On February 2, 2015, Secretary of Energy Ernest Moniz gave a presentation at Department of Energy headquarters about the agency's fiscal year 2016 budget request. View the slides above to see highlights from year's budget.
Access to Electricity in Odighi Community in Edo State Using Photo VoltaicOgbemudia Godfrey
The project “Access to Electricity in Odighi Community in Edo State Using Photo Voltaic” has been implemented by the Community Research and Development Centre (CREDC) as part of the PREEEN Project (Promoting Renewable Energy and Energy Efficiency in Nigeria). It was implemented with support from the United Nations Development Programme (UNDP), the Global Environment Facility Small Grant Programme (GEF-SGP) and the Green Grant Fund (GGF). The Project was implemented in Odighi Community located in Ovia North-East Local Government Area of Edo State, Southern Nigeria.
In Odighi Community before the implementation of this project, the community was not connected to the national electricity grid and thus lacked access to electricity. This forced many of the inhabitants to rely on diesel and petrol generators for electricity supply for those who can afford it and majority of the community people used paraffin lamps and kerosene lanterns for lighting at night. This situation exposed them to various respiratory disease associated with the burning of hydrocarbon based fuel to generate heat and light energy and also increased poverty level as they kept spending more of their household income on unsustainable domestic energy sources.
The objectives of the project were: 1. To increase access to modern energy services (electricity) in Odighi Community using solar generators (Photovoltaic systems). This will enhance access to information, boost educational activities, reduce the incidence of respiratory diseases and discourage the use of traditional energy sources (kerosene lanterns, local paraffin lamps, diesel and petro generators) causing the emission of greenhouse gases leading to climate change. 2. To build capacity in the community to install and maintain photovoltaic system. This will ensure the participation of the community in the proposed project and to empower the community members sustain the project and to become potential employees in the emerging renewable energy industry in Nigeria. 3. To create awareness on the potential for renewable energy technologies (RETs) to address the energy crisis in Nigeria and at the same time mitigate the emission of greenhouse gases.
The work of Mr. Mark Glick, Hawaii State Energy Office Energy Administrator, his team, the stakeholders, participating organizations and members of the public ensure that focus on an achievable, realistic pathway is maintained and followed.
The 100% Clean Energy Goal simply says we believe that clean energy is an absolute priority that requires no less than our best dedicated efforts.
The path remains, the forecast is brighter and we shall be evermore diligent.
A REVIEW ON GREEN ENERGY -A SUSTAINABLE APPROACHIJSIT Editor
The current systems of energy supply and use are clearly not sustainable in terms of economic
environment and society .So there is an urgent need for us to increase energy efficiency, reduce energy
consumption, reduce harmful effects by using fossil fuels, mitigating greenhouse emissions. So it is better to
adopt green energy technology/sustainable energy/clean energy to attain sustainable development. .
Present paper focuses on the green energy/renewable energy technology that can be adopted in
order to achieveSustainable development. Some innovative are also mentioned in this paper
On February 2, 2015, Secretary of Energy Ernest Moniz gave a presentation at Department of Energy headquarters about the agency's fiscal year 2016 budget request. View the slides above to see highlights from year's budget.
Access to Electricity in Odighi Community in Edo State Using Photo VoltaicOgbemudia Godfrey
The project “Access to Electricity in Odighi Community in Edo State Using Photo Voltaic” has been implemented by the Community Research and Development Centre (CREDC) as part of the PREEEN Project (Promoting Renewable Energy and Energy Efficiency in Nigeria). It was implemented with support from the United Nations Development Programme (UNDP), the Global Environment Facility Small Grant Programme (GEF-SGP) and the Green Grant Fund (GGF). The Project was implemented in Odighi Community located in Ovia North-East Local Government Area of Edo State, Southern Nigeria.
In Odighi Community before the implementation of this project, the community was not connected to the national electricity grid and thus lacked access to electricity. This forced many of the inhabitants to rely on diesel and petrol generators for electricity supply for those who can afford it and majority of the community people used paraffin lamps and kerosene lanterns for lighting at night. This situation exposed them to various respiratory disease associated with the burning of hydrocarbon based fuel to generate heat and light energy and also increased poverty level as they kept spending more of their household income on unsustainable domestic energy sources.
The objectives of the project were: 1. To increase access to modern energy services (electricity) in Odighi Community using solar generators (Photovoltaic systems). This will enhance access to information, boost educational activities, reduce the incidence of respiratory diseases and discourage the use of traditional energy sources (kerosene lanterns, local paraffin lamps, diesel and petro generators) causing the emission of greenhouse gases leading to climate change. 2. To build capacity in the community to install and maintain photovoltaic system. This will ensure the participation of the community in the proposed project and to empower the community members sustain the project and to become potential employees in the emerging renewable energy industry in Nigeria. 3. To create awareness on the potential for renewable energy technologies (RETs) to address the energy crisis in Nigeria and at the same time mitigate the emission of greenhouse gases.
The work of Mr. Mark Glick, Hawaii State Energy Office Energy Administrator, his team, the stakeholders, participating organizations and members of the public ensure that focus on an achievable, realistic pathway is maintained and followed.
The 100% Clean Energy Goal simply says we believe that clean energy is an absolute priority that requires no less than our best dedicated efforts.
The path remains, the forecast is brighter and we shall be evermore diligent.
A REVIEW ON GREEN ENERGY -A SUSTAINABLE APPROACHIJSIT Editor
The current systems of energy supply and use are clearly not sustainable in terms of economic
environment and society .So there is an urgent need for us to increase energy efficiency, reduce energy
consumption, reduce harmful effects by using fossil fuels, mitigating greenhouse emissions. So it is better to
adopt green energy technology/sustainable energy/clean energy to attain sustainable development. .
Present paper focuses on the green energy/renewable energy technology that can be adopted in
order to achieveSustainable development. Some innovative are also mentioned in this paper
A Comprehensive Review of Possibility using Solar Energy for Electricity Gene...ijtsrd
Libya suffers from electricity shortages, and many challenges will have to be overcome to meet future increases in electrical demands. The deficiency of electricity generation in Libya is clearly manifested in the fact that demand on electricity still exceeds its supply as blackouts become more frequent. In peak demand time, blackouts and outages are the major phenomena in almost all the Libyan regions. Due to technical issues, illegal connections and throughout the lengthy civil war, the generation and transmission in addition to distribution functions suffered partial destruction and consequent outages. For all the mentioned problems, Renewable energy sources and technologies have potential to provide solutions to the long standing energy problems being faced by the Libyan electricity. Alternative renewable energy sources like solar energy technology can be an important part of Libyas plan not only to add new capacity but also to increase energy security, address environmental concerns, as well as to overcome energy shortage. Libya is very rich in solar energy resources and possesses large wasteland areas in the Sahara that represent 88 of the total area and much of this is relatively flat. Libya is one of the countries with the abundance of this type of energy, with a daily average of the sunshine reached to 8.1 kWh m2 day, and where annual solar activity more than 3500 kWh m2 year on the horizontal surface. Losses in the transmission and distribution system will be reduced since power is generated near loads. The grid availability and stability will increase and individuals can save money in their electricity bill and finally the generated power is clean and nonpolluting. This paper presents the main sources of alternative renewable energy in Libya and its potential besides the main reasons Libya is turning to alternative energy solutions to fully utilize its renewable energy resources, fulfill the energy demand in the future and to reduce the outages of electricity and carbon emissions. The study also found that, there is need to investigate more the potential of offshore wind, biomass, and hydro tide and wave thermal energy .The paper finishes with some conclusions and recommendations. Dr. Nuri M. Triki "A Comprehensive Review of Possibility using Solar Energy for Electricity Generation in Libya" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35717.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35717/a-comprehensive-review-of-possibility-using-solar-energy-for-electricity-generation-in-libya/dr-nuri-m-triki
3. Increasing Financing and Investments for Clean and Renewable Energy Access...ENVIRONMENTALALERTEA1
This position paper is an output from several CSOs engagements coordinated by Environmental Alert with financial support from Norad within the framework of ‘Increasing access to sustainable and renewable energy alternatives in the AlbertineGraben’ that is implemented by WWF-Uganda Country Office
Integrated Science: Merging scientific disciplines to address global challengesDuPont
DuPont's Senior Vice President and Chief Science & Technology Officer, Doug Muzyka, addressed the 2013 Council for Chemical Research (CCR) conference on May 20, 2013.
The world is facing unprecedented challenges, brought on partly due to the increasing demands of a growing population. Muzyka challenged the chemical industry, who plays an important role in providing sustainable energy solutions, to continue to differentiate and diversify chemical offerings. According to Muzyka, our ongoing success will require continued integration of science, diversification of ideas and collaboration.
Boom or bust – the future prospects for biofuels and oilseed growersNNFCC
This presentation was given by NNFCC’s Policy and Strategy Manager David Turley at the United Oilseeds and HGCA oilseeds update meeting in February 2013.
Introduction to Energy Efficiency and Renewable Energy for Hotels in FijiSrinath Dolage
Finding innovative approaches to reduce energy consumption,
safeguard access to energy sources, or produce energy in a more cost-effective manner are now priorities. Implementing an organization-wide energy management plan is not only good for the bottom line but will also increase competitiveness and improve the planet!
Renewable Energy a key element of energy mix for energy security of IndiaDr Naim R Kidwai
Invited talk on "Renewable Energy: A Key Element of Energy Mix for sustained growth and Energy Security" in National Conference on Emerging Trends in Non Conventional Energy Resources “ETNCER 16” organized by Department of ECE, EE, Phy, Integral University on 22 Oct 16.
Off-grid renewable power can meet demand in un-served rural areas. As a and scalable resource, renewable energy technologies are well suited to meet the need for power in remote areas that lack grid and road infrastructure.
Sustainable energy in India: A Paradigm ShiftAdarsh Tripathi
This presentation briefly introduces with the current scenario of Sustainable & Renewable Energy in India. It also includes various government policies & various case studies from the very remote villages & locations of India.
A Comprehensive Review of Possibility using Solar Energy for Electricity Gene...ijtsrd
Libya suffers from electricity shortages, and many challenges will have to be overcome to meet future increases in electrical demands. The deficiency of electricity generation in Libya is clearly manifested in the fact that demand on electricity still exceeds its supply as blackouts become more frequent. In peak demand time, blackouts and outages are the major phenomena in almost all the Libyan regions. Due to technical issues, illegal connections and throughout the lengthy civil war, the generation and transmission in addition to distribution functions suffered partial destruction and consequent outages. For all the mentioned problems, Renewable energy sources and technologies have potential to provide solutions to the long standing energy problems being faced by the Libyan electricity. Alternative renewable energy sources like solar energy technology can be an important part of Libyas plan not only to add new capacity but also to increase energy security, address environmental concerns, as well as to overcome energy shortage. Libya is very rich in solar energy resources and possesses large wasteland areas in the Sahara that represent 88 of the total area and much of this is relatively flat. Libya is one of the countries with the abundance of this type of energy, with a daily average of the sunshine reached to 8.1 kWh m2 day, and where annual solar activity more than 3500 kWh m2 year on the horizontal surface. Losses in the transmission and distribution system will be reduced since power is generated near loads. The grid availability and stability will increase and individuals can save money in their electricity bill and finally the generated power is clean and nonpolluting. This paper presents the main sources of alternative renewable energy in Libya and its potential besides the main reasons Libya is turning to alternative energy solutions to fully utilize its renewable energy resources, fulfill the energy demand in the future and to reduce the outages of electricity and carbon emissions. The study also found that, there is need to investigate more the potential of offshore wind, biomass, and hydro tide and wave thermal energy .The paper finishes with some conclusions and recommendations. Dr. Nuri M. Triki "A Comprehensive Review of Possibility using Solar Energy for Electricity Generation in Libya" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35717.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35717/a-comprehensive-review-of-possibility-using-solar-energy-for-electricity-generation-in-libya/dr-nuri-m-triki
3. Increasing Financing and Investments for Clean and Renewable Energy Access...ENVIRONMENTALALERTEA1
This position paper is an output from several CSOs engagements coordinated by Environmental Alert with financial support from Norad within the framework of ‘Increasing access to sustainable and renewable energy alternatives in the AlbertineGraben’ that is implemented by WWF-Uganda Country Office
Integrated Science: Merging scientific disciplines to address global challengesDuPont
DuPont's Senior Vice President and Chief Science & Technology Officer, Doug Muzyka, addressed the 2013 Council for Chemical Research (CCR) conference on May 20, 2013.
