About quality indicators

1. PRESENTED BY:
SAMIKSHA B.SAWANT
M,PHARM (IP), 1ST SEM
GUIDED BY:
DR. INDIRA PARAB

2. “QUALITY IS NOT AN
ACCIDENT; BUT IT IS THE
RESULT OF INTELLIGENT
EFFORTS”

3. WHAT IS QUALITY?
 “Quality is fitness for use. ”
 “The totality of features and characteristics of a
product or service that bear on its ability to satisfy a
given need.”
 “Quality involves meeting customers need,
preferences and exceeding it.”
 “Quality also encompasses people, process and
environment.”

4. WHY QUALITY CONTROL?
 Manufacturing process is a repetitive process
depending on both controllable and non-
controllable factors.
 This produces deviation in the quality of the
product.
 QC is the process of verification , or correction of
the quality of the product when deviations are
found to be more than expected.

5. WHAT IS QUALITY CONTROL?
“Those planned and systematic actions which
provides a mean to control and measure the
characteristics of a product, process or a service to
established requirements.”

6. QUALITY CONTROL AS PER ISO:
 “The operational techniques and activities that are
used to satisfy quality requirements.”
 The quality control system verifies and maintains
desired level of quality in an existing product or
service by careful planning, use of proper
equipments and continued inspection and
corrective action as required.

7. WHAT IS QC INSPECTION
 The ISO standard defines inspection as “activity of
measuring, examining, testing one or more
characteristics of a product or service and
comparing the results with specified requirements
in order to establish whether conformity is
achieved for each characteristic.”

8. QUALITY
INSPECTION
LOOP
IDENTIFICATION
OF DEFECTS
FEEDBACK OF
THIS DEFECT
TO
APPROPRIATE
PERSON
DETERMINATION
OF CAUSE OF
DEFECT
CORRECTION
OF DEFECT
QC AND INSPECTION

9. QC THROUGHOUT PRODUCTION
SYSTEM
RAW
MATERIAL,PARTS
AND SUPPLIES
PROCUCTION
PROCESSESS
PRODUCT AND
SERVICES
CONTROL
CHARTS AND
ACCEPTANCE
PLANS
CONTROL
CHARTS
CONTROL
CHARTS AND
ACCEPTANCE
PLANS
INPUTS CONVERSION OUTPUTS
QUALITY OF
INPUTS
QUALITY OF
PARTIALLY
PROCESSED
PRODUCTS
QUALITY OF
OUTPUTS

10.  The safety and efficacy of the finished dosage form
is largely dependent on the purity and quality of the
bulk active drug substance.
 Physical tests such as particle size for raw materials
flow properties etc. are essential tests to assure
consistent operation of the production and control
system and to assure quality and efficacy
PRE-PRODUCTION QC
INSPECTION

11. PRE-PRODUCTION QC INSPECTION
 To decrease quality risk, the inputs can be inspected
prior to production.
 Samples are randomly taken and checked.
 An experienced inspector examines the
sample/prototype to make sure that
 the raw materials meet the specified standards
Whether development team has clearly communicated
the requirements to the manufacturing team.
Whether equipments for mass production is similar to
that for making prototypes.

12. IN PROCESS INSPECTION
 The first products that got out of the line are
inspected for conformity.
 If issues are raised at this stage, the factory can
immediately take actions and avoid delays.
 In-process products are rarely checked as it takes
technician to reliably detect errors on unfinished
products.

13. IN PROCESS QC INSPECTION
 Inspect the test results from in-process tests performed
for conformance with established sampling and testing
protocols, analytical methods, and specifications.
 For example, evaluate the tests for weight variation,
hardness, and friability. All testing must comply with
cGMP.
 The inspection must confirm that the in-process tests
were done, as described in the plan, and ascertain that
the results are within specifications.

14. CLASSIFICATION OF IN-PROCESS INSPECTION
1. Trial run inspection: Tools and machines are checked
before operation.
2. First-off inspection: The items produced in the first
production run are inspected and examined with
respect to specifications.
3. Inspection by self control: Done by operators,
controlling operations at different levels of
production process.
4. Decentralised inspection: Semi finished goods are
inspected either on machines or in the production
line.

15. 5. Centralised inspection:
 There can be single inspection unit for whole plant
 Or each section can have inspection unit to inspect
the items
 The inspection staff is more experienced and
skilled in this case
 Sophisticated and reliable instruments and
techniques are use to measure the quality
 Hence centralised inspection is reliable and
accurate.

16. QC INSPECTION IN PRODUCTION
1) Component dominant: Incoming material must
be checked for required specifications.
2) Set-up dominant: An operation once set at a level,
remains at that level for long. Hence products
produced initially if found free from defects and
conforming to specifications, then the operation
can be cleared for continuous operation.
3) Machine dominant: Operation drift away from
initial set-up level as operation proceeds. Hence
needs periodic inspection for correcting set up.

17. 4. Operator dominant: A certain portion of job is
entirely influenced by operator’s skill.
5.Information dominant: All the information
including the SOP’s, nature of job is given to
concerned person.
6.Record dominant: The written records and
documentation of every process and test
conducted should be maintained.

