This document provides product information for Rosemount Analytical pneumatic power positioners. It describes that the positioners are used to accurately control process valves, dampers, and feed mechanisms in response to a demand signal. It lists features such as mounting varieties, characterized positioning with different cam options, air locking, fail safe modes, and manual operators. Specifications are provided for different models with details like size, torque and thrust capabilities, air supply requirements, inputs, performance metrics, and options.
White paper provides description of function and application of current to pneumatic (I/P) transducers, along with operational diagrams and recommended practices.
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has extended temperature ranges and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Jordan Valve’s unique Seal Welded Actuator (SWA), used in conjunction with Jordan’s sliding gate seat, provides exceptional accuracy and long life in a direct operated industrial temperature regulator. The Jordan Valve Mark 80 is the most accurate and durable industrial temperature regulator available in the market today.
The Oxymitter™ 4000 In Situ Oxygen Transmitter is the world's first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement with an explosion-proof rating. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
The TeleSensor is an external liquid level transmitter that uses a force balance principle to measure liquid levels in tanks. It has a flange that mounts to the outside of tanks and a diaphragm that senses the hydrostatic pressure from the liquid height. This pressure is converted to a proportional 4-20 mA electrical or pneumatic output signal. It can interface with indicators or controllers to monitor levels remotely. The system is largely unaffected by temperature and immune to drift, making it suitable for applications requiring accurate and reliable level measurement.
Yokogawa released the world's first vortex flowmeter in 1968. Thanks to its long-term stability and high accuracy, our customers have achieved significant improvements in productivity over the past forty years. In response to ever changing market needs, Yokogawa has gone on to release high temperature, cryogenic, dual-sensor, reduced bore, and FOUNDATION Fieldbus communication versions of this product.
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
Process Digital Bargraph Display for Industrial Control and AutomationClassic Controls, Inc.
Commercial bargraphs are designed for use in non-nuclear environments. They may be used as HI-LO, on/off, or differential gap controllers and/or annunciators in process or other control applications. Fully programmable, these are the preferred choice for new applications, or for replacement of set point controllers, switchboard meters, other common size indicators.
White paper provides description of function and application of current to pneumatic (I/P) transducers, along with operational diagrams and recommended practices.
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has extended temperature ranges and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Jordan Valve’s unique Seal Welded Actuator (SWA), used in conjunction with Jordan’s sliding gate seat, provides exceptional accuracy and long life in a direct operated industrial temperature regulator. The Jordan Valve Mark 80 is the most accurate and durable industrial temperature regulator available in the market today.
The Oxymitter™ 4000 In Situ Oxygen Transmitter is the world's first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement with an explosion-proof rating. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
The TeleSensor is an external liquid level transmitter that uses a force balance principle to measure liquid levels in tanks. It has a flange that mounts to the outside of tanks and a diaphragm that senses the hydrostatic pressure from the liquid height. This pressure is converted to a proportional 4-20 mA electrical or pneumatic output signal. It can interface with indicators or controllers to monitor levels remotely. The system is largely unaffected by temperature and immune to drift, making it suitable for applications requiring accurate and reliable level measurement.
Yokogawa released the world's first vortex flowmeter in 1968. Thanks to its long-term stability and high accuracy, our customers have achieved significant improvements in productivity over the past forty years. In response to ever changing market needs, Yokogawa has gone on to release high temperature, cryogenic, dual-sensor, reduced bore, and FOUNDATION Fieldbus communication versions of this product.
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
Process Digital Bargraph Display for Industrial Control and AutomationClassic Controls, Inc.
Commercial bargraphs are designed for use in non-nuclear environments. They may be used as HI-LO, on/off, or differential gap controllers and/or annunciators in process or other control applications. Fully programmable, these are the preferred choice for new applications, or for replacement of set point controllers, switchboard meters, other common size indicators.
The FLOWSIC600-XT measuring system works according to the principle of ultrasonic transit time difference measurement. This allows conclusions to be made on the gas volume flowing through based on the sound velocity transfer time. Measurement is carried out in a direct path layout to keep disturbing effects such as gas flow turbulence, dirt, moisture or interfering noises as low as possible. Two ultrasonic transducers are positioned opposite each other in a defined angle to the gas flow and operate alternately as sender and receiver.
One of the most widely used methods of monitoring and controlling liquid level in a tank is the use of Bubble Tubes with Pressure or Differential Pressure Transmitters. A small but uninterrupted flow of air or inert gas is forced down through a dip tube which extends to near the bottom of the tank. The back pressure of the introduced gas is a function of the liquid level or head in the tank.
Brooks Instrument manufactures an array of flow, pressure, vacuum and level products for dozens of industries from pharmaceuticals, oil and gas, fuel cell research and chemicals, to medical devices, analytical instrumentation, semiconductor manufacturing.
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
Parker Balston is a division of Parker Hannifin, world’s leading diversified manufacturer of motion and control technologies and systems. Balston manufacturers industrial filters and filtration technology, replacement filter elements, compressed air dryers, nitrogen generators, and compressed air microbial detection.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
Making the best instrument selection for a flow measurement application should include an assessment of what the operators really need in order to safely and effectively run the process or perform the task related to the measurement of fluid flow.
This document provides an overview and specifications for the Siemens LMV5 Burner Management System. It describes the base unit options, display options, actuator options, flame detector options and accessories, temperature and pressure sensor options, oxygen trim accessories, variable speed drive accessories, and general accessories. It also provides examples of typical BMS systems that would include components like the basic unit, display, actuators, flame scanner, temperature/pressure sensors, and transformers.
Habonim Valves & Actuators is a leading manufacturer of ball valves and pneumatic actuators with over 50 years' experience and a worldwide reputation for its high quality, innovation and engineering expertise. Habonim supplies a wide range of 3-piece and flanged ball valves, as well as tailor-made solutions, generating significant cost and space savings for its customers.
The two most important design innovations on the new FT4A are the new 2nd Generation DDCSensor™ and the expanded GasSelectX® gas selection menu.
Like all Fox meters, the rugged FT4A measures gas flow rate in standard units without the need for temperature or pressure compensation.
Magnetrol is a globally recognized manufacturer of level and flow measurement instrumentation and devices. Technologies include inferential and direct measurement.
See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Portable flow meter for measurement of compressed air, gases, and heat quanti...Classic Controls, Inc.
