This document summarizes the IR RGB LED Controller item CT305RL. It converts DMX-512 digital signals to analog signals with 1-3 output channels at 256 gradations each, maxing at 5A per channel. It can be controlled via IR remote or DMX signals for various color changing effects. Key features include DMX512 compatibility, multiple control modes, brightness and speed adjustment, and protection features. It connects an RGB LED module for controllable color lighting.
DMX512 decoder PXL24-1-576 adopts the advanced micro-computer control technology and converted the DMX512/1990 digital signal widely used in international to the analog control signal. 1~24 channels output for option and each channel able to achieve 256 gradations of controling, and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.
DMX splitter DMX102 is a special digital signal distribution device used for the DMX512 digital lighting controller and adopts the high voltage isolation technique in various in-out interface.
Features:
4 ChannelAnalog input – (12bit- 0-10v/0-20mA/4-20mA)
LED indication for each input status,error, communication port and power ON
Din rail mount assembly.
DIP switch for Modbus RTU slave configuration
No configuration software needed
CE Mark
DMX512 decoder PXL24-1-576 adopts the advanced micro-computer control technology and converted the DMX512/1990 digital signal widely used in international to the analog control signal. 1~24 channels output for option and each channel able to achieve 256 gradations of controling, and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.
DMX splitter DMX102 is a special digital signal distribution device used for the DMX512 digital lighting controller and adopts the high voltage isolation technique in various in-out interface.
Features:
4 ChannelAnalog input – (12bit- 0-10v/0-20mA/4-20mA)
LED indication for each input status,error, communication port and power ON
Din rail mount assembly.
DIP switch for Modbus RTU slave configuration
No configuration software needed
CE Mark
12-24VDC 108-216W constant voltage dmx decoder adopts the advanced micro-computer control technology and converted the DMX512/1990 digital signal widely used in international to the analog control signal.
The PX24500 DMX Driver allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors.
12-24VDC 108-216W constant voltage dmx decoder adopts the advanced micro-computer control technology and converted the DMX512/1990 digital signal widely used in international to the analog control signal.
The PX24500 DMX Driver allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors.
dmx touch panel controller DMX-P06 is a DMX512 control touch panel which focuses on indoor decorative lighting, which can be used stand alone or with computer. This led controller comprises scene-edit software. The sensitive keys enable you to easily and comfortably modify the lighting effects, scene, and color with your fingers.You can edit various lighting effects by downloading the program which edit according to your special requirement from your PC.This control system can fulfill 256 grey levels for each R,G,B color,totally 16.77 million real full-color. The software has been developed specially for architectural lighting and features easy to use effects which can be dropped onto timelines, along with multi-zone and synchronization allowing you to program a project with multiple rooms and areas with ease.
1. IR RGB LED Controller
Item No.:CT305RL
Meets DMX512(1990)
Max.5A/CH output
IR Remote control
Apply to verious of LED Driver
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION
Updated at 2010-06-04 -1- CT305RL-V1.3
2. DMX DECODER & DRIVER SERIES
SUMMARIZE
Welcome to use CT305RL DMX512 RGB LED controller. CT305RL, a controller with the advanced
micro-computer control technology, converts the DMX-512/1990 digital signal widely used in international
to the analog signal. Output 1~3 channels for option and each channel able to achieve 256 gradations,
and also it can be used as the connector between PC digital-light controller and analog light modulator. It
is mainly used for the controlling of buildings & lights applied LED. Also, it is able to change the DMX con-
trol & self-changing program freely by IR remote and make it be with many kinds of changing effect.
Product Features
◆ Meets DMX512/1990
◆ 256 gradations and full-color control
◆ 3 output channels and constant voltage Mx.5A per channel
◆ It can achieve asynchronous color changing effect under working with DMX control system
◆ With many kinds of self-changing effect, and it is able to adjust the speed, brightness…etc
◆ Mode,suspend protection,output short circuit protection
◆ With IR remote function, and the red LED will be flashing once the IR signal found.
◆ Easy to connect and install
◆ With the light color selected mechanism, and be able to control the light with 1~3 colors
◆ Setting the DMX address freely
◆ Modularizing and can be matched with different LED module neatly
◆ Custom-made
Tech-parameter
Decode CH. : 3CH
Signal Input: DMX-512/1990 standard digital signal
Signal output: 0~24V , Max. 5A
Power Supply: DC12~24V
Power Dis.: <1W
Power output: 12V: <180W; 24V: <360W
IR Romote distance ≤10m
Work Temp. : 0~70℃
Size: 175(mm)*45(mm)*35(mm),(can be custom-made)
Weight: ≤300g
DIMENSION
CT305RL
Updated at 2010-06-04 -2- CT305RL-V1.3
3. DMX DECODER&DRIVER SERIES
Appearance
(1) DMX signal input interface(RJ45)
(2) DMX signal output interface(RJ45)
(3) Address setting interface
(4) Driver output interface
(5) Power input interface
(6) IR receiver jack
(7) External IR receiver
(8) Remoter, and the function details refer to the next page
Remoter's function instruction
DMX:Press this button and get into DMX control, the device will start to receive the DMX signal
P1-P5: 5 regular changing modes
P1: 8 regular colors changing(Red,Orange,Yellow,Green,Cyan,Blue,Purple,White)
P2-P5: Full-color changing and the chaning mode as follwing.
LOCK:Pause and keep changing
FADE:Changed from jumped change to gradual change on regular mode(only used for P2-P5)
BRIGHTNESS:16-level brightness adjust for presaved program
+: Brightness increase 1 level
-: Brightness decrease 1 level
SPEED:16-level speed adjust for presaved program
+: Speed increase 1 level
-: Speed decrease 1 level
Interface Introduction
◆ DMX signal interface
◆ Address code setting on/off
How to use See "DMX series address DIP switch"
◆ Power Input Interface
DC12~24V input
◆ Driver output interface
Common anode,V+ and R,G,B interface,can drive kinds of RGB module or single-color module,
Can regulate output current according to the actual load.
CT305RL
1
2
3
4
5
6
87
Updated at 2010-06-04 -3- CT305RL-V1.3
4. DMX DECODER&DRIVER SERIES
Operating instruction
PX403 Decoder is controlled by DMX-512, and its fore-end connect with the DMX512 signal transmit
device. Take EC-DMX512 for example, its rear-end can connect with 0~24V circuit signal device. This
instruction is only for LED driver. The connecting diagram is as following.
TYPICAL APPLICATIONS
◆ Circuit Diagram 1
Connecting of DMX-512 Signal
◆ DMX signal cable used the RVSP,and DMX signal tells positive(+) from negative (-). While welding the
DMX signal cable plug,there must pay much attention to know postive(+) from negative(-), and then
connect the DMX512 signal cable with the corresponding input interface of CT305RL correctly.
◆ Connect a signal terminal at the end of the whole connetion.The last one of the CT305RL tenth of the
DIP switch can be set aside under the.
CT305RL
Updated at 2010-06-04 -4- CT305RL-V1.3