it about STAAD.Pro and its functions ,it is brief introduction to staad.pro .it will tell you history and work of staad pro. that what are the functions are used to designing structure.
This document describes the design, modeling, and analysis of a connecting rod for a four-wheeler engine using CREO and ANSYS software. It will analyze connecting rods made of different materials and select the optimal material. The connecting rod will be modeled in CREO and analyzed in ANSYS for stresses and vibrations. Results will be compared across materials to conclude the best material and design.
The project involved designing, assembling, and testing a rocket with 3D printed components. Key aspects included developing an ignition system with a seven-segment display, achieving attitude stabilization with fins, and recovering flight and video data. Testing of the rocket engine and structure was performed using simulation software like ANSYS and OpenRocket. Sensor fusion and PID control were used to measure flight motion and manipulate fin angles for stability.
This document outlines a project schedule with multiple tasks related to structural engineering for a construction project. The schedule includes tasks for load plans, concept studies, technical reviews, structural engineering management, structural outfit coordination, and tool arrangement coordination occurring from September 2019 through August 2023. Key milestones and dependencies between tasks are indicated.
The project involved designing, assembling, and testing a reusable solid rocket engine. Key aspects included:
- Developing a reusable KNSB solid rocket engine using 45 steel for parts requiring high heat dissipation.
- Establishing a 1-D mathematical model of rocket motion using MATLAB and Simulink.
- Developing a wireless ignition system based on Arduino and an RF module.
Jared Breton is seeking an entry-level position in mechanical engineering. He has a Bachelor of Science in Mechanical Engineering from Worcester Polytechnic Institute with a 3.39 GPA. His skills include CAD programs like SolidWorks and Creo Parametric. As a CAD designer, he has designed products for KettlePizza using SolidWorks. At Sparton Technology, he automated CAD models and drawings using SolidWorks and DriveWorks Xpress. For his major qualifying project, he designed a kinematic tester for a knee replacement in SolidWorks.
The document discusses the design of a tilt rotor UAV as a solution to short average flight times of 15 minutes for fixed wing drones. A tilt rotor UAV combines capabilities of helicopters and fixed wing aircraft by using tiltable rotors that allow vertical takeoff and landing like a helicopter but also forward flight like an aircraft. This hybrid design aims to develop a challenging unconventional design that does not require runways and can carry costly sensors for maximum ground visibility while achieving the range and speed of a fixed wing plane. The document outlines the conceptual design process, mathematical and computational modeling, and control strategies for hover, cruise, and transition flight modes. It provides a roadmap for further developing transition controllers, improving controllers using LQR, integrating
The document provides an overview of the AutoDISE software capabilities for construction engineering technicians. It describes AutoDISE as a modeling and simulation program that can help design, develop, and correct power, water, wastewater, network, and HVAC systems for camps. It also allows viewing cable lengths and generator fuel consumption to address space constraints and impacts of changes before construction starts. The briefing demonstrates how to build a table of organization in AutoDISE using equipment from the toolbox and power sources.
This document describes the design, modeling, and analysis of a connecting rod for a four-wheeler engine using CREO and ANSYS software. It will analyze connecting rods made of different materials and select the optimal material. The connecting rod will be modeled in CREO and analyzed in ANSYS for stresses and vibrations. Results will be compared across materials to conclude the best material and design.
The project involved designing, assembling, and testing a rocket with 3D printed components. Key aspects included developing an ignition system with a seven-segment display, achieving attitude stabilization with fins, and recovering flight and video data. Testing of the rocket engine and structure was performed using simulation software like ANSYS and OpenRocket. Sensor fusion and PID control were used to measure flight motion and manipulate fin angles for stability.
This document outlines a project schedule with multiple tasks related to structural engineering for a construction project. The schedule includes tasks for load plans, concept studies, technical reviews, structural engineering management, structural outfit coordination, and tool arrangement coordination occurring from September 2019 through August 2023. Key milestones and dependencies between tasks are indicated.
The project involved designing, assembling, and testing a reusable solid rocket engine. Key aspects included:
- Developing a reusable KNSB solid rocket engine using 45 steel for parts requiring high heat dissipation.
