The Norton Clipper range of hand-held petrol saws features an electronic carburettor which eliminates the hassle of a choke and makes a stress-free start of the powerful 4kW/5,4HP engine. 4 models are available, in 300 or 350 mm blade diameter, and using standard fuel + oil mix or fitted with the first ever iLube® automatic lubrication system, which controls the mix of oil and fuel electronically.
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
OzLinc Industries High Pressure Fittings Catalogueozlincau
OzLinc Industries supply a variety of high pressure fittings, hose, clamps, valves and pipe to the Australian mining, fire fighting, infrastructure and marine industries.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
KEY BAR CHUCK WITH QUICK-ACTION JAW CHANGE SYSTEM
The RÖHM key bar chucks with quick-acting jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required. Thanks to the quick-acting jaw change system, the jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds.
Advantages
- Maximum clamping forces thanks to direct force transfer via the key bar system
- Maximum concentricity and axial run-out tolerance
- High user-friendliness thanks to quick-acting jaw change System
GEARED SCROLL CHUCKS
The RÖHM geared scroll chucks have proven themselves a thousand times over and have already been used successfully on lathes, rotary tables and dividing attachments for decades. The jaws can be adjusted over the entire clamping range in order to be able to very quickly clamp workpieces with a wide clamping diameter range without offsetting the jaws.
Adtantages
- Quick jaw adjustment over the entire clamping range
- Proven chuck with optimal price/performance ratio
- Protection of the machine spindle by means of splash-water edge
INDEPENDENT CHUCKS
Independent chucks from RÖHM are particularly successful and effective when force has top priority.
Due to the increased rigidity and optimal wear behavior, they are especially suitable for the Initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible.
Advantages
- Safe and easy clamping of irregular, regular, as well as round workpieces by four
independently adjustable jaws
- Easy rough centering by means of concentric rings on the chuck body
- Direct force transfer through radially arranged threaded spindles
http://eshop.roehm.biz/roehm_de_en/online-shop/drehfutter-planscheiben.html
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
OzLinc Industries High Pressure Fittings Catalogueozlincau
OzLinc Industries supply a variety of high pressure fittings, hose, clamps, valves and pipe to the Australian mining, fire fighting, infrastructure and marine industries.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
KEY BAR CHUCK WITH QUICK-ACTION JAW CHANGE SYSTEM
The RÖHM key bar chucks with quick-acting jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required. Thanks to the quick-acting jaw change system, the jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds.
Advantages
- Maximum clamping forces thanks to direct force transfer via the key bar system
- Maximum concentricity and axial run-out tolerance
- High user-friendliness thanks to quick-acting jaw change System
GEARED SCROLL CHUCKS
The RÖHM geared scroll chucks have proven themselves a thousand times over and have already been used successfully on lathes, rotary tables and dividing attachments for decades. The jaws can be adjusted over the entire clamping range in order to be able to very quickly clamp workpieces with a wide clamping diameter range without offsetting the jaws.
Adtantages
- Quick jaw adjustment over the entire clamping range
- Proven chuck with optimal price/performance ratio
- Protection of the machine spindle by means of splash-water edge
INDEPENDENT CHUCKS
Independent chucks from RÖHM are particularly successful and effective when force has top priority.
Due to the increased rigidity and optimal wear behavior, they are especially suitable for the Initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible.
Advantages
- Safe and easy clamping of irregular, regular, as well as round workpieces by four
independently adjustable jaws
- Easy rough centering by means of concentric rings on the chuck body
- Direct force transfer through radially arranged threaded spindles
http://eshop.roehm.biz/roehm_de_en/online-shop/drehfutter-planscheiben.html
Solutions de manutention des poudres
Manutention des pulvérulents
Equipement de manutention
Manutention poudre
Manutention poudres
Manutention produit vrac
Manutention vracs
Process poudre
Technologies manutention poudre
Process industriels traitant des poudres
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
Saint-Gobain Abrasives, under its Norton brand has launched a new range of high performance wheels for cutting-off and grinding primarily for use in oil & gas, off-shore, energy, transportation, foundry, shipyard and metal fabrication markets. The new range, Norton Quantum, gives faster and more aggressive cutting and grinding.
LIVE CENTRES
The requirement for high cutting capacities and high working precision demands an additional support
by a revolving live centre for many workpieces due to their shape and length. Thanks to their
precision bearings, RÖHM live centres offer optimal force absorption and a maximum concentricity
deviation of up to 0.003 mm. Thanks to the lifetime lubrication, the centre points are maintenancefree.
Advantages
- Maximum concentricity and optimal force absorption thanks to proven precision bearings
- Special lubrication for long service life and little required maintenance
- Minimum interference contour thanks to slender housing shape
LIVE CENTRES
The requirement for high cutting capacities and high working precision demands an additional support
by a revolving live centre for many workpieces due to their shape and length. Thanks to their
precision bearings, RÖHM live centres offer optimal force absorption and a maximum concentricity
deviation of up to 0.003 mm. Thanks to the lifetime lubrication, the centre points are maintenancefree.
Advantages
- Maximum concentricity and optimal force absorption thanks to proven precision bearings
- Special lubrication for long service life and little required maintenance
- Minimum interference contour thanks to slender housing shape
REVOLVING CENTERING TAPER
For counter-clamping workpieces with large boreholes, (e.g. pipes) on turning and grinding machines, in one set-up. The centre point of the revolving centering taper from RÖHM is hardened and ground for maximum wear resistance.
http://eshop.roehm.biz/roehm_de_en/online-shop/spitzen-stirnseiten-mitnehmer.html
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
Norton Clipper launches a new range of handheld drilling motors, CDM163 and CDM203. Both equipment are intended primarily for artisans, masons, plumbers, heating engineers and electricians and can also be used by contractors specializing in drilling.