The FLUXUS G601 CA Energy is the ideal tool for carrying out complete energy efficiency tasks in the industry as well as within facility management by allowing the measurement of compressed air flow rates as well as the monitoring of thermal energy quantities and the flow rate determination of any kind of liquid or gaseous media with just one device.
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The AP pneumatic positioner from Kinetrol combines smooth and accurate mechanical positioning technology with convenient design features. It uses a proportional spool valve and force balance mechanism to precisely control actuators. The positioner is robust and adaptable, with options for high flow valves, housing styles, position monitoring, and I/P converters. It provides reliable, industrial-grade performance for process control applications.
The new PowerVUE™ design utilizes the same rugged Hagan actuator and frame construction, combined with the accuracy and reliability of the Fisher FieldVUE DVC6000 Digital Valve Controller. The pneumatic power positioner remains the most reliable and cost-effective method of actuation. Torque ranges are from 400 ft-lbs to 4,600 ft.-lbs.
The FLOWSIC600-XT measuring system works according to the principle of ultrasonic transit time difference measurement. This allows conclusions to be made on the gas volume flowing through based on the sound velocity transfer time. Measurement is carried out in a direct path layout to keep disturbing effects such as gas flow turbulence, dirt, moisture or interfering noises as low as possible. Two ultrasonic transducers are positioned opposite each other in a defined angle to the gas flow and operate alternately as sender and receiver.
One of the most widely used methods of monitoring and controlling liquid level in a tank is the use of Bubble Tubes with Pressure or Differential Pressure Transmitters. A small but uninterrupted flow of air or inert gas is forced down through a dip tube which extends to near the bottom of the tank. The back pressure of the introduced gas is a function of the liquid level or head in the tank.
Brooks Instrument manufactures an array of flow, pressure, vacuum and level products for dozens of industries from pharmaceuticals, oil and gas, fuel cell research and chemicals, to medical devices, analytical instrumentation, semiconductor manufacturing.
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
Parker Balston is a division of Parker Hannifin, world’s leading diversified manufacturer of motion and control technologies and systems. Balston manufacturers industrial filters and filtration technology, replacement filter elements, compressed air dryers, nitrogen generators, and compressed air microbial detection.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
Making the best instrument selection for a flow measurement application should include an assessment of what the operators really need in order to safely and effectively run the process or perform the task related to the measurement of fluid flow.
This document provides an overview and specifications for the Siemens LMV5 Burner Management System. It describes the base unit options, display options, actuator options, flame detector options and accessories, temperature and pressure sensor options, oxygen trim accessories, variable speed drive accessories, and general accessories. It also provides examples of typical BMS systems that would include components like the basic unit, display, actuators, flame scanner, temperature/pressure sensors, and transformers.
Habonim Valves & Actuators is a leading manufacturer of ball valves and pneumatic actuators with over 50 years' experience and a worldwide reputation for its high quality, innovation and engineering expertise. Habonim supplies a wide range of 3-piece and flanged ball valves, as well as tailor-made solutions, generating significant cost and space savings for its customers.
The two most important design innovations on the new FT4A are the new 2nd Generation DDCSensor™ and the expanded GasSelectX® gas selection menu.
Like all Fox meters, the rugged FT4A measures gas flow rate in standard units without the need for temperature or pressure compensation.
Magnetrol is a globally recognized manufacturer of level and flow measurement instrumentation and devices. Technologies include inferential and direct measurement.
See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Portable flow meter for measurement of compressed air, gases, and heat quanti...Classic Controls, Inc.
The FLUXUS G601 CA Energy is the ideal tool for carrying out complete energy efficiency tasks in the industry as well as within facility management by allowing the measurement of compressed air flow rates as well as the monitoring of thermal energy quantities and the flow rate determination of any kind of liquid or gaseous media with just one device.
Datasheet Fluke 7380A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Automated Temperature Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The AP pneumatic positioner from Kinetrol combines smooth and accurate mechanical positioning technology with convenient design features. It uses a proportional spool valve and force balance mechanism to precisely control actuators. The positioner is robust and adaptable, with options for high flow valves, housing styles, position monitoring, and I/P converters. It provides reliable, industrial-grade performance for process control applications.
The new PowerVUE™ design utilizes the same rugged Hagan actuator and frame construction, combined with the accuracy and reliability of the Fisher FieldVUE DVC6000 Digital Valve Controller. The pneumatic power positioner remains the most reliable and cost-effective method of actuation. Torque ranges are from 400 ft-lbs to 4,600 ft.-lbs.
The document provides a 10-step method for selecting an actuator for damper retrofit applications. It includes tables to help determine the necessary actuator specifications based on the damper size, type, torque requirements, control inputs, and other application details. An example calculation is also provided to demonstrate how to size an actuator for a specific damper retrofit project.
The document summarizes Valtek Beta positioners, which are single or double-acting, force-balanced instruments that provide fast, sensitive, and accurate positioning of diaphragm or cylinder actuators. They are available with either pneumatic or electro-pneumatic modules. Key features include interchangeable modules, corrosion resistance, independent zero and span settings, field reversibility, split ranges, and easy calibration. The positioners use feedback to balance forces proportional to the input signal and valve position.
This document provides information about various position controller models that can be used with RCP3/RCP2 series actuators. It describes the six main controller types (C, CG, CF, CY, PL, PO, SE), their specifications and compatible actuators. The C/CG type is the basic positioner controller, the CY type is for solenoid valve control, the PL/PO type allows pulse train control, and the SE type enables serial communication. It also outlines the different control functions and I/O signal capabilities of each controller type.
This document provides information on the ACON position controller models C/CG/CY/PL/PO/SE. It lists the 5 controller types and their functions. The C/CG types are positioner controllers that can control up to 512 positioning points. The CY type controls solenoid valves. The PL/PO types use pulse train control. The SE type uses serial communication. Peripheral devices, cables, and the I/O specifications are also described.
The SRD991 intelligent positioner can operate pneumatic valve actuators and is available with different communication protocols or without communication. It features auto-start calibration, self-diagnostics, a multi-lingual LCD interface, and optional pressure sensors and input/output modules. Accessories include manifolds, boosters, and mounting kits to interface with various actuator types.
Merlin Marine Test Equipment provides equipment for testing and repairing diesel fuel injection systems. This includes fuel pump test stands, camboxes, calibration rigs, injector testers, and an ultrasonic cleaning tank. The document provides details on the DC 80-EM fuel pump test stand which is designed for calibrating large single cylinder fuel pumps. It also describes the S400-M injector tester used for testing injectors and the Autolap 200 nozzle lapping machine used for reconditioning injector nozzles.
