Melquiades L. Valencia is applying for the position of Mechanical Technician. He has over 30 years of experience as a mechanical technician working on offshore oil rigs in Angola, Brazil, and the Philippines. His experience includes maintenance, repair, inspection and testing of mechanical equipment such as pumps, turbines, and valves. He is seeking permanent employment where he can utilize his experience and skills to reduce maintenance costs.

1. MELQUIADES L. VALENCIA
Lorenzo Village, San Sebastian,
Lipa City, Batangas, Philippines
Tel. No. 0063-43-7572829 / 0063 915 558 0113
E-mail address: melvalencia05au@yahoo.com.ph
POSITION APPLIED FOR: MECHANICAL TECHNICIAN
PERSONAL DATA :
Nickname : Mel
Age : 54
Birth date : December 10, 1961
Marital Status : Married
Nationality : Filipino
Passport Number : EB8586189
Occupational Goals :
If I get employed permanently I shall fulfill the technical need of the company,
reducing the maintenance cost, being resourceful I shall utilize each and every
resource of the company.
JOB EXPERIENCE
Company: FPSO N’GOMA
SBM CONTRACTORS
ANGOLA AFRICA
Sept. 26 2013 up to Present
Designation: Mechanical technician
Area assignment: FPSO N’GOMA ( AFRICA )
Offshore
DUTIES AND RESPONSIBILITIES:
• I am involved in FPSO N’GOMA from construction,
commissioning & operational testing procedure to ensure that
all equipment are working properly as per vendor
requirement.

2. • Also responsible for ensuring allotted mechanical
maintenance and repair work is carried out safely, efficiently
and according to procedure.
• Supervisor is made aware of all activities , especially where
safety is an issue.
• Carry out Visual, Codes and Detailed inspections on
Mechanical equipment.
• Record and accurate and full description in the appropriate
document history
• Equipment, waste of other materials for disposal are dealt
with according to the correct procedure.
• Environmental protection and pollution control are enforced
effectively with colleagues, subordinates and subcontractors.
• Work area within your own responsibility is kept clean and
free of hazards.
• Positive action is taken to stop hazards and unsafe behaviors
• Colleagues and subcontractors are alerted ASAP of any
hazards or potentially dangerous changing conditions.
• All potential and actual incidents are reported to the relevant
supervisor.
• See Station Bill. Perform emergency response role.
• Demonstrate competence during Emergency Response Drills
and training exercises.
• Reporting to the maintenance supervisor
• Responsible for the safe and correct execution of the tasks
within the preventive maintenance program that are
assigned.
• The main area of responsibility is to ensure that all
equipment are available.
Company: FPSO FRADE
SBM CONTRACTORS
VITORIA BRAZIL
April 13, 2008 up to June 16 2013
Designation: Mechanical Technician
Area of assignment: FPSO FRADE ( Brazil )
Offshore
DUTIES AND RESPONSIBILITIES:

3. • In conjunction with supervisor plans preventive maintenance
then inspects equipment, performs maintenance routines,
Diagnoses problems, determines corrective work required
and performs or directs work within assigned authority.
Performs daily maintenance, adjustment, repair and
commissioning of all types of process, mechanical and
rotating equipment including process equipment, marine
equipment, living quarters equipment and life-saving
equipment. Such as lifeboats, fire water pumps and fire
fighting equipment, life sustaining equipment i.e. water-
makers, HVAC, dual fuel turbine driven electrical power
generators and pumps also including major production and
support facilities i.e. gas generators, gas and air
compressors, pressure vessels, oil pumps, water injection
pumps, valves and associated process equipment, HPU”s
and hydraulic system etc,. marine equipment such as
cranes, moorings, FPSO turret assembly and to shuttle
tanker export pumps. Typical activities include general
maintenance (checking oil levels, greasing, filter element
changeout etc), equipment strip down, replacing bushing
and bearings, valve trim replacement, pump rotor
replacement, fan replacement, hydraulic system component
replacement, crankshaft replacement, aligning drivers with
driven equipment, process pipework repair replacement, etc.
• Performs detailed analysis of engines, turbines, gearboxes,
pumps, etc. using state of the art vibration monitoring and
data gathering techniques (analysis by 3rd
party) to predict
failure.
• On HPU’s failure, diagnose failure and prescribes or
performs repair as required to return to service.
• Diagnose/repair hydraulic failure of crane hydraulic control
system such as hydraulic control valve, hydraulic pump etc.
• Replaced hydraulic cylinder repair kit.
• Replaced hydraulic hoses.
• On equipment failure, diagnoses failure and prescribes or
performs repairs as required to return equipment to service.
Reviews diagnosis with supervisor when equipment
problems are complex or may lead to extended downtime or
high costs. Makes decision applying knowledge of
equipment, materials and trade practices.
• Ensures that an adequate supply of mechanical supplies,
consumables and spare parts are on hand to support the
maintenance activities.