- Establishing a 1-D mathematical model of rocket motion using MATLAB and Simulink.
- Developing a wireless ignition system based on Arduino and an RF module.
Jared Breton is seeking an entry-level position in mechanical engineering. He has a Bachelor of Science in Mechanical Engineering from Worcester Polytechnic Institute with a 3.39 GPA. His skills include CAD programs like SolidWorks and Creo Parametric. As a CAD designer, he has designed products for KettlePizza using SolidWorks. At Sparton Technology, he automated CAD models and drawings using SolidWorks and DriveWorks Xpress. For his major qualifying project, he designed a kinematic tester for a knee replacement in SolidWorks.
The document discusses the design of a tilt rotor UAV as a solution to short average flight times of 15 minutes for fixed wing drones. A tilt rotor UAV combines capabilities of helicopters and fixed wing aircraft by using tiltable rotors that allow vertical takeoff and landing like a helicopter but also forward flight like an aircraft. This hybrid design aims to develop a challenging unconventional design that does not require runways and can carry costly sensors for maximum ground visibility while achieving the range and speed of a fixed wing plane. The document outlines the conceptual design process, mathematical and computational modeling, and control strategies for hover, cruise, and transition flight modes. It provides a roadmap for further developing transition controllers, improving controllers using LQR, integrating
The document provides an overview of the AutoDISE software capabilities for construction engineering technicians. It describes AutoDISE as a modeling and simulation program that can help design, develop, and correct power, water, wastewater, network, and HVAC systems for camps. It also allows viewing cable lengths and generator fuel consumption to address space constraints and impacts of changes before construction starts. The briefing demonstrates how to build a table of organization in AutoDISE using equipment from the toolbox and power sources.
A presentation on g+6 building by Staad pro and Autocad190651906519065
Our graduation project involves designing a hostel building with G+6 floors for 150 students using AutoCAD, STAAD Pro and Revit. The building will be analyzed for various loads including dead, live, wind, seismic and their combinations. The structural elements like beams, columns, slabs, footings will be designed as per Indian code IS 456 and software STAAD Pro.
“ANALYSIS AND DESIGN OF PRE ENGINEERED BUILDING FOR INDUSTRIAL SHED IN CHAKAN”IRJET Journal
This document summarizes the analysis and design of a pre-engineered building for an industrial shed in Chakan, India. The authors analyzed and designed the building using AutoCAD for drawings, STAAD Pro for analysis, and BO-CAD for detailing. Loads including dead, live, wind, and earthquake loads were calculated. The structural components were modeled and analyzed. Member sections were designed according to loading conditions. Detailing was performed using BO-CAD. The methodology, analysis, design, and outputs are described. The pre-engineered building design reduced construction time and cost compared to standard structures.
Analysis And Design Of G+7 Story Building Using E-tabs SoftwareIRJET Journal
This document analyzes and designs a 7-story building using ETABS software. It models the building with and without a base isolation system. Time history analyses are conducted using earthquake records to compare the seismic responses. Base isolation is found to reduce base shear, story acceleration, drift, and column/beam forces compared to a fixed base structure. The document outlines the building specifications, modeling methodology, analysis results for shear/moments, reinforcement design, and time history analysis outputs like displacement and acceleration. It concludes that base isolation improves seismic performance by decreasing seismic demands.
The document provides the structural design basis for a commercial building and Kashmiri Gate project in Delhi. It summarizes the project details, structural system, design loads considered, load combinations, material strengths, modeling and analysis software used. The building has a raft foundation and composite steel frame superstructure designed as per Indian codes for earthquake and wind loads in seismic zone IV.
The document describes the analysis and design of a multi-story hostel building with G+6 floors in STAAD Pro. It includes objectives to house 200 students, satisfy strength and serviceability requirements. The building has 16 rooms on each floor with 4 washrooms. Loads, materials, and structural components are specified. The building is analyzed for different load combinations as per codes and design of beams, columns, slab is done with reinforcement details. The analysis found the structure is within safe limits under design loads.
