We at JGB Enterprises, Inc. take great care to ensure your product comes out tasting just as great as it did going in. JGB Enterprises supplies hoses and fittings that meet 3A, FDA and USDA standards for the pure transfer of solids and liquids. Dairy Delivery Hose and Dairy Hose Assemblies are for milk, beer, wine, distillery and beverage (edible liquid) transfer processing facilities; To Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. Dairy Delivery Hose are ideal for applications requiring flexible and/or tight bend connections. All hoses are FDA/USDA compliant & conforms to a 3-A Sanitary Standard.
Mechanical Stabilization of Rigid PVC CompositionsTom Pedersen
Mechanical Stabilization of Rigid PVC Compositions presented at the International Plastic Pipes Conference and Exhibition, by Thomas C. Pedersen & Robert R. Kwapisz, Jr.
Klüberoil 4 UH1 N is a synthetic gear and multipurpose oil for use in the food and pharmaceutical industries. It meets various industry standards including being registered as NSF H1 and FDA compliant. It has a high oxidation stability and resistance to wear and corrosion, providing long service life. The product is available in various viscosity grades suitable for different applications and temperatures in the food and pharmaceutical sectors.
Gray PVC Discharge Hose is for light duty water discharge service in agricultural, quarry, irrigation, mining, construction and industrial applications.
CASSIDA GREASE HTS 2 is a high-performance, high-temperature synthetic grease developed for food and beverage processing equipment. It is certified by NSF for ISO 21469 and registered by NSF Class H1 for potential incidental food contact. The grease provides excellent high-temperature performance up to 220°C, good water resistance, and effective corrosion prevention for plain and rolling element bearings in centralized lubrication systems.
This document discusses advanced materials used in wind turbine manufacturing. It covers tooling materials like modeling pastes and infusion systems. It also discusses the three main composite manufacturing processes: wet lay-up, infusion, and prepreg. For each process, the document provides details on adhesive resin systems suitable for that process from Huntsman Advanced Materials, including key properties and performance data. It also discusses structural adhesive options for bonding turbine components like shells and shear webs.
La energía eólica es la fuente de energía de mayor crecimiento en el mundo, este tipo de energía aporta a la industria y las empresas electricidad limpia y renovable.
Hoy en día, el diseño de los aerogeneradores y las turbinas de los molinos se está volviendo cada vez más complejo y sofisticado, para poder construir parques eólicos que puedan operar en condiciones altamente exigentes en lugares en alta mar y en climas fríos y / o cálidos.
Huntsman Advanced Materials es un apasionado de mejorar la calidad de vida de las personas en todo el mundo. Desde hace más de una década, la compañía se centró en apoyar la cadena de valor de la energía eólica. Los equipos de Investigación y Desarrollo, así como el equipo de asistencia técnica, han trabajado estrechamente con la industria y con todos los principales fabricantes de equipos de energía eólica para desarrollar la tecnología más avanzada que mejora los índices de resistencia / peso y los requisitos de fatiga.
Huntsman Advanced Materials produces a range of thermosetting composite resin systems for various manufacturing industries. They offer technical support and expertise to help customers optimize processes and develop customized solutions. Their product range includes resin formulations for wet layup, resin transfer molding, infusion, filament winding, and other composites manufacturing methods. Huntsman works with customers to select the best resin system for their needs, improve quality and performance, and accelerate time to market.
This document summarizes Huntsman Advanced Materials' composite solutions for the automotive industry, including fast curing resin systems for body structures and leaf springs. It outlines various epoxy resin systems tailored for different composite manufacturing processes like wet compression molding, resin transfer molding, and a new dynamic fluid compression molding process. It also provides property data and descriptions of resin systems qualified for automotive wheel and preform production. Simulation tools are discussed which can optimize composite part design and manufacturing.
Mechanical Stabilization of Rigid PVC CompositionsTom Pedersen
Mechanical Stabilization of Rigid PVC Compositions presented at the International Plastic Pipes Conference and Exhibition, by Thomas C. Pedersen & Robert R. Kwapisz, Jr.
Klüberoil 4 UH1 N is a synthetic gear and multipurpose oil for use in the food and pharmaceutical industries. It meets various industry standards including being registered as NSF H1 and FDA compliant. It has a high oxidation stability and resistance to wear and corrosion, providing long service life. The product is available in various viscosity grades suitable for different applications and temperatures in the food and pharmaceutical sectors.
Gray PVC Discharge Hose is for light duty water discharge service in agricultural, quarry, irrigation, mining, construction and industrial applications.
CASSIDA GREASE HTS 2 is a high-performance, high-temperature synthetic grease developed for food and beverage processing equipment. It is certified by NSF for ISO 21469 and registered by NSF Class H1 for potential incidental food contact. The grease provides excellent high-temperature performance up to 220°C, good water resistance, and effective corrosion prevention for plain and rolling element bearings in centralized lubrication systems.
This document discusses advanced materials used in wind turbine manufacturing. It covers tooling materials like modeling pastes and infusion systems. It also discusses the three main composite manufacturing processes: wet lay-up, infusion, and prepreg. For each process, the document provides details on adhesive resin systems suitable for that process from Huntsman Advanced Materials, including key properties and performance data. It also discusses structural adhesive options for bonding turbine components like shells and shear webs.
La energía eólica es la fuente de energía de mayor crecimiento en el mundo, este tipo de energía aporta a la industria y las empresas electricidad limpia y renovable.
Hoy en día, el diseño de los aerogeneradores y las turbinas de los molinos se está volviendo cada vez más complejo y sofisticado, para poder construir parques eólicos que puedan operar en condiciones altamente exigentes en lugares en alta mar y en climas fríos y / o cálidos.
Huntsman Advanced Materials es un apasionado de mejorar la calidad de vida de las personas en todo el mundo. Desde hace más de una década, la compañía se centró en apoyar la cadena de valor de la energía eólica. Los equipos de Investigación y Desarrollo, así como el equipo de asistencia técnica, han trabajado estrechamente con la industria y con todos los principales fabricantes de equipos de energía eólica para desarrollar la tecnología más avanzada que mejora los índices de resistencia / peso y los requisitos de fatiga.
Huntsman Advanced Materials produces a range of thermosetting composite resin systems for various manufacturing industries. They offer technical support and expertise to help customers optimize processes and develop customized solutions. Their product range includes resin formulations for wet layup, resin transfer molding, infusion, filament winding, and other composites manufacturing methods. Huntsman works with customers to select the best resin system for their needs, improve quality and performance, and accelerate time to market.
This document summarizes Huntsman Advanced Materials' composite solutions for the automotive industry, including fast curing resin systems for body structures and leaf springs. It outlines various epoxy resin systems tailored for different composite manufacturing processes like wet compression molding, resin transfer molding, and a new dynamic fluid compression molding process. It also provides property data and descriptions of resin systems qualified for automotive wheel and preform production. Simulation tools are discussed which can optimize composite part design and manufacturing.
This document provides information on Huntsman Advanced Materials' insulation solutions for various applications in electrical engineering, including generators and motors, insulators and bushings, switchgears, and dry-type distribution transformers. It describes product lines such as Araldite and Aradur casting and impregnation systems, highlighting their key properties like thermal resistance, flame retardancy, mechanical strength, and chemical resistance. Tables provide details on specific product formulations, their characteristics and recommended manufacturing processes. The document aims to demonstrate Huntsman's expertise and solutions for meeting stringent electrical engineering insulation requirements.
Araldite® FST 40002 / 40003 is an epoxy resin designed for producing interior composite parts for aerospace applications. It has unique properties including high mechanical performance, fire resistance, and compatibility with resin transfer molding, infusion, and pultrusion processes. These properties allow for the efficient production of structural carbon and glass composite parts with maximum weight savings.
This document discusses various types of food grade hoses and pipes. It provides information on hoses of different lengths from 5m to 10m that are suitable for use in caravans, motorhomes, and boats. It also discusses longer coils of suction and discharge hoses for use in food manufacturing. The hoses and pipes discussed comply with European directives for materials that contact food and are resistant to chemicals commonly found in food processing.
This document summarizes the specifications of an Avalanche 2000 II snowmaking hose produced by JGB Enterprises. The hose features a black thermoplastic liner that reduces friction compared to conventional liners, as well as a woven polyester reinforcement and cover. It can operate down to -55 degrees Fahrenheit and is available in standard lengths of 50 and 100 feet, as well as custom lengths. It uses internally expanded aluminum or quick disconnect couplings. Pressure and burst ratings are provided for different inner diameters. Contact information and locations are listed for JGB Enterprises.
Function and Performance of Hydrocarbon Waxes in Rigid PVCTom Pedersen
The document discusses the function of hydrocarbon waxes in rigid PVC. It explains that waxes with carbon numbers of C30 to C36 work best as primary lubricants for PVC in North America. The lubricant system must be carefully adjusted to match the specific processing equipment used by each PVC manufacturer. Getting the lubrication right is crucial but complex, requiring in-depth technical support from wax suppliers.