This document provides information on the RCP2CR-GRLS Cleanroom ROBO Cylinder 2-Finger Gripper Mini Lever Type 42mm Width, including its specifications, compatible controllers, cable options, and dimensions. It can adjust its gripping force from 20-70% of current limits. It has a stroke of 30 degrees and maximum gripping force of 6.4N. Compatible controllers include the PMEC-C-20PI-NP-2-1 easy to use solenoid valve type and PCON-C-20PI-NP-2-0 positioning type.
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
Type K Linear and Rotary Damper Actuators - RotorkCTi Controltech
The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. The damper drives are available in a wide range of configurations to meet the challenges of industrial applications. Some key features:
- A series offering drop-in-place retrofit, requiring no field engineering or fabrication.
- Improved reliability in high temperature environments
- Rated for 100% duty-cycle, continuous modulating service
- Highly accurate to 0.25% resolution
- Discrete contacts (O/C) and pneumatic, analog or bus network (MOD) communications
A rugged, corrosion-resistant pneumatic vane actuator with only a single moving part, the Kinetrol vane actuator is warranted to operate trouble-free for four million cycles.
This is the Kinetrol Vane Actuator general product catalog, which includes pneumatic actuators, spring return units, positioners, indicators, limit switches, solenoid valves, and other valve actuation equipment.
The document provides specifications for the RCP2W-RA4C ROBO Cylinder. It includes details on the actuator such as its speed and load capacity graphs, dimensions and weights by stroke, compatible controllers, and configuration name breakdown. The actuator uses a pulse motor, ball screw drive system, and has an IP65 splash-proof protection structure for use between 0-40°C and 85% humidity. It can operate with compatible mini or standard controllers from the manufacturer.
This document provides specifications for the RCP2-GR3LS ROBO Cylinder 3-Finger Gripper Lever Type including:
1. Key specifications like a stroke of 19 degrees, maximum gripping force of 200N, and compatible controllers.
2. A graph showing how gripping force varies with current limit from 0-70%.
3. Dimensions and mounting information for the actuator.
4. An overview of compatible simple and programmable motion controllers for the RCP2 series actuators.
10 - Ac Power Regulators & Control Power Transformers - Fuji ElectricCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - 10 - Ac Power Regulators & Control Power Transformers
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
This document contains the technical manual for split-type air conditioners. It includes 11 sections that cover: 1) part names and functions, 2) specifications, 3) data, 4) outlines and dimensions, 5) wiring diagrams, 6) refrigerant system diagrams, 7) troubleshooting, 8) function setting, 9) system control, 10) service data (parts name), and 11) optional parts. The manual provides specifications, performance data, diagrams, troubleshooting information, and other technical details for properly servicing the air conditioner units.
The document provides specifications for the RCP2 ROBO Cylinder actuator. It includes details on:
1) The load capacity decreases at higher speeds due to the pulse motor characteristics, with load capacity vs speed graphs provided.
2) The maximum stroke and speed supported depends on the lead and model, with an actuator specification table listing these details.
3) Additional information is given on dimensions, weight by stroke, compatible controllers, and technical references.
(1) The RCP2 ROBO Cylinder rotary actuator uses a pulse motor with varying output torque and allowable moment of inertia based on rotational speed.
(2) It can rotate 330 or 360 degrees depending on the model, with a maximum rated acceleration of 0.3G.
(3) The document provides specifications, diagrams, compatible controller options and other details about the actuator.
Kinetrol Rotary Actuator Catalog March 2018Kinetrol USA
Kinetrol rotary actuators used for operation or positioning of ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
Most recent version of Kinetrol catalog including Blueline coating for foodservice applications. Kinetrol rotary vane actuators are used to operate or position ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
Similar to Rosemount Analytical Hagan Pneumatic Power Positioners (20)
PID is short for "proportional plus integral and derivative control", the three actions used in managing a control loop. Process loop controllers use one, two or all three of these to optimally control the process system. PID control is used in a wide variety of applications in industrial control and process system management.
Courtesy of Eurotherm. Eurotherm offers a wide range of single & multi-loop PID controllers.
Smokeless Flares
Smokeless flares incinerate flammable hazardous vent gas with the assistance of supplemental high-velocity air or steam to prevent the formation of soot or smoke. Excessive injection of air or steam reduces combustion efficiency, resulting in the release of hazardous VOC gases. Meanwhile, inadequate injection of air or steam results in the formation of undesirable soot and smoke. Although modern flares are designed for high flow rates associated with an emergency condition, they most commonly operate at high-turn-down, low-flow rates, making it challenging for the flare to operate at optimal combustion efficiency.
Pilot Monitor
Flammable vent gases are ignited by a pilot flame when released into the atmosphere by refineries, natural gas processing plants, and petrochemical plants. The proper incineration of these gases is a critical safety and environmental concern. Therefore, it is essential to confirm that the pilot is lit at all times. Monitoring via a thermocouple is common, however, failures frequently occur and replacements can require costly process shutdowns. Remote sensing IR technology (PM) is the superior alternative.
Flame Intensity Monitors
Williamson Flame Intensity Monitors (FI) are the single-wavelength sensors of choice for a variety of flare applications where the more sophisticated dual-wavelength flare products are not appropriate or are not required.
Some materials can be difficult or near impossible to measure with precision using single-wavelength or ratio pyrometers because of their complex emissivity characteristics. These types of materials are called non-greybody materials and their emissivity varies with wavelength.
Multi-wavelength pyrometers use application specific algorithms to characterize infrared energy and emissivity across the measured wavelengths to accurately calculate both the actual temperature and emissivity of these complex non-greybody materials.
The 3000 series gives you high accuracy, fast response time and low temperature drift – without compromise. All 6 mm devices can be mounted on a standard DIN rail or power rail with no air gap separation.
Bronkhorst has over 35 years experience in designing and manufacturing precise and reliable measurement and control equipment and the widest range of mass flow and pressure meters and controllers available on the market.
Bronkhorst offers innovative solutions for many different applications across a great many different markets, and has a particular strong wealth of knowledge and reputation within the plastics and rubber market.
