Research (2020) 27: 183
2. reproducibility to DA and UA. In addition, PANi/carbon material
composites are great deal of attention materials. Carbon materials
such as reduced graphene oxide (rGO) and multi–walled carbon
nanotubes (MWCNTs) had been used for DA detection [14, 15].
The DA biosensor based on PANi–rGO nanocomposite showed
better catalytic activity and selectivity than PANi and rGO to-
ward the oxidation of DA. Moreover, for DA biosensor based on
PANi/MWCNTs, the presence of MWCNTs could improve
electrocatalytic activity of PANi electrode for DA detection. It
could be therefore concluded that the presence of carbon mate-
rials could enhance the sensing performance. In addition, for
other applications, composites of PANi and carbon materials
such as carbon nanofiber and carbon nanotubes were applied in
anti-corrosion [16, 17] and supercapacitor applications [18].
Carbon quantum dots (CQDs) are one class of carbon materials
with nanometer sizes which have been used in biomedicines,
optronics, sensors and catalytic applications due to their lumines-
cent properties, high chemical stability, low toxicity and biocom-
patibility [6, 19–21]. Moreover, CQDs have been used for de-
tection of DA owing to their fluorescent property and also low–
cost, sensitive and selective materials. The DA biosensors based
on CQDs doped with nitrogen and phosphorous [6] and carbon
dots–gold nanoclusters hybrid (CDots–AuNCs) [21] had been
reported. The CDots acted as the energy donor while AuNCs
acted as the acceptor in fluorescence resonance energy transfer
(FRET) process. The fluorescence quenching of CQDs occurred
when DA was oxidized to o–quinone which could accept elec-
trons on AuNCs surface [21]. In addition, conducting polymer/
CQDs composites had been studied in various fields because of
their unique physicochemical properties which led to various
potential applications, i.e., biosensors, chemical sensors and
supercapacitors [22–25].
Electrospinning technique has drawn much attention be-
cause of it is a simple method for producing fibers under high
voltage. The obtained small size, high porosity and high sur-
face area fibers provide benefits in various applications such
as tissue engineering, targeted drug release, scaffolds, biosen-
sors [26, 27]. However, in case of conducting polymers espe-
cially PANi, it is difficult to produce electrospun PANi fibers
due to the rigid backbone and insufficient elastic properties of
the PANi for electrospinning process [28]. The non–
conductive polymer is therefore blended for PANi fiber for-
mation, for example, the electrospun nanofibers of PANi
blended with polyacrylonitrile (PAN) for ammonia sensor
[29] and PANi blended with polystyrene for use as cholesterol
biosensor [30]. In addition, electrospun composite nanofibers
of silk fibroin/PAN/PANi/TiO2 were prepared for dye remov-
al application [31].
This study aims to develop DA biosensors i.e., electro-
chemical and fluorescent biosensors, based on PANi/CQDs
composite. The PANi/CQDs composite was characterized
by UV–Vis absorption spectroscopy, fluorescence spectrosco-
py, FT–IR spectroscopy, scanning electron microscopy
(SEM) and X–ray photoelectron spectroscopy (XPS).
Figure 1 represents schematic diagram of the developed DA
biosensors. For building up the electrochemical biosensor, the
electrospun nanofiber of PANi/CQDs composite was depos-
ited on fluorine doped tin oxide (FTO)–coated glass substrate
which also used as working electrode. The electrode was used
for detection of DA through cyclic voltammetry and
amperometry techniques at various concentrations of DA
(1–90 μM). The electrospun nanofiber PANi/CQDs compos-
ite film showed a good sensitivity toward DA sensing. In
addition, for fluorescent biosensor, the PANi/CQDs solution
was used for detection of DA through the fluorescent
quenching at various concentrations of DA (10 nM–
100 μM). The fluorescent intensity of PANi/CQDs composite
in PBS solution was recorded before and after addition of DA.
The PANi/CQDs showed a good sensitivity and selectivity
toward DA sensing. The PANi/CQDs composite is the prom-
ising candidate material for sensitive and selective sensing
platform which can be future developed for use in real sample
analysis.
Experimental
Materials
Polyaniline (PANi; viscosity–average molecular weight
higher than 15,000, Sigma–Aldrich), poly(acrylic acid)
(PAA; viscosity–average molecular weight of 450,000,
Sigma–Aldrich), citric acid (Pierce), urea (AJAX), phosphate
buffer saline (PBS) tablet (Sigma–Aldrich), D–glucose
(Sigma–Aldrich), dopamine (Sigma–Aldrich) and ascorbic
acid (Poch) were used as received without further purification.
The carbon quantum dots (CQDs) were prepared according to
previous study [32]. Fluorine doped tin oxide (FTO)–coated
glass substrate (Sigma–Aldrich) was cleaned before use as
working electrode.
Fabrication of electrospun PANi/CQDs composite fiber
film
The PANi/CQDs solution was prepared by dissolving PANi
(3%w/v), CQDs (1%w/v) and PAA (5% w/v) in mixed solvent
of DI water and chloroform (ratio of 7:3). The solution was
sonicated for 1 h and centrifuged at 4000 rpm for 1 h. The
obtained solution was freshly stirred for 1 h before use for
fabrication of electrospun PANi/CQDs fiber film. The opti-
mized electrospinning condition was the voltage of 15 kV,
feeding rate of 0.4 mL/h, distance between the syringe and
the collector (i.e., FTO electrode) of 15 cm and period time of
1 h. The obtained PANi/CQDs composite fiber film was fur-
ther used for electrochemical detection of DA.