The world is facing unprecedented challenges, brought on partly due to the increasing demands of a growing population. Muzyka challenged the chemical industry, who plays an important role in providing sustainable energy solutions, to continue to differentiate and diversify chemical offerings. According to Muzyka, our ongoing success will require continued integration of science, diversification of ideas and collaboration.
Boom or bust – the future prospects for biofuels and oilseed growersNNFCC
This presentation was given by NNFCC’s Policy and Strategy Manager David Turley at the United Oilseeds and HGCA oilseeds update meeting in February 2013.
Introduction to Energy Efficiency and Renewable Energy for Hotels in FijiSrinath Dolage
Finding innovative approaches to reduce energy consumption,
safeguard access to energy sources, or produce energy in a more cost-effective manner are now priorities. Implementing an organization-wide energy management plan is not only good for the bottom line but will also increase competitiveness and improve the planet!
Renewable Energy a key element of energy mix for energy security of IndiaDr Naim R Kidwai
Invited talk on "Renewable Energy: A Key Element of Energy Mix for sustained growth and Energy Security" in National Conference on Emerging Trends in Non Conventional Energy Resources “ETNCER 16” organized by Department of ECE, EE, Phy, Integral University on 22 Oct 16.
Off-grid renewable power can meet demand in un-served rural areas. As a and scalable resource, renewable energy technologies are well suited to meet the need for power in remote areas that lack grid and road infrastructure.
Sustainable energy in India: A Paradigm ShiftAdarsh Tripathi
This presentation briefly introduces with the current scenario of Sustainable & Renewable Energy in India. It also includes various government policies & various case studies from the very remote villages & locations of India.
this ppt discuss about importance of end pipe technology in day to day life. Necessity and need of EOP. how technology can be used to save the environment and ecology. Role of EOP in reducing carbon footprint.
As background report for the Delhi International Renewable Energy Conference – DIREC 2010, taking place in New Delhi from 27 to 29 October 2010, this paper describes the status of renewable energy in India as of today.
REN21’s Renewables Global Status Report (GSR) provides a comprehensive and timely overview of renewable energy market, industry, investment and policy developments worldwide. It enables policymakers, industry, investors and civil society to make informed decisions. The Renewables Global Status Report relies on up-to-date renewable energy data, provided by an international network of more than 500 contributors, researchers, and authors.
The distress facing the agriculture sector needs an integrated approach deriving a win-win solution for all the concerned stakeholders—water security and better livelihood for farmers, easing of the massive financial burden on the state and the electricity utility, and benefits to the public at large through job creation and lower emissions. Our analysis considers a three-pronged approach consisting of (i) grid-interactive solar PV (photovoltaic), (ii) energy efficient pumps (EE), and (iii) advanced irrigation technology (AI) at the farm level. It makes policy recommendations for a successful implementation of this approach.
Promoting Massive Renewable Energy (RE) Projects
towards achieving Sustainable Development in Nigeria
Taiwo Benjamin
Carleton University, Canada
Presented at #naee2015
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
5. Contents
Acronyms and abbreviations����������������������������������������������ii - iv
Background �������������������������������������������������������������������������� 1 - 4
Renewable Energy Technologies Applications
1 Heating
Solar thermal – water heater �����������������������������������������������������6
Solar/wind desalinator �������������������������������������������������������������14
Solar thermal pasteurizer����������������������������������������������������������28
Solar food dryer ������������������������������������������������������������������������38
Solar water purifier �������������������������������������������������������������������46
Solar space heating system ������������������������������������������������������56
2 COOLING
Solar air-conditioning system �������������������������������������������������68
Geothermal cooling system �����������������������������������������������������78
3 COOkING
Solar cooker �������������������������������������������������������������������������������88
Biogas digester ��������������������������������������������������������������������������98
Improved biomass cook stove������������������������������������������������108
4 MECHANICAL
Wind water pump��������������������������������������������������������������������120
Solar photovoltaic water pump ���������������������������������������������132
Solar aerator�����������������������������������������������������������������������������142
Appendix I: Bibliography�������������������������������������������������������������152
6. ii | Renewables Beyond Electricity
AcronymsAbbreviations
AC Alternating Current
AFPRO Action For Food Production
AHU Air Handling Units
ALRI Acute Lower Respiratory Infection
ASHRAE American Society of Heating, Refrigerating Air-Conditioning Engineers
BARC Bhabha Atomic Research Centre
BEE Bureau of Energy Efficiency
BGFP Biogas-Fertilizer Plants
BIS Bureau of Indian Standards
BTU British Thermal Units
CAGR Compound Annual Growth Rate
CDM Clean Development Mechanism
CEA Central Electricity Authority
CEEW Council on Energy, Environment and Water
CERC Central Electricity Regulatory Commission
CFA Central Financial Assistance
CMSCRI Central Salt Marine Chemical Research Institute
COD Chemical Oxygen Demand
COP Coefficient of Performance
COPD Chronic Obstructive Pulmonary Disease
CPSC Concentrated Parabolic Solar Cooking
CSP Concentrated Solar Power
CSR Corporate Social Responsibility
DC Direct Current
DNES Department of Non-Conventional Energy Sources
DNI Direct Normal Irradiation
DO Dissolved Oxygen
DST Department of Science Technology
ECBC Energy Conservation Building Code
ED Electrodialysis
EER Energy Efficiency Ratio
ETC Evacuated Tube Collectors System
ETHP Evacuated Tube Heat Pipe System
FPC Flat Plate Collector
FRP Fibre Reinforced Plastic
GHG Greenhouse Gas
GIAN W Gujarat Grassroots Innovations Augmentation Network - West
GoI Government of India
GRIHA Green Rating for Integrated Habitat Assessment
7. iiiRenewables Beyond Electricity |
GSHP Ground Source Heat Pump
GW Gigawatt
GWP Global Warming Potential
HDPE High Density Polyethylene
HP Horsepower
HVAC Heating, Ventilation, and Air Conditioning
ICVIT Indo-Canadian Village Improvement Trust
IFC International Finance Corporation
IGBC Indian Green Building Council
IIT Indian Institute of Technology
INCCA Indian Network on Climate Change Assessment
INR Indian Rupees
IPCC International Panel on Climate Change
JNNSM Jawaharlal Nehru National Solar Mission
Kg Kilogram
kPa Kilopascal
KVIC Khadi Village Industries Commission
kW Kilo Watt
LEED Leadership in Energy Environmental Design
Lpd Litres Per Day
LPG Liquefied Petroleum Gas
MDMP Mid Day Meal Programme
MED Multi-Effect Distillation
MEH Multi-effect Humidification
MNRE Ministry of New and Renewable Energy
MoEF Ministry of Environment Forests
MoSPI Ministry of Statistics and Programme Implementation
MSF Multi-Stage Flash Distillation
MT Million Tonnes
MVC Mechanical Vapour Compression
MW Megawatt
MYT Multi-Year Tariff
NABARD National Bank for Agriculture and Rural Development
NAP National Afforestation Programme
NAPCC National Action Plan on Climate Change
NATCOM National Communication
NBC National Building Code
NBMMP National Biogas and Manure Management Programme
NGRI National Geophysical Research Institute
NIF National Innovation Foundation
8. iv | Renewables Beyond Electricity
NPBD National Program on Biogas Development
NPIC National Programme on Improved Chulhas
NSSO National Sample Survey Organization
NZEB Net-Zero Emission Buildings
OM Operation Maintenance
ORP Operational Research Programme
PV Photovoltaic
RD Research and Development
RCC Reinforced Cement Concrete
RE Renewable Energy
REEEP Renewable Energy and Energy Efficiency Partnership
RO Reverse Osmosis
RPM Revolutions Per Minute
SD Solar Distillation
SODIS Solar Water Disinfection
SRI System of Rice Intensification
SVNIT Sardar Vallabhbhai National Institute of Technology
TDS Total Dissolved Solids
TERI The Energy Resources Institute
TR Tons Refrigeration
TVC Thermal Vapour Compression
USA United States of America
VAM Vapour Absorption Machines
VC Vapour Compression
VRF Variable Refrigerant Flow
WWF World Wide Fund for Nature
11. 3Renewables Beyond Electricity |
E
nergy has been unanimously acknowledged as one of the most important
building blocks for economic growth and human development of a nation.
Energy security and accessibility has become a major issue globally; especially
in developing countries. Internationally, efforts have been made by respective
governments and international aid agencies to improve the conditions through
devoted programmes, schemes and financial aids. Yet, nearly 2.7 billion people all
over the world are dependent on traditional biomass energy sources (wood, straw,
charcoal, dung) for satisfying their energy needs.
India’s case is not too different. Nearly 81 million (32.8 per cent) households do
not have access to electricity (Census of India, 2011). Around 74 million rural
households lack access to modern lighting services (TERI, 2013) and a larger
proportion of the population (around 840 million) continue to be dependent on
traditional biomass energy sources (IEA, 2011).
The risk of climate change impacts due to increasing atmospheric GHG
concentrations further compounds the issue. Thus, there is an urgent demand for
nations to move towards low carbon development. This transition is bound to have a
significant influence on the energy planning of the country.
Evidently, sustainable energy has become one of the most important developmental
challenges for India. In recent years, renewable energy has increasingly attracted the
attention of the public and policy-makers, particularly with regard to providing clean
and modern energy access to the population and at the same time mitigating GHG
emissions. Towards this end, India has embarked on various ambitious renewable
energy programmes. One such programme, the National Action Plan on Climate
Change (NAPCC), was launched by the Government of India in 2008. NAPCC
suggested that starting 2009-10, a target 5 per cent renewable-based electricity
injection be set in the national grid, to be increased by 1 per cent each year for 10
years thereby setting a cumulative goal of 15 per cent to the total national energy
mix generated from renewable energy sources by 2020. This clearly indicates that
renewable energy is now no longer an “alternate” to conventional energy, but is
integral to the nation’s energy issues.
In the last 10 years, the installed capacity of grid-connected renewable energy-based
power generation has increased from just 3475 MW i.e. 2 per cent in 2002 of the
total installed capacity in the country to 12.3 per cent (27541 MW) as on 31 April
2013, with wind power contributing nearly 70 per cent (19,051 MW). Apart from
wind-based energy, since the inception of JNNSM solar-based energy production
has witnessed tremendous growth. India’s cumulative installed solar (on grid and off
grid) capacity has crossed the 2 GW milestone.
Thus, it is evident that renewable energy is being explored extensively as a potential
source for reliable and secure power supply, although there is urgent need for a more
robust financing ecosystem to channel more investments in grid-connected projects
(CEEW and NRDC 2012).
While the current policies and activities are focusing on power generation through
renewables, there is a need to look at potential applications of renewable energy
beyond electricity generation. The potential of renewables, particularly for heating,
cooling, cooking and mechanical applications would greatly enhance the acceptance
of renewables amongst the masses. There is substantial scope for use of renewables in
providing energy to people both on a small-scale as well as on a larger scale.
12. 4 | Renewables Beyond Electricity
Decentralised and distributed models of energy are being experimented with across India.
Recent research reveals that there are more than 250 firms operating across the country offering
a range of decentralised energy solutions (CEEW 2013). These firms sell products, integrated
systems, set up mini grids for electricity generation, or develop technologies for other
productive activities. It is important to recognise that the huge unmet needs of energy services
are driving a surge of innovation in technologies, delivery systems, investment and revenue
models, and most importantly community involvement. These trends are encouraging for
two reasons: first, they demonstrate that market-based solutions can be developed to fulfil the
energy needs of the poor; and secondly, they empower individual households and communities
to take control of their energy destinies.
The report “RE+
: Renewables beyond electricity” is a compendium comprising innovative
renewable energy applications, pilot projects and novelty in technologies and business
models. These 14 innovative cases bring out the experiences of different stakeholders such as
entrepreneurs, developmental agencies and non-governmental agencies in exploring the diverse
applications to which renewable energy can be utilized at the rural, urban and industrial levels.
The applications documented in this report cover four sources of renewable energy —biomass,
wind, geothermal, and solar energy. The report documents a wide variety of renewable energy
applications and technologies, such as improved biomass cook stoves, biogas digesters, solar
space heating and cooling system, solar photovoltaic water pump, solar pasteurizer, solar
desalinator, wind water pumps and so forth from different parts of the country, which have
been successfully installed.