The document provides information on the Tek-Cor 1100A series Coriolis mass flowmeters from Tek-Trol, including their measuring principle, configurations (U-shaped, micro-bend shaped, and triangle shaped), transmitter, benefits, applications, dimensional drawings, specifications, flow ranges, and installation guidelines. The Coriolis mass flowmeters directly measure the mass of fluids flowing through oscillating tubes to provide accurate flow, density, and other measurements regardless of temperature and pressure factors that impact volumetric flow.
AP Tech is a manufacturer of gas handling components – primarily pressure regulators and valves. AP Tech’s competitive advantage are products that deliver specialty gases for high purity through ultra high purity applications. Starting from the source vessel to point of use and into the process tool or equipment itself, AP Tech products are known to deliver gases with uncompromising quality, performance and reliability.
The L100 Bubble-Tube Level System is a fully self contained instrument, requiring only connections to air or gas supply, dip tube and electrical power source to provide precise level indication. Because only the stationary dip tube and the purge gas come in contact with the liquid, this system is ideal for applications involving hazardous locations or liquids which are highly corrosive, viscous, hot, (molten metal), explosive, slurry type or foodstuff.
For applications where rapid transition from open to closed positions is warranted, the Mark 76 is a solid choice. Designed with a short stroke and straight through fluid path, the Mark 76 also incorporates other features to assure good service for process operations using on/off control.
Tek-Trol provides process measurement and control products for Flow, Level, Temperature and Pressure measurement and Control Valves and Analyzers systems for the Process, Power and Oil and Gas Industries.
EL-FLOW Prestige is the next generation of Bronkhorst Mass Flow Meters / Controllers for gases. Nearly all core components have been redesigned and many improvements and innovations have been incorporated. With this new series Bronkhorst introduced the “Differential Temperature Balancing” technology, ensuring a superb sensor stability.
Each ReFlexIO unit allows you to connect (2) Analog Inputs and (2) Digital Inputs which are wirelessly transferred to (2) Analog Outputs and (2) Digital Outputs on the other end. The 2 ReFlexIO 'paired' units work bi-directionally, so it's possible, for example, to turn on a relay (digital input to digital output on the other end) and get a signal back (digital input to sense replay closure returned to digital output on the original sending unit) to turn on a light telling you that the relay is indeed on.
The T2750 PAC hardware provides high-performance control with cost-effective redundancy options in a versatile modular system. Powerful instruments, the control units, and the I/O system form the basis of a complete distributed control and recording environment. This environment is capable of continuous analog, logic, sequential control, batch management, secure data recording at point of measurement, and setpoint programming.
The T2550 PAC is a high performance solution offering extremely cost effective redundancy options - making high availability viable for more of your process.
The control unit and I/O system form the basis of a complete distributed control and recording environment capable of continuous analog, logic and sequential control combined with secure data recording at point of measurement - all designed to maximize Return on Investment (ROI) from your process.
ControlAir Inc. is a leading manufacturer of precision air pressure regulators, I/P transducers, E/P transducers, P/I transducers, valve positioners, air relays, volume boosters, air filter regulators and frictionless diaphragm air cylinders.
The LowFlow JRDL Series line of diaphragm sensed, high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for general, corrosive and specialty gas and liquid service. Typical applications include gas chromatography and flame ionization detectors, as well as other industrial controls.
The Model TCL measures total chlorine in water, and is ideal for seawater chlorine analysis applications. The system consists of a sample conditioning unit, a sensor, and transmitter
The EL2200 series of electromagnetic flowmeters represent the state of the art for the accurate measurement for water cycle and process applications. This new generation flowmeter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flowmeter with an extremely wide measurement range. The new EL Series meters are capable of a measurement range up to 1000:1.
Advanced Cooling Technologies, manufacturer of specialized heat transfer equipment including heat pipes and industrial enclosure coolers, collaborated with a local children's science museum to produce a hands on learning exhibit. The exhibit illustrates principals of heat transfer.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Literature Review Basics and Understanding Reference Management.pptx
Rosemount Analytical Hagan Pneumatic Power Positioners
1. Rosemount Analytical Pneumatic Power
Positioners
PRODUCT DESCRIPTION
Industry needs muscle to control process valves, dampers
and feed mechanisms accurately and in response to a
demand signal. Emerson’s Rosemount Analytical
pneumatic power positioners have been satisfying these
exacting control requirements for many years in countless
applications – from steel mills to refineries – where
positioning speed and accuracy are taken for granted.
Rosemount Analytical power positioners are manufactured
in cylinder sizes from 2-1/2 to 8 inches in diameter with
strokes of 5 to 14 inches. They come in thrust and torque
models for wall, swivel or floor mounting and with acces-
sories such as limit switches, position transmitters, heated
enclosures, air failure lock and characterized cams that
provide an output motion that is a function of the input
signal.
The miniature 2-1/2 x 5 positioner is so compact that 24 to
48 of these units are often used to control secondary air
on one boiler.
FEATURES
• True Positioning Devices – All power positioners assume
a definite position of the crosshead or operating lever for
each demand signal variation through the action of an
integral feedback mechanism.
• Mounting Variety – Models are available for convenient
wall, swivel, or floor mounting. These positioners are
often mounted directly on lever type valves by the valve
manufacturer.
• Characterized Positioner – All positioners are equipped
with a standard rotary cam or cam bar which produces a
straight line relationship between input signal and output
motion. Square or square root and blank cams are
available.
• Air Lock – Designated models are equipped with an
internal locking mechanism which stops and locks the
positioner in the control position existing at the moment
of air supply failure until air pressure is restored.
System air locking schemes are also available.
• Fail Safe – Designated models can be equipped to drive
the positioner to full open or full closed in case of air
supply failure. NOTE: This feature should not be used
with the air lock feature.
Visit our website at www.raihome.com
On-line ordering available.
Product Data Sheet
PDS 102-201.A01
June, 2007
• Manual Operators – All torque type positioners are
equipped with either a manual operating lever or a
manual operating handwheel.
• Ambient Temperature – Positioners are generally
suitable for operation from 0 to 140°F (-17,8 to 60°C)
with a maximum rating of 300°F (149°C) for certain high
temperature models.
• Dust Cover and Internal Heater – A dust cover is
provided with or without heater and thermostat for
certain torque type models.
• Limit Switches and Position Transmitters – Limit
switches and position transmitters are available on
designated models.
• Power Air Supply – Clean dry instrument air at 45 to 120
psig is required for cylinders of 8 inch diameter or less.
