Prism surface coatings pvt ltd is one of the largest Turnkey suppliers of Painting and Powder Coatings plants, lines and has installed over 500 coating lines/plants worldwide. We have also worked for various customers over 25 years across Europe, USA, Asia, Africa and The Middle East for a wide range of industries. We supply to a wide range of Industries such as Automotive Components, Aerospace, Elevators, Aluminum Extrusion & Architectural Components, Valves, Steel / Wood Furniture, Electric Control Panels, Transformer, HHP Engines, Construction Machinery, Wind Mills, Railways, Rail coach / Wagons, Scooter / Motor cycle components, tractors,water boilers,cookwares. Agricultural Machinery, Trucks, Bus Body ,Drums, Cellular Phones...etc
Prism recently has taken over OMT technologies which is a 50 year old German company to form prism group of companies.
Our turnkey plants includes equipment like Shot Blasting Systems,Robotic blasting systems ,Dip and Spray Chemical Pre-treatment plants, Powder Coating Booths and recovery Systems, Dry and Wet type Paint booths/ Spray Booths, Paint Sludge separation and removal Systems, Conveyors, Paint shop -Automation, Ovens,shower tester booths,Teflon coating lines ,enamel coating lines and Effluent Treatment Plants.
Prism Groups corporate presentation.Prism group has formed after Prism surface coatings acquires a 50 YEAR OLD GERMAN company called OMT technologies.Omt technologies was the one of the leading painting and powder coating plant supplier in Europe, South america and North america.Prism has supplied over 500 coating lines worldwide and is the only company with the largest number of references and industry specific experience.
This 1/2” NPT 2-stage system includes moisture and oil separators to ensure no debris enters your air tools or spray equipment. The first stage removes moisture and particulates down to 40 microns; features sight-glass and manual drain.
Prism Groups corporate presentation.Prism group has formed after Prism surface coatings acquires a 50 YEAR OLD GERMAN company called OMT technologies.Omt technologies was the one of the leading painting and powder coating plant supplier in Europe, South america and North america.Prism has supplied over 500 coating lines worldwide and is the only company with the largest number of references and industry specific experience.
This 1/2” NPT 2-stage system includes moisture and oil separators to ensure no debris enters your air tools or spray equipment. The first stage removes moisture and particulates down to 40 microns; features sight-glass and manual drain.
These bypass indicators form an integral part of an industrial process tank. A pipe is mounted on the side of the tank by means of two process connections. This ensures that the level in the tank corresponds exactly to the level in the pipe. A magnetized float within the pipe activates red/white magnetic rollers, providing a visual indication of fluid level within the tank. Level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Vasant Group was established in the year 1981. "Rohit Precision Technologies Pvt. Ltd." is one of the new unit of Vasant Group since 2013. Company has installed most advanced Aluminum extrusion plant with various modern handling equipments to produce best quality products.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
These bypass indicators form an integral part of an industrial process tank. A pipe is mounted on the side of the tank by means of two process connections. This ensures that the level in the tank corresponds exactly to the level in the pipe. A magnetized float within the pipe activates red/white magnetic rollers, providing a visual indication of fluid level within the tank. Level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Vasant Group was established in the year 1981. "Rohit Precision Technologies Pvt. Ltd." is one of the new unit of Vasant Group since 2013. Company has installed most advanced Aluminum extrusion plant with various modern handling equipments to produce best quality products.
PEC's MPT series high pressure Triplex Plunger Pumps. Generally used for Car Washer, Reverse Osmosis, Chemical Injection, Boilers Feed Service, Hydraulic Testing, Cleaning of heat exchangers, Boilers, Towers, Chemical Vassels and Shop Floors under high pressure.
Capacity UP TO 300 M3/hr.
Pressure UP TO 1000 Kg/Cm2.
(https://www.indiamart.com/ksvalves) Owing to immense industry experience and knowledge, we have emerged as a renowned manufacturer, exporter and supplier of an assorted range of Industrial Valves, Strainer and PRV & PRDSH Station. These products are manufactured at our high-tech manufacturing unit in compliance with international quality standards using optimum quality components and advanced technology. Further, these products are known for smooth performance, rigid construction, corrosion resistance and longer service life.