Using the descriptive analysis, the authors have examined these 14 different renewable energy
applications. This analysis looks at each application with respect to different parameters such as
technology, cost, market potential and policy scenario. Furthermore, the report dwells on the
issue of various bottlenecks/gaps that need to be overcome for replication of these applications
on a larger scale. Lastly, this report documents case studies of actual applications on ground
that helps for a better understanding of renewable energy applications. These case studies have
been compiled from various organizations and open source documents.
15. 7Renewables Beyond Electricity |
1
Solarthermal-waterheater
Heated water finds its application in bathing, cooking, cleaning, as boiler feed water, laundry
and so forth. Solar thermal – water heaters are one of the most commonly used applications of
solar energy in day-to-day life which can heat water up to 80°C on a sunny day (MNRE)1
. It has
very minimal maintenance costs and can help reduce the recurring cost of electricity incurred
by an electrical geyser. In fact, a solar thermal- water heater can potentially provide heated
water free of cost and pay the initial investment back in few years.
It is estimated that India has a gross potential of 140 million m2
of collector area and a reliable
techno-economic potential of 35-40 million m2
of collector area (MNRE)2
. The Ministry of New
and Renewable Energy is aggressively promoting solar thermal – water heaters through many
financial incentives. In addition, many state governments have also started providing benefits
to those who deploy solar thermal - water heating systems. MNRE has certified 99 channel
partners for off-grid and decentralized solar thermal systems. There are 160 and 63 approved
manufacturers for Evacuated Tube Collector based solar systems and Flat Plate Collector based
solar systems respectively (MNRE, 2013a) (MNRE, 2013b), (MNRE)3,4
.
TechnicalDescription
The three different types of solar systems that may be used to heat water are:
• Flat plate type (FPC)
• Evacuated tube type (ETC)
• Concentrated type solar system
The output of a solar system is measured according to the volume of hot water per day. A 100
(lpd) litre per day system is assumed to be adequate for a family of four. The efficiency of FPC
systems is in the range of ~50% and for ETC it is ~31% (Jain Irrigation)5
. The efficiency of
concentrated type solar systems may vary according to technology though it is typically higher
than the FPC and ETC systems. A concentrated system developed by Clique Solar based on
Fresnel technology may have an efficiency of 50-80 per cent, but may depend on many factors
(Kedare, 2006).
Flat plate or evacuated tube type solar systems are generally used for applications with a
temperature requirement in the range of 60 to 80°C and can therefore be deployed across India.
A flat plate collector consists of a metallic box (absorber) with channels and tubes to carry
water and is covered with a glass sheet. The heat absorbed by the metallic box is transferred to
the flowing water (Delhi Transco Limited)6
.
An evacuated tube solar system consists of double-layered borosilicate glass which is evacuated
to provide insulation. The outer wall of the inner tube is coated with a selective absorbing
material which absorbs the sun’s rays and transfers the heat to the water flowing in the inner
tube.
A concentrated solar thermal system produces heat from sunlight by focusing the direct
insolation component using lenses or mirrors. Systems with trackers allow it to follow
1 http://mnre.gov.in/file-manager/UserFiles/brief_swhs.pdf
2 http://mnre.gov.in/file-manager/UserFiles/potential_electricitysSavings_swhs.pdf
3 http://mnre.gov.in/file-manager/UserFiles/list_fpc_manufacturers.pdf
4 An accredited channel partner can submit the project proposal directly to MNRE and apply for subsidy,
whereas approved manufactures may have to submit a project proposal through state nodal agency (state ministry for
renewable energy) to apply for subsidy.
5 http://www.jains.com/Solar/jain%20solar%20water%20heater%20ETC%20type.htm
6 http://www.delhitransco.gov.in/EnergyEfficiency/SOLAR%20WATER%20HEATER-ENGLISH%20.pdf
16. movement of the sun during the day. Presently MNRE is promoting two types of technology,
a Scheffler dish with an automatic East-West tracker and ARUN concentrated dishes based on
Fresnel technology which can completely track the sun (MNRE)7
.
Solar concentrator systems should typically be employed in arid areas with clear skies. This
increases the fraction of direct radiation in the solar insolation. States like Rajasthan, Gujarat
and Maharashtra have favourable conditions for the implementation of concentrated solar
systems (Ramachandra, 2011). There are very few examples of successful implementation of hot
water systems through concentrated solar systems.
ApplicationMarket
Presently over 7.27 million meter square collector area is installed in India (MNRE, 2013c). It is
estimated that India has a potential of 35-40 million m2
of collector area and the country aims
to deploy 15 million collector area by 2017 and 20 million m2
by the end of the National Solar
Mission in 2022 (MNRE, 2010).
The estimated use of solar water heater region may vary according to location and need. An
indicative use of solar water and their savings electricity units is given below.
Table 1: Estimated use of solar water heaters in India
Northern
Region
Eastern
Region
Southern
Region
Western
Region
Expected number of days of
use of hot water per year
200 200 300 250
Expected number of units of
electricity saved per year
1,000 1,000 1,500 1,250
Source: (MNRE)8
CostSubsidy
The central government and a few state governments provide subsidy for solar thermal systems.
The benchmark cost since May 2013 is as follows:
Table 2: MNRE subsidy on solar thermal systems
Type of System Category Benchmark Cost
per sq meter
(INR)
Subsidy (30% of
benchmark subject
to the maximum of)
(INR)
ETC Domestic 8,500 2,550
Commercial 8,000 2,400
FPC Domestic 11,000 3,300
Commercial 10,000 3,000
Concentrator with
manual tracking
- 7,000 2,100
Concentrator with
single axis tracking
- 18,000 5,400
Concentrator with
double axis tracking
- 20,000 6,000
7 http://mnre.gov.in/file-manager/UserFiles/Brief_Solar_Steam_generating_Systems.pdf
8 http://mnre.gov.in/file-manager/UserFiles/faq_swh.pdf
17. 9Renewables Beyond Electricity |
Note: 1. Below 500 lpd are categorized as domestic systems and above 500 lpd are categorized
as commercial systems.
2. Soft loans at 5 per cent interest rate are available for 50 per cent of the total system costs.9
States categorized as special category receive 60 per cent subsidy. They are Himachal Pradesh,
Jammu Kashmir, Uttarakhand, and the North-eastern states including Sikkim.
Source (MNRE, 2013d) (MNRE, 2013e) (NABARD, 2013)
A solar water heating system may last for up to 15 years and does not require regular
maintenance. Problems such as leakages can be repaired by common plumbers. In case of hard
water corrosion, de-scaling of collectors once every few years may be required.
Payback of a system may vary according to location, operational hours and external support
from the government. A solar system may have a payback period of 3.3 to 4.5 years without any
external support and with 30 per cent central subsidy the payback period may reduce to 2.5-3.5
years (CEEW, 2012)10
.
PolicyScenario
MNRE provides financial support either through capital subsidy, loan at 5 per cent interest
rate for 50 per cent of the benchmark cost. Some states and municipalities provide additional
incentives in the form of capital subsidy, monthly electricity rebate or tax rebate in property tax
(MNRE)11
. A few states which provide additional incentives are:
• Capital subsidy: Chandigarh, Chhattisgarh, Delhi, Haryana, Jharkhand, Jammu
Kashmir, Kerala, Madhya Pradesh and West Bengal.
• Rebate in electricity: Jammu Kashmir, Rajasthan, Karnataka and Uttarakhand.
• Rebate in property tax: A few municipal corporations of Maharashtra provide
additional rebate on property tax.
Benefits
A 100 lpd (litre per day) solar system abates carbon dioxide emission by over one tonne
annually (CEEW, 2012). When operational, a 100 lpd system can potentially replace a 2 kW
electric geyser for 2.5 hours, saving five units of electricity. Installation of one million such
systems can potentially save 1200 million units electricity each year. Assuming that 50 per cent
of such systems are switched on at the same time, a peak load shaving of 1000 MW can be
achieved (MNRE)2
.
Constraints
Despite a low payback period, solar water heating systems do not seem an attractive option
to customers. Lack of awareness, declining quality due to cost pressures and high transaction
costs in securing subsidies decrease the rate of uptake of solar hot water systems. Other factors
such as international price fluctuations in raw products (copper, aluminium, iron and steel)
and rupee devaluation (since many components including tubes for ETC solar collectors are
imported from China) have led to an increase in the cost of solar systems (CEEW, 2012).
9 To avail a soft loan, a customer will have to provide 20 per cent of the overall cost.
10 Additional financial support from state governments can reduce the payback periods further.
11 http://mnre.gov.in/file-manager/solar-thermal-newsletter/voloume-1-issue-8/EN/freatureStory.php
20. 12 | Renewables Beyond Electricity
CaseStudy:
Rooftopsolarwaterheatersatnationallaw
university,Delhi12
National Law University, Delhi is one of the seventeen national law colleges in India. It was
established in 2008 and is located in Dwarka, New Delhi.
The university decided to install solar thermal - water heaters to meet the hot water
requirements for bathing, cooking and cleaning of dishes in student hostels and guest houses.
Solar hot water systems were installed at two undergraduate hostels, one postgraduate hostel
and one guest house. The hot water was required for four months in the case of bathing and
throughout the year for kitchen purposes.
TechnicalDescription
Solar water heaters based on FPC technology were installed on the rooftops of the hostels.
Sixteen systems of capacities ranging from 200 to 2000 lpd were installed at the university. The
cumulative capacity of the systems was 25,700 lpd.
ProjectDescription
National Law University offers a five-year undergraduate degree and a two-year postgraduate
degree in law and with an intake of 80 and 25 respectively. The total capacity of students is 450.
There are 24 bathrooms in graduate student hostels in all with four bathrooms to a floor. A
2,000 lpd system meets the requirement of six bathrooms.
The breakups of installation at various hotels are:
Table 3: Breakup of capacity
Building
System Capacity
For use in bathrooms For use in kitchen
Boys Hostel 2000 x 4 1000
Girls Hostel 2000 x 4 1000
Postgraduate student hostel 2000 x 2 500
Guest House 1500 x 2 200
Source: (GKSPL, 2011)
12 The information was collected from a study ‘Market Assessment of Solar Water Heating Systems In Five
Potential States/NCR Region’ done by Greentech Knowledge Solutions Private Limited in 2011 with some additional
calculations.
21. 13Renewables Beyond Electricity |
Cost
The total cost was INR 5 million at a cost of INR 195 per litre. The return on investment (RoI)
in this particular instance is expected to be in five-six years compared to a longer RoI on
electrical geysers.
Benefits
These systems are interconnected which helps them cater to the needs of other bathrooms
should there be an increase in demand. An electrical backup has also been provided to meet the
higher demand for water heating during cloudy days.
While designing the system, a capacity of 40 lpd for hot water per student was assumed. Sixteen
solar hot water systems with a cumulative capacity of 25,700 litres per day were installed at the
hostels and guest house. A 100 lpd solar thermal water heater can save around INR 1,300,000
by avoiding usage of 257,000 units of electricity on an annual basis13
.
Constraints
Few systems have recorded lower than expected temperatures of their heating units due to the
close proximity of collectors and insufficient sunlight due to walls. However the system was able
to meet the demand of hot water on most occasions.
13 It has been assumed that a 100 lpd system is operational for 200 days in northern region of India; the cost
per unit is assumed to be INR 5. The savings may go up if the cost per unit of electricity is increased. Also, it is difficult
to estimate the number of electrical geysers which may have been installed if the solar system was not deployed,
because electrical geysers are of different types and can operate anytime with electricity. Hence it may not be correct
to compare the number of electrical geysers that may have been replaced. A calculation on savings of electricity
can give a better picture.
23. 15Renewables Beyond Electricity |
2
Solar/winddesalinator
Seawater desalination has been recognized as a potential solution to India’s limited freshwater
reserves and an ever-increasing demand for it by the country’s burgeoning population.
According to TERI, it has been estimated that “of 575,000 Indian villages, about 162,000
struggle with brackish or contaminated water and scarcity of fresh water” (TERI)14
. Coastal
areas in particular are struggling with severe salinity ingress due to excessive pumping of
groundwater. A large section of India’s urban and rural population reportedly consume water
with TDS (total dissolved solids) levels of about 1500 to 2000 mg/litre which is well above
permissible limits (specified by BIS) (TERI)15
.