STABUTHERM GH 461 and 462 are high-temperature greases used for lubricating rolling bearings up to 180°C and in centralized lubrication systems up to 200°C. They provide benefits such as lower lubricant and waste disposal costs, reduced bearing costs, and trouble-free machine operation. The greases are mineral oil-based with a polyurea thickener, offer good wear protection and corrosion resistance, and can be pumped through common lubrication systems for applications such as rolling mills, continuous casting installations, and furnaces.
Klüberfood NH1 87-703 Hyg is a synthetic grease that contains an antimicrobial additive to protect against microbial degradation. It is suitable for lubricating valves, fittings, and low-speed bearings containing EPDM seals in food processing and pharmaceutical equipment. The grease extends service intervals, provides high resistance to disinfectants and cleaning agents, and supports compliance with hygienic requirements for food production.
LPG Delivery Hose is for residential and commercial delivery/transfer of liquid propane gas, LPG Dispensing and LPG Portable Heaters. Excellent cold weather flexibility, a smooth cover for low drag resistance, and a low extraction tube to reduce contamination. The hose meets UL, CGA and DOT requirements. LPG Delivery Hose is designed to transfer LP Gas from bulk storage to tank cars or cylinders. It is lightweight and flexible hose. All sizes have a flexible static wire and this hose meets all UL requirements. A CR cover that is oil resistant and also resists snagging, abrasion and weather.
Residential cartridge pdf document aqua middle east fzcAdolfsmith69
Aqua is the Biggest Industrial Group swimming pool equipments in Middle East Dubai. we Deal swimming pool equipment and supplies swimming pool equipment and accessories in dubai.
This document describes various types of tubing made from elastomers or soft rubber materials. It provides information on CR or chloroprene rubber tubing for laboratory and gas applications. Details are given on properties, specifications and pricing for different sizes of CR tubing. Additionally, orange-red colored CR gas tubing for gas burners is described along with gas tubing with end sleeves of varying lengths and prices. Finally, black EPDM or ethylene propylene diene monomer profile tubing for use as heat exchangers is mentioned.
Klüberfood NH1 64-422 is a synthetic grease developed for use in food processing equipment. It provides good wear protection, sealing protection to prevent moisture ingress, and supports hygienic requirements. The grease is NSF H-1 registered, making it suitable for incidental food contact. It can be applied by standard grease equipment to lubricate bearings and machines used in food production, such as grain and feed manufacturing, and helps enable a safe production process in accordance with regulations.
RENOLIT RED RUBBER GREASE is a specialty grease manufactured from vegetable oils thickened with a non-soap thickener and dyed red for identification. It retains its consistency at high temperatures and does not change under working conditions or temperature fluctuations. The grease is designed for use in automotive brake assemblies and other rubber and hydraulic components where it provides good mechanical stability, compatibility with natural and synthetic rubbers, and resistance to hydrocarbons and chemicals.
Araldite® FST 40004 / 40005 is an innovative thermoset resin designed for liquid composite molding processes like RTM, infusion, and pultrusion. It enables efficient production of structural carbon and glass composite parts for railway applications. The resin meets fire safety standards for railway and offers high modulus, fast curing times, and maximized weight savings for composite parts.
Elastostar Rubber Corporation manufacture Platinum Cured Silicone Tubing with a wide verity of extruded high-quality standard and all custom size silicone tubing, available in English and metric.
Synthesis and characterisation of pvc pipeBADAL PANCHAL
This document summarizes a student project to modify the formulation of PVC pipes to reduce noise produced when water flows through them. The students visited a pipe manufacturing plant to obtain raw materials for their modified recipe. Their formulation adds calcium carbonate filler and wax to the standard PVC pipe ingredients. They tested the reference pipe and will test their new formulation. The goal is to reduce noise by increasing density and decreasing friction between the water and pipe walls.
Eagle Contractors Water Hose - Water Hose Assembly with Bend Restrictor - Wat...JGB Enterprises, Inc.
Eagle Contractors Water Hose - Water Hose Assembly with Bend Restrictor.
JGB Enterprises Eagle Contractors Water Hose is traditional black rubber water hose assembly with bend restrictor reinforced with spiral polyester yarns and coupled with standard M x F Garden Hose Thread (GHT) solid brass fittings. It is available in 25, 50, 75, and 100 foot lengths.
5/8" and 3/4" ID
Push in Fittings - Legris Parker นิวเมติก.comDNTMb Inc.
The document provides information on various push-in fitting product lines from Parker Legris, including the LF 3000®, LF 3200, LIQUIfit®, LF 3600, LF 3800/3900, and LF 6100. It lists the fitting types, compatible fluid types and pressures, material options, thread and tube size ranges for each product line. Additional details are provided on the features, advantages, and applications of the LF 3000® push-in fittings, including their patented sealing technology, leak testing, range of configurations, vacuum performance, and conformance to industry standards.
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
ERIKS Hose Technology (EHT) provides a wide selection of hoses, ducting, and fittings made of various materials including metallic, PTFE, silicone, composite, plastic, and rubber. As a core competence center for ERIKS UK, EHT can supply custom assemblies and stock over £1 million worth of products to meet customer needs in industries such as pharmaceutical, petrochemical, food and beverage, and utilities. The document provides product details on various types of hoses and tubing including silicone, PVC, nylon, PU, neoprene, and rubber as well as ducting, fittings, and other accessories.
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
This document provides information on Huntsman Advanced Materials' insulation solutions for various applications in electrical engineering, including generators and motors, insulators and bushings, switchgears, and dry-type distribution transformers. It describes product lines such as Araldite and Aradur casting and impregnation systems, highlighting their key properties like thermal resistance, flame retardancy, mechanical strength, and chemical resistance. Tables provide details on specific product formulations, their characteristics and recommended manufacturing processes. The document aims to demonstrate Huntsman's expertise and solutions for meeting stringent electrical engineering insulation requirements.
Araldite® FST 40002 / 40003 is an epoxy resin designed for producing interior composite parts for aerospace applications. It has unique properties including high mechanical performance, fire resistance, and compatibility with resin transfer molding, infusion, and pultrusion processes. These properties allow for the efficient production of structural carbon and glass composite parts with maximum weight savings.
This document discusses various types of food grade hoses and pipes. It provides information on hoses of different lengths from 5m to 10m that are suitable for use in caravans, motorhomes, and boats. It also discusses longer coils of suction and discharge hoses for use in food manufacturing. The hoses and pipes discussed comply with European directives for materials that contact food and are resistant to chemicals commonly found in food processing.
This document summarizes the specifications of an Avalanche 2000 II snowmaking hose produced by JGB Enterprises. The hose features a black thermoplastic liner that reduces friction compared to conventional liners, as well as a woven polyester reinforcement and cover. It can operate down to -55 degrees Fahrenheit and is available in standard lengths of 50 and 100 feet, as well as custom lengths. It uses internally expanded aluminum or quick disconnect couplings. Pressure and burst ratings are provided for different inner diameters. Contact information and locations are listed for JGB Enterprises.
Function and Performance of Hydrocarbon Waxes in Rigid PVCTom Pedersen
The document discusses the function of hydrocarbon waxes in rigid PVC. It explains that waxes with carbon numbers of C30 to C36 work best as primary lubricants for PVC in North America. The lubricant system must be carefully adjusted to match the specific processing equipment used by each PVC manufacturer. Getting the lubrication right is crucial but complex, requiring in-depth technical support from wax suppliers.
STABUTHERM GH 461 and 462 are high-temperature greases used for lubricating rolling bearings up to 180°C and in centralized lubrication systems up to 200°C. They provide benefits such as lower lubricant and waste disposal costs, reduced bearing costs, and trouble-free machine operation. The greases are mineral oil-based with a polyurea thickener, offer good wear protection and corrosion resistance, and can be pumped through common lubrication systems for applications such as rolling mills, continuous casting installations, and furnaces.
Klüberfood NH1 87-703 Hyg is a synthetic grease that contains an antimicrobial additive to protect against microbial degradation. It is suitable for lubricating valves, fittings, and low-speed bearings containing EPDM seals in food processing and pharmaceutical equipment. The grease extends service intervals, provides high resistance to disinfectants and cleaning agents, and supports compliance with hygienic requirements for food production.
LPG Delivery Hose is for residential and commercial delivery/transfer of liquid propane gas, LPG Dispensing and LPG Portable Heaters. Excellent cold weather flexibility, a smooth cover for low drag resistance, and a low extraction tube to reduce contamination. The hose meets UL, CGA and DOT requirements. LPG Delivery Hose is designed to transfer LP Gas from bulk storage to tank cars or cylinders. It is lightweight and flexible hose. All sizes have a flexible static wire and this hose meets all UL requirements. A CR cover that is oil resistant and also resists snagging, abrasion and weather.