I Norton Clippers CDM-sortiment ingår två modeller: CDM163 som har en motoreffekt på 1.800 W och är avsedd för våtborrning med borrkronor med en diameter på upp till 160 mm, och CDM203 med en motor på 2.000 W som kan användas för både torr- och våtborrning med borrkronor upp till 200 mm diameter. Den senare är särskilt lämplig för håltagning i armerad betong.
Hydra Solid Carbide Replaceable Head Drillsdario furlato
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
Similar to Brochure Norton Clipper hand-held petrol saws (20)
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
1. www.norton.eu
Saint-Gobain Abrasives S.A.
190 Bd J.F. Kennedy
L-4930 Bascharage
Luxembourg
Tel: +352 50401 1
Fax: +352 50163 3
sales.nlx@saint-gobain.com
Form 2392
Norton is a registered trademark of Saint-Gobain Abrasives.
Hand held
cut-off saws
POWERFUL
EASY START
INNOVATIVE
LONG LIFE
Low maintenance
MAKE DIAMOND
BLADE SAFETY
YOUR NUMBER
ONE PRIORITY
CUTTING DO’S
• Follow the manufacturer’s recommendations
regarding specifications for the material to be
cut and suitability for dry-cutting applications.
• Inspect the diamond saw blade for damage
from shipment or previous use.
• Inspect the diamond blade periodically during use
for core flatness, fatigue cracks, segment damage,
undercutting and damage to the arbor hole.
• Check the mounting flanges to be sure that they
are of equal or correct diameter, do not show
excessive wear and are flat.
• Be sure that the diamond blade is mounted
on a correct diameter blade shaft between proper
blade flanges and is securely hand-tightened
with the wrench provided or an adjustable
wrench no longer than 200mm.
• Consult the operating manual for proper machine
maintenance conditions.
• Check the machine for proper operating conditions:
- All fluids are at proper levels
- Blade shaft bearings are free of end and radial play
- V-Belts are properly tensioned and pulleys
checked for excessive wear.
- Blade guard is in place and properly secured
before operating.
• Be sure there is a continuous water flow to each
side of the wet-cutting blades. An adequate water
supply is required for wet-cutting blades to maintain
blade life and cutting efficiency.
• Follow the manufacturer’s recommended
pulley sizes and operating speeds. For specific
blade diameters, refer to manufacturer’s
operating manual.
Blade diameter (mm) Cutting depth (mm) Maximum safe speed (rpm)
300 100 6300
350 125 5460
HAND HELD CUT-OFF BLADES
Maximum blade cutting depths and recommended
operating speeds
For additional safety and use tips, refer to the
official OsA “DO’s & DONT’s” safety advice
(Organisation for the Safety of Abrasives).
Remember, your actions can prevent segment
loss and personal injury. Know and follow all
of the blade’s and saw’s safety rules.
The Norton Clipper hand held cut-off saws are covered by a 6-month commercial warranty, from the date of sale.
Warranty conditions are detailed in the instruction manual.
Know the do’s and don’ts of high-speed diamond blades
Whether the job is done by a large contractor or a homeowner, it’s very important that
he or she is aware of all safety concerns relating to diamond blades before they’re used.
Diamond blades mounted on petrol hand-held saws can rotate up
to 6,300 rpm for a 300mm diamond blade. With this in mind, it’s
easy to understand why safety has to be the number one priority.
Norton Clipper diamond blades comply with the most demanding
European safety regulations EN13236:2010.
Norton abrasive thin wheels comply perfectly with European
safety standard EN12413.
They are designed for specific applications, such as cutting
hard or abrasive materials or wet-and-dry cutting situations.
Due to these variations, it’s important that the correct diamond
blade is used for the appropriate job and the operator has been
instructed on the corresponding actions to do.
Technical Specifications CP512-300 CP512-300 iLube®
CP514-350 CP514-350i
Item No 70184647558 70184647560 70184647562 70184647564
EAN13 Barcode 5450248563105 5450248563112 5450248563129 5450248563136
CHARACTERISTICS CP512-300 CP512-300i CP514-350 CP514-350i
Max. blade diameter (mm) 300 300 350 350
Cutting depth (mm) 100 100 125 125
Arbor size (mm) 20 20 20 20
Blade flange diameter (mm) 100 100 100 100
Side of cut Centre Centre Centre Centre
Blade/Chain speed (rpm) 4450 4450 4450 4450
Blade shaft bearings Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed
Blade shaft drive 1 V-Belt 1 V-Belt 1 V-Belt 1 V-Belt
Motor Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic
lubrication
Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic lubrication
Maximum power (kW) 4.0 4.0 4.0 4.0
Engine speed (rpm) 9,500 9,500 9,500 9,500
Starter Manual recoil Manual recoil Manual recoil Manual recoil
Air filtration Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper
filter with 2-stage
pulsating air-stream
Electronic control carburettor
with Smart Choke
YES YES YES YES
Fuel capacity (l) 0.9 0.9 0.9 0.9
Oil capacity (l) - 0.32 - 0.32
Sound Level2,3
Lpeg
(EN ISO 19432 Annex B) dB(A)
98 98 98 98
Sound Power Level2,3
Lweg
(EN ISO 19432 Annex B) dB(A)
108 108 108 108
Weighted Effective Acceleration2,4
ahv,eq
(EN ISO 19432 Annex C)
Rear Handle / Top Handle m/s²
4,5 / 6,0 4,5 / 6,0 4,5 / 6,0 4,5 / 6,0
Net Weight (kg) 10.1 10.4 10.2 10.5
Height (mm) 430 430 430 430
Length (mm) 750 750 775 775
Width (mm) 267 267 267 267
Technical specifications
CP514-350i
with iLube®
automatic mix
CP514-350
standard
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
Saint-Gobain Abrasives Ltd
Doxey Road
Stafford
ST16 1EA
United Kingdom
Tel: +44 178 522 3281
Fax: +44 178 521 348
2. NORTON CLIPPER DIAMOND BLADES
Norton Clipper introduces a new
option for hand held cut-off saws.