Desalination is a process by which dissolved minerals (including salts) are removed from
seawater or brackish water16
. Conventional desalination processes (powered by fossil fuels)
require large quantities of energy. Therefore, coupling renewable energy sources such as solar
and wind with desalination systems is the most promising option especially in remote and arid
regions which lack access to grid electricity or face severe power outages.
The first largest solar distillation plant for desalination was installed by Central Salt Marine
Chemical Research Institute (CSMCRI), Bhavnagar to supply drinking water in Awania village
and Chhachi lighthouse in 1978 (Arujnan et al., 2009). At present, several RD efforts on solar
desalination technologies, with the support of Indian RD institutions such as Bhabha Atomic
Research Centre (BARC), CMSCRI, and IITs as well as international institutions/donors
(outlined in Table 4) are being undertaken across the country in an effort to commercialize
solar/wind desalination technologies (solar based desalination in particular). Table 4 outlines
some of the key players in solar desalination in India.
Table 4: Key players/actors in solar desalination
Category Key players
Private companies/
NGOs
KG Design Imperial Inc; Taylormade Solar Solutions (TSS) Pvt.
Ltd.; Gerindtech; Photon Energy Systems; Jal Bhagirathi Founda-
tion; Claro Ventures; Kotak Urja; Saurya Enertech; NRG
RD institutions Central Salt Marine Chemical Research Institute (CSMCRI);
Bhabha Atomic Research Centre (BARC); Department of Science
Technology (DST); The Energy and Resources Institute
(TERI); Solar Energy Centre (SEC); IIT – Madras; IIT-Delhi;
Sardar Vallabhbhai National Institute of Technology (SVNIT);
International compa-
nies, donors and re-
search institutes
Aqua-Aero Water Systems; Fraunhofer Institute; GIZ; Heriot
Watt University, U.K.; Mage Water Management; Acumen Fund;
Japan-based Hitachi, ITOCHU Corporation and Singapore-based
Hyflux Ltd
Government MNRE
Source: CEEW compilation
14 http://www.teriin.org/index.php?option=com_contenttask=viewid=62
15 Water is fresh when its total dissolved solids (TDS) concentration is below 500 mg/L as per Bureau of In-
dian Standards (BIS) specifications. Salinity, in some cases, is expressed by the water’s chloride concentration, which
is about half of its TDS value
16 Seawater is having a total dissolved solids (TDS) concentration of about 35,000 milligrams per litre (mg/L)
and brackish water has a TDS concentration range between 1,000 mg/L and 10,000 mg/L.
24. 16 | Renewables Beyond Electricity
TechnicalDescription
All desalination processes contains three liquid streams – the saline feedwater which is the
brackish water or seawater; the low salinity product water; and brine (also called reject water)17
.
Currently available conventional desalination technologies can be categorized as follows (Table 5):
Table 5: Categorization of desalination technologies
Process Principle Application of the principle
Phase change/
thermal
processes
Involves distillation process involving heating
the feed (seawater, brackish water or other
impaired waters) to boiling point at the oper-
ating pressure to produce steam, and condens-
ing the steam in a condenser unit to produce
freshwater.
Solar distillation (SD); Multi-
effect distillation (MED);
Multi-effect humidification
(MEH); Multi-stage flash
distillation (MSF); Mechanical
vapour compression
(MVC) and thermal vapour
compression (TVC)
Non-phase
change/
membrane
Involves separation of dissolved salts from the
feed waters by mechanical or chemical/electri-
cal means using a membrane barrier between
the feed (seawater or brackish water) and
product (potable water).
Electrodialysis (ED) and
reverse osmosis (RO)
Hybrid processes Involves combination of phase change and
separation techniques (as in the case of non-
phase change processes) in a single unit or in
sequential steps to produce pure or potable
water.
Membrane distillation (MD);
Reverse osmosis combined
with MSF or MED processes.
Note: The Multi Stage Flash (MSF) process is divided into sections or stages in which saline water is
heated at the boiling temperature between 90 and 110 C°, with decreasing pressure through the stages.
Similar to MSF, Multi Effect Distillation (MED) is a multi-stage process variant in which vapour from
each vessel (stage) is condensed in the following vessel and vapourized again without the need to supply
additional heat unlike MSF.
Multiple Effect Humidification involves use of heat from highly efficient solar thermal collectors to induce
multiple evaporation/condensation cycles.
In Vapour Compression (VC) distillation process, the heat for water evaporation comes from
compression rather than from direct heating. This process is generally used in combination with other
processes (MED) to improve overall efficiency.
In the Reverse Osmosis (RO), the seawater pressure is increased above the osmotic pressure, thus
allowing the desalinated water to pass through the semi-permeable membranes, leaving the solid salt
particles behind.
Electrodialysis technology is usually limited to brackish feedwater.
Source: (Gunde et al., 2010)
17 Brine is a concentrated salt solution (with more than 35,000 mg/L dissolved solid) that must be disposed care-
fully
25. 17Renewables Beyond Electricity |
The above mentioned conventional fossil-fuel driven desalination systems can be coupled with
renewable energy (RE) sources such as solar/wind. The best coupling of RE with desalination
systems is determined by various criteria, such as the required quantity of potable water (plant
capacity); feedwater salinity; remoteness; the system’s efficiency; the investment and operational
cost; type and potential of the local renewable energy resource; as well as availability of
operational personnel; the possibility for future increase of the system capacity and so forth.
Various combinations of renewable energy sources and desalination systems have been
proposed and implemented, each one with its own characteristics and suitability under certain
criteria. This study found that desalination systems driven by solar power are the most frequent
RE desalination plants in India.
Solardrivendesalinator
a) Solar distillation: Solar distillation
deploys solar stills for desalination.
A solar still consists of a shallow
triangular basin and deploys
evaporation/distillation in a single
chamber for purifying water. The
bottom of the basin is painted black
for effective heat absorption and the
basin’s top is covered with a transparent
glass tilt to ensure the passage of maximum
solar radiation. The outlet is connected with
a storage container as shown in Figure 1
(GEDA)18
. Both small and large scale solar
distillation plants deploying solar stills have
been implemented in the country since
1970s and have also undergone series of
technological improvements since then
(Arjunan et al., 2009). The construction
of a solar still is simple and involves low
operation and maintenance rigours. Typical
still efficiency of 35 per cent with a low
productivity of 3–4 L/m2
and large area
requirements are two factors that prevent
large-scale applications of solar stills
(Gunde et al., 2010). It is noteworthy that
productivity of solar stills can be improved
by integrating them with a solar concentrator (for example, single basin coupled with flat
plate collectors) (Arjunan et al., 2009).
18 http://geda.gujarat.gov.in/applications_solar_stills.php
Source: (SolAqua)19
(GEDA)18
Figure 1: Solar Stills
19 http://www.solaqua.
com/solstilbas.html
19 http://www.solaqua.com/solstilbas.html
26. 18 | Renewables Beyond Electricity
b) Solar thermal collectors/Concentrated Solar Power (CSP):20
Solar collectors
capture solar irradiation and can be classified into two categories based on concentration
ratios – (i) non-concentrating type primarily used for low temperature applications such as
space/water heating (for example - flat plate collectors are often used for distillation); and
(ii) concentrating type solar collectors (example parabolic troughs, dish, heliostat collec-
tors are used in CSP for power generation). CSP plants can be integrated either with RO
(utilize electricity) or thermal desalination units (for example, MSF and MED that utilize
steam) (Gunde et al., 2010). Furthermore, CSP can be coupled with thermal storage, and/or
hybridized with coal/natural gas which enables them to operate in limited or in the absence
of solar radiation. Such features make CSP plants a viable alternative for seawater desalina-
tion (IRENA-ETSAP, 2012). Table 6 provides the possible combinations of solar collectors
with various desalination technologies (Gunde et al., 2010)
Table 6: Possible combinations of solar collectors with desalination technologies
Type of solar collector Source of salt water Desalination process
Direct solar Seawater, brackish water Solar stills
Flat panel collectors Seawater MED
Evacuated tube collectors Seawater MSF/TVC
Parabolic trough collectors Seawater MED
Photovoltaic thermal
collectors
Seawater, brackish water MED
Source: (Gunde et al., 2010)
In October 2012, KG Design
Services together with
Empereal Inc. commissioned
India’s first CSP-powered
desalination plant using
Linear Fresnel technology in
Ramanathapuram district of
Tamil Nadu. Empereal KGDS
considers Linear Fresnel
technology suitable for solar
thermal applications like
desalination, especially in
the Asian and Indian context
due to factors such as: simple
and reliable system because
of the single axis tracking of
reflectors and fixed receivers;
cost-effectiveness and land-
efficiency. These advantages drive the selection of Linear Fresnel technology for applications
ranging in output temperature from 110˚C to 450˚C (CSP Today)21
.
20 CSP plants use collectors to concentrate (focus) irradiation/heat and convert it into steam that drives a
turbine for generating electrical power.
21 http://social.csptoday.com/emerging-markets/executive-viewpoint-manoj-divakaran-president-coo-empere-
al-inc#sthash.nHIKT0ny.dpuf
Figure 2: A solar -seawater desalination plant in
Ramanathapuram district of Tamil Nadu
Source: (CSP Today)21
27. 19Renewables Beyond Electricity |
c) Solar photovoltaic (PV) modules: Photovoltaic (PV) technology can be connected
directly to reverse osmosis (RO) or electrodialysis (ED) desalination processes, which are
based on electricity as the input energy (IRENA-ETSAP, 2012). The potential combination
of solar PV power with RO has generated growing interest because of its inherent simplicity
and low specific energy consumption. The cost of PV modules has declined in the past few
years which makes solar PV powered desalination systems an attractive option (Gunde et
al., 2010). Capital and operational costs (regular replacement of RO membranes) associated
with solar PV-RO can be offset by: building a solar PV-RO system without a battery and
integrating hybrid processes such as solar PV – RO/ultrafiltration/nanofiltration that can
lead to lower specific energy consumption(Gunde et al., 2010).
Wind-baseddesalination
In a wind driven desalination
system, the electrical and
mechanical power generated
by a wind turbine can be used
to power desalination plants,
notably RO and ED desalination
units, and vapour compression
distillation process (in
particular, mechanical vapour
compression, MVC). In general,
wind power based desalination
can be a promising option for
seawater desalination, especially
in coastal areas with a high
wind potential. However, wind
powered seawater desalination
units are still to be reality in
India (IRENA-ETSAP, 2012).
ApplicationMarket
India has about 53,000 habitations with salinity greater than 1500 mg/litre, most being remote
and arid areas with saline water (TERI, 2013)14
. Most places in India suffering from salinity lie
in high radiation zones—5.4 to 6.4 kWh/m2
(annual average). The problem of water scarcity is
more pronounced during the summers but at that time desalination systems also become more
effective since solar insolation is higher than average.
For rural and urban municipal water applications, solar desalination technologies such
as distillation, multiple-effect dehumidification, reverse osmosis requiring smaller capex
investments is more appropriate. Not every part of India can benefit from a CSP solution
because locations need to have adequate direct normal irradiation (DNI) levels. As far as
application for solar desalination of industries is considered, the technological advances
achieved for the municipal water applications can be evaluated on economic grounds (the
overall economics of the water treatment process) and accordingly extended for industrial
Figure 3: Wind powered desalination
Source: www.ecofriend.com
28. 20 | Renewables Beyond Electricity
application. Affordability of reuse/disposal is also an important factor that should be taken into
account.
Wind powered desalination can be a promising alternative for India’s coastal areas due to the
high availability of wind resources in Tamil Nadu, Gujarat, Maharashtra, Andhra Pradesh,
Karnataka. More specifically, wind energy can be used efficiently on condition that the average
wind velocity is above 5 m/s). Table 7 shows that significant research is being undertaken
and pilots are being implemented in an effort to improve, reduce costs and commercialize
desalination through solar thermal multi-effect humidification (MEH), solar stills and solar
PV reverse osmosis. There was no data suggesting the implementation of wind powered
desalination pilot/demonstration projects in India.
Table 7: Status of solar/wind desalination technologies/projects in India
Solar/wind desalination technologies/projects Status
Solar stills with better efficiency and increased output
(7L/day) – CMSCRI
Not commercialized yet; trials
to be conducted in remote
areas of Rajasthan, Madhya
Pradesh, Gujarat, Ramesh-
waram, Sunderbans and
northern regions of India.