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PROAli Meer
This document discusses the design and analysis of a multi-storied residential building using STAAD Pro software. It includes details on the building specifications, applicable codes, loads on the structure, and the design of structural elements like slabs, beams, columns, and footings. The analysis involves assigning materials, loads, properties and performing RCC design in STAAD Pro to verify the safety and serviceability of the building according to codes. The results show the design is safe and meets code requirements. References include design codes and textbooks.
Design & Analysis of Multi Storeyed Building (G+10) By Using Stadd Pro V8i (S...IJAEMSJORNAL
The principle objectives of this project are comparison between staad-pro software and manually calculations and design a multi-storied building using STAAD Pro. The design involves load calculations and analyzing the whole structure by STAAD Pro. The design methods used in STAAD Pro analysis are Limit State Design conforming to Indian Standard Code of Practice. These involve Staad Modeling, Analysis the members due to the effect of Wind & Seismic load & Compare them for a 33 meter height Building with Concrete & Steel construction. The proposal structure is a G+10 storied building with 3.00 m as the height of each floor. The overall plan dimension of the building is 21.30 m x 14.0m.
ANALYSIS AND DESIGN OF MULTI STOREY (G+5) COMMERCIAL BUILDING BY STAAD PRO AN...Bala Balaji
This document provides a project report on the analysis and design of a multi-storey commercial building (G+5 levels) using STAAD Pro and ETABS software. The report includes an introduction, literature review on analysis methods, plan of the building, load calculations, design of beams, columns, slabs and footings. STAAD Pro is used for the 3D analysis of the building to obtain results like bending moments and shear forces. The report presents the analysis, design and results obtained from the software for various structural elements of the building.
IRJET- Planning, Analyzing and Design of High Rise Building using EtabsIRJET Journal
1) The document discusses planning, analyzing, and designing a 15-story residential building using ETABS software.
2) It describes modeling the building in ETABS, including dimensions of columns, beams, slabs and applying loads like dead, live, and seismic.
3) The analysis involved evaluating bending moments, shear forces, and drift from equivalent static analysis in ETABS to ensure structural integrity under loads.
This document describes a project to analyze and design a pre-engineered building for an industrial shed. It provides details of the building dimensions, location, and loading conditions. It outlines the methodology, which includes calculating dead loads, live loads, and wind loads. Load calculations are presented for self-weight, roofing, purlins, sheeting, live loads, and wind loads based on the building's location in Pune, India. The document also includes plans and elevations of the building and tables of material properties and load combinations that will be used in the structural analysis and design using STAAD Pro software.
This document describes a project submitted by Bedabrata Bhattacharjee and A.S.V. Nagender to analyze and design a multi-storey building using STAAD.Pro software. It includes a certificate from their professor U.K. Mishra certifying the project. The document then discusses loads considered for the building design including dead loads, imposed loads, wind loads and seismic loads. It provides background on analyzing the structure, designing based on limit state methods, and conforming to Indian code standards. The objective is to analyze a G+21 building using STAAD.Pro to understand its capabilities for high-rise structural design.
This document describes a project submitted by Bedabrata Bhattacharjee and A.S.V. Nagender to analyze and design a multi-storey building using STAAD.Pro software. It includes a certificate from their professor U.K. Mishra certifying the project. The document then discusses loads considered for the building design including dead loads, imposed loads, wind loads and seismic loads. It provides background on analyzing the structure, designing based on limit state methods, and conforming to Indian code standards. The objective is to analyze a G+21 building using STAAD.Pro to understand its capabilities for high-rise structural design.