183 Page 2 of 12 J Polym Res (2020) 27: 183
3. Characterization of PANi/CQDs composite
The various characterization techniques were employed to
characterize PANi/CQDs composite prior to use for DA bio-
sensor. Particle size analyzer (HORIBA SZ–100) was
employed to measure particle size of CQDs based on dynamic
light scattering (DLS) measurement. In addition, particle size
and surface morphology of CQDs were studied by transmis-
sion electron microscopy (TEM; JEOL JEM–2010). The X–
ray diffraction (XRD; Rigaku Smartlab) analysis was also
performed to confirm the formation of CQDs. The optical
properties were studied using UV–Vis absorption spectrosco-
py (UV–1800 Shimadzu) and fluorescence spectroscopy
(Synergy™ H4). The structural confirmation was investigated
using FT–IR spectroscopy (Thermo Nicolet 6700
Thermoscientific) and X–ray photoelectron spectroscopy
(XPS; AXIS ultra DLD spectrometer). The surface morphol-
ogy of the electrospun fiber films was observed using a field
emission–scanning electron microscopy (FE–SEM; JEOL
JSM–6335F).
Electrochemical detection of dopamine
The electrospun PANi/CQDs composite fiber film fabricated
on FTO working electrode was connected to the 3–electrode
electrochemical cell with a computer control potentiostat
(eDAQ: ED410 e–corder 410). The reference electrode was
Ag/AgCl (in 3 M KCl) and counter electrode was platinum
wire. The sensing experiment was performed by adding vari-
ous concentrations of DA (10–90 μM) into PBS solution and
monitored using cyclic voltammetry with potential range of
−0.2 V to 0.8 V at scan rate of 20 mV/s. In addition, the
amperometric responses of the DA biosensor based on
electrospun PANi/CQDs composite fiber were obtained by
successive addition of various concentrations of DA (1–
90 μM) into PBS solution at constant applied potentials of
0.38 V. Cyclic voltammetry at various scan rates (20, 40,
60, 80, 100, 200, 300 and 400 mV/s) was performed using
90 μM DA in PBS solution under applied potential of −0.2 V
to 0.8 V. For selectivity experiment, ascorbic acid and glucose
were further employed in both cyclic voltammetry and
amperometry.
Fluorescence detection of dopamine
The PANi (0.10%w/v) and CQDs (0.020%w/v) composite
was prepared in PBS solution for detection of DA (10 nM–
100 μM). The fluorescence spectra were immediately record-
ed with an excitation wavelength at 360 nm after addition of
DA.
Results and discussion
Characterization of PANi/CQDs composite
TEM image of the synthesized CQDs dispersed in water is
shown in Fig. 2a with average diameter of 11.8 ± 2.9 nm. The
DLS measurement indicated that average diameter of CQDs
was about 9–10 nm (result is not shown). The XRD pattern of
the obtained CQDs is shown in Fig. 2b. The CQDs exhibited a
broad peak at an angle of 2θ = 19.2° which indicated
Fig. 1 Schematic diagram
representing the developed
electrochemical sensor and
fluorescent sensor
Page 3 of 12 183
J Polym Res (2020) 27: 183
4. amorphous carbon in nature [33, 34]. The optical properties of
the CQDs and PANi/CQDs were examined by UV–Vis ab-
sorption spectroscopy and fluorescence spectroscopy. The ab-
sorption spectra of CQDs, PANi and PANi/CQDs in DI water
are shown in Fig. 3. The PANi showed absorption peak at
260 nm which corresponded to π–π* transition from the ben-
zene ring [35]. The CQDs represented absorption peaks at
291 nm and 343 nm which related to π–π* and n–π* transi-
tions from aromatic C=C bond and C=O bond, respectively
[36, 37]. The UV–Vis spectrum of PANi/CQDs composite
was mainly similar to PANi and CQDs which showing peaks
at 285 nm and 354 nm due to the π–π * transition in the
benzenoid ring and n–π* transition of C=O bond, respectively
[35, 37]. The absorption peak of n–π* transition of C=O bond
in PANi/CQDs composite was red shifted due to the interac-
tion of CQDs and polymer (PANi) matrix [32].
The fluorescence intensity is dependent on the excitation
wavelength [32]. The CQDs and PANi/CQDs solutions were
excited in the range of 340–380 nm which showed the emis-
sion fluorescence peaks in the range of 405–445 nm. The
maximum emission intensity was clearly observed at excita-
tion wavelength of 360 nm with an emission peak of 426 nm
as shown in Fig. 4. This excitation wavelength was selected
for performing fluorescent DA biosensor afterward. The
fluorescence intensities of CQDs were obviously high at all
excitation wavelengths. Furthermore, the fluorescence inten-
sities of PANi/CQDs composite were obviously observed to
be higher than that of the PANi which implied to the incorpo-
ration of CQDs into PANi. This circumstance could be ex-
plained as the nitrogen dopant in CQDs structure played im-
portant role to exhibit photoluminescence properties which
could enhance the emission of the CQDs by increasing the
fermi level and electrons in the conduction band. Moreover,
the direct recombination of excited electrons from the n–π*
transition of C=O and C=N groups can also lead to the emis-
sion of CQDs [32]. The blue shifting emission was also ob-
served with increasing excitation wavelength. This shifting
might be the result of the size distribution of the prepared
CQDs which led to the different energy trapping upon excita-
tion wavelength [38, 39].