For cylinders over 8 inches in diameter, the maximum air
pressure for standard service is 100 psig and 250 psig
for heavy duty service.
BENEFITS
• Accuracy
• Reliability
• Simple maintenance because of rugged frame
construction
• Efficient torque and power at a minimum cost
• Fast response to small input signal changes due to high
internal gain
2. OPERATION
Non-characterized (spring) feedback produces a straight
line (1:1) relationship between the input signal and output
response.
The linear shape produces a straight line (1:1)
relationship between the input signal and output
response.
The square (x2
) shape will produce a small output change
for large input changes during the lower portion of the
signal range. When operating in the upper portion of the
signal range, a small input change will be required to
produce a large output change.
Conversely, the square-root (√ x) shape will produce a
relatively large output change for small input changes
during approximately the first 10% of signal range. When
operating in the upper portion of the signal range, a large
input change will be required to produce a small output
change.
Characterized (cam) feedback provides choice of linear/
square or square root characteristic for more versatility
and better zeroing ability.
Note: Stall torques and thrusts are noted in the specifications.
Rosemount Analytical recommends oversizing actuators by
40 percent above force required to ensure responsive operation.
Input-Output Characteristics
Page 2
Square (x2
)
Square Root (√ x)
3. Thrust Type Swivel Mounted Positioner
2 1/2 X 5 THRUST TYPE SWIVEL MOUNTED SPECIFICATIONS 1
Accuracy: ± 1% of full scale
Temperature limits: 0° to 170°F (-17,8° to 77°C)
Full stroke time: 2 sec. or less
Hysteresis: ± 0.8% of full scale
Input signal range: 3-15, 3-27, 0-30,
0-60 psig (21-103, 21-186,
0-207, 0-414 kPa gauge),
and 4-20 mA
Air supply
Maximum: 120 psig (827 kPa gauge)
Minimum: 45 psig (310 kPa gauge)
Recommended: 100 psig (689 kPa gauge)
Thrust and load data
Stall thrust: 500 lbs. (228 kg)
Maximum
friction load: 125 lbs. (57 kg)
Maximum allowable
weight load: 175 lbs. (79 kg)
Positioning accuracy
with 3-27 psi control
signal: 1%
Air consumption: 0.5 scfm free air
Air filter, style
4505C21G03: sufficient capacity for 12
positioners 2
OPTIONS
Fail safe (loss of power air) Pivot base
I/P signal convertor Anchor pivot pin for CE
Dual limit switches
ACCESSORIES
Clevis, clevis pin and retaining rings are included. An air
filter regulator is required but is not included.
Speed-Thrust Curve
Drawings are for reference purposes only and Emerson does not warrant the accuracy of the dimensions herein.
1
Specifications are subject to change without notification. Our policy is one of continuous improvement, and we reserve the right to change
specifications.
2
Two air filter regulators, Style 45D5C21G03, in parallel are required for 12 positioners.
Page 3
4. 2 1/2 X 5 THRUST TYPE SWIVEL MOUNTED ORDERING INFORMATION
PP205 Pneumatic Power Positioner 2-1/2 x 5 Thrust Type Shipping Weight: 9 lbs. (20 kg)
Code Single Range/Electric Position Transmitter
1 3-15 PSI signal
3 3-27 PSI signal
5 0-30 PSI signal
7 On/off operation 1
Code Limit Switches
0 None
1 2 limit switches provided 2
Code I/P Transmitter for accepting 4-20 mA Control Signal
0 None
1 Provided (unmounted)
Code Mounting
1 Standard swivel base
2 VeriTrim mounting
PP205 2 1 0 1 EXAMPLE
Clevis, clevis pin and retaining rings are integral and are included. Instruction Manual IB 102-202N is included. Air filter
4505C21G03 should be ordered with positioner (see Accessory List below).
NOTES:
1
Solenoid for on/off operation is dual coil 120 VAC.
2
Limit switches are only adjustable 0-5% on closed end, and 95-100% on open end.
3
For Trunnion mounted version, consult factory.
Code Description
4505C21G03 Air filter/regulator – recommended
371763 Pivot base and pin
271638 Anchor pivot pin for CE boilers (separated overfire air) 3
3D37449G01 Fail-safe – 0% or 100% of travel initiated upon loss of power air, I/P included. 3-15 PSI control
signals, only
3D39395G07 Maintenance tool kit
Paint – Rosemount blue
ACCESSORIES
Rating for Limit Switches – SPDT
125 volts ac 15 amps
250 volts ac 15 amps
480 volts ac 15 amps
150 volts dc 0.5 amps
250 volts dc 0.25 amps
Page 4
Consult factory for ordering information.
5. Repeatability: 1.0% of full stroke
Temperature limit: 40-170°F (4-77°C)
Full stroke time (unloaded): 2 seconds or less
Air supply
Maximum: 120 psi (827 kPa)
Minimum: 45 psi (310 kPa)
Recommended: 100 psi (689 kPa)
Air consumption: 0.4 scfm (free air)
Torque load data based on recommended air supply
Stall torque (2-1/2 x 5): 120 ft.-lbs. (162 N.m)
Stall torque (4x5): 240 ft.-lbs. (325 N.m)
Maximum friction load: 30 ft.-lbs. (41 N.m)
Maximum allowable
weight load: 45 ft.-lbs. (61 N.m)
Input signal: 3-15, 3-27, 0-30 psi
(21-103, 21-186, 0-207
kPa), and 4-20 mA
Output shaft angle: 80°
Unit weight: 60 lbs. (27 kg)
OPTIONS ACCESSORIES
Characterized or non- Air filter regulator is
characterized positioning included
Manual brake Clevis and pin are included
Supply air release
SPDT limit switches
Heater and thermostat
Electric position transmitter
Air lock
Fail safe
I/P signal convertor
Large cylinder for plant air supply below 100 psig
(689 kPa)
This positioner was designed to accommodate low
torque applications (below 90 ft.-lb.) (122 N.m) such as
small packaged boilers, butterfly valves, jackshafts, fired
heaters, etc. For applications requiring up to 180 foot
pounds (244 N.m) a 4 x 5 cylinder is available.
Page 5
2 1/2 X 5; 4 X 5 ECONO TORQUE TYPE
FLOOR MOUNTED SPECIFICATIONS 1
Dimensions in inches with
millimeters in parentheses
Drawings are for reference purposes only and Emerson
does not warrant the accuracy of the dimensions herein.