REPORT ON G+4 RCC HOSTEL BUILDING ANALYSIS AND DESIGN USING STAAD PRO SOFTWARERakeshDas161
REPORT ON G+4 RCC HOSTEL BUILDING IN ( SEISMIC ZONE 5 ) ANALYSIS AND DESIGN USING STAAD PRO SOFTWARE
PREPARED BY RAKESH DAS AND HIS GROUP
DEPARTMENT OF CIVIL ENGINEERING
GIRIJANANDA CHOWDHURY INSTITUTE OF MANAGEMENT AND TECHNOLOGY GUWAHATI ASSAM
IRJET- Design and Structural Analysis of Multi Storey Building (Both Commerci...IRJET Journal
This document discusses the structural analysis and design of a multi-storey commercial and residential building using STAAD Pro software. It first describes analyzing the building by calculating loads like dead load, live load, and load combinations. It then details designing building components like slabs, beams, columns, and footings based on the load calculations. The analysis found the building to be safe against all loadings and deflections. The conclusion is that STAAD Pro provides accurate results and a safe structural design for the multi-storey building.
ANALYSIS AND DESIGN OF BRIDGE FOUNDATIONScott Donald
This document discusses the analysis and design of bridge foundations using structural engineering software. It begins by describing the importance of properly analyzing and designing bridge substructures. It then details the analysis of a bridge in India using Autodesk InfraWorks to model the structure and Staad Pro to analyze forces in the superstructure. Finally, it outlines the design of pile foundations in Staad Pro for the bridge based on relevant codes of practice. The document demonstrates how engineering software can help efficiently analyze and design complex bridge substructures.
“Design and modeling of commercial cum residential building by using Autodesk...IRJET Journal
This document describes the design and modeling of a commercial-cum-residential building using Autodesk Revit and StaadPro software. It involves planning and drafting the building layout in AutoCAD, developing a 3D model in Revit, analyzing the structural components using StaadPro, and comparing the results with manual calculations. The building has a ground floor with commercial shops and a first floor containing residential flats. Planning, designing, modeling and analyzing the building helps gain knowledge of using BIM and analysis software for structural design of multi-use buildings within time and cost constraints.
“Design and modeling of commercial cum residential building by using Autodesk...IRJET Journal
This document describes the design and modeling of a commercial-cum-residential building using Autodesk Revit and StaadPro software. It involves planning and drafting the building layout in AutoCAD, developing a 3D model in Revit, analyzing the structural components using StaadPro, and comparing the results with manual calculations. The building has a ground floor with commercial shops and a first floor containing residential flats. Planning, designing, modeling and analyzing the building helps gain knowledge of using BIM and analysis software for structural design of multi-use buildings within time and cost constraints.
To Analyze and Comparing a G+12 story RCC building using IS-875 (part 3)-2015...IRJET Journal
This document analyzes and compares a 12-story reinforced concrete building using the wind load provisions of IS-875 (part 3)-2015 and ASCE-07 for a basic wind speed of 50m/s using STADD PRO software. The study finds that displacements, member forces, and story drift are generally higher when designed according to IS-875 compared to ASCE-07. Specifically, node displacements in the x and z directions and bending moments in columns are higher using IS-875, while y-direction displacements and axial column forces are higher using ASCE-07. Additionally, the quantity of concrete required is larger when designed according to IS-875. The objective is to understand the differences between international and
Seminar report on Indoor Environment quality Ravi Kant Sahu
Indoor environmental quality (IEQ) refers to the quality of a building’s environment in relation to the health and wellbeing of those who occupy space within it. IEQ is determined by many factors, including lighting, air quality, and damp conditions
Case study on flash floods in the dhauliganga river 1Ravi Kant Sahu
The 2021 Uttarakhand flood began on 7 February 2021 in the environs of the Nanda Devi National Park, a UNESCO World Heritage Site in the outer Garhwal Himalayas in Uttarakhand state, India. It is believed to have been caused by a landslide, an avalanche or a glacial lake outburst flood
More Related Content
Similar to Ravi kant sahu practical training report
A presentation on g+6 building by Staad pro and Autocad190651906519065
Our graduation project involves designing a hostel building with G+6 floors for 150 students using AutoCAD, STAAD Pro and Revit. The building will be analyzed for various loads including dead, live, wind, seismic and their combinations. The structural elements like beams, columns, slabs, footings will be designed as per Indian code IS 456 and software STAAD Pro.
