Maxxion DRM 1+5 water based products are concentratrates that are diluted at the point of application and sprayed on the shuttering surface and left to dry before pouring the concrete. . It facilitates quick, easy and clean release of concrete from forms. It provides a smooth, flat surface, free of voids and defects. It does not transfer from forms and it leaves concrete surfaces unstained, ready for re-use almost instantly. It is the CHEAPEST oil available in terms of cost per sqft applied. POWER RELEASE OIL contains mould release fluid used extensively for poured concrete structures with plywood, hardboard ..To be applied on horizontal surface ONLY. Works on vertical surface only after drying, but needs to be applied on horizontal shuttering surface.