RAEM2 IoT-AE Monitoring System.pdf
•
0 likes•8 views
RAEM2 is an integrated wireless unmanned industrial condition monitoring system with internal battery, AE sensor, and wireless communication module. It is well-suited for the continuous acoustic emission signals monitoring such as leakage and wear signals, and can automatically trigger alarm notifications to users when the detected object is in abnormal conditions.
Report
Share
Report
Share
Download to read offline
Recommended
UWB PRECISION LOCATION
Data sheet of the solution for indoor location, designed and developed by the Spanish company Thaumat
Sound Wave (Acoustic Emission)Monitoring and Detection of Bridge Broken Wire.pdf
non-destructive testing、structural health monitoring、acoustic emission、failure analysis、predictive maintenance、fracture mechanics、NDT、FRP、pipelines、oil & gas、industrial echanical engineering、bridges、ground testing和vibration monitoring
Expertise areas:
* Non-destructive testing: acoustic emission, ultrasonic and other methods #NDT, #AcousticEmission
* Structural health monitoring #StructuralHealthMonitoring
* Fracture mechanics #FractureMechanics
* Sensors, algorithms and DAQ hardware
Applications:
* Aerospace structures (metal and composite)
* Reinforced concrete structures: bridges, tunnels, buildings
* Metal pressure equipment: piping, reactors, pressure vessels
* Material research: composites, metals, concrete, ceramics
Tag4M datasheet en
The Tag4M datasheet describes a wireless sensor module with the following key features:
- Dimensions of 65mm x 48mm with an onboard antenna and external antenna connector
- An onboard 32-bit processor, WiFi transceiver, A/D converter, temperature sensor, and real-time clock
- Data storage capabilities including 10,000 readings in RAM and 30 in non-volatile memory
- Powered by a CR123A battery with a 3.3V external power option and low power modes.
Wireless ai based intelli industrial security robot 2 ppt
This document describes a wireless industrial security robot project. The robot is designed to detect dangerous events like fires, gas leaks, or high temperatures using sensors. It can provide live video streaming to a remote monitor. The robot uses a microcontroller, motors, sensors and a mechanical arm. It aims to save manpower and improve safety by allowing work in hazardous environments. When issues are detected, it can send alert messages via GSM. The robot is expected to measure environmental data, detect obstacles, and change speed based on sensor readings.
IRJET- Automated Targeting System for Open Space Military Area
This document describes an automated targeting system for open space military areas using an ultrasonic sensor mounted on a servo motor. The system uses an Arduino microcontroller connected to the ultrasonic sensor and servo motor. When the ultrasonic sensor detects an object within its range, it will trigger the buzzer and display the detection on an LCD screen. The system aims to allow military surveillance of open areas using low-cost components like ultrasonic sensors and servos controlled by an Arduino.
Ness Ppt
- Crossbow Technology develops wireless sensor networks using an open Bluetooth standard and programmable "Smart I/O" devices to interface with various sensors and actuators.
- Bluetooth allows wireless communication between sensors/nodes and computers/PDAs within a 10-100 meter range using low power and frequency hopping spread spectrum technology.
- Crossbow's wireless sensor nodes incorporate an ARM processor, Bluetooth radio, analog inputs, and Smart I/O interfaces to allow plug-and-play connection of various sensor types to the wireless network.
FineTek (Taiwan) Battery Powered Electromagnetic Flowmeter
This battery-powered electromagnetic flowmeter integrates multiple input and output signals. It is designed for wireless transmission of flow, pressure, and other sensor data over long periods from up to 5 years on batteries. Key features include IP68 protection, accurate bidirectional flow measurement, remote configuration capability, and data logging.
Gprs link 2-way-logging-transmitter
Sutron’s Multi-Sensor Input Logger plus Flexible, Economical
2-Way GPRS now has WiFi capability for complete station setup & data access.