FT–IR spectroscopy was utilized to analyze the functional
groups of PAA, PANi, CQDs and PANi/CQDs films. The
FT–IR spectra of PAA, PANi, CQDs and PANi/CQDs films
are shown in Fig. 5. The PAA represented the peaks at 1697
and 1450 cm−1
which were assigned to the stretching vibration
of COOH and bending vibration of COO, respectively [32].
The peaks of PANi at 2800–2900, 1556, 1453 and 1299 cm−1
Fig. 2 a TEM image and b XRD
pattern of CQDs
Fig. 4 Fluorescence spectra of PANi, CQDs and PANi/CQDs in PBS
solution at excitation wavelengths of 340–380 nm (EX340–EX380).
Inset shows the expanded fluorescence spectra of PANi
Fig. 3 UV–Vis absorption spectra of CQDs, PANi and PANi/CQDs in
DI water
183 Page 4 of 12 J Polym Res (2020) 27: 183
5. corresponded to the to –CH2 and –CH, C=C stretching of
quinoid rings, C=C stretching vibration of benzenoid rings
and C–N stretching of benzenoid unit, respectively [23, 40,
41]. The broad band at 3100–3500 cm−1
attributed to O–H
and N–H group in CQDs whereas the peaks at 1077 and
1655 cm−1
were assigned to C–N stretching and C=O
stretching of carboxylic group on the surface, respectively
[23, 36]. The FT–IR spectrum of PANi/CQDs composite film
showed the broad band of O–H, N–H and CH2 stretching at
around 3000 cm−1
. The broad peak of C=O stretching in CQDs
and COOH of PAA was represented about 1695 cm−1
whereas
the peak of C–N stretching of PANi and CQDs was shown at
1032 cm−1
. However, the presence of both PANi and CQDs in
the composite fiber film was not clearly observed. The another
characterization technique, i.e., XPS was then employed to
confirm the presence of PANi/CQD composite.
XPS measurement was further performed to study the chem-
ical composition of the films. The XPS spectra of the PANi,
PAA, CQDs and PANi/CQDs films are presented in Fig. 6.
The survey spectra in Fig. 6a represented the peaks of C1s,
N1s and O1s at ~285 eV, 400 eV and 532 eV for PANi,
CQDs, and PANi/CQDs film. In case of PAA, only C1s and
O1s peaks were observed. For PANi, the presence of oxygen
was probably associated with contamination produced during
the preparing process. This contamination could be also caused
by the environmental contact and water adsorption upon storage
[42, 43]. The high resolution C1s and N1s spectra of CQDs film
are shown in Fig. 6b. The C1s peaks at binding energy of
284.9 eV, 285.6 eV, 287.1 eV and 289.0 eV were contributed
to C=C or C–C, C–OH or C–O–C, C–O or C–N and O–C=O,
respectively. For N1s peaks, the C–N and N–H or C=N func-
tional groups were shown at 400.2 eV and 402.1 eV, respectively
[37, 42, 44, 45]. The high resolution C1s and N1s spectra of the
PANi film were presented in Fig. 6c. The XPS spectrum for C1s
indicated the presence of benzenoid structure in PANi, i.e., C–N
or C=N at 284.9 eV and C–N+
or C=N+
at 285.8 eV. The peak of
cationic specie of nitrogen (=NH+
–) was also observed at
399.6 eV. The nitrogen contribution at 401.7 eV can be assigned
to positively charged nitrogen (N+
) which representing the for-
mation of the protonated nitrogen specie [42, 45]. The high res-
olution spectra of the PANi/CQDs film are presented in Fig. 6d.
The C1s peaks at 284.2 eV, 285.2 eV, 286.9 eV and 289.0 eV
were assigned to C–C or C=C, C–N or C=N, C–O or C–N, C–
N+
or C=N+
, C–OH or C–O=C, C–O and C=O, respectively, of
PAA, PANi and CQDs. The N1s peak at 400.0 eV and 401.8 eV
were assigned to C–N and N–H or C=N or N+
from PANi and
Fig. 6 XPS a survey spectra and high resolution spectra of b CQDs, c
PANi, d PANi/CQDs and e PAA films
Fig. 5 FT–IR spectra of PAA, PANi, CQDs and PANi/CQDs films
Page 5 of 12 183
J Polym Res (2020) 27: 183
6. CQDs. Moreover, PAA was blended with PANi/CQDs for
manufacturing electrospun fiber in this study. The C1s high res-
olution spectrum of PAA is shown in Fig. 6e. The peaks at
284.7 eV, 285.2 eV, 286.5 eV and 289.0 eV were assigned to
C–C, C–O, C=O and O–C=O species, respectively [44, 45].
From XPS survey spectra, the atomic percentage of nitrogen in
CQDs, PANi and PANi/CQDs films were calculated to be
8.14%, 2.08% and 2.49%, respectively. The higher percentage
of nitrogen in PANi/CQDs film than that of the PANi film indi-
cated the presence of CQDs in the electrospun PANi/CQDs fiber
film [32].
It is difficult to obtain the PANi or other conducting poly-
mer fibers by electrospinning method due to their rigid back-
bones. In addition, their high degree of aromaticity lead the
elastic properties of the solution insufficient for
electrospinning [27, 29]. Therefore, PAA as a non–
conductive polymer was selected for blending with PANi/
CQDs for formation of electrospun fiber in this work.
Surface morphology of the obtained PANi and PANi/CQDs
electrospun fibers was examined by FE–SEM as shown in
Fig. 7. It can be seen that the surfaces of PANi and PANi/
CQDs fibers were uniform and smooth. The average diame-
ters of PANi and PANi/CQDs fibers were calculated to be
120 nm and 320 nm, respectively. The increasing of PANi/
CQDs fiber size was due to the addition of CQDs in PANi to
form PANi/CQDs composite [46].
