The document summarizes Ajay Meena's industrial training at Rajasthan Electronics and Instruments Ltd. in Jaipur, India from June 10 to July 11, 2013. It provides an overview of REIL, including that it is a public sector company established in 1981 that manufactures electronic products for the dairy and renewable energy industries, such as electronic milk testers and solar photovoltaic modules and systems. It also describes the manufacturing processes for solar PV modules and some of REIL's other products and their applications.
Auto power supply control from 4 different sources using pic microcontrollerEdgefxkits & Solutions
This project is used to provide uninterrupted power supply to a load by selecting the supply source automatically from any available one out of 4 sources.
Auto power supply control from 4 different sources using pic microcontrollerEdgefxkits & Solutions
This project is used to provide uninterrupted power supply to a load by selecting the supply source automatically from any available one out of 4 sources.
Solar powered LED street light with automated power supply systemSangeeth Soman
Final Electrical engineering project report of Solar powered LED street light with automated power supply system. It is better for self project and an utiity project.
With increased competitiveness in power generation industries, more resources are directed in optimizing plant operation, including fault detection and diagnosis.
Solar tracking system, Full Report Submitted in B.Tech, Electrical & Electronics Engineering Final Year @ College of Engineering Roorkee-247667, Uttarakhand, INDIA.
Electrical safety and Arc Flash TrainingLarry Riley
This presentation is part of the OSHA Focus Four training that I do in all my Construction courses. More information you can contact me: Larry@asctraininginc.net
MicroGrid and Energy Storage System COMPLETE DETAILS NEW PPT Abin Baby
A microgrid is a localized grouping of electricity generation, energy storage, and loads that normally operates connected to a traditional centralized grid (macrogrid). This single point of common coupling with the macrogrid can be disconnected. The microgrid can then function autonomously. Generation and loads in a microgrid are usually interconnected at low voltage. From the point of view of the grid operator, a connected microgrid can be controlled as if it were one entity.
Microgrid generation resources can include fuel cells, wind, solar, or other energy sources. The multiple dispersed generation sources and ability to isolate the microgrid from a larger network would provide highly reliable electric power. Produced heat from generation sources such as micro turbines could be used for local process heating or space heating, allowing flexible trade off between the needs for heat and electric power.
In today's era of advanced technology, Artificial Intelligence has been proven as a boon for various fields. Utilization of AI in power system is the need of upcoming future.
Dear Readers,
The presentation may be helpful for those who wants to know the basic concept of paper making process.
Please post your valuable comments improve the quality of presentation.
Regards,
Nirjhar.
Solar powered LED street light with automated power supply systemSangeeth Soman
Final Electrical engineering project report of Solar powered LED street light with automated power supply system. It is better for self project and an utiity project.
With increased competitiveness in power generation industries, more resources are directed in optimizing plant operation, including fault detection and diagnosis.
Solar tracking system, Full Report Submitted in B.Tech, Electrical & Electronics Engineering Final Year @ College of Engineering Roorkee-247667, Uttarakhand, INDIA.
Electrical safety and Arc Flash TrainingLarry Riley
This presentation is part of the OSHA Focus Four training that I do in all my Construction courses. More information you can contact me: Larry@asctraininginc.net
MicroGrid and Energy Storage System COMPLETE DETAILS NEW PPT Abin Baby
A microgrid is a localized grouping of electricity generation, energy storage, and loads that normally operates connected to a traditional centralized grid (macrogrid). This single point of common coupling with the macrogrid can be disconnected. The microgrid can then function autonomously. Generation and loads in a microgrid are usually interconnected at low voltage. From the point of view of the grid operator, a connected microgrid can be controlled as if it were one entity.
Microgrid generation resources can include fuel cells, wind, solar, or other energy sources. The multiple dispersed generation sources and ability to isolate the microgrid from a larger network would provide highly reliable electric power. Produced heat from generation sources such as micro turbines could be used for local process heating or space heating, allowing flexible trade off between the needs for heat and electric power.
In today's era of advanced technology, Artificial Intelligence has been proven as a boon for various fields. Utilization of AI in power system is the need of upcoming future.
Dear Readers,
The presentation may be helpful for those who wants to know the basic concept of paper making process.
Please post your valuable comments improve the quality of presentation.
Regards,
Nirjhar.
What is Artificial Intelligence | Artificial Intelligence Tutorial For Beginn...Edureka!