4. • Serves when assigned as the mechanical
supervisors/inspector for repairs and major overhauls
perform on equipment by contact service personnel
• Observes company safety procedures and practices good
housekeeping. Report or corrects unsafe conditions or
practices. Ensures that maintenance work is perform in an
efficient, safe and economical manner.
• Trains or assist in the training of junior technicians or newly
assigned personnel to the FPSO.
• Colleagues and subcontractors are alerted ASAP of any
hazards or potentially dangerous changing conditions.
• All potential and actual incidents are reported to the relevant
supervisor.
• See Station Bill. Perform emergency response role.
• Demonstrate competence during Emergency Response
Drills and training exercises.
• Reporting to the maintenance supervisor
• Responsible for the safe and correct execution of the tasks
within the preventive maintenance program that are
assigned.
• The main area of responsibility is to ensure that all
equipments are available.
Company: AMEC PHILIPPINES
Level 22 Tower 1, Insular Life Bldg.
Filinvest Corporate City, Alabang Muntinlupa
July 17, 2007 to October 11, 2007
Designation: Mechanical Technician
Area of assignment: BAYU-UNDAN EAST TIMOR
(Offshore)
DUTIES AND RESPONSIBILITIES:
• Responsible for the general repair of all mechanical
equipment.
• Replace new Gas Turbine Engine (Rolls Royce RB211 Re-
Injection/Export Gas Compressor) with Gear Box Model
NF1819D and Dresser-Rand Model D6RB (High Pressure)
Centrifugal Compressor
• Boroscope Inspection of Gas Turbine Engine Hotgas Path
and 8000 Hr. Service as per procedure like inspection of

5. Combustion Chamber and Liner Arrangement, Combustion
Case Section View, Combustion Liner Inner & Outer Walls,
Combustion liner Segment, Combustion Head Section,
inspect the inner burner heads and turbine Nozzle Guide
Vanes etc.
• Also check and align Lufkin Gearbox and other pumps
• Flange test plus hot tapping the coupon out of the weldolet
• Removing of blind & re-install choke at re-injection Well
Backflow Segment
Company: CAPE EAST PHILIPPINES
Lot 25 DBP Ave., FTI Complex
Taguig, Metro Manila, Philippines
August 18 up to December 15, 2006
Designation: Mechanical Technician
Area of assignment: Shell Malampaya Palawan
(offshore)
Responsible for general repair and trouble shoot of all
mechanical equipment, realignment of pump and motor,
overhauling of pump, Overhaul and hydro testing of valves,
overhauling of heat exchanger, opening and recondition of
export gas compressor suction scrubber, cold separator and
clarifier. Check and repair/overhaul all rotating equipment
etc.
Company: KLR TRADING AND CONSTRUCTION
148 Mataas na Lupa, Lipa City
June 10, 1995 up to July 13, 2006
Designation: Maintenance Foreman
Area of Assignment : Lima Industrial Park
Lipa City
DUTIES AND RESPONSIBILITIES:
• Responsible for the scheduling of corrective
maintenance, allocation of manpower to job,
identification and requisition of spare parts, breakdowns
and recovery requirements coordinate with other
department.
• Repair all mechanical equipment and hydraulic control
system such as diesel generator, dump trucks and all
equipment assigned to us.
• Check and align Ibarra gear box and other pumps.
• Check and repair/overhaul all rotating equipment.

6. • Responsible for preventive and corrective maintenance
and requisition of spare parts.
• Performed other duties as assigned.
Company: CONSOLIDATED PREVENTIVE MAINTENCE CORP.
(CPMC)
P.O. Box 20890
KAAU Project
Jeddah, K.S.A.
August 1, 1993 to January 21, 2005
Designation: Shift Supervisor
Area of Assignment: King Abdulaziz University
Health Science Center
Jeddah, K.S.A.
DUTIES AND RESPONSIBILITIES:
• Responsible for maintaining the continues operation of central utility plan
equipped with 4 units 6,000 tons capacity centrifugal chillers using R-12
refrigerant, 3 units of air handling with fully automatic (Honeywell Control)
operation, 3 units of air compressor as well ass 5 units of chilled water with
capacity of 8,010 gpm each and condenser water pumps with a capacity of
10525 gpm each. Also, job covers the operation of emergency chillers which
has 1,500 tons capacity driven by caterpillar engine with chilled water pumps
and condenser water pumps.
• Monitor the operation of 3 units 500hp York Shipley boiler, fuel pumps and water
softener.
• Maintenance and daily operation of chilled H20 system and supervises CUP
operation.
• Evaluation of the performance of the maintenance contractor.
• Making a follow up for any development in maintenance techniques and the
application of the rapidly developing irrigation system.
• Maintain and up date computer graphics files of equipment within the area of
responsibility.
• Performs other duties as assigned.
Company: DANIEL INTERNATIONAL (S.A.) LTD.
P.O. Box 8120, Jeddah 21482, K.S.A
October 20, 1991 to July 31, 1993