“ANALYSIS AND DESIGN OF PRE ENGINEERED BUILDING FOR INDUSTRIAL SHED IN CHAKAN”IRJET Journal
This document summarizes the analysis and design of a pre-engineered building for an industrial shed in Chakan, India. The authors analyzed and designed the building using AutoCAD for drawings, STAAD Pro for analysis, and BO-CAD for detailing. Loads including dead, live, wind, and earthquake loads were calculated. The structural components were modeled and analyzed. Member sections were designed according to loading conditions. Detailing was performed using BO-CAD. The methodology, analysis, design, and outputs are described. The pre-engineered building design reduced construction time and cost compared to standard structures.
Analysis And Design Of G+7 Story Building Using E-tabs SoftwareIRJET Journal
This document analyzes and designs a 7-story building using ETABS software. It models the building with and without a base isolation system. Time history analyses are conducted using earthquake records to compare the seismic responses. Base isolation is found to reduce base shear, story acceleration, drift, and column/beam forces compared to a fixed base structure. The document outlines the building specifications, modeling methodology, analysis results for shear/moments, reinforcement design, and time history analysis outputs like displacement and acceleration. It concludes that base isolation improves seismic performance by decreasing seismic demands.
The document provides the structural design basis for a commercial building and Kashmiri Gate project in Delhi. It summarizes the project details, structural system, design loads considered, load combinations, material strengths, modeling and analysis software used. The building has a raft foundation and composite steel frame superstructure designed as per Indian codes for earthquake and wind loads in seismic zone IV.
The document describes the analysis and design of a multi-story hostel building with G+6 floors in STAAD Pro. It includes objectives to house 200 students, satisfy strength and serviceability requirements. The building has 16 rooms on each floor with 4 washrooms. Loads, materials, and structural components are specified. The building is analyzed for different load combinations as per codes and design of beams, columns, slab is done with reinforcement details. The analysis found the structure is within safe limits under design loads.
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PROAli Meer
This document discusses the design and analysis of a multi-storied residential building using STAAD Pro software. It includes details on the building specifications, applicable codes, loads on the structure, and the design of structural elements like slabs, beams, columns, and footings. The analysis involves assigning materials, loads, properties and performing RCC design in STAAD Pro to verify the safety and serviceability of the building according to codes. The results show the design is safe and meets code requirements. References include design codes and textbooks.
Design & Analysis of Multi Storeyed Building (G+10) By Using Stadd Pro V8i (S...IJAEMSJORNAL
The principle objectives of this project are comparison between staad-pro software and manually calculations and design a multi-storied building using STAAD Pro. The design involves load calculations and analyzing the whole structure by STAAD Pro. The design methods used in STAAD Pro analysis are Limit State Design conforming to Indian Standard Code of Practice. These involve Staad Modeling, Analysis the members due to the effect of Wind & Seismic load & Compare them for a 33 meter height Building with Concrete & Steel construction. The proposal structure is a G+10 storied building with 3.00 m as the height of each floor. The overall plan dimension of the building is 21.30 m x 14.0m.
ANALYSIS AND DESIGN OF MULTI STOREY (G+5) COMMERCIAL BUILDING BY STAAD PRO AN...Bala Balaji
This document provides a project report on the analysis and design of a multi-storey commercial building (G+5 levels) using STAAD Pro and ETABS software. The report includes an introduction, literature review on analysis methods, plan of the building, load calculations, design of beams, columns, slabs and footings. STAAD Pro is used for the 3D analysis of the building to obtain results like bending moments and shear forces. The report presents the analysis, design and results obtained from the software for various structural elements of the building.
IRJET- Planning, Analyzing and Design of High Rise Building using EtabsIRJET Journal
1) The document discusses planning, analyzing, and designing a 15-story residential building using ETABS software.
2) It describes modeling the building in ETABS, including dimensions of columns, beams, slabs and applying loads like dead, live, and seismic.
3) The analysis involved evaluating bending moments, shear forces, and drift from equivalent static analysis in ETABS to ensure structural integrity under loads.
