The document describes the Passive Infrared Detector RX-40QZ. It uses Optex's patented "Quad Zone Logic" and "Optical Quad Technology" to divide the detection area into multiple zones and detect infrared energy changes in both upper and lower zones. This provides very accurate detection of humans while minimizing false alarms from small animals or temperature changes. The RX-40QZ also features a durable design, easy installation, selectable pulse count settings, and temperature compensation for stable performance in various environments.
This document describes leak detection technologies from Trotec for drinking water systems, including acoustic and trace gas leak detectors, wireless data loggers, and pressure loggers. The LD6000 combi detector allows acoustic pinpoint leak detection and trace gas detection in one device. Wireless loggers like the LD5L can be used for long-term monitoring and localization of leaks by measuring sound levels overnight and transmitting data to a mobile receiver. Pressure loggers such as the LD5DL are designed specifically for monitoring water pressure networks.
This document provides information on Cooper's range of intelligent addressable sensors, including optical, photo-thermal, and heat sensors. The sensors are soft addressed, have integral short circuit isolation, and feature 360-degree visibility LEDs. They are third party approved and designed to operate on Cooper intelligent addressable fire systems. The optical sensor detects slow burning fires, the photo-thermal sensor responds quickly to both slow and fast fires, and the heat sensor can be set to different temperature modes and is used where smoke detection may cause false alarms. All provide quick and simple installation with a common mounting base and discreet design.
The Symbol LS9208i is a high-performance, omni-directional presentation scanner that delivers increased productivity through a 100-line scanning pattern and robust features. It offers easy setup through the 123Scan utility and reduces costs with features like remote management. The scanner is durable, flexible, and reads a wide range of barcodes quickly to streamline retail and other operations.
1. Mount the detector within 25 feet of framed glass, ensuring a clear line of sight. Secure it with screws.
2. Wire the detector using 18-22 gauge wire. Connect wires to the appropriate terminals and tuck excess wire into the wall opening.
3. Configure the detector's settings using the DIP switches to select the desired sensitivity and operation mode.
4. Test the detector's operation using the glassbreak simulator to ensure proper activation and range. The green LED will flash if receiving audio correctly.
The document describes Honeywell's 5898 Wireless K-Band DUAL TEC Motion Sensor. It provides superior detection using both PIR and microwave technologies to reduce false alarms. It has an easy to install design with no adjustments needed. The sensor can be programmed remotely to change settings like sensitivity. It is suitable for both residential and commercial applications.
This document discusses Omnisens' DITEST system for distributed fiber optic leak detection. It summarizes that DITEST uses a single laser source and Brillouin scattering techniques to monitor thousands of locations along a single optical fiber with high sensitivity. DITEST offers long-range monitoring over 50km with 1m spatial resolution and temperature/strain measurement resolution of 0.5°C and 10mε. It provides continuous, real-time leak detection along pipelines with quick response times and no false alarms. DITEST is presented as offering significant advantages over alternative leak detection methods through its stability, sensitivity, scalability and lack of ongoing operational costs.
In-band OSNR Monitoring Technique based on Brillouin Fiber Ring LaserDavid Dahan
We propose an improved technique for in-band OSNR monitoring based on a Brillouin fiber ring laser seeded by the optical channel to be monitored. This technique shows a reduction of the required input power into the monitor along with a large and tunable dynamic OSNR monitoring range. It is demonstrated experimentally and numerically for various bit rates and modulation formats
This document summarizes a 700 TV line security camera with wide dynamic range capabilities. It has a horizontal resolution of 700 TV lines, 75dB wide dynamic range, and 3.7x variable focal lens. It uses DyanaViewSX technology to capture clear images in high-contrast scenes and less than ideal lighting. This includes a high-speed double shutter, iBLC compensation for dark scenes, and noise minimization. It also has an optical day/night function, wide auto tracing white range, and back light compensation.
This document describes leak detection technologies from Trotec for drinking water systems, including acoustic and trace gas leak detectors, wireless data loggers, and pressure loggers. The LD6000 combi detector allows acoustic pinpoint leak detection and trace gas detection in one device. Wireless loggers like the LD5L can be used for long-term monitoring and localization of leaks by measuring sound levels overnight and transmitting data to a mobile receiver. Pressure loggers such as the LD5DL are designed specifically for monitoring water pressure networks.
This document provides information on Cooper's range of intelligent addressable sensors, including optical, photo-thermal, and heat sensors. The sensors are soft addressed, have integral short circuit isolation, and feature 360-degree visibility LEDs. They are third party approved and designed to operate on Cooper intelligent addressable fire systems. The optical sensor detects slow burning fires, the photo-thermal sensor responds quickly to both slow and fast fires, and the heat sensor can be set to different temperature modes and is used where smoke detection may cause false alarms. All provide quick and simple installation with a common mounting base and discreet design.
The Symbol LS9208i is a high-performance, omni-directional presentation scanner that delivers increased productivity through a 100-line scanning pattern and robust features. It offers easy setup through the 123Scan utility and reduces costs with features like remote management. The scanner is durable, flexible, and reads a wide range of barcodes quickly to streamline retail and other operations.
