The document summarizes RADWIN's 2000 3.5 GHz portfolio of carrier grade point-to-point solutions for frequencies between 3.4-3.7 GHz. The portfolio includes the C-Series and X-Series which provide up to 100 Mbps and 20 Mbps of throughput respectively, along with TDM support. The solutions can support applications such as broadband access, backhaul for cellular networks and more. Key features include long range of up to 120 km, OFDM technology, advanced MIMO and diversity, and flexibility to support IP and TDM networks.
High Speed Long Range Wireless SCADA Radio Modem TMR1 - IP67 EnclosureBarry Zoon
High Speed Long Range Wireless SCADA Radio Modem TMR1 - IP67 Enclosure
LICENSE-FREE, CERTIFIED AROUND THE WORLD
The Trimble TMR1 Enclosed IP67 is a dual ISM band (865-870 and 902-928 MHz) networked transceiver supporting license-free wireless communications around the world. With available throughput up 2.6Mbps, the TMR1 allows you to seamlessly integrate both serial and Ethernet traffic as well as having the throughput available for video. Range as high as 70 miles has been demonstrated in low noise environments. The TMR1 rugged IP67 housing high performance and versatility make it ideal for oil/gas, water and electric utilities, environmental monitoring and agricultural applications.
ADAPTIVE SPEED/MODULATION TECHNOLOGY
The Trimble TMR1 supports both point-to-point and point-to-multipoint network topologies. With most networked radios operating in point-to-multipoint mode, the speed of the access point radio is restricted to the speed and modulation of the weakest link.
DUAL DATA PORTS FOR BOTH SERIAL AND IP COMMUNICATION
The Trimble TMR1 is equipped with two data connectors: one for serial/power and one for Ethernet. This allows you to attach sensors to the TMR1 in the field and to communicate with any TMR1 via Ethernet cables, a LAN/WAN or the Internet. All links can be protected by AES 128- and 256-bit data encryption and VLAN segregation, so only you are allowed to communicate with your network.
RUGGED, WATERPROOF, MADE FOR THE REAL WORLD
The Trimble TMR1 is built to survive in real-world industrial applications, from mines and
construction sites to warehouses and oil rigs. The rugged aluminum housing and connectors are certified to withstand submersion in 1 meter of water and are chemically treated to withstand corrosion.
RADWIN 5000 HPMP levererar trådlös kommunikation på 200 Mbit/s per sektor och är avsedd för situationer som kräver höga prestanda och som kan leverera garanterad bandbredd till användare. Radiolänken har full duplex kommunikation och ethernetanslutning.
High Speed Long Range Wireless SCADA Radio Modem TMR1 - IP67 EnclosureBarry Zoon
High Speed Long Range Wireless SCADA Radio Modem TMR1 - IP67 Enclosure
LICENSE-FREE, CERTIFIED AROUND THE WORLD
The Trimble TMR1 Enclosed IP67 is a dual ISM band (865-870 and 902-928 MHz) networked transceiver supporting license-free wireless communications around the world. With available throughput up 2.6Mbps, the TMR1 allows you to seamlessly integrate both serial and Ethernet traffic as well as having the throughput available for video. Range as high as 70 miles has been demonstrated in low noise environments. The TMR1 rugged IP67 housing high performance and versatility make it ideal for oil/gas, water and electric utilities, environmental monitoring and agricultural applications.
ADAPTIVE SPEED/MODULATION TECHNOLOGY
The Trimble TMR1 supports both point-to-point and point-to-multipoint network topologies. With most networked radios operating in point-to-multipoint mode, the speed of the access point radio is restricted to the speed and modulation of the weakest link.
DUAL DATA PORTS FOR BOTH SERIAL AND IP COMMUNICATION
The Trimble TMR1 is equipped with two data connectors: one for serial/power and one for Ethernet. This allows you to attach sensors to the TMR1 in the field and to communicate with any TMR1 via Ethernet cables, a LAN/WAN or the Internet. All links can be protected by AES 128- and 256-bit data encryption and VLAN segregation, so only you are allowed to communicate with your network.
RUGGED, WATERPROOF, MADE FOR THE REAL WORLD
The Trimble TMR1 is built to survive in real-world industrial applications, from mines and
construction sites to warehouses and oil rigs. The rugged aluminum housing and connectors are certified to withstand submersion in 1 meter of water and are chemically treated to withstand corrosion.
RADWIN 5000 HPMP levererar trådlös kommunikation på 200 Mbit/s per sektor och är avsedd för situationer som kräver höga prestanda och som kan leverera garanterad bandbredd till användare. Radiolänken har full duplex kommunikation och ethernetanslutning.
