The document discusses three types of press fit joints - kidney, square cross, and other angles - that could be used in building office partitions and furniture. The kidney joint uses a 90 degree angle and could also be used in steel structures with welding. The square cross joint and other angle joints can be customized according to user needs and whether the joint body should be inside or outside the object being made.

1. The following designs show NOT complete design of objects but press fit JOINTS and could be applied in Building OFFICE PARTITIONS and FURNITURE RODUCTIONS. Press Fit Joints

2. Production… The different joints designed and ‘plotted’ on the Laser Cutter…

4. 1. Kidney Type Joint Here the Joint used is 90’ (Notice the body of the Joint)

5. I think this Joint can also be used in steel structures made of steel and aided with Welding… 2. Square Cross Type Joint

6. Other Angles Angles may be set according to users’ need and should be determined as to put the body of the joint Inside or Outside the object to be made…

7. … and combinations fsdfjkasdjfksjadkfjsadkfjasjdkfjsdjfsajdkfksadj Other 60deg. Kidney type 90 deg