1. Mount the detector within 25 feet of framed glass, ensuring a clear line of sight. Secure it with screws.
2. Wire the detector using 18-22 gauge wire. Connect wires to the appropriate terminals and tuck excess wire into the wall opening.
3. Configure the detector's settings using the DIP switches to select the desired sensitivity and operation mode.
4. Test the detector's operation using the glassbreak simulator to ensure proper activation and range. The green LED will flash if receiving audio correctly.
The document describes Honeywell's 5898 Wireless K-Band DUAL TEC Motion Sensor. It provides superior detection using both PIR and microwave technologies to reduce false alarms. It has an easy to install design with no adjustments needed. The sensor can be programmed remotely to change settings like sensitivity. It is suitable for both residential and commercial applications.
This document discusses Omnisens' DITEST system for distributed fiber optic leak detection. It summarizes that DITEST uses a single laser source and Brillouin scattering techniques to monitor thousands of locations along a single optical fiber with high sensitivity. DITEST offers long-range monitoring over 50km with 1m spatial resolution and temperature/strain measurement resolution of 0.5°C and 10mε. It provides continuous, real-time leak detection along pipelines with quick response times and no false alarms. DITEST is presented as offering significant advantages over alternative leak detection methods through its stability, sensitivity, scalability and lack of ongoing operational costs.
In-band OSNR Monitoring Technique based on Brillouin Fiber Ring LaserDavid Dahan
We propose an improved technique for in-band OSNR monitoring based on a Brillouin fiber ring laser seeded by the optical channel to be monitored. This technique shows a reduction of the required input power into the monitor along with a large and tunable dynamic OSNR monitoring range. It is demonstrated experimentally and numerically for various bit rates and modulation formats
This document summarizes a 700 TV line security camera with wide dynamic range capabilities. It has a horizontal resolution of 700 TV lines, 75dB wide dynamic range, and 3.7x variable focal lens. It uses DyanaViewSX technology to capture clear images in high-contrast scenes and less than ideal lighting. This includes a high-speed double shutter, iBLC compensation for dark scenes, and noise minimization. It also has an optical day/night function, wide auto tracing white range, and back light compensation.
The LaserCOMPACT detector provides aspirating smoke detection capabilities in a compact package. It uses laser-based smoke detection and dual-stage air filtration to provide very early warning detection. Key features include absolute smoke detection, a wide sensitivity range, single air inlet port, simple display, referencing capability, and VESDAnet communication (VN version). It has three alarm levels, programmable relays, air flow monitoring, and optional remote display/relay capability.
The document provides information on the SD355(A) Series Addressable Photoelectric Smoke Detectors. It summarizes that the detectors use photoelectric sensing to provide open area protection when used with Fire-Lite's Addressable Fire Alarm Control Panels. They have two-wire SLC loop connections, rotary decimal addressing, and LEDs that indicate local alarm. The detectors can be surface mounted or installed in electrical boxes and are constructed of fire-resistant plastic.
Murata RFID PCB Tag (UHF) With Magicstrap (Incl. Schneider Usecase)Alexander Schmoldt
The document discusses how Murata's MAGICSTRAP product can be used to add RFID tagging capabilities to printed circuit boards (PCBs). MAGICSTRAP is an RFID tag component that can be placed directly on existing metal layers in a PCB or other substrate to act as the antenna, without needing additional antenna circuitry. This allows PCBs and other electronics to be easily tagged for applications like supply chain management, traceability, and anti-counterfeiting. A case study is presented of how Schneider Electric uses MAGICSTRAP to tag their PCBs for improved production tracking and quality control.
The new Mirage Dual Technology detector builds on the success of the original award-winning Mirage detector. It has upgraded electronics, including a new state-of-the-art PCB antenna and advanced microprocessor utilizing complex software algorithms. It provides outstanding detection performance in harsh environments with triple LEDs and a fully adjustable microwave range. The detector has won the EASEM Gold Award for Innovation and features numerous enhancements like digital temperature compensation, neural environment learning, and additional inputs to assist installation.
The SCZ-3370 camera has a 37x optical zoom lens offering a maximum zoom ratio of 592x. It uses a Samsung SV-V DSP chipset for advanced features like 128x WDR, low light performance down to 0.7 lux, and Super Noise Reduction. The camera provides high resolution 600/700TVL imaging, powered zoom, day/night functionality, and analytics capabilities.
The SCO-2120RP is a 1/4" camera with day and night functionality, 600TVL resolution, and IP66 weatherproof housing. It has a 3.9-46mm varifocal lens, 12x optical and 16x digital zoom, 32 infrared LEDs for illumination up to 50m, and multiple language on-screen display. Powered by 12VDC or 24VAC, it has RS-485 and coaxitron serial interfaces and mounts for indoor or outdoor wall installation.
The document describes the CASBB384 intelligent addressable sounder beacon base. It can be used with a sensor as a sounder beacon base or standalone as a sounder beacon. It includes features of the CAS380 intelligent addressable sounder base plus an LED beacon. It has selectable tones controlled by the fire panel and adjustable volume. Connections for the sensor, sounder and beacon allow single point connection, saving time and installation costs.
