Hani Tech Designing and manufacturing reheating furnaces on a turn-key basis for:
Rolling Mills
Heat Treatment Centers
Wire Rod Mill Plants
Rebar Rolling Mill Plants
Consulting, Design, Complete Set of Equipment and EPC
Conventional walking beam reheating furnace for large slab
◎ Regeneration and preheating combined walking beam
reheating furnace for large slab
◎ Walking beam reheating furnace for special steel bars and
quality wire rods
◎ Regeneration walking beam reheating furnace for steel bar
rolling mills and wire rod mills
◎ Conventional walking beam reheating furnace for steel bar
mills and wire rod mills
Hani Tech can provide technical services such as planning consultation, equipment integration and general contracting. Hani Tech owns unique technology and rich practical experience in the overall design of iron and steel plants, individual design for iron making, steel making, steel rolling, sintering, pelletizing, coking, industrial furnace, environment protection and integration of metallurgical equipment.
Feel free send your inquiry to stella@hanrm.com
+8615877652925
2. • Designing and manufacturing reheating
furnaces on turn-key basis for:
Rolling Mills
Heat Treatment Centers
Wire Rod Mill Plants
Rebar Rolling Mill Plants
• Guaranteed fuel consumption of as low
as 33 ltr/ton for billet reheating furnaces
Reheating Furnace
Stella Duan stella@hanrm.com
3. Services
• Hani Tech can provide technical services such as
planning consultation, equipment integration and
general contracting. Hani Tech owns unique
technology and rich practical experience in overall
design of iron and steel plants, individual design for
iron making, steel making, steel rolling, sintering,
pelletizing, coking, industrial furnace, environment
protection and integration of metallurgical
equipment.
Stella Duan stella@hanrm.com
5. Reheating Furnace
Consulting, Design, Complete Set of Equipment and EPC
◎ Conventional walking beam reheating furnace for large slab
◎ Regeneration and preheating combined walking beam
reheating furnace for large slab
◎ Walking beam reheating furnace for special steel bars and
quality wire rods
◎ Regeneration walking beam reheating furnace for steel bar
rolling mills and wire rod mills
◎ Conventional walking beam reheating furnace for steel bar
mills and wire rod mills
Stella Duan stella@hanrm.com
6. DESIGN METHODOLOGY
Capacity Rating
Material Handeling
Hearth Loading
Heat Loading & Zoning
Automation levels
Planning of Combustion
System
Stella Duan stella@hanrm.com
7. 120 t/h Reheating Furnace
for Wire Rod Mill
• Type: Top and bottom sectional heating walking beam type reheating
furnace; cantilever roller table side-in and side-out; evaporative cooling
• Fuel: Natural gas
• Heating mode: Air preheating, preheating temperature ≥ 500℃
• Form of burner: Soak section and top of heating section: flat-flame burner;
bottom of heating section: natural gas NOx adjusting flame burner
• Billet specification: 160mm × 160mm×10000mm
• Steel grades to be heated: Quality steel, alloy structure steel, pinion steel,
spring steel, bearing steel, etc.
• Dimension: Effective length of reheating furnace 19980mm; inner width of
reheating furnace 12788mmStella Duan stella@hanrm.com
9. Technical Features
◎ The combustion system is in side-combustion at bottom of the
heating section, end-combustion at top of the heating section, as well
as end combustion at both top and bottom of the soaking section
◎ The upper and lower soak section is divided into three sub-sections,
namely, left, middle and right accordingly to fully exert the
temperature controlled steel discharging of reheating furnace for
better service of rolling line system
Stella Duan stella@hanrm.com
10. Advantages
Reheating furnaces of this
project fulfilled the
requirements of direct
charging, fast rhythm and
high automation, and
finally realized fully
automatic steel discharging,
high-quality billet
reheating, good uniformity
of temperature and low
oxidizing and burning loss
of billets.
Stella Duan stella@hanrm.com
11. Contact Us
We can supply designing, manufacturing, installation, and
commissioning of the reheating furnaces equipment with a "turn-key"
service.
Upgrading your existing Bar and Wire Rod mills, to increase
production and improve efficiency and product quality, is our
specialization.
Feel free send your enquiry to stella@hanrm.com
+8615877652925
Stella Duan stella@hanrm.com