PSC Lift-Mate Manual Lifting Aids
•
0 likes•163 views
A new range of PSC Hands-off safety tools(lift assist manual lifting aids), it prevents back pain problems from bending, and simultaneously improves ergonomics in workplace. It also reduces possible chances of hand and finger injuries associated with lifting carrying the small equipment with bare hands. The manual lifting aids are used with chicksan and bop choke valves, pup joints, fishing tools, pipe, tubing, deck cargo etc.
Report
Share
Report
Share
Download to read offline
Recommended
Health and safety induction
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
Safety leadership
The document discusses leadership concepts that can be applied to safety. It discusses that leadership is not power, status, authority or management alone, but is a process of persuasion or example to induce followership. It also discusses five levels of leadership that a safety leader can progress through, from having subordinates to followers who emulate the leader. Finally, it emphasizes that developing a supportive safety culture through caring, trustworthy leadership is key to improving safety outcomes.
7 Keys for Creating A Safety Culture
Learn what is critical to creating a culture of safety in your organization. These 7 keys based on the science of behavior analysis and positive reinforcement will provide the foundation for a sustainable, effective safety system.
construction fall protection
Falls are the single biggest cause of occupational death and serious injury in the construction industry. Fall protection is required when working 6 feet or more above a lower level. There are two major types of fall protection: passive methods like guardrails and safety nets, and active methods like fall arrest systems that require worker action. A proper fall arrest system includes a full body harness, shock-absorbing lanyard, and anchorage point capable of withstanding 5,000 pounds of force. Regular inspection and proper use of fall protection equipment can help prevent injuries and save lives at construction sites.
Slips Trips And Falls
Slips, trips and falls account for over 20% of all workplace accidents, second only to motor vehicle accidents. They are a major cause of injuries both at and away from work. According to OSHA and CAL-OSHA studies, slips, trips and falls cause 15-22% of accidents and are one of the leading causes of accidental death for those aged 35-64. Common factors that contribute to slips, trips and falls include uneven surfaces, spills, stairs, obstructions, poor lighting, inappropriate footwear, distractions, and inattention.
TOOLBOX TALK | lifting & rigging operations
Lifting and rigging operations are some of the most hazardous activities we regularly undertake, day in day out. The consequences of something going wrong during a lifting or rigging operation can literally be fatal.
Line Of Fire.pptx
Construction workers face a wide variety of hazards that can result in injury or death if proper precautions are not taken. Simple precautions can help avoid injuries from being in the "line of fire" of hazards such as heavy machinery, falling objects, welding sparks, and more. It is everyone's responsibility on a construction site to be aware of potential lines of fire, remain vigilant of changing work environments, and use appropriate protective equipment and safety measures.
WORKING AT HEIGHT pptx
This document provides training on working at height. It defines work at height and outlines hazards such as falls. Fall prevention methods are discussed like full body harnesses, lanyards, anchor points, guardrails, and safety nets. Inspection procedures for harnesses and equipment are covered. Emergency procedures and roles of supervisors, first aiders, and emergency response teams are summarized. The document emphasizes permits, risk assessment, fall protection, inspection and safe work practices for ladders, scaffolds and mobile elevated platforms.
Recommended
Health and safety induction
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
Safety leadership
The document discusses leadership concepts that can be applied to safety. It discusses that leadership is not power, status, authority or management alone, but is a process of persuasion or example to induce followership. It also discusses five levels of leadership that a safety leader can progress through, from having subordinates to followers who emulate the leader. Finally, it emphasizes that developing a supportive safety culture through caring, trustworthy leadership is key to improving safety outcomes.
7 Keys for Creating A Safety Culture
Learn what is critical to creating a culture of safety in your organization. These 7 keys based on the science of behavior analysis and positive reinforcement will provide the foundation for a sustainable, effective safety system.
construction fall protection
Falls are the single biggest cause of occupational death and serious injury in the construction industry. Fall protection is required when working 6 feet or more above a lower level. There are two major types of fall protection: passive methods like guardrails and safety nets, and active methods like fall arrest systems that require worker action. A proper fall arrest system includes a full body harness, shock-absorbing lanyard, and anchorage point capable of withstanding 5,000 pounds of force. Regular inspection and proper use of fall protection equipment can help prevent injuries and save lives at construction sites.
Slips Trips And Falls
Slips, trips and falls account for over 20% of all workplace accidents, second only to motor vehicle accidents. They are a major cause of injuries both at and away from work. According to OSHA and CAL-OSHA studies, slips, trips and falls cause 15-22% of accidents and are one of the leading causes of accidental death for those aged 35-64. Common factors that contribute to slips, trips and falls include uneven surfaces, spills, stairs, obstructions, poor lighting, inappropriate footwear, distractions, and inattention.
TOOLBOX TALK | lifting & rigging operations
Lifting and rigging operations are some of the most hazardous activities we regularly undertake, day in day out. The consequences of something going wrong during a lifting or rigging operation can literally be fatal.
Line Of Fire.pptx
Construction workers face a wide variety of hazards that can result in injury or death if proper precautions are not taken. Simple precautions can help avoid injuries from being in the "line of fire" of hazards such as heavy machinery, falling objects, welding sparks, and more. It is everyone's responsibility on a construction site to be aware of potential lines of fire, remain vigilant of changing work environments, and use appropriate protective equipment and safety measures.