The System Sensor Model BEAM1224 is a single-ended reflected beam smoke detector suited for protecting large, high-ceiling areas. It has a detection range of 16 to 328 feet and uses a transmitter/receiver unit and reflector. When smoke is detected between the units, an alarm is activated. The BEAM1224 has adjustable sensitivity levels and automatic sensitivity adjustment settings. It also features an integral sensitivity test option to allow for easy testing.
The GV-BCC825 is a 1/3" bullet camera with 24 infrared LEDs that provide sharp video in low light conditions. It has a 520TVL resolution, 4mm fixed lens, IP67 weather resistance, and mounts easily indoors or outdoors. Powered by 12VDC, the camera operates in temperatures from -10°C to 50°C with 10-90% humidity for reliable surveillance in demanding environments.
The document describes the Shimadzu FTIR-8400S Fourier Transform Infrared Spectrophotometer. It maintains optimal interferometer alignment automatically through a dynamic alignment system, ensuring high quality and reproducible spectra. It also includes IRsolution software for easy analysis and compliance with FDA regulations. Key features include high signal-to-noise ratio, automatic validation of instrument performance, and data processing and analysis capabilities.
App152 en measurement-railroad-rails-laser-profile-sensorsISATECK
The document discusses using laser profile sensors to measure railroad rails to assess wear and prevent costly incidents from derailment. It describes mounting two synchronized scanCONTROL 2800 sensors under inspection cars traveling up to 100 km/h to quickly and accurately measure full rail profiles. The scanCONTROL 2800 sensors are the fastest and most precise available, meeting the demanding speed and accuracy needs for rail inspection.
The MIU872 is a single zone micro interface unit that can connect up to 20 conventional fire detectors to an intelligent fire alarm panel. It has built-in short circuit isolation and monitors the input zone for open and short circuit faults. Installation is quick and simple as it requires no addressing and can use existing wiring.
App035 en non-contact-roller-measuring-deviceISATECK
This document summarizes a laser-optical displacement sensor system for non-contact measurement of roller wear in cement and mineral industry roller mills. The system uses two laser sensors to measure the displacement of up to 210mm between the hard and floating rollers with accuracy below 1mm. It provides high-speed measurement up to 10kHz to monitor roller wear and initiate regrinding processes at the optimal time. The sensors are protected from vibration and dust by a protective device with damping elements and air nozzles.
How can variables be measured in environments that are too hot, too cold, or moving too fast for traditional circuit-based sensors? A new technology for obtaining multiple, real-time measurements under extreme environmental conditions is being developed under Phase 1 and 2 funding contracts from NASA's Kennedy Space Center’s Small Business Technology Transfer (STTR) program. Opportunities for early deployment licensing and Phase 3 STTR contracts are now being accepted.
Passive, remote measuring systems can be created using new Orthogonal Frequency Code (OFC) multiplexing techniques and specially developed, next-generation SAW sensors. As a result, very cost-effective applications such as spaceflight sensing (for instance, temperature, pressure, or acceleration monitoring), remote cryogenic fluid level sensing, or an almost limitless number of other rigorous monitoring applications are possible.
1) The document discusses OCT technology, including its principles and history of development. OCT uses low coherence interferometry to perform high-resolution cross-sectional imaging of biological tissues.
2) Time-domain OCT was initially developed but newer Fourier-domain OCT provides faster acquisition speed and higher resolution.
3) The document reviews various clinical applications of OCT in ophthalmology, including imaging of the retina, glaucoma, cornea, and cataracts. Common scanning patterns and what can be observed are described for retinal and glaucoma examination.
Novel readout chain for imaging calorimeteryeguliyev
Novel concept of ASIC readout developed for Electromagnetic Calorimeter base on Silicon pixel sensor and tungsten absorber. The performance of multi-channel and dual gain ASIC tested with injected charge and 3 GeV electron beam. Obtained results confirmed the ability of ASIC .
This document provides information on the RX-40QZ/40PT passive infrared detectors. It summarizes that the detectors use patented Quad Zone Logic and spherical lens design to accurately detect humans while discriminating against other heat sources like animals. The detectors also use Optical Quad Technology with taller detection zones to provide accurate detection in hostile environments. Options include standard Quad Zone Logic detection or models with pet tolerance. Accessories include wall mounts and long range lenses.
This document discusses several emerging technologies that could potentially be weaponized and become weapons of mass destruction (WMDs) between 2010-2075. These include smart dust, smart clothing, smart bacteria, gel computing, conscious botnets, information waves, optical brain computers, and a solar wind deflection gun. The document warns that advances in nanotechnology, biotechnology, information technology and cognitive science could enable new types of extremism, terrorism and pose catastrophic risks if not developed and applied carefully and ethically. Overall the document presents a vision of rapidly advancing future technologies and their potential for both benefit and misuse unless precautions are taken to guide their development responsibly.
The InnovairFlex D2 2-wire photoelectric duct smoke detector has a pivoting housing that fits both square and rectangular ducts. It senses airflow from 100-4,000 feet per minute and has improved resistance to false alarms. The detector's modular design simplifies installation and maintenance in harsh duct environments. Accessories include remote test stations and annunciators for flexible system integration.