** Machine Learning Engineer Masters Program: https://www.edureka.co/masters-program/machine-learning-engineer-training **
This tutorial on Artificial Intelligence gives you a brief introduction to AI discussing how it can be a threat as well as useful. This tutorial covers the following topics:
1. AI as a threat
2. What is AI?
3. History of AI
4. Machine Learning & Deep Learning examples
5. Dependency on AI
6.Applications of AI
7. AI Course at Edureka - https://goo.gl/VWNeAu
For more information, please write back to us at sales@edureka.co
Call us at IN: 9606058406 / US: 18338555775
Facebook: https://www.facebook.com/edurekaIN/
Twitter: https://twitter.com/edurekain
LinkedIn: https://www.linkedin.com/company/edureka
A seminar presentation on Solar Panel Production with brief description at Rajasthan Electronics & Instruments Ltd. (REIL) and a brief introduction of LG Electronics.
Electric Vehicle, it's types and Battery Management System_Summer Internship ...Parth Gajjar
This document explores the world of electric vehicles (EVs), highlighting the different types available and a key component - the Battery Management System (BMS).
It covers Battery Electric Vehicles (BEVs), Plug-in Hybrids (PHEVs), Hybrid Electric Vehicles (HEVs), and Fuel Cell Electric Vehicles (FCEVs). The BMS is then explained as the critical system that ensures battery safety, performance, and longevity in EVs. By understanding these core elements, readers gain a solid foundation on electric vehicle technology and its potential for a cleaner transportation future.
Past and future trends in PV Industry developmentsLeonardo ENERGY
This webinar will address the key drivers of the PV market and industry in the coming years. It will look at the past developments and future scenarios, from a global market development point of view to some key price evolution features. From competitive tenders to the development of distributed PV in China, and the arrival on the market of new industry giants, this webinar will browse the global landscape of PV development.
Circular Economy of electric vehicles (EVs) is a major priority in Europe. CarE-Service is a H2020 EU project aimes at developing new technologies and business models for re-using, remanufacturing and recycling high added-value components of EVs (batteries, metals and techno-polymers). In addition, leveraging on the benefits of circular economy, the project intends to implement new mobility services for European citizens.
Proven PV Cottage Industry in Malaysia. The production of solar panel has created jobs for local community. Unlike normal solar panel factory, high capital and heavy equipments are needed. PV Cottage can contribute in generating local economy and provide localized supply of solar panels.
1 month Summer Training Report on "Universal Axel Counter" .
in this report it's gives full description about CEL Profile and the description about universal axle counter and solar cell
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
1. INDUSTRIAL TRAINING SEMINAR
TAKEN AT
RAJASTHAN ELECTRONICS AND INSTRUMENTS LTD.
KANAKPURA, JAIPUR.
Submitted to: Submitted by:
Mr.R.C.Jain Ajay Meena
Training Coordinator B.Tech ECE
REIL Jaipur. NIT Hamirpur.
1
2. 2
Contents
• Training Overview
• Introduction
• Organization profile
• Agro electronics division
• Principle of EMT
• Technical Specifications
• Working Principle
• SPV production division
• Flow Chart for Solar panel
• Technical Specifications
• Other products
• Key learnings
• Conclusion
3. Training Overview
Industry Rajasthan Electronics &
Instrumentation Ltd,
Jaipur
Duration 10 June 2013 to 11July
2013
P&IR Head Mr. Neeraj Saxena
Training
Coordinator Mr. B. S. Chauhan
3
4. REIL is Rajasthan Electronics & Instruments Ltd. It is a public
sector unit and it has a prominent place amongst the
electronics industry of Rajasthan. It was established in 1981.
It is situated at the Kanakpura industrial area about 12 Km
from Jaipur city. REIL has joint venture between the
Government of India & the Government of Rajasthan,
through their respective institutions. Government of India
and Government of Rajasthan holds51% and 49 % share in
this company respectively.
4
Introduction
5. Rajasthan Electronics & Instruments Limited (REIL), as a
commercial organization has been in operation for the past
27 years with a proven track record of profitable
performance, professional management and service to the
rural masses through electronic products for the dairy/Milk
cooperatives and renewable energy sectors. REIL commenced
its foray in the Dairy sector with the manufacture of
Electronic Milk Testers under the technology developed
overseas by Foss, Denmark. The company entered the area of
Renewable Energy through Solar Photo Voltaic (SPV)
technology, in the year 1985. the company started its
operations with manufacture of SPVPREFACE
5
ORGANIZATION PROFILE
6. Profile Sheet of REIL
S. No. Particulars 2007 – 2008 2008 - 2009 2009 - 2010
1 Turnover & other Income 8150.84 8711.11 9913.32
2 Net Profit before Tax 405.71 148.52 199.68
3 Profit after Tax 268.22 110.87 182.64
4 Dividend (including Tax) 65.00 42.50 85.00
1
5 Fixed Assets
5.a Gross Block 1899.81 2035.21 1929.97
5.b Less depreciation 655.61 742.45 792.34
5.c Net Block 1244.20 1292.76 1137.63
6 Current Assets 4768.62 5345.70 6202.68
6.a Total Assets 6012.82 6638.46 7340.31
6.b Less Current Liabilities & Provision 2792.11 3088.23 4270.64
7 Capital employed : represented by - 3220.71 3550.23 3069.67
7.a Share capital 325.00 527.00 527.00
7. Why Solar Energy?
It is Free.