WORKING AT HEIGHT pptx
This document provides training on working at height. It defines work at height and outlines hazards such as falls. Fall prevention methods are discussed like full body harnesses, lanyards, anchor points, guardrails, and safety nets. Inspection procedures for harnesses and equipment are covered. Emergency procedures and roles of supervisors, first aiders, and emergency response teams are summarized. The document emphasizes permits, risk assessment, fall protection, inspection and safe work practices for ladders, scaffolds and mobile elevated platforms.
Leadership Performance in Safety Management Systems.pdf
Vision, collaboration, credibility, communication, action orientation, feedback and recognition, accountability.
All these factors work in parallel when all we talk is safety, safety management systems and exemplary safety culture.
Here's a slideshare to testify the same.
After all, it starts with a personal commitment to workers first, not last!
#management #communication #safety #culture #collaboration
Webbing Sling
Here are the key points that are wrong in this picture:
- The sling is being choked around a sharp edge, which can cut and damage the sling material over time.
- There is no packing/protection on the sharp edge to prevent damage to the sling as it is lifted. Padding/packing should always be used on sharp edges to protect slings.
- Choking a sling increases the stress on it and reduces its working load limit. It's generally not good practice if it can be avoided.
- The choke may not be balanced/even, putting uneven stresses on different parts of the sling. An uneven choke could cause the sling to fail.
So in summary
Tool box talk : why accident occures
The document discusses the causes of workplace accidents. It states that accidents typically occur due to failures in the worker, tools used, materials used, or methods used. Unsafe acts by workers such as operating equipment unsafely, disconnecting safety devices, or taking shortcuts can lead to accidents. Unsafe acts may result from improper attitudes, lack of skills or knowledge, or reduced mental/physical capacities. Unsafe conditions in the workplace like defective equipment, improper guarding, or poor lighting can also cause accidents. To prevent accidents, the document recommends training workers, developing safe procedures, using proper tools, and selecting the right tool for each task.
Safe Rigging Practices
This document provides information on safe rigging practices when using cranes and rigging equipment. It notes that over 70% of crane accidents involve mobile cranes and are often due to negligence of safe rigging practices. Proper inspection and maintenance of equipment as well as ensuring operators are trained are emphasized. Guidelines are provided for inspection of wire rope slings, shackles, and general sling operating practices to prevent accidents and ensure safety.
Lifting & Rigging by NEIS
This document provides information on safe lifting and rigging practices. It discusses major causes of crane accidents like power line contact, overturns, falls from cranes, and mechanical failures. It also describes how to properly inspect hoisting and rigging equipment like slings, wire ropes, hooks, and chains. Specific criteria for when this equipment should be removed from service are provided. The document also outlines safe practices for manual lifting, carrying loads, and operating forklifts.
Promoting A Positive Health And Safety Culture
This document discusses promoting a positive health and safety culture within a fire department. It aims to make crews aware of the importance of a healthy and safe working environment. Key points covered include defining terms like duty of care, hazards, risks and risk assessments. The objectives are to understand what health and safety means, why it should be promoted, how it affects individuals and what it can achieve. Promoting these practices will help firefighters make better decisions, reduce accidents and ensure they can safely help others.
Behavior based safety
Behavior-based safety is a process that helps employees choose safe behaviors over unsafe ones through observation and feedback. It involves observing employees' behaviors, providing feedback on safe and unsafe behaviors, analyzing the data to measure improvements in safety over time, setting improvement goals, and reinforcing safe behaviors and goal attainment. When implemented successfully, it can result in increased efficiency, productivity, morale and profitability.
BBS Overview
This document discusses Behavior Based Safety (BBS), a program aimed at improving safety by focusing on behaviors. It provides an overview of BBS, explaining that BBS involves employees, drives safety improvement, and can lead to positive cultural changes when implemented correctly. However, BBS requires being part of an overall safety process and culture, and is not a replacement for compliance, training, or hazard removal. The document then discusses key aspects of implementing a successful BBS program, such as defining behaviors to observe and improve, understanding what drives both safe and unsafe behaviors, providing positive reinforcement, and focusing on achievements rather than failures.
New Employee Safety Orientation
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
Close protection
i have made this ppt for those who want to work efficiently in fiel of Security for Close protection
MSA Fall Protection
There are 751 deaths a year in the construction industry. Falls account for 35% of those fatalities. This presentation provides insights, safety tips and pointers on how to select the proper harnesses that will help protect your workers from deadly falls.
Working at height slides
The document provides information about working at heights training, including:
- The aims are to provide personnel working at heights with practical knowledge and application of safe practices to prevent injury.
- The objectives include identifying fall regulations and risks, demonstrating safety equipment use, and emergency response procedures.
- It discusses examples of working at heights, regulations and responsibilities to control fall risks, and the goals of reducing falls injuries.
Electrical Safety Joliet Distribution Center
This document provides an overview of electrical safety. It discusses the main electrical hazards of fire, shock, and burns. It defines important electrical terms and outlines safety rules and personal protective equipment requirements for working with electricity, including inspecting cords, locking out equipment during maintenance, and proper grounding. Personal responsibilities are to follow electrical safety rules and report any electrical deficiencies.