Recommended
UWB PRECISION LOCATION
Data sheet of the solution for indoor location, designed and developed by the Spanish company Thaumat
Sound Wave (Acoustic Emission)Monitoring and Detection of Bridge Broken Wire.pdf
non-destructive testing、structural health monitoring、acoustic emission、failure analysis、predictive maintenance、fracture mechanics、NDT、FRP、pipelines、oil & gas、industrial echanical engineering、bridges、ground testing和vibration monitoring
Expertise areas:
* Non-destructive testing: acoustic emission, ultrasonic and other methods #NDT, #AcousticEmission
* Structural health monitoring #StructuralHealthMonitoring
* Fracture mechanics #FractureMechanics
* Sensors, algorithms and DAQ hardware
Applications:
* Aerospace structures (metal and composite)
* Reinforced concrete structures: bridges, tunnels, buildings
* Metal pressure equipment: piping, reactors, pressure vessels
* Material research: composites, metals, concrete, ceramics
Tag4M datasheet en
The Tag4M datasheet describes a wireless sensor module with the following key features:
- Dimensions of 65mm x 48mm with an onboard antenna and external antenna connector
- An onboard 32-bit processor, WiFi transceiver, A/D converter, temperature sensor, and real-time clock
- Data storage capabilities including 10,000 readings in RAM and 30 in non-volatile memory
- Powered by a CR123A battery with a 3.3V external power option and low power modes.
Wireless ai based intelli industrial security robot 2 ppt
This document describes a wireless industrial security robot project. The robot is designed to detect dangerous events like fires, gas leaks, or high temperatures using sensors. It can provide live video streaming to a remote monitor. The robot uses a microcontroller, motors, sensors and a mechanical arm. It aims to save manpower and improve safety by allowing work in hazardous environments. When issues are detected, it can send alert messages via GSM. The robot is expected to measure environmental data, detect obstacles, and change speed based on sensor readings.
IRJET- Automated Targeting System for Open Space Military Area
This document describes an automated targeting system for open space military areas using an ultrasonic sensor mounted on a servo motor. The system uses an Arduino microcontroller connected to the ultrasonic sensor and servo motor. When the ultrasonic sensor detects an object within its range, it will trigger the buzzer and display the detection on an LCD screen. The system aims to allow military surveillance of open areas using low-cost components like ultrasonic sensors and servos controlled by an Arduino.
Ness Ppt
- Crossbow Technology develops wireless sensor networks using an open Bluetooth standard and programmable "Smart I/O" devices to interface with various sensors and actuators.
- Bluetooth allows wireless communication between sensors/nodes and computers/PDAs within a 10-100 meter range using low power and frequency hopping spread spectrum technology.
- Crossbow's wireless sensor nodes incorporate an ARM processor, Bluetooth radio, analog inputs, and Smart I/O interfaces to allow plug-and-play connection of various sensor types to the wireless network.
FineTek (Taiwan) Battery Powered Electromagnetic Flowmeter
This battery-powered electromagnetic flowmeter integrates multiple input and output signals. It is designed for wireless transmission of flow, pressure, and other sensor data over long periods from up to 5 years on batteries. Key features include IP68 protection, accurate bidirectional flow measurement, remote configuration capability, and data logging.
Gprs link 2-way-logging-transmitter
Sutron’s Multi-Sensor Input Logger plus Flexible, Economical
2-Way GPRS now has WiFi capability for complete station setup & data access.
Cy-Net3 Network Module
The document introduces the Cy-Net3 mesh networking technology and its USB/Ethernet Gateway module. Cy-Net3 uses ad hoc mesh networking to allow self-forming and self-healing low power networks. The Gateway module allows Cy-Net3 networks to connect to Ethernet and USB devices and supports various applications including automated meter reading, home automation, and industrial telemetry.
Monitoring photovoltaique GANTNER INSTRUMENTS FRANCE
The document discusses intelligent solutions for environmental monitoring of photovoltaic systems. It describes string level monitoring devices that can detect errors in individual solar module lines and a data logger that acquires measurement data from string monitors and transmits it to higher level systems. A web portal then allows global access to the system data. The solutions allow fast detection of issues to improve energy production and system lifetime.
Industrial 4g router specification and application
4G router is a high-speed router for the industrial Internet of things. it can easily establish a high-speed and stable wireless transmission network and provide users with wireless long-distance data transmission function by using public LTE network.