7. Designation: Field Craftsman
Area of assignment: King Abdulaziz University
Health Science Center
Jeddah, K.S.A.
DUTIES AND RESPONSIBILITIES:
• Responsible for maintaining the continues operation of central utility plant
equipped with 4 units 6,000 tons capacity centrifugal chillers using R-12
refrigerant, 3 units of air handling with fully automatic (Honeywell Control)
operation, 3 units of air compressor as well as 5 units of chilled water with
capacity of 8,010 gpm each and condenser water pumps with a capacity of
10525 gpm each.
• Maintain also the continuous operation of 24 units of cooling towers.
Company: MAWARID SERVICES LIMITED
P.O. Box 14308, Jeddah 21424, K.S.A.
July 1, 1988 to August 18, 1991
Designation: Heavy Equipment Mechanic
Area of assignment: King Abdulaziz International Airport
DUTIES AND RESPONSIBILITIES:
• Work as a mechanic in the Heavy Equipment Maintenance section at the
International airport, task covers the varied routine maintenance and repair of
many equipment and hydraulic power units which includes: Caterpillar Heavy
Plant, forklifts, Mercedes, International and Kenworth Commercial, specialized
equipment which includes crushman, FMC and Tenant Sweepers. The adoption
of commercial trucks which are all operated with hydraulic control system such
as the refuse collection, sludge removal and tankers have given me a good
mover fault finding and rectification.
• Responsible for the scheduling of corrective maintenance, allocation of
mechanics to job, identification and requisition of spare parts, breakdowns and
recovery requirements, coordination with user department, liaison with computer
section of the vehicle records as well as keeping H.E.M.S. records update.
• Repair/replaced hydraulic control system such as hydraulic control valves,
hydraulic pumps, hydraulic cylinders etc.

8. Company: MAWARID SERVICES LIMITED
P.O. Box 14308, Jeddah 21424, K.S.A.
March 15, 1986 to July 1, 1988
Designation: Chilled Water Operator
Area of assignment: King Abdulaziz International Airport
DUTIES AND RESPONSIBILITIES:
• Responsible for maintaining the continues operation of load
center #3 equipped with 10 units 2,000 tons capacity
centrifugal chillers using R12 refrigerant , 10 units of air
dryer, 10 air handling units with fully automatic (JOHNSON
control) operation, 4 units of chilled and condenser water
pumps of multi-stage centrifugal type with total capacity 0f
472.8 tons per hour respectively.
• Maintain and update computer files of equipment with in the
area of responsibility.
• Performed other duties as assigned.
EDUCATIONAL BACKGROUND:
College 1982 Mechanical Technology
Pablo Borbon Memorial Institute of Technology
(now) Batangas State University
Batangas City
High School 1979 Batangas National High School
Batangas City
Elementary 1975 Arawan Elementary School
Arawan, San Antonio, Quezon
TRAINING AND SEMINARS ATTENDED:
July 3-7, 2009 Advanced Training in Firefighting
July 22-25, 2009 Proficiency and Survival Craft and Rescue Boats
July 3, 2008 Helicopter Underwater Escape Training
April 4-12, 2008 Basic Safety Training

9. July 7-8, 2008 Shore-Based Firefighting
September 17-26, 2008 General Tanker Familiarization
- Oil Gas and Chemical Tankers
August 11, 2007 Working at Heights
July 30, 2007 Breathing Apparatus
July 24, 2007 Confine Space Entry
August 18-20, 2006 Basic Offshore Safety
Induction and Emergency Training
- Safety Induction
- Fire Fighthing
- Sea Survival / Lifeboat
- First Aid
- Huet with EBS
August 30 to Sept 2, 2006 Health and Safety Security Environment
- Occupational Health
- Environment
- Safety – Hazards & Hazardous Activities
- Task Risk Management
- Hearts & Minds-Proactive Intervention
- Permit Users
September 8 to 12, 2006 Safety awareness
- Confined Space Entry
- Lifting Operation
- Gin Wheels and Ropes
- Manual Handling
- Work at Heights
- Risk Assestment
- Control of Substance
- Hazardous to Health Regulation.
- Hand, Wrist and Finger Safety Workshop
- Hand Torque Awareness
- COSHH Awareness
- Zero Accident
- Harness / Safety Block Inspection
1992 Operation and Maintenance training for 19EA and
17PA4 KAAU Centrifugal Water chillers of Carrier
International Corporation

10. PERSONAL DATA:
Age : 54 yrs, old
Sex : Male
Birth date : December 10, 1961
Birthplace : Arawan, San Antonio, Quezon, Philippines
Height : 5’5”
Weight : 130 lbs.
Nationality : Filipino
Civil Status : Married
Religion : Roman Catholic
Spouse’s name : Marilyn Valencia
Language Spoken : Filipino, English
CHARACTER REFERENCES:
1. Mr. Clive Cartwright
Supervisor
Heavy Equipment Maintenance Section
King Abdulaziz International Airport
2. Mr. Sydney Coetzee
Mechanical superintendent
FPSO FRADE
Tel. no. 00552221064962
3. Mr. Fernando Rocafort
General Manager
KLR TRADING AND CONSTRUCTION
148 Mataas na Lupa, Lipa City
Tel. no. 0063437032517
4. Mr. Ricardo Goncalves
Mechanical Supervisor
FPSO N’GOMA
I hereby certify that the above information is true and correct to the best of
my knowledge and belief.

11. Melquiades L. Valencia
Signature