This document provides the technical specifications for two precision digital levels, the DWL3000XY and DWL3500XY. [1] The DWL3000XY can measure from 0 to ±90 degrees in single axis mode and from 0 to ±15 degrees in dual axis mode, with a resolution of 0.01 degrees. [2] The DWL3500XY has a smaller measurement range of 0 to ±20 degrees in single axis mode and 0 to ±10 degrees in dual axis mode, but a higher resolution of 0.001 degrees. [3] Both models operate between -10 to 50 degrees Celsius, are powered by batteries or USB, and include Bluetooth and PC software for data logging and analysis.
The document provides information about various GPS and navigation products offered by GPS India Networks Pvt. Ltd., including:
- Handheld GPS units like the eTrex 10, eTrex 20/30, GPSMAP 62/78, and Oregon 450/550.
- Car navigation units like the Nuvi 2465LM/2565LM and Nuvi 40 LM/50LM for the Indian market.
- Accessories like data cables, map cards, carry cases, and repairs.
- Contact information for GPS India Networks Pvt. Ltd. in New Delhi, India.
The testo 881 is a versatile thermal imager with good image quality. It has a 160 x 120 pixel detector, temperature measurement accuracy of less than 50 mK, and interchangeable lenses. Additional features include a digital camera, power LEDs, humidity measurement, and the ability to measure temperatures up to 550°C with an optional high temperature measurement. The testo 881 provides thermal images and real images to analyze temperature differences and capture measurement data.
The testo 882 is a thermal imager with a 320 x 240 pixel detector, temperature measurement range of -20°C to +350°C, and thermal sensitivity of less than 60mK. It features a 32° lens, integrated digital camera, voice recording, and optional high temperature measurement up to 550°C. The testo 882 provides excellent image quality and precise temperature measurement for analyzing thermal images.
The Leica DISTOTM D510 laser distance meter allows for precise outdoor measurements through its pointfinder with 4x zoom, IP65 water and dust protection, and 360° tilt sensor. It can measure distances not possible with conventional meters and its Bluetooth Smart technology and free app prepare it for future applications. Its tough housing and keypad can be cleaned easily under water and it is usable in all weather conditions. The 360° tilt sensor allows for horizontal distance and angle measurements on surfaces without reflective targets.
This document provides specifications for the SSC-N12/N12A 540 TV line compact security camera. It has a 1/3-Type "Super HAD CCD II" image sensor that provides high resolution of 540 horizontal TV lines and high sensitivity of 0.3 lx. Key features include day/night mode, noise reduction, backlight compensation, and automatic tone reproduction. It has a compact design measuring approximately 85mm in diameter and 64mm in height, and runs on 12V DC with low power consumption of 0.9W maximum.
This document provides specifications for the SSC-G113/G113A analog color fixed cameras. The cameras feature a 650 TV line resolution and high sensitivity of 0.15 lx. Key features include day/night functionality, noise reduction, backlight compensation, and automatic tone reproduction. The cameras have a compact design and low power consumption of 1.4W. They are suitable for security applications with high image quality in low light conditions.
This document summarizes the specifications of the SSC-N14/N14A 650 TV line compact security camera. It has a 1/3-type EXview HAD CCD II image sensor that provides 650 horizontal TV lines of resolution and a high sensitivity of 0.3 lx. Key features include day/night mode, noise reduction, backlight compensation, and automatic tone reproduction. It has flexible camera angle adjustment and consumes 0.9W of power maximum. The camera is designed to be compact with dimensions of 85.2mm diameter by 63.5mm and weighs 140g.
The document provides information about various GPS and navigation products offered by GPS India Networks Pvt. Ltd., including:
- Handheld GPS units like the eTrex 10, eTrex 20/30, GPSMAP 62/78, and Oregon 450/550.
- Car navigation units like the Nuvi 2465LM/2565LM and Nuvi 40 LM/50LM for the Indian market.
- Accessories like data cables, map cards, carry cases, and repairs.
- Contact information for GPS India Networks Pvt. Ltd. in New Delhi, India.
The testo 881 is a versatile thermal imager with good image quality. It has a 160 x 120 pixel detector, temperature measurement accuracy of less than 50 mK, and interchangeable lenses. Additional features include a digital camera, power LEDs, humidity measurement, and the ability to measure temperatures up to 550°C with an optional high temperature measurement. The testo 881 provides thermal images and real images to analyze temperature differences and capture measurement data.