Raw power for smooth, fast cuts with
features that prolong saw life, prevent
engine damage and guarantee everyday
reliability. Available in a standard version
and the patented iLube®
that mixes oil and
fuel electronically. No more pre-mixing.
Easy start without the hassle of a choke.
A five point vibration reduction system, v-belts
transferring power to the blade and a
semi-automatic belt tensioning system
for enhanced user experience.
Made in Germany
FAST ENOUGH TO GET
YOU ON AND OFF THE JOB.
TOUGH ENOUGH TO LAST.
Save costs through buying
fuel and oil separately.
Fill in the 2 distinct tanks and
the patented iLube®
system will
automatically mix oil and fuel
for maximum efficiency and
prevent damage.
No more overheating from
forgetting oil, or piston clogging
through too rich mixes.
No More Pre-Mixing Oil & Fuel
3-Step Easy Start
– Hot or Cold
The electronic carburettor’s
electro-magnetic valve
eliminates the standard choke
and half throttle start. Simply
turn the saw on, and:
1. Push the primer 3x
2. Push decompression button
3. Pull the recoil
The 6 key elements which
make the difference
• Easy starting
• Durability
• Performance
• Ease of use and maintenance
• Better ergonomics
• Low vibrations, dust,
emissions and noise
Multi- Stage Air Filtration
Patented twin-pipe interceptors
create an air pulsation that draws
fresh air in while pushing hot air
away from the engine and releasing
it out of the back to keep the saw
running cool and reduce debris
being trapped in the filter. The
external rocker wheel vibrates the
filter to further help release debris.
This system extends filter life for
less cleaning/replacement.
4kW
Classic uni
classic
Value for money sintered blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26811 5450248 353157 300 20 10/3,0
701846 26813 5450248 353171 350 25,4 10/3,2
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184611453 5450248185123 300 20 12/2,8
70184611455 5450248185147 300 25,4 12/2,8
70184611456 5450248185154 350 20 12/2,8
70184611458 5450248185178 350 25,4 12/2,8
SUPER BETON EVO
PRO
Very good value for money laser welded blade for intensive use
on a wide range of construction materials (dry or wet cutting).
EURO ZML EVO
PRO
Excellent Value for money. FAST CUTTING general
purpose laser blade with 10mm high segments.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 22225 5450248 233190 300 20 10/2,8
701846 22314 5450248 233213 300 25,4 10/2,8
701846 22315 5450248 233220 350 20 10/2,8
701846 22227 5450248 233237 350 25,4 10/2,8
CLASSIC Laser
CLASSIC
Good value for money laser welded diamond blade
for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26839 5450248 353461 300 20 10/2,5
701846 26840 5450248 353478 300 25,4 10/2,5
701846 26842 5450248 353492 350 25,4 10/2,8
GranitE turbo Laser
Pro
Fast cutting speed in a wide range of materials, especially designed
to perform in granite, natural stones and hard concrete.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26530 5450248 351016 300 20 12/3,2
701846 26529 5450248 351009 300 25,4 12/3,2
701846 26531 5450248 351023 350 20 12/3,2
701846 26532 5450248 351047 350 25,4 12/3,2
CLIPPER DYNAMIC
Clipper Dynamic is NORTON’s TOP-OF-THE-RANGE
product line incorporating the LATEST TECHNOLOGY in
segment and core design. The range is INNOVATIVE and
designed to meet the requirements of the professional
building and construction market with the HIGHEST
LEVELS OF PERFORMANCE with regard to speed of cut,
product life, ease of use and safety. These benefits result
in lower overall operating costs.
CLIPPER PRO
CLIPPER Pro is a range of HIGH PERFORMANCE
products delivering higher than average performance
with regard to speed of cut and product life. The products
are designed for EASE OF USE and manufactured to the
highest SAFETY standards. Perfect for PROFESSIONALS
and for INTENSIVE use.
CLIPPER CLASSIC
The Clipper Classic range is a QUALITY, COST EFFECTIVE
range giving a GOOD ALL ROUND performance with
regard to speed of cut and product life. The products are
manufactured to the same safety and quality standards
as the other ranges.
MULTIPURPOSE and VERSATILE diamond blade
with 12mm high laser welded segment.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184646881 5450248549994 300 20 12/3,0
70184646870 5450248548898 300 25,4 12/3,0
70184646154 5450248538448 350 25,4 12/3,2
70184646571 5450248545538 350 20 12/3,2
NEW
4x4 explorer +
the multi- purpose blade
Performance
Good Better Best
Dynamic
Pro
Classic
SILENCIO
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184629000 5450248398226 300 20 15/3,1
70184642421 5450248498308 300 25.4 15/3,1
70184647780 5450248570998 350 20 15/3,1
70184628999 5450248398219 350 25.4 15/3,1
FOR HAND HELD CUT-OFF SAWS ONLY:
Norton Silencio is one of our fastest cutting blades
with a silent steel centre and 15mm segment height.