18. QC INSPECTION IN ANALYTICAL
In general, these inspections include:
 The specific methodology which will be used to test
a new drug product
 A complete assessment of laboratories conformance
with GMP’S
 A specific aspect of laboratory operations

19.  Laboratory records and logs represent a vital
source of information that allows a complete
overview of the technical ability of the staff and of
overall quality control procedures.
 SOPs should be complete and adequate and the
operations of the laboratories should conform to
the written procedures.
 Specifications and analytical procedures should
be suitable and, as applicable, in conformance with
application commitments and compendial
requirements

20.  Documents relating to the formulation of the
product, synthesis of the bulk drug substance,
product specifications, analysis of the product, and
others are examined during the review process in
headquarter
 Inspections are designed to determine if the data
submitted in an application are authentic and
accurate and if the procedures listed in the
application were actually used to produce the data
contained in the application.
 Additionally, they are designed to confirm that
plants (including QC laboratory) are in
compliance with CGMP regulations.

21.  Based on team inspection approach.
 Highly technical and specialised testing
equipments, procedures, data manipulations as
well scientific laboratory operations will be
evaluated.
 The inspection of a laboratory requires the use of
observations of the laboratory in operation and of
the raw laboratory data to evaluate compliance
with CGMP's.
FDA INSPECTION

22. FDA INSPECTION- 4M’s
1. MACHINE:
 Inspection should confirm that preventive
maintenance, cleaning, adjustment etc are
performed
 Machine usage, maintenance, calibration logs,
repair records should be examined
 Verify that the equipments were in good working
order at the time the batches were analysed.

23. 2. METHOD/PROCESS:
Information regarding validation of methods
should be carefully evaluated
All processes that may cause deviation to a device’s
specification and all validated process must be
monitored and controlled
If the process is software controlled, confirm that
the software was validated
Review the software documents, software
validation activities, software change controls and
software validation results to confirm that software
will meet user need

24. 3. MATERIALS:
Raw material testing is of utmost importance as it
directly affects the quality of final product
Hence inspection should examine the analysis of
materials including purity test, quality, charts etc
Inspect if the methods for analysing the purity were
validated
The manufacturer must have complete knowledge of
manufacturing process and the potential impurities
that may appear in materials.
These impurities cannot be evaluated by without a
suitable method and one that has been validated

25. 4. MAN:
Verify that personnel have been qualified to
implement validated processes or
appropriately trained to implement processes which
yield results that can be fully verified
Confirm that the employees have complete knowledge
of the devices, processes
Confirm that employees are aware of the device defects
that may occur as a result of improper performances
Confirm that the employees conducting QC tests are
aware of the defects and errors that may be
encountered while performing their responsibilities

26. FINAL INSPECTION
 It is also known pre-shipment inspection.
 This is the most popular type of QC inspection for
importers.
 It takes place once all the products are finished
and ready for shipment.
 The samples are drawn in a random manner and
thus can be representative of the whole batch.

27. STATISTICAL QUALITY CONTROL
 It is a technique for controlling quality of product using a
set of statistical tools
 It involves two elements:
Statistical process control: This summarizes collection of
data , makes use of control charts.
Acceptance sampling

28. CONTROL CHARTS
 Primary purpose of control charts is to indicate
when production processes might have changed
sufficiently to affect product quality.
 If the indication is that product quality has
deteriorated, corrective is taken.
 Compare attributes (No. of defectives in a
sample)or variables (characteristics that can be
measured on a continuous scale (weight, length,
etc.) of the sample with that of the standard

29. ACCEPTANCE SAMPLING OR SAMPLING INSPECTION
 It is the process of evaluating portion of the product
material in a lot for the purpose of accepting or
rejecting the lot as either conforming or not
conforming to quality specifications.
 The acceptance plan identifies the:
 Size of samples, n
 Type of samples
 Decision criterion, c, used to either accept or
reject the lot
 Samples may be either single, double, or sequential.

30. SINGLE SAMPLING PLAN
Draw random sample (n) from the lot
Determine number of defection in the
sample
If total no. of defects
does not exceed c,
accept the lot
If defection
exceed c, reject
the lot

31. DOUBLE SAMPLING PLAN
Determine no. of defectives in the
sample(n)
Defectives do not exceed
c1, accept the lot
Defectives equal or
exceed r1, reject the lot
Defectives exceed c1 but less than r1, draw
another sample(n2)
Determine no. of defectives in second sample
Total no. of defectives equals
or exceeds c2, reject the lot
Total no. of defectives does not
exceed c2. accept the lot

32. SEQUENTIAL/MULTIPLE SAMPLING
 This is extension of double sampling plan
 At each stage of sampling the cumulated results
are analysed to take decision of accepting/rejecting
the lot
 If no final decision can be taken at anyy stage, then
another sample is drawn to take further decision.

33. QUALITY AUDIT
 ISO defines audit as systematic and independent
examination to determine whether quality
activities and related results comply with planned
arrangements and whether these are implemented
effectively and are suitable to achieve objectives.
 It checks if quality system and procedures are
Free from congenital defects
Are capable of achieving and maintaining
standards of quality chosen by enterprise or
costumers
being adhered to and compiled with, in day to day
work.