CMSCRI has filed for a provi-
sional patent
Water Pyramid in Kutch (Gujarat) and Roopji Raja
Beri in Barmer district (Rajasthan) - Aqua-Aero Water
Systems BV (Netherlands); Acumen Fund (US) and Jal
Bhagirathi Foundation
Under operation
Solar thermal (multi-effect humidification) demonstra-
tion plant in Bitra Island, Lakshwadeep – MNRE GIZ
Under operation
75 MGD desalination plant at Dahej, Gujarat (touted
to be Asia’s largest desalination plant once it is opera-
tional)
Under development
Solar thermal (multi-effect humidification) pilot plant
in Chennai (MiniSal 1000 project) – Mage Water
Mangement
Under operation
Solar thermal (Linear Fresnel) plant in Ramanatha-
puramdistrict, Tamil Nadu – KG Design Services and
Empereal Inc.
Commissioned in 2012
Swajal Aqua pilot project using solar RO purification
technology – developed by Saurya Enertech (funding
from REEEP) in villages of Khoda and Behrampur, U.P.
Under operation
Flat-plate collector-based solar desalination system in-
stalled at the Solar Energy Centre, Gual Pahari, Gurgaon
– TERI
Under operation
Multi-stage evacuated solar desalination system – IIT
Madras and Heriot Watt University, UK
Experimental stage
Solar powered RO plant at Sardar Vallabhbhai National
Institute of Technology, Surat
Under operation
Solar/Wind PV RO desalination – BARC Not commercialized yet
Source: CEEW compilation
29. Costs
The economics of a solar/wind desalination system differ from conventional plant economics
since it is almost entirely based on the fixed costs of the system. There are no fuel costs for
the system. Site-specific aspects, which also have a significant impact on final costs, include
feedwater transportation, freshwater delivery to end-users, brine disposal and the size of the
plant. In general, desalination based on renewable energy sources is still expensive compared to
conventional desalination, because both investment and generation costs of renewable energy
are higher. However, with the rapid decrease of renewable energy costs, technical advances and
increasing number of installations, renewable desalination is likely to reduce significantly its
cost in the near future (CSP Today)21
.
Solar stills for individual use are the cheapest amongst solar desalination technologies.
Basin-type solar stills with an output of 2.0-2.5 litres of water at a time cost INR 5000. The
desalination plant – “Water Pyramid”, in village – Roopaji Raja Beri having a capacity of 1000
L/day costs INR 1.5 lakh (The Hindu, 2009). The plant has a capacity to produce 1,000 litres of
safe drinking per day. The solar thermal - MiniSal 1000 (MEH technology) with a daily capacity
of 1000L costs about EUR 15,000 (approximately INR 1,257,746) (Global Solar Thermal
Energy Council, 2010)22
. The Dahej project in Gujarat (capacity 75 MGD), which is under
development is expected to cost INR 2,000 crore. The proposed cost of the water from the
Dahej solar desalination plant is likely to be INR 40 per 1,000 litres (The Indian Express, 2013).
PolicyScenario
MNRE subsidy applicable for solar PV-RO units: The “off-grid and decentralized solar
applications scheme” of the Jawaharlal Nehru National Solar Mission (JNNSM) also covers
solar PV powered RO plants (SPV plant of maximum capacity of 250 Wp each). The MNRE
extends capital subsidy to the eligible project developer. The entire funding under this scheme
is project-based and requires submission of a detailed project report (DPR) to avail capital
subsidy. MNRE provides a combination of 30 per cent capital subsidy of the benchmark cost
and/or 5 per cent interest bearing loans to the eligible project (MNRE)23
. Capital subsidy of 90
per cent of the benchmark cost is available for special category states i.e. those in the northeast,
Sikkim, JK, Himachal Pradesh and Uttarakhand.
Table 8: MNRE subsidy on solar thermal systems
Type of System Category Benchmark cost
per m2
(INR)
Subsidy (30% of
benchmark subject
to the maximum of)
(INR)
Evacuated tube collector
(ETC)
Domestic 8,500 2,550
Commercial 8,000 2,400
Flat plate collector (FPC) Domestic 11,000 3,300
Commercial 10,000 3,000
Concentrator with
manual tracking
- 7,000 2,100
Concentrator with single
axis tracking
- 18,000 5,400
Concentrator with
double axis tracking
- 20,000 6,000
22 Assuming 1.00 EUR = 83.8 INR
23 http://mnre.gov.in/file-manager/UserFiles/jnnsm_spv_mini_grid_plants.pdf
30. 22 | Renewables Beyond Electricity
Note: 1. Below 500 L/day are categorized as domestic systems and above 500 L/day are
categorized as commercial systems.
2. Soft loans at 5 per cent interest rate are available for 50 per cent of the total system costs.
States under the special category receive 60 per cent subsidy. They are Himachal Pradesh,
Jammu Kashmir, Uttarakhand, and the north eastern states including Sikkim.
Source: (MNRE, 2013a) (MNRE, 2013b) (NABARD, 2013)
Policy support for wind powered desalination through MNRE programme on Small Wind
Energy and Hybrid Systems: The objective of the programme is to develop technology and
promote applications of water pumping windmills and aerogenerators/wind-solar hybrid
systems. The programme extends support to the following activities:
• Central financial assistance (CFA) for setting up water pumping wind mills and
aerogenerators/wind solar hybrid systems
• Field trials and performance evaluation
• Grid connected SWES on demonstration basis
• Research Development
However, it is noteworthy that as per the 2013 amendment to the programme, central financial
assistance (CFA) is confined only to community users as per specifications outlined in Table 9
(MNRE, 2013c). MNRE support for installation of aerogenerators is confined to a maximum
capacity of 10 kW (project capacity) (MNRE, 2013c).
Table 9: Central financial assistance (CFA) for wind pumps
Type of Windmill Maximum MNRE support
General Area Island
Direct drive gear-less wind-
mills such as Modified 12 PU
500 and similar other wind-
mills
INR 20,000 INR 30,000
Gear type windmill INR 30,000 INR 50,000
AV55 Auroville type windmill INR 45,000 INR 80,000
Source: (MNRE, 2010)
Pilot projects: Government of India is promoting renewable powered desalination technologies
through pilot demonstration projects. As part of ComSolar Project, MNRE in collaboration
with GIZ has undertaken a demonstration pilot project to set up a 10,000 L/day solar water
desalination plant at Bitra Island of Lakshadweep facing a severe shortage of drinking water
for its small population. The desalination plant demonstrates a solar and waste heat-assisted
water desalination system at Bitra using an efficient Multiple-effect Humidification (MEH)
Desalination Technology which is low on energy demand and maintenance. Co-financing for
this project is being done by GIZ and the Department of Science Technology, Lakshadweep24
.
24 ComSolar project is a part of ComSolar Project to enhance Cooperation among German and Indian project
developers to demonstrate business models for commercialization of solar technologies in India and technology trans-
fers through Public Private Partnerships.
31. 23Renewables Beyond Electricity |
Benefits
The most vital impact of desalination on the environment is that it reduces the pressure on
conventional water resources and emission of greenhouse gases (GHG). Solar/wind powered
desalination systems can offset costs and negative environmental repercussions of conventional
desalination systems driven by fossil fuels such as diesel. For example, solar desalination plant
in Bitra, Lakshadweep offsets the expenditure incurred on importing large amounts of diesel
(used in conventional method of desalination) and on transportation of fresh water from
neighbouring areas. Further, it curbs air or sound pollution, requires minimum maintenance
and offers constant power generation efficiency throughout its lifetime.
The social benefits of solar desalination projects, especially in water scarce areas with poor
income households is brought out in Roopaji ki Beri where villagers no longer face the
ignominy of stealing water from neighbouring villages after the installation of ‘water pyramid’
(The Hindu, 2009).
Constraints
In India, desalination plants driven by solar power (both PV and CSP) have seen a wider
uptake as opposed to wind-based desalination systems. Intermittent nature of solar/wind
energy source a drawback for desalination systems powered by these sources. Although
RO desalination is simple with use of PV modules, the rechargeable batteries used to store
the produced electricity require high capital costs and periodic maintenance. Problems
encountered with batteries include their premature failure, leaks in the lead-acid batteries
and battery efficiency. It is important to further technology advancements in order to develop
low cost storage solution for desalination considering high costs associated with battery (for
electrical storage) and thermal storage.
For the operation of a wind-powered desalination plant, it is most important to have a plant
that is insensitive to repeated start-up and shutdown cycles caused by sometimes rapidly
changing wind conditions. Coupling of a variable energy supply system, to a desalination unit
requires either power or demand management, and there is not much experience on it in India.
However, the prospects of this combination are high mainly due to the low cost of wind energy.
34. 26 | Renewables Beyond Electricity
CaseStudy:
SolarpoweredROplantbyBarefootCollegeat
Kotrivillage,Rajasthan25
Barefoot College is a non-governmental organization that has been involved in offering basic
services and sustainable solutions to alleviate problems of rural communities with the objective
of making them self-sufficient. These ‘Barefoot solutions’ can be broadly categorized into the
delivery of clean water, solar electrification, education, livelihoods and activism.
On 3 September, 2006, Barefoot College implemented India’s first ever solar powered Reverse
Osmosis (RO) plant for desalination at a small voluntary organization called Manthan located
in Kotri, a small village in Ajmer district of Rajasthan (Figure 4). Kotri is located ten miles
away from Sambhar lake, a large saltwater lake faced acute drinking water shortage. Nearly
100 villages with a population of over 250,000 surround the lake, where villagers earn their
livelihoods by way of manufacturing (pumping salty water of TDS as high as 18,000 ppm
from open wells to salt pans for
evaporation) and marketing salt.
There are around 150 open wells
spanning an area of 1800 km2
with highly brackish water (TDS
ranging from 3000-4000 ppm)
unfit for drinking purposes.
With the potable sources of water
having dried up in the area, water
pumped from open wells and
supplied through pipelines had
high TDS concentration and
was too brackish to consume or
use for cooking and cleaning.
Consumption of this water led to
skin ailments and stunted growth
25 Information collected from secondary sources
in children as well as gradually
began to render the soil infertile for
agricultural use.
Figure 4: Barefoot College’s solar RO desalination unit,
Kotri, Rajasthan26
Source: (Barefoot College)27
The Barefoot College had collaborated with the scientists from the Central Salt Marine
Chemical Research Institute (CSMCRI) to design this small desalination that could be managed,
repaired and operated by members of the rural community (Barefoot College)27
. CSMCRI
installed the plant and trained two Barefoot College solar engineers to operate and maintain it.
The plant meets the drinking water needs of around 3,000 men, women and children from Kotri
and its surrounding villages.
26 Information for this case study has been collated through secondary research.
27 http://www.barefootcollege.org/solutions/water-old/
25 Information collected from secondary sources.
35. 27Renewables Beyond Electricity |
TechnicalSpecification
Brackish water from Sambhar Lake is supplied to village through the government pipelines
which is pumped through the solar-RO desalination plant and stored in a 5,000 litre tank. The
plant is made from components that are simple and locally available: a booster pump, a sand
filter, motors, pressure gauges, valves, a cartridge and a carbon filter that prevents waste and
impurities from mixing with the desalinated water. It is noteworthy that the membrane (for
carrying out reverse osmosis) was sourced from CMSCRI.
The RO plant runs on a 2.5-3 kilowatt power solar PV plant that allows it to produce 600 litres
of water per hour for six hours each day.
Benefits
The RO plant reduces salinity levels/TDS from 4,000-6,000 ppm to only 450 ppm, making
the water clean and safe for consumption. Even though Kotri already receives electricity from
the traditional electric grid, the coverage is erratic and rarely powers the village for more than
three hours per day. For this reason, the plant was solar electrified to ensure an uninterrupted
supply of electricity for six hours, with some power to spare for a computer, a STD booth, a
solar workshop, fans and light (six in number). The power produced from this plant also serves
farmers engaged in used for shearing of wool. The biggest advantage from the implementation
of this desalination plant has been that solar PV RO installations can be managed seamlessly by
people/communities with minimal technical help.
Cost
The cost of installing this solar powered mini-RO plant was INR 1.5 million with financial
aid from MNRE (Barefoot College)28
. Each family receives 40 litres of potable drinking water
every day for a token fee of INR 10 per month.
28 http://www.barefootcollege.org/solutions/water-solutions/solar-powered-reverse-osmosis-ro-water-
desalination-plants/
37. 29Renewables Beyond Electricity |
3
Solarthermalpasteurizer
Contamination of raw milk can cause multiple diseases. Pasteurization is a process to destroy
bacteria by heating milk to a specific temperature for a set period of time and then immediately
cooling it to a lower temperature. If solar energy is used to generate heat, it is called solar
pasteurization.