The testo 882 is a thermal imager with a 320 x 240 pixel detector, temperature measurement range of -20°C to +350°C, and thermal sensitivity of less than 60mK. It features a 32° lens, integrated digital camera, voice recording, and optional high temperature measurement up to 550°C. The testo 882 provides excellent image quality and precise temperature measurement for analyzing thermal images.
The Leica DISTOTM D510 laser distance meter allows for precise outdoor measurements through its pointfinder with 4x zoom, IP65 water and dust protection, and 360° tilt sensor. It can measure distances not possible with conventional meters and its Bluetooth Smart technology and free app prepare it for future applications. Its tough housing and keypad can be cleaned easily under water and it is usable in all weather conditions. The 360° tilt sensor allows for horizontal distance and angle measurements on surfaces without reflective targets.
This document provides specifications for the SSC-N12/N12A 540 TV line compact security camera. It has a 1/3-Type "Super HAD CCD II" image sensor that provides high resolution of 540 horizontal TV lines and high sensitivity of 0.3 lx. Key features include day/night mode, noise reduction, backlight compensation, and automatic tone reproduction. It has a compact design measuring approximately 85mm in diameter and 64mm in height, and runs on 12V DC with low power consumption of 0.9W maximum.
This document provides specifications for the SSC-G113/G113A analog color fixed cameras. The cameras feature a 650 TV line resolution and high sensitivity of 0.15 lx. Key features include day/night functionality, noise reduction, backlight compensation, and automatic tone reproduction. The cameras have a compact design and low power consumption of 1.4W. They are suitable for security applications with high image quality in low light conditions.
This document summarizes the specifications of the SSC-N14/N14A 650 TV line compact security camera. It has a 1/3-type EXview HAD CCD II image sensor that provides 650 horizontal TV lines of resolution and a high sensitivity of 0.3 lx. Key features include day/night mode, noise reduction, backlight compensation, and automatic tone reproduction. It has flexible camera angle adjustment and consumes 0.9W of power maximum. The camera is designed to be compact with dimensions of 85.2mm diameter by 63.5mm and weighs 140g.
The document is a product comparison table that compares the specifications of various Axis fixed network cameras and dome network cameras. It lists the technical specifications of each camera model, such as image sensor type, lens details, video compression formats, maximum video resolution, frames per second, audio support, alarm inputs/outputs, security features, and power requirements. Notations are provided to indicate variations between certain product models in a given column.
This document provides specifications for the SSC-N24/N24A 650 TV line security camera. It has a high resolution of 650 horizontal TV lines and high sensitivity with a minimum illumination of 0.15 lx for color and 0.01 lx for black and white. Key features include a 3.7x variable focal lens, day/night functionality, noise reduction, backlight compensation, and automatic white balance. It has low power consumption of 1.7W maximum and measures 121.6mm in diameter by 86.5mm with a weight of 320g.
This document provides specifications for the SSC-N13/N13A 650 TV line compact security camera. The camera features a 1/3-type EXview HAD CCD II sensor providing 650 horizontal TV lines of resolution and high sensitivity of 0.4 lx. It has a fixed 3.0 mm focal length lens, day/night functionality, noise reduction, backlight compensation, and automatic tone reproduction. The camera is compact at 84mm diameter and 53mm height, with low power consumption of 0.9W maximum.
This security camera has high resolution of 540 TV lines and high sensitivity of 0.15 lx. It uses a 1/3-type Super HAD CCD II sensor and Sony's digital signal processor Effio-E. The 3.7x variable focal length lens provides a wide viewing angle that can be adjusted through a three-hinge structure. The camera has features like day/night mode, noise reduction, backlight compensation, and automatic white balance adjustment.
The document summarizes the results of a 3D scan comparison between a reference model (Sheet Metal_R) and test model (Sheet Metal_T). It found 1,686,643 matching data points with an average deviation of 0.3mm and standard deviation of 0.9mm. The maximum upper deviation was 36.1mm and maximum lower deviation was -32.4mm, with 7928 outliers found. The deviation distribution chart shows that most points (50%) fell within 1 standard deviation of the mean.
