The DWL600 series is an electronic level designed to fit into aluminum structures. Model DWL600E displays measurements in degrees, slope percentages, and inches/feet. It has an inverted reading, heavy duty aluminum body, and measures angles from 0 to +/- 90 degrees with high resolution. The level has features like auto-off, hold function, backlight, and memory storage and operates on AAA/9V batteries.

1. Model DWL600 Series
The DWL600 series Electronic Level is designed to be fitted into top quality
Japanese Aluminium Profile structure at 24” length to meet various practical
applications.
Models:
Models Special Feature
DWL600E  Displayed in degree(° slope (%), mm/M and inch/Feet
),
 High quality Japanese Heavy duty corrosion resistant aluminium box level
 Inverted Reading.
Dimension L(615) x H(48) x T(20) mm for 24” Length
DWL600E
Features & Specification: Application:
• Measurement Range 0°~ +/- 90°
 High Resolution 0.05°~ 0.1°
• Operating Temperature 0° ~ 50° C
• Long Battery Life with 3 minutes auto off
• Easy, Clear & Precise Digital Display
• Hold Function to Freeze Display
• Buzzer Sound
 with Build-in Vials
 High quality White Back Light
 Power supply 2 x AAA/ 9V Batteries
(Batteries included)
For further information, please refer to www.digipas.co.uk

2. Model DWL600 Series
CALIBRATION INSTRUCTION OPERATION
Caution: Digi-Pas is calibrated in the Factory for a) Batteries:
maximum accuracy. User only recalibrate unless  The battery compartment is inside the
necessary. end of the right hand side of the level.
 Remove the end cap and place the new
1. Push ONCE on the Cal button then batteries (type AAA/ 9V) in the battery
release.Buzzer starts to beep. compartment
2a. Place Digi-Pas on a flat surface (e.g. Table)  Ensure correct polarity.
Use a finger to Press Mode button ONCE while b) Switching on the Digi-Pas:
wait a few seconds until buzzer beeps.  Switch the Digi-Pas on using the on/off
b. Place Digi-Pas reverse horizontal (180° Press
) switch.
Mode button ONCE and wait a few seconds until  The Digi-Pas can measure angles range
buzzer beeps. 0°~ +/- 90°
c. Place Digi-Pas vertically (-90° and Press
)  press mode button to choose the
Mode button ONCE and wait a few seconds until resolution in degree, slope angle mm/M
buzzer beeps. and inch/Feet
d. Place Digi-Pas reverse vertically (+90° and) c) Buzzer Sound (Acoustic signal):
Press Mode button ONCE and wait a few seconds  The Buzzer Sound are used to indicated
until buzzer beeps. angle of slope stands at 0° 90° and
,
3. Calibration completes when buzzer beep when you “HOLD” a specific reading.
sound stops.  To switch off Acoustic signal, hold the
NOTE : Ensure Digi-pas is kept still during Mode for more than 2 seconds, the
Calibration speaker enunciator will be disappeared.
d) High quality White Back Light
 Enable level working at dark
environment
e) Hold button (Memory functions)
 With the hold button, you can Freeze
Display for reading and the current
measurement result can be saved in the
internal memory.
 Return to normal measuring mode by
pressing Hold button
 To call back the reading in the internal
memory, press Hold button for 3 second.
The previous save reading will be
appearing in the display.
f) Switching off:
 To switch off the Digi-Pas, press the
on/off switch .When not in use more
than 3 min, the Digi-Pas will switches off
automatically.
UK and Europe sales office
Tarax Technology Limited
First Floor, Office 2,
10 Panmure Street,
Dundee,
DD1 2BW.
e:Info@digipas.co.uk
w:www.digipas.co.uk
m:(+44)07825041403
For further information, please refer to www.digipas.co.uk