Concrete and
concrete products
Reinforced concrete, cured concrete, kerb stones,
concrete pipes, engineering bricks, facing bricks,
refractory bricks, flagstones and paving stones, block
paving, washed gravel, concrete slabs, natural stone,
flint, sandstone, limestone.
DUO EXTREME +
Dynamic
The new Norton Clipper DUO EXTREME+ is 20% faster than
previous generation and has a unique dual segment shape.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184647787 5450248570745 300 20 15/3,0
70184647788 5450248570752 300 25.4 15/3,0
70184647789 5450248570769 350 20 15/3,2
70184647790 5450248570776 350 25.4 15/3,2
NEW
CLASSIC BETON
Classic
Good value for money laser welded blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184626869 5450248353621 300 20 10/2,8
70184626870 5450248353638 300 25,4 10/2,8
70184626871 5450248353645 350 20 10/2,8
70184626872 5450248353652 350 25,4 10/2,8
Universal use -
building materials
Reinforced concrete, cured concrete, kerbs, concrete
pipes, bricks, block paving, flagstones and paving
stones, washed gravel, concrete slabs, natural stone,
sandstone, limestone, flint.
4 different models of
Norton Clipper hand held
cut off saws are available:
• With Max. blade diameter of 300 or 350mm;
• With standard petrol+ 2% oil mix or iLube®
automatic mixing technology.
The magnesium blade guard improves safety and
reduces weight, while the ergonomic back-end handle
and enhanced weight balance prevent fatigue.
The Norton Clipper diamond blades range
offers a vast choice of products for all
cutting applications, 3 quality grades, 5
application colours to make sure you pick
the right product to fit on our Norton Clipper
handheld petrol saws.
Norton Clipper diamond blades are
among the most innovative and best
performing blades on the market
Norton clipper hand held cut-off saws BEST SELLERS
MOST COMMON HANDHELD
CUT-OFF MATERIAL APPLICATIONS:
3. NORTON CLIPPER DIAMOND BLADES
Norton Clipper introduces a new
option for hand held cut-off saws.
Raw power for smooth, fast cuts with
features that prolong saw life, prevent
engine damage and guarantee everyday
reliability. Available in a standard version
and the patented iLube®
that mixes oil and
fuel electronically. No more pre-mixing.
Easy start without the hassle of a choke.
A five point vibration reduction system, v-belts
transferring power to the blade and a
semi-automatic belt tensioning system
for enhanced user experience.
Made in Germany
FAST ENOUGH TO GET
YOU ON AND OFF THE JOB.
TOUGH ENOUGH TO LAST.
Save costs through buying
fuel and oil separately.
Fill in the 2 distinct tanks and
the patented iLube®
system will
automatically mix oil and fuel
for maximum efficiency and
prevent damage.
No more overheating from
forgetting oil, or piston clogging
through too rich mixes.
No More Pre-Mixing Oil & Fuel
3-Step Easy Start
– Hot or Cold
The electronic carburettor’s
electro-magnetic valve
eliminates the standard choke
and half throttle start. Simply
turn the saw on, and:
1. Push the primer 3x
2. Push decompression button
3. Pull the recoil
The 6 key elements which
make the difference
• Easy starting
• Durability
• Performance
• Ease of use and maintenance
• Better ergonomics
• Low vibrations, dust,
emissions and noise
Multi- Stage Air Filtration
Patented twin-pipe interceptors
create an air pulsation that draws
fresh air in while pushing hot air
away from the engine and releasing
it out of the back to keep the saw
running cool and reduce debris
being trapped in the filter. The
external rocker wheel vibrates the
filter to further help release debris.
This system extends filter life for
less cleaning/replacement.
4kW
Classic uni
classic
Value for money sintered blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26811 5450248 353157 300 20 10/3,0
701846 26813 5450248 353171 350 25,4 10/3,2
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184611453 5450248185123 300 20 12/2,8
70184611455 5450248185147 300 25,4 12/2,8
70184611456 5450248185154 350 20 12/2,8
70184611458 5450248185178 350 25,4 12/2,8
SUPER BETON EVO
PRO
Very good value for money laser welded blade for intensive use
on a wide range of construction materials (dry or wet cutting).
EURO ZML EVO
PRO
Excellent Value for money. FAST CUTTING general
purpose laser blade with 10mm high segments.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 22225 5450248 233190 300 20 10/2,8
701846 22314 5450248 233213 300 25,4 10/2,8
701846 22315 5450248 233220 350 20 10/2,8
701846 22227 5450248 233237 350 25,4 10/2,8
CLASSIC Laser
CLASSIC
Good value for money laser welded diamond blade
for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26839 5450248 353461 300 20 10/2,5
701846 26840 5450248 353478 300 25,4 10/2,5
701846 26842 5450248 353492 350 25,4 10/2,8
GranitE turbo Laser
Pro
Fast cutting speed in a wide range of materials, especially designed
to perform in granite, natural stones and hard concrete.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26530 5450248 351016 300 20 12/3,2
701846 26529 5450248 351009 300 25,4 12/3,2
701846 26531 5450248 351023 350 20 12/3,2
701846 26532 5450248 351047 350 25,4 12/3,2
CLIPPER DYNAMIC
Clipper Dynamic is NORTON’s TOP-OF-THE-RANGE
product line incorporating the LATEST TECHNOLOGY in
segment and core design. The range is INNOVATIVE and
designed to meet the requirements of the professional
building and construction market with the HIGHEST
LEVELS OF PERFORMANCE with regard to speed of cut,
product life, ease of use and safety. These benefits result
in lower overall operating costs.