The SCD-2020R dome camera can capture high resolution images in total darkness down to 0 Lux using its built-in IR LED illuminators. It has a 3.6mm lens and 600TVL resolution for monitoring compact areas. The camera also features ICR day and night technology, automatic IR intensity adjustment, and can function down to 0 Lux with its IR lights on from up to 7m away.
This document summarizes the specifications of the SCD-2010/2030 mini dome security cameras. The cameras have 600TVL resolution, a low minimum illumination of 0.04 lux, and fixed 3mm or 6mm lenses ideal for indoor use. They operate using 12V DC power and have pan/tilt functionality, various image processing features, and communicate using coaxial control. The cameras measure 104mm x 67mm and weigh 180g, making them compact and lightweight.
This guide helps users select the correct ultrasonic sensor for their application from MaxSonar's product line. It provides an overview of each sensor model, describing their features, specifications, recommended uses, and part numbers. A selection process is outlined to compare sensor beam widths and output signals to determine the best option based on the application.
The testo 470 rpm measuring instrument offers both optical and mechanical rpm measurement through easily attachable adapters. It measures rpm, speeds, and lengths with an accuracy of ±0.02% and stores mean, minimum, maximum and last measurement values. The robust design protects the instrument from impact with its SoftCase. Accessories include reflective markers, measuring wheels, and calibration certificates.
The document describes the specifications of the C-24 Series of security cameras from Xenyum security products. The series includes Models XC-240, XC-242, and XC-245 which use 1/3" SONY Color Super HAD CCD image sensors and have optional infrared LEDs for night vision up to 20 meters. The cameras have varifocal lenses, 3-axis adjustment, and stylish designs for easy installation. The document provides detailed technical specifications for each camera model including image sensor details, resolution, lens type, minimum illumination, power requirements, and dimensions.
This document summarizes the specifications of the C-23 Series of cameras from Xenyum security products. It includes three camera models - the XC-230, XC-232, and XC-235. All three cameras use Sony Color Super HAD CCD sensors and have IR LEDs for night vision up to 20 meters. The cameras are easy to install, waterproof, and vary in resolution and minimum illumination levels. They have automatic features like white balance, auto exposure, and backlight compensation. The cameras are IP66 rated and operate between -20°C and 50°C.
This document summarizes a pulse total station called the GPT-3000LN/N series. It can measure distances of up to 350m without a reflector and has five key features: easier operation with an alphanumeric keyboard, more precise measurements using pulse-laser technology, additional software applications for greater productivity, safer operation as a laser class 1, and longer measurement ranges of up to 1,200m. It also lists detailed specifications of the instrument such as measurement accuracy, range, and dimensions.
This document provides specifications for three digital lux meters - the KM-LUX-99, KM-LUX-100K, and KM-LUX-200K. The lux meters measure light levels and have features like data hold, auto zero adjustment, and a backlit LCD display. They vary in measurement ranges from 0-2,000 lux up to 0-200,000 lux and have measurement resolutions of 1 lux or 0.1 lux. The document also lists electrical specifications, dimensions, weight, and adequate light level guidelines for different locations.
The document describes the specifications of the Topcon DL-101C/102C electronic digital level. It can automatically measure height and distance digitally when used with a patterned staff. Measurements are displayed within 3 seconds. The digital display and automatic measuring provide more precise and reliable measurements compared to visual methods. It stores data on a compact flash card and has an alphanumeric keyboard, built-in timer, and rechargeable battery.
The document discusses three digital lux meter models - KM-LUX-99, KM-LUX-100K, and KM-LUX-200K. The meters precisely measure light levels across various ranges in lux or footcandles. They have features like LCD displays, low battery indicators, light sensors, and data hold. The meters are compact, accurate, and durable. Recommended light levels for different tasks are also provided in footcandles or lux.
This document summarizes a precision caliper thickness tester used to measure the thickness of flexible materials like paper, films, and laminates. It has a digital caliper gauge mounted on a base with a dead weight that applies a constant 500g/cm2 pressure. A key feature is its motorized mechanism that lifts and releases the measuring foot in a simple cyclic motion, allowing for fast, reproducible measurements at a rate of 6-10 readings per minute. Models are available with different measurement ranges and resolutions down to 1 micron.