2014 CRW - Operating Cranes around Power Lines
Equipment contact with power lines remains one of the top concerns of crane and rigging professionals throughout the world. What is the impact of line voltages and working distances? This presentation identifys work zones, where to mark zones and how to prevent equipment and personnel encroachment in these areas. Mr. Smith also discusses the use of insulated links, non-conductive rigging, required signage and training requirements plus provide key elements of a power line safety system for mobile cranes on a jobsite. If your company is located outside the U.S. and not governed by OSHA rules, this presentation will showcase industry best practices which can be employed no matter where your jobsite is located.
Speaker: Bill Smith, Vice President, NBIS
Electrical hazards & safety training
Regards, Mr. SYED HAIDER ABBAS
MOB. +92-300-2893683 MBA in progress, NEBOSH IGC, IOSH, HSRLI, NBCS,GI,FST,FOHSW,ISO 9001, 14001,
'BS OHSAS 18001, SAI 8000, Qualified .
Portable tools risk assessment
This risk assessment identifies hazards associated with the use of portable power tools, including electricity, flammable atmospheres, moving parts, noise, vibration, ergonomics, slips and falls, dust, air lines, tool jamming, and inappropriate use. Control measures are outlined to reduce the residual risk for each hazard, such as checking tools before use, using guards and protective equipment, restricting use times, and ensuring users are trained. The risk assessment must be reviewed and signed by the assessor, supervisor, and safety coordinators.
Nylon Web Slings Inspection Checklist
Lifting slings made from nylon are the most common and versatile styles of slings. Since they can be used in many lifting applications there are several types of damage that can occur.
Our inspection and check list will not only describe the types of damage but will give tips to prevent damage.
Office safety awareness training
This document provides an overview of office safety training. It identifies potential hazards in an office like injuries, illness, ergonomic issues and accidents. It describes types of hazards like physical, chemical and biological. It provides guidance on safely using office equipment and furniture, handling chemicals, preventing slips/trips/falls and electrical safety. Recommendations include properly arranging computers and workstations, safe storage, good housekeeping and accident/injury reporting procedures. The goal is to create an accident-free work environment and increase safety awareness.
Electrical Safety and Risk Assessments
This document provides an overview of electrical safety and risk assessment. It discusses common electrical hazards like electric shock, burns, fires and explosions. The key causes of electrical accidents are identified as drilling into electrical cables, using defective equipment, and failure to follow lockout/tagout procedures. Electrical safety measures discussed include proper wiring, use of circuit breakers and disconnects, guarding live parts, adequate illumination and headroom, and grounding/bonding principles. Personal protective equipment and safety signage are also addressed.
PSC Hands Free Safety Tools: Caught- Between Injuries
The most important tool that money can’t buy from Project Sales Corps the tool #1- The Correct Mindset. Accepting and letting go the natural reaction to go close and hold the rigging in place until the tension is taken up to make sure the load is properly slung and balanced needs to be changed. Remember the most hazardous part of a lifting operation is lifting off and landing and its important you are as far away from the load as possible.
Hoist technical manual
The document is a user manual for the P-200 portable track hoist. It provides descriptions and instructions for the proper use and maintenance of the hoist. The manual includes sections on product description, technical specifications, intended use, safety precautions, operating instructions, maintenance schedule, troubleshooting, and warranty information. The hoist is designed to lift individuals along a track that is mounted to ceilings or walls, to assist with transfers between locations such as beds and chairs.
More Related Content
What's hot
Leadership Performance in Safety Management Systems.pdf
Vision, collaboration, credibility, communication, action orientation, feedback and recognition, accountability.
All these factors work in parallel when all we talk is safety, safety management systems and exemplary safety culture.
Here's a slideshare to testify the same.
After all, it starts with a personal commitment to workers first, not last!
#management #communication #safety #culture #collaboration
Webbing Sling
Here are the key points that are wrong in this picture:
- The sling is being choked around a sharp edge, which can cut and damage the sling material over time.
- There is no packing/protection on the sharp edge to prevent damage to the sling as it is lifted. Padding/packing should always be used on sharp edges to protect slings.
- Choking a sling increases the stress on it and reduces its working load limit. It's generally not good practice if it can be avoided.
- The choke may not be balanced/even, putting uneven stresses on different parts of the sling. An uneven choke could cause the sling to fail.
So in summary
Tool box talk : why accident occures
The document discusses the causes of workplace accidents. It states that accidents typically occur due to failures in the worker, tools used, materials used, or methods used. Unsafe acts by workers such as operating equipment unsafely, disconnecting safety devices, or taking shortcuts can lead to accidents. Unsafe acts may result from improper attitudes, lack of skills or knowledge, or reduced mental/physical capacities. Unsafe conditions in the workplace like defective equipment, improper guarding, or poor lighting can also cause accidents. To prevent accidents, the document recommends training workers, developing safe procedures, using proper tools, and selecting the right tool for each task.
Safe Rigging Practices
This document provides information on safe rigging practices when using cranes and rigging equipment. It notes that over 70% of crane accidents involve mobile cranes and are often due to negligence of safe rigging practices. Proper inspection and maintenance of equipment as well as ensuring operators are trained are emphasized. Guidelines are provided for inspection of wire rope slings, shackles, and general sling operating practices to prevent accidents and ensure safety.