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
LoRa application for detecting the harmful gases
Pick any technological problem statement, The Problem statement must solve using the technology the Internet of Things, Design the Solution for the problem and explain here the Protocols, Circuit Diagram and Algorithm for the same.
Ans.
• Technological problem statement:
Detection of harmful gases in air with cheap long range feasible solution and efficient controlling measures
Dfun pbat gate battery monitoring system 2021 v2.1
The document describes a battery monitoring system that includes an intelligent gateway, battery string sensors, battery cell sensors, and optional accessories. The system provides real-time monitoring of battery parameters, data logging, alarms, and analysis tools. It can monitor up to 480 batteries in one system and supports communication protocols like MODBUS and SNMP.
Wireless Mesh Networking - A development path
A brief introduction in applying wireless mesh networking to the geotechnical industry. Presented at the Field Measurements in Geomechanics symposium, Boston, MA in 2007.
[Apologies for the malformed animations]
Integrated Mine Safety Monitoring and Alerting System Using Zigbee & Can Bus
1. The document describes an integrated mine safety monitoring and alerting system that uses Zigbee and CAN bus technology.
2. The system aims to improve mine safety monitoring by integrating personnel positioning, gas detection, and other functions into a single wireless network.
3. Sensors attached to miners' helmets would detect environmental parameters like temperature, gas levels, and transmit data via Zigbee to a base station for monitoring and alerting purposes if thresholds are exceeded. CAN bus is used to improve communication speed between nodes.
Power line communication
Power line communication uses existing power lines to transmit data and provides a way to share internet access and create home networks without additional wiring. It allows devices to be plugged directly into power outlets for high-speed connectivity anywhere in the home. While wireless is good for mobile devices, powerline communication provides more reliable streaming, whole-home coverage, faster speeds, and greater security through encryption. It can be used to set up smart home systems, security monitoring, and internet phone service without running new cables.
Power line communication
Power line communication uses existing power lines to transmit data and provides several advantages over traditional wired or wireless networks. It allows for high-speed internet access and whole-home networking without additional wiring. Data is transmitted through power lines using modulated signals and can be received anywhere in the home or office by plugging devices into standard power outlets. While power line communication provides benefits over other network types, there are some limitations related to electromagnetic interference, security, and standardization.
Hardened Ethernet In ITS 2010
This document summarizes a presentation given by Steve Frank of EtherWAN, a manufacturer of Ethernet networking devices. EtherWAN focuses on producing environmentally hardened Ethernet switches and media converters for applications in transportation infrastructure, security/surveillance, and smart grid utilities. Their devices are designed to operate in extreme temperatures and withstand vibration. EtherWAN provides managed and unmanaged switches with features like VLAN tagging, QoS, port security, and fast recovery from link failures. Their hardened devices are suited for network edge applications requiring reliability.
Bits pilani solar power fencing by blaze automation
The document outlines security and surveillance requirements and proposals for BITS Pilani - Hyderabad Campus. It discusses various perimeter security fencing options including basic, mid-range, and advanced systems with integrated CCTV. Budget requirements are provided for each level, ranging from Rs. 33-36 lakhs for basic fencing to Rs. 134-140 lakhs for an advanced system. Key components and features of each are described, including centralized monitoring, zone identification, health monitoring, and intrusion detection capabilities. IP CCTV integration and network video recorder options are also summarized.
Water and Electrical Utility Meter Reading with BPL
This document discusses an automatic meter reading system for water authorities that uses fluidic oscillation technology in water meters to measure water flow accurately without moving parts. The system includes wireless communication modules in the meters that transmit meter readings to concentrator units, which then send the data through various network backbones to utility companies. The technology provides benefits like reduced operating costs and more accurate billing for water authorities and subscribers.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
This document describes a tactical cellular jamming system that can jam up to 6 cellular bands simultaneously. It scans for cellular signals, displays the channel levels, and then instructs the jammer to block the nearest channels. The system supports uplink and downlink jamming individually or together. It has a high sensitivity receiver and high output power jammer modules that can be remotely controlled through an interface. The system is designed for special security and military applications to ensure communication security over long distances.