1
Specifications are subject to change without
notification. Our policy is one of continuous
improvement, and we reserve the right to change
specifications.
Outline and Mounting Dimensions
6. Page 6
• Select complete model number from model number matrix Shp. Wt.
lbs./kgs.
Pneumatic Power Positioner Econo Torque Type 80/33
Includes air filter/regular style 4505C21G03 and Clevis, style 174469
Code Positioner Type
1 Non-characterized
2 Characterized
Code Positioner Size
1 2.5 x 5 cylinder
2 4 x 5 cylinder 1
Code Signal Range
1 3 – 15 psig (21–103 kPa) 4/1,8
2 3 – 27 psig (21–186 kPa) 4/1,8
3 0 – 30 psig (0 – 207 kPa) 4/1,8
4 4 – 20 mA (I/P mounted and piped) 9/4,1
Code Manual and Lock Operation
0 None
1 Manual operator
2 Manual operator and manual lock
3 Manual operator, manual lock and soft air lock 2
4 Manual operator, manual lock and fail safe 3
10/4,5
Code Limit Switches (SPDT) 4
1 None
2 Two switches 4/1,8
4 Two switches and electric position transmitter (EPT) 5
8/3,6
Code Heater and Thermostat
0 None
1 150 watt (AC) heater
PP075T 1 2 3 1 2 1 EXAMPLE 80/33
1
Recommended to provide 180 foot pounds (244 N m) torque if plant air supply is 100 psig (689 kPa) or 90 foot pounds (122 N m) with 50
psig (345 kPa) air supply.
2
Soft air lock is accomplished by trapping air in the cylinder – it is not a mechanical lock.
3
Assembled to fail open (piston extended 100%) on loss of power air supply.
4
SPDT wwitch ratings 15 Amps, 125, 250, or 480 VAC; 10 Amps, 125 VAC, "L" (Tungsten Lamp) 1 HP, 125 VAC; 2 HP, 250 VAC 1/2 amp,
125 VDC, 1/4 amp, 250 VDC.
5
Two wire (24 VDC) 4 – 20 mA transmitter, not for intrinsically safe applications.
2 1/2 X 5; 4 X 5 ECONO TORQUE TYPE FLOOR MOUNTED ORDERING INFORMATION
Consult factory for ordering information.
7. Page 7
OPTIONS
Fail safe (loss of power air)
I/P signal convertor
ACCESSORIES
Clevis, clevis pin and retaining rings are included.
An air filter is required but not included.
Accuracy: ±1% of full scale
Temperature limits: 0-170°F (-17, 8-77°C)
Full stroke time: 2 sec or less
Air supply
Maximum: 125 psig (862 kPa)
Minimum: 45 psig (310 kPa)
Recommended: 100 psig (689 kPa)
Built-in lock: Prevents shipping
damage
Thrust and load data
Stall thrust: 1200 lbs. (545 kg)
Maximum friction load: 300 lbs. (136 kg)
Maximum allowable
weight load: 400 lbs. (136 kg)
Input signal range: See table
Air consumption: 0.5 scfm free air
An anchor pivot pin is not available as for the 2-1/2 x 5
Swivel Type Positioner
Two air filters/regulators, Style 45D5C21G03, in
parallel are required for 12 positioners.
To Order, Specify:
1. Style number.
2. Pivot base and pin, if required.
Thrust Type Swivel
Mounted Positioner
Pivot Base
Alignment
Positioner
Drawings are for reference purposes only and Emerson does not warrant the accuracy of the dimensions herein.
1
Specifications are subject to change without notification. Our policy is one of continuous improvement, and we reserve the right to change specifications.
Speed-Thrust Curve
4 X 5 THRUST TYPE SWIVEL MOUNTED SPECIFICATIONS 1
8. Page 8
Clevis, clevis pin and retaining rings are integral and are included. Air filter/reg. 4505C21G03 should be ordered with
positioner (See Accessory List below).
Signal Range Ship Weight
Code psig N.m Current lbs./kgs.
3D39491G01 0 – 30/0-207 30/13,6
3D39491G02 3 – 15/21-103 30/13,6
3D39491G03 3 – 27/21-186 30/13,6
3D39491G02 (requires I/P parts, see note 1
below) 4 – 20 30/13,6
Accessories
Ship Weight
Code lbs./kgs.
371763 Pivot base and pin 3/1,4
3D37449G01 Fail-safe 2
15/6,8
4505C21G03 Air filter 1/0,5
1
Order Parts 9885A31H01, 275431-007, 4505C21G01 (these parts remote mounted)
2
Actuated on loss of power air only
4 X 5 THRUST TYPE SWIVEL MOUNTED ORDERING INFORMATION
Consult factory for ordering information.
9. Page 9
OPTIONS
Heater and thermostat
Air lock and positive mechanical lock
Manual lock
Limit switches – standard or heavy duty
Minimum stop
Fail safe
I/P signal convertor
ACCESSORIES
Filter regulator is included
Clevis and pin are included
Drawings are for reference purposes only and
Emerson does not warrant the accuracy of the
dimensions herein.
1
Specifications are subject to change without notification. Our
policy is one of continuous improvement, and we reserve the
right to change specifications.
SPECIFICATIONS
SIGNAL REQUIREMENTS
Inputs
Direct: 3-15/0-30 psig (21-103/0-207 kPa)
and 4-20 mA signal
Inverse: 15-3/30-0 psig (103-21/207-0 kPa)
PERFORMANCE
Repeatability: 1-0% of full stroke
No load full stroke time: 3 sec.
Full stroke time with 240
ft.-lbs. (325 N.m) torque: 6 sec.
Stall torque: 400 ft.-lbs. (542 N.m) with
100 psig (689 kPa) air supply
Maximum friction load: 50% of control torque
Maximum weight load: 140 ft.-lbs. (189 N.m)
Maximum allowable
cylinder air pressure: 120 psig (827 kPa)
Power air consumption: 0.5 scfm
Stroke length: 5 in. (127 mm) (80° rotation)
PHYSICAL CHARACTERISTICS
Weight: 80 lbs. (36 kg), typical
Air supply and signal
air input fittings: 1/4 inch NPT female connections
Electrical connections: 16 gauge pigtail leads
ENVIRONMENTAL REQUIREMENTS
Ambient temperature
Without heater: +40°F to + 140°F (4,44°C to 60°C)
With heater: -10°F to + 140°F (-23,3°C to 60°C)
Relative humidity: operable up to 100% RH
4 X 5 TORQUE TYPE FLOOR MOUNTED SPECIFICATIONS 1
The Rosemount Analytical 4 x 5 Torque Type Power
Positioner accepts standard pneumatic signal ranges
and produces a 0 to 80° proportional shaft rotation. The
options available include analog position transmission
and/or contact closure for remote use, and position lock
up on power air supply failure.