Electrochemical detection of dopamine
In this study, the electrospun PANi/CQDs fiber was employed
for fabrication of an electrochemical DA biosensor. The
electrospinning is convenient method for producing fiber un-
der a high applied voltage between a metal needle and a col-
lector. The polymer solution is jetted from the metal needle to
deposit on FTO electrode as a collector [27]. The employed
electrospinning condition was optimized prior to fabricate the
DA biosensor. Cyclic voltammetry was performed to study
the electrochemical activity of PANi and PANi/CQDs toward
Fig. 7 FE–SEM images of a
PANi and b PANi/CQDs
electrospun fibers
Fig. 8 Cyclic voltammograms of
a PANi/CQDs and b PANi to-
ward detection of 10–90 μM DA
in PBS solution c cyclic voltam-
mograms of PANi and PANi/
CQDs for detection of 90 μM DA
183 Page 6 of 12 J Polym Res (2020) 27: 183
7. various concentrations of DA (10–90 μM) at scan rate of
20 mV/s and potential range of −0.2 V to 0.8 V in neutral
PBS solution. The cyclic voltammograms of PANi and
PANi/CQDs for detection of DA (10–90 μM) are shown in
Fig. 8a and b, respectively. The current responses of both
electrodes increased with increasing concentrations of DA.
For comparison, the cyclic votammograms of PANi and
PANi/CQDs toward detection of 90 μM DA are shown in
Fig. 8c. The current response of PANi/CQDs upon detection
of DA was obviously higher than that of PANi due to the
abundant surface functional groups, i.e., hydroxyl, carboxyl
and amine groups, of CQDs could interact with the DA mol-
ecule through π–π stacking and hydrogen bonding interac-
tions [6, 19].
As seen in Fig. 8, the anodic peaks of cyclic voltammo-
grams for DA sensing were observed at 0.38 V. The constant
applied potential for the amperometric experiment at 0.38 V
was therefore selected. The amperometric responses of PANi
and PANi/CQDs in PBS are shown in Fig. 9. The current
responses of PANi and PANi/CQDs were increased upon suc-
cessive addition of DA (1–90 μM) due to the oxidation of DA
on PANi and PANi/CQDs surfaces was increased. This situ-
ation could be explained as the increasing of π–π interaction
between phenyl structure of DA and benzenoid structure of
PANi [47]. Moreover, the hydroxyl, carboxyl and amine
groups of CQDs could interact with DA through π–π stacking
and hydrogen bonding interactions [6].
The current response of PANi/CQDs was slightly higher
than that of PANi. The sensitivity of electrochemical DA bio-
sensor was calculated from slope of amperometric curve (μA)
and concentration of DA as shown in the inset of Fig. 9 [48].
The sensitivities of PANi and PANi/CQDs were calculated to
be 7.587 and 8.025 nA.cm−2
.μM−1
, respectively, with limit of
Fig. 9 Amperometric responses of PANi and PANi/CQDs film with
successive addition of 1–90 μM DA to PBS solution at 0.38 V
Fig. 10 Cyclic voltammograms a PANi/CQDs b PANi c CQDs performed in 90 μM DA in PBS solution at different scan rates and d linear relationship
between ip vs. ν1/2
Page 7 of 12 183
J Polym Res (2020) 27: 183
8. detection (LOD) of 0.2089 μM for PANi and 0.1013 μM for
PANi/CQDs and linear range of 10–90 μM (R2
= 0.99). The
LOD was calculated from the slope of the above mentioned
curves and the standard deviation of amperometric responses
of PBS blank solution. The sensitivity and LOD were ob-
served to be enhanced for PANi/CQDs electrode. The results
of cyclic voltammetry and amperometry demonstrated that the
CQDs could improve the electrocatalytic activity of PANi
towards detection of DA. The cyclic voltammograms for de-
tection of 90 μM DA in PBS solution under applied potential
range of −0.2 V to 0.8 V at different scan rates using different
electrodes with linear relationship plots of anodic current peak
height (ipa) and cathodic current peak height (ipc) versus
square root of the scan rate (ν1/2
) are shown in Fig. 10. The
linear relationship confirms the diffusion control at the elec-
trode surface. The electrochemical surface area (A) of CQD,
PANi and PANi/CQDs electrodes was calculated from
Randles-Sevcik equation at the angular coefficient of the lin-
ear plots of current peak height (ip) versus v1/2
[49]. Table 1
represents the calculated electrochemical surface area of both
anodic (Aanodic) and cathodic (Acathodic) scans of different
electrodes.
Furthermore, the selectivity experiment of PANi/CQDs
electrode was performed by amperometric method and cyclic
voltammetry toward common interferences, i.e., glucose (Glc)
and ascorbic acid (AA). The amperometric response at 0.38 V
and cyclic voltammogram of PANi/CQDs with successive
addition of DA, Glc and AA into PBS solution are shown in
Fig. 11. The current responses of PANi/CQDs electrode to-
wards detection of DA were obviously higher than that of the
responses of the interferences. The AA could perform the
electrochemical oxidation toward detection of DA at 0.2–
0.4 V, however, AA could form negatively charge in neutral
PBS solution which led to electrostatic repulsion between the
negatively charged oxygen functional groups (COO−
) of PAA
and CQDs at pH 7 [50]. For detection of glucose, the PANi/
CQDs could not respond toward addition of Glc due to the
absence of glucose oxidase catalyst for glucose detection [51].