Residential cartridge pdf document aqua middle east fzcAdolfsmith69
Aqua is the Biggest Industrial Group swimming pool equipments in Middle East Dubai. we Deal swimming pool equipment and supplies swimming pool equipment and accessories in dubai.
This document describes various types of tubing made from elastomers or soft rubber materials. It provides information on CR or chloroprene rubber tubing for laboratory and gas applications. Details are given on properties, specifications and pricing for different sizes of CR tubing. Additionally, orange-red colored CR gas tubing for gas burners is described along with gas tubing with end sleeves of varying lengths and prices. Finally, black EPDM or ethylene propylene diene monomer profile tubing for use as heat exchangers is mentioned.
Klüberfood NH1 64-422 is a synthetic grease developed for use in food processing equipment. It provides good wear protection, sealing protection to prevent moisture ingress, and supports hygienic requirements. The grease is NSF H-1 registered, making it suitable for incidental food contact. It can be applied by standard grease equipment to lubricate bearings and machines used in food production, such as grain and feed manufacturing, and helps enable a safe production process in accordance with regulations.
RENOLIT RED RUBBER GREASE is a specialty grease manufactured from vegetable oils thickened with a non-soap thickener and dyed red for identification. It retains its consistency at high temperatures and does not change under working conditions or temperature fluctuations. The grease is designed for use in automotive brake assemblies and other rubber and hydraulic components where it provides good mechanical stability, compatibility with natural and synthetic rubbers, and resistance to hydrocarbons and chemicals.
Araldite® FST 40004 / 40005 is an innovative thermoset resin designed for liquid composite molding processes like RTM, infusion, and pultrusion. It enables efficient production of structural carbon and glass composite parts for railway applications. The resin meets fire safety standards for railway and offers high modulus, fast curing times, and maximized weight savings for composite parts.
Elastostar Rubber Corporation manufacture Platinum Cured Silicone Tubing with a wide verity of extruded high-quality standard and all custom size silicone tubing, available in English and metric.
Synthesis and characterisation of pvc pipeBADAL PANCHAL
This document summarizes a student project to modify the formulation of PVC pipes to reduce noise produced when water flows through them. The students visited a pipe manufacturing plant to obtain raw materials for their modified recipe. Their formulation adds calcium carbonate filler and wax to the standard PVC pipe ingredients. They tested the reference pipe and will test their new formulation. The goal is to reduce noise by increasing density and decreasing friction between the water and pipe walls.
Eagle Contractors Water Hose - Water Hose Assembly with Bend Restrictor - Wat...JGB Enterprises, Inc.
Eagle Contractors Water Hose - Water Hose Assembly with Bend Restrictor.
JGB Enterprises Eagle Contractors Water Hose is traditional black rubber water hose assembly with bend restrictor reinforced with spiral polyester yarns and coupled with standard M x F Garden Hose Thread (GHT) solid brass fittings. It is available in 25, 50, 75, and 100 foot lengths.
5/8" and 3/4" ID
Push in Fittings - Legris Parker นิวเมติก.comDNTMb Inc.
The document provides information on various push-in fitting product lines from Parker Legris, including the LF 3000®, LF 3200, LIQUIfit®, LF 3600, LF 3800/3900, and LF 6100. It lists the fitting types, compatible fluid types and pressures, material options, thread and tube size ranges for each product line. Additional details are provided on the features, advantages, and applications of the LF 3000® push-in fittings, including their patented sealing technology, leak testing, range of configurations, vacuum performance, and conformance to industry standards.
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
ERIKS Hose Technology (EHT) provides a wide selection of hoses, ducting, and fittings made of various materials including metallic, PTFE, silicone, composite, plastic, and rubber. As a core competence center for ERIKS UK, EHT can supply custom assemblies and stock over £1 million worth of products to meet customer needs in industries such as pharmaceutical, petrochemical, food and beverage, and utilities. The document provides product details on various types of hoses and tubing including silicone, PVC, nylon, PU, neoprene, and rubber as well as ducting, fittings, and other accessories.
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
Designed for low to medium pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
1/4" to 1" ID
-40°F to 212°F (max 248° intermittent)
High Peak Pressure Hydraulic Hose with Improved Flexibility. SAE 100R15 hydraulic hose is only for use with petroleum-based hydraulic fluids. The hose has multiple spiral plies of heavy wire wrapped in alternating directions. A braid or ply of material may be used over or within the inner tube and/or over the wire reinforcement to bind the wire and rubber.
This hose is compatible with biodegradable hydraulic fluids like vegetable oil as well as mineral and glycol based hydraulic fluids. It consists of an inner tube of oil-resistant special synthetic rubber, 4 or 6 spiral plies of heavy wire wrapped in nating directions, and an oil, abrasion, and weather-resistant special rubber cover. A MSHA cover is available.
3/4" to 1-1/2" ID
-40°F to +248°F (+257 °F discontinuous)
Tubings and Pipes
Connectors
Cocks and Valves
Flowmeters
Pumps
Laboratory Plastics
Semi-Finished Products
Adhesives and Lubricants
Fastening Elements
Closure Elements
Gaskets
Separation Technology
Drive Technology
A heavy duty layflat hose designed irrigation or pumping sludge and liquid fertilizers, the chemical industry and refineries. Custom Manufactured JGB Frac hose assemblies utilizing Through-the-weave-technology without delamination issues. 660 feet is the standard length.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
Aluminum piping for compressed air is a new concept which is basically using Push In fittings to join aluminum pipe. It takes a very limited amount of time and no tools are required for the same. It can be used for pressures upto 17 bar and because of the fact that all fittings and pipes are made in aluminum there is a good durability of the system and the air system remains corrosion free and leakage free for years. Owing to the beautiful system design, it becomes very easy to re-open and again assemble the fittings from the pipe so mobility is increased and it becomes very easy to dismantle an entire pneumatic system and relocate it or modify it as per the user's requirements.
Pvc oxygen hose - oxygen and acetylene hoses for saleEsmaeelAlsafeen
Pvc oxygen hose - oxygen and acetylene hoses for sale
Construction:
Tube: PVC material
Reinforcement: 1ply or 2ply high tensile polyester braiding.
Cover: PVC,black,blue
Application: Being widely used in welding machine,architeture
and lacquer factory.
Characteristics:
high tensile polyester reinforced.
Work under high pressure 300psi.
Strong peeling adhesion between fibre and pvc.
light,flexible,non-kinking,non-twisting.
UV and ozone resistant,weather resistant..
Can be used for jackhammer hose.
Temperature: -10°C(-50°F) to 65°C(+150°F)
A lightweight flexible Chemical Transfer Hose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube. Consult chemical resistant chart. Not for steam service, can be open end steam cleaned.
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge HoseJGB Enterprises, Inc.
This document provides specifications for Green/Clear PVC Suction & Discharge Hose from JGB Enterprises. It lists various sizes of hoses with their dimensions, minimum bend radii, vacuum and pressure ratings, burst pressures, weights, and standard lengths. The hoses feature smooth inner and outer surfaces, an elliptical helix for strength and flexibility, and transparency for viewing material flow. They are suitable for uses like dewatering pumps, mining, water suction, agriculture, drainage, and irrigation between -10°F and 140°F.
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge HoseJGB Enterprises, Inc.
Green/Clear PVC Suction & Discharge Hose - Water Suction and Discharge Hose - Standard Duty Green/Clear PVC Suction Hose is a MSHA approved flame-resistant suction and discharge hose for use in mines, pumps, irrigation lines, drain lines, air seeders, agricultural liquid fertilizer, rock dusting, rental and construction dewatering, trash, and standard-duty water suction or de-watering. Smooth inner and outer surface. MSHA Approved. Water suction – standard duty hose.
Air Filters Catalog - Concept EngineersRajas Wadekar
Concept Engineers is an Indian manufacturer and exporter of industrial ventilation equipment established in 2000. It produces a wide range of products including fans, air handling units, air pollution control equipment, and industrial air filters. The company aims to provide high quality, reliable products and services at competitive prices. It serves clients in industries such as HVAC, petrochemicals, pharmaceuticals, food processing, and more. Concept Engineers has become a leading supplier of these products in India and has an expanding global export business.
OzLinc Industries Hose and Clamps Catalogueozlincau
This document provides specifications for various types of hoses including:
- Petrol and oil suction/delivery hoses for fuel and oil transport.
- Marine exhaust hoses for conveying exhaust fumes on vessels.
- Rubber water hoses for suction, delivery, and irrigation applications.
- Radiator hoses for transporting hot water and antifreeze in cooling systems.
- Multipurpose hoses for delivery of fuels, oils, air and other pressurized liquids.