The Outdoor MotionViewer Camera DCV is a battery-operated, wireless outdoor motion-activated camera that uses S2View spread spectrum technology. It features a CMOS sensor, 85 degree lens, motion and tamper detection, two-year battery life, and transmits video to the control panel upon detecting motion within 12 meters. The camera is fully waterproof and can withstand temperatures from -20 to 60 degrees Celsius.
UHF RFID tags called Magicstraps can be embedded directly into printed circuit boards. Magicstraps are rewritable RFID chips with an integrated antenna matching circuit, allowing them to be used as-is on PCBs without additional antenna components. Embedding Magicstraps turns PCBs into smart, traceable products with RFID capabilities. This allows applications like anti-counterfeiting, inventory management and predictive maintenance across the entire supply chain.
The LaserSCANNER is a VESDA air sampling smoke detector that can divide its detection area into four separate sectors. It draws air from all sectors and uses a laser to quickly scan and identify which sector is carrying smoke during an alarm. It has adjustable alarm thresholds for each sector to optimize detection. Key features include individual sector identification and monitoring, adaptive scanning, VESDAnet communication, and software for automatic setup and environmental compensation.
The LaserCOMPACT detector provides aspirating smoke detection capabilities in a compact package. It uses laser-based smoke detection and dual-stage air filtration to provide very early warning detection. Key features include absolute smoke detection, a wide sensitivity range, single air inlet port, simple display, referencing capability, and VESDAnet communication (VN version). It has three alarm levels, programmable relays, air flow monitoring, and optional remote display/relay capability.
The document provides information on the SD355(A) Series Addressable Photoelectric Smoke Detectors. It summarizes that the detectors use photoelectric sensing to provide open area protection when used with Fire-Lite's Addressable Fire Alarm Control Panels. They have two-wire SLC loop connections, rotary decimal addressing, and LEDs that indicate local alarm. The detectors can be surface mounted or installed in electrical boxes and are constructed of fire-resistant plastic.
Murata RFID PCB Tag (UHF) With Magicstrap (Incl. Schneider Usecase)Alexander Schmoldt
The document discusses how Murata's MAGICSTRAP product can be used to add RFID tagging capabilities to printed circuit boards (PCBs). MAGICSTRAP is an RFID tag component that can be placed directly on existing metal layers in a PCB or other substrate to act as the antenna, without needing additional antenna circuitry. This allows PCBs and other electronics to be easily tagged for applications like supply chain management, traceability, and anti-counterfeiting. A case study is presented of how Schneider Electric uses MAGICSTRAP to tag their PCBs for improved production tracking and quality control.
The new Mirage Dual Technology detector builds on the success of the original award-winning Mirage detector. It has upgraded electronics, including a new state-of-the-art PCB antenna and advanced microprocessor utilizing complex software algorithms. It provides outstanding detection performance in harsh environments with triple LEDs and a fully adjustable microwave range. The detector has won the EASEM Gold Award for Innovation and features numerous enhancements like digital temperature compensation, neural environment learning, and additional inputs to assist installation.
The SCZ-3370 camera has a 37x optical zoom lens offering a maximum zoom ratio of 592x. It uses a Samsung SV-V DSP chipset for advanced features like 128x WDR, low light performance down to 0.7 lux, and Super Noise Reduction. The camera provides high resolution 600/700TVL imaging, powered zoom, day/night functionality, and analytics capabilities.
The SCO-2120RP is a 1/4" camera with day and night functionality, 600TVL resolution, and IP66 weatherproof housing. It has a 3.9-46mm varifocal lens, 12x optical and 16x digital zoom, 32 infrared LEDs for illumination up to 50m, and multiple language on-screen display. Powered by 12VDC or 24VAC, it has RS-485 and coaxitron serial interfaces and mounts for indoor or outdoor wall installation.
The document describes the CASBB384 intelligent addressable sounder beacon base. It can be used with a sensor as a sounder beacon base or standalone as a sounder beacon. It includes features of the CAS380 intelligent addressable sounder base plus an LED beacon. It has selectable tones controlled by the fire panel and adjustable volume. Connections for the sensor, sounder and beacon allow single point connection, saving time and installation costs.
The System Sensor Model BEAM1224 is a single-ended reflected beam smoke detector suited for protecting large, high-ceiling areas. It has a detection range of 16 to 328 feet and uses a transmitter/receiver unit and reflector. When smoke is detected between the units, an alarm is activated. The BEAM1224 has adjustable sensitivity levels and automatic sensitivity adjustment settings. It also features an integral sensitivity test option to allow for easy testing.
The GV-BCC825 is a 1/3" bullet camera with 24 infrared LEDs that provide sharp video in low light conditions. It has a 520TVL resolution, 4mm fixed lens, IP67 weather resistance, and mounts easily indoors or outdoors. Powered by 12VDC, the camera operates in temperatures from -10°C to 50°C with 10-90% humidity for reliable surveillance in demanding environments.