CLIPPER PRO
CLIPPER Pro is a range of HIGH PERFORMANCE
products delivering higher than average performance
with regard to speed of cut and product life. The products
are designed for EASE OF USE and manufactured to the
highest SAFETY standards. Perfect for PROFESSIONALS
and for INTENSIVE use.
CLIPPER CLASSIC
The Clipper Classic range is a QUALITY, COST EFFECTIVE
range giving a GOOD ALL ROUND performance with
regard to speed of cut and product life. The products are
manufactured to the same safety and quality standards
as the other ranges.
MULTIPURPOSE and VERSATILE diamond blade
with 12mm high laser welded segment.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184646881 5450248549994 300 20 12/3,0
70184646870 5450248548898 300 25,4 12/3,0
70184646154 5450248538448 350 25,4 12/3,2
70184646571 5450248545538 350 20 12/3,2
NEW
4x4 explorer +
the multi- purpose blade
Performance
Good Better Best
Dynamic
Pro
Classic
SILENCIO
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184629000 5450248398226 300 20 15/3,1
70184642421 5450248498308 300 25.4 15/3,1
70184647780 5450248570998 350 20 15/3,1
70184628999 5450248398219 350 25.4 15/3,1
FOR HAND HELD CUT-OFF SAWS ONLY:
Norton Silencio is one of our fastest cutting blades
with a silent steel centre and 15mm segment height.
Concrete and
concrete products
Reinforced concrete, cured concrete, kerb stones,
concrete pipes, engineering bricks, facing bricks,
refractory bricks, flagstones and paving stones, block
paving, washed gravel, concrete slabs, natural stone,
flint, sandstone, limestone.
DUO EXTREME +
Dynamic
The new Norton Clipper DUO EXTREME+ is 20% faster than
previous generation and has a unique dual segment shape.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184647787 5450248570745 300 20 15/3,0
70184647788 5450248570752 300 25.4 15/3,0
70184647789 5450248570769 350 20 15/3,2
70184647790 5450248570776 350 25.4 15/3,2
NEW
CLASSIC BETON
Classic
Good value for money laser welded blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184626869 5450248353621 300 20 10/2,8
70184626870 5450248353638 300 25,4 10/2,8
70184626871 5450248353645 350 20 10/2,8
70184626872 5450248353652 350 25,4 10/2,8
Universal use -
building materials
Reinforced concrete, cured concrete, kerbs, concrete
pipes, bricks, block paving, flagstones and paving
stones, washed gravel, concrete slabs, natural stone,
sandstone, limestone, flint.
4 different models of
Norton Clipper hand held
cut off saws are available:
• With Max. blade diameter of 300 or 350mm;
• With standard petrol+ 2% oil mix or iLube®
automatic mixing technology.
The magnesium blade guard improves safety and
reduces weight, while the ergonomic back-end handle
and enhanced weight balance prevent fatigue.
The Norton Clipper diamond blades range
offers a vast choice of products for all
cutting applications, 3 quality grades, 5
application colours to make sure you pick
the right product to fit on our Norton Clipper
handheld petrol saws.
Norton Clipper diamond blades are
among the most innovative and best
performing blades on the market
Norton clipper hand held cut-off saws BEST SELLERS
MOST COMMON HANDHELD
CUT-OFF MATERIAL APPLICATIONS:
4. NORTON CLIPPER DIAMOND BLADES
Norton Clipper introduces a new
option for hand held cut-off saws.
Raw power for smooth, fast cuts with
features that prolong saw life, prevent
engine damage and guarantee everyday
reliability. Available in a standard version
and the patented iLube®
that mixes oil and
fuel electronically. No more pre-mixing.
Easy start without the hassle of a choke.
A five point vibration reduction system, v-belts
transferring power to the blade and a
semi-automatic belt tensioning system
for enhanced user experience.
Made in Germany
FAST ENOUGH TO GET
YOU ON AND OFF THE JOB.
TOUGH ENOUGH TO LAST.
Save costs through buying
fuel and oil separately.
Fill in the 2 distinct tanks and
the patented iLube®
system will
automatically mix oil and fuel
for maximum efficiency and
prevent damage.
No more overheating from
forgetting oil, or piston clogging
through too rich mixes.
No More Pre-Mixing Oil & Fuel
3-Step Easy Start
– Hot or Cold
The electronic carburettor’s
electro-magnetic valve
eliminates the standard choke
and half throttle start. Simply
turn the saw on, and:
1. Push the primer 3x
2. Push decompression button
3. Pull the recoil
The 6 key elements which
make the difference
• Easy starting
• Durability
• Performance
• Ease of use and maintenance
• Better ergonomics
• Low vibrations, dust,
emissions and noise
Multi- Stage Air Filtration
Patented twin-pipe interceptors
create an air pulsation that draws
fresh air in while pushing hot air
away from the engine and releasing
it out of the back to keep the saw
running cool and reduce debris
being trapped in the filter. The
external rocker wheel vibrates the
filter to further help release debris.
