The document discusses camera composition techniques including the rule of thirds, which recommends placing subjects along the lines or intersections of an imaginary three-by-three grid overlaid on the frame to create a more aesthetically pleasing image. It also advises having a foreground, middleground, and background, with the middleground being in focus as the focal point and the other areas out of focus to add depth and interest to photos. Experimenting with both portrait and landscape orientations and different layouts is encouraged.
An Architectural Photography DIY, the presentation has been divided into two major categories:
External Architecture
Internal Architecture
Besides these two major categories, basic principles of photography has also been covered like:
Composition
Simplification
Limiting Focus
Symmetry
Viewpoint
Lines
Week 8, Using Whitespace
Presentation from Introduction to Graphic Design, Columbia College Chicago. Much of the content taken from readings, including the textbooks: Timothy Samara's "Design Elements" and "Design Evolution." Other references cited in presentation. Please note: many slides are intended for class discussion and might not make sense out of context.
An Architectural Photography DIY, the presentation has been divided into two major categories:
External Architecture
Internal Architecture
Besides these two major categories, basic principles of photography has also been covered like:
Composition
Simplification
Limiting Focus
Symmetry
Viewpoint
Lines
Week 8, Using Whitespace
Presentation from Introduction to Graphic Design, Columbia College Chicago. Much of the content taken from readings, including the textbooks: Timothy Samara's "Design Elements" and "Design Evolution." Other references cited in presentation. Please note: many slides are intended for class discussion and might not make sense out of context.
Nuove potenzialità e nuove problematiche della stampa 3D: progettazione condi...Claudio Gasparini
La diffusione delle stampanti 3D introduce nuove potenzialità di progettazione e di realizzazione ma al tempo stesso presenta anche nuovi quesiti non ancora risolti.
E’ possibile infatti modificare radicalmente il processo di progettazione ricorrendo alla condivisione in rete dei modelli, secondo lo spirito collaborativo che si sta diffondendo con i social forum, ma fa emergere anche problematiche che sfidano le regole tradizionali della produzione e della comunicazione improntate sul copyright e sul diritto d’autore.
Strumenti e sistemi di progettazione per la stampa 3DClaudio Gasparini
Nel 2006 è scaduto il brevetto della tecnologia FDM – Fused deposition modeling (Modellazione a deposizione fusa) per le stampanti 3D.
Nel febbraio 2014 è scaduto il brevetto della tecnologia di sinterizzazione, (Selective Laser Sintering o SLS)
Ora stanno arrivando le stampanti 3D SLS che sono più veloci e più precise.
"Italiani, scatenate la vostra creatività" Bre Pettis CEO di Makerbot
Dal mio intervento "Strumenti e sistemi di progettazione per la stampa 3D"
al SAIE Academy 2014 Bologna 25/10/2014
"Italians, unleash your creativity!" Bre Pettis CEO di Makerbot
presentazione fatta alla Design Library di Milano il 22 novembre 2012. Si è parlato di come la fabbricazione digitale stia cambiando la progettazione e il contesto in cui il design si sviluppa
Slide per un corso sulla stampa 3D. Le slide raccontano la storia delle stampanti 3D in Italia e nel mondo, il funzionamento delle macchine e dei programmi per la stampa 3D.
Dall'idea all'oggetto: i nuovi paradigmi di progettazione nel design Claudio Gasparini
Le stampanti 3D forniscono ai progettisti una nuova possibilità di realizzazione fisica della loro idea in modo veloce ed economico a partire da un disegno realizzato da un programma CAD.
E’ importante per il progettista e anche a chi fa sculture in prototipazione avere una buona conoscenza delle tecniche di modellazione e di stampa.
Per tradurre un’idea in oggetto è necessario che il progettista conosca non solo le potenzialità ma anche i limiti del programma CAD che intende utilizzare, inoltre deve seguire dei corretti paradigmi di modellazione che variano a seconda della forma.
Ad esempio ci sono diversi modi di progettare una semplice tazzina da caffè che sono condizionati dalla geometria e dalla tipologia della stampante che la deve produrre.
Open Makers Italy - L'importanza della prototipazione per la creazione di una...Andrea Paraggio
L'importanza della prototipazione per la creazione di una silicon valley campana
Talk per bottega delle mani fiera dell'artigianato 2.0
Authors: Andrea Paraggio, Francesco Paraggio
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
2. Rule of Thirds You add a great deal of dramatic interest by placing your subject at any point where the lines cross. This is called the Rule of Thirds.