4. CAM-105W datasheet
This document provides information on the CAM-105w Cellular Activity Monitor made by JJN Electronics Ltd. It can detect cellular signals from 2G, 3G, 4G, WiFi and Bluetooth devices up to 50 meters away. It logs detected signals with details like time, date, band and strength. The log of up to 4000 events can be viewed, downloaded and analyzed to identify source devices and activity patterns over time. The monitor is designed to detect unauthorized mobile device usage and hidden transmitters.
Cn data sheet_cn_pilot_e500_e501s_e502s_family
The document describes Cambium Networks' cnPilot e500, e501S, and e502S outdoor Wi-Fi access point models. These are medium- to high-density APs with internal antennas and mounting brackets for simplified installation. The e501S and e502S have integrated high-gain sector antennas and a front-to-back signal delta of 23 dBm for excellent isolation in high-interference environments. All APs are cloud-managed by the cnMaestro system and support features such as controller-less roaming, dynamic channel selection, and mesh networking.
CDMALink Logging Transmitter
Sutron’s Multi-Sensor Input Logger plus Extremely Flexible
& Economical 2-Way CDMA now has WiFi capability for
complete station set-up & data access.
TAINET ENTU 763GO SFP to SFP Media Converter
TIANET's ENTU 763GO SFP to SFP media converter has two SFP sockets. It can convert two optical digital signals of SFP modules, which maybe different wavelength, different distance or different mode (single mode/multi mode fiber) and same speed at 100M Hz or 1G Hz auto detection. It allows the operator to maintain the ENTU 763GO with IEEE 802.3ah Link Layer OAM and TS-1000 OAM at CO or CPE mode.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
More Related Content
Similar to RAEM2 IoT-AE Monitoring System.pdf
Cy-Net3 Network Module
The document introduces the Cy-Net3 mesh networking technology and its USB/Ethernet Gateway module. Cy-Net3 uses ad hoc mesh networking to allow self-forming and self-healing low power networks. The Gateway module allows Cy-Net3 networks to connect to Ethernet and USB devices and supports various applications including automated meter reading, home automation, and industrial telemetry.
Monitoring photovoltaique GANTNER INSTRUMENTS FRANCE
The document discusses intelligent solutions for environmental monitoring of photovoltaic systems. It describes string level monitoring devices that can detect errors in individual solar module lines and a data logger that acquires measurement data from string monitors and transmits it to higher level systems. A web portal then allows global access to the system data. The solutions allow fast detection of issues to improve energy production and system lifetime.
Industrial 4g router specification and application
4G router is a high-speed router for the industrial Internet of things. it can easily establish a high-speed and stable wireless transmission network and provide users with wireless long-distance data transmission function by using public LTE network.
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
LoRa application for detecting the harmful gases
Pick any technological problem statement, The Problem statement must solve using the technology the Internet of Things, Design the Solution for the problem and explain here the Protocols, Circuit Diagram and Algorithm for the same.
Ans.
• Technological problem statement:
Detection of harmful gases in air with cheap long range feasible solution and efficient controlling measures
Dfun pbat gate battery monitoring system 2021 v2.1
The document describes a battery monitoring system that includes an intelligent gateway, battery string sensors, battery cell sensors, and optional accessories. The system provides real-time monitoring of battery parameters, data logging, alarms, and analysis tools. It can monitor up to 480 batteries in one system and supports communication protocols like MODBUS and SNMP.
Wireless Mesh Networking - A development path
A brief introduction in applying wireless mesh networking to the geotechnical industry. Presented at the Field Measurements in Geomechanics symposium, Boston, MA in 2007.
[Apologies for the malformed animations]
Integrated Mine Safety Monitoring and Alerting System Using Zigbee & Can Bus
1. The document describes an integrated mine safety monitoring and alerting system that uses Zigbee and CAN bus technology.
2. The system aims to improve mine safety monitoring by integrating personnel positioning, gas detection, and other functions into a single wireless network.
3. Sensors attached to miners' helmets would detect environmental parameters like temperature, gas levels, and transmit data via Zigbee to a base station for monitoring and alerting purposes if thresholds are exceeded. CAN bus is used to improve communication speed between nodes.