The results implied that the developed electrochemical DA
biosensor based on electrospun PANi/CQDs composite fiber
film presenting high selectivity.
Fluorescence detection of dopamine
It is well–known that CQDs exhibit fluorescence properties
[19, 22]. We therefore employed PANi/CQDs composite for
detection of DA in this study. As we observed in Fig. 4, the
fluorescence intensities of PANi were very low with noise
signal therefore the PANi would not be chosen for detection
of DA. The fluorescent DA biosensor based on PANi/CQDs
composite was used for detection of DA (10 nM–100 μM) in
neutral PBS solution. Figure 12 shows fluorescence spectra of
PANi/CQDs composite upon detection of DA and interfer-
ences at excitation wavelength of 360 nm. The maximum
emission peaks were located at about 442 nm. The fluores-
cence quenching was observed after adding the substances
into PBS solution. As shown in Fig. 12a, the fluorescent in-
tensity of the PANi/CQDs decreased gradually with the in-
creasing of DA concentrations (10 nM–100 μM). The PANi/
CQDs fluorescent biosensor presented the the linear range of
0.1–100 μM (R2
= 0.94) with detection limit of 0.0801 μM.
The quenching mechanism of CQDs could be explained as the
oxidized DA or dopamine–quinone could quench the fluores-
cence of CQDs. As the result, the higher concentration of DA
therefore led to more quenching effect of CQDs. In addition,
hydroxyl, carboxyl and amine groups of CQDs could interact
with DA through π–π stacking and hydrogen bonding inter-
actions [6]. PANi could also interact with DA through π–π
interaction between phenyl structures of DA and PANi [47].
These interactions led to enhancement the quenching effect of
CQDs in PANi/CQDs composite toward detection of DA. The
fluorescence spectra upon detection of DA using CQDs and
PANi/CQDs are shown in Fig. 12b. Upon sensing with
100 nM DA, the PANi/CQDs composite showed more fluo-
rescence quenching than CQDs. The selectivity of the PANi/
CQDs was investigated by sensing with Glc and AA as
Table 1 Electroactive areas (A, in mm2
) of different electrodes,
calculated from the CV scans performed in 90 μM DA in PBS solution
CQDs PANi PANi/
CQDs
Aanodic 0.962 1.12 1.127
Acathodic 0.652 0.714 0.848
Fig. 11 Electrochemical
responses of PANi/CQDs bio-
sensor a amperometric response
with successive addition of DA,
AA and Glc at 0.38 V and b cy-
clic voltammograms toward de-
tection of 90 μM of DA, AA and
Glc in PBS solution
183 Page 8 of 12 J Polym Res (2020) 27: 183
9. represented in Fig. 12c. The fluorescence quenching was ob-
viously seen after adding DA whereas the quenching could be
slightly observed upon adding both Glc and AA. These results
implied that the PANi/CQDs composite represented the great
potential and ability for DA detection by fluorescence
quenching.
Table 2 shows the comparison of some previous CQDs–
based works for detection of DA. It can be concluded from the
Fig. 12 Fluorescence quenching of PANi/CQDs with addition of a various concentrations of DA, b fluorescence quenching of PANi/CQDs and CQDs
with addition of 100 nM DA and c 10 μM of DA, AA and Glc
Table 2 Summary of fluorescent
and electrochemical biosensors
for detection of DA
Types of sensor Linear range
(μM)
Limit of detection
(μM)
Sensitivity Ref.
Fluorescent biosensor
N, P doped CQDs 10–500 0.021 – [6]
CDs/TYR 0.206–131.8 0.06 – [7]
CDots–AuNCs 0.005–0.180 0.0029 – [21]
CDs/CuNCs nanohybrids 0.1–100 0.032 – [52]
N–CQDs 0.1–200 0.05 – [53]
PANi/CQDs 0.1–100 0.0801 – This
work
Electrochemical biosensor
MoS2–PANi/rGO/GCE 5.0–500 0.70 – [54]
GCE modified with
CQDs
0.19–11.81 2.7 9.3 (mA μM−1
) [55]
AuNPs@PANi/GSPE 1–100 0.86 – [56]
Fe–Meso–PANi 10–300 9.8 0.2693(μA/μM) [57]
GO–PANi/GCE 1–14 0.5 – [58]
PANi/CQDs 10–90 0.1013 8.025
(nA.cm−2
.μM−1
)
This
work
Abbreviation: N, P doped CQDs nitrogen and phosphorous doped carbon quantum dots, CDs/TYR carbon
dots/tyrosinase, CDots–AuNCs carbon dots–gold nanoclusters hybrid, CDs carbon dots, CuNCs copper
nanoclusters, N–CQDs Nitrogen-doped carbon quantum dots, rGO reduced graphene oxide, MoS2 molybdenum
disulfide, GCE glassy carbon electrodes, GSPEs graphite screen-printed electrodes, AuNPs gold nanoparticles,
Fe–Meso–PANi Fe ion-exchanged mesoporous polyaniline, GO graphene oxide
Page 9 of 12 183
J Polym Res (2020) 27: 183
10. results of electrochemical and fluorescence DA biosensors
based on PANi/CQDs composite that the developed DA bio-
sensors presented the ability for detection of low concentra-
tion of DA with good sensitivity and high selectivity.
Detection of low concentration of DA is importance because
low level of DA can be used to indicate the neurological
diseases [59]. Therefore, development of DA biosensor is
necessary for detection of DA at low concentration.