Cartridge check valves (also called non-return valves) are designed for simple installation and offer outstanding performance
inside mating housing. They are valves which only allows water to flow in one direction and prevents backflow.
XHnotion cartridge check valves are not only for water, also for air now. Applications include faucets, showers, valves and
heating systems for residential or commercial installations, as well as pumps,
All the models are 100% tested during production for drip tight operation. Maximum temperature and pressure rating is for
most models 200F(90C)/230psi. The average cracking (opening) pressure of most valves is between 0.25and 0.33 of a psi.
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.
This document provides product information for Stauff's sanitary hangers and supports. It includes:
- An introduction to Stauff's hygienic support systems designed for clean environments like food and pharmaceutical plants.
- Technical specifications and dimensions for their slim-line hygienic hanger series, including material grades, temperature ratings, sizing ranges and ordering codes.
- Details on variations like rigid rod designs that have no exposed threads and optional silicone gaskets.
- An overview of the table of contents which lists additional hanger types, assemblies, and technical appendix information.
The document describes a dual tube coil heat exchanger called the DTC-8. It has a spiral wound design with a sturdy inner tube within an outer tube for maximum counterflow efficiency. This tube-in-tube design allows for high pressure/temperature capabilities on both sides, as well as full drainability and reliability. The heat exchanger is suitable for cooling or heating a variety of fluids, especially those at high temperatures and pressures or with multi-phase/multi-component compositions. It is made from corrosion-resistant materials like stainless steel, copper, and nickel alloys.
Similar to Dairy Delivery Hose and Dairy Hose Assemblies (20)
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...JGB Enterprises, Inc.
Sandblast hose specifically designed for use in all abrasive blast applications and suitable for all blasting media. Thunderblast® hose features a static conductive natural rubber tube with four ply high tensile steel wire reinforcement, and an abrasion resistant SBR cover. It is available in 200 ft. rolls or 50 assemblies coupled with quick disconnects or nozzle holder ends.
1/2", 3/4", and 1" ID
-22°F to +185°F
Square Hole Ring Welded Basket Strainer. The Steel NPT Wire Basket Strainer can be fixed to suction lines or non-return valves to filter any large particles that may cause pump damage.
Pressure Wash Hose and Gun Kit - Hose Accessories. Designed for use on pressure washer machines with working pressures up to 4000 psi and temperatures up to 300°F. Comes in 100 ft. lengths.
J-FLEX specialty, medium to high pressure hydraulic hose for snow making.
High Pressure SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire. Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
J-FLEX® 2M 2SN/SAE 100R2AT for medium to high pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
High Pressure Hydraulic Hose. SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire.
Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose - Hydraulic systems with high peak pressures and arduous operating conditions needing extremely high flexibility. Due to its extreme flexibility, XFlex is perfect for use in extraordinarily tight positions. Tube: Oil-resistant synthetic rubber.
SAE 100R4 hydraulic hose with one or more plies of woven or braided textile fibers and a spiral of body wire. It is used most often for return and suction lines in low pressure and vacuum applications.
This hose is for use in low pressure hydraulic systems to return the oil to tank for reuse. It is resistant to aromatic content less than 40%. Working pressures range from 56 to 300 PSI depending on ID size. It comes in lengths up to 200 feet.
3/4" to 3" ID
-40°F to 212°F
J-FLEX 2SN5K Exceeds 100R2AT hose was developed to withstand punishing conditions such as pulsating pressures, hose flexing, and temperature fluctuations with petroleum based hydraulic fluids. A MSHA accepted cover is available for this hose cover. This has extraordinary flexibility; excellent bend radii properties; superior performance under flex-impulse conditions; exceptional long life.
Eagle Water Jetting Hose – High Pressure Water Jetting Hose - Waterblast Hose - Stripping layers from hard surfaces, strip mining and washdown applications.
Red heavy duty lay flat water discharge hose for use with higher working pressures in agricultural, quarry, mining, industrial, and construction applications. It is reinforced with two spiral plies and longitudinal synthetic cords for strength, and comes with standard short shank aluminum, malleable, or brass couplings.
1.5" to 8" ID
EAGLE VAC Hose - Special Design Abrasive Suction Hose. Special hose for high performance suction equipment for transport of dry or wet media such as mud, sand or blasting media.
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose - Polyurethane Lined Hose for Abrasives Handling.
For abrasive material handling such as pellets, rocks, sands, chips, grains transfer; sand shot line, bark blow line, lawn/mulch/straw collection; industrial vacuum cleaning.
Eagle Tank® Truck 300 PSI Hose - a corrugated, oil resistant, petroleum suction & discharge hose designed for the transport off mineral oil products and fuel mixtures with up to 50% aromatic content.
2", 3", 4", 6" & 8" ID
-40°F to 180°F
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer HoseJGB Enterprises, Inc.
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose. The hose is constructed of a black oil and fuel-resistant rubber tube and reinforced with synthetic textile and a twin steel wire helix for heavy-duty suction of petroleum products at 150 psi. It is for use in bulk petroleum stations, tank trucks, and in-plant oil service. The cover is abrasion, ozone, weather, heat & oil resistant.
1-1/2" to 8" ID
This document provides information on the Eagle Honey Bee Hose from JGB Enterprises for pumping, rental, construction dewatering, trash pumps, septic and wastewater handling applications. It lists specifications for polyethylene tube and rib reinforced hoses in 2-inch and 3-inch diameters with temperature ranges from -40°F to 150°F. Features highlighted include superior flexibility, remaining flexible in sub-zero temperatures, being crush resistant and easy to slide, and having leak proof cuffed ends.
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose. Specially designed for use in portable, work-over and seismograph drilling rigs, this hose is reinforced with 4 or 6 spiral wires and has a cover that is abrasion, ozone, hydrocarbon and flame resistant. The tube is oil resistant synthetic rubber. It can withstand temperatures up to 200° F (+93° C) in constant operation.
1" to 3" ID
-40°F to 200°F
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum HoseJGB Enterprises, Inc.
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose designed for anti-static tank truck vapor recovery.
Features:
Biofuel Compatible - Revolutionary polyurethane compound! Specially designed to handle gasoline, ethanol (Meeting ASTM D5798, D4806 or D6751 criteria.), diesel and biodiesel (Meeting ASTM D5798, D4806 or D6751 criteria.) vapors... and still keeps all the other great features and benefits!
Non-permeable polyurethane construction -won’t swell or become stiff like conventional TPR/rubber hoses.
Long life reduces operating costs.
Lightweight - much lighter than conventional TPR/rubber hoses.
Superior flexibility - especially in sub-zero weather!
“See-through” construction - for visual confirmation if fuel backs up into the vapor recovery system.
Grounding Wire - Durable multi-strand copper wire dissipates static electricity. Physically extract wire from the rigid helix and bond to the metal coupling (or by other means) to ground.
Easy Slide Helix - Rigid counter clockwise helix design protects hose tube from cover wear; allows hose to slide easily over rough surfaces
This hose is a water suction and discharge hose made of natural and synthetic rubber for use in medium to heavy-duty industrial and construction applications.
2" to 12" ID
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge HoseJGB Enterprises, Inc.
JGB Private Brand - Eagle Orange/Clear Suction and Discharge Hose - This suction and discharge hose is constructed of flexible PVC and a rigid PVC helix with synthetic braiding. It is easy to drag, lightweight and flexible, and perfect for fish suctioning or rental/construction pumping. Banding coils for this hose are also available.
1-1/2" to 10" ID
-13°F to 140°F
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Authentically Social by Corey Perlman - EO Puerto Rico
Dairy Delivery Hose and Dairy Hose Assemblies
1. DAIRY DELIVERY HOSE
www.jgbhose.com
JGB Headquarters
115 Metropolitan Drive
Liverpool, NY 13088
(315) 451-2770
Buffalo Branch
2540 Walden Ave.
Cheektowaga, NY 14225
(716) 684-8224
Southeast Regional Hub
1407 Westinghouse Blvd.
Charlotte, NC 28273
(704) 588-9920
St. Louis Branch
9707 Green Park Industrial Dr.
St. Louis, MO 63123
(314) 487-3144
Willliston Branch
520 Bean Dr.
Williston, ND 58801
(701) 570-2945
Houston Branch
619 E. Sam Houston Pkwy.
Suite 200
Pasadena, TX 77503
(281) 930-7777
Your Dairy Grade Hose Connection
®
2. Plicord ExtremeFlex Beverage Hose
Contitech 3-A Series Hoses
For beer, wine, distillery and beverage (edible liquid) transfer processing facilities. Ideal for applications requiring flexible and/or
tight bend connections.