This system extends filter life for
less cleaning/replacement.
4kW
Classic uni
classic
Value for money sintered blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26811 5450248 353157 300 20 10/3,0
701846 26813 5450248 353171 350 25,4 10/3,2
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184611453 5450248185123 300 20 12/2,8
70184611455 5450248185147 300 25,4 12/2,8
70184611456 5450248185154 350 20 12/2,8
70184611458 5450248185178 350 25,4 12/2,8
SUPER BETON EVO
PRO
Very good value for money laser welded blade for intensive use
on a wide range of construction materials (dry or wet cutting).
EURO ZML EVO
PRO
Excellent Value for money. FAST CUTTING general
purpose laser blade with 10mm high segments.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 22225 5450248 233190 300 20 10/2,8
701846 22314 5450248 233213 300 25,4 10/2,8
701846 22315 5450248 233220 350 20 10/2,8
701846 22227 5450248 233237 350 25,4 10/2,8
CLASSIC Laser
CLASSIC
Good value for money laser welded diamond blade
for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26839 5450248 353461 300 20 10/2,5
701846 26840 5450248 353478 300 25,4 10/2,5
701846 26842 5450248 353492 350 25,4 10/2,8
GranitE turbo Laser
Pro
Fast cutting speed in a wide range of materials, especially designed
to perform in granite, natural stones and hard concrete.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
701846 26530 5450248 351016 300 20 12/3,2
701846 26529 5450248 351009 300 25,4 12/3,2
701846 26531 5450248 351023 350 20 12/3,2
701846 26532 5450248 351047 350 25,4 12/3,2
CLIPPER DYNAMIC
Clipper Dynamic is NORTON’s TOP-OF-THE-RANGE
product line incorporating the LATEST TECHNOLOGY in
segment and core design. The range is INNOVATIVE and
designed to meet the requirements of the professional
building and construction market with the HIGHEST
LEVELS OF PERFORMANCE with regard to speed of cut,
product life, ease of use and safety. These benefits result
in lower overall operating costs.
CLIPPER PRO
CLIPPER Pro is a range of HIGH PERFORMANCE
products delivering higher than average performance
with regard to speed of cut and product life. The products
are designed for EASE OF USE and manufactured to the
highest SAFETY standards. Perfect for PROFESSIONALS
and for INTENSIVE use.
CLIPPER CLASSIC
The Clipper Classic range is a QUALITY, COST EFFECTIVE
range giving a GOOD ALL ROUND performance with
regard to speed of cut and product life. The products are
manufactured to the same safety and quality standards
as the other ranges.
MULTIPURPOSE and VERSATILE diamond blade
with 12mm high laser welded segment.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184646881 5450248549994 300 20 12/3,0
70184646870 5450248548898 300 25,4 12/3,0
70184646154 5450248538448 350 25,4 12/3,2
70184646571 5450248545538 350 20 12/3,2
NEW
4x4 explorer +
the multi- purpose blade
Performance
Good Better Best
Dynamic
Pro
Classic
SILENCIO
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184629000 5450248398226 300 20 15/3,1
70184642421 5450248498308 300 25.4 15/3,1
70184647780 5450248570998 350 20 15/3,1
70184628999 5450248398219 350 25.4 15/3,1
FOR HAND HELD CUT-OFF SAWS ONLY:
Norton Silencio is one of our fastest cutting blades
with a silent steel centre and 15mm segment height.
Concrete and
concrete products
Reinforced concrete, cured concrete, kerb stones,
concrete pipes, engineering bricks, facing bricks,
refractory bricks, flagstones and paving stones, block
paving, washed gravel, concrete slabs, natural stone,
flint, sandstone, limestone.
DUO EXTREME +
Dynamic
The new Norton Clipper DUO EXTREME+ is 20% faster than
previous generation and has a unique dual segment shape.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184647787 5450248570745 300 20 15/3,0
70184647788 5450248570752 300 25.4 15/3,0
70184647789 5450248570769 350 20 15/3,2
70184647790 5450248570776 350 25.4 15/3,2
NEW
CLASSIC BETON
Classic
Good value for money laser welded blade for dry or wet cutting.
Item No EN 13 Code Ø(mm) Bore(mm) Segment (H/W)
70184626869 5450248353621 300 20 10/2,8
70184626870 5450248353638 300 25,4 10/2,8
70184626871 5450248353645 350 20 10/2,8
70184626872 5450248353652 350 25,4 10/2,8
Universal use -
building materials
Reinforced concrete, cured concrete, kerbs, concrete
pipes, bricks, block paving, flagstones and paving
stones, washed gravel, concrete slabs, natural stone,
sandstone, limestone, flint.
4 different models of
Norton Clipper hand held
cut off saws are available:
• With Max. blade diameter of 300 or 350mm;
• With standard petrol+ 2% oil mix or iLube®
automatic mixing technology.
The magnesium blade guard improves safety and
reduces weight, while the ergonomic back-end handle
and enhanced weight balance prevent fatigue.
The Norton Clipper diamond blades range
offers a vast choice of products for all
cutting applications, 3 quality grades, 5
application colours to make sure you pick
the right product to fit on our Norton Clipper
handheld petrol saws.
Norton Clipper diamond blades are
among the most innovative and best
performing blades on the market
Norton clipper hand held cut-off saws BEST SELLERS
MOST COMMON HANDHELD
CUT-OFF MATERIAL APPLICATIONS:
5. www.norton.eu
Saint-Gobain Abrasives S.A.