Power line communication
Power line communication uses existing power lines to transmit data and provides a way to share internet access and create home networks without additional wiring. It allows devices to be plugged directly into power outlets for high-speed connectivity anywhere in the home. While wireless is good for mobile devices, powerline communication provides more reliable streaming, whole-home coverage, faster speeds, and greater security through encryption. It can be used to set up smart home systems, security monitoring, and internet phone service without running new cables.
Power line communication
Power line communication uses existing power lines to transmit data and provides several advantages over traditional wired or wireless networks. It allows for high-speed internet access and whole-home networking without additional wiring. Data is transmitted through power lines using modulated signals and can be received anywhere in the home or office by plugging devices into standard power outlets. While power line communication provides benefits over other network types, there are some limitations related to electromagnetic interference, security, and standardization.
Hardened Ethernet In ITS 2010
This document summarizes a presentation given by Steve Frank of EtherWAN, a manufacturer of Ethernet networking devices. EtherWAN focuses on producing environmentally hardened Ethernet switches and media converters for applications in transportation infrastructure, security/surveillance, and smart grid utilities. Their devices are designed to operate in extreme temperatures and withstand vibration. EtherWAN provides managed and unmanaged switches with features like VLAN tagging, QoS, port security, and fast recovery from link failures. Their hardened devices are suited for network edge applications requiring reliability.
Bits pilani solar power fencing by blaze automation
The document outlines security and surveillance requirements and proposals for BITS Pilani - Hyderabad Campus. It discusses various perimeter security fencing options including basic, mid-range, and advanced systems with integrated CCTV. Budget requirements are provided for each level, ranging from Rs. 33-36 lakhs for basic fencing to Rs. 134-140 lakhs for an advanced system. Key components and features of each are described, including centralized monitoring, zone identification, health monitoring, and intrusion detection capabilities. IP CCTV integration and network video recorder options are also summarized.
Water and Electrical Utility Meter Reading with BPL
This document discusses an automatic meter reading system for water authorities that uses fluidic oscillation technology in water meters to measure water flow accurately without moving parts. The system includes wireless communication modules in the meters that transmit meter readings to concentrator units, which then send the data through various network backbones to utility companies. The technology provides benefits like reduced operating costs and more accurate billing for water authorities and subscribers.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
This document describes a tactical cellular jamming system that can jam up to 6 cellular bands simultaneously. It scans for cellular signals, displays the channel levels, and then instructs the jammer to block the nearest channels. The system supports uplink and downlink jamming individually or together. It has a high sensitivity receiver and high output power jammer modules that can be remotely controlled through an interface. The system is designed for special security and military applications to ensure communication security over long distances.
4. CAM-105W datasheet
This document provides information on the CAM-105w Cellular Activity Monitor made by JJN Electronics Ltd. It can detect cellular signals from 2G, 3G, 4G, WiFi and Bluetooth devices up to 50 meters away. It logs detected signals with details like time, date, band and strength. The log of up to 4000 events can be viewed, downloaded and analyzed to identify source devices and activity patterns over time. The monitor is designed to detect unauthorized mobile device usage and hidden transmitters.
Cn data sheet_cn_pilot_e500_e501s_e502s_family
The document describes Cambium Networks' cnPilot e500, e501S, and e502S outdoor Wi-Fi access point models. These are medium- to high-density APs with internal antennas and mounting brackets for simplified installation. The e501S and e502S have integrated high-gain sector antennas and a front-to-back signal delta of 23 dBm for excellent isolation in high-interference environments. All APs are cloud-managed by the cnMaestro system and support features such as controller-less roaming, dynamic channel selection, and mesh networking.
CDMALink Logging Transmitter
Sutron’s Multi-Sensor Input Logger plus Extremely Flexible
& Economical 2-Way CDMA now has WiFi capability for
complete station set-up & data access.
TAINET ENTU 763GO SFP to SFP Media Converter
TIANET's ENTU 763GO SFP to SFP media converter has two SFP sockets. It can convert two optical digital signals of SFP modules, which maybe different wavelength, different distance or different mode (single mode/multi mode fiber) and same speed at 100M Hz or 1G Hz auto detection. It allows the operator to maintain the ENTU 763GO with IEEE 802.3ah Link Layer OAM and TS-1000 OAM at CO or CPE mode.