JTOPTICS® 100Gb/s transceiver module, meticulously crafted for optical communication applications in compliance with the 100G 4WDM 10 MSA. This module adeptly converts four input channels of 25Gb/s electrical data into four channels of CWDM optical signals, subsequently multiplexing them into a single channel for 100Gb/s optical transmission. On the receiver side, the module reversely demultiplexes a 100Gb/s optical input into four channels of CWDM optical signals, converting them into four output channels of electrical data. Equipped with high-performance cooled CWDM DFB transmitters and highly sensitive PIN receivers, this module delivers superior performance for 100 Gigabit Ethernet applications, reaching up to 10km.
Key Features:
1. Hot-pluggable QSFP28 form factor for convenient installation.
2. Maximum link length of 10km over single-mode fiber.
3. Incorporates 4 x 26Gb/s DFB-based CWDM cooling transmitters.
4. Features 4 channels PIN ROSA (Receiver Optical Sub-Assembly).
5. Internal Clock and Data Recovery (CDR) circuits for both receiver and transmitter channels.
6. Supports CDR bypass for enhanced flexibility.
7. Transmission data rate of up to 26Gbps per channel.
8. Utilizes a duplex LC connector for streamlined connectivity.
9. Compliant with IEEE 802.3ba 100GBASE LR4, IEEE 802.3bm, SFF 8665, and SFF 8636 standards.
10. Maximum power dissipation of 4W.
11. Operates on a single 3.3V power supply for simplified power management.
12. RoHS 6 compliant, adhering to environmental standards by being lead-free.
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second). It was first defined by the IEEE 802.3ae-2002 standard.
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second). It was first defined by the IEEE 802.3ae-2002 standard.
The RUGGEDCOM RS940G is a utility-grade, fully managed Ethernet switch, providing six or eight ports of Gigabit Ethernet. Six 10/100/1000BaseTX triple speed copper ports are standard. An additional two Gigabit fiber or copper ports can be added. The RS940G provides a cost effective way of connecting a cluster of field devices to a Gigabit Ethernet backbone
Sagittar LD (Long Distance) Series IP Radio BrochureSagittar
Sagittar LD (Long Distance) Series IP Radio are quick installation links that are designed to achieve the following data throughput speeds:
Sagittar LD Series 20Mbps@40km
Sagittar LD Series 8Mbps@100km
1. Product Portfolio
RADWIN 2000 3.5 GHz Portfolio
Carrier Grade Point-to-Point Solutions in 3.4 - 3.7 GHzProduct Highlights
Up to 100 Mbps net•
aggregate throughput
OFDM technology for•
nLOS performance
Advanced MIMO and•
Diversity technology
IP + Native TDM (up to•
16 E1s/T1s)
Long range - up to 120•
Km/75 miles
Enhanced QoS &•
networking features
Asymmetric capacity-•
fixed or adaptive
channel allocation
Multiple Point-to-Point•
configuration
Extremely fast and easy•
to install
5,10, 20 MHz channel•
bandwidth
RADWIN 2000 3.5 GHz solutions deliver
high-end performance in the 3.4-3.7 GHz
spectrum bands. The point-to-point solutions
provide up to 100 Mbps net aggregate
throughput and a flexible combination of
native TDM (up to 16 E1s/T1s) and Ethernet,
enabling operators to cost-effectively support
converged IP + TDM networks. The solutions
operate in symmetric and in adaptive
asymmetric modes, enabling operators to
optimize link capacity and range.
RADWIN 2000 C-Series
3.5 GHz Solutions
High Capacity PtP for Backhaul
RADWIN 2000 C-Series 3.5 GHz solutions
deliver 100 Mbps net aggregate throughput
and up tp 16 E1s/T1s.
RADWIN 2000 X-Series
3.5 GHz Solutions
Optimized for Broadband Access
RADWIN 2000 X-Series 3.5 GHz solutions
provide up to 20 Mbps net aggregate
capacity and up to 4 T1s or 3 E1s, and are
optimized for broadband access applications.
Target Markets & Applications
RADWIN’s solutions enable 3.5 GHz
frequency owners to utilize their spectrum
and deliver high capacity while reducing
costs and increasing revenue generation.
Fixed Operators & WISPs
Fixed operators and WISPs can use
RADWIN 2000 3.5 GHz solutions to provide
broadband access to corporate clients and
meet guaranteed Service Level Agreements
(SLAs). Operators can backhaul Wi-Fi hot
zones and last mile networks as well as
provide broadband to underserved and
remote areas.
Cellular Carriers
Carriers can utilize RADWIN 2000 3.5 GHz
solutions to backhaul IP and TDM traffic from
base stations, thus eliminating reccurring
microwave license fees, reducing the cost of
backhaul infrastructure and achieving overall
lower total cost of ownership.