The AIM (Annular Injection Mixer) is a patented device that uses turbulent mixing to efficiently disperse and homogenize injected liquids into process streams. It minimizes chemical consumption through optimized momentum transfer and pressure drop. The compact design injects fluids through single or multiple ports for gaseous, liquid, or multiphase flows. It resembles a venturi with inlet and outlet cones to enhance dispersion and provides energy recovery with low pressure drop. Applications include diluent injection, pH control, and corrosion/scale inhibition with benefits like reduced chemical use and easy retrofitting.
Chemical Industry Case Study: High Speed Dispersion of BentoniteMatt Smith
Find the solution for one of the toughest mixing applications in the chemical industry, dispersing bentonite. Read this case study on the Process, the Problem and the Solution.
Chemical Industry Case Study: High Speed Dispersion of BentoniteMatt Smith
Find the solution for one of the toughest mixing applications in the chemical industry, dispersing bentonite. Read this case study on the Process, the Problem and the Solution.
Mixing instructions_CALUMEX UPC WHITE - CALMIX mortarsCALTRA BV
MIXING PROTOCOL - the right way of mixing CALUMEX UPC WHITE and CALMIX mortars - #polished_concrete #UPC_WHITE #CALUMEX #CALMIX #Tri_Al_Afbouw #white_countertop_mix
Ribbon Blender is Widely used in different industries like pharmaceutical, plastic, engineering, food, chemical & many more. It is Working capacity from 5 – 10,000 liters.
Inflatable seals work by introduction of an inflation pressure into the cavity of the inflatable seals. This inflation pressure causes the displacement of the seals effecting a positive seal between the seals and the surface to be sealed. Once the seals inflation pressure is removed the seal returns to its uninflated position (memory).
West Polyrub Products Pvt. Ltd. seals are made from high strength FDA approved silicone and are supplied in our corporate colours of transperent & red favoured by the food industry. Other colours are available to special order.
please visit www.westpolyrub.com for further information
Inflatable seals work by introduction of an inflation pressure into the cavity of the inflatable seals. This inflation pressure causes the displacement of the seals effecting a positive seal between the seals and the surface to be sealed. Once the seals inflation pressure is removed the seal returns to its uninflated position
Used for short/long term urine drainage
Made from natural latex rubber
Silicon elastomer coated smooth surface for atraumatic catheterization
High strength polymer layer in the middle layer of the catheter ensures wider inner diameter and hence high flow rate
Minimises encrustration and subsequent catheter blockage and failure
Smooth eye, ultra thin highly elastic balloon and hard non-return valve for trouble free inflation and deflation
Mixing instructions_CALUMEX UPC WHITE - CALMIX mortarsCALTRA BV
MIXING PROTOCOL - the right way of mixing CALUMEX UPC WHITE and CALMIX mortars - #polished_concrete #UPC_WHITE #CALUMEX #CALMIX #Tri_Al_Afbouw #white_countertop_mix
Ribbon Blender is Widely used in different industries like pharmaceutical, plastic, engineering, food, chemical & many more. It is Working capacity from 5 – 10,000 liters.
Inflatable seals work by introduction of an inflation pressure into the cavity of the inflatable seals. This inflation pressure causes the displacement of the seals effecting a positive seal between the seals and the surface to be sealed. Once the seals inflation pressure is removed the seal returns to its uninflated position (memory).
West Polyrub Products Pvt. Ltd. seals are made from high strength FDA approved silicone and are supplied in our corporate colours of transperent & red favoured by the food industry. Other colours are available to special order.
please visit www.westpolyrub.com for further information
Inflatable seals work by introduction of an inflation pressure into the cavity of the inflatable seals. This inflation pressure causes the displacement of the seals effecting a positive seal between the seals and the surface to be sealed. Once the seals inflation pressure is removed the seal returns to its uninflated position
Used for short/long term urine drainage
Made from natural latex rubber
Silicon elastomer coated smooth surface for atraumatic catheterization
High strength polymer layer in the middle layer of the catheter ensures wider inner diameter and hence high flow rate
Minimises encrustration and subsequent catheter blockage and failure
Smooth eye, ultra thin highly elastic balloon and hard non-return valve for trouble free inflation and deflation
SAIZONER Mixer Granulator is designed to meet special needs of tablet manufacturing technology. Tapasya Engineering offers rapid mixer, oscillating & high shear mixer granulator, planetary and plough shear mixer.