The document describes the Shimadzu FTIR-8400S Fourier Transform Infrared Spectrophotometer. It maintains optimal interferometer alignment automatically through a dynamic alignment system, ensuring high quality and reproducible spectra. It also includes IRsolution software for easy analysis and compliance with FDA regulations. Key features include high signal-to-noise ratio, automatic validation of instrument performance, and data processing and analysis capabilities.
App152 en measurement-railroad-rails-laser-profile-sensorsISATECK
The document discusses using laser profile sensors to measure railroad rails to assess wear and prevent costly incidents from derailment. It describes mounting two synchronized scanCONTROL 2800 sensors under inspection cars traveling up to 100 km/h to quickly and accurately measure full rail profiles. The scanCONTROL 2800 sensors are the fastest and most precise available, meeting the demanding speed and accuracy needs for rail inspection.
The MIU872 is a single zone micro interface unit that can connect up to 20 conventional fire detectors to an intelligent fire alarm panel. It has built-in short circuit isolation and monitors the input zone for open and short circuit faults. Installation is quick and simple as it requires no addressing and can use existing wiring.
App035 en non-contact-roller-measuring-deviceISATECK
This document summarizes a laser-optical displacement sensor system for non-contact measurement of roller wear in cement and mineral industry roller mills. The system uses two laser sensors to measure the displacement of up to 210mm between the hard and floating rollers with accuracy below 1mm. It provides high-speed measurement up to 10kHz to monitor roller wear and initiate regrinding processes at the optimal time. The sensors are protected from vibration and dust by a protective device with damping elements and air nozzles.
How can variables be measured in environments that are too hot, too cold, or moving too fast for traditional circuit-based sensors? A new technology for obtaining multiple, real-time measurements under extreme environmental conditions is being developed under Phase 1 and 2 funding contracts from NASA's Kennedy Space Center’s Small Business Technology Transfer (STTR) program. Opportunities for early deployment licensing and Phase 3 STTR contracts are now being accepted.
Passive, remote measuring systems can be created using new Orthogonal Frequency Code (OFC) multiplexing techniques and specially developed, next-generation SAW sensors. As a result, very cost-effective applications such as spaceflight sensing (for instance, temperature, pressure, or acceleration monitoring), remote cryogenic fluid level sensing, or an almost limitless number of other rigorous monitoring applications are possible.
1) The document discusses OCT technology, including its principles and history of development. OCT uses low coherence interferometry to perform high-resolution cross-sectional imaging of biological tissues.
2) Time-domain OCT was initially developed but newer Fourier-domain OCT provides faster acquisition speed and higher resolution.
3) The document reviews various clinical applications of OCT in ophthalmology, including imaging of the retina, glaucoma, cornea, and cataracts. Common scanning patterns and what can be observed are described for retinal and glaucoma examination.
Novel readout chain for imaging calorimeteryeguliyev
Novel concept of ASIC readout developed for Electromagnetic Calorimeter base on Silicon pixel sensor and tungsten absorber. The performance of multi-channel and dual gain ASIC tested with injected charge and 3 GeV electron beam. Obtained results confirmed the ability of ASIC .
This document provides information on the RX-40QZ/40PT passive infrared detectors. It summarizes that the detectors use patented Quad Zone Logic and spherical lens design to accurately detect humans while discriminating against other heat sources like animals. The detectors also use Optical Quad Technology with taller detection zones to provide accurate detection in hostile environments. Options include standard Quad Zone Logic detection or models with pet tolerance. Accessories include wall mounts and long range lenses.
This document discusses several emerging technologies that could potentially be weaponized and become weapons of mass destruction (WMDs) between 2010-2075. These include smart dust, smart clothing, smart bacteria, gel computing, conscious botnets, information waves, optical brain computers, and a solar wind deflection gun. The document warns that advances in nanotechnology, biotechnology, information technology and cognitive science could enable new types of extremism, terrorism and pose catastrophic risks if not developed and applied carefully and ethically. Overall the document presents a vision of rapidly advancing future technologies and their potential for both benefit and misuse unless precautions are taken to guide their development responsibly.
The InnovairFlex D2 2-wire photoelectric duct smoke detector has a pivoting housing that fits both square and rectangular ducts. It senses airflow from 100-4,000 feet per minute and has improved resistance to false alarms. The detector's modular design simplifies installation and maintenance in harsh duct environments. Accessories include remote test stations and annunciators for flexible system integration.
The Outdoor MotionViewer Camera DCV is a battery-operated, wireless outdoor motion-activated camera that uses S2View spread spectrum technology. It features a CMOS sensor, 85 degree lens, motion and tamper detection, two-year battery life, and transmits video to the control panel upon detecting motion within 12 meters. The camera is fully waterproof and can withstand temperatures from -20 to 60 degrees Celsius.
UHF RFID tags called Magicstraps can be embedded directly into printed circuit boards. Magicstraps are rewritable RFID chips with an integrated antenna matching circuit, allowing them to be used as-is on PCBs without additional antenna components. Embedding Magicstraps turns PCBs into smart, traceable products with RFID capabilities. This allows applications like anti-counterfeiting, inventory management and predictive maintenance across the entire supply chain.