Lifting & Rigging by NEIS
This document provides information on safe lifting and rigging practices. It discusses major causes of crane accidents like power line contact, overturns, falls from cranes, and mechanical failures. It also describes how to properly inspect hoisting and rigging equipment like slings, wire ropes, hooks, and chains. Specific criteria for when this equipment should be removed from service are provided. The document also outlines safe practices for manual lifting, carrying loads, and operating forklifts.
Promoting A Positive Health And Safety Culture
This document discusses promoting a positive health and safety culture within a fire department. It aims to make crews aware of the importance of a healthy and safe working environment. Key points covered include defining terms like duty of care, hazards, risks and risk assessments. The objectives are to understand what health and safety means, why it should be promoted, how it affects individuals and what it can achieve. Promoting these practices will help firefighters make better decisions, reduce accidents and ensure they can safely help others.
Behavior based safety
Behavior-based safety is a process that helps employees choose safe behaviors over unsafe ones through observation and feedback. It involves observing employees' behaviors, providing feedback on safe and unsafe behaviors, analyzing the data to measure improvements in safety over time, setting improvement goals, and reinforcing safe behaviors and goal attainment. When implemented successfully, it can result in increased efficiency, productivity, morale and profitability.
BBS Overview
This document discusses Behavior Based Safety (BBS), a program aimed at improving safety by focusing on behaviors. It provides an overview of BBS, explaining that BBS involves employees, drives safety improvement, and can lead to positive cultural changes when implemented correctly. However, BBS requires being part of an overall safety process and culture, and is not a replacement for compliance, training, or hazard removal. The document then discusses key aspects of implementing a successful BBS program, such as defining behaviors to observe and improve, understanding what drives both safe and unsafe behaviors, providing positive reinforcement, and focusing on achievements rather than failures.
New Employee Safety Orientation
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
Close protection
i have made this ppt for those who want to work efficiently in fiel of Security for Close protection
MSA Fall Protection
There are 751 deaths a year in the construction industry. Falls account for 35% of those fatalities. This presentation provides insights, safety tips and pointers on how to select the proper harnesses that will help protect your workers from deadly falls.
Working at height slides
The document provides information about working at heights training, including:
- The aims are to provide personnel working at heights with practical knowledge and application of safe practices to prevent injury.
- The objectives include identifying fall regulations and risks, demonstrating safety equipment use, and emergency response procedures.
- It discusses examples of working at heights, regulations and responsibilities to control fall risks, and the goals of reducing falls injuries.
Electrical Safety Joliet Distribution Center
This document provides an overview of electrical safety. It discusses the main electrical hazards of fire, shock, and burns. It defines important electrical terms and outlines safety rules and personal protective equipment requirements for working with electricity, including inspecting cords, locking out equipment during maintenance, and proper grounding. Personal responsibilities are to follow electrical safety rules and report any electrical deficiencies.
2014 CRW - Operating Cranes around Power Lines
Equipment contact with power lines remains one of the top concerns of crane and rigging professionals throughout the world. What is the impact of line voltages and working distances? This presentation identifys work zones, where to mark zones and how to prevent equipment and personnel encroachment in these areas. Mr. Smith also discusses the use of insulated links, non-conductive rigging, required signage and training requirements plus provide key elements of a power line safety system for mobile cranes on a jobsite. If your company is located outside the U.S. and not governed by OSHA rules, this presentation will showcase industry best practices which can be employed no matter where your jobsite is located.
Speaker: Bill Smith, Vice President, NBIS
Electrical hazards & safety training
Regards, Mr. SYED HAIDER ABBAS
MOB. +92-300-2893683 MBA in progress, NEBOSH IGC, IOSH, HSRLI, NBCS,GI,FST,FOHSW,ISO 9001, 14001,
'BS OHSAS 18001, SAI 8000, Qualified .
Portable tools risk assessment
This risk assessment identifies hazards associated with the use of portable power tools, including electricity, flammable atmospheres, moving parts, noise, vibration, ergonomics, slips and falls, dust, air lines, tool jamming, and inappropriate use. Control measures are outlined to reduce the residual risk for each hazard, such as checking tools before use, using guards and protective equipment, restricting use times, and ensuring users are trained. The risk assessment must be reviewed and signed by the assessor, supervisor, and safety coordinators.
Nylon Web Slings Inspection Checklist
Lifting slings made from nylon are the most common and versatile styles of slings. Since they can be used in many lifting applications there are several types of damage that can occur.
Our inspection and check list will not only describe the types of damage but will give tips to prevent damage.
Office safety awareness training
This document provides an overview of office safety training. It identifies potential hazards in an office like injuries, illness, ergonomic issues and accidents. It describes types of hazards like physical, chemical and biological. It provides guidance on safely using office equipment and furniture, handling chemicals, preventing slips/trips/falls and electrical safety. Recommendations include properly arranging computers and workstations, safe storage, good housekeeping and accident/injury reporting procedures. The goal is to create an accident-free work environment and increase safety awareness.
Electrical Safety and Risk Assessments
This document provides an overview of electrical safety and risk assessment. It discusses common electrical hazards like electric shock, burns, fires and explosions. The key causes of electrical accidents are identified as drilling into electrical cables, using defective equipment, and failure to follow lockout/tagout procedures. Electrical safety measures discussed include proper wiring, use of circuit breakers and disconnects, guarding live parts, adequate illumination and headroom, and grounding/bonding principles. Personal protective equipment and safety signage are also addressed.