Conclusions
The electrochemical and fluorescent DA biosensors based on
PANi/CQDs composite were successfully developed for de-
tection of low concentration of DA. The PANi/CQDs com-
posite was prepared and characterized prior to use for building
up the DA biosensors. For electrochemical biosensor, the
electrospun fiber film of PANi/CQDs composite was fabricat-
ed on FTO substrate which also used as working electrode for
electrochemical detection of DA. The electrochemical detec-
tion of DA was performed using cyclic voltammetry and
amperometry at various concentrations of DA (1–100 μM).
The obtained electrospun PANi/CQDs fiber film exhibited
good selectivity and high sensitivity toward DA sensing. For
fluorescent biosensor, the PANi/CQDs solution was used for
detection of various concentrations of DA (10 nM–100 μM)
through fluorescent quenching. The PANi/CQDs composite
showed a good sensitivity toward DA sensing. The PANi/
CQDs composite is the promising candidate material for sen-
sitive and selective detection of DA which becomes a sensing
platform for future use in real sample analysis.
Acknowledgments The work was supported by the Center of Excellence
in Materials Science and Technology, Chiang Mai University. The au-
thors would like to acknowledge Faculty of Medicine, Chiang Mai
University for photoluminescence measurement.
References
1. Vulto AG, Westenberg HG, Meijer LB, Versteeg DH (1986) The
Dopamine Metabolite 3-Methoxytyramine Is Not a Suitable
Indicator of Dopamine Release in the Rat Brain. J Neurochem 45:
1387–1393
2. Diab N, Morales DM, Andronescu C, Masoud M, Schuhmann W
(2019) A sensitive and selective graphene/cobalt tetrasulfonated
phthalocyanine sensor for detection of dopamine. Sensors
Actuators B Chem 285:17–23
3. Carrera V, Sabater E, Vilanova E, Sogorb MA (2007) A simple and
rapid HPLC–MS method for the simultaneous determination of
epinephrine, norepinephrine, dopamine and 5-hydroxytryptamine:
Application to the secretion of bovine chromaffin cell cultures. J
Chromatogr B 847:88–94
4. Naccarato A, Gionfriddo E, Sindona G, Tagarelli A (2014)
Development of a simple and rapid solid phase microextraction-
gas chromatography–triple quadrupole mass spectrometry method
for the analysis of dopamine, serotonin and norepinephrine in hu-
man urine. Anal Chim Acta 810:17–24
5. Venton BJ, Wightman RM (2003) Psychoanalytical
Electrochemistry: Dopamine and Behavior. Anal Chem 1:414–
41A
6. Tammina SK, Yang D, Koppala S, Chengsheng C, Yang Y (2019)
Highly photoluminescent N, P doped carbon quantum dots as a
fluorescent sensor for the detection of dopamine and temperature.
J Photochem Photobiol B Biol 194:61–70
7. Li H, Liu J, Yang M, Kong W, Huang H, Liu Y (2014) Highly
sensitive, stable, and precise detection of dopamine with carbon
dots/tyrosinase hybrid as fluorescent probe. RSC Adv 4:46437–
46443
8. Gao F, Cai X, Wang X, Gao C, Liu S, Gao F, Wang Q (2013)
Highly sensitive and selective detection of dopamine in the pres-
ence of ascorbic acid at graphene oxide modified electrode. Sensors
Actuators B Chem 186:380–387
9. Lv J, Feng S, Ding Y, Chen C, Zhang Y, Lei W, Hao Q, Chen SM
(2019) A high-performance fluorescent probe for dopamine detec-
tion based on g-C3N4 nanofibers. Spectrochim Acta A 212:300–
307
10. Megha R, Ali FA, Ravikiran YT, Ramana C, Kumar ABVK,
Mishra DK, Vijayakumari SC, Kim D (2018) Conducting polymer
nanocomposite based temperature sensors: A review. Inorg Chem
Commun 98:11–28
11. Mathiyarasu J, Senthilkumar S, Phani KLN, Yegnaraman V (2005)
Selective detection of dopamine using a functionalised polyaniline
composite electrode. J Appl Electrochem 53:513–519
12. Zuo F, Jin L, Fu X, ZhangH YR, Chen S (2017) An
electrochemiluminescent sensor for dopamine detection based
ona dual-molecule recognition strategy and polyaniline quenching.