During large-scale milk pasteurization, the milk is heated through the thermal energy from
heaters or boilers. The source of thermal energy may be electricity, fossil fuels or solar. India
being the largest producer of milk, solar pasteurization can play an important role in reducing
the dependence on fossil fuels for heating (GKSPL, 2012). Solar energy has been widely used
by dairies in India to heat water but application of solar energy to pasteurize milk is still in its
infancy as well as demonstration phase. There are multiple methods to pasteurize milk, few of
them are:
Table 10: Types of Pasteurization
Type Temperature (°C) Time
Vat Pasteurisation 63 30 minutes
High temperature short time
Pasteurisation (HTST)
72 15 seconds
Ultra Pasteurisation (UT) 138 2 seconds
Source: (IDFA, 2009)
Mahanand dairy, Latur, Maharashtra was the first dairy in India to replace the conventional
furnace oil boiler with a solar system. It has the capacity to pasteurize 30,000 litres of milk and
a day-long energy storage capacity. The system was developed by Clique Solar with support
from IIT Bombay and the Ministry of New and Renewable Energy (Kedare, 2006). Later a
similar system was also installed at Chitale Dairy in Sangli Maharashtra. Greentech Knowledge
Solutions Private Limited has prepared a detailed project report for milk pasteurization at
Dudhmansagar Dairy, Manesar, Haryana. MNRE has accredited 99 organizations for non-
concentrated solar thermal applications and seven organizations for concentrated solar thermal
applications (MNRE, 2013a) (MNRE, 2013b)
TechnicalDescription
The three different types of solar systems that can be used to heat water are: Flat Plate
Collectors, Evacuated Tube Collectors and Concentrated Solar Thermal System. These have also
been used for processes such as milk pasteurization.
Flat plate collectors are mostly used for cleaning and boiler feed water heating. A similar system
is to be installed at Himachal Milkfed Dairy, Mandi, Himachal Pradesh. It will replace the diesel
option for preheating the boiler feed water and will be used for cleaning purposes. The cost of
the system is estimated to be INR 2 million with a three year payback. This process can help
save up to 14,000 litres of diesel every year (GKSPL, 2012).
Dudhmansagar Dairy at Manesar, Haryana is in the process of deploying a hybrid system of
evacuated solar collector with a waste heat recovery system to pasteurize milk. It is estimated
that the system would cost INR 10.7 million with a payback of one year and can save up to 820
kg of furnace oil per day (GKSPL, 2012).
38. 30 | Renewables Beyond Electricity
A concentrated solar thermal system will use the heat produced to boil the water and generate
steam which is used for milk pasteurization. A system based on Scheffler technology comprises
parabolic solar collectors which are aligned in an east-west direction. There are receivers at the
focus which are connected to a pipe which carries the water. The heat is absorbed by water and
is converted into steam (MNRE)29
.
ARUN, a concentrated solar system based on Fresnel technology, tracks the movement of the
sun on both the axes to capture the maximum possible amount of heat. The heat is concentrated
on the focus with a receiver and is transferred for its use. A Scheffler concentrated solar system
which may typically comprise of six dishes each of 16 m2
can generate 150 to 200 kg of steam
and can potentially save 4,500 litres of diesel per year (MNRE)29
.
Presently there are no known examples of ETC or FPC systems being deployed by dairies for
the pasteurization of milk.
ApplicationMarket
The organized sector processes about 15-20 per cent of the total milk production (GKSPL,
2012). States like Gujarat and Rajasthan and parts of Maharashtra, Madhya Pradesh, Andhra
Pradesh, Karnataka and Tamil Nadu have favourable conditions for large-scale implementation
of concentrated solar systems (NREL, 2010). Though the system may still be installed at other
locations but the size and cost of the system may increase. Gujarat and Rajasthan produced ~18
per cent of the total milk in 2011-12 (NDDB, 2013).
Table 11: State wise Milk Production in 2011-12
State Milk Production
Uttar Pradesh 22,556
Rajasthan 13,512
Andhra Pradesh 12,088
Gujarat 9,817
Punjab 9,551
Maharashtra 8,469
Madhya Pradesh 8,149
India (Total) 127,904
Only a handful of dairies have implemented solar systems to pasteurize milk. While there are
many players who provide solar thermal solutions, the only known examples are of Clique Solar
which has implemented milk pasteurization systems in two dairies as of now.
A Fresnel concentrated solar system named ARUN has been built by Clique Solar with trackers
has an aperture area of 169 m2
may have an efficiency of 50 to 80 per cent at an operating
temperature of 200 to 300°C. It has the capacity to process 20,000 to 30,000 litres of milk daily;
however systems with smaller capacities have also been developed (Kedare, 2006). The cost of
the system is estimated at approximately INR 5 million with an average payback period of five
to six years (Energetica India, 2012).
29 http://mnre.gov.in/file-manager/UserFiles/Brief_Solar_Steam_generating_Systems.pdf
Source: (NDDB, 2013)
39. 31Renewables Beyond Electricity |
CostandSubsidy
The central government and a few state governments provide subsidy for solar thermal
systems based on the size of the collectors. MNRE does not provide subsidy for balance of
system. The benchmark cost since May 2013 is as follows:
Table 12: Benchmark cost and subsidy for solar thermal systems in India
Type of System Category Benchmark Cost
per m2
(INR)
Subsidy (30% of
benchmark subject
to the maximum of)
(INR)
ETC Domestic 8,500 2,550
Commercial 8,000 2,400
FPC Domestic 11,000 3,300
Commercial 10,000 3,000
Concentrator with
manual tracking
- 7,000 2,100
Concentrator with
single axis tracking
- 18,000 5,400
Concentrator with
double axis tracking
- 20,000 6,000
Note: 1. Below 500 lpd are categorized as domestic systems and above 500 lpd are
categorized as commercial systems.
2. Soft loans at 5 per cent interest rate are available for 50 per cent of the total system costs30
.
States under the special category receive 60 per cent subsidy. They are Himachal Pradesh,
Jammu Kashmir, Uttarakhand, and the north eastern states including Sikkim.
Source: (MNRE, 2013c) (MNRE, 2013d) (NABARD, 2013)
Payback of solar thermal systems may vary according to technology and location of the
system. It is estimated that an ETC based solar pasteurizer system may have a payback of one
year whereas a system based on Fresnel collectors may have a payback of three to four years
(GKSPL, 2012) (Energetica India, 2012).
PolicyScenario
Presently there are about 7.27 million m2
of solar collectors installed in India and MNRE
aims to install 20 million m2
of solar collectors by 2022 (MNRE, 2010) (MNRE, 2013e). The
Indian government also aims to install 225 solar thermal systems of 250 m2
of collected area
for process heat applications by 2017 (Planning Commission, 2012).
MNRE provides financial support for solar thermal systems either through capital subsidy,
loan at 5 per cent interest rate or accelerated depreciation (CEEW, 2012). The support
is however calculated on the collector area and is not available on the balance of the
system. MNRE had financially supported IIT Bombay and Clique Solar in 2004 to develop
concentrated solar thermal solutions for milk pasteurization at Mahanand Dairy in Latur,
Maharashtra.
30 To avail soft loan, a customer will have to provide 20 per cent of the overall cost.
40. 32 | Renewables Beyond Electricity
The Project Management Unit of MNRE has recently sanctioned a demonstration project for
the milk pasteurization system at Salem District Co-operative Milk Producers Union Ltd in
Tamil Nadu (MNRE, 2013d).
Benefits
Solar thermal systems reduce the amount of fossil fuels being used and hence reduce GHG
emissions. However such savings would highly depend on the operating hours, system capacity
and the fuel it replaces. A concentrated solar pasteurizer based on ARUN technology which
pasteurizes 20,000 to 40,000 litres of milk per day may save from 15,000 to 30,000 litres of oil
per year and may save up to 50 to 200 tonne of CO2
emissions. It is also estimated that the
system can save up to 6-10 per cent of India’s oil import bill (Kedare, 2006).
A solar concentrator system with 96 m2
of dish area, based on Scheffler technology can
potentially generate 150 to 200 kg steam per day and save 4,500 litres of diesel in a year
(MNRE)29
.
Constraints/Bottlenecks
Despite attractive payback periods, very few organizations provide milk pasteurization
solutions. This may be attributed to lack of expertise and experience for large scale solar
thermal application and high upfront costs. Few of the reasons are (GKSPL, 2012):
• Lack of awareness about possible solar energy applications and economics
• Limited number of suppliers for solar thermal solutions to dairies
• Few existing installations for reference
• High upfront cost
42. 34 | Renewables Beyond Electricity
CaseStudy:
ConcentratedsolarhotwatersystembyClique
SolarPvt.Ltd.atMahanandDairyinLatur,
Maharashtra31
Clique Solar, a Mumbai-based organization has installed a concentrated solar hot water system
at Mahanand Dairy in Latur, Maharashtra. The system has been in operation since February
2006.
Clique Solar are MNRE channel partners and provide solar thermal solutions for applications
in industrial process heating, cooling, cooking, desalination and effluent treatment through
their indigenously manufactured ARUN systems.
The system was sponsored by the Ministry of New and Renewable Energy and was developed
by Clique Solar with testing support from IIT Bombay.
TechnicalDescription
The ARUN systems consist of Fresnel parabolic reflectors with point focus. The receiver at the
focus point is designed in a manner to minimize thermal loss. An insulated pipeline is provided
which delivers this heated energy for use. An inbuilt tracker helps the system to track the path
of the sun and operate at its peak capacity for eight to 10 hours a day.
ProjectDescription
The aim of the project was to develop, design, fabricate, install, commission and test a large
solar concentrator for generating process heat at about 200°C, store it and supply it at desired
process temperature (Kedare, 2006).
During the day, the system heats the inlet water to an ambient temperature and sends it to the
insulated storage tank. The pressurized water tank stores the hot water for use when required
for milk pasteurization. The used water is returned back at lower temperature and is re-heated
by parabolic dish (Clique Solar)32
.
A few challenges were faced while developing the project. Storage was a major issue since most
of the milk pasteurization takes place within three hours and solar energy is available for only
eight to 10 hours. Hence a storage system in the form of insulated pressurized water storage
tank was designed and integrated with the system. Pressurized water was selected as the storage
medium since it has high specific heat, is not a fire hazards, is compatible with food products
and has low operational costs.
31 Based on information provided by Clique Solar and other publicly available documents
32 http://www.cliquesolar.com/DairyIndustry.aspx
43. 35Renewables Beyond Electricity |
The key features of the system are as follows:
Table 13: Key features of ‘ARUN 160’
Parameter Output
Delivery Upto 18 bar and 180°C
Thermal power (annual average) 50-80 kWth
Dish numbers 1
Aperture area 160 m2
Arial space required 25 x 20 x 18 m height
Foot print 3 x 3 m
Daily energy output 6 lakh k cal
Dry saturated steam (per day) 1,200 kg
Hot water (@65°C) 25,000 litres
Milk pasteurization 30,000 litres
Source: (Clique Solar)33
Figure 5: Flow of operation at Mahanand Dairy
33 http://www.cliquesolar.com/Arun160.aspx
Source: (Clique Solar)32
44. 36 | Renewables Beyond Electricity
Figure 6: ‘ARUN 160’ at Mahanand Dairy
Source: (Clique Solar)32
Cost
A solar driven milk pasteurizer based on ‘ARUN 160’ may cost approximately INR 5 million.
The cost decreases with support from MNRE as capital subsidy and through accelerated
depreciation. A system has an operational lifetime of 20 to 25 years with a payback period of
three to four years (Energetica India, 2012).
Benefits
An ‘ARUN 160’ system can reduce the dependence on fuel and lead to reduction in carbon
dioxide emissions.
Table 14: Savings from ‘ARUN 160’ on a clear sunny day
Parameter Saving
Effective saving of fuel per day 80 - 100 litres
Effective saving of electrical energy per day 800 kWh
Average CO2
emission saving per annum 60 -70 tons
Source: (Clique Solar)33
45. 37Renewables Beyond Electricity |
Constraints:
Challenges such as high upfront costs and a handful of installations often discourage dairies
and other users to adopt technology.
47. 39Renewables Beyond Electricity |
4
Solarfooddryer
Crops are dried to preserve food quality, enhance storage life, minimize losses during storage
and to reduce transportation costs of agricultural products (Purohit, 2006).