What's hot (20)
Leadership Performance in Safety Management Systems.pdf
Leadership Performance in Safety Management Systems.pdf
Similar to PSC Lift-Mate Manual Lifting Aids
PSC Hands Free Safety Tools: Caught- Between Injuries
The most important tool that money can’t buy from Project Sales Corps the tool #1- The Correct Mindset. Accepting and letting go the natural reaction to go close and hold the rigging in place until the tension is taken up to make sure the load is properly slung and balanced needs to be changed. Remember the most hazardous part of a lifting operation is lifting off and landing and its important you are as far away from the load as possible.
Hoist technical manual
The document is a user manual for the P-200 portable track hoist. It provides descriptions and instructions for the proper use and maintenance of the hoist. The manual includes sections on product description, technical specifications, intended use, safety precautions, operating instructions, maintenance schedule, troubleshooting, and warranty information. The hoist is designed to lift individuals along a track that is mounted to ceilings or walls, to assist with transfers between locations such as beds and chairs.
Pool Lift brochure
The document discusses The Pool Lift Company, a specialist in disabled lift procurement and installation. It details the company's history and experience installing over 5,000 lifts. The company aims to provide outstanding customer service and accessibility solutions. It has various product lines that offer cost-effective compliance with regulations regarding accessibility.
PSC Hands-Free Safety Range 2023.pdf
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC Hands-Free Safety Tools Range 2023.pdf
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC Hands-Free Safety Range 2023.pdf
PSC Handle-tech Hose Lifter - An easy to handle light-weight device to lift hoses and pipes without the needs for placing under hoses or pipes and to improve ergonomics and productivity by simplifying hose handling.
PSC SAFEGUIDER ANTI-TANGLE TAGLINE
PSC SafeGuider Hi-Viz Anti-Tangle Taglines are specially designed to be a safer alternative
to ineffective and hazardous rope when guiding a suspended load. When a crane lifts an
object, it can swing into objects around it or power lines, or on personnel on the ground.
PSC SafeGuider Hi-Viz Anti-Tangle Taglines, attached to the load as it swings on the
crane’s hook so that it doesn’t collide with objects around it. Using PSC SafeGuider Hi-Viz
Anti-Tangle Taglines you can eliminate potential hand injuries and unnecessary delays
created by out-of-control loads during lifting and moving. Available in 10’, 15’, 20’, 25’, 30’,
35', 40’ lengths., the PSC SafeGuider Hi-Viz Taglines are tangle-resistant and knot-free and
feature a high visibility coating to repel corrosive material and visibility in low light
situations. They always retain their shape and are easily rolled up for storage.
Raah safety catalog All Product
raah safety catalog full version
RAAH Safety offers Specialised Safety Solutions for clients in the Oil and Gas Industry, Petrochemical and Refineries, Marine and Shipbuilding, Manufacturing, Engineering, Mining, Construction and Aviation industries.
Raah safety catalog All Product
raah safety catalog full version
RAAH Safety offers Specialised Safety Solutions for clients in the Oil and Gas Industry, Petrochemical and Refineries, Marine and Shipbuilding, Manufacturing, Engineering, Mining, Construction and Aviation industries.
Overhead Crane Safety by Pennslyvania L&I
This document provides an overview of overhead crane safety. It defines overhead cranes and lists their main parts. It describes the types of inspections that must be performed on cranes, including initial, frequent, periodic and annual inspections. It also covers crane operations, rigging, sling safety, and maintenance procedures. The key points are to inspect cranes and slings thoroughly before each use, follow load rating limits, and only have trained operators run cranes to prevent accidents.
PSC Hands-Free and Hand-Off Tools Ebook
We are India distributors for the most exhaustive range of products that helps minimise/eliminate hand injuries in the workplace. Our focus is on the offshore and onshore drilling rigs and oil and gas industry where a huge amount of lifts are performed. It’s a very challenging environment due to rig movements, confined areas, wind effects, etc. We stock Impact Protection Gloves ‐ KONG™, Mechanix®, HexArmor®, Ringers, Superior Gloves, MCR; hands‐off tools PSC Fingersaver, PSC Shove‐it, PSC Alpenco,PSC LoadGuider and PSC SafeGuider Taglines, PSC Ergonomix, PSC LoadGuider Hands-Off Push/Pull Tools and more in India. Unlike other safety suppliers, our efforts is focussed on improving hand safety in workplaces.
Active Uni-flex Flexible Conveyor Brochure
The document provides information about Uni-Xu conveyors, including:
- Uni-Xu conveyors have been integral to turnkey solutions for demanding companies across Europe for their robust design and durability.
- The modular design offers flexibility for integrated systems and it has been engineered in Britain since 1963, resulting in five decades of engineering excellence.
Active Uni-flex Flexible Conveyor Brochure
The document provides information on the Uni-xu® range of flexible conveyors, which are modular and durable. They are used in demanding applications across Europe and are known for their robust design and quality. The document describes several types of flexible conveyors that Uni-xu® offers, including powered roller conveyors, gravity roller conveyors, gravity skatewheel conveyors, and Lite conveyors. It provides specifications, features, and applications for each conveyor type.
Active Uni-flex Flexible Conveyor Brochure
The document provides information on the Uni-xu® range of flexible conveyors. It summarizes that the Uni-xu® conveyors have been integral to turnkey solutions for demanding companies across Europe for over 50 years due to their robust design and modularity. The document then provides details on the various types of flexible conveyors Uni-xu® offers, including powered roller, gravity roller, gravity skatewheel, and Lite conveyors. It describes the key features and specifications of each conveyor type.