Sensors Actuators B Chem 244:282–289
13. Govindasamy M, Chen SM, Mani V, Sathiyan A, Merlin JP, Al-
Hemaid FMA, Ali MA (2016) Simultaneous determination of do-
pamine and uric acid in presence of high concentration of ascorbic
acid using cetyltrimethylammonium bromide–polyaniline/activated
charcoal composite. RSC Adv 6:100605–100613
14. Xie LQ, Zhang YH, Gao F, Wu QA, Xu PY, Wang SS, Gao NN,
Wang QX (2017) A highly sensitive dopamine sensor based on a
polyaniline/reduced graphene oxide/Nafion nanocomposite. Chin
Chem Lett 28:41–48
15. Sabzi RE, Rezapour K, Samadi N (2010) Polyaniline-multi-wall-
carbon nanotube nanocomposites as a dopamine sensor. J Serb
Chem Soc 75:537–549
16. Yuan R, Liu H, Yu P, Wang H, Liu J (2018) Enhancement of
adhesion, mechanical strength and anti-corrosion by multilayer
superhydrophobic coating embedded electroactive PANI/CNF
nanocomposite. J Polym Res 25(7):151
17. Jafari Y, Ghoreishi SM, Shabani-Nooshabadi M (2016) Preparation
of covalently bonded polyaniline nanofibers/carbon nanotubes
supercapacitor electrode materials using interfacial polymerization
approach. J Polym Res 23:91
18. Xiong S, Zhang X, Wang R, Lu Y, Li H, Liu J, Li S, Qui Z, Wu B,
Chu J, Zhang R, Gong M, Chen Z, Wang X (2019) Preparation of
covalently bonded polyaniline nanofibers/carbon nanotubes
supercapacitor electrode materials using interfacial polymerization
approach. J Polym Res 26(4):90
19. Hu A, Wang Y (2014) Carbon quantum dots: synthesis, properties
and applications. J Mater Chem C 2:6921–6939
20. Yang S, Sun X, Wang Z, Wang X, Guo G, Pu Q (2017) One-step
facile green synthesis of a highly fluorescent molecule through a
way towards carbon dots and detection of dopamine based on in-
situ formation of silver nanoparticles. Sensors Actuators B Chem
253:752–758
21. He YS, Pan CG, Cao HX, Yue MZ, Wang L, Liang GX (2018)
Highly sensitive and selective dual-emission ratiometric
183 Page 10 of 12 J Polym Res (2020) 27: 183
11. fluorescencedetection of dopamine based on carbon dots-gold
nanoclusters hybrid. Sensors Actuators B Chem 256:371–377
22. Chung TS, Zhao DL (2018) Applications of Carbon Quantum Dots
(CQDs) in Membrane Technologies: A Review. Water Res 147:
43–49
23. Gao F, Du X, Hao X, Li S, An X, Liu M, Han N, Wang T, Guan G
(2017) An electrochemically-switched BPEI-CQD/PPy/PSS mem-
brane for selective separation of dilute copper ions from wastewa-
ter. Chem Eng J 328:293–303
24. Uthirakumar P, Devendiran M, Yun JH, Kim GC, Kalaiarasan S,
Lee IH (2018) Role of carbon quantum dots and film thickness on
enhanced UV shielding capability of flexible polymer film contain-
ing carbon quantum dots/N-doped ZnO nanoparticles. Opt Mater
84:771–777
25. Xie Y, Zhao Z (2017) Enhanced electrochemical performance of
carbon quantum dots-polyaniline hybrid. J Power Sources 337:54–
64
26. Kamble P, Sadarani B, Majumdar A, Bhullar S (2017) Nanofiber
based drug delivery systems for skin: A promising therapeutic ap-
proach. J Drug Deliv Sci Technol 41:124–133
27. Lee JKY, Chen N, Peng S, Li L, Tian L, Thakor N, Ramakrishna S
(2017) Polymer-based composites by electrospinning: Preparation
& functionalization with nanocarbons. Prog Polym Sci 41:40–84
28. Bhardwaj N, Kundu SC (2010) Electrospinning: A fascinating fiber
fabrication technique. Biotechnol Adv 28:325–347
29. Anwane RS, Kondawar SB, Late DJ (2018) Bessel’s polynomial
fitting for electrospun polyacrylonitrile/Polyaniline blend nanofi-
bers based ammonia sensor. Mater Lett 211:70–73
30. Shin YJ, Kameoka QJ (2018) Amperometric cholesterol biosensor
using layer-by-layer adsorption technique onto electrospun
polyaniline nanofibers. J Ind Eng Chem 18:193–197
31. Aziz S, Sabzi M, Fattahi A, Arkan E (2017) Electrospun silk
fibroin/PAN double-layer nanofibrous membranes containing
polyaniline/TiO2 nanoparticles for anionic dye removal. J Polym
Res 24(9):140
32. Alam AM, Liu Y, Park M, Park SJ, Kim HY (2015) Preparation
and characterization of optically transparent and photoluminescent
electrospun nanofiber composed of carbon quantum dots and poly-
acrylonitrile blend with polyacrylic acid. Polymer 59:35–41
33. Luo K, Jiang X (2019) Fluorescent Carbon Quantum Dots with
Fe(III/II) Irons as Bridge for the Detection of Ascorbic Acid and
H2O2. J Fluoresc 29(3):769–777
34. Wu F, Su H, Wang K, Wong WK, Zhu X (2017) Facile synthesis of
N-rich carbon quantum dots from porphyrins as efficient probes for
bioimaging and biosensing in living cells. J Nanomed 12:7375–
7391
35. Huang WS, MacDiarmid AG (1993) Optical properties of
polyaniline. Polymer 34:1833–1845
36. Wang L, Liu X, Lu Q, Wang X, Qu S (2012) A Biocompatible
Fluorescent Ink Based on Water-Soluble Luminescent Carbon
Nanodots. Angew Chem Int Ed 51:12215–12218
37. Tang J, Zhang J, Zhang Y, Xiao Y, Shi Y, Chen Y, Ding L, Xu W
(2019) Influence of Group Modification at the Edges of Carbon
Quantum Dots on Fluorescent Emission. Nanoscale Res Lett 14:
241
38. Wang F, Pang S, Wang L, Li Q, Kreiter M, Liu CY (2010) One-
Step Synthesis of Highly Luminescent Carbon Dots in
Noncoordinating Solvents. Chem Mater 22:4528–4530
39. Shi Y, Pan Y, Zhang H, Zhang Z, Li MJ, Yi C (2014) A dual-mode
nanosensor based on carbon quantum dots and gold nanoparticles
for discriminative detection of glutathione in human plasma.