190 Bd J.F. Kennedy
L-4930 Bascharage
Luxembourg
Tel: +352 50401 1
Fax: +352 50163 3
sales.nlx@saint-gobain.com
Form 2392
Norton is a registered trademark of Saint-Gobain Abrasives.
Hand held
cut-off saws
POWERFUL
EASY START
INNOVATIVE
LONG LIFE
Low maintenance
MAKE DIAMOND
BLADE SAFETY
YOUR NUMBER
ONE PRIORITY
CUTTING DO’S
• Follow the manufacturer’s recommendations
regarding specifications for the material to be
cut and suitability for dry-cutting applications.
• Inspect the diamond saw blade for damage
from shipment or previous use.
• Inspect the diamond blade periodically during use
for core flatness, fatigue cracks, segment damage,
undercutting and damage to the arbor hole.
• Check the mounting flanges to be sure that they
are of equal or correct diameter, do not show
excessive wear and are flat.
• Be sure that the diamond blade is mounted
on a correct diameter blade shaft between proper
blade flanges and is securely hand-tightened
with the wrench provided or an adjustable
wrench no longer than 200mm.
• Consult the operating manual for proper machine
maintenance conditions.
• Check the machine for proper operating conditions:
- All fluids are at proper levels
- Blade shaft bearings are free of end and radial play
- V-Belts are properly tensioned and pulleys
checked for excessive wear.
- Blade guard is in place and properly secured
before operating.
• Be sure there is a continuous water flow to each
side of the wet-cutting blades. An adequate water
supply is required for wet-cutting blades to maintain
blade life and cutting efficiency.
• Follow the manufacturer’s recommended
pulley sizes and operating speeds. For specific
blade diameters, refer to manufacturer’s
operating manual.
Blade diameter (mm) Cutting depth (mm) Maximum safe speed (rpm)
300 100 6300
350 125 5460
HAND HELD CUT-OFF BLADES
Maximum blade cutting depths and recommended
operating speeds
For additional safety and use tips, refer to the
official OsA “DO’s & DONT’s” safety advice
(Organisation for the Safety of Abrasives).
Remember, your actions can prevent segment
loss and personal injury. Know and follow all
of the blade’s and saw’s safety rules.
The Norton Clipper hand held cut-off saws are covered by a 6-month commercial warranty, from the date of sale.
Warranty conditions are detailed in the instruction manual.
Know the do’s and don’ts of high-speed diamond blades
Whether the job is done by a large contractor or a homeowner, it’s very important that
he or she is aware of all safety concerns relating to diamond blades before they’re used.
Diamond blades mounted on petrol hand-held saws can rotate up
to 6,300 rpm for a 300mm diamond blade. With this in mind, it’s
easy to understand why safety has to be the number one priority.
Norton Clipper diamond blades comply with the most demanding
European safety regulations EN13236:2010.
Norton abrasive thin wheels comply perfectly with European
safety standard EN12413.
They are designed for specific applications, such as cutting
hard or abrasive materials or wet-and-dry cutting situations.
Due to these variations, it’s important that the correct diamond
blade is used for the appropriate job and the operator has been
instructed on the corresponding actions to do.
Technical Specifications CP512-300 CP512-300 iLube®
CP514-350 CP514-350i
Item No 70184647558 70184647560 70184647562 70184647564
EAN13 Barcode 5450248563105 5450248563112 5450248563129 5450248563136
CHARACTERISTICS CP512-300 CP512-300i CP514-350 CP514-350i
Max. blade diameter (mm) 300 300 350 350
Cutting depth (mm) 100 100 125 125
Arbor size (mm) 20 20 20 20
Blade flange diameter (mm) 100 100 100 100
Side of cut Centre Centre Centre Centre
Blade/Chain speed (rpm) 4450 4450 4450 4450
Blade shaft bearings Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed
Blade shaft drive 1 V-Belt 1 V-Belt 1 V-Belt 1 V-Belt
Motor Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic
lubrication
Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic lubrication
Maximum power (kW) 4.0 4.0 4.0 4.0
Engine speed (rpm) 9,500 9,500 9,500 9,500
Starter Manual recoil Manual recoil Manual recoil Manual recoil
Air filtration Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper
filter with 2-stage
pulsating air-stream
Electronic control carburettor
with Smart Choke
YES YES YES YES
Fuel capacity (l) 0.9 0.9 0.9 0.9
Oil capacity (l) - 0.32 - 0.32
Sound Level2,3
Lpeg
(EN ISO 19432 Annex B) dB(A)
98 98 98 98
Sound Power Level2,3
Lweg
(EN ISO 19432 Annex B) dB(A)
108 108 108 108
Weighted Effective Acceleration2,4
ahv,eq
(EN ISO 19432 Annex C)
Rear Handle / Top Handle m/s²
4,5 / 6,0 4,5 / 6,0 4,5 / 6,0 4,5 / 6,0
Net Weight (kg) 10.1 10.4 10.2 10.5
Height (mm) 430 430 430 430
Length (mm) 750 750 775 775
Width (mm) 267 267 267 267
Technical specifications
CP514-350i
with iLube®
automatic mix
CP514-350
standard
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
Saint-Gobain Abrasives Ltd
Doxey Road
Stafford
ST16 1EA
United Kingdom
Tel: +44 178 522 3281
Fax: +44 178 521 348
6. www.norton.eu
Saint-Gobain Abrasives S.A.