34. QUALITY AUDIT AND FOLLOW UP
 Prior to writing auditing report, auditor explains the
observations to auditee
 Corrective actions to be taken are proposed
 Audit report are written in standard format which
contain area audited, dates of audit, persons
contacted, commendable features and
recommendations.
 The report must contain status of implementation of
pending corrective measures as per previous audit.

35. QC INSPECTION IN DISTRIBUTION
AND STORAGE
GMP summarises following principles with respect to
distribution:
Only authorised products are distributed
Premises are suitable for their intended use and kept
on good sanitary condition
All products are received, stored and handled carefully
All operations are performed according to written
procedure, supervised and documented
Adequate provision exist to handle complaints, recalls
and return goods

36.  Storage: Warehouse should be clean, inaccessible
for unauthorised persons, temperature and
humidity control, adequate shelving, free from
insects and vermin.
 Special storage:
Availability of cold room/refrigerator for vaccines
and biological products
Special storage areas for controlled drugs and other
prescription drugs
Suitable and secure storage facility for controlled
drugs and poisons

37. INSPECTION OF ESTABLISHMENT
INSPECTION OF THE DRUG
DISTRIBUTION CHAIN
 Objectives: To ensure-
Protection of patients and members of the public from
malpractice by distributors and supplier of drugs
Adherence to the drug laws and regulations governing
compounding, distribution, importation, export and
storage of drugs.
High ethical and professional standards of
pharmaceutical practice.

38. INSPECTION AND NARCOTIC
SECTION
Functions of Narcotic Drug Unit:
 Controls the use of narcotic and pyschotropic drug
substances
 Issue importation and trade license for narcotic
drugs
 Prepare registry book and template necessary to
control use of narcotic substances and distribute
them among the concerned authority
 Prepare annual statistic on narcotic and
pyschotropic drug substances.

39. Production area of narcotic drugs should be
isolated from other production area
The areas should be such that they preclude the
drugs falling into hands of unauthorized persons
The rooms should be equipped with security
alarms
Room should have metal door and be lockable and
non passsable
The room shall be without windows and separated
from surrounding rooms by partitions
Separate record of all activities related to these
drugs must be maintained.

40. PENICILLIN DRUGS
 Dedicated, self contained premises, facilities and
equipments must be used
 Dust generating operations should maintain relatively
negative pressure
 The exhaust air should be decontaminated as required
 Production area should be ventilated and temperature,
humidity and filtration should be controlled
 Separate storage area should be maintained and the area
must be clearly marked
 Its access is restricted to authorised persons
 QC labs should be designed to suit intended use and avoid
mix-ups
 There should be adequate space for sample handling,
storage of retention and stability samples and storage of
records.

41. HORMONAL PRODUCTS
The premise should be designed to facilitate cleaning
and decontamination
Various rooms should have interlock mechanism or
other system to prevent opening of more than one
door at a time
Supply of safe breathing air should be provided to
prevent the operate from inhaling air from the facility
This can be done by central air supply system or self
contained breathing apparatus
Alarm system for: main air supply failure, temperature
out of specification(oos), humidity oos, CO2 oos, CO
oos and SO2 oos.

42. CONCLUSION
 Quality is a never ending prospect.....
 Increase in quality, increases production,
decreases cost and increases profits
 Thus quality control and inspection form an
integral part of a company’s management.

43. REFERENCES
 Quality management by Bholanath Das, published by
New Century, pg 1, 80-82.
 Total quality management by G.R.Basotia, Published
by Mangal Deep Prakashan, pg 69-73,118-119,125-128
 Managing quality concepts and task by V. Narayana,
and N.S. Sreenivasan, Published by H. S. Poplai for
New Age International Limited, pg 66-69, 73-75
 Fundamentals of quality control and improvement by
Amitava Mitra, second edition, Published by PHI
Learning Private Limited, pg 235-249, 421-479

44. REFERENCES
 TeamBuilding and Total Quality by Gene H. Milas,
published by Narosa publishing house, pg 32, 74,
229
 Total Quality Management by Dr J M Juran,
volume 1, published in India by D.L. Shah Trust.
 Total Quality and Human Resource by Cooper, first
edition, Published by Maya Publishers Pvt.Ltd, pg
235
 Total Quality Management by S. Rajaram and M.
Sivakumar, pg 83-194

45. REFERENCES
 Quality Planning and Analysis by J, M, Juran and
Frank M. Gryna, second edition, Published by Tata
Mc Graw- Hill publishing company limited, pg 356
 http://apps.who.int/prequal/info_general/documen
ts/TRS885/WHO_TRS_885-Annex6.pdf
 http://www.fda.gov/ICECI/Inspections/InspectionG
uides/ucm074918.htm)
 http://qualityinspection.org/qc-inspection/)
 http://www.riigiteataja.ee/../narko_ja_ps
 M.indiamart,com/.../anti-cancer-medicine..

46. THANKYOU