Those crops with high moisture content are susceptible to fungal infections, attack by insects,
pests and increased respiration (Dhiwahar, 2010). Open drying of crops underneath the sky is
an age-old practice; however recently crops have been dried in ovens using wood or fossil fuels.
The former highly depends on weather fluctuations, is unhygienic and time-consuming and;
the latter is expensive and pollutes the atmosphere.
Solar crop dryer offers an attractive alternative since it uniformly dries the crops, is more
efficient and less expensive (VijayaVenkataRaman, 2012).
TechnicalDescription
Solar food dryers are broadly classified according to exposure of product to sunlight (direct/
indirect type) or on their air flow movement (passive/active type).
In a direct type solar food dryer the product is exposed to direct solar radiation whereas in
an indirect type solar dryer the product is kept in a closed chamber. A passive solar dryer
induces air through a natural force whereas electrically powered fans and blowers (mostly solar
powered) are used to produce air current in an active dryer.
Direct solar food dryers act as a greenhouse. The product to be dried is kept in a cabinet with
a blackened interior, covered with a transparent sheet. The air enters the cabinet from the
bottom and escapes from an exit at the top. Solar radiation hitting the transparent surface either
gets reflected or transmitted inside the cabinet. The component which is transmitted inside is
either reflected by the crop surface or absorbed by it. This leads to an increase in temperature
of the crop leading to a long wavelength emission, which cannot escape due to the glass cover.
Hence, the glass cover serves an important purpose for reducing the convective losses to the
atmosphere which helps in increasing the crop and the cabinet temperature. However such
dryers have their limitations such as their small capacity, crop discoloration because of direct
exposure to sunlight and insufficient rise in crop temperature.
In indirect solar food dryers, the product to be dried is located in shelves inside an opaque
cabinet. The cabinet is attached to a solar collector (a separate unit for heating the air). The
heated air flows from collector to the product container and provides the required heat for
moisture evaporation. This method offers better control over the process (leading to an increase
in product quality); attainment of higher temperature and greater efficiency.
In passive solar food dryers, the heated air is circulated naturally with buoyant force or wind
pressure or in combination of both. This type of drying is common in small agricultural
communities due to its low cost, simplistic design and ease of operation. Active solar dryers
incorporate external means like fans or pumps for transporting the heated air from the
collector area to dry beds. These dryers are generally used for large-scale commercial drying
operations and are hybridized with conventional fossil fuels (Visavale, 2012).
48. 40 | Renewables Beyond Electricity
Table 15: Examples of crops dried in active and passive solar dryers
Passive solar dryer Active solar dryer
Banana Papaya
Pineapple Kiwi Fruit
Mango Brinjal
Potato Cabbage
Carrots Cauliflower slices
The capacity and output of a solar food dryer depends heavily on the design of a solar dryer
which in turn depends on need, crop and its properties and the prevalent atmospheric
conditions. However, the capacity may be in the range of 50-500 kg/batch of crop (Unisol)34
. It
is generally assumed that moisture removal of 3kg/m2
may be possible in dry areas.
The efficiency of a dryer may vary according to local conditions, crop, design and moisture
content. However, the average efficiency of the dryer may be taken as 25 per cent (Purohit,
2006).
ApplicationMarket
India is a large producer of the dried and preserved vegetables like preserved and dehydrated
onions and dehydrated garlic flakes. Dried and processed vegetables have a share of 40 to 42
per cent (in terms of volume and by value) in the processed product export. In 2012-13, India
exported INR 833.55 crore (133.45 thousand MT by weight) of dried and preserved vegetables
(APEDA, 2013).
The price difference between a raw product and dehydrated product is shown below:
Table 16: Price difference in raw and dehydrated products
Product Raw
INR cost/kg
Dehydrated
INR cost/kg
Onion 50 100
Garlic 200 350
Grapes 80 150
Fish 250 500
Also, it is expected that India loses approximately 33 million tonnes of vegetables and fruits
every year due to lack of storage, transportation and processing facilities (IPS, 2013). A solar
dryer can be easily operate for 290 days in a year in India and help farmers in India to process
their produce (Sreekumar, 2013)(Chandak et al., 2013).
34 http://www.solarheater.co.in/solar-dryer.html
Source: (Visavale, 2012)
Source: (Science for Society, 2013)
49. 41Renewables Beyond Electricity |
CostSubsidy
The cost of a solar food dryer may vary according to technology, capacity and required
application. A solar dryer with a flat plate collector may cost approximately INR 5000 to 10,000
per m2
and will be on the higher side in the case of active solar food dryers. A low cost solar
dryer has recently designed by an Indian NGO Science for Society. The price is in the range of
INR 3,000 to 3,500 which is one-third of the price of conventional solar food dryers.
The cost of drying may vary according to the product, for instance it is estimated that the per
unit cost of solar food dryers may be INR 3.72/kg for coffee whereas it may be INR 22. 53/kg
for garlic flakes (Purohit, 2006).
A solar food dryer may have two to four years of payback with minimal maintenance and may
last for up to 15 years (MNRE)35
. The government offers 30 per cent subsidy to a maximum
limit of INR 3,600 /m2
for the solar collector system for direct heating applications (MNRE,
2012a).
PolicyScenario
MNRE has been supporting a programme to deploy solar air heating system with flat plate
solar collectors. As of now 2000 m2
of collectors areas have been installed at various locations
in the country. There have been installed at various industries which require air temperature in
the range of 50-80°C for the drying of both edible and non-edible products. Many small and
large fish drying systems have also been installed at Kerala and Manipur under this programme
(MNRE, 2012b).
Presently MNRE does not have any specific standards for solar food drying technology and
puts the onus of the system quality on the customer. However it does list names of eight
manufacturers/institutions of flat plate collector-based solar food driers and provides financial
subsidy to individuals who aim to buy these systems (MNRE)36
(MNRE, 2012a).
Benefits
A solar food dryer not only saves energy but also saves time, improves the quality of product,
requires less area, makes the process more efficient, reduces losses (due to deterioration
and transportation delays) and protects the environment by replacing fossil fuels
(VijayaVenkataRaman, 2012).
Table 17 compares the component of the drying cost in the overall price, the internal rate
of return and a breakeven price for different products according to the 2005-06 price level.
A lower fraction of drying costs, higher internal rate of return and higher breakeven price
suggests financial attractiveness to deploy a solar dryer system, which means that it may
be financially viable to deploy a solar food dryer system with a cost of INR 39,000 to dry
cardamom with a 205 per cent IRR.
35 http://mnre.gov.in/file-manager/UserFiles/solar_energy_potential_in_industries.pdf
36 http://mnre.gov.in/file-manager/UserFiles/list_ahs.pdf
50. 42 | Renewables Beyond Electricity
Table 17: Comparison of benefits against sun drying in 2006
Product Fraction of drying
cost in the wholesale
selling price
Internal rate of return Breakeven price
of collector
(INR/m2
)
Coffee 9% 38% 7,963
Onion Flakes 23% 17.9% 4,692
Garlic Flakes 32% 8.2% 3,262
Chillies 22% 7.24% 3,139
Tea 8% 44.85% 9,168
Cardamom (Small) 2% 205.8% 39,796
Pepper 7% 49.44% 10,026
Note: All the calculations above were done according to prices in 2005-06. The prices of most of
the products have risen and the cost of solar dryers has come down, hence a lower fraction in
the overall cost and a higher rate of return may be observed in the present date.
Source: (Purohit, 2006)
Constraints
Despite low cost and attractive payback in terms of improved sales and reduction in loss, solar
food dryers are not popular among farmers. Lack of awareness among users, the practice
of open sun drying, absence of good technical information and dearth of local practical
experience proves to be a hurdle which in turn proves to be an impediment for increase in
uptake of solar dryers(Purohit, 2006) (VijayaVenkataRaman, 2012).
52. 44 | Renewables Beyond Electricity
CaseStudy:
Solarconductionfooddryersby‘Sciencefor
Society’ 37
Science for Society is an NGO set up in 2009 by a group of motivated individuals from Institute
of Chemical Technology and other institutes, Mumbai. It aims to solve societal problems by
commercializing scientific innovations.
TechnicalDescription
Science for Society has invented a low cost solar food dryer which combines conduction,
convection and radiation. The system reduces the drying time by 30 to 66 per cent and
increases the nutritional value of the product by 45 per cent. The system has a self-regulatory
temperature of 60°C which is considered ideal for most food products.
It is a designed as a rectangular box with a blackened interior and a transparent lid. The
operation is very simple requiring the farmer to place sliced fruits and vegetables on the
surface, which is then dried by the heat. The system can be dismantled easily by two persons
and may prove helpful to farmers if the drying location changes seasonally.
Cost
The cost of the dryer is approximately INR 3,000 to 3,500/m2
which is one-third of the cost of a
similar conventional solar food dryer. It has an operational lifetime of 10 years and an efficiency
of 20 to 25 per cent. With no operational and maintenance requirement, it promises to pay back
the upfront cost in six months by reducing losses and increasing the product value.
A typical system with 10kg capacity and 4 m2
surface area may cost INR 10,000- INR 20,000
depending upon various models with possible a payback period of less than 100 days.
ProjectDescription
Science for Society plans to sell solar dryers to women self-help groups and empower them.
Raw materials like turmeric, ginger, amla, leafy vegetables and mushrooms are sold to them on
a regular basis. The product would be bought back after processing and would be sold in the
urban market at higher rates.
37 Based on information provided by Science for Society and other publicly available documents.
53. 45Renewables Beyond Electricity |
Figure 7: Stages of product development
First Model Low Cost Pilot version Final Product
The system was developed in collaboration with National University of Singapore and has
received recognition and accolades from UNESCO, Government of Maharashtra, IIT Bombay
and IIM Ahmedabad. In 2013, the team won the Dell Social Innovations Challenge.
The team has applied for both Indian and International patent and is closely working with
UNEP and Bayer, Germany to lower the cost, improve technology and aid in technology
transfer to other developing countries.
Benefits
It is believed that 100 such dryers can have a cumulative processing capacity 250 tonne annually
and can generate 125 jobs. Thirty driers have been installed on the ground and the team aims to
install 1,000 dryers by 2014 and 5,000 by 2015.
Constraints
Presently no subsidy has been availed from government, but presence of subsidy can make the
system financially attractive to the farmers. Lack of awareness about solar dryers often creates
hurdles for organizations which try to market such products in rural areas.
Source: Science for Society
55. 47Renewables Beyond Electricity |
SolarWaterPurifier
In India, over one lakh people die of water-borne diseases annually. It is reported that
groundwater in one-third of India’s 600 districts is unfit for drinking purposes owing to the
excessive concentration of fluoride, iron, salinity and arsenic which exceed tolerance levels
(Deccan Herald)38
. Solar water purification involves purifying water for drinking and other
purposes through the usage of solar energy in the following treatment methods: solar water
disinfection (SODIS); solar distillation; solar water pasteurization and solar power (electricity)
to drive purification technologies (reverse osmosis). Low cost solar water purification options
(such as SODIS) are particularly beneficial for rural communities since they can neither afford
the conventional expensive water purifiers nor have access to electricity to operate such devices.
Although, very few of the solar water purification technologies such as solar stills have been
around for a very long time, there are several ongoing research efforts to commercialize various
solar-powered water purification methods that can cater to both rural and urban India. For
example, Panasonic has developed a new water purification photocatalyst that does not need
to be fixed to a panel or filter which runs on solar power (specifically the ultraviolet part of the
spectrum); it plans to promote this prototype with the help of Jadavpur University, Kolkata
(The Green Optimistic, 2013). Taking cognizance of increasing water woes, various NGOs,
international companies and donor agencies have stepped in to implement solar-based water
purification pilot projects.
Table 18 outlines some of the key players in solar water purification in India
Table 18: Key players/actors in solar water purification
Category Key players
Private companies/
NGOs
Jakson Power Solutions; El-Sol Energy Systems; Panasonic;
Kotak Urja; Claro Ventures; NRG; Zero B; Deccan Water; Saurya
Enertech; Social Awareness Newer Alternatives (SANA);
Barefoot College; Synergy International; Taylormade Solar
Solutions (TSS) Pvt. Ltd.