Similar to RAEM2 IoT-AE Monitoring System.pdf (20)
Monitoring photovoltaique GANTNER INSTRUMENTS FRANCE
Monitoring photovoltaique GANTNER INSTRUMENTS FRANCE
Industrial 4g router specification and application
Industrial 4g router specification and application
Dfun pbat gate battery monitoring system 2021 v2.1
Dfun pbat gate battery monitoring system 2021 v2.1
Integrated Mine Safety Monitoring and Alerting System Using Zigbee & Can Bus
Integrated Mine Safety Monitoring and Alerting System Using Zigbee & Can Bus
Bits pilani solar power fencing by blaze automation
Bits pilani solar power fencing by blaze automation
Water and Electrical Utility Meter Reading with BPL
Water and Electrical Utility Meter Reading with BPL
Recently uploaded
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Hematology Analyzer Machine - Complete Blood Count
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Recently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Hematology Analyzer Machine - Complete Blood Count
Hematology Analyzer Machine - Complete Blood Count
RAEM2 IoT-AE Monitoring System.pdf
- 1. RAEM2 IoT-AE Monitoring System Single channel, time triggering Communications: 4G, WiFi, NB-IoT, LoRa, Zigbee or Bluetooth Data transmission to local devices (PC, phones, or PLC) and cloud servers Suitable for timing monitoring for continuous signals, eg. leakage or wear signals. Technical specs: QingCheng AE Institute(Guangzhou) Co.,Ltd All rights reserved. Email: sales2@ae-ndt.com Website: www.aendt.com Contact: +86 19128609186 Address: 601-9,Building 3,232 KeZhu Road, HuangPu District, GuangZhou, China RAEM2 is an integrated wireless unmanned industrial condition monitoring system with internal battery, AE sensor, and wireless communication module. It is well-suited for the continuous acoustic emission signals monitoring such as leakage and wear signals, and can automatically trigger alarm notifications to users when the detected object is in abnormal conditions. Channel Single channel Sampling rate 2M/s Trigger method Time trigger Sampling resolu�on 16-bit System noise <30dB Dynamic range 60dB Protect grade IP67 Input bandwidth 30KHz-175KHz Sampling length 15000 points max Opera�ng voltage 7.4V Sampling current 200mA Sleeping current 200uA Analog filter 30kHz-175kHz Working temperature -40°C~60°C Digital filter Sampling rate: 500kHz. 125-175KHz, 10-80KHz, 30-80KHz Sampling rate: 1000kHz. 125-175KHz, 80-200KHz, 80-400KHz Sampling rate: 2000kHz. 125-175KHz, 80-200KHz, 80-400KHz Sensor Internal sensor with built-in preamplifier (customizable) Data output Waveform, AE parameters and parameter ra�ng AE parameter Amplitude, energy, RMS, ASL Comm method 4G、Bluetooth (customized with Wi-Fi, LoRa、CAN、RS485、NB-OT, Zigbee etc.) Power supply Rechargeable lithium-ion ba�ery (3000mAh) Installa�on Magne�c base, can be adsorbed on the metal surface of the object Accessories Internet antenna, Bluetooth antenna, power adapter
- 2. Real-time display of waveform and AE parameter. Quantitative testing results Auto alarm notification via SMS or email, bluetooth onsite inspection Remote configure hardware. Brief introduction of IoT cloud platform: Advantages: 1. Stand-alone monitoring system, no intrusive to your equipment. 2. Unattended monitoring, auto alarms to PC by email or SMS. 3. Wireless data communication, various communication methods available, 4G, WiFi, NB-IoT, LoRa, Zigbee, etc. 4. Based on Linux Operating System, long-term stable running. 5. Suitable for most structural health / conditional monitoring. 6. Quantitative monitoring results, leakage rate, bridge cable break rate, etc. 7. The cloud server for uploading data can be customized. 8. Bluetooth onsite inspection. QingCheng AE Institute(Guangzhou) Co.,Ltd All rights reserved. Email: sales2@ae-ndt.com Website: www.aendt.com Contact: +86 19128609186 Address: 601-9,Building 3,232 KeZhu Road, HuangPu District, GuangZhou, China