Visit : http://www.tapasyaindia.net
Design and analysis of control valve with a multi stage anti cavitation trimnaz4u
Valves are the components in a fluid flow or pressure system that regulate
either the flow or the pressure of the fluid. This duty may involve stopping
and starting flow, controlling flow rate, diverting flow, preventing back
flow, controlling pressure, or relieving pressure.
Brother filtration Max Pleated A series filtration systemBrother Filtration
High flow filter cartridge mainly to replace from Pall ultipleat and marksman type filter. Flexible and professional design for your application, high temperaure and pressure goods are available.
Hydraulic parts
Công ty TNHH thiết bị kỹ thuật Đà Nẵng
Chuyên cung cấp kích thủy lực enpos, đột thủy lực enpos,....
Liên hệ: 0918.434.694 để đặt hàng và tư vấn một cách tốt nhất.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
1. FEATURES
The patented design of the AIM creates intense, balanced turbulence in the mixer
for optimized utilization of momentum transfer, measured as pressure drop across
the AIM. The compact, high performance AIM minimizes chemical consumption
by improving dispersion and mixing in the process stream for gaseous, liquid and
multiphase fluid flows.The mixer is available with single and multiple injection
ports in the same unit, is robust in design, and requires minimal maintenance.
DESIGN
The AIM design is similar to a venturi, with inlet and outlet cone sections.
The upstream cone increases process flow velocity and pressure to enhance
dispersion of the injected fluids. The downstream cone adds turbulence through
the expanding cross-sectional area, simultaneously providing energy recovery
while reducing the overall pressure drop across the unit. The area behind the
neck of the cones offers volume for the injected fluid to be evenly distributed
over the cross-sectional area of the pipe, yielding uniform injection.
APPLICATIONS
• Diluent Injection
• pH Control
• Demulsifier
• Corrosion Inhibitor
• Scale Inhibitor
• Chlorination
BENEFITS
• Reduced Chemical
Consumption
• Low Pressure Drop
• Inline Solution
• Easily Retrofitted
• 3 in 1 solution – Injection,
Dispersion, and Homogenization
• 25 - 50% reduction in
chemical consumption
• ROI 1 year
• 10 Year IRR 25%
Driven By Process Fluid Momentum – Delivering
High Efficiency Mixing At Low Differential Pressures.
prosep.comAIM PRODUCT SPECIFICATIONS
AIM
Annular Injection Mixer
2. AIM
Annular Injection Mixer
THE MIXING PROCESS
Process flow velocityincrease through
restriction: Local dynamic pressures increase.
Annular injection ring for even distribution: Shear
stresses evenly applied to injected fluid over cross
sectional area of pipe.
Inertial force over surface tension favors
droplet breakup: Slip edge allows inertia to
disperse injected fluid.
Turbulent mixing conditions created: Expanding
pipe diameter creates turbulent mixing conditions.
Injection holes for
even distribution
Process flow
increases velocity
through restriction
prosep.comAIM PRODUCT SPECIFICATIONS
C100 (ProMix) Liquid Flow Rate MBPD (M3/h) Dimension (inches) Approx.Weight (lbs)
Mixer Size Minimum Maximum 150# 300# 600# 150# 300# 600#
2” 2 (13) 3.3 (22) 20 20.5 20.75 34 38 64
3” 5 (33) 7.5 (50) 26.5 27.25 27.5 56 65 81
4” 9 (60) 13 (86) 34 34.75 36 76 94 126
6” 20 (132) 30 (200) 48 48.75 50.25 114 178 208
8” 35 (232) 54 (360) 64 64.75 66.5 216 294 354
10” 56 (371) 85 (565) 79 80.25 83 308 441 507
12” 80 (530) 120 (795) 93 94.25 96.125 479 659 739
14” 110 (730) 160 (1060) 107 108.25 110 603 857 1017
16” 145 (960) 210 (1390) 120 121.5 124 813 1153 1338
18” 180 (1190) 270 (1790) 134 135.5 137.5 993 1492 1712
20” 220 (1460) 340 (2250) 149.375 150.75 153 1244 1924 2147
24” 270 (1790) 490 (3250) 176 177.25 180 2019 2942 3002
26” 380 (2520) 560 (3710) 187 191.5 194.5 540 1230 1280
Inertial force over surface
tension favors droplet breakup
Turbulent mixing
conditions created
Specifications included in above chart are provided as reference only. ProSep Mixers are fully customizable based on customer requirements.
Weights and dimensions provided in this document are approximate.