Tube: White Chlorobutyl (FDA/USDA compliant & conforms to a 3-A Sanitary Standard 18-03)
Reinforcement: Spiral-plied fabrics wih double galvanized helix wire
Cover: Corrugated grey chemical (wrapped impression)
Temperature: -30˚F to 220˚F (-34˚C to 104˚C)
Order Codes: 549-603 Gray Cover
549-004 Red Microban Cover
Part#
ID Nom. OD Max. WP Bend Radius
Vacuum
HG@72°F
Weight
in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m
20762678 1 25.4 1.56 39.7 250 1.72 1.5 38 29 737 0.73 1.09
20762679 1-1/2 38.1 2.02 51.3 250 1.72 2.3 57 29 737 0.92 1.38
20762751 2 50.8 2.53 64.2 250 1.72 3.0 76 29 737 1.20 1.79
20762752 3 76.2 3.59 91.2 200 1.38 4.5 114 29 737 2.02 3.01
20762753 4 101.6 4.60 116.8 150 1.03 6.0 152 29 737 2.76 4.11
3. Plicord ExtremeFlex Beverage Red w/EZ Clean Cover Hose
Contitech 3-A Series Hoses
For beer, wine, distillery and beverage (edible liquid) transfer processing facilities. Ideal for applications requiring flexible and/or
tight bend connections.
Tube: White Chlorobutyl (FDA/USDA compliant & conforms to a 3-A Sanitary Standard 18-03)
Reinforcement: Spiral-plied fabrics wih double galvanized helix wire
Cover: Corrugated grey chemical (wrapped impression), new corrugated red EZ Clean UHMWPE cover
(semi-smooth finish)
Packaging: 100’ length, coiled, polywrapped
Temperature: -30˚F to 220˚F (-34˚C to 104˚C)
Order Codes: 549-605 EZ Clean Red Cover
Part#
ID Nom. OD Max. WP Bend Radius
Vacuum
HG@72°F
Weight
in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m
20776605 1 25.4 1.52 38.7 250 1.72 2 51 29 737 0.65 0.96
20762754 1-1/2 38.1 2.03 51.6 250 1.72 3 76 29 737 0.93 1.38
20752524 2 50.8 2.537 64.5 250 1.72 4 102 29 737 1.21 1.80
20762758 3 76.2 3.601 91.5 200 1.38 6 152 29 737 2.03 3.02
20762760 4 101.6 4.607 117 150 1.03 8 203 29 737 2.77 4.12
4. Contitech 3-A Series Hoses
Plicord ExtremeFlex Food Hose
Tube: White Chemivic™ synthetic rubber (FDA/USDA compliant and conforms to 3-A Sanitary Standard
18-03)
Reinforcement: Spiral-plied synthetic fabric with galvanized wire helix
Cover: White or gray Chemivic™ corrugated synthetic rubber (wrapped impression)
Packaging: 1/4”-5/8” – 300’ Bagel Pack, one piece
3/4” and 1” – 200’ Bagel Pack, one piece
Temperature: -25°F to 212˚F (- 32˚C to 100˚C)
Branding: Continental ContiTech Plicord® ExtremeFlex™ Food Grade 150 psi WP
Non-Stock/Sizes: 400’ minimum order
Order Codes: 549-462 (white)
549-164 (gray)
SAP# SAP# ID Nom. OD Max. WP Bend Radius Vacuum HG Weight
White Gray in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m
20478040 20483718 2 51.2 2.4 62.0 150 1.03 2 51 29 737 1.00 1.48
20478043 20483781 3 76.1 3.5 89.9 150 1.03 3 76 29 737 1.89 2.79
20478044 20483782 4 102.1 4.6 116.6 150 1.03 4 102 29 737 2.69 3.98
A high-tech, flexible corrugated hose with pretzel-like agility and proven performance. Best of all, it is available at a non-corrugated
price, making it a great value. With ExtremeFlex™, there’s even more to appreciate:
• Flexible Handling: Easier to move in and out of tight spaces and around sharp corners.
• Lightweight: Easier to lift and carry, so there are fewer workplace injuries.
• Lower Force to Bend: Easier to connect and disconnect, keeping productivity high.
5. Contitech 3-A Series Hoses
Plicord Brewline Hose
Tube: White chlorobutyl rubber (FDA/USDA compliant and conforms to 3-A Sanitary Standard 18-03)
Reinforcement: Spiral-plied synthetic fabric, 4 plies to 1-1/2” ID; 6 plies over 1-1/2” ID
Cover: Red EPDM with a white spiral stripe (wrapped impression)
Packaging: 100’ length, coiled, polywrapped
Temperature: -40˚F to 220˚F (-40˚C to 104˚C)
Branding: Example: Continental ContiTech Plicord® Brewline® hose 250 psi; FDA, 3-A and USDA
Order Codes: 549-885 Red Cover
549-003 Microban with Red Cover
A quality discharge hose designed specifically for the highly demanding service of transferring non-oily liquid products in wineries
and breweries.
SAP# ID Nom. OD Max. WP Weight
Red in. mm in. mm psi MPa lb./ft. kg/m
20020324 3/4 19.1 1.34 34.0 250 1.72 0.54 0.80
20020327 1 25.4 1.69 42.9 250 1.72 0.81 1.21
20032192 1e 31.8 2.00 50.8 250 1.72 1.05 1.56
20020335 1f 38.1 2.23 56.6 250 1.72 1.19 1.77
20020341 2 50.8 2.88 73.2 250 1.72 1.86 2.77
20020345 2f 63.5 3.51 89.2 250 1.72 2.66 3.96
20020348 3 76.2 4.09 103.9 250 1.72 3.57 5.31
20020352 4 101.6 5.31 134.9 250 1.72 5.43 8.08
6. Contitech 3-A Series Hoses
Plicord Wineline Hose
A quality, non-toxic hose for handling wine, potable water, and other non-oily liquid food products where the hose must meet
FDA requirements. For discharge service and suction service up to 20” hg vacuum at ambient temperature.
Tube: White chlorobutyl rubber (FDA/USDA compliant and conforms to 3-A Sanitary Standard 18-03)
Reinforcement: Spiral-plied synthetic fabric, 4 plies to 1-1/2” ID; 6 plies over 1-1/2” ID
Cover: White EPDM rubber with a purple spiral stripe (wrapped impression)
Packaging: 1/4”-5/8” – 300’ Bagel Pack, one piece
3/4” and 1” – 200’ Bagel Pack, one piece
Temperature: -40˚F to 220˚F (-40˚C to 104˚C)
Branding: Example: Continental ContiTech Plicord® Wineline® hose 250 psi; FDA, 3-A, and USDA
SAP# ID Nom. OD Max. WP Weight
White in. mm in. mm psi MPa lb./ft. kg/m
20020367 3/4 19.1 1.39 35.3 250 1.72 0.60 0.89
20020371 1 25.4 1.69 42.9 250 1.72 0.80 1.19
20099578 1-1/4 31.8 2.00 50.8 250 1.72 1.04 1.55
20020376 1-1/2 38.1 2.23 56.6 250 1.72 1.20 1.79
20020379 2 50.8 2.92 74.2 250 1.72 1.98 2.95
20020380 2-1/2 63.5 3.50 88.9 250 1.72 2.65 3.94
20020382 3 76.2 4.09 103.9 250 1.72 3.55 5.28
20031599 4 101.6 5.30 134.6 250 1.72 5.40 8.04
7. Plicord Vintner Hose
Contitech 3-A Series Hoses
For handling in-plant and/or tank truck transfer of wine, beer, potable water and other non-oily, liquid foodstuffs.
Tube: White chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary Standard 18-03)
Reinforcement: Spiral-plied synthetic fabric with Monofilament Helix
Cover: Gray EPDM synthetic rubber (wrapped) / purple branding tape
Packaging: 100’ length, coiled, polywrapped
Temperature: -30°F to 220°F (- 34°C to 104°C)
Branding: Example: Continental ContiTech Plicord® Vintner™ 250 psi; FDA, 3-A, and USDA
Order Codes: 549-886 White Cover
549-009 Red Microban Cover
SAP# ID Nom. OD Max. WP Bend Radius
Vacuum
HG@72°F
Weight
Gray in. mm in. mm psi MPa in. mm in. mm lb./ft. kg/m
20020354 1 25.4 1.62 41.1 250 1.72 3 76 27 686 0.71 1.06
20020356 1-1/2 38.1 2.11 53.6 250 1.72 4 102 27 686 0.98 1.46
20020361 2 50.8 2.68 68.1 250 1.72 7 178 27 686 1.38 2.05
20020362 2-1/2 63.5 3.21 81.5 250 1.72 10 254 27 686 1.78 2.65
20020365 3 76.2 3.85 97.8 250 1.72 12 305 27 686 2.59 3.86
8. Pliovic FG Hose
A versatile, lightweight, reinforced tubing for the food and beverage, general air, multipurpose, pharmaceutical and cosmetics
industries; computer component manufacturers; textile mills; and air-actuated equipment.