RAAH Group Inc - Safety Brochure.pdf
RAAH GROUP INC focuses on innovative and specialized safety solutions in United states. we do Procurement supply for Projects its clients in the Oil and Gas Industry, Petrochemical and Refineries, Marine and Shipbuilding, Manufacturing, Engineering, Mining, Construction and Aviation industries.
Visit our website https://raahinc.raahgroup.com/
Email for quote: salesUSA@raahgroup.com
Overhead cranes and safety
Overhead cranes are suspended cranes used in factories to lift heavy loads. They consist of a hoist mounted on a trolley that moves along an overhead beam. The beams are usually mounted along the walls of a factory building. Overhead cranes have either a single beam or double beam construction. Their structure includes a boom system, electrical system, hydraulic system, turntable assembly, operator's cab, and chassis. Proper maintenance and safety precautions are important when operating overhead cranes to prevent accidents from overloading, improper hoist movement, not adhering to load limits, and other operator errors regarding stability and use of safety brakes.
CDD2updated-Dimensions-allproducts.pdf
Here are the key factors to consider when selecting a Coffing hand chain hoist:
Capacity - The maximum weight the hoist can safely lift. Select a hoist rated higher than your maximum anticipated load.
Lift - The vertical distance the hook can travel. Select a lift height sufficient for your application.
Hand Chain Drop - The distance the hand chain extends below the hoist body. Consider adequate clearance needed below the hoist.
Other factors:
- Duty cycle - How often the hoist will be used (light, moderate or heavy duty applications)
- Environmental conditions - Indoor/outdoor use, temperature extremes, hazardous locations
- Hook arrangement - Hook only or hook and
0264 GustoMSC_PowerPointTemplate_08_2010[1].PPT
The document provides information about commissioning and load testing a 5000 tonne crane. It includes details on safety plans, organization of the testing team, objectives of commissioning and testing, load testing procedures, equipment used for testing like pontoons and weights, and procedures for lowering and raising the crane's A-frame. It also outlines activities to be completed after load testing such as examining components for damage and verifying bolt torques.
Oh8000
This document provides installation instructions for an OH8000 overhead automotive lift with an 8,000 lb capacity. It includes specifications for the lift as well as requirements for the installation site and foundation. The instructions describe how to prepare the site, set up the lift columns, drill anchor holes, run cables and hoses, and complete the installation. Safety cautions are provided regarding lifting equipment, drilling into concrete, and ensuring the foundation and lift are properly secured before use.
Hi Lift Jack Workshop for 4x4 Offroad Vehicles
Slides from a workshop detailing the correct use of a Hi Lift Jack for safe recovery during an offroad excursion.
Similar to PSC Lift-Mate Manual Lifting Aids (20)
PSC Hands Free Safety Tools: Caught- Between Injuries
PSC Hands Free Safety Tools: Caught- Between Injuries
More from Project Sales Corp
PSC Dropped Objects Prevention Guidebook.pdf
Drop is any object that falls from its previous static position under its own weight. Dropped Objects are among the Top 10 causes of Fatality and Serious Injury in the Oil and Gas Industry. Our focus would be on products and systems that can be integrated into the customer’s safety management systems to identify potential dropped object hazards, prevent their occurrence, and mitigate their outcome. We would share information on a broad array of tools, products and deliverables, including inspection programmes, awareness videos and presentations, safety checklists, guidelines, procedures and best practices as a part of building up awareness on DROPS and also offer our customers to buy these special dropped object prevention products and services from one source.
Managing Suspended Loads Presentation- 2024
Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
PSC Gulf FZCO Dubai - Global Sourcing Now Made Easy
The Marketing Services Unit of PSC Dubai in Silicon Oasis DDP is responsible for business development and trading of our key brands in the Industries worldwide. The portfolio includes oilfield equipments, bar and rod mill spares (pinch rolls, guide rollers, HSS rolls, etc) and PSC Hands-Free Safety Tools.
Description:
International sourcing company based in Dubai Free Zone.
Focus:
Specializes in equipment, spare parts, and consumables
procurement.
Backed By:
Supported by Project Sales Corp, a leading rig parts supplier in
India.
Offerings:
Supplies PPE, workplace safety gear, and oilfield lubricants.
Mission:
Importing products needed by drilling rig operators in India.
Competitive Pricing:
Quotes competitive prices for imported goods.
Location Advantage:
Located in a Free Trade Zone, exempt from VAT and Customs.
PSC Ropes Soaps Dopes Guidebook 2024.pdf
With over thousands of products in its stocking range, Project Sales Corp is undoubtedly India’s largest oilfield ropes, soaps, dopes store. We call it the Rig Essentials Line.
Take a look inside to see some of the key products that we stock in this category of MRO, Tools, Safety and Rig Essentials. Whether you are a rig operator or an oilfield supplier, you will find consolidating your purchases with us for the items we stock would be the right way to service your end-users requirement the quickest way!
How We Work
Imagine using a $200 a pail dope and using a $1 dope brush, the savings you have with the brush costs, you don’t realise the loss you incur with the dope as a faulty brush creates pilferage of materials, improper application of dopes and overall a total higher costs than the savings you made buying the cheap dope brush.