Solutions de manutention des poudres
Manutention des pulvérulents
Equipement de manutention
Manutention poudre
Manutention poudres
Manutention produit vrac
Manutention vracs
Process poudre
Technologies manutention poudre
Process industriels traitant des poudres
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
11. Europe
India
South East Asia & China
The Middle East
Eqypt & Turkey
North America & South America
170
140
80
70
25
15
Number of Installations in Various Geographical Regions
Number Of Installations
76. REAL TIME MONITORING AND MODIFICATION IN PID VALUES TO MAKE BOOTHS MORE
COMFORTABLE AND OVEN AT PROPER TEMPERATURE
77.
78.
79.
80. •Painting as per the bar
code values read from
Engines
•Uniform painting
which gives uniform
thickness all over the
engine
•Emergency controls to
pause and restart the
painting.
•Communication
through Profibus
•Paint reaches all
the points in the
engines
85. • The change of water in the spray booth must be carried
out only every 12 months maximum.
• The automatically extracted sludge has a very low
volume.
• By continuous mud extraction ,the booth water volume
will be reduced of 70%
• Spray booths maintenance coasts will be reduced of more than 90%
• Our plants are completely automatic and the operation is
very easy to operate.
• The size of the pit required is negligible while comparing
to the conventional type systems.
• The percentage of paint in the circulating water will be
maintained at a level of < 0.2% at any time.
121. HOLLOW CONE
FLAT JET
V - JET
NOZZLES AND ACCESSORIES
S P R A Y T U N N E L
------------------------
TUNNEL
MAINTENANCE DOOR
FILTER
TANK
VERTICAL PUMP
RISER
NOZZLE
CONVEYOR
SUPPORT
DRAIN
OVERFLOW
TO SPARY
FOR NOZZLES
CONN.
FOR NOZZLE
QUICK RELEASE COUPLINGS
END CLOSING
SPRAY PRETREATMENT
188. Blasting is a process in surface preparation
for cleaning metal objects free oil and rust
and leaves the surface ready for painting or
bonding.
Types of blasting
1.Centrifugal Blasting
2.Wheel type Blasting
189.
190. Our business associate CLEMCO INTERNATIONAL
GMBH is the European headquartered Clemco
Industries, the world's largest manufacturer of
air-powered blast equipment used to remove
Mill scale of rolled steel, De scale the forgings,
Clean sand castings, Deburring of Gear
components, remove coatings, to prepare the
surface for further Coating process
191. No Job too big, even for the
biggest jobs CLEMCO
designed a wide range of Bulk
Blasters. Customers can
choose between 1.500 and
10.000 Liter capacity, either
stationary or portable design.
On request we offer mobile
units Highway towable. The
additional choice on outlet
quantities makes any BIG
CLEM to fit your needs.
193. Abrasive Blast cleaning requires specially
designed protective clothing and an air-fed
respirator. CLEMCO´s Apollo helmets, blast
suits, filters and related equipment deliver the
highest level of protection you can buy.
Wearing CLEMCO Operator Safety Equipment
lets you concentrate on the job of abrasive
blasting. Inside your comfortable Apollo
helmet, you breathe clean, filtered air, while
the CLEMCO blast suit and gloves protect you
from rebounding abrasive.
194. Inner tube of wear-resistant rubber or super wear-resistant rubber
quality
Intermediate layers for higher pressures or high flexibility
Working pressure: 12 bar
195. Special Nozzles: Angle nozzles with single or multiple orifices Flange
mount nozzles fit quick coupling nozzles holders
Jacketing Materials: Aluminum, Urethane Rubber
Liner Materials: Silicon Carbide, Tungsten Carbide,
Boron Carbide.
196. The RMS 2000 is a consequent further development of the prior model
RMS-100. Offering highest operating comfort, minimized pressure loss,
quick reaction time as trouble free working, she sets new standards and
has highest reputation in the market within the pneumatic Control Valve.
With the following accessories you make the RMS 2000 a complete
package of highest reliable pneumatic or electro-pneumatic remote
control system
197. Metering and valve actuation are
separate functions
Accurately meter all common blast
media
Fail-to-Safe design stops media
flow instantly if air or electric
power is interrupted
Works with pneumatic or electric
remote controls
Installs in minutes on most blast
machines.