Tube: Clear Pliovic® compound, conforms to FDA, USDA, NSF-61 and 3-A standards
Reinforcement: Spiral synthetic yarn
Cover: Clear Pliovic® compound, conforms to FDA, USDA, NSF-61 and 3-A standards
Packaging: 1/4”-5/8” – 300’ Bagel Pack, one piece
3/4” and 1” – 200’ Bagel Pack, one piece
Temperature
Range:
-10˚F to 158˚F (-23˚C to 70˚C)
Branding: Example: Continental ContiTech Pliovic® FG FDA & 3-A Compliant 3/8” ID (9.5mm) 250 psi WP (1.7
MPa). Made in U.S.A.
Non-Stock/
Sizes:
Contact customer service for availability on cut, coiled and tied hose lengths.
SAP# ID Nom. OD Max. WP Weight
Clear in. mm in. mm psi MPa lb./ft. kg/m
20129509 1/4 6.4 0.44 11.2 250 1.72 0.05 0.07
20129600 5/16 7.9 0.50 12.7 250 1.72 0.07 0.10
20129601 3/8 9.5 0.59 15.0 250 1.72 0.08 0.12
20129602 1/2 12.7 0.75 19.1 200 1.38 0.12 0.18
20129603 5/8 15.9 0.87 22.1 200 1.38 0.15 0.22
20337878 3/4 19.1 1.02 25.9 150 1.03 0.19 0.28
20316305 1 25.4 1.34 34.0 125 0.86 0.31 0.46
20463346 1e 31.75 1.72 43.6 125 0.86 0.60 0.89
20463340 1f 38.1 1.98 50.2 125 0.86 0.72 1.07
Contitech 3-A Series Hoses
9. Gates 3-A Series Hoses
Food Master™ Xtreme™ 250SD CR Hose
Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is
also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required.
Tube: Type S (Sanitron™). White.
Reinforcement: Synthetic, high tensile textile with static conductive filament; resilient monofilament helix providing crush and
kink resistance.
Cover: Type P (EPDM). White or gray with burgundy spiral stripe.
Design Factor: 4:1
Packaging: 100' coiled and wrapped in polyethylene.
Temperature: -40°F to +230°F (-40°C to +110°C) continuous service.
Branding: Continuous transfer label. Example: “Gates® Food Master™ Xtreme™ 250SD CR Meets FDA, 3A and
USDA 250 PSI WP (1.72MPa) Made in U.S.A.”
Standards: Meets FDA requirements, 3A-Class 3 and USDA.
Color
ID OD Max WP Vac MBR Wt./Ft Length
Item #
in mm in mm psi bar in/Hg in lbs ft
Gray 3/4 19.1 1.22 31.0 250 17.2 30.0 2.0 .42 100 CPEB-012
Gray 1 25.4 1.48 37.6 250 17.2 30.0 3.0 .52 100 CPEB-016
Gray 1-1/2 38.1 2.07 52.6 250 17.2 30.0 4.5 .90 100 CPEB-024
Gray 1-1/2 38.1 2.07 52.6 250 17.2 30.0 4.5 .90 200 CPEB-024
Gray 2 50.8 2.62 66.5 250 17.2 30.0 6.0 1.21 100 CPEB-032
Gray 2-1/2 63.5 3.25 82.6 250 17.2 30.0 12.0 1.82 100 CPEB-040
Gray 2-1/2 63.5 3.25 82.6 250 17.2 30.0 12.0 1.81 200 CPEB-040
Gray 3 76.2 3.86 98.0 250 17.2 30.0 18.0 2.46 100 CPEB-048
Gray 4 101.6 4.88 124.0 250 17.2 30.0 36.0 3.24 100 CPEB-064
White 3/4 19.1 1.22 31.0 250 17.2 30.0 2.0 .42 100 CPEB-012
White 1 25.4 1.48 37.6 250 17.2 30.0 3.0 .52 100 CPEB-016
White 1-1/2 38.1 2.07 52.6 250 17.2 30.0 4.5 .90 100 CPEB-024
White 2 50.8 2.62 66.5 250 17.2 30.0 6.0 1.19 100 CPEB-032
White 2-1/2 63.5 3.25 82.6 250 17.2 30.0 12.0 1.82 100 CPEC-040
White 3 76.2 3.86 98.0 250 17.2 30.0 18.0 2.47 100 CPEC-048
White 4 101.6 4.88 124.0 250 17.2 30.0 36.0 3.24 100 CPEC-064
10. Gates 3-A Series Hoses
Color
ID OD Max WP Vac MBR Wt./Ft Length
Item #
in mm in mm psi bar in/Hg in lbs ft
Gray 1-1/2 38.1 2.00 50.8 150 10.3 30.0 6.0 .65 100 GFMB-024
Gray 2 50.8 2.50 63.5 150 10.3 30.0 12.0 .96 100 GFMB-032
Gray 2-1/2 63.5 3.11 79.0 150 10.3 30.0 22.0 1.62 100 GFMB-040
Gray 3 76.2 3.75 95.3 150 10.3 30.0 20.0 2.13 100 GFMB-048
Gray 4 101.6 4.76 120.9 150 10.3 30.0 28.0 3.16 100 GFMB-064
Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water–based products requiring a FDA sanitary hose.
Tube: Type M (Sanitron™). White.
Reinforcement: Synthetic, high tensile textile with resilient monofilament helix providing crush and kink–resistance.
Cover: Type P (EPDM). Gray with burgundy stripe.
Design Factor: 4:1
Temperature: –40°F to +212°F (–40°C to +100°C) continuous service.
Standards: Meets FDA requirements, 3A–Class 3 and USDA.
Food Master® Beverage 150SD CR Hose
11. Gates 3-A Series Hoses
Color
ID OD Max WP Vac MBR Wt./Ft Length
Item #
in mm in mm psi bar in/Hg in lbs ft
White 1 25.4 1.48 37.6 250 17.2 30.0 3.0 .52 100 3132-0180
White 1-1/2 38.1 2.07 52.6 250 17.2 30.0 4.5 .97 100 3132-0181
White 2 50.8 2.62 66.5 250 17.2 30.0 6.0 1.32 100 3132-0182
White 2-1/2 63.5 3.25 82.6 250 17.2 30.0 12.0 1.60 100 3132-0186
White 3 76.2 3.86 98.0 250 17.2 30.0 18.0 2.20 100 3132-0183
White 4 101.6 4.88 124.0 250 17.2 30.0 36.0 2.75 100 3132-0184
Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water–based products requiring a FDA sanitary hose.
Tube: Type S (Sanitron™). White.
Reinforcement: Synthetic, high tensile textile with resilient monofilament helix providing crush and kink–resistance.
Cover: Type P (EPDM). White with burgundy stripe.
Design Factor: 4:1
Temperature: -40°F to +230°F (-40°C to +110°C) continuous service.
Standards: Meets FDA requirements, 3A–Class 3 and USDA.
Food Master® Beverage 250SD CR Hose
12. Gates 3-A Series Hoses
Food Master® Oils and Dairy 150SD Hose
Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is
also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required.
Color
ID OD Max WP Vac MBR Wt./Ft Length
Item #
in mm in mm psi bar in/Hg in lbs ft
White 3/4 19.1 1.29 32.8 150 10.3 30.0 2.0 .65 100 GFMOD-012
White 3/4 19.1 1.29 32.8 150 10.3 30.0 2.0 .64 200 GFMOD-012
White 1 25.4 1.54 39.1 150 10.3 30.0 3.0 .79 100 GFMOD-016
White 1-1/2 38.1 2.05 52.1 150 10.3 30.0 4.5 1.15 100 GFMOD-024
White 2 50.8 2.55 64.8 150 10.3 30.0 6.0 1.50 100 GFMOD-032
White 2-1/2 63.5 3.08 78.2 150 10.3 30.0 12.0 1.98 100 GFMOD-040
White 3 76.2 3.58 90.9 150 10.3 30.0 18.0 2.35 100 GFMOD-048
White 4 101.6 4.60 116.8 150 10.3 30.0 24.0 3.12 100 GFMOD-064
White 4 101.6 4.60 116.8 150 10.3 30.0 18.0 3.13 200 GFMOD-064
White 6 152.4 6.69 169.9 150 10.3 30.0 36.0 5.59 50 GFMOD-096
Tube: Type C2 (Modified Nitrile). Sanitary FDA and 3A–Class 3. White.
Reinforcement: Synthetic, high tensile textile with steel wire helix
Cover: Type C2 (Modified Nitrile). White corrugated with burgundy stripe.
Design Factor: 4:1
Packaging: 100' coiled and wrapped in polyethylene.
Temperature: -40°F to +230°F (-40°C to +110°C) continuous service.
Standards: Tube meets FDA requirements, 3A–Class 3 and USDA. Phthalate free.
13. Gates 3-A Series Hoses
Food Master-Flex® SD Clear Hose
Transfer of bulk food products via suction, pneumatic or gravity systems where sanitary hose is required.
Color
ID OD Max WP Vac MBR Wt./Ft Length
Item #
in mm in mm psi bar in/Hg in lbs ft
Clear 1 25.4 1.29 32.8 100 6.9 28.0 3.0 .30 100 GFMFSDC-016
Clear 1-1/4 31.8 1.56 39.6 90 6.2 28.0 4.0 .38 100 GFMFSDC-020
Clear 1-1/2 38.1 1.84 46.7 90 6.2 28.0 5.0 .48 100 GFMFSDC-024
Clear 2 50.8 2.39 60.7 70 4.8 28.0 6.0 .71 100 GFMFSDC-032
Clear 2-1/2 63.5 2.92 74.2 65 4.5 28.0 8.0 .97 100 GFMFSDC-040
Clear 3 76.2 3.46 87.9 60 4.1 28.0 9.0 1.27 100 GFMFSDC-048
Clear 4 101.6 4.56 115.8 50 3.4 28.0 12.0 2.00 100 GFMFSDC-064
Tube: Type G (PVC). Sanitary FDA. Clear. Smooth
Reinforcement: Rigid thermoplastic reinforcement. Clear
Cover: Type G (PVC). Sanitary FDA. Clear. Smooth
Design Factor: 3:1
Temperature: –10°F to +130°F (–23°C to +55°C) continuous service.
Standards: Meets FDA requirements, 3A–Class 3 and USDA.
14. 6300 Series Hose
Nitrile Food 150 Suction & Discharge Hose
Recommended for the food transfer application that demands both flexibility and ruggedness with a clean white FDA grade tube.
Meets FDA, USDA & 3A sanitary standards Authorized #1376. The food grade nitrile tube is odorless and tastelessfor those oily
transfer applications. Excellent for suction and discharge applications. This ultra smooth microbe resistant tube is built on special
stainless steel mandrels for cleanliness.
Tube: FDA white nitrile
Reinforcement: Multiple plies of polyester tire cord with helix wire
Cover: Grey PVC nitrile.
Length: 100ft.
Temperature
Range:
-40°F (-40°C) to +210°F (+99°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Part No. I.D. O.D. Plies
WP
MBR
WT
psi LBS/FT
N6300-00750-012 ¾ 1.29 2 150 4 0.4
N6300-01000-016 1 1.54 2 150 5 0.5
N6300-01500-024 1½ 2.05 2 150 6 0.71
N6300-02000-032 2 2.55 2 150 7 0.95
N6300-03000-048 3 3.76 2 150 9 1.51
N6300-04000-064 4 4.76 2 150 12 1.98
Novaflex 3-A Series HosesNovaflex 3-A Series Hoses
15. 6301 Series Hose
Nitrile Food Discharge Hose
Recommended for the food transfer application that demands both flexibility and ruggedness with a clean white FDA grade tube.
Meets FDA, USDA & 3A sanitary standards Authorized #1376. The food grade nitrile tube is odorless and tasteless for those
oily transfer applications. Excellent for discharge applications. This ultra smooth microbe resistant tube is built on special stainless
steel mandrels for cleanliness.
Part No. I.D. O.D. Plies
WP
MBR
WT
psi LBS/FT
N6301-00500-008 ½ .99 2 250 n/a 0.31
N6301-00750-012 ¾ 1.24 2 250 n/a 0.41
N6301-01000-016 1 1.62 4 250 n/a 0.64
N6301-01500-024 1½ 2.12 4 250 n/a 0.93
N6301-02000-032 2 2.62 4 250 n/a 1.26
N6301-03000-048 3 3.64 4 250 n/a 1.64
N6301-03000-048 3 3.76 6 250 n/a 1.91
N6301-04000-064 4 4.64 4 250 n/a 2.19
N6301-04000-064 4 4.76 6 250 n/a 2.53
Tube: FDA white nitrile
Reinforcement: Multiple plies of polyester tire cord with helix wire
Cover: Grey PVC nitrile.
Length: 100ft.
Temperature
Range:
-40°F (-40°C) to +210°F (+99°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Novaflex 3-A Series Hoses
16. This food transfer hose is designed to provide maximum flexibility along with an abra ive resistant cover. Excellent for the ransfer
of oily product in full suction and discharge applications. Meets FDA, USDA & 3A sanitary standards Authorized #1376. This
ultra smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness.
Tube: FDA white nitrile
Reinforcement: Multiple plies of polyester tire cord with helix
Cover: Grey PVC nitrile.
Length: 100ft.
Temperature
Range:
-40°F (-40°C) to +210°F (+99°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous
steam service
Part No. I.D. O.D. Plies
WP
MBR
WT
psi LBS/FT
N6303-01500-024 1½ 2.13 2 150 6 0.73
N6303-02000-032 2 2.63 2 150 7 0.98
N6303-03000-048 3 3.74 2 150 9 1.53
N6303-04000-064 4 4.75 2 150 12 1.99
6303 Series Hose
Corrugated Nitrile Food 150 Suction & Discharge Hose
Novaflex 3-A Series Hoses
17. The connoisseur line of food hose is designed to meet the food processing industries demanding applications. Connoisseur is
built in a variety of hose constructions utilizing a white chlorobutyl tube for non-oily applications that will not impart taste or
odor. Meets FDA, USDA, and 3-A Sanitary Standards Authorized (#1376). Resistant to CIP solutions. This ultra smooth microbe
resistant tube is built on special stainless steel mandrels for cleanliness.
Tube: FDA white nitrile
Reinforcement: Multiple plies of polyester tire cord with helix
Cover: Grey PVC nitrile.
Length: 100ft.
Temperature
Range:
-40°F (-40°C) to +210°F (+99°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous
steam service
Part No. I.D. O.D. Plies
Max WP
MBR
Vacuum
Rating
WT
psi LBS/FT
N6500-00750-012 ¾ 1.29 2 150 4 Full 0.4
N6500-01000-016 1 1.54 2 150 5 Full 0.5
N6500-01500-024 1½ 2.05 2 150 6 Full 0.71
N6500-02000-032 2 2.55 2 150 7 Full 0.95
N6500-02500-036 2½ 3.14 2 150 8 Full 1.19
N6500-03000-048 3 3.67 2 150 12 Full 1.51
N6500-04000-064 4 4.67 2 150 16 Full 1.98
6500 Series Hose
Connoisseurs Food & Beverage Suction and Discharge Hose
Novaflex 3-A Series Hoses
18. Same high quality hose as Novaflex 6500, designed to handle non-oily applications only. The multi-ply construction provides
excellent resistance to kinking. Meets the requirements of FDA, USDA & 3-A (cert#1376)
Tube: White chlorobutyl (microbe resistant (non oily applications)
Reinforcement: Multiple plies of polyester tire cord
Cover: Grey EPDM
Length: 100ft.
Temperature: -40°F (-40°C) to +240°F (+116°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service, can be open end
steam cleaned.
Part No. I.D. O.D. Plies
Max WP WT
psi LBS/FT
N6501-00500-008 ½ .99 2 250 0.31
N6501-07500-012 ¾ 1.24 2 250 0.41
N6501-01000-016 1 1.49 2 250 0.52
N6501-01000-016 1 1.62 4 250 0.64
N6501-01500-024 1½ 2.12 4 250 0.93
N6501-02000-032 2 2.62 4 250 1.26
N6501-03000-048 3 3.64 4 250 1.64
N6401-03000-048 3 3.76 6 250 1.91
N6401-04000-064 4 4.64 4 250 2.19
N6401-04000-064 4 4.76 6 250 2.53
6501 Series Hose
Connoisseurs Discharge Hose
Novaflex 3-A Series Hoses
19. Same high quality hose as Novaflex 6500, designed to handle non-oily applications only. The multi-ply construction provides
excellent resistance to kinking. Meets the requirements of FDA, USDA & 3-A (cert#1376)
Tube: White chlorobutyl (non oily applications)
Reinforcement: Multiple plies of polyester tire cord
Cover: Red EPDM
Length: 100ft.
Temperature: -40°F (-40°C) to +240°F (+116°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Part No. I.D. O.D. Plies
Max WP WT
psi LBS/FT
N6502-00750-012 ¾ 1.37 4 350 .59
N6502-01000-0016 1 1.70 4 350 .85
N6502-01500-024 1½ 2.25 4 350 1.25
N6502-02000-032 2 2.88 6 350 1.89
N6502-02500-040 2½ 3.51 6 350 2.70
N6502-03000-048 3 4.04 6 350 3.45
N6502-04000-064 4 5.31 6 350 5.40
6502 Series Hose
High Pressure, Superior Quality Brewery Discharge Hose
Novaflex 3-A Series Hoses
20. The same hose as Novaflex 6500 but with a corrugated cover. The special smooth chlorobutyl bacteria resistant tube is designed
for non-oily products and will not impart odor or taste. Meets FDA, USDA & 3-A.