Keeping this logic in mind that a cheap substitute ultimately costs more in total costs, Project Sales Corp has built up a portfolio of proven good quality high performance products from India and worldwide used on-board drilling rigs. They improve reliability, reduce overall costs, downtime and provide user a peace of mind with daily essentials on the rig.
We don’t stock the quality that generally sells in the local markets, we bring in products that have proven themselves in being able to make a positive difference. That’s sums up our strategy to this core product category – The rig essentials line of Ropes, Soaps, Dopes that has contributed over $25 million of revenues in last 10 years.
The daily materials used on a rig are colloquially referred to as Rope, Soap, and Dope.
➢ Rope referred to chains and ropes used to hoist materials up to derricks and platforms
➢ Soap was used in reference to products and tools used to clean machinery, tools, the rig, and the workers themselves
➢ Dope meant the lubricants, grease, and fuel - the essential liquids that were employed to keep machinery and the rig up and running.
PSC India Workplace Safety Guidebook 2024
Our workplace safety range comprises of products that can mitigate various kinds of risks in workplace or improve safety facility identification to assist workers with working in a safer environment. Key products include Slips Trips and Falls protection with Anti-skid tapes, Barricading Tapes, Lane Marking Tapes, 5S Program, Utility Hooks for Cables and Hoses, Facility signages, Traffic control products, and more. We also stock scaffolding and ladder tags, small instrument tagging systems like Microtags and Nanotags, Confined Space Entry Kits, etc. PSC Whipchecks are used as hose restraints to prevent hoses from whipping. The Nightstick range of intrinsic safety flashlights range with world’s first dual light improves safety with visibility for near and far objects, at the same time. Safepads improve safety while working with scaffold and all kinds of protruding objects.
PSC India - Rig Spares Supplied - Examples .pdf
PSC Houston Oilfield Supplies LLC aims to supply OEM parts to drilling rigs worldwide. With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
Based out of Houston, PSC Houston Oilfield Supplies LLC can quickly ship out parts to the rigs thus reducing downtime. There is nothing in specific we stock, and there is no limit to what we can source, you just need to let us know. We can reach out to our extensive vendor base and find out the source with the quickest delivery.
With trained international sourcing teams supporting from India, Dubai and Houston, you can expect to get the fastest response to your requirements. Our India unit Project Sales Corp (PSC) stocks over a 1000 sku’s of stuff that goes out to the oilfield and services all the drilling contractors, EPC companies in offshore and oilfield services companies. PSC Gulf supplies parts to some of the leading operators in the Middle East. The PSC Houston office works closely with the OEMs to get you the most competitive pricing and the shortest lead time for critical parts.
With a team of 40 people spread across our offices, all focussed on one thing – drilling rig parts- we are just an email or call away.
PSC Supplier Partners List 2024 - Global
With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
With offices in India, Dubai and US, we can deliver rig spares worldwide.
PSC SPECIALITY LUBRICANTS GUIDEBOOK 2024
Lubrication accounts for a small part of the overall maintenance budgets and the right lubricant goes a long way to reduce downtime, improve reliability and enhance equipment life.
Leading bearing manufacturers have conducted studies to find out the reasons for premature bearing failure. More than one-third of bearing failures is due to imperfect lubrication. In many more cases, which cannot be traced directly to imperfect lubrication, it’s still the underlying cause.
PSC India Sealing Compounds Guidebook 2024
Project Sales Corp is pleased to introduce its Sealing Compounds range. We represent one of the most exhaustive range of Sealing Compounds from around the world that finds application in sealing steam and gas turbines, compressors, pumps, gearboxes, flanges and more.
An ideal flanged joint would consist of two, mirror-finish, perfectly flat and parallel surfaces bolted directly together to create a leak-free seal. However, manufacturing processes do not allow for perfect sealing surfaces. Most flange faces have surface irregularities that cannot be sealed without the use of some type of compressible, resilient material or a combination of materials between them to seal the fluid being transferred. This is true even for the most finely machined surfaces as a turbine flange where the surface asperities can create a leak situation.
PSC Guide-it SlingGrab Hand Safety Tools
Slung loads are dangerous. Going close to it exposes one to various injuries, pinch, crush and foot and body injuries. There is tension in the load until it rests in the final position. There are obvious chances of injuring the fingers and hands and getting too close to the red zone where a suspended dropped object could fall on the foot or body. You also expose yourself to lacerations and abrasion when the object you are trying to guide is sharp or rough.
PSC introduces the PSC Guide-it SlingGrab, a simple to use load positioning tool to manage slung loads by using the special head designed for chains and wire rope slings, webbing slings, to grab and manoeuvre the slung loads while it moves to its final position. Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
Available in 4 lengths and competitively priced, you can now make it a rule, no grabbing slings by hand, always use a PSC Guide-it SlingGrab. Please see attached for more details.
www.pschandsafety.com
www.pschandsfree.com
GasGrab - Project Report on Cylinder Lifting and Benefits with GasGrab
In 2007 Bradford University carried out a study of the GasGrab™. The 34 page report that came from this study includes a large amount of technical data that highlights the health and saftey benefits of using GasGrab™ when lifting gas cyclinders.
Click here to download and view the report.