The LaserSCANNER is a VESDA air sampling smoke detector that can divide its detection area into four separate sectors. It draws air from all sectors and uses a laser to quickly scan and identify which sector is carrying smoke during an alarm. It has adjustable alarm thresholds for each sector to optimize detection. Key features include individual sector identification and monitoring, adaptive scanning, VESDAnet communication, and software for automatic setup and environmental compensation.
This document provides an overview of using an OTDR (Optical Time Domain Reflectometer) to test fiber optic cabling. It discusses OTDR functionality and how to properly set up the device, including setting the range, pulse width, index of refraction, and averaging time. It also covers analyzing OTDR traces to evaluate specific events and faults along a cable span.
The document describes the Ultraprobe 15,000 Touch, a handheld ultrasonic condition monitoring device. It has a touch screen interface that allows users to analyze machine conditions, review alarm groups, generate reports, and more. All inspection needs can be done with the palm-sized device, including analyzing sound and temperature readings, storing data and images, and reviewing historical records. The touch screen makes ultrasonic inspection simple via intuitive icons. The device is robust yet easy to use, suitable for many plant applications like leak detection, bearing inspection, and electrical equipment analysis.
W-BAND RADIOMETER SYSTEM WITH SWITCHING FRONT-END FOR MULTI-LOAD CALIBRATION.pdfgrssieee
The document describes a W-band radiometer system with a switching front-end for multi-load calibration. It includes a single-pole-five-throw switch that allows for fast switching between multiple reference loads for internal calibration. Modules use metamorphic high-electron-mobility transistor technology and achieve gains over 20 dB up to 105 GHz with noise figures of 2 dB. The system provides a compact alternative to external hot-cold calibration with moving parts. It will allow for integrated active loads and faster calibration times.
This document describes the development of a low-power wireless sensor network for monitoring carbon dioxide (CO2) levels. It consists of laser spectroscopic sensor nodes that measure CO2 concentrations with high sensitivity and selectivity. Laboratory tests showed temperature induced drift affecting long-term sensor performance. The researchers stabilized sensor temperature in a controlled chamber, eliminating drift. They demonstrated a proof-of-concept two-node network operating continuously for 8 hours, with the data revealing details about human activity levels in the lab over time. Future work includes developing real-time calibration to address drift and deploying a large-scale field network for long-term trace gas monitoring.
The Lornet is a lightweight, compact non-linear junction detector that can detect electronic devices containing semiconductors in both powered on and off states. It weighs less than 1 kg, has a thin 18mm antenna allowing access to hard to reach places, and offers both continuous and pulsed output modes with powers of 1W and 15W respectively. It also has wireless headphones and automatic frequency selection for complex environments.
The document describes the NETWORKSUPERVISIONTM DTX CableAnalyzer Series from Fluke Networks. It offers the following key benefits:
1) It significantly reduces the total time to certify fiber networks by improving every aspect of the testing process, including faster testing speeds, accurate results, long battery life, and easy setup and reporting.
2) It delivers fast certification of basic Tier 1 fiber through automated testing features and integrated fiber inspection tools.
3) It enables extended Tier 2 fiber certification by shooting traces with its optional Compact OTDR module to measure loss and reflectivity along fiber links.
The document provides instructions for operating an infrared hydrocarbon gas detector. It can be used as a standalone detector or as part of a larger safety system. It continuously monitors combustible gases from 0-100% LEL and has configurations that output analog signals or provide alarm relays. It operates by measuring the absorption of infrared light by hydrocarbon gases in its measurement chamber.
The document summarizes the specifications and features of the Texecom Odyssey 3 external sounder and strobe series. Key features include a 115dB volume, IP65 sealed electronics, selectable SAB/SCB mode, screw, lid, and wall tamper protection, twin alternating LEDs, and revolutionary screw retention system. It is competitively priced, easy to install, and provides uncompromising performance for professional security installations.
The document describes the TOA VM-3000 series integrated voice evacuation system. It is an EN 54 compliant system that combines emergency voice alarm and public address functions. Key features include fully digital audio processing and control, built-in voice messages, monitoring of speaker lines, and support for paging, background music, and microphone inputs. The system is suitable for small to medium venues and provides emergency evacuation and general announcement capabilities.
The document describes the TOA VM-3000 series integrated voice evacuation system. The VM-3000 series provides both emergency evacuation functions and general public address/paging functions. It is EN 54 certified and ideal for small to medium venues. The system has integrated amplifiers, supports up to 60 speaker zones, and can be configured via software.
This document provides installation instructions for installing a SV-200MA Surveillance Board in VM-2120 or VM-2240 amplifiers. The SV-200MA adds monitoring, zone control, and backup amplifier functions. It consists of an SV-200M board and SV extension board. The 10 step installation process includes setting jumpers, connecting cables between the boards, mounting the surveillance board, and replacing the amplifier cover.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's CS-154 and CS-304 outdoor wide-range speakers. The speakers use wide-range horns to provide high quality background music or paging announcements over a wide area. They are designed for outdoor use and have weatherproof enclosures that can withstand demanding environmental conditions. The speakers have adjustable impedance settings and provide high output with increased efficiency through the use of a horn and cone speaker combination.