190 Bd J.F. Kennedy
L-4930 Bascharage
Luxembourg
Tel: +352 50401 1
Fax: +352 50163 3
sales.nlx@saint-gobain.com
Form 2392
Norton is a registered trademark of Saint-Gobain Abrasives.
Hand held
cut-off saws
POWERFUL
EASY START
INNOVATIVE
LONG LIFE
Low maintenance
MAKE DIAMOND
BLADE SAFETY
YOUR NUMBER
ONE PRIORITY
CUTTING DO’S
• Follow the manufacturer’s recommendations
regarding specifications for the material to be
cut and suitability for dry-cutting applications.
• Inspect the diamond saw blade for damage
from shipment or previous use.
• Inspect the diamond blade periodically during use
for core flatness, fatigue cracks, segment damage,
undercutting and damage to the arbor hole.
• Check the mounting flanges to be sure that they
are of equal or correct diameter, do not show
excessive wear and are flat.
• Be sure that the diamond blade is mounted
on a correct diameter blade shaft between proper
blade flanges and is securely hand-tightened
with the wrench provided or an adjustable
wrench no longer than 200mm.
• Consult the operating manual for proper machine
maintenance conditions.
• Check the machine for proper operating conditions:
- All fluids are at proper levels
- Blade shaft bearings are free of end and radial play
- V-Belts are properly tensioned and pulleys
checked for excessive wear.
- Blade guard is in place and properly secured
before operating.
• Be sure there is a continuous water flow to each
side of the wet-cutting blades. An adequate water
supply is required for wet-cutting blades to maintain
blade life and cutting efficiency.
• Follow the manufacturer’s recommended
pulley sizes and operating speeds. For specific
blade diameters, refer to manufacturer’s
operating manual.
Blade diameter (mm) Cutting depth (mm) Maximum safe speed (rpm)
300 100 6300
350 125 5460
HAND HELD CUT-OFF BLADES
Maximum blade cutting depths and recommended
operating speeds
For additional safety and use tips, refer to the
official OsA “DO’s & DONT’s” safety advice
(Organisation for the Safety of Abrasives).
Remember, your actions can prevent segment
loss and personal injury. Know and follow all
of the blade’s and saw’s safety rules.
The Norton Clipper hand held cut-off saws are covered by a 6-month commercial warranty, from the date of sale.
Warranty conditions are detailed in the instruction manual.
Know the do’s and don’ts of high-speed diamond blades
Whether the job is done by a large contractor or a homeowner, it’s very important that
he or she is aware of all safety concerns relating to diamond blades before they’re used.
Diamond blades mounted on petrol hand-held saws can rotate up
to 6,300 rpm for a 300mm diamond blade. With this in mind, it’s
easy to understand why safety has to be the number one priority.
Norton Clipper diamond blades comply with the most demanding
European safety regulations EN13236:2010.
Norton abrasive thin wheels comply perfectly with European
safety standard EN12413.
They are designed for specific applications, such as cutting
hard or abrasive materials or wet-and-dry cutting situations.
Due to these variations, it’s important that the correct diamond
blade is used for the appropriate job and the operator has been
instructed on the corresponding actions to do.
Technical Specifications CP512-300 CP512-300 iLube®
CP514-350 CP514-350i
Item No 70184647558 70184647560 70184647562 70184647564
EAN13 Barcode 5450248563105 5450248563112 5450248563129 5450248563136
CHARACTERISTICS CP512-300 CP512-300i CP514-350 CP514-350i
Max. blade diameter (mm) 300 300 350 350
Cutting depth (mm) 100 100 125 125
Arbor size (mm) 20 20 20 20
Blade flange diameter (mm) 100 100 100 100
Side of cut Centre Centre Centre Centre
Blade/Chain speed (rpm) 4450 4450 4450 4450
Blade shaft bearings Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed Heavy Duty Sealed
Blade shaft drive 1 V-Belt 1 V-Belt 1 V-Belt 1 V-Belt
Motor Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic
lubrication
Single-Cylinder
Two-Stroke engine
Single-Cylinder
Two-Stroke engine,
with iLube®
automatic lubrication
Maximum power (kW) 4.0 4.0 4.0 4.0
Engine speed (rpm) 9,500 9,500 9,500 9,500
Starter Manual recoil Manual recoil Manual recoil Manual recoil
Air filtration Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper filter
with 2-stage pulsating
air-stream
Heavy Duty paper
filter with 2-stage
pulsating air-stream
Electronic control carburettor
with Smart Choke
YES YES YES YES
Fuel capacity (l) 0.9 0.9 0.9 0.9
Oil capacity (l) - 0.32 - 0.32
Sound Level2,3
Lpeg
(EN ISO 19432 Annex B) dB(A)
98 98 98 98
Sound Power Level2,3
Lweg
(EN ISO 19432 Annex B) dB(A)
108 108 108 108
Weighted Effective Acceleration2,4
ahv,eq
(EN ISO 19432 Annex C)
Rear Handle / Top Handle m/s²
4,5 / 6,0 4,5 / 6,0 4,5 / 6,0 4,5 / 6,0
Net Weight (kg) 10.1 10.4 10.2 10.5
Height (mm) 430 430 430 430
Length (mm) 750 750 775 775
Width (mm) 267 267 267 267
Technical specifications
CP514-350i
with iLube®
automatic mix
CP514-350
standard
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
Saint-Gobain Abrasives Ltd
Doxey Road
Stafford
ST16 1EA
United Kingdom
Tel: +44 178 522 3281
Fax: +44 178 521 348