200. Abrasive Characteristics Comparison
Material Mesh
Size
Shape Density
lbs/ft3
Mohs Friability Init.
Cost
No. of
Cycles
Per use
Cost
Source Typical
Applications
Sil. Sand 6-270 100 5.0-6.0 high low 1 med. nat. Outdoor blast cleaning
Min. Slag 8-80 85-112 7.0-7.5 high med. 1 - 2 med. b-p Outdoor blast cleaning
Steel Grit 10-325 230 8.0 low high 200+ med. mfg. Removing heavy scale
Steel Shot 8-200 280 8.0 low high 200+ low mfg. Cleaning, peening
Al. Oxide 12-325 125 8.0-9.0+ med. high 6 - 8 med. mfg. Cleaning, finishing,
deburring, etching
Glass Bead 10-400 85-90 5.5 med. med. 8 - 10 low mfg. Cleaning, finishing
Plastic 12-80 45-60 3.0-4.0 low/med. high 8 - 10 med. mfg. Paint stripping,
deburring, cleaning
Wheat Starch 12-50 90 2.8-3.0 high high 1 high b-p Paint stripping,
cleaning
Corn Cob 8-40 35-45 2.0-4.5 med. low 4 - 5 low b-p Removing paint from
delicate surfaces
= Angular = Spherical nat = Natural b-p = By-product mfg. = Manufactured
201.
202. Screw Conveyor system for recovering and Loading onto the Bucket
Elevator or Vacuum Suction system.
203. Belt Conveyor system can be offered as an alternative for recovering
the grits/shots and Loading onto the Bucket Elevator or Vacuum
Suction system.
204. Scrapper floor system is a simple
mechanism to recover the
shots/grits inside the chamber.
Rugged steel vanes are suspended
on a pneumatically powered frame.
This pushes the media forward. As
the frame moves back, the vanes
ride up over the mounds of media,
and then falls back into position for
the forward push.
205. Conveying distance up to 10
meters
High efficiency of filter
cartridge
Noise level below 72dB @ 1
meter distance
206. A bucket elevator - for recovering
grits/shots for re-cycling.
Compact, easy to operate and maintain
automatic systems with wide
configurations offered
207. The suction unit is of strong construction with sturdy maintenance access
doors and contains the cyclone/filter section fitted with safety relief valve
and automatically sequenced reverse pulse cleaning system, an acoustic
lined motor compartment housing an el drive motor and vacuum pump
complete with exhaust silencer fitted with a vacuum gauge.
213. Scope of Supply: Pressurised Down Draft Dry
Booth
Dimension: 12 x 8 x 6 meters.
Component Painted: Dumper Bodies.
Year of Commissioning: 2010
214. Pressurised Down Draft Booth dimension of 20mX6mX6m was supplied
in the year 1999 to Al-Shirawi, Dubai to paint Mercedes Benz
Commercial vehicles
215. 1613 Tippers
3116 Truck
Scope of Supply: Down Draft Dry Booth
Dimension: 10 x 5 x 5 meters.
Component Painted: Cabs.
Year of Commissioning: 2003
216.
217. A Conveyorised line comprising of Robotic Flaming, 3 Pressurised Water Wash
Paint Booths, 3 Flash Off Zones, and Baking oven along with Temperature and
Humidity Controller was supplied to Plastic Omium Varroc Ltd, Pune for
painting automobile Bumpers- Supplied in the year 2009.
218. Pressurised Side Draft Water Wash Booth Installed
at M/S. India Japan Lighting Ltd, an OE supplier to
Maruti Suzuki Ltd and Telco for painting their
Headlights. This plant was supplied in the year 2004
219.
220. Scope of Supply: Shot Blasting Room & Down Draft Dry
Booth
Dimension: 15 x 8 x 9 meters.
Component Painted: Heat Exchanger, Pressure Vessels &
Turbines
Year of Commissioning: 2009
Steam Turbine
Pressure Vessel
221. Scope of Supply: Non-Pressurized Down Draft Dry Booth.
Booth Dimensions: 24m x 8m x 6m
Component Painted: Defence Equipments & Missile Launchers.
Year of Commissioning: June 2009
222. Non-Pressurised Down Draft Paint Booth
measuring 8mX6mX5m of 5 nos. was supplied to
M/S. Disa India Ltd, Bangalore between the year
2002-2009. Disa are manufacturers of Wheel
Blasting Machines
223.
224. Process Performance
Cast Iron Motors
Modular Induction Motors
Scope of Supply: Down Draft Dry Booth
Dimension: 7 x 5 x 5 meters.
Component Painted: Induction & Process Motors.
Year of Commissioning: 2009
225. Tobacco Processing Machine
Tobacco Processing Machine
Scope of Supply: Pressurised Down Draft Dry
Booth
Dimension: 10 x 5 x 5 meters.
Component Painted: Tobacco Processing Machine.
Year of Commissioning: 2008
226. Injection Moulding Machine
Injection Moulding Machine
Scope of Supply: Down Draft Dry Booth
Dimension: 10 x 6 x 5 meters.
Component Painted: Plastic Processing Machine.
Year of Commissioning: 2005
227.
228. Safety Equipments for Airbus
Lightings for Airbus & Boeing
Scope of Supply: Pressurised Cross Draft Dry
Booth
Dimension: 9 x 6 x 4 meters.
Component Painted: Lightings & Safety
Equipments.
Year of Commissioning: 2009
229. Scope of Supply: Pressurised Preparation Booth, Pressurised Side Draft Dry
Booth with Wet Scrubbing Unit and Drying Oven
Dimension: 9 x 5 x 5 meters.
Component Painted: Air Craft Equipments.
Year of Commissioning: 2012
230.
231. Scope of Supply: Pressurized Down Draft Water Wash
Booth & Oven
Booth Dimensions: 11m x 7m x 7m
Component Painted: Soil Compactors & Pneumatic Drills
Year of Commissioning- June 2006
232. Scope of Supply: Non-Pressurized Down Draft
Dry Booth
Booth Dimensions: 8mX6mX5m
Component Painted: Concrete Mixers & Batching
Plants
Year of Commissioning- June 2007
233. Scope of Supply: Pressurized Down Draft Dry
Booth with Wet ASU-2 Nos.
Booth Dimensions: 18mX7mX7m
Component Painted: Excavators
Year of Commissioning: June 2010
234. Scope of Supply: Non-Pressurized Down Draft
Dry Booth with Insulated Panels.
Booth Dimensions: 18mX9mX9m
Component Painted: Pneumatic Drills
Year of Commissioning- June 2008
235. Scope of Supply: Non-Pressurized Down Draft Dry
Booth.
Booth Dimensions: 10m x 5m x 5m
Component Painted: Backhoe Loaders.
Year of Commissioning: June 2009
236.
237. Scope of Supply: Non-Pressurised Down Draft Booth & Thermo Reactive Oven
Booth Dimensions: 14m x 5m x 5m
Component Painted: Railway wagon.
Year of Commissioning- 2011
238. Scope of Supply: Non-Pressurised Down Draft Booth & Thermo Reactive Oven
Booth Dimensions: 31m x 5m x 5m
Component Painted: Railway wagon.
Year of Commissioning- 2012
239. New Development in Oven Technology
“Flameless Gas Catalytic Radiation Oven”
241. • Long wave radiation.
• Flameless catalytic reaction.
• Temperature of 3700C generated at the catalytic
surface.
• Used LPG or Natural Gas.
• Pad consists of ceramic fiber blanket impregnated
with special catalyst, reaction promoters and
stabilizers.
242. How does it work ?
Oxidation
Gas + Oxygen + Catalyst Infra
Red energy + CO2 +
Water Vapor + traces of CO and Nitrogen Oxide
243.
244.
245.
246.
247.
248. Benefits
• Substantial fuel and energy(electricity) saving.
• Plant space saving.
• Fast curing of paint on components which have low thermal
stability (opens up whole area of new application).
• Quick heat up time for powder coated objects resulting in
better finish.
• Easy to design the oven with several benefits for large and
heavy components.
• Reduced WIP.
Limitations
• Test trials are required for designing the oven in the absence
of technical information.