The document describes the TOA BS-678 wall mount speaker system. It is a double-cone speaker with a wooden cabinet and stylish, compact design. It produces high quality sound for background music and announcements. Key features include an adjustable input impedance selector, push-in connector for easy wiring, and horizontal or vertical mounting orientation. Specifications include a frequency response of 150-20,000Hz, 6W or 3W power handling, and an off-white finish.
The document describes the TOA BS-633A/633AT wall mount speaker systems. The BS-633A is a basic 5" cone speaker with a transformer allowing multiple power taps. The BS-633AT includes an additional built-in attenuator, allowing connection to 2-wire and 3-wire speaker systems. Both have a compact ABS resin enclosure and push-in terminal for easy installation. Key specifications include a frequency response of 120-15,000Hz, 91dB sensitivity, and multiple power taps for 100V and 70V speaker lines.
This document summarizes an LB1-UW06-Fx cabinet loudspeaker from Bosch. It is a 6W loudspeaker intended for indoor use. It has mounting brackets for wall or ceiling mounting. It is constructed of MDF and has a durable vinyl or cloth covering available in white or black. It provides good speech intelligibility and background music reproduction.
This document summarizes a 6W loudspeaker for indoor use. It has good speech intelligibility and background music reproduction. The loudspeaker has an MDF construction with mounting brackets for wall or ceiling installation. It complies with international safety regulations and certifications.
The LA1-UW36-x is a 36W column loudspeaker for indoor use where directivity is important. It has high sensitivity and provides good speech intelligibility and background music reproduction. It has a swivel wall mounting bracket and is available in black or white. It uses four dual cone drivers and a durable MDF enclosure for reliability under extreme conditions.
The LA1-UW24-x is a 24W column loudspeaker for indoor use where directivity is important. It has good speech intelligibility and background music reproduction. It comes with a swivel wall-mounting bracket and is available in black or white. It has four high-sensitivity drivers and can be powered at full, half, or quarter power via a terminal block on the rear.
This document provides specifications for a BGT 4139TS video camera model. It includes details on the camera's image sensor, resolution, lenses, operational features like auto day/night mode and infrared LEDs, environmental tolerances, electrical requirements, mechanics including dimensions and weight, and manufacturer. The camera has a 1/3" CCD sensor, 600TVL resolution, auto settings, infrared for night vision up to 20 meters, and an IP66-rated casing.
This document provides specifications for a BGT 5504A camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. It has a 1/4" CCD image sensor, 420TVL resolution, auto day/night mode, 15m infrared range, and measures 92mm diameter by 80mm, weighing 190g.
This data sheet provides specifications for the BGT 5140A video camera, including its CCD image sensor, PAL/NTSC compatibility, effective pixel count, 420TVL horizontal resolution, low light performance down to 0.5 lux, auto day/night functionality, 3.6mm fixed focal length lens, operating temperature range of -10°C to 50°C, power requirements of 12V 150mA with a 12V 1A adapter, and compact dimensions of 60x90x190g.
This data sheet provides specifications for a BGT 9120TS security camera model. It lists technical details such as the CCD image sensor and effective pixel resolution, as well as operational features including auto day/night mode, backlight compensation, and automatic gain control. Environmental specifications note an operating temperature range of -10°C to 50°C and IP66 protection rating. The camera is powered by a 12V 370mA power supply and has dimensions of 266x97x63mm.
This data sheet provides specifications for a BGT 9119AS video camera model. It has a 1/3 inch Sony CCD image sensor that can capture video in PAL or NTSC formats with effective pixel counts of 752x582 or 768x494 respectively. The camera has a 3.6/6mm fixed lens, auto day/night functionality, and can function in temperatures from -10 to 50 degrees Celsius. It is powered by a 12V 1A adapter and has IP67 protection against dust and water.
This document provides specifications for the BGT 720TOS security camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. Key specs include a 1/3" Sony CCD image sensor, 600TVL horizontal resolution, auto day/night functionality, auto electronic shutter speed range of 1/50-1/100,000 sec for PAL and 1/60-1/100,000 sec for NTSC, operating temperature range of -10°C to +50°C, input voltage of DC12V/150mA, and compact dimensions of 102*55*40mm.
This document provides specifications for the BGT 5221AS video camera model. It includes details about the camera's image sensor, resolution, lenses, video output, day/night functionality, electrical requirements, and dimensions. Key features noted are a 1/3" Sony CCD image sensor, 480TVL horizontal resolution, auto day/night mode, infrared LEDs for night vision up to 10 meters, and DC12V 400mA power input. The camera measures 90*108*108mm and weighs 300g.
1. PASSIVE INFRARED DETECTOR
RX-40QZ
QUAD ZONE LOGIC
Optex improves its patented "Multifocus Optics" technology to create "Quad Zone
Logic" for accurate detection of humans. Using this logic the RX-40QZ has been
designed to give extremely high false alarm protection with tolerance to spot
temperature changes from curtains or small animals.
Optex's Optical Quad Technology uses taller detection zones divided into upper
and lower areas. It detects IR energy changes in both areas and then couples them
for extremely accurate detections, offering very high reliability in hostile areas.
