This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed for tasks like removing bonded or peelable semi-conductor screens and trimming insulation without damaging cable cores.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
Boddingtons Electrical
Thorne & Derrick UK distribute a broad range of Boddington cable jointing and cable preparation tools for 11kV 33kV cables. Boddington tools are a very popular choice by LV and HV jointers for working upon and preparing cables prior to jointing or terminating.
Boddingtons Cable Preparation Tools
Boddingtons Electrical is a leading manufacturer and supplier of insulated tools and electrical safety products including:
Cable Knives (Hacking & Coring)
Cable Sheath & Insulation Removal Tools
Cable Sheath Cutters
Cable Sheath Cutting Pliers
Cable Sheath Stripping Pliers
Consac Sheath Cutting Tools
Stripping Tool for Bonded Semi-Con Screens
Stripping Tool for Peelable Semi-Con Screens
XLPE Insulation Removal Tools for High Voltage Cables
XLPE Insulation Stripping Tools for HV Triplex Cables
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
Boddingtons Electrical
Thorne & Derrick UK distribute a broad range of Boddington cable jointing and cable preparation tools for 11kV 33kV cables. Boddington tools are a very popular choice by LV and HV jointers for working upon and preparing cables prior to jointing or terminating.
Boddingtons Cable Preparation Tools
Boddingtons Electrical is a leading manufacturer and supplier of insulated tools and electrical safety products including:
Cable Knives (Hacking & Coring)
Cable Sheath & Insulation Removal Tools
Cable Sheath Cutters
Cable Sheath Cutting Pliers
Cable Sheath Stripping Pliers
Consac Sheath Cutting Tools
Stripping Tool for Bonded Semi-Con Screens
Stripping Tool for Peelable Semi-Con Screens
XLPE Insulation Removal Tools for High Voltage Cables
XLPE Insulation Stripping Tools for HV Triplex Cables
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
Cembre RHU231 Hydraulic Crimp Head
Cembre RHU231 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU231
Copper Lugs & Splices up to 630sqmm
Aluminium Lugs & Splices up to 500sqmm
LV-HV Cable Jointers Tools for 1000V, 11kV, 33kV Cable Preparation.
Low voltage cable jointing tools for cable stripping and cable preparation of DNO utility and industrial power cables including waveform, consac, XLPE and PILC. High voltage cable jointing tools enable the cable preparation, stripping, cutting and removal of insulation (XLPE, EPR), semi-conductive screens (bonded and peelable) and outer cable sheaths (PVC, PE, EPR) from single and multi-core 11-33kV cables, including Triplex cable. T&D also stock and distribute Cembre Cable Crimping & Cable Cutting Tools and SEB Cable Pulling and Laying Equipment including cable rollers, cable socks, drum jacks and conduit rods.
Cembre RHU231 Hydraulic Crimp Head
Cembre RHU231 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU231
Copper Lugs & Splices up to 630sqmm
Aluminium Lugs & Splices up to 500sqmm
LV-HV Cable Jointers Tools for 1000V, 11kV, 33kV Cable Preparation.
Low voltage cable jointing tools for cable stripping and cable preparation of DNO utility and industrial power cables including waveform, consac, XLPE and PILC. High voltage cable jointing tools enable the cable preparation, stripping, cutting and removal of insulation (XLPE, EPR), semi-conductive screens (bonded and peelable) and outer cable sheaths (PVC, PE, EPR) from single and multi-core 11-33kV cables, including Triplex cable. T&D also stock and distribute Cembre Cable Crimping & Cable Cutting Tools and SEB Cable Pulling and Laying Equipment including cable rollers, cable socks, drum jacks and conduit rods.
The Salisbury 40 cal/cm2 lt arc flash material makes working more comfortable then ever. Salisbury has made it even easier to do your job safely and comfortably. Salisbury offers an even lighter 40 cal/cm2 option with our LT line. The 40 cal/cm2 LT option is 10% lighter than the standard 40 cal/cm2 material making your job even more comfortable.
ll Salisbury PRO-WEAR® Arc FLash Protection Clothing has received the coveted CE certification. This Salisbury advantage is one more reason why Salisbury provides the best personal protective equipment available today. All Salisbury PRO-HOOD® Arc Flash Protection Hoods have also been CE certified. Look for the CE marking to see exactly which garments have been CE 0120 certified.
