The document provides technical specifications for the AquaCartis water purification system. It describes 4 models - AquaCartis 100, 200, 400, 600 - that vary in size, weight, and maximum treatment capacity ranging from 500 to 30,000 liters per hour. It also details the filtering media, Nanocar+, which is activated coconut carbon coated with silver using a cold plasma process, giving it a high surface area and adsorption rates. The Nanocar+ provides effective filtration of contaminants at the molecular level.

1. Technical specifications
TM
AquaCartis modules
Natural water filtering system manufacturer
Version 1.02
Description
AquaCartis : a purification filter with a strong ability to withstand contaminants,biological, bacteriological and viral, including accidental pollu-
tion. This is the perfect complement to UV shock treatments on waters heavily loaded with bacteria (rain water, well water, drilling ...).
Nominal treatment capacity: 500 liters / h to 30,000 l / h. Pressure: 4 bar.
Features
AquaCartis 100 AquaCartis 200 AquaCartis 400 AquaCartis 600
Height 242 mm 370 mm 370 mm 370 mm
Diameter 114.3 mm 204 mm 204 mm 204 mm
Weight 5 kg 10 kg 11 kg 12 kg
Connections 26/34 33/42 33/42 33/42
Filtering media qty 1 liter 2 liters 4 liters 6 liters
Treatment capacity ± 0.6 m3/h ± 1.6 m3/h ± 3.0 m3/h ± 4.2 m3/h
Fixation size 140mm x 55mm 250mm x 120 mm
Filter body Inox 304 L
Sealed Food contact Butyl
Bolting Inox 316 L / TBHC M8
Filtering container
Material : PET
Weight [g/m2] : 500 / 14.75 - DIN 53 854
Air permeability @ 196 Pa : 660 m3/m2/h - DIN 53 887
Pore size [μm] : 20 μm
Tensil strenght warp / weft [daN/lin.cm] / [daN/5cm] : > 140 / > 110 - DIN 53 857
Elongation at break warp / weft [%] : < 18 / < 25 - DIN 53 857
Strenght [μm] : 1500 - DIN 53 855
Treatment : Soft
AquaCartis Cartridge
Nanocar + Long lasting filtering media doped with silver BLUE sewing thread
The deposit of money as pure metal (N6) directed by intra-areal processing in a plasma environment cold (10,000 degrees Cel-
sius / Fahrenheit 18,032) on micro-pores of theinner and outer surfaces of coal-based activated coconut yields covalent type bonds (C /Ag) and a high
surface area silver . The coating produced is said to be "thin", with a controlled thickness in the pores of a few angstroms, on pellets of a
1mm diameter.
- High adsorbtion rates BET ± 1200 à ± 2000 m2/g - Detergent load at 1 mg/l par mg/g Nanocar+ : 195
- Homogeneous particule size
- Hardness and high density
- Very low mineral load
Physico-chemicals specifications
- Bulk density …………………………………………………………….. 0.45 - 0.55 gramme / cm3
- Humidity in the Packing ………………………………………………... 5 % maximum
- Ashes ……………………………………………………………….…………4 % maximum
- Adsorption CC14 …………………………………………………………… 60 % minimum
- Hardness ………………………………………………………... ……………… 98 % minimum
- pores diameter: (No treatment 1.131) After treatment ………………………… 1.295 (nm) ±0.007
- Pores volume : (No treatment 0.094) After treatment …………………………. 1.119 (cm³/g) ±0.010