RD institutions Bhabha Atomic Research Centre (BARC); Jadavpur University;
AN College, Patna; Delhi University (Zakir Hussain College); Mal-
lanadu Development Society; Central Salt and Marine Chemical
Research Institute (CSMCRI); Developing Indigenous Resources
(DIR); IIT; The Energy and Research Institute (TERI); Sardar
Vallabhai National Institute of Technology (SVNIT)
International
companies, donors and
research institutes
Nedap (Dutch company); Aqua Infinitum; Solvatten; Sunlabob;
Germany’s AquaSolis GmbH; Karlsruhe University of Applied
Sciences in Germany; Indo-Canadian Village Improvement
Trust (ICVIT); Pentair; International Finance Corporation (IFC);
United Nations Development Programme (UNDP); Renewable
Energy and Energy Efficiency Partnership (REEEP);
Government MNRE; Department of Science Technology (DST)
Individuals Vemula Lakshmimnarayana from Tadipatri town of Anantapur
district (designed Raqxa - Solar Water Purifier with Integrated
Storage and Automatic Supply)
Source: CEEW compilation
38 http://www.deccanherald.com/content/63740/poor-water-quality-serious-threat.html
5
56. 48 | Renewables Beyond Electricity
Technicaldescription
The following is a description of the most common methods for solar water purification.
a) Solar distillation: Solar distillation utilizes the natural process of evaporation to capture
purified water. The structure used in solar distillation is called a solar still, which utilizes
the heat from the sun to drive evaporation, and ambient air to cool the condenser film39
.
Since evaporation is the mechanism of purification, this technology is effective for the
complete removal of all chemical, organic, and biological contaminants from feedwater.
However, solar distillation using basin stills require higher amounts of solar energy for
longer periods of time (more than even solar pasteurization) and are only viable for
small-scale applications. On the other hand, solar distillation using solar collectors (with
considerably higher solar energy capture capacity) is a more viable alternative for treating
large quantities of water in a cost effective manner.
b) Solar Water Disinfection (SODIS): SODIS
is a relatively simple and cost-effective method
of providing disinfected drinking water in
small quantities utilizing sun’s ultraviolet
radiation. The process involves contaminated
water being filled in transparent PET or glass
bottles which are then exposed to the sun for
approximately six hours on a bright day or
two days under cloudy sky. The ultra violet
(UV) rays of sun eliminate the diarrhoea-
causing pathogens, thereby making the water
fit for consumption. For example, Raqxa, a
contrivance by Vemula Lakshmimnarayana
from India’s Tadipatri town of Anantapur
District uses a number of glass purification
cells (fixed to a solar panel) to contain water
for exposure up to 20 hours. Raqxa was one
among the 52 projects shortlisted for the ‘India
Innovation Initiative – i3 National Fair’ in
2010 (The Hindu, 2010).
c) Solar Water Pasteurization: Pasteurization is a thermal disinfection process which
is widely used for purifying milk but is only recently become of interest for the process
of water purification. It involves the use of moderate heat or radiation captured by solar
cookers to kill disease – causing microbes40
. Aside from cookers, heat can also be provided
through solar collectors. Water from pond/river/well water can be pasteurized by solar
thermal systems for large scale use in food industries, dairies, military or paramilitary in
remote places, small and remote villages and so forth (TSS India)41
. Solar pasteurization,
like solar distillation depends on solar energy for purifying small quantities of water for
individual or family use. Solar pasteurization can provide safe drinking water in most
cases where water does not contain contaminants such as inorganic chemical pollutants
or arsenic. While SODIS focuses on a combination of the antibacterial role of solar UV
radiation and elevated temperature, solar pasteurisation utilizes only the thermal energy.
39 Solar still has a slanted glass cover over a black-painted, water filled basin
40 Pasteurization can take place at much lower temperatures than boiling, depending on the time the water is
held at pasteurization temperature (usually 65°C-75°C) (SSWM)
41 http://www.tss-india.com/pasteurization
Figure 8: SODIS-Raqxa developed by
Vemula Lakshmimnarayana
Source: (The Hindu, 2010)
57. 49Renewables Beyond Electricity |
Solar water pasteurization for domestic use using solar cookers has not taken off in India but
has been demonstrated as a viable solar water purifying method in countries like Kenya (water
decontaminated through solar cookers) (Ray Jain, 2011).
d) Solar powered purification processes: This method integrates electricity generated from
solar energy for water purification. Solar PV panels generate power for a battery which is used
for purification systems (for example solar powered reverse osmosis, RO, for desalination).
These structures are generally mobile and can be designed in various sizes to cater to varying
needs. Solar PV – RO plant requires less energy compared to solar thermal (collectors) driven
purification processes and are techno-economically feasible for domestic and small- scale use.
Solar thermal powered desalination systems are more suited for large-scale use – villages level,
industries, institutions, and so on.
Applicationmarket
Table 19: Application status of key solar powered purification projects/systems in India
Solar Purifier Status
Solar Purifiers – based on ultra-filtration developed
by BARC
Under the process of commercial-
ization by Jakson Power Solutions;
Jakson plans to roll out 10,000 units
of solar water purifier on an annual
basis
BARC Solar RO – desalination plant Testing completed
Raqxa that deploys SODIS – developed by Vemula
Lakshmimnarayana
Tested but not been commercialized
Sunlalob (Laos based company)-SANA (Delhi NGO):
solar water purification system installed in Rajkiya
Pratibha Vikas Vidyalaya (RPVV) School in Surajmal
Vihar
Under operation
Panasonic solar powered photocatalyst Testing stage (tested by Jadavpur
University)
Solar powered arsenic removal; developed by Karl-
sruhe University of Applied Sciences in Germany;
AN College, Patna and Applied Solar in Ramnagar,
Patna
Under operation; would end in 2013
Swajal Aqua pilot project using solar RO purification
technology – developed by Saurya Enertech (fund-
ing from REEEP) in villages of Khoda and Behram-
pur, U.P.
Under operation; not been commer-
cialized
TERI-Flat plate collectors desalination unit at SEC,
Gual Pahari
Under operation
Solar powered ultra-filtration water purification
plant developed by I.C.V.I.T and Aqua Infinitum
(Switzerland)
Under operation in Hoshiarpur dis-
trict, Punjab
Source: CEEW compilation
58. 50 | Renewables Beyond Electricity
Although only a few of the community scale solar purification systems are in pilot phase and
are yet to be commercialized (evident from table 19), it is essential to spread the word about
those technologies that have forayed into the market or are on the verge of doing so (for
example, solar stills, SODIS, BARC ultrafiltration systems tailored for small-scale domestic
consumption).
Costs
Costs of solar purifiers are driven by the type of technology deployed and capacity. The
operational and maintenance costs of solar-based purifiers, except for membrane systems (such
as solar RO plant) are quite low since they operate without fossil fuel/electricity.42
The cost of
simple solar stills is the least delivering 2.0 L – 2.5 L is approximately INR 5000 whereas the
cost of a solar energy based water distillation system (manufactured by company - Deccan
Water) producing 100 L per day is around INR 90,000 per unit (The Times of India, 2010). The
cost of a solar purifier (manufactured by Zero B) with a tank capacity of 4L deploying a six-
stage purification/filtration is around INR 7,490 (Zero B)43
. International donors such as the
Renewable Energy and Energy Efficiency Partnership (solar powered RO plants in Khoda and
Behrampur villages), the IFC (providing Deccan Water a soft loan of INR 40 crore at an interest
rate of 4 per cent) Indo-Canadian Village Improvement Trust (ICVIT) (1000 L per day solar
powered ultra-filtration water purification plant in Hoshiarpur, Punjab) have provided financial
assistance in the form of subsidies or grants to drive down the cost of implementing solar
powered purification projects (The Times of India, 2010) (EAI)44
.
Policies
The off-grid and decentralized solar applications scheme of the Jawaharlal Nehru National Solar
Mission (JNNSM) also covers solar PV powered RO plants (SPV plant of maximum capacity of
250 Wp each). The MNRE extends capital subsidy to the eligible project developer. The entire
funding under this scheme is project-based and requires submission of a detailed project report
(DPR) to avail capital subsidy. MNRE provides a combination of 30 per cent capital subsidy of
the benchmark cost and/or 5 per cent interest bearing loans to the eligible project45
(MNRE)46
.
The capital subsidy scheme can only be availed by the project developer if the solar equipment
used in the project is sourced from MNRE accredited channel partners. Capital subsidy of 90
per cent of the benchmark cost is available for special category states i.e. those in the northeast,
Sikkim, JK, Himachal Pradesh and Uttarakhand.
Table 20 outlines subsidies provided by the central and state governments for solar collectors.
42 Solar driven RO systems require regular maintenance of membranes
43 http://www.zerobonline.com/uv-water-purifier.html
44 http://www.eai.in/club/users/Nithya/blogs/1154
45 For financial year 2013-14, the benchmark price for PV systems with battery back-up support is INR 170
per Wp and INR 90 per Wp for without storage battery.
46 http://mnre.gov.in/file-manager/UserFiles/jnnsm_spv_mini_grid_plants.pdf
59. 51Renewables Beyond Electricity |
Table 20: MNRE subsidy for solar collectors
Type of System Category Benchmark Cost
per m2
(INR)
Subsidy (30% of
benchmark subject
to the maximum of)
(INR)
Evacuated tube col-
lector (ETC)
Domestic 8,500 2,550
Commercial 8,000 2,400
Flat plate collector
(FPC)
Domestic 11,000 3,300
Commercial 10,000 3,000
Concentrator with
manual tracking
- 7,000 2,100
Concentrator with
single axis tracking
- 18,000 5,400
Concentrator with
double axis tracking
- 20,000 6,000
Note: 1. Below 500 L/day are categorised as domestic systems and above 500 L/day are
categorised as commercial systems.
2. Soft loans at 5 per cent interest rate are available for 50 per cent of the total system costs.
States under the special category receive 60 per cent subsidy. They are Himachal Pradesh,
Jammu Kashmir, Uttarakhand, and the north eastern states including Sikkim.
Source: (MNRE, 2013a) (MNRE, 2013b)(NABARD, 2013)
Benefits
Solar-powered water purifiers score over their conventional counterparts as they are
environmentally friendly (on account of reduced GHG emissions resulting from fossil power
usage); enable consumers to save on electricity and are particularly beneficial in areas/regions
which do not have access to grid electricity and face water scarcity.
Constraints
Increased uptake of solar water purification technologies in India is hindered by several factors
including lack of awareness; higher upfront capital costs and lack of cost-effective storage
options (example PV-RO) for countering the intermittent nature of solar energy. Portability and
ease of use are vital factors that often impact adoption of these technologies.
62. 54 | Renewables Beyond Electricity
CaseStudy:
SolarPVdrivenbattery-lessultrafiltration(UF)
unitsbyBhabhaAtomicResearchCentre(BARC)47
Bhabha Atomic Research Centre (BARC), India’s premier multi-disciplinary nuclear research
centre has been conducting various projects to test renewable energy based water purification
technologies in India over the years.
Indian company - Jakson Power Solutions has signed a technology agreement with BARC in
which it has been granted access to technology for standalone solar PV driven battery-less UF
units for water purification for a period of seven years. As per the terms of the agreement,
Jakson will use the technology to manufacture and sell these products in the Indian and
overseas markets. Jakson started manufacturing these solar-driven UF units in its facility at
Noida, Uttar Pradesh in 2013 (Jakson Power Solutions, 2013).
Technicaldescription
These water purification units are solar PV driven, battery-less, off-grid, stand-alone
Ultrafiltration (UF) systems, as shown in Figure 9. In these units, water purification takes place
by a pressure driven, membrane-based process called ultrafiltration. Electricity required for
pressurization is generated with the help of the solar PV system. These units can be operated for
nine to ten hours a day on clear sunny days. These units are capable of removing dust, turbidity
and pathogens from drinking water. The units are available in two sizes: i) 10 L per hour
capacity for domestic use and ii) 100 L per hour capacity for community use.
Source: (BARC)48
47 Based on information collected from publicly available documents.
48 http://www.barc.gov.in/technologies/pvwp/pvwp_br.html
Figure 9: BARC solar powered water purifier based on ultrafiltration
63. 55Renewables Beyond Electricity |
Application
These units are best suited for both urban as well as remote/rural areas where electricity is
not available or the voltage is not stable. The company has also lined up plans to export these
products to Africa, the Middle East and Southeast Asian countries.
Benefits
These units are compact, light-weight and portable, do not have a daily maintenance cost and
require less manpower for assembly (can be assembled by a single person).