Gasgrab™ is a property of Arrow (Newbury) Ltd and is marketed in India by Project Sales Corp www.pschandsfree.com
MOTORS IN STOCK.pdf
The document lists 25 motors that are currently in stock, including their manufacturer, specifications, and quantity available. The motors range in horsepower from 1/2 HP to 5 HP, have speeds from 1100 RPM to 3450 RPM, and voltages from 115/230V to 460V. Manufacturers include Emerson, GE, Reliance Electric, Baldor, Marathon, and Lincoln.
RING GASKETS IN STOCK.pdf
The document is a list of 57 different gasket part numbers, materials, and quantities. It includes information such as part number (ex: RX54), material (ex: API.6A Low Carbon Steel), and quantity of each part number (ex: 13 R*). The gaskets are made from various materials like low carbon steel, soft iron, 304SS, 309SS, and 316SS.
Man-Made-Mineral-Fibre-MMMF-Filter-Masks from PSC.pdf
This document provides information on man-made mineral fibre filter masks produced by FlameSkill Ltd, including the company's address and contact information, materials used in the masks, certifications held, product number, pricing, and place of origin for orders. The masks meet European safety standards and use polypropylene and other plastics for the facepiece, straps, and filters, as well as natural rubber for valves.
PSC TASK SPECIFIC GLOVE GUIDE-BOOK (3).pdf
- PSC is a hand safety specialist company in India that stocks over two dozen variants of impact protection and non-impact gloves for tasks in industries like oil and gas.
- The document provides details on various glove models from brands like Ironclad and Kong, describing their features like impact protection, cut resistance, grip, and dexterity suited for different industrial tasks.
- Glove options mentioned include utility gloves, mechanics gloves, impact protection gloves, anti-vibration gloves, cut resistant gloves, and deck crew gloves.
PSC Hands-Free Safety Tools 2023
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
Stock - Filters.pdf
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Stock - Ballasts.pdf
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Stock - Junction Boxes.pdf
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC Stock of FRL Units.pdf
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
More from Project Sales Corp (20)
PSC Gulf FZCO Dubai - Global Sourcing Now Made Easy
PSC Gulf FZCO Dubai - Global Sourcing Now Made Easy
GasGrab - Project Report on Cylinder Lifting and Benefits with GasGrab
GasGrab - Project Report on Cylinder Lifting and Benefits with GasGrab
Man-Made-Mineral-Fibre-MMMF-Filter-Masks from PSC.pdf
Man-Made-Mineral-Fibre-MMMF-Filter-Masks from PSC.pdf
Recently uploaded
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
How to Buy an Engagement Ring.pcffbhfbfghfhptx
Dive into this presentation and learn about the ways in which you can buy an engagement ring. This guide will help you choose the perfect engagement rings for women.
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Innovative Uses of Revit in Urban Planning and Design
Discover innovative uses of Revit in urban planning and design, enhancing city landscapes with advanced architectural solutions. Understand how architectural firms are using Revit to transform how processes and outcomes within urban planning and design fields look. They are supplementing work and putting in value through speed and imagination that the architects and planners are placing into composing progressive urban areas that are not only colorful but also pragmatic.
How HR Search Helps in Company Success.pdf
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsSustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Transport Solution
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.Recently uploaded (20)
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Innovative Uses of Revit in Urban Planning and Design
Innovative Uses of Revit in Urban Planning and Design
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
PSC Lift-Mate Manual Lifting Aids
- 1. www.pschandsfree.com PSC Lift-Mate Lifting Aids PSC Lift-Mate Manual Handling Aid - Single Handle 1. To aid with the safer handling of pipe, ironwork, and tubing sections. 2. Reduces unnecessary bending and lifting 3. Easy to fit - simply pass the strop under the load then pass handle through the a. strop eye to make a "choke" hitch. Alternatively, the eye may be slipped over the pipe ends b. Warning: this product is for manual handling only and should not be used as part of any rigging or mechanical lifting arrangement 4. Working Load Limit (WLL): 75kg 5. Minimum Breaking Load: 750kg Ordering Code PSC-SH-100 50mm X 900mm LONG
- 2. www.pschandsfree.com PSC Lift-Mate Manual Handling Aid - Double Handle 1. To aid with the safer handling of pipe, ironwork and tubing sections. 2. Reduces unnecessary bending and lifting 3. Easy to fit - simply pass one handle under the load so that the strop wraps around the pipe section 4. Lift by cradling the load, with each operator taking up a handle, one each side of the load 5. Warning: this product is for manual handling only and should not be used as part of any rigging or mechanical lifting arrangement 6. Working Load Limit (WLL): 100kg 7. Minimum Breaking Load: 1000kg Ordering Code PSC-DH-100 50 mm X 1500 mm LONG
- 3. www.pschandsfree.com PSC Lift-Mate Choke Valve Strop Design to aid in the safer handling of chicksan valves. To fit simply pass the handling straps under the valve connection butts. The strop with the adjacent velcro retaining strap should be passed under the male connection. Once in place, pass the velcro strap under the opposite side horizontal link strop and secure back on itself. 1. Reduces unnecessary bending and lifting 2. Easy to fit 3. Lift by cradling the load, with each operator taking up a handle, one each side of the load 4. Working Load Limit (WLL): 50kg 5. Minimum Breaking Load: 500kg Ordering Code PSC-CV For more information email us at Shivani@projectsalescorp.com Project Sales Corporation 28 Founta Plaza Suryabagh Visakhapatnam 530020, India