Dimensions in Inches with
millimeters in parenthesesGeneral Outline Drawing
10. Page 10
POWERSUPPLYREQUIREMENTS
Pneumatic
Operating air supply pressure: 45 to 120 psig
(310 to 827 kPa)
Recommended air supply pressure: 100 psig (689 kPa)
Electrical
Pivot valve heater
Voltage: 117 VAC, 60 Hz
Power consumption: 150 watts
RATING FOR LIMIT SWITCHES
Standard switch SPDT 125 volts AC: 15 amps
Heavy-duty switch SPDT 120 volts AC: 20 amps
24 VDC power supply required for position transmitter.
Switches suitable for 100% adjustment.
Field wiring direct to switches (not by Emerson).
4 X 5 TORQUE TYPE FLOOR MOUNTED ORDERING INFORMATION
• Select complete model number from Model Number Matrix Ship Weight
lbs./kgs.
Pneumatic Power Positioner 4 x 5 Torque Type 95/43
Includes air filter/regular style 4505C21G03 and Clevis, style 174469
Code Frame Description
1 Standard/brass conns
2 Manual lock/brass conns 8/3,6
3 Air lock/brass conns 12/5,5
4 Standard/stainless steel conns
5 Manual lock/stainless steel conns 8/3,6
6 Air lock/stainless steel conns 12/5,5
Code Signal Range
1 3 – 15 psig (21-103 kPa)
2 0 – 30 psig (0-207 kPa)
3 4 – 20 mA (I/P mounted and piped) 4/1,8
Code Cam Selection
1 Linear standard rotation
2 Linear rev. rotation
3 Square root standard rotation – direct system
4 Square root rev. rotation – direct system
5 Square root standard rotation – inverse system
6 Square root rev. rotation – inverse system
Code Limit Switch
0 None
2 Standard limit switch 2 – SPDT 1
2/0,9
3 H. D. limit switch 2 – 2 DPDT 6/2,7
4 Standard limit switch and EPT 6/2,7
5 H. D. limit switch and EPT 10/4,5
Code Heater
0 None
1 117 VAC, 150 watt heater 2/0,9
Code Minimum Limit Stop
0 None
1 Limit stop feature
PP405TR 1 2 2 1 1 1 EXAMPLE 95/43
Accessories
Code
3D37097 On-Off
2
Two wire (24 VDC) 4 – 20 mA transmitter mounted under power
positioner cover, not for intrinsically safe applications.
1
SPDT Switch Ratings
15 Amps, 125, 250 or 480 VAC;
10 Amps, 125 VAC "L" (Tungsten Lamp)
1 Hp, 125 VAC; 2 Hp, 250 VAC
1/2 Amp, 125 VDC, 1/4 Amp, 250 VDC
4 X 5 TORQUE TYPE FLOOR MOUNTED SPECIFICATIONS (continued)
Consult factory for ordering information.
11. Page 11
6 x 10 Floor Mounted Positioner
Limit Switches
Limit switches are of the single pole, double throw, non-
explosion proof. Ratings are 125 VAC–15 amperes,
125 VDC – 0.5 ampere.
Cam Bar
The standard cam bar produces a straight line relationship.
Shaping the cam bar in the field produces other
relationships.
Standard rotation (as supplied) – lever moves
counterclockwise with increased loading pressure.
Reverse rotation – lever moves clockwise with increased
loading pressure when valve block and angling bar are
reversed.
Operating lever shown with piston at midstroke position.
Lever may be installed at 7-1/2 inch (191 mm) ncrements
on a 2 inch (51 mm) dia. 48 tooth shaft from position shown.
To Order, Specify:
1. Positioner style number.
2. Accessory style number.
3. Desired input signal [3-15, 0-30 psig (21-103, 0-207 kPa)]
or 4-20 mA.
Repeatability: 1% of full stroke or better
Temperature limits: 0-140°F (-17,8 -60°C),
160°(71°C) with increased
maintenance
Full stroke time (unloaded): 5 sec or less
Input signal ranges: 3-15, 0-30 psig (21-103,
0-207 kPa), and 4-20 mA
Air supply:
Maximum: 120 psig (827 kPa)
Minimum: 45 psig (310 kPa)
Recommended: 100 psig (689 kPa)
Air consumption: 1 scfm free air
10-inch stroke: (80° rotation)
Torque and load data
Stall torque: 1800 ft.-lbs. (2441 N.m)
Maximum friction load: 450 ft.-lbs. (610 N.m)
Minimum allowable
weight load: 600 ft.-lbs. (814 N.m)
Physical Characteristics
Weight: 275 lbs. (125 kg), typical
Air supply and signal
Air input fittings: 1/4 inch NPT female
connections
Electrical connections: 16 gauge pigtail leads
Drawings are for reference purposes only and Emerson
does not warrant the accuracy of the dimensions herein.
1
Specifications are subject to change without notification. Our policy is
one of continuous improvement, and we reserve the right to change
specifications.
OPTIONS ACCESSORIES
Manual operator Air filter is included
Air lock Clevis and pin are included
I/P convertor
Dual limit switches
Heater
Minimum limit stop
6 X 10 TORQUE TYPE FLOOR MOUNTED SPECIFICATIONS 1
Dimensions in Inches with
millimeters in parentheses
12. Page 12
6 X 10 TORQUE TYPE FLOOR MOUNTED ORDERING INFORMATION
Limit switches, EPT and manual limit stop dependent on type codes 1, 2, 3, 4 and 5 as below:
1
For type codes 11, 12, 21, 31, 41, 42, 51 and 61
2
For type codes 22 and 52
3
For type codes 32 and 62
4
For type codes 21, 31, 51 and 61
5
For type codes 11, 12, 22, 32, 41, 42, 52 and 62
6
SPDT switch ratings
15 amps, 125, 250 or 480 VAC;
10 amps, 125 VAC "L" (tungsten lamp)
1 Hp, 125 VAC; 2 Hp, 250 VAC
1/2 amp, 125 VDC, 1/4 Amp, 250 VDC
• Select complete model number from Model Number Matrix
Ship Wt.
lbs./kgs.