CE Marking is a mandatory conformity marking and refers to Product Safety. CE Marking on a product:
lIndicates that the product complies with the essential health and safety requirements of all applicable EU directives.
lA declaration by the manufacturer, or its representative, or the importer that those requirements have been met in full.
lA declaration that all conformity procedures have been completed. The product is allowed in the European market.
Cembre is today the leading Italian manufacturer and one of the largest European manufacturers of electrical compression connectors and related installation tooling.
T&D are Preferred Distributors for the Cembre range of cable crimping tools.
Cembre crimping tools are always the first choice of the electrical contractor and cable jointer for ease of use, reliability and versatility. This includes Cembre hydraulic, ratchet and battery crimping tools.
T&D distribute Cembre tools for LV-HV cable cutting of armoured (SWA), braided (SWB) and unarmoured cables with copper or aluminium conductors - this includes manual, ratchet and hydraulic cable cutters and cutting tools.
T&D are Main UK Stockists for the Cembre range of copper compression connectors (cable crimp lugs and splices) for low voltage cable crimping applications.
Cembre cable crimp lug ranges include : transformer cable lugs, single hole cable lugs, 2 hole cable lugs, narrow palm cable lugs, Ceetaps (C Taps) and reducer crimps. This includes copper, aluminium and bi-metallic Cembre crimp connectors to suit all cable termination, jointing and electrical applications.
T&D also offer competitive prices for Burndy, Mecatraction, Panduit, Thomas & Betts, Klauke and Prysmian (BICC BICON) ranges of cable lugs, splices, terminals and connectors.
Cembre Overview: Terminals, Connectors, Connector Sleeves, Copper Crimping Lugs, ATEX Cable Glands, Plugs, Mechanical Tools, Hydraulic Tools, Crimping Tools, Cable Cutters, Cable Clamps, High Voltage Copper Terminals, Cable Ties, Heatshrinkable Tubing.
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Due to their optimised micrometre-accurate precision grinding, FEATHER surgical scalpels offer outstanding quality and performance. The double-honing process ensures ultra-sharp cutting edges of superb durability. The standard surgical instrument portfolio includes; standard, mini and long scalpels, safety scalpels, a variety of surgical blades & handles and a blade plier & remover.
18V Slitting shear used for multiple industries for cold cutting on building sites and factories. The tool is designed primarily for the Ducting Trade.
DCT welding and jig tables are made for extreme duty metal fabrication. Built to last a lifetime and beyond, these tables are constructed with an extremely rigid and flat, five-sided top surface.
Learn more at www.enjoy-sound.com
The Norton Clipper range of hand-held petrol saws features an electronic carburettor which eliminates the hassle of a choke and makes a stress-free start of the powerful 4kW/5,4HP engine. 4 models are available, in 300 or 350 mm blade diameter, and using standard fuel + oil mix or fitted with the first ever iLube® automatic lubrication system, which controls the mix of oil and fuel electronically.
Reference documents on hand tools in the automotive industry help save assembly time and access new tool technologies, most of the tools are manufactured in high quality Europe
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
1. TOOLING COMPONENTS
Removes PVC, PE and EPR sheaths
Suitable for single-core or three core cables
Right or left handed
Removes bonded semi-conductor screen
To remove peelable semi-conductor screen
Removes insulation without damage to the core
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
2. TOOLING COMPONENTS
These pliers remove plastic, rubber, thin foil and soft metal sheaths
FEATURES:
Fixed cutting blade depth
Incorporates linear and axial cutting action with sheath removal end blades
Precision tool in light cast aluminium
Cutting blades run on smooth action bearing for ease of use
Spare blades available for all pliers
Sheath Stripping Pliers
Ref No. Description
8YR0-PG0FP Suitable for FP200
8YR0-PG0 5 - 17mm Dia
8YR0-PG1 8 - 21mm Dia
8YR0-PG2 21 - 35mm Dia
8YR0-PG3 26 - 52mm Dia
8YR0-PG4 45 - 75mm Dia
8YR0-PG5 65 - 95mm Dia
8YR0-PG6 80 - 125mm Dia
Used to cut plastic and elastometric insulation from high and medium
voltage single-core cables and low voltage three-core cable.