This document provides technical specifications for the μQC Microscope. It has a vertical scan range of ≤ 500μm and vertical and lateral resolutions of ≤ 10nm and 0.13-2.21μm respectively. The microscope uses non-contact white light interferometry and has capabilities such as automatic depth, volume, and surface roughness measurements. It is suited for surface characterization of materials like ceramics and metals.
This document summarizes the specifications of three camera models in the C-83 Series: the XC-830, XC-832, and XC-835. All three cameras have 1/3" SONY Color Super HAD CCD sensors, varifocal lenses, anti-grip brackets, and are waterproof to IP66 standards. The key differences between the models are the number of pixels and effective pixels, resolution, minimum illumination, and IR distance, with the XC-835 having the best specifications of the three.
Dot by Re-Sound offers more gain on a patient’s
ear than any other receiver-in-the-ear hearing instrument. More real gain means more patients can benefit.
This document summarizes technical specifications for different models of a caliper thickness gauge that uses a dead weight system to measure the thickness of flexible and semi-rigid materials. It describes features such as the measuring pressure of 500g/cm2 provided by a dead weight, flat anvil diameters of 10mm, and digital models with resolutions of 0.01mm or 0.001mm. Tables compare the specifications of various analog and digital models, including their lifting mechanisms, sensor types, measurement ranges, resolutions, and accuracies.
The document is a product comparison table that compares the specifications of various Axis fixed network cameras and dome network cameras. It lists the technical specifications of each camera model, such as image sensor type, lens details, video compression formats, maximum video resolution, frames per second, audio support, alarm inputs/outputs, security features, and power requirements. Notations are provided to indicate variations between certain product models in a given column.
This document provides specifications for the SSC-N24/N24A 650 TV line security camera. It has a high resolution of 650 horizontal TV lines and high sensitivity with a minimum illumination of 0.15 lx for color and 0.01 lx for black and white. Key features include a 3.7x variable focal lens, day/night functionality, noise reduction, backlight compensation, and automatic white balance. It has low power consumption of 1.7W maximum and measures 121.6mm in diameter by 86.5mm with a weight of 320g.
This document provides specifications for the SSC-N13/N13A 650 TV line compact security camera. The camera features a 1/3-type EXview HAD CCD II sensor providing 650 horizontal TV lines of resolution and high sensitivity of 0.4 lx. It has a fixed 3.0 mm focal length lens, day/night functionality, noise reduction, backlight compensation, and automatic tone reproduction. The camera is compact at 84mm diameter and 53mm height, with low power consumption of 0.9W maximum.
This security camera has high resolution of 540 TV lines and high sensitivity of 0.15 lx. It uses a 1/3-type Super HAD CCD II sensor and Sony's digital signal processor Effio-E. The 3.7x variable focal length lens provides a wide viewing angle that can be adjusted through a three-hinge structure. The camera has features like day/night mode, noise reduction, backlight compensation, and automatic white balance adjustment.
The document summarizes the results of a 3D scan comparison between a reference model (Sheet Metal_R) and test model (Sheet Metal_T). It found 1,686,643 matching data points with an average deviation of 0.3mm and standard deviation of 0.9mm. The maximum upper deviation was 36.1mm and maximum lower deviation was -32.4mm, with 7928 outliers found. The deviation distribution chart shows that most points (50%) fell within 1 standard deviation of the mean.
The SCD-2020R dome camera can capture high resolution images in total darkness down to 0 Lux using its built-in IR LED illuminators. It has a 3.6mm lens and 600TVL resolution for monitoring compact areas. The camera also features ICR day and night technology, automatic IR intensity adjustment, and can function down to 0 Lux with its IR lights on from up to 7m away.
This document summarizes the specifications of the SCD-2010/2030 mini dome security cameras. The cameras have 600TVL resolution, a low minimum illumination of 0.04 lux, and fixed 3mm or 6mm lenses ideal for indoor use. They operate using 12V DC power and have pan/tilt functionality, various image processing features, and communicate using coaxial control. The cameras measure 104mm x 67mm and weigh 180g, making them compact and lightweight.
This guide helps users select the correct ultrasonic sensor for their application from MaxSonar's product line. It provides an overview of each sensor model, describing their features, specifications, recommended uses, and part numbers. A selection process is outlined to compare sensor beam widths and output signals to determine the best option based on the application.
The testo 470 rpm measuring instrument offers both optical and mechanical rpm measurement through easily attachable adapters. It measures rpm, speeds, and lengths with an accuracy of ±0.02% and stores mean, minimum, maximum and last measurement values. The robust design protects the instrument from impact with its SoftCase. Accessories include reflective markers, measuring wheels, and calibration certificates.
The document describes the specifications of the C-24 Series of security cameras from Xenyum security products. The series includes Models XC-240, XC-242, and XC-245 which use 1/3" SONY Color Super HAD CCD image sensors and have optional infrared LEDs for night vision up to 20 meters. The cameras have varifocal lenses, 3-axis adjustment, and stylish designs for easy installation. The document provides detailed technical specifications for each camera model including image sensor details, resolution, lens type, minimum illumination, power requirements, and dimensions.
This document summarizes the specifications of the C-23 Series of cameras from Xenyum security products. It includes three camera models - the XC-230, XC-232, and XC-235. All three cameras use Sony Color Super HAD CCD sensors and have IR LEDs for night vision up to 20 meters. The cameras are easy to install, waterproof, and vary in resolution and minimum illumination levels. They have automatic features like white balance, auto exposure, and backlight compensation. The cameras are IP66 rated and operate between -20°C and 50°C.
This document summarizes a pulse total station called the GPT-3000LN/N series. It can measure distances of up to 350m without a reflector and has five key features: easier operation with an alphanumeric keyboard, more precise measurements using pulse-laser technology, additional software applications for greater productivity, safer operation as a laser class 1, and longer measurement ranges of up to 1,200m. It also lists detailed specifications of the instrument such as measurement accuracy, range, and dimensions.
This document provides specifications for three digital lux meters - the KM-LUX-99, KM-LUX-100K, and KM-LUX-200K. The lux meters measure light levels and have features like data hold, auto zero adjustment, and a backlit LCD display. They vary in measurement ranges from 0-2,000 lux up to 0-200,000 lux and have measurement resolutions of 1 lux or 0.1 lux. The document also lists electrical specifications, dimensions, weight, and adequate light level guidelines for different locations.
The document describes the specifications of the Topcon DL-101C/102C electronic digital level. It can automatically measure height and distance digitally when used with a patterned staff. Measurements are displayed within 3 seconds. The digital display and automatic measuring provide more precise and reliable measurements compared to visual methods. It stores data on a compact flash card and has an alphanumeric keyboard, built-in timer, and rechargeable battery.
The document discusses three digital lux meter models - KM-LUX-99, KM-LUX-100K, and KM-LUX-200K. The meters precisely measure light levels across various ranges in lux or footcandles. They have features like LCD displays, low battery indicators, light sensors, and data hold. The meters are compact, accurate, and durable. Recommended light levels for different tasks are also provided in footcandles or lux.
This document summarizes a precision caliper thickness tester used to measure the thickness of flexible materials like paper, films, and laminates. It has a digital caliper gauge mounted on a base with a dead weight that applies a constant 500g/cm2 pressure. A key feature is its motorized mechanism that lifts and releases the measuring foot in a simple cyclic motion, allowing for fast, reproducible measurements at a rate of 6-10 readings per minute. Models are available with different measurement ranges and resolutions down to 1 micron.
This document provides technical specifications for the μQC Microscope. It has a vertical scan range of ≤ 500μm and vertical and lateral resolutions of ≤ 10nm and 0.13-2.21μm respectively. The microscope uses non-contact white light interferometry and has capabilities such as automatic depth, volume, and surface roughness measurements. It is suited for surface characterization of materials like ceramics and metals.
This document summarizes the specifications of three camera models in the C-83 Series: the XC-830, XC-832, and XC-835. All three cameras have 1/3" SONY Color Super HAD CCD sensors, varifocal lenses, anti-grip brackets, and are waterproof to IP66 standards. The key differences between the models are the number of pixels and effective pixels, resolution, minimum illumination, and IR distance, with the XC-835 having the best specifications of the three.
Dot by Re-Sound offers more gain on a patient’s
ear than any other receiver-in-the-ear hearing instrument. More real gain means more patients can benefit.
This document summarizes technical specifications for different models of a caliper thickness gauge that uses a dead weight system to measure the thickness of flexible and semi-rigid materials. It describes features such as the measuring pressure of 500g/cm2 provided by a dead weight, flat anvil diameters of 10mm, and digital models with resolutions of 0.01mm or 0.001mm. Tables compare the specifications of various analog and digital models, including their lifting mechanisms, sensor types, measurement ranges, resolutions, and accuracies.
Electrical and Acoustic Characteristics.
Dimensions 28x4mm
AC Impedance 8±15%Ωat 2000Hz
Rated Input Power 1W
Max. input power 1.5W
Resonance Frequency 580±20%Hz
Output Sound Pressure Level 93±3dB/0.1W 0.1m at 0.6,0.8,1.0,1.2KHz Average
Frequency Response Fo~6KHz
Operating Temperature -20~+65℃
Storage Temperature -30~+70℃
The GTS-230N series total station from Topcon has a rugged IP66 weatherproof design, 24-key keyboard, large graphical display, and long-lasting battery that provides 10 hours of use from a single charge. It also has powerful measurement capabilities and internal memory to store up to 24,000 data points, making it suitable for a variety of surveying applications even in challenging field conditions.
This document describes an image processing software called ICONNECT that is used to detect line markings on tires in order to reliably differentiate between tires and spare tires during vehicle assembly. The software analyzes camera images and uses adjustable parameters like position, size, shape, and brightness to detect the markings. It informs the operator of detection accuracy and sends the detection results to a PLC. The system is suitable for variable rim sizes and components present. ICONNECT was selected for its ability to quickly realize the detection concept with flexibility to make software changes through a simple interface.
App098 en image-processing-system-detection-markingsISATECK
This document summarizes an image processing software called ICONNECT that is used to reliably detect line markings on tires in an automated vehicle assembly process. The software analyzes camera images and uses adjustable parameters to identify markings that may differ in position, size, shape, brightness, and orientation. It displays detection results and error status on a monitor and transfers information to a PLC. The system is suitable for different rim types and sizes and can detect markings even with varying lighting conditions. ICONNECT was selected for this application due to its graphical interface that allows flexible software adaptations without direct programming.
1. The document provides instructions for using the Digi-Pas Digital Level DWL-1000. It includes details on the kit contents, technical specifications, operation instructions, and calibration procedures.
2. Key features of the digital level include high resolution and accuracy for measuring angles, single and dual axis measurement modes, low battery indication, automatic shut-off, and a buzzer function.
3. The calibration procedure involves placing the level in six positions and pressing buttons to confirm the level's zero points are properly calibrated before use.
This document summarizes specifications for different models of caliper thickness gauges that use a dead weight system to measure the thickness of materials. The gauges can measure materials from 0-10mm or 0-1mm in thickness with a resolution of 10 or 1 microns. They apply a constant pressure of 500g/cm2 using a dead weight and dial or digital sensors to measure and display the thickness. The document provides a comparison of various analog and digital models that differ in range, resolution, power source, and lifting mechanism.
Similar to Precision machinist levels digipas dwl3000 xy brochure-www.DIGIPAS.co.uk (20)
This document provides information on various Digi-Pas digital level models and their specifications. It lists contact information for Digi-Pas representatives around the world and describes the key features of their 2-axis digital levels. These include high resolution angular and vibration measurement, data logging capabilities, temperature compensation, and wireless connectivity options for remote monitoring and analysis. Their 2-axis display and remote data collection capabilities provide time-saving advantages over traditional single-axis levels.
This document provides contact information for various Digi-Pas representatives around the world and lists several Digi-Pas digital level product lines including their key features and specifications. It promotes Digi-Pas as an innovation-driven manufacturer of professional digital levels that offer advantages over traditional spirit levels through advanced digital technology.
This document provides specifications for the DWL3000XY digital level and vibrometer. It can measure angles from 0 to ±90 degrees in single axis mode and 0 to ±45 degrees in dual axis mode, with a resolution of 0.01 degrees. Additional features include a color LCD display, vibration measurement capability, data transfer to a computer via USB, and self-calibration. Usage instructions and screenshots of the display are also presented.
This document provides instructions for calibrating the Digi-Pas DWL80E digital level. It has the following key steps:
1. Push the CAL button to enter calibration mode and place the level flat on a surface to calibrate the first position.
2. Flip the level horizontally, press MODE, and calibrate the second position.
3. Place the level vertically and calibrate the third position by pressing MODE.
4. Flip the level to the reverse vertical position, press MODE, and calibrate the final position. Calibration is then complete. The level is warranted for one year against defects.
The DWL 200 is a 200 mm digital mini level with resolutions of 0.1° or 0.05°. It has an impact resistant ABS plastic body with an aluminum base and displays angles from 0° to +/- 90°. It has features such as a hold function, magnetic base, and auto-off after 3 minutes. The level is calibrated in the factory and can be recalibrated by the user if needed by placing it in flat, reverse horizontal, vertical, and reverse vertical positions.
The DWL600 series is an electronic level designed to fit into aluminum structures. Model DWL600E displays measurements in degrees, slope percentages, and inches/feet. It has an inverted reading, heavy duty aluminum body, and measures angles from 0 to +/- 90 degrees with high resolution. The level has features like auto-off, hold function, backlight, and memory storage and operates on AAA/9V batteries.
This document provides information on Digi-Pas, a manufacturer of digital levels. It lists their various product lines including pocket-sized, module, torpedo, heavy-duty, and waterproof digital levels. Key features highlighted are precision and accuracy, easy-to-read digital displays, auto-off functions, and integrated magnets or impact resistance depending on the product line. Contact information is provided for Digi-Pas locations around the world.
Webinar: Designing a schema for a Data WarehouseFederico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
1. TECHNICAL SPECIFICATIONS TM
Digi-Pas
INNOVATED for ®
PROFESSIONALS in ...
DWL3000XY DWL3500XY
A division of VENTURA Group of Companies
Measurement Range 0.00° to ± 90.00° 0.000° to ± 20.000° **
(Single Axis Mode)
2
Measurement Range 0.00° to ± 15.00° ** 0.000° to ± 10.000° **
(Dual Axis Mode)
Resolution 0.01° (175µm/M) (0.002 in/ft) 0.001° (≤20µm/M) (0.0002 in/ft)
-Axis
CNC Precision Machine Alignment
Accuracy ± 0.01° at 0.00° ~ ± 10.00° (175µm/M) ± 0.001° at 0.000° ~ ± 2.000° (≤20µm/M)
(0.002 in/ft) (36 Arcsec) (0.0002 in/ft) (3.6 Arcsec)
± 0.03° at other angle ± 0.003° at other angle
Repeatability 0.01° (175µm/M) (0.002 in/ft) 0.001° (≤20µm/M) (0.0002 in/ft)
Vision Measurement Equipments
Vibrometer (Relative g) 1.0 2.0 (Metrology)
Display Colour TFT LCD Colour TFT LCD
Power Supply * 4 x AAA 1.5V Batteries / USB 4 x AAA 1.5V Batteries / USB
Professional
Material PC ABS / Aluminium PC ABS / Cast Iron
Precision Digital Level
Connectivity USB 2.0 Cable (≤ 5 metre) USB 2.0 Cable (≤ 5 metre)
Research Laboratory
Bluetooth (≤30 metre) (Optional) Bluetooth (≤30 metre) (Optional)
PC SYNC Software Basic Edition Basic Edition
h
Professional Edition (Optional) Professional Edition (Optional)
Operating Temperature -10°C to +50°C (Calibrated) -10°C to +50°C (Calibrated) wit Vibrometer
14°F to 122°F (Calibrated) 14°F to 122°F (Calibrated)
Dimension (mm) 188 x 62 x 37 188 x 62 x 37 Semiconductor Production Machines
Nett Weight (Approximate) 580 gram 1100 gram
User Self Calibration Yes Yes
* Alterative Device power can be obtained from External USB Power Source . Model: DWL3000XY
**User may use a customized Digi-Pas® Angle Adaptor® to extend measuring angle beyond stated range. Series
CAUTION
DEALER: Strong Magnet
® PC Sync
Software
JLC-2-03999-99
Digi-Pas
2 Years
Warranty
www.digipas.com
Digi-Pas® DWL3000 XY Products
come with a two years warranty from
JSB TECH Pte Ltd
Data Logging PC Software
Innovative &
www.digipas.com Technology Driven Products TM
Please contact our Global : Product of Singapore Designed by Cambridge Ventura, England (UK)
Products tested by TÜV SÜD, SGS accredited body to comply with CE, FCC & RoHS, calibrated to conform with UKAS, JIS, NIST & DIN, and manufactured under SGS certified ISO quality standards:
Manufacturer Digi-Pas® (Global) Digi-Pas® UK (Europe) Digi-Pas® USA (Americas) Digi-Pas® Japan Digi-Pas® China
info@digipas.com
JSB Tech Pte Ltd Tarax Technology Ltd info@digipasusa.com info@digipas.com
Representatives info@digipas.com info@taraxtech.co.uk
ISO 14001:2004 ISO 9001:2008
Cert No: TWO4/00450EM Cert No: QSP00050
2. PROFESSIONAL PRECISION DIGITAL LEVEL
Innovative &Technology Driven Products TM
DWL3000 XY Series Device
DWL3000 XY and DWL3500 XY are 2-Axis High Precision Digital Level & Machinist Level with built-in
PC Sync Professional Software
Vibrometer, embedded with advanced MEMS digital sensor technology, designed for professional & DUAL AXIS ANGLE GRAPH VIBRO GRAPH
trade specialist to achieve high accuracy and concurrent display of angular & vibration measurements.
The device is capable of remote real-time data acquisition, logging & analysis when in synched with PC.
It is highly effective used for quality installation, setting up and maintenance of high precision CNC
machines, test and measuring equipment.
Device Features Device Main Menu ICON
2-Axis colour graphic display of angular & vibration measurements ANGLE METER
Real-time Digital & Analogue display for data logging & analysis Real-time colour graphic display for Single/Dual
High resolution of 0.01°(175 µm/M) or 0.001°(20 µm/M) (3.6 arcsec.) Axis digital & analogue angle measurements & data
acquisition, logging on device screen or computer monitor.
Built-in Vibrometer for Real-time vibration measurement.
USB/Wireless connectivity for remote data logging & analysis in PC. VIBRO METER
Real-time colour graphic display for vibration
Device
Device TFT LCD Displays
measurement and data logging on device screen or
computer monitor.
ALTERNATE ZERO SETTING DUAL AXIS “BUBBLE” METER
Angle Meter
0.001 DEGREE
0˚
+90
Enable user to measure relative angles at a common plane
PC
with respect to a reference angle set to zero.
Software Features
+45
Angle (Degree)
-45˚ 45˚
Digi-Pas® 0
-90˚ 90˚ Time(s)
-45
ABSOLUTE LEVEL SETTING
Digi-Pas ® 0.001 0.001° DEGREE
-90
HOZ. 0.001° Enables user to perform absolute symmetry readings for User-Friendly “Plug & Play” USB Connection for angle & vibration
both “front” & “reverse” (180 degrees) positions of any remote measurement, data acquisition, logging & analysis in computer.
measurement angle.
Vibro Meter
Bluetooth Connectivity (Optional) for wireless remote data acquisition,
+3
Magnitude - mg
+2
+1
SETTING MENU monitoring & logging
0
Time(s)
-1 Enable User to define various parameters on the
-2 device functions.
-3
Advantages of Digi-Pas ® Digital Level
High Speed Acquisition
WIRELESS SYNC (Optional)
Wireless Sync to computer for remote measurement,
data acquisition, logging & analysis. SPEED & PRECISION
Instant 2-Axis concurrent digital display of high resolution 0.01°(175 µm/M) or
0.001°(20 µm/M) (3.6 arcsec.) of levelling & vibration measurements for
HELP MENU time saving and quality professional works.
Enable User to have a quick and easy reference on
Device’s button function at different display screen. CLARITY
Digital colour graphic & numeric display to enable real-time collection of Digi-Pas ® Precision Digital Level
digital angle levelling/alignment data for machine commissioning accountability & analysis.
Advanced Digital MEMS Technology
EFFECTIVE
Reg The remote measurement USB Cable/Wireless capability provide advantages that traditional spirit level
iste
red
Des
ign
is difficult or unable to match. i.e. effectively, only one person is required to level/align a machine Versus
ACCREDITATION
Product accuracy is verified by accredited 3rd party Calibration & Test Service Providers Traditional Spirit Levels
in USA, Japan, UK & Germany to conform with NIST, JIS, UKAS & DIN under ILAC & A2LA
3-Points Contact Base Pendulum & Vial bubble methods
Authorised
Distributors
Online
Retailers
Digi-Pas ® TM
Innovative & Technology Driven Product