It is Clean.
It is Infinitely renewable.
It can reduce our utility cost.
It increases our energy self reliance.
It is extremely reliable.
7
8. Solar Photo Voltaic (SPV)
Modules
Connected assembly of solar cells.
Output of 0.5 - 0.6 volt DC.
Output Current depends on Area
of the cell and the amount of Light
falling.
So efficiency is determined by the
area of a module.
8
9. How PV Cells Work?
Composed of ultra-thin layer of N type silicon on top of a thicker
layer of P type silicon.
9
11. Manufacturing Process of
SPV Modules
Processes during manufacturing of SPV modules :-
Part I Part II
1. Tabbing of Cells 1. Lamination
2. Row Making 2. Curing
3. Stringing 3. Trimming
4. Lay up 4. Testing
5. Terminal Box Fitting & Soldering
11
12. Manufacturing Process
1. Tabbing of Cells
Process of making terminals of a bare cell by soldering
copper strips to the bus bar.
12
13. Manufacturing Process
2. Row Making
A row of cells is made by connecting positive surfaces of
one cell to the negative surface of another cell.
13
14. Manufacturing Process
3. Stringing
The rows of SPV cells are connected in series to get
desired power rating.
14
15. Manufacturing Process
4. Lay-up
In this process,
solar cells are
put in between
various layers
for lamination
and curing
process.
15
16. TABBING OF
CELLS
COMPONENTS
STORE
STRINGING
LAMINATION
CURING
STRING
INSPECTION
AND
REPAIRING
OK
LAY UP
TRIMMING
CHANNELLING
REGRADE
TERMINAL BOX FITTING
AND SOLDERING
GOODS
STORE
VISUAL & ELECT.
INSPECTION
FINAL
INSPECTION
OK
OK
NOT OK
FLOW CHART
17. Advantages
Can be designed for variety of applications and
operational requirements.
Have no moving parts.
Expandable.
Transportable.
The fuel (sunlight) is free.
No noise pollution or any othe type of pollution.
Requires minimum maintenance.
Have long service lifetimes (upto 20 years).
17
18. Disadvantages
High Cost.
Large Surface Area.
Doesn’t work at night.
Not reliable unless kept in a very sunny climate.
18
20. 20
Principle :-
EMT is a simple, economical but accurate milk fat testing instrument.
It measures the fat content instantaneously on a digital read out. It does not
involve the use of corrosive chemicals.Electron milk tester is based on the
photometric measurement of light scattered by the milk sample. The light
is scattered by the fat globules, acting as small prism.
Features: -
1. Auto zero facility
2. Easy to read digital LED display
3. Runs on mains or batteries
4. Measures up to 13% fat
5. Accepts small sample volume
6. Performs 120-150 test per hour
7. Automatic switch over to battery in case of power failure
8. Cheapest method of milk testing .
21. 21
• MILK IN
Working Operations
Gently mix milk sample
Place sample under milk intake
Push milk in button
• MIX OUT
Empty mix beaker
iPnlatackee mix beaker under milk
Push mix out button
• PUMP
Move mix beaker to mix intake
Raise and lower handle 3 times
• READ
Read % fat in display and record
22. 1
OTHER PRODUCTS OF REIL
• VEHICLE TRACKING SYSTEM (VTS)
• SPOT BILLING TICKET MACHINE
• SPV RAILWAY SIGNALING SYSTEM
23. 23
Applications:-
•Street lighting
•Water pumping
•Battery charging
•Railway signaling and lighting systems
•Rural radio phones and exchanges
•Portable lantern
•Power pack for village electrification
•Satellite communication
•Grid connection system
•Space energy source
24. 24
Electric power generation in space
Water pumping
27. 27
CONCLUSION
• The summer training in REIL played an important role to
develop myself. It was a golden opportunity for me to get the
practical knowledge and hands-on experience from the things
about which I had theoretical knowledge from the course
curriculum.
• As the organization follows the ISO 9001 standards, everything
is done in a particular way following the documents. In addition
I gained knowledge about the working principle of solar cells
and the various applications in which they are used.
28. 27
REFERENCES
• www.reiljp.com
• www.wikipidia.com
• http://en.wikipedia.org/wiki/Mobile_radio_telep
hone
• Material from Organization