FEATURES:
Robust design
Locking blade depth
Handle detaches to aid storage
Spare blades available
Adjustable Insulation Stripping Tools
Ref No. Description
8YR0-LH1 14 - 40mm Dia
8YR0-LH2 38 - 60mm Dia
8YR0-LH3 60 - 80mm Dia
8YR0-LH4 80 - 100mm Dia
8YR0-LH5 100 - 140mm Dia
8YR0-BRMCD1 LH1 c/w depth guage 14 - 40 Dia
Used to catch the peelable semi-conductor
Screen Edge Lifter
Ref No.
8YR0-DSP
3. TOOLING COMPONENTS
This tool removes the peelable semi-conductor
FEATURES:
Robust design
Adjustable handle for comfort
Locking stop gauge for accurate lengths
Spare blades available
Adjustable Screen Scoring
Ref No. Description
8YR0-LHM1R 14 - 40mm Dia
8YR0-LHM2R 38 - 60mm Dia
This tool removes the bonded semi-conductor
FEATURES:
Robust design
Adjustable handle for comfort
Lockable blade depth
Spare blades available
Adjustable Screen Scoring
Ref No. Description
8YR0-ASC40R1 14 - 40mm Dia
8YR0-ASC40R2 38 - 60mm Dia
8YR0-LHS3 60 - 80mm Dia
8YR0-LHS4 80 - 110mm Dia
8YR0-LHS5 100 - 140mm Dia
FEATURES:
Small solid construction
Spare blades available
Fixed Blade Scoring Tool
Ref No. Description
TT2352-1 0.4mm (0.015”) depth
TT2352-2 0.6mm (0.025”) depth
TT2352-3 1.5mm (0.06”) depth
Used to spread the sheath to facilitate the passing of the shield connection
Sheath Spreaders
Ref No. Description
8YRO-EV50-95 50/95mm
2
8YRO-EV150-240 150/240mm
2
4. TOOLING COMPONENTS
Components Commercial Enquiries
Tel: +44 (0) 151 430 3655 Fax: +44 (0) 151 430 3636
Email: components.sales@prysmian.com
Prysmian Cables Limited
Components Unit, P.O. Box 4, Hall Lane
Prescot, Merseyside, L34 5UR, UK
www.prysmian.co.uk
strippingtools_uk/03/05
This tool allows cylinder and tapered stripping of high and very high
voltage single-core dry cables
FEATURES:
The insulation cutting angle is fully adjustable by means of a graduated rule
Supplied in wooden box
Insulation Chamfering Tool
Ref No. Description
8YR0-NO2 38 - 60mm Dia (LHC2)
8YR0-NO3 60 - 80mm Dia (LHC3)
8YR0-NO4 95 - 110mm Dia (LHC4)
8YR0-NO5 100 - 140mm Dia (LHC5)
This tool is used to reposition the cable shield ahead of ligature
connection
Outer Sheath Roller Pliers
Ref No. Description
8YR0-ALROCAN 11kV 50-240mm
This tool produces a taper,only on the insulation
Adjustable Tapering Tool
Ref No.
8YR0-LHA
This tool removes marks on the semi-conductor
Aluminium Scraper Tool
Ref No. Description
8YR0-SCRAPER Adjustable (Aluminium)
8YR0-SCRAPER-B Fixed (Phosphor Bronze)
This tool is rapid pumicing of the insulation
Portable Insulation Sanding Machine
Ref No. Description
8YR0-ALROC-C-PP240 240V
8YRO-ALROC-C-PP110 110V
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK