Presentation adani
•Download as PPTX, PDF•
0 likes•465 views
The document summarizes an industry visit to the Adani Power plant in Tiroda, Maharashtra. The 660 MW power plant sources coal from China and produces electricity through a thermal power process. It uses over 4 million tons of coal per year across 1750 hectares of land, 1600 of which were forest land. Key contacts and department heads are listed. The plant reuses water and has security measures in place. Opportunities for improvement include better utilization of ash waste and addressing coal availability limitations.
Report
Share
Report
Share
Recommended
Mechanized rice production in Bangladesh: Utilization of the SI Assessment Fr...
Presented by Vara Prasad [Sustainable Intensification Innovation Lab - Kansas State University] about mechanized rice production in Bangladesh. This poster was presented on 5 - 8 February 2019 at the Africa RISING Program Learning Event.
Grease Trap Waste Treatment Facility
The document describes a proposed sustainable grease trap waste treatment facility with a capacity of 15,000 gallons per day located at Wright Smith, Jr. WWTP. The facility would use an automated receiving station, storage tanks, an odor control system, and grease treatment equipment to process the waste through filtration and dewatering using materials like diatomaceous earth or rice husk ash. The filtered solids could be used as bedding, soil conditioners, compost feedstock, or rendering material. Extracted brown grease could potentially be used as biofuel or feedstock.
Mc carron v0.1 3 23-15
This document provides an overview of open windrow composting operations at Sam White and Sons in Middleboro, Massachusetts. It discusses the site layout, base operations using leaves, grass and other organics, and food waste operations with a focus on plastic contamination issues. It describes the incoming materials, windrow formation, turning equipment used, and results of screening a food waste load that contained plastic contaminants. The summary emphasizes that source separation, clean loads, compost turning, and screening can help address contamination, but the end market will determine the viability of the compost.
Environment Agency Waste Technologies in Practice Conference
The document discusses anaerobic digestion and mechanical biological treatment technologies and their integration with combined heat and power (CHP) systems. It provides an overview of Clarke Energy, a distributor of GE Jenbacher gas engines, and highlights their role in the UK renewable energy market. Specific technologies and projects involving Clarke Energy's gas engines combined with anaerobic digestion and mechanical biological treatment facilities are also summarized.
SUGAR COGEN PPT PPP NTPC DIM MNRE 25APR15
The document provides an overview of a presentation on sugar cogeneration and public-private partnerships in India. It discusses India's energy needs and resources, outlines a build-own-operate-transfer model for sugar cogeneration projects, and analyzes the technical and financial feasibility of potential projects at various sugar mills based on their operating parameters and fuel availability. Real-time integrated analysis of sample projects is presented, including heat and mass balances, capital costs, revenue projections, and financial analyses.
PPI Perspective Forest Fragmentation Eng
Situation: 98% of the Galician forest is in private hand. On average, forest holdings are less than 2 ha in size and split into 2 or 3 plots which are often located far away from each other. 80% of the private properties are less than 0.5 ha in size. In addition, forest owners are often old.
Approach: Land swapping was encouraged for economic and social reasons, with the active support of the forest industries and recently also the Galician authorities.
Port visit Mundra
The document provides a detailed report on a 3-day port visit by students to Mundra Port in India. It includes:
- A history of Mundra Port since 1994 and its expansion over the years into multiple ports across India.
- Details about the infrastructure and facilities at Mundra Port including terminals, railway lines, and the Mundra Special Economic Zone (SEZ).
- The key advantages of operating within the Mundra SEZ including various fiscal incentives and exemptions from taxes, as well as operational benefits like single window clearances.
mundra port
Mundra Port is located in Gujarat and has 8 multipurpose berths capable of handling large vessels. It has various modes of connectivity including rail, road, air, and pipeline. The port is managed by a team led by a CEO and heads of operations, engineering, marketing, IT, finance, HR, and QHSE. Key infrastructure includes over 1 million TEU capacity, rail tracks, yard and stacking areas, and equipment like quay cranes and yardside vehicles. The port has achieved several awards and certifications for its operations and facilities.
Recommended
Mechanized rice production in Bangladesh: Utilization of the SI Assessment Fr...
Presented by Vara Prasad [Sustainable Intensification Innovation Lab - Kansas State University] about mechanized rice production in Bangladesh. This poster was presented on 5 - 8 February 2019 at the Africa RISING Program Learning Event.
Grease Trap Waste Treatment Facility
The document describes a proposed sustainable grease trap waste treatment facility with a capacity of 15,000 gallons per day located at Wright Smith, Jr. WWTP. The facility would use an automated receiving station, storage tanks, an odor control system, and grease treatment equipment to process the waste through filtration and dewatering using materials like diatomaceous earth or rice husk ash. The filtered solids could be used as bedding, soil conditioners, compost feedstock, or rendering material. Extracted brown grease could potentially be used as biofuel or feedstock.
Mc carron v0.1 3 23-15
This document provides an overview of open windrow composting operations at Sam White and Sons in Middleboro, Massachusetts. It discusses the site layout, base operations using leaves, grass and other organics, and food waste operations with a focus on plastic contamination issues. It describes the incoming materials, windrow formation, turning equipment used, and results of screening a food waste load that contained plastic contaminants. The summary emphasizes that source separation, clean loads, compost turning, and screening can help address contamination, but the end market will determine the viability of the compost.
Environment Agency Waste Technologies in Practice Conference
The document discusses anaerobic digestion and mechanical biological treatment technologies and their integration with combined heat and power (CHP) systems. It provides an overview of Clarke Energy, a distributor of GE Jenbacher gas engines, and highlights their role in the UK renewable energy market. Specific technologies and projects involving Clarke Energy's gas engines combined with anaerobic digestion and mechanical biological treatment facilities are also summarized.
SUGAR COGEN PPT PPP NTPC DIM MNRE 25APR15
The document provides an overview of a presentation on sugar cogeneration and public-private partnerships in India. It discusses India's energy needs and resources, outlines a build-own-operate-transfer model for sugar cogeneration projects, and analyzes the technical and financial feasibility of potential projects at various sugar mills based on their operating parameters and fuel availability. Real-time integrated analysis of sample projects is presented, including heat and mass balances, capital costs, revenue projections, and financial analyses.
PPI Perspective Forest Fragmentation Eng
Situation: 98% of the Galician forest is in private hand. On average, forest holdings are less than 2 ha in size and split into 2 or 3 plots which are often located far away from each other. 80% of the private properties are less than 0.5 ha in size. In addition, forest owners are often old.
Approach: Land swapping was encouraged for economic and social reasons, with the active support of the forest industries and recently also the Galician authorities.
Port visit Mundra
The document provides a detailed report on a 3-day port visit by students to Mundra Port in India. It includes:
- A history of Mundra Port since 1994 and its expansion over the years into multiple ports across India.
- Details about the infrastructure and facilities at Mundra Port including terminals, railway lines, and the Mundra Special Economic Zone (SEZ).
- The key advantages of operating within the Mundra SEZ including various fiscal incentives and exemptions from taxes, as well as operational benefits like single window clearances.
mundra port
Mundra Port is located in Gujarat and has 8 multipurpose berths capable of handling large vessels. It has various modes of connectivity including rail, road, air, and pipeline. The port is managed by a team led by a CEO and heads of operations, engineering, marketing, IT, finance, HR, and QHSE. Key infrastructure includes over 1 million TEU capacity, rail tracks, yard and stacking areas, and equipment like quay cranes and yardside vehicles. The port has achieved several awards and certifications for its operations and facilities.
Annex 20 (myanmar) renewable energy
This document provides an overview of renewable energy resources and rural development in Myanmar. It details Myanmar's energy sector, policies, and status. Key renewable resources include hydropower (108,000 MW potential), biomass (significant potential from forestry and agriculture), and solar and wind power. The goals of renewable energy development are to ensure energy security and food security while reducing poverty and pollution. Examples of renewable projects discussed include solar home systems, micro-hydropower plants, biogas digesters, and the use of agricultural residues for gasification. The document also examines CDM possibilities in Myanmar.
Production of-renewable-energy-from-biological-sources
This document discusses using rice husk as a renewable energy source in Bangladesh. It begins by introducing renewable energy and noting the benefits. It then discusses Bangladesh's energy resources and potential for renewable energy. A major focus is on generating electricity from rice husk, which is a substantial biomass waste product from rice production. The document outlines the process of gasification and electricity generation from rice husk. It provides national and international case studies of existing rice husk power plants. Finally, it discusses the feasibility and challenges of implementing rice husk power generation projects in Bangladesh.
PRESENTATION
The document provides information about Akhilesh Kumar's summer training project at South Eastern Coal Field Limited's Gevra project in Chhattisgarh, India. It discusses Coal India Limited, the largest coal producer in India. It then describes the Gevra project, the largest open cast mine in Asia. The project involved studying heavy earth moving machines like dumpers, shovels, drills, and dozers used at the mine. Information about various machines, their specifications and functions is presented. The annual coal production for 2012-2013 is reported and plans to increase production capacity for 2013-2014 through larger machines are mentioned.
Environmental Management Practices in a Super Thermal Power Plant.
This document discusses environmental management practices at NTPC's Super Thermal Power Plant in Kaniha, India. It begins with an overview of thermal power plants and their environmental impacts. It then discusses NTPC, India's largest power producer, and its 3000MW Kaniha plant. The document outlines various environmental problems caused by thermal plants and the steps NTPC takes to mitigate them at Kaniha, including an effluent treatment plant, ash water recirculation, and solar power generation. It provides a case study of Kaniha's zero discharge system that treats and recycles all water. The document concludes that while thermal plants are necessary for India's development, strong environmental policies and practices are also needed.
Rampal power-plant-presentation
This document provides information about the Rampal Power Plant group presentation. It includes the list of group members, project details, environmental issues, and the government's response. The key points are:
- The presentation is about the Rampal Power Plant located in Khulna, Bangladesh.
- It will be a 2600 MW coal-fired power plant built 14 km from the Sundarbans mangrove forest.
- There are concerns about the environmental and health impacts of coal transportation and emissions on the Sundarbans ecosystem and local communities.
Grassroots Technological Innovations.pdf
1. The National Innovation Foundation - India (NIF) was founded in 2000 to promote grassroots innovations in India. It has scouted over 2,25,000 ideas from indigenous innovators across India.
2. NIF supports grassroots innovators through various functions like validation and value addition of innovations, intellectual property management, enterprise development, and dissemination of innovations. It has supported over 1000 projects and transferred 89 technologies to licensees.
3. Examples are provided of successful start-ups by grassroots innovators in India that were supported by NIF, including innovations in groundnut harvesting, paddy threshing, tree climbing, herbal processing, and biomass gasification. These start-
Presentation
This presentation discusses hybrid cogeneration power plants. It begins by defining cogeneration as the simultaneous generation of electricity and steam. It then discusses the types of industries that can benefit from cogeneration and the advantages it provides in reducing costs compared to using diesel generators. The presentation provides details on typical cogeneration plant components, configurations, costs and financial metrics. It also discusses policy support in India for biomass projects and the viability of napier grass as a fuel. Overall, the presentation provides an overview of hybrid cogeneration plants and makes a proposal for a comprehensive solution to set up a 3 MW plant.
Thermal Power Plant
Thermal Power Plant located in Ohio generates electricity from coal. It has a capacity of 2000 MW and supplies 1.5 million customers. The plant receives 21,000 tons of coal per day via barge, rail, and trucks. Coal is pulverized and fed into boilers heated to 1000°C to power turbines that generate electricity. Emissions are controlled through scrubbers that absorb 92% of sulfur and particulate pollutants and a SCR system that converts nitrogen oxides to pure nitrogen using ammonia. Ash and scrubber byproducts are reused in concrete, roads, and drywall.
Building a New Economy: Creating Value from Waste
An expert discusses building a new economy based on creating value from waste in Oman. Key points include:
- Rapid industrial growth in Sohar is increasing waste production which can be managed through transformation rather than disposal.
- Wastes like plastic, food, and e-waste can be transformed into valuable products and materials through approaches like integrated resource recovery (IR2).
- IR2 produces efficient transformation of wastes to generate energy and materials, treating wastes as resources. This prevents pollution while enhancing employment, income, and industry sustainability.
Fly ash as a wood substitute
Fly ash is a waste material produced from coal combustion in thermal power plants that causes pollution problems. It can be used as a wood substitute material to create doors, windows, furniture and other wood products in an environmentally friendly and cost effective way. A proposed plant would produce 12,000 square meters of fly ash composite doors and panels annually, requiring an investment of $263,000. Fly ash products are stronger, more durable and require less maintenance than wood while utilizing an industrial waste.
industrial training ppt
The document provides an overview of Punjab Chemicals and Crop Protection Ltd., including its history, departments, manufacturing plants, and effluent treatment processes. It describes that PCCPL is located in Bhankarpur, India, employs 500 people, and is the world's largest producer of oxalic acid and its derivatives. Key departments discussed include Maintenance, Refrigeration, Boiler House, Electrical, Oxalic Acid Plant, Sodium Nitrite Plant, and Effluent Treatment Plant.
Training report-hzl-cszl
This document provides a summary of Anil Maurya's practical training report at Hindustan Zinc Limited's Chanderia Lead-Zinc Smelter in Chittorgarh, Rajasthan from July 16 to August 16, 2013. The report describes the various processes at the smelter plant including the sinter plant, zinc circuit, wet gas scrubber system, and lead circuit. It also includes an introduction to the company and location, safety procedures, abbreviations used, and the power and motor control systems. The sinter plant section focuses on raw material handling, proportioning, the sinter machine, product handling, and ventilation systems. Large motors up to 2600KW are used including the SO2
Vot agrosack from kenaf fibre presentation
The document discusses a project report on VOT (Vegetable Oil Treated) agro-sacks. Some key points:
- MOT (Mineral Oil Treated) agro-sacks have been banned for exceeding acceptable unsaponifiable matter levels. VOT sacks contain safe levels and do not contaminate commodities.
- There is global demand for VOT sacks as standards have been updated to ban MOT sacks and accept VOT sacks for commodities.
- The report proposes cultivating kenaf in Nigeria for use in producing VOT sacks, as kenaf fiber is strong and Nigeria's climate is suitable. It provides details on machinery and costs required for a 400
Final work
This document provides details about the Vidhyadhar Nagar development project in Jaipur, India. It was developed on 400 hectares of land 3.5 km from Jaipur city between 1980-1986. The master plan was designed by architect B.V. Doshi based on principles of sustainability, energy efficiency, and resilience to natural disasters inspired by traditional Jaipuri city planning principles. The development included residential, commercial, and institutional areas organized around a central spine and integrated green spaces with the goal of becoming a self-sufficient, environmentally-friendly city.
International roundup a comprehensive report on the state of the global mac...
The document discusses Guatemala's macadamia industry, noting that over 1.2 million macadamia trees are planted across 9,000 hectares of land, with 90% of macadamia farms also operating coffee farms. It provides details on cultivation conditions, varieties planted, harvesting and processing methods used, as well as concerns about wind damage, nutrition, and diseases affecting production. Future production estimates indicate shelled kernel production could reach over 2,000 metric tons annually by 2022.
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC is India's largest power company established in 1975. NTPC operates the 2600 MW Korba Super Thermal Power Plant located in Chhattisgarh, India. The plant sources coal from local mines using a merry-go-round rail system. The coal is crushed and milled before being burned in the boiler to produce steam that drives the turbine generator, producing electricity. Flue gases pass through an electrostatic precipitator before being released through the chimney. The generator outputs electricity at 15.75 kV which is stepped up to 400 kV by transformers before connecting to the transmission grid.
Plat design on cashew processing
This document provides information for planning a cashew processing plant, including site selection factors, raw material availability, equipment specifications, process flow chart, material and energy balances, and a Gantt chart schedule. Key factors for site selection include climate, transportation access, and raw material availability. The process flow involves cleaning, soaking, roasting, shelling, grading, drying, peeling and packaging cashew kernels. Equipment specifications and capacities are listed for each stage.
Protected Cultivation
This document provides information about protected cultivation and precision farming. It discusses different types of greenhouses like polyhouses, shade net houses, and tunnels. It outlines the optimal environmental parameters for plant growth in protected structures like temperature, humidity, light, carbon dioxide, and air flow. It also discusses the role of an agricultural engineer in designing protected structures and instrumentation used to monitor the microclimate. Examples of different greenhouse designs seen on farm visits are provided. The document concludes with examples of greenhouse technologies used to produce crops year-round.
Renewable Gas for the large industry sector - The road to Ireland's low carbo...
Presentation from a Renewable Gas event held on the 15th March 2016. Outlines how large industries can access renewable heat.
biomass_gasification (1).ppt
Ankur Scientific Energy Technologies Pvt. Ltd. proposes using biomass gasification and distributed power generation to provide sustainable economic development for rural areas of India and Africa. The company focuses on implementing distributed power generation systems from 500 kWe to 2 MWe, connected to rural 11 kV grids, and smaller 10-kWe systems for individual village electrification. Biomass gasification is presented as an attractive technology for decentralized distributed generation that addresses issues of biomass resource management and distribution compared to larger centralized plants.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
More Related Content
Similar to Presentation adani
Annex 20 (myanmar) renewable energy
This document provides an overview of renewable energy resources and rural development in Myanmar. It details Myanmar's energy sector, policies, and status. Key renewable resources include hydropower (108,000 MW potential), biomass (significant potential from forestry and agriculture), and solar and wind power. The goals of renewable energy development are to ensure energy security and food security while reducing poverty and pollution. Examples of renewable projects discussed include solar home systems, micro-hydropower plants, biogas digesters, and the use of agricultural residues for gasification. The document also examines CDM possibilities in Myanmar.
Production of-renewable-energy-from-biological-sources
This document discusses using rice husk as a renewable energy source in Bangladesh. It begins by introducing renewable energy and noting the benefits. It then discusses Bangladesh's energy resources and potential for renewable energy. A major focus is on generating electricity from rice husk, which is a substantial biomass waste product from rice production. The document outlines the process of gasification and electricity generation from rice husk. It provides national and international case studies of existing rice husk power plants. Finally, it discusses the feasibility and challenges of implementing rice husk power generation projects in Bangladesh.
PRESENTATION
The document provides information about Akhilesh Kumar's summer training project at South Eastern Coal Field Limited's Gevra project in Chhattisgarh, India. It discusses Coal India Limited, the largest coal producer in India. It then describes the Gevra project, the largest open cast mine in Asia. The project involved studying heavy earth moving machines like dumpers, shovels, drills, and dozers used at the mine. Information about various machines, their specifications and functions is presented. The annual coal production for 2012-2013 is reported and plans to increase production capacity for 2013-2014 through larger machines are mentioned.
Environmental Management Practices in a Super Thermal Power Plant.
This document discusses environmental management practices at NTPC's Super Thermal Power Plant in Kaniha, India. It begins with an overview of thermal power plants and their environmental impacts. It then discusses NTPC, India's largest power producer, and its 3000MW Kaniha plant. The document outlines various environmental problems caused by thermal plants and the steps NTPC takes to mitigate them at Kaniha, including an effluent treatment plant, ash water recirculation, and solar power generation. It provides a case study of Kaniha's zero discharge system that treats and recycles all water. The document concludes that while thermal plants are necessary for India's development, strong environmental policies and practices are also needed.
Rampal power-plant-presentation
This document provides information about the Rampal Power Plant group presentation. It includes the list of group members, project details, environmental issues, and the government's response. The key points are:
- The presentation is about the Rampal Power Plant located in Khulna, Bangladesh.
- It will be a 2600 MW coal-fired power plant built 14 km from the Sundarbans mangrove forest.
- There are concerns about the environmental and health impacts of coal transportation and emissions on the Sundarbans ecosystem and local communities.
Grassroots Technological Innovations.pdf
1. The National Innovation Foundation - India (NIF) was founded in 2000 to promote grassroots innovations in India. It has scouted over 2,25,000 ideas from indigenous innovators across India.
2. NIF supports grassroots innovators through various functions like validation and value addition of innovations, intellectual property management, enterprise development, and dissemination of innovations. It has supported over 1000 projects and transferred 89 technologies to licensees.
3. Examples are provided of successful start-ups by grassroots innovators in India that were supported by NIF, including innovations in groundnut harvesting, paddy threshing, tree climbing, herbal processing, and biomass gasification. These start-
Presentation
This presentation discusses hybrid cogeneration power plants. It begins by defining cogeneration as the simultaneous generation of electricity and steam. It then discusses the types of industries that can benefit from cogeneration and the advantages it provides in reducing costs compared to using diesel generators. The presentation provides details on typical cogeneration plant components, configurations, costs and financial metrics. It also discusses policy support in India for biomass projects and the viability of napier grass as a fuel. Overall, the presentation provides an overview of hybrid cogeneration plants and makes a proposal for a comprehensive solution to set up a 3 MW plant.
Thermal Power Plant
Thermal Power Plant located in Ohio generates electricity from coal. It has a capacity of 2000 MW and supplies 1.5 million customers. The plant receives 21,000 tons of coal per day via barge, rail, and trucks. Coal is pulverized and fed into boilers heated to 1000°C to power turbines that generate electricity. Emissions are controlled through scrubbers that absorb 92% of sulfur and particulate pollutants and a SCR system that converts nitrogen oxides to pure nitrogen using ammonia. Ash and scrubber byproducts are reused in concrete, roads, and drywall.
Building a New Economy: Creating Value from Waste
An expert discusses building a new economy based on creating value from waste in Oman. Key points include:
- Rapid industrial growth in Sohar is increasing waste production which can be managed through transformation rather than disposal.
- Wastes like plastic, food, and e-waste can be transformed into valuable products and materials through approaches like integrated resource recovery (IR2).
- IR2 produces efficient transformation of wastes to generate energy and materials, treating wastes as resources. This prevents pollution while enhancing employment, income, and industry sustainability.
Fly ash as a wood substitute
Fly ash is a waste material produced from coal combustion in thermal power plants that causes pollution problems. It can be used as a wood substitute material to create doors, windows, furniture and other wood products in an environmentally friendly and cost effective way. A proposed plant would produce 12,000 square meters of fly ash composite doors and panels annually, requiring an investment of $263,000. Fly ash products are stronger, more durable and require less maintenance than wood while utilizing an industrial waste.
industrial training ppt
The document provides an overview of Punjab Chemicals and Crop Protection Ltd., including its history, departments, manufacturing plants, and effluent treatment processes. It describes that PCCPL is located in Bhankarpur, India, employs 500 people, and is the world's largest producer of oxalic acid and its derivatives. Key departments discussed include Maintenance, Refrigeration, Boiler House, Electrical, Oxalic Acid Plant, Sodium Nitrite Plant, and Effluent Treatment Plant.
Training report-hzl-cszl
This document provides a summary of Anil Maurya's practical training report at Hindustan Zinc Limited's Chanderia Lead-Zinc Smelter in Chittorgarh, Rajasthan from July 16 to August 16, 2013. The report describes the various processes at the smelter plant including the sinter plant, zinc circuit, wet gas scrubber system, and lead circuit. It also includes an introduction to the company and location, safety procedures, abbreviations used, and the power and motor control systems. The sinter plant section focuses on raw material handling, proportioning, the sinter machine, product handling, and ventilation systems. Large motors up to 2600KW are used including the SO2
Vot agrosack from kenaf fibre presentation
The document discusses a project report on VOT (Vegetable Oil Treated) agro-sacks. Some key points:
- MOT (Mineral Oil Treated) agro-sacks have been banned for exceeding acceptable unsaponifiable matter levels. VOT sacks contain safe levels and do not contaminate commodities.
- There is global demand for VOT sacks as standards have been updated to ban MOT sacks and accept VOT sacks for commodities.
- The report proposes cultivating kenaf in Nigeria for use in producing VOT sacks, as kenaf fiber is strong and Nigeria's climate is suitable. It provides details on machinery and costs required for a 400
Final work
This document provides details about the Vidhyadhar Nagar development project in Jaipur, India. It was developed on 400 hectares of land 3.5 km from Jaipur city between 1980-1986. The master plan was designed by architect B.V. Doshi based on principles of sustainability, energy efficiency, and resilience to natural disasters inspired by traditional Jaipuri city planning principles. The development included residential, commercial, and institutional areas organized around a central spine and integrated green spaces with the goal of becoming a self-sufficient, environmentally-friendly city.
International roundup a comprehensive report on the state of the global mac...
The document discusses Guatemala's macadamia industry, noting that over 1.2 million macadamia trees are planted across 9,000 hectares of land, with 90% of macadamia farms also operating coffee farms. It provides details on cultivation conditions, varieties planted, harvesting and processing methods used, as well as concerns about wind damage, nutrition, and diseases affecting production. Future production estimates indicate shelled kernel production could reach over 2,000 metric tons annually by 2022.
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC is India's largest power company established in 1975. NTPC operates the 2600 MW Korba Super Thermal Power Plant located in Chhattisgarh, India. The plant sources coal from local mines using a merry-go-round rail system. The coal is crushed and milled before being burned in the boiler to produce steam that drives the turbine generator, producing electricity. Flue gases pass through an electrostatic precipitator before being released through the chimney. The generator outputs electricity at 15.75 kV which is stepped up to 400 kV by transformers before connecting to the transmission grid.
Plat design on cashew processing
This document provides information for planning a cashew processing plant, including site selection factors, raw material availability, equipment specifications, process flow chart, material and energy balances, and a Gantt chart schedule. Key factors for site selection include climate, transportation access, and raw material availability. The process flow involves cleaning, soaking, roasting, shelling, grading, drying, peeling and packaging cashew kernels. Equipment specifications and capacities are listed for each stage.
Protected Cultivation
This document provides information about protected cultivation and precision farming. It discusses different types of greenhouses like polyhouses, shade net houses, and tunnels. It outlines the optimal environmental parameters for plant growth in protected structures like temperature, humidity, light, carbon dioxide, and air flow. It also discusses the role of an agricultural engineer in designing protected structures and instrumentation used to monitor the microclimate. Examples of different greenhouse designs seen on farm visits are provided. The document concludes with examples of greenhouse technologies used to produce crops year-round.
Renewable Gas for the large industry sector - The road to Ireland's low carbo...
Presentation from a Renewable Gas event held on the 15th March 2016. Outlines how large industries can access renewable heat.
biomass_gasification (1).ppt
Ankur Scientific Energy Technologies Pvt. Ltd. proposes using biomass gasification and distributed power generation to provide sustainable economic development for rural areas of India and Africa. The company focuses on implementing distributed power generation systems from 500 kWe to 2 MWe, connected to rural 11 kV grids, and smaller 10-kWe systems for individual village electrification. Biomass gasification is presented as an attractive technology for decentralized distributed generation that addresses issues of biomass resource management and distribution compared to larger centralized plants.
Similar to Presentation adani (20)
Production of-renewable-energy-from-biological-sources
Production of-renewable-energy-from-biological-sources
Environmental Management Practices in a Super Thermal Power Plant.
Environmental Management Practices in a Super Thermal Power Plant.
International roundup a comprehensive report on the state of the global mac...
International roundup a comprehensive report on the state of the global mac...
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
Renewable Gas for the large industry sector - The road to Ireland's low carbo...
Renewable Gas for the large industry sector - The road to Ireland's low carbo...
Recently uploaded
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Recently uploaded (20)
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Presentation adani
- 1. Presentation on industry visit Submitted by:-VINAL R WAHANE
- 2. BASIC INFORMATION • NAME :- ADANI POWER • • ADDRESS:- MIDC ,TIRODA.(80 KM FROM NAGPUR) • ONE OF THE FIRST 660 MW POWER PLANT IN MAHARASHTRA • ALL EQUIPMENT ARE CHINA MADE • 4 Million tonnes of coal per year . • Total 1750 hectares (including 1600 hectares of Forest Land) is used. • PHONE NO:- MR GHIKE((9764600071) MR GOKHLE(9823093546) • NAME OF DEPT. HEAD:- HR- MR SANJAY ARGADE LANDMR JAYANT GHIKE CIVIL/OPERATIONS MR BHARDWAJ SECURITY KERNEL ROY
- 3. COMPANY PRODUCT RANGE POWER(ELECTRICITY) 66O X 5 MW
- 4. observation 1>Forest was destroyed. 2>Water is reused. 3>security in plant 4>robotics and automation is used in production area.
- 5. • Receipt / Storage / Quality • Emphasis on Quality • Maintenance practices • Inventory Management System
- 6. COMPANY PRODUCT RANGE POWER(ELECTRICITY) 66O X 5 MW
- 7. RAW MATERIAL AND PRODUCTION PROCESS:- • WATER RESERVOIR • COAL • PETROL/ DIESEL • THE PROCESS OF THERMAL POWER PLANT IS USED FOR ELECRICITY PRODUCTION.
- 8. IMPROVEMENT AREA:- • A> WASTE MATERIAL (ASH) UTILIZATION. • B> COAL AVAILABILITY IS LIMITED. • C> POWER CANT BE STORED
- 9. SNAPSHOTS:-
- 10. THANK YOU