Tube: White chlorobutyl (non oily applications)
Reinforcement: Multiple plies of polyester tire cord
Cover: Grey EPDM
Length: 100ft.
Temperature
Range:
-40°F (-40°C) to +240°F (+116°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Part No. I.D. MBR Plies
WP WT
psi LBS/FT
N6503-02000-032 2 7 2 150 0.95
N6503-02500-040 2½ 8 2 150 1.19
N6503-03000-048 3 9 2 150 1.51
N6503-04000-064 4 12 2 150 1.98
6503 Series Hose
Connoisseurs Food & Beverage Hose
Novaflex 3-A Series Hoses
21. Connoisseurs Wine Hose. Special kink and crush resistant rubber hose, designed utilizing a multi-ply construction with dual special
monofilament helix rods. The tube is for non-oily application. Designed to meet the demands of “cleaning in process”. This ultra
smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness.
Tube: White chlorobutyl (non oily applications)
Reinforcement: Multiple plies of tire cord and dual mono-filament helix
Cover: Purple EPDM
Length: 100ft.
Temperature: -40°F (-40°C) to +240°F (+116°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Part No. I.D. O.D.
MBR VAC
Plies
WP WT
(in) (HG) psi LBS/FT
N6505-00750-012 ¾ 1.41 3 Full 2 250 0.39
N6505-01000-016 1 1.64 4 Full 2 250 0.48
N6505-01500-024 1½ 2.14 5 Full 2 250 0.68
N6505-02000-032 2 2.77 7 Full 4 250 1.27
N6505-02500-040 2½ 3.29 13 Full 4 250 1.55
N6505-03000-048 3 3.79 16 Full 4 250 1.89
6505 Series Hose
Connoisseurs Wine Hose
Novaflex 3-A Series Hoses
22. Special kink and crush resistant suction & discharge hose, designed for those more demanding applications requiring a product
that meets 3-A (cert# 1376), FDA & USDA standards. Designed to meet the temperatures and chemical resistance associated
with “cleaning in place” systems. This ultra smooth microbe resistant tube is built for non-oily applications, on special stainless
steel mandrels for cleanliness.
Tube: White chlorobutyl (non oily applications)
Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix
Cover: Gray EPDM abrasion resistant
Length: 100ft.
Temperature: -40°F (-40°C) to +240°F (+116°C)
(Cleaning In Place to 248°F (+120°C) Not for continuous steam service.
Part No. I.D. O.D.
MBR VAC
Plies
WP WT
(in) (HG) psi LBS/FT
N6506-00750-012 ¾ 1.41 3.0 Full 2 250 0.33
N6506-01000-016 1 1.64 3.5 Full 2 250 0.44
N6506-01500-024 1½ 2.14 4.5 Full 2 250 0.63
N6506-02000-032 2 2.77 7.0 Full 4 250 1.21
N6506-02500-040 2½ 3.29 13.0 Full 4 250 1.52
N6506-03000-048 3 3.79 16.0 Full 4 250 1.84
6506 Series Hose
Connoisseurs Food & Beverage Hose
Novaflex 3-A Series Hoses
23. NovaBrew is a state of the art designed hose based on the specific requirements of the modern day brewery. NovaBrew has a
rugged but flexible construction with a super smooth white hose tube for non-oily applications, that is microbe resistant along
with a dark burgundy red cover that resists dirt scuffs and is easily cleaned. NovaBrew is built on stainless steel mandrels for
cleanliness and meets FDA USDA and 3-A (certificate #1376).
Tube: White chlorobutyl (non oily applications)
Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix rods
Cover: Dark burgundy EPDM
Length: 100ft.
Temperature: -40°F (-40°C) to +240°F (+116°C)
(Can be open end steam cleaned) CIP to 248°F (+120°C)
Part No. I.D. O.D.
WP
MBR
Vacuum WT
psi Hg LBS/FT
N6507-07500-012 ¾ 1.41 250 4 Full 0.33
N6507-01000-016 1 1.64 250 4 Full 0.48
N6507-01500-024 1½ 2.14 250 5 Full 0.65
N6507-02000-032 2 2.77 250 7 Full 1.26
N6507-02500-040 2½ 3.29 250 13 Full 1.54
6507NB Series Hose
NovaBrew
Novaflex 3-A Series Hoses
24. Sanitary Fittings, Adaptors, Valve, Clamps
JGB offers a large selection of FDA approved high-purity Sanitary Fittings, Adaptors, Vales, and
Clamps for Food, Dairy, Beverage, Biotech, Pharmaceutical, and all other Sanitary Process markets.
Our Sanitary Fittings, Adaptors, Valve, Clamps meet FDA and USDA standards.
Sanitary Fittings are available in 316 Stainless Steel, 304 Steel, Polypropylene, PVDF, Polyethylene
and many other sanitary materials.
These Sanitary Hose Fittings are available:
Bradford Sanitary Stems (Tri-Clamp)
• 316 Stainless Steel Sanitary Stems
• Meets FDA and USDA sanitary standards
• 1 inch to 4 inch
• Dixon sanitary crimp stems are only to be used
with Dixon stainless steel crimp ferrules
• Tri-Clamp®
• I-Line
• Sanitary Clamp
• Spray Balls
• Bevel Seat
• Butt Weld
• Butterfly Valves
• Sight Glass
Dixon Sanitary Hose Fittings
• Dixon Tri-Clamp
• Dixon I-Line M x F
• Dixon Bevel Seat with Acme Nut
Sanitary Butterfly Valve Adapter
• Holedall & Sanitary Fittings
• N3 - 316 Stainless Steel Seat ring: EPDM
• Convoluted and Jack-Chem Fittings
25. Sanitary Fittings, Adaptors, Valve, Clamps
Bradford Round with Nitrile Inserts and Coupler - B24RPHC
• Holedall & Sanitary Fittings
• Nitrile inserts maximum temperature: 230°
• Coupler thread options:
• Standard - 3/8 NPT / Special - all thread
• 3/8-16 (part #B24RPHC16-G***)
• 1/2-13 (part # B24RPHC13-G***)
PT Coupling White Nitrile Food Grade Gasket
• Holedall & Sanitary Fittings
• White Nitrile Food Grade Gasket - 1-1/2 Inch
• ProGrip™ Fittings - Sanitary Wine Fittings
• Made in the U.S.A.
Tri-Clamp - Stainless Steel - PT Coupling Tri-Clover Clamp
• Holedall & Sanitary Fittings
• ProGrip™ Fittings - SE Internal Expansion System
• Sanitary Tri-Clamp - Stainless Steel
• Made in the U.S.A.
Parker MSAN-S Mini Sanitary Fittings
• Holedall & Sanitary Fittings
• 316 Stainless Steel
• Crimp Fittings / Sanitary Fittings
26. Sanitary Fittings, Adaptors, Valve, Clamps
Parker FBS-S Female Bevel Seat Sanitary Fittings
• Holedall & Sanitary Fittings
• Crimp Fittings / Sanitary Fittings
• 316 Stainless Steel
Dixon Sanitary Clamps
• Holedall & Sanitary Fittings
• Crimp Fittings / Sanitary Fittings
• 316 Stainless Steel
Dixon Spring Check Valves
• Holedall & Sanitary Fittings
• Full Size Flowplate - Long Bushing
• 316 Stainless Steel
• This spring check valve is machined and polished
to 3A standards.
1032 Sanitary Pressure Gauges / 4½ inch Dial
• Sanitary Gauges
• Sanitary Pressure Gauges
• 300 series stainless steel
• Bradford™ gauges meet 3A Sanitary Standards
for Gauges for Milk and Milk Products, Number
74-00 (Authorization 640).
27. Sanitary Fittings, Adaptors, Valve, Clamps
3 piece Stainless Steel Sanitary Ball Valve / BV2CV-050BB-FPC
• Ball Valve Automation
• BV2CV-050BB-FPC
• Industrial Ball Valves with Actuation
• Bradford™ automated ½” encapsulated 2-way
ball valve buttweld ends spring
304 Sample Sanitary Valve
• Sample Valves
• 304 stainless steel
• Silicone O-ring and plunger to ensure a leak-
proof connection
• Surface finish polished to sanitary standards
• End connections available: clamp and NPT
Bradford B5102 Series Sanitary Butterfly Valve
The 5102 series is a patented clamp butterfly valve. This
clamp valve is an incredible 1-3/8” wide on all sizes. The
valve will fit into ¾” of line space. The grooved clamp hous-
ing connects directly to clamp style fittings. Easy assembly
by removing the wing nuts and using a hex key for the han-
dle to secure and seal the housing onto your lines.