Biosens Bioelectron 56:39–45
40. Bera S, Kundu S, Khan H, Jana S (2018) Polyaniline coated
graphene hybridized SnO2 nanocomposite: Low temperature solu-
tion synthesis, structural property and room temperature ammonia
gas sensing. J Alloys Compd 744:260–270
41. Zhang D, Wu Z, Li P, Zong X, Dong G, Zhang Y (2018) Facile
fabrication of polyaniline/multi-walled carbon nanotubes/
molybdenum disulfide ternary nanocomposite and its high-
performance ammonia-sensing at room temperature. Sensors
Actuators B Chem 258:895–905
42. Golczak S, Kanciurzewska A, Fahlman M, Langer K, Langer JJ
(2008) Comparative XPS surface study of polyaniline thin films.
Solid State Ionics 179:2234–2239
43. Parra ER, Arango PJA, Palacio VJB (2010) XPS structure analysis
of TiN/TiC bilayers produced by pulsed vacuum arc discharge.
Dyna 163:64–74
44. Li Q, Mao D, Li D, Chen Y, Chen X, Xu X (2018) A versatile
porous 3D polyurethane/polyacrylic acid (PU-PAA) membrane for
one-step multiple contaminants water purification. J Membr Sci
563:191–198
45. Kim HB, Park JA, Kang JK, Lee SC (2017) Electrospun poly(acryl-
ic acid)/poly(vinyl alcohol) nanofibrous adsorbents for Cu(II) re-
moval from industrial plating wastewater. RSC Adv 7:18075–
18084
46. Zhang P, Zhao X, Ji Y, Ouyang Z, Wen X, Li J, Su Z, Wei G (2015)
Electrospinning graphene quantum dots into a nanofibrous mem-
brane for dual-purpose fluorescent and electrochemical biosensors.
J Mater Chem B 3:2487–2496
47. Yang L, Liu S, Zhang Q, Li F (2012) Simultaneous electrochemical
determination of dopamine and ascorbic acid using
AuNPs@polyaniline core–shell nanocomposites modified elec-
trode. Talanta 89:136–141
48. Chen LC, Tseng KS, Ho KC (2006) General Kinetic Model for
Amperometric Sensors Based on Prussian Blue Mediator and Its
Analogs: Application to Cysteine Detection. Electroanalysis 18:
1313–1321
49. Elgrishi N, Rountree KJ, McCarthy BD, Rountree ES, Eisenhart
TT, Dempsey JL (2018) A Practical Beginner’s Guide to Cyclic
Voltammetry. J Chem Educ 95:197–206
50. RahmanMM LJJ (2019) Electrochemical Dopamine Sensors Based
on Graphene. J Electrochem Sci Technol 10(2):185–195
51. Maity D, Minitha CR, Kumar RTR (2019) Glucose oxidase
immobilized amine terminated multiwall carbon nanotubes/
reduced graphene oxide/polyaniline/gold nanoparticles modified
screen-printed carbon electrode for highly sensitive amperometric
glucose detection. Mater Sci Eng C Mater Biol Appl 105:110075
52. He W, Gui R, Jin H, Wang B, Bu X, Fu Y (2018) Ratiometric
fluorescence and visual imaging detection of dopamine based on
carbon dots/copper nanoclusters dual-emitting nanohybrids.
Talanta 178:109–115
53. Zhao C, Jiao Y, Hua J, Yang J, Yang Y (2018) Hydrothermal
Synthesis of Nitrogen-Doped Carbon Quantum Dots as
Fluorescent Probes for the Detection of Dopamine. J Fluoresc
28(1):269–276
54. Li S, Ma Y, Liu Y, Xin G, Wang M, Zhang Z, Liu Z (2019)
Electrochemical sensor based on a three dimensional nanostruc-
tured MoS2nanosphere-PANI/reduced graphene oxide composite
for simultaneous detection of ascorbic acid, dopamine, and uric
acid. RSC Adv 9(6):2997–3003
55. Algarra M, González-Calabuig A, Radotić K, Mutavdzic D, Ania
CO, Lázaro-Martínez JM, Jiménez-Jiméneza J, Rodríguez-
Castellón E, Del Valle M (2018) Enhanced electrochemical re-
sponse of carbon quantum dot modified electrodes. Talanta 178:
679–685
56. Selvolini G, Lazzarini C, Marrazza G (2019) Electrochemical
Nanocomposite Single-Use Sensor for Dopamine Detection.
Sensors 19(14):3097
57. Prathap MA, Srivastava R (2013) Tailoring properties of
polyaniline for simultaneous determination of a quaternary mixture
of ascorbic acid, dopamine, uric acid, and tryptophan. Sensors
Actuators B Chem 177:239–250
Page 11 of 12 183
J Polym Res (2020) 27: 183
12. 58. Bao Y, Song J, Mao Y, Han D, Yang F, Niu L, Ivaska A (2011)
Graphene Oxide-Templated Polyaniline Microsheets toward
Simultaneous Electrochemical Determination of AA/DA/UA.
Electroanalysis 23(4):878–884
59. Demirkan B, Bozkurt S, Şavk A, Cellat K, Gülbağca F, Nas SN,
Alma MH, Sen F (2019) Composites of Bimetallic Platinum-Cobalt
Alloy Nanoparticles and Reduced Graphene Oxide for
Electrochemical Determination of Ascorbic Acid, Dopamine, and
Uric Acid. Sci Rep 9:12258
Publisher’s note Springer Nature remains neutral with regard to jurisdic-
tional claims in published maps and institutional affiliations.
183 Page 12 of 12 J Polym Res (2020) 27: 183