2. Passive Infrared Detector FEATURES
RX-40QZ
TECHNOLOGY FOR HIGHEST RELIABILITY
Quad Zone Logic - Improved Patented Technology
Quad Zone Logic provides multi 5 10 15 20 25 30 35 40 ft.
0
segmented detection zones throughout
Mounting Knockout the detection area. An alarm signal is
(Pitch = 2.63inch/66.7mm)
created by the cumulated total IR energy
2.4 8 ft.
Tamper Switch
of each zone. It is designed to provide 4 1 2 4 6 8 10 12m
LED
Alarm Wiring Knockouts Sealing to 8 zones for a human sized object to
Indicator Sponge Terminals
create sharp and maximum signals for
stable detection. Spot temperature
Lens changes, i.e. by rodents or curtains etc.,
may affect only one or two zones at the
same time creating a smaller detection
signal. These signals are further
analysed by the "ECO" Chip and signal
processing circuit for accurate detection
Cover Fastening and filtering out of false alarms.
Screw
Sealed
Wiring Guide
Optics Spherical Lens
Sensor Foam
(Do not touch) - Technology to Back Up Quad Zone Logic
Pulse Count Obtains an accurate focal length for each detection zone
LED ON/OFF Selector (2/4)
Switch and maximises the performance of Quad Zone Logic.
TROUBLE-FREE & EASY INSTALLATION PERFORMANCE
Sealed Housing Trouble-Free & RFI Protection Temperature Compensation Logic
Prevents drafts and Easy Knockouts No alarm at 20V/m from 100MHz Eco chip includes temperature
insects from reaching Simply push with a screwdriver to 1 GHz compensation circuit. It controls
the pyro element. to open a hole of matching size sensitivity to improve stability
with the cables. against changes in environmental
conditions.
Optional Multi-Angle Bracket
Sealed FA-3
Optics Wall & Ceiling Mounting Bracket
Foam Horizontally 45¡, Vertically 0¡ to 15¡ downwards
Durable Spherical Lens and
Housing Design FL-60N
Pyro- Long Range (Extremely Dense
electric
Good Wiring Space and Guide Multi Layer Curtain Lens)
Element Selectable Pulse Count :
2 or 4
LED On/Off Switch
DETECTION PATTERNS SPECIFICATIONS
Model RX-40QZ *FL-60N (Optional Lens for Long Range Curtain Pattern)
WIDE ANGLE LONG RANGE
(OPTIONAL LENS : FL-60N) Detection Method Passive Infrared Coverage Long: 18m x 1.8m (60ft x 6ft) Long Range
TOP VIEW TOP VIEW Coverage Wide: 12m x 12m (40ft x 40ft), 85 wide Detection Zones Long: 20 zones
5 10 15 20 25 30 35 40ft Detection Zones Wide: 78 zones
6 20ft Mounting Height 1.5 2.4m (5 8ft)
4
15
Sensitivity
Detection Speed
2 C at 0.6m/sec. (3.6 F at 2ft/sec.)
0.3 1.5m/sec. (1 5ft/sec.)
DIMENSIONS
10
0 10 20 30 40 50 60ft LED Alarm Indicator Switchable On/Off 62(2.44)
2 1.5m 5ft
5
Alarm Period Approx. 2.5 sec.
0 0
0 0
1.5m 5ft Alarm Output N.C., 28VDC, 0.2A max.
5
0 5 10 15 18m Tamper Switch N.C., Open when cover is removed
97(3.82)
2
Pulse Count Approx. 20 sec. 2 or 4
10
4 Warm-up Period Approx. 30 sec.
15
Power Supply 9.5 16VDC
6 20ft Current Consumption 8mA (normal),11mA (max.) at 12VDC
2 4 6 8 10 12m Weight 70g (2.5 oz.)
SIDE VIEW SIDE VIEW Operating Temperature -20 C +50 C (-4 F +122 F) 44(1.73)
0 10 20 30 40 50 60ft
0 5 10 15 20 25 30 35 40ft Operating Humidity 95% max.
RF Interference No Alarm 20V/m mm (inch)
Specifications and design are subject to change without prior notice.
2.4m 8ft 2.4m
NOTE: This unit is designed to detect movement of an intruder and activate an alarm control panel. Being only a part of a complete system, we can not
0 2 4 6 8 10 12m 0 5 10 15 18m
accept responsibility for any damages or other consequences resulting from an intrusion. This product conforms to the EMC Directive. 89/336 EEC.
OPTEX CO., LTD. (ISO 9001 Certified by LRQA / ISO14001 Certified by JET)
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL +81(0)77 579 8670 FAX +81(0)77 579 8190 http://www.optex.co.jp/e
OPTEX INCORPORATED (USA) http://www.optexamerica.com
OPTEX (EUROPE) LTD. (UK) http://www.optexeurope.com
(ISO9001 Certified by NQA)
OPTEX SECURITY SAS (FRANCE) http://www.optex-security.com
OPTEX KOREA CO., LTD. (KOREA) http://www.optexkorea.com
ÒTake Care of the EnvironmentÓ This catalogue uses recycled paper No. 75013-13-909-0503