This document describes a project to analyze and design a pre-engineered building for an industrial shed. It provides details of the building dimensions, location, and loading conditions. It outlines the methodology, which includes calculating dead loads, live loads, and wind loads. Load calculations are presented for self-weight, roofing, purlins, sheeting, live loads, and wind loads based on the building's location in Pune, India. The document also includes plans and elevations of the building and tables of material properties and load combinations that will be used in the structural analysis and design using STAAD Pro software.
This document describes a project submitted by Bedabrata Bhattacharjee and A.S.V. Nagender to analyze and design a multi-storey building using STAAD.Pro software. It includes a certificate from their professor U.K. Mishra certifying the project. The document then discusses loads considered for the building design including dead loads, imposed loads, wind loads and seismic loads. It provides background on analyzing the structure, designing based on limit state methods, and conforming to Indian code standards. The objective is to analyze a G+21 building using STAAD.Pro to understand its capabilities for high-rise structural design.
This document describes a project submitted by Bedabrata Bhattacharjee and A.S.V. Nagender to analyze and design a multi-storey building using STAAD.Pro software. It includes a certificate from their professor U.K. Mishra certifying the project. The document then discusses loads considered for the building design including dead loads, imposed loads, wind loads and seismic loads. It provides background on analyzing the structure, designing based on limit state methods, and conforming to Indian code standards. The objective is to analyze a G+21 building using STAAD.Pro to understand its capabilities for high-rise structural design.
REPORT ON G+4 RCC HOSTEL BUILDING ANALYSIS AND DESIGN USING STAAD PRO SOFTWARERakeshDas161
REPORT ON G+4 RCC HOSTEL BUILDING IN ( SEISMIC ZONE 5 ) ANALYSIS AND DESIGN USING STAAD PRO SOFTWARE
PREPARED BY RAKESH DAS AND HIS GROUP
DEPARTMENT OF CIVIL ENGINEERING
GIRIJANANDA CHOWDHURY INSTITUTE OF MANAGEMENT AND TECHNOLOGY GUWAHATI ASSAM
IRJET- Design and Structural Analysis of Multi Storey Building (Both Commerci...IRJET Journal
This document discusses the structural analysis and design of a multi-storey commercial and residential building using STAAD Pro software. It first describes analyzing the building by calculating loads like dead load, live load, and load combinations. It then details designing building components like slabs, beams, columns, and footings based on the load calculations. The analysis found the building to be safe against all loadings and deflections. The conclusion is that STAAD Pro provides accurate results and a safe structural design for the multi-storey building.
ANALYSIS AND DESIGN OF BRIDGE FOUNDATIONScott Donald
This document discusses the analysis and design of bridge foundations using structural engineering software. It begins by describing the importance of properly analyzing and designing bridge substructures. It then details the analysis of a bridge in India using Autodesk InfraWorks to model the structure and Staad Pro to analyze forces in the superstructure. Finally, it outlines the design of pile foundations in Staad Pro for the bridge based on relevant codes of practice. The document demonstrates how engineering software can help efficiently analyze and design complex bridge substructures.
“Design and modeling of commercial cum residential building by using Autodesk...IRJET Journal
This document describes the design and modeling of a commercial-cum-residential building using Autodesk Revit and StaadPro software. It involves planning and drafting the building layout in AutoCAD, developing a 3D model in Revit, analyzing the structural components using StaadPro, and comparing the results with manual calculations. The building has a ground floor with commercial shops and a first floor containing residential flats. Planning, designing, modeling and analyzing the building helps gain knowledge of using BIM and analysis software for structural design of multi-use buildings within time and cost constraints.
“Design and modeling of commercial cum residential building by using Autodesk...IRJET Journal
This document describes the design and modeling of a commercial-cum-residential building using Autodesk Revit and StaadPro software. It involves planning and drafting the building layout in AutoCAD, developing a 3D model in Revit, analyzing the structural components using StaadPro, and comparing the results with manual calculations. The building has a ground floor with commercial shops and a first floor containing residential flats. Planning, designing, modeling and analyzing the building helps gain knowledge of using BIM and analysis software for structural design of multi-use buildings within time and cost constraints.