Pneumatic Power Positioner 6 x 10 Torque Type 300/136
Includes air filter style 372538-002 and clevis, style 174468-001
Code Frame Description
1 Standard/brass conns
2 Manual lock/brass conns 8/3,6
3 Manual and air lock/brass conns 12/5,5
4 Standard/stainless steel conns
5 Manual lock/stainless steel conns 8/3,6
6 Manual and air lock/stainless steel conns 12/5,5
Code Drive Shaft Assembly
1 Right hand drive
2 Left hand drive
Code Signal Range
1 3 – 15 psig (21-103 kPa)
2 0 – 30 psig (0-207 kPa)
3 4 – 20 mA (I/P mounted and piped) 4/1,8
Code Limit Switch (Selection Based on Type)
0 None
1 6
Two standard 1
2/0,9
2 6
Two standard 2
2/0,9
3 6
Two standard 3
2/0,9
4 Two heavy duty 1
6/2,7
5 Two heavy duty 2
6/2,7
6 Two heavy duty 3
6/2,7
Code Heater
0 None
1 117 VAC, 150 watt heater 2/0,9
Code Miscellaneous Accessories
(Selection based on type)
0 None
5 Minimum limit stop
PP610TR 1 2 3 0 0 1 EXAMPLE 300/136
Consult factory for ordering information.
13. Page 13
8 x 14 Floor Mounted Positioner
OPTIONS
Manual operator
Air lock
Dust cover
Heater
I/P convertor
Position transmitter
Fail safe
Dual limit switches
Dual heavy-duty limit switches
Potentiometer (retransmitting slideware)
Master/slave positioner
ACCESSORIES
Air filter is included
Clevis and pin are included
For styles 452593, 443700, and 457031:
473662-001 ... 1 AC Switch
473662-002 ... 2 AC Switches
473662-003 ... Pot only
473662-004 ... 1 AC Switch and 1 Pot
473662-005 ... 2 AC Switches and 1 Pot
473662-006 ... 1 DC Switch
473662-007 ... 2 DC Switches
473662-008 ... 1 DC Switch and 1 Pot
473662-009 ... 2 DC Switches and 1 Pot
Repeatability: 1% of full stroke or better
Temperature limits: 0-140°F (-17,8 -60°C),
160°F (71°C) with
increased maintenance
Full stroke time (unloaded): 2.5 sec
Air supply:
Maximum: 120 psig (827 kPa)
Minimum: 45 psig (20 kPa)
Recommended: 100 psig (689 kPa)
Air consumption: 2 scfm steady state
8-inch stroke: (80° rotation)
Input signal ranges: 3-15, 0-30 psig (21-103,
0-207 kPa), and 4-20 mA
Torque and load data
Stall torque: 4600 ft.-lbs. (6238 N.m)
Maximum friction load: 1100 ft.-lbs. (1492 N.m)
Maximum allowable
weight load: 1600 ft.-lbs. (2170 N.m)
Maximum load capability
of the manual operator: 45 psi (310 kPa)
differential across the
piston
Drawings are for reference purposes only and Emerson does not warrant the accuracy of the dimensions herein.
1
Specifications are subject to change without notification. Our policy is one of continuous improvement and we reserve the right to change specifications.
For styles 450890, 452167, and 457696:
473662-010 ... 1 AC Switch
473662-011 ... 2 AC Switches
473662-012 ... Pot only
473662-012 ... Pot only
473662-013 ... 1 AC Switch and 1 Pot
473662-014 ... 2 AC Switches and 1 Pot
473662-015 ... 1 DC Switch
473662-016 ... 2 DC Switches
473662-017 ... 1 DC Switch and 1 Pot
473662-018 ... 2 DC Switches and 1 Pot
8 X 14 TORQUE FLOOR MOUNTED SPECIFICATIONS 1
Typical 8 X 14 torque type floor mounted positioner with dust cover, styles
452167, 457696, 443700 and 457031. Refer to individual outline drawings.
Limit Switches (SPDT) and Potentiometer Accessory (add 15 lbs.)
Cam Shape
The standard cam produces a straight line relationship.
Shaping the cam in the field produces other relationships.
Limit Switches
Limit ratings listed under 4 x 5 Torque Type Floor Mounted Type
Positioner on page 6 "Limit Switches" and "Current Rating" also
apply to this positioner.
To Order, Specify:
1. Positioner style number (add a -1 if potentiometer and
limit switch are required).
2. Accessory style number.
3. Desired input signal
14. Page 14
8 X 14 TORQUE TYPE FLOOR MOUNTED ORDERING INFORMATION
Includes air filter style 372538-2 and clevis, style 274472
Code Manual Operator Dust Cover Air Lock Heater andThermostat Shp. Wt. lbs./kgs
452167 x 550/250
457696 x x 560/254
452593 x x 580/263
443700 x x x 600/272
457031 x x x x 610/277
Accessories
Code Description
7362C69G03 Limit switches 2
DPDT – NEMA 4, 13, factory wired to terminal box 5/2,3
I/P 4 – 20 mA Input
Code Description
9885A31H01 Current/pneumatic converter
275431-007 Pressure gage
4505C21G01 Filter regulator
Fail-Safe Option 4
Code Description
2
Check valves 2
, diaphr. valves
SKI - 63580 1
2.2 ft. tank 1
, pressure switch 50/22,7
1
Solenoid valve, mounted and piped
Master Slave Positioners
Code Description
6630D09G01 Master – manual oper., dust cover air lock, heater 620/281
6630D08G01 Slave – manual oper., dust cover air lock, heater 550/250
To Order, Specify:
1
Desired input signal [3 –15, 0 – 30 psig (21-103, 0-207 kPa), or 4 – 20 mA – see accessories].
2
If 4 – 20 mA input is required, also order I/P from accessories.
A typical cylinder-thrust vs. speed characteristic.
The curve of relative horsepower output is also shown.
Set of Characteristic Curves for a Typical
Air-operated Power Cylinder (Piston
displacement and time are plotted for
suddenly applied full-range positioning inputs
to the cylinder. The linear sections of the
curves correspond to steady speed).
Consult factory for ordering information.