To Analyze and Comparing a G+12 story RCC building using IS-875 (part 3)-2015...IRJET Journal
This document analyzes and compares a 12-story reinforced concrete building using the wind load provisions of IS-875 (part 3)-2015 and ASCE-07 for a basic wind speed of 50m/s using STADD PRO software. The study finds that displacements, member forces, and story drift are generally higher when designed according to IS-875 compared to ASCE-07. Specifically, node displacements in the x and z directions and bending moments in columns are higher using IS-875, while y-direction displacements and axial column forces are higher using ASCE-07. Additionally, the quantity of concrete required is larger when designed according to IS-875. The objective is to understand the differences between international and
Similar to Ravi kant sahu practical training report (20)
Seminar report on Indoor Environment quality Ravi Kant Sahu
Indoor environmental quality (IEQ) refers to the quality of a building’s environment in relation to the health and wellbeing of those who occupy space within it. IEQ is determined by many factors, including lighting, air quality, and damp conditions
Case study on flash floods in the dhauliganga river 1Ravi Kant Sahu
The 2021 Uttarakhand flood began on 7 February 2021 in the environs of the Nanda Devi National Park, a UNESCO World Heritage Site in the outer Garhwal Himalayas in Uttarakhand state, India. It is believed to have been caused by a landslide, an avalanche or a glacial lake outburst flood
Staad.Pro Training Report or Summer Internship Ravi Kant Sahu
This repot is the brief discussion about staad pro and its results .How can we work on staad.pro, what are the step which are used to desin building structure in staad.pra .it is very advance software.
Learning of practical things of civil engineering (report ) Ravi Kant Sahu
It will brief you that summer internship training and varous experience of my journey and site investigation of construction and all the thing which I learnt during this period.
The document discusses hydraulic conductivity, which measures the ability of a material like soil or rock to transmit fluids through pores and fractures under an applied hydraulic gradient. It describes hydraulic conductivity as being important for calculating groundwater movement rates and outlines experimental and empirical methods for determining it in the field or laboratory, such as constant head tests, falling head tests, or correlations with soil properties. Hydraulic conductivity is the constant in Darcy's Law and is defined as the volume of water that will move through a porous medium per unit time under a unit hydraulic gradient through a unit area measured perpendicular to flow.
This report summarizes a site visit by a civil engineering student to an under construction building site at CIPET Jaipur. The student observed various construction materials being used like cement, coarse and fine aggregates, bricks and their testing. Formwork, concrete mixing using a batching plant and compaction with vibrators was seen. The types of concrete used, formwork, block masonry, reinforcement details and construction equipment were also documented. The site visit helped apply theoretical knowledge to practical construction and understand challenges of working on site.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
1. Swami Keshvanand Institute of Technology,Management and
Gramothan,Jaipur
Submitted To:
Dr Lalit Kumar Gupta
Assistant Professor
Submitted By:
Ravi Kant Sahu
17ESKCE300
Summer Internship
Presentation-2021
STAAD.Pro
2. Content
● Introduction
● Designing steps involved to design an RC structure
● Load application
● Use of Is 1893 part 1 and use of 875 part 3 wind load
● Wind load
● Advance RC design for concrete structure
● Structural wizard for multi storey and big structure
● Structural wizard for cylindrical structure
● Designing of foundation
● Detailing of steel given by STAAD.pro
● References
3. STAAD.Pro(Structural Analysis and Design Program)
Confidently design any type of structure and share your synchronized model data among your
design team by using one integrated set of applications. Complete your steel, concrete, timber,
aluminum, and cold-formed steel projects, on time and in budget, regardless of complexity.
Design structures anywhere in the world with confidence using over 90 international codes,
reducing your team’s need to learn multiple software applications. Increase your design
productivity with streamlined workflows to reduce duplication of effort and eliminate errors.
5. Load application
● It can be done
by load
command
which is given
in the tool bars
● We can design
structure
various loads
6. Use of Is 1893 part 1 and use of 875 part 3 wind load
For designing of structure earthquake
resistant and durable we have to use
IS code for the load combination and
several factors for example
performance factor ,zone etc.
Same as fo